aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorShawn O. Pearce <spearce@spearce.org>2007-02-05 21:09:25 -0500
committerShawn O. Pearce <spearce@spearce.org>2007-02-05 21:09:25 -0500
commit6e411d2044072072692f2d9cf9d633421ef6017a (patch)
treeeaf565339f61d60c664aaf74b87019947e864b0a
parent6c3aac1c69ea0bcb2896bec96a01fdf8aa6176fa (diff)
downloadgit-6e411d2044072072692f2d9cf9d633421ef6017a.tar.gz
git-6e411d2044072072692f2d9cf9d633421ef6017a.tar.xz
Initial draft of fast-import documentation.
This is a first pass at the manpage for git-fast-import. I have tried to cover the input format in extreme detail, creating a reference which is more detailed than the BNF grammar appearing in the header of fast-import.c. I have also covered some details about gfi's performance and memory utilization, as well as the average learning curve required to create a gfi frontend application (as it is far lower than it might appear on first glance). The documentation still lacks real example input streams, which may turn out to be difficult to format in asciidoc due to the blank lines which carry meaning within the format. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
-rw-r--r--Documentation/git-fast-import.txt655
1 files changed, 655 insertions, 0 deletions
diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt
new file mode 100644
index 000000000..16308731f
--- /dev/null
+++ b/Documentation/git-fast-import.txt
@@ -0,0 +1,655 @@
+git-fast-import(1)
+==================
+
+NAME
+----
+git-fast-import - Backend for fast Git data importers.
+
+
+SYNOPSIS
+--------
+frontend | 'git-fast-import' [options]
+
+DESCRIPTION
+-----------
+This program is usually not what the end user wants to run directly.
+Most end users want to use one of the existing frontend programs,
+which parses a specific type of foreign source and feeds the contents
+stored there to git-fast-import (gfi).
+
+gfi reads a mixed command/data stream from standard input and
+writes one or more packfiles directly into the current repository.
+When EOF is received on standard input, fast import writes out
+updated branch and tag refs, fully updating the current repository
+with the newly imported data.
+
+The gfi backend itself can import into an empty repository (one that
+has already been initialized by gitlink:git-init[1]) or incrementally
+update an existing populated repository. Whether or not incremental
+imports are supported from a particular foreign source depends on
+the frontend program in use.
+
+
+OPTIONS
+-------
+--max-pack-size=<n>::
+ Maximum size of each output packfile, expressed in MiB.
+ The default is 4096 (4 GiB) as that is the maximum allowed
+ packfile size (due to file format limitations). Some
+ importers may wish to lower this, such as to ensure the
+ resulting packfiles fit on CDs.
+
+--depth=<n>::
+ Maximum delta depth, for blob and tree deltification.
+ Default is 10.
+
+--active-branches=<n>::
+ Maximum number of branches to maintain active at once.
+ See ``Memory Utilization'' below for details. Default is 5.
+
+--export-marks=<file>::
+ Dumps the internal marks table to <file> when complete.
+ Marks are written one per line as `:markid SHA-1`.
+ Frontends can use this file to validate imports after they
+ have been completed.
+
+--branch-log=<file>::
+ Records every tag and commit made to a log file. (This file
+ can be quite verbose on large imports.) This particular
+ option has been primarily intended to facilitate debugging
+ gfi and has limited usefulness in other contexts. It may
+ be removed in future versions.
+
+
+Performance
+-----------
+The design of gfi allows it to import large projects in a minimum
+amount of memory usage and processing time. Assuming the frontend
+is able to keep up with gfi and feed it a constant stream of data,
+import times for projects holding 10+ years of history and containing
+100,000+ individual commits are generally completed in just 1-2
+hours on quite modest (~$2,000 USD) hardware.
+
+Most bottlenecks appear to be in foreign source data access (the
+source just cannot extract revisions fast enough) or disk IO (gfi
+writes as fast as the disk will take the data). Imports will run
+faster if the source data is stored on a different drive than the
+destination Git repository (due to less IO contention).
+
+
+Development Cost
+----------------
+A typical frontend for gfi tends to weigh in at approximately 200
+lines of Perl/Python/Ruby code. Most developers have been able to
+create working importers in just a couple of hours, even though it
+is their first exposure to gfi, and sometimes even to Git. This is
+an ideal situation, given that most conversion tools are throw-away
+(use once, and never look back).
+
+
+Parallel Operation
+------------------
+Like `git-push` or `git-fetch`, imports handled by gfi are safe to
+run alongside parallel `git repack -a -d` or `git gc` invocations,
+or any other Git operation (including `git prune`, as loose objects
+are never used by gfi).
+
+However, gfi does not lock the branch or tag refs it is actively
+importing. After EOF, during its ref update phase, gfi blindly
+overwrites each imported branch or tag ref. Consequently it is not
+safe to modify refs that are currently being used by a running gfi
+instance, as work could be lost when gfi overwrites the refs.
+
+
+Technical Discussion
+--------------------
+gfi tracks a set of branches in memory. Any branch can be created
+or modified at any point during the import process by sending a
+`commit` command on the input stream. This design allows a frontend
+program to process an unlimited number of branches simultaneously,
+generating commits in the order they are available from the source
+data. It also simplifies the frontend programs considerably.
+
+gfi does not use or alter the current working directory, or any
+file within it. (It does however update the current Git repository,
+as referenced by `GIT_DIR`.) Therefore an import frontend may use
+the working directory for its own purposes, such as extracting file
+revisions from the foreign source. This ignorance of the working
+directory also allows gfi to run very quickly, as it does not
+need to perform any costly file update operations when switching
+between branches.
+
+Input Format
+------------
+With the exception of raw file data (which Git does not interpret)
+the gfi input format is text (ASCII) based. This text based
+format simplifies development and debugging of frontend programs,
+especially when a higher level language such as Perl, Python or
+Ruby is being used.
+
+gfi is very strict about its input. Where we say SP below we mean
+*exactly* one space. Likewise LF means one (and only one) linefeed.
+Supplying additional whitespace characters will cause unexpected
+results, such as branch names or file names with leading or trailing
+spaces in their name, or early termination of gfi when it encounters
+unexpected input.
+
+Commands
+~~~~~~~~
+gfi accepts several commands to update the current repository
+and control the current import process. More detailed discussion
+(with examples) of each command follows later.
+
+`commit`::
+ Creates a new branch or updates an existing branch by
+ creating a new commit and updating the branch to point at
+ the newly created commit.
+
+`tag`::
+ Creates an annotated tag object from an existing commit or
+ branch. Lightweight tags are not supported by this command,
+ as they are not recommended for recording meaningful points
+ in time.
+
+`reset`::
+ Reset an existing branch (or a new branch) to a specific
+ revision. This command must be used to change a branch to
+ a specific revision without making a commit on it.
+
+`blob`::
+ Convert raw file data into a blob, for future use in a
+ `commit` command. This command is optional and is not
+ needed to perform an import.
+
+`checkpoint`::
+ Forces gfi to close the current packfile, generate its
+ unique SHA-1 checksum and index, and start a new packfile.
+ This command is optional and is not needed to perform
+ an import.
+
+`commit`
+~~~~~~~~
+Create or update a branch with a new commit, recording one logical
+change to the project.
+
+....
+ 'commit' SP <ref> LF
+ mark?
+ ('author' SP <name> SP LT <email> GT SP <time> SP <tz> LF)?
+ 'committer' SP <name> SP LT <email> GT SP <time> SP <tz> LF
+ data
+ ('from' SP <committish> LF)?
+ ('merge' SP <committish> LF)?
+ (filemodify | filedelete)*
+ LF
+....
+
+where `<ref>` is the name of the branch to make the commit on.
+Typically branch names are prefixed with `refs/heads/` in
+Git, so importing the CVS branch symbol `RELENG-1_0` would use
+`refs/heads/RELENG-1_0` for the value of `<ref>`. The value of
+`<ref>` must be a valid refname in Git. As `LF` is not valid in
+a Git refname, no quoting or escaping syntax is supported here.
+
+A `mark` command may optionally appear, requesting gfi to save a
+reference to the newly created commit for future use by the frontend
+(see below for format). It is very common for frontends to mark
+every commit they create, thereby allowing future branch creation
+from any imported commit.
+
+The `data` command following `committer` must supply the commit
+message (see below for `data` command syntax). To import an empty
+commit message use a 0 length data. Commit messages are free-form
+and are not interpreted by Git. Currently they must be encoded in
+UTF-8, as gfi does not permit other encodings to be specified.
+
+Zero or more `filemodify` and `filedelete` commands may be
+included to update the contents of the branch prior to the commit.
+These commands can be supplied in any order, gfi is not sensitive
+to pathname or operation ordering.
+
+`author`
+^^^^^^^^
+An `author` command may optionally appear, if the author information
+might differ from the committer information. If `author` is omitted
+then gfi will automatically use the committer's information for
+the author portion of the commit. See below for a description of
+the fields in `author`, as they are identical to `committer`.
+
+`committer`
+^^^^^^^^^^^
+The `committer` command indicates who made this commit, and when
+they made it.
+
+Here `<name>` is the person's display name (for example
+``Com M Itter'') and `<email>` is the person's email address
+(``cm@example.com''). `LT` and `GT` are the literal less-than (\x3c)
+and greater-than (\x3e) symbols. These are required to delimit
+the email address from the other fields in the line. Note that
+`<name>` is free-form and may contain any sequence of bytes, except
+`LT` and `LF`. It is typically UTF-8 encoded.
+
+The time of the change is specified by `<time>` as the number of
+seconds since the UNIX epoc (midnight, Jan 1, 1970, UTC) and is
+written in base-10 notation using US-ASCII digits. The committer's
+timezone is specified by `<tz>` as a positive or negative offset
+from UTC, in minutes. For example EST would be expressed in `<tz>`
+by ``-0500''.
+
+`from`
+^^^^^^
+Only valid for the first commit made on this branch by this
+gfi process. The `from` command is used to specify the commit
+to initialize this branch from. This revision will be the first
+ancestor of the new commit.
+
+Omitting the `from` command in the first commit of a new branch will
+cause gfi to create that commit with no ancestor. This tends to be
+desired only for the initial commit of a project. Omitting the
+`from` command on existing branches is required, as the current
+commit on that branch is automatically assumed to be the first
+ancestor of the new commit.
+
+As `LF` is not valid in a Git refname or SHA-1 expression, no
+quoting or escaping syntax is supported within `<committish>`.
+
+Here `<committish>` is any of the following:
+
+* The name of an existing branch already in gfi's internal branch
+ table. If gfi doesn't know the name, its treated as a SHA-1
+ expression.
+
+* A mark reference, `:<idnum>`, where `<idnum>` is the mark number.
++
+The reason gfi uses `:` to denote a mark reference is this character
+is not legal in a Git branch name. The leading `:` makes it easy
+to distingush between the mark 42 (`:42`) and the branch 42 (`42`
+or `refs/heads/42`), or an abbreviated SHA-1 which happened to
+consist only of base-10 digits.
++
+Marks must be declared (via `mark`) before they can be used.
+
+* A complete 40 byte or abbreviated commit SHA-1 in hex.
+
+* Any valid Git SHA-1 expression that resolves to a commit. See
+ ``SPECIFYING REVISIONS'' in gitlink:git-rev-parse[1] for details.
+
+The special case of restarting an incremental import from the
+current branch value should be written as:
+----
+ from refs/heads/branch^0
+----
+The `^0` suffix is necessary as gfi does not permit a branch to
+start from itself, and the branch is created in memory before the
+`from` command is even read from the input. Adding `^0` will force
+gfi to resolve the commit through Git's revision parsing library,
+rather than its internal branch table, thereby loading in the
+existing value of the branch.
+
+`merge`
+^^^^^^^
+Includes one additional ancestor commit, and makes the current
+commit a merge commit. An unlimited number of `merge` commands per
+commit are permitted by gfi, thereby establishing an n-way merge.
+However Git's other tools never create commits with more than 15
+additional ancestors (forming a 16-way merge). For this reason
+it is suggested that frontends do not use more than 15 `merge`
+commands per commit.
+
+Here `<committish>` is any of the commit specification expressions
+also accepted by `from` (see above).
+
+`filemodify`
+^^^^^^^^^^
+Included in a `commit` command to add a new file or change the
+content of an existing file. This command has two different means
+of specifying the content of the file.
+
+External data format::
+ The data content for the file was already supplied by a prior
+ `blob` command. The frontend just needs to connect it.
++
+....
+ 'M' SP <mode> SP <dataref> SP <path> LF
+....
++
+Here `<dataref>` can be either a mark reference (`:<idnum>`)
+set by a prior `blob` command, or a full 40-byte SHA-1 of an
+existing Git blob object.
+
+Inline data format::
+ The data content for the file has not been supplied yet.
+ The frontend wants to supply it as part of this modify
+ command.
++
+....
+ 'M' SP <mode> SP 'inline' SP <path> LF
+ data
+....
++
+See below for a detailed description of the `data` command.
+
+In both formats `<mode>` is the type of file entry, specified
+in octal. Git only supports the following modes:
+
+* `100644` or `644`: A normal (not-executable) file. The majority
+ of files in most projects use this mode. If in doubt, this is
+ what you want.
+* `100755` or `755`: A normal, but executable, file.
+* `140000`: A symlink, the content of the file will be the link target.
+
+In both formats `<path>` is the complete path of the file to be added
+(if not already existing) or modified (if already existing).
+
+A `<path>` string must use UNIX-style directory seperators (forward
+slash `/`), may contain any byte other than `LF`, and must not
+start with double quote (`"`).
+
+If an `LF` or double quote must be encoded into `<path>` shell-style
+quoting should be used, e.g. `"path/with\n and \" in it"`.
+
+The value of `<path>` must be in canoncial form. That is it must not:
+
+* contain an empty directory component (e.g. `foo//bar` is invalid),
+* end with a directory seperator (e.g. `foo/` is invalid),
+* start with a directory seperator (e.g. `/foo` is invalid),
+* contain the special component `.` or `..` (e.g. `foo/./bar` and
+ `foo/../bar` are invalid).
+
+It is recommended that `<path>` always be encoded using UTF-8.
+
+
+`filedelete`
+^^^^^^^^^^
+Included in a `commit` command to remove a file from the branch.
+If the file removal makes its directory empty, the directory will
+be automatically removed too. This cascades up the tree until the
+first non-empty directory or the root is reached.
+
+....
+ 'D' SP <path> LF
+....
+
+here `<path>` is the complete path of the file to be removed.
+See `filemodify` above for a detailed description of `<path>`.
+
+`mark`
+~~~~~~
+Arranges for gfi to save a reference to the current object, allowing
+the frontend to recall this object at a future point in time, without
+knowing its SHA-1. Here the current object is the object creation
+command the `mark` command appears within. This can be `commit`,
+`tag`, and `blob`, but `commit` is the most common usage.
+
+....
+ 'mark' SP ':' <idnum> LF
+....
+
+where `<idnum>` is the number assigned by the frontend to this mark.
+The value of `<idnum>` is expressed in base 10 notation using
+US-ASCII digits. The value 0 is reserved and cannot be used as
+a mark. Only values greater than or equal to 1 may be used as marks.
+
+New marks are created automatically. Existing marks can be moved
+to another object simply by reusing the same `<idnum>` in another
+`mark` command.
+
+`tag`
+~~~~~
+Creates an annotated tag referring to a specific commit. To create
+lightweight (non-annotated) tags see the `reset` command below.
+
+....
+ 'tag' SP <name> LF
+ 'from' SP <committish> LF
+ 'tagger' SP <name> SP LT <email> GT SP <time> SP <tz> LF
+ data
+ LF
+....
+
+where `<name>` is the name of the tag to create.
+
+Tag names are automatically prefixed with `refs/tags/` when stored
+in Git, so importing the CVS branch symbol `RELENG-1_0-FINAL` would
+use just `RELENG-1_0-FINAL` for `<name>`, and gfi will write the
+corresponding ref as `refs/tags/RELENG-1_0-FINAL`.
+
+The value of `<name>` must be a valid refname in Git and therefore
+may contain forward slashes. As `LF` is not valid in a Git refname,
+no quoting or escaping syntax is supported here.
+
+The `from` command is the same as in the `commit` command; see
+above for details.
+
+The `tagger` command uses the same format as `committer` within
+`commit`; again see above for details.
+
+The `data` command following `tagger` must supply the annotated tag
+message (see below for `data` command syntax). To import an empty
+tag message use a 0 length data. Tag messages are free-form and are
+not interpreted by Git. Currently they must be encoded in UTF-8,
+as gfi does not permit other encodings to be specified.
+
+Signing annotated tags during import from within gfi is not
+supported. Trying to include your own PGP/GPG signature is not
+recommended, as the frontend does not (easily) have access to the
+complete set of bytes which normally goes into such a signature.
+If signing is required, create lightweight tags from within gfi with
+`reset`, then create the annotated versions of those tags offline
+with the standard gitlink:git-tag[1] process.
+
+`reset`
+~~~~~~~
+Creates (or recreates) the named branch, optionally starting from
+a specific revision. The reset command allows a frontend to issue
+a new `from` command for an existing branch, or to create a new
+branch from an existing commit without creating a new commit.
+
+....
+ 'reset' SP <ref> LF
+ ('from' SP <committish> LF)?
+ LF
+....
+
+For a detailed description of `<ref>` and `<committish>` see above
+under `commit` and `from`.
+
+The `reset` command can also be used to create lightweight
+(non-annotated) tags. For example:
+
+====
+ reset refs/tags/938
+ from :938
+====
+
+would create the lightweight tag `refs/tags/938` referring to
+whatever commit mark `:938` references.
+
+`blob`
+~~~~~~
+Requests writing one file revision to the packfile. The revision
+is not connected to any commit; this connection must be formed in
+a subsequent `commit` command by referencing the blob through an
+assigned mark.
+
+....
+ 'blob' LF
+ mark?
+ data
+....
+
+The mark command is optional here as some frontends have chosen
+to generate the Git SHA-1 for the blob on their own, and feed that
+directly to `commit`. This is typically more work than its worth
+however, as marks are inexpensive to store and easy to use.
+
+`data`
+~~~~~~
+Supplies raw data (for use as blob/file content, commit messages, or
+annotated tag messages) to gfi. Data can be supplied using an exact
+byte count or delimited with a terminating line. Real frontends
+intended for production-quality conversions should always use the
+exact byte count format, as it is more robust and performs better.
+The delimited format is intended primarily for testing gfi.
+
+Exact byte count format:
+
+....
+ 'data' SP <count> LF
+ <raw> LF
+....
+
+where `<count>` is the exact number of bytes appearing within
+`<raw>`. The value of `<count>` is expressed in base 10 notation
+using US-ASCII digits. The `LF` on either side of `<raw>` is not
+included in `<count>` and will not be included in the imported data.
+
+Delimited format:
+
+....
+ 'data' SP '<<' <delim> LF
+ <raw> LF
+ <delim> LF
+....
+
+where `<delim>` is the chosen delimiter string. The string `<delim>`
+must not appear on a line by itself within `<raw>`, as otherwise
+gfi will think the data ends earlier than it really does. The `LF`
+immediately trailing `<raw>` is part of `<raw>`. This is one of
+the limitations of the delimited format, it is impossible to supply
+a data chunk which does not have an LF as its last byte.
+
+`checkpoint`
+~~~~~~~~~~~~
+Forces gfi to close the current packfile and start a new one.
+As this requires a significant amount of CPU time and disk IO
+(to compute the overall pack SHA-1 checksum and generate the
+corresponding index file) it can easily take several minutes for
+a single `checkpoint` command to complete.
+
+....
+ 'checkpoint' LF
+ LF
+....
+
+Packfile Optimization
+---------------------
+When packing a blob gfi always attempts to deltify against the last
+blob written. Unless specifically arranged for by the frontend,
+this will probably not be a prior version of the same file, so the
+generated delta will not be the smallest possible. The resulting
+packfile will be compressed, but will not be optimal.
+
+Frontends which have efficient access to all revisions of a
+single file (for example reading an RCS/CVS ,v file) can choose
+to supply all revisions of that file as a sequence of consecutive
+`blob` commands. This allows gfi to deltify the different file
+revisions against each other, saving space in the final packfile.
+Marks can be used to later identify individual file revisions during
+a sequence of `commit` commands.
+
+The packfile(s) created by gfi do not encourage good disk access
+patterns. This is caused by gfi writing the data in the order
+it is received on standard input, while Git typically organizes
+data within packfiles to make the most recent (current tip) data
+appear before historical data. Git also clusters commits together,
+speeding up revision traversal through better cache locality.
+
+For this reason it is strongly recommended that users repack the
+repository with `git repack -a -d` after gfi completes, allowing
+Git to reorganize the packfiles for faster data access. If blob
+deltas are suboptimal (see above) then also adding the `-f` option
+to force recomputation of all deltas can significantly reduce the
+final packfile size (30-50% smaller can be quite typical).
+
+Memory Utilization
+------------------
+There are a number of factors which affect how much memory gfi
+requires to perform an import. Like critical sections of core
+Git, gfi uses its own memory allocators to ammortize any overheads
+associated with malloc. In practice gfi tends to ammoritize any
+malloc overheads to 0, due to its use of large block allocations.
+
+per object
+~~~~~~~~~~
+gfi maintains an in-memory structure for every object written in
+this execution. On a 32 bit system the structure is 32 bytes,
+on a 64 bit system the structure is 40 bytes (due to the larger
+pointer sizes). Objects in the table are not deallocated until
+gfi terminates. Importing 2 million objects on a 32 bit system
+will require approximately 64 MiB of memory.
+
+The object table is actually a hashtable keyed on the object name
+(the unique SHA-1). This storage configuration allows gfi to reuse
+an existing or already written object and avoid writing duplicates
+to the output packfile. Duplicate blobs are surprisingly common
+in an import, typically due to branch merges in the source.
+
+per mark
+~~~~~~~~
+Marks are stored in a sparse array, using 1 pointer (4 bytes or 8
+bytes, depending on pointer size) per mark. Although the array
+is sparse, frontends are still strongly encouraged to use marks
+between 1 and n, where n is the total number of marks required for
+this import.
+
+per branch
+~~~~~~~~~~
+Branches are classified as active and inactive. The memory usage
+of the two classes is significantly different.
+
+Inactive branches are stored in a structure which uses 96 or 120
+bytes (32 bit or 64 bit systems, respectively), plus the length of
+the branch name (typically under 200 bytes), per branch. gfi will
+easily handle as many as 10,000 inactive branches in under 2 MiB
+of memory.
+
+Active branches have the same overhead as inactive branches, but
+also contain copies of every tree that has been recently modified on
+that branch. If subtree `include` has not been modified since the
+branch became active, its contents will not be loaded into memory,
+but if subtree `src` has been modified by a commit since the branch
+became active, then its contents will be loaded in memory.
+
+As active branches store metadata about the files contained on that
+branch, their in-memory storage size can grow to a considerable size
+(see below).
+
+gfi automatically moves active branches to inactive status based on
+a simple least-recently-used algorithm. The LRU chain is updated on
+each `commit` command. The maximum number of active branches can be
+increased or decreased on the command line with `--active-branches=`.
+
+per active tree
+~~~~~~~~~~~~~~~
+Trees (aka directories) use just 12 bytes of memory on top of the
+memory required for their entries (see ``per active file'' below).
+The cost of a tree is virtually 0, as its overhead ammortizes out
+over the individual file entries.
+
+per active file entry
+~~~~~~~~~~~~~~~~~~~~~
+Files (and pointers to subtrees) within active trees require 52 or 64
+bytes (32/64 bit platforms) per entry. To conserve space, file and
+tree names are pooled in a common string table, allowing the filename
+``Makefile'' to use just 16 bytes (after including the string header
+overhead) no matter how many times it occurs within the project.
+
+The active branch LRU, when coupled with the filename string pool
+and lazy loading of subtrees, allows gfi to efficiently import
+projects with 2,000+ branches and 45,114+ files in a very limited
+memory footprint (less than 2.7 MiB per active branch).
+
+
+Author
+------
+Written by Shawn O. Pearce <spearce@spearce.org>.
+
+Documentation
+--------------
+Documentation by Shawn O. Pearce <spearce@spearce.org>.
+
+GIT
+---
+Part of the gitlink:git[7] suite
+