Merge branch 'master' into jc/bisect

This is to merge in the fix for path-limited bisection
from the 'master' branch.

15 files changed, 274 insertions, 68 deletions

diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt
index 4fb1d8441..13a738986 100644
--- a/Documentation/git-am.txt
+++ b/Documentation/git-am.txt
@@ -70,7 +70,7 @@ default.   You could use `--no-utf8` to override this.
 	the patch.
 
 -C<n>, -p<n>::
-	These flag are passed to the `git-apply` program that applies
+	These flags are passed to the `git-apply` program that applies
 	the patch.
 
 --interactive::
diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt
index 16ec7269b..b2bc58d85 100644
--- a/Documentation/git-bisect.txt
+++ b/Documentation/git-bisect.txt
@@ -12,8 +12,8 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-The command takes various subcommands, and different options
-depending on the subcommand:
+The command takes various subcommands, and different options depending
+on the subcommand:
 
  git bisect start [<paths>...]
  git bisect bad <rev>
@@ -22,30 +22,34 @@ depending on the subcommand:
  git bisect visualize
  git bisect replay <logfile>
  git bisect log
+ git bisect run <cmd>...
 
-This command uses 'git-rev-list --bisect' option to help drive
-the binary search process to find which change introduced a bug,
-given an old "good" commit object name and a later "bad" commit
-object name.
+This command uses 'git-rev-list --bisect' option to help drive the
+binary search process to find which change introduced a bug, given an
+old "good" commit object name and a later "bad" commit object name.
+
+Basic bisect commands: start, bad, good
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The way you use it is:
 
 ------------------------------------------------
 $ git bisect start
-$ git bisect bad			# Current version is bad
-$ git bisect good v2.6.13-rc2		# v2.6.13-rc2 was the last version
-					# tested that was good
+$ git bisect bad                 # Current version is bad
+$ git bisect good v2.6.13-rc2    # v2.6.13-rc2 was the last version
+                                 # tested that was good
 ------------------------------------------------
 
-When you give at least one bad and one good versions, it will
-bisect the revision tree and say something like:
+When you give at least one bad and one good versions, it will bisect
+the revision tree and say something like:
 
 ------------------------------------------------
 Bisecting: 675 revisions left to test after this
 ------------------------------------------------
 
-and check out the state in the middle. Now, compile that kernel, and boot
-it. Now, let's say that this booted kernel works fine, then just do
+and check out the state in the middle. Now, compile that kernel, and
+boot it. Now, let's say that this booted kernel works fine, then just
+do
 
 ------------------------------------------------
 $ git bisect good			# this one is good
@@ -57,12 +61,15 @@ which will now say
 Bisecting: 337 revisions left to test after this
 ------------------------------------------------
 
-and you continue along, compiling that one, testing it, and depending on
-whether it is good or bad, you say "git bisect good" or "git bisect bad",
-and ask for the next bisection.
+and you continue along, compiling that one, testing it, and depending
+on whether it is good or bad, you say "git bisect good" or "git bisect
+bad", and ask for the next bisection.
+
+Until you have no more left, and you'll have been left with the first
+bad kernel rev in "refs/bisect/bad".
 
-Until you have no more left, and you'll have been left with the first bad
-kernel rev in "refs/bisect/bad".
+Bisect reset
+~~~~~~~~~~~~
 
 Oh, and then after you want to reset to the original head, do a
 
@@ -70,10 +77,13 @@ Oh, and then after you want to reset to the original head, do a
 $ git bisect reset
 ------------------------------------------------
 
-to get back to the master branch, instead of being in one of the bisection
-branches ("git bisect start" will do that for you too, actually: it will
-reset the bisection state, and before it does that it checks that you're
-not using some old bisection branch).
+to get back to the master branch, instead of being in one of the
+bisection branches ("git bisect start" will do that for you too,
+actually: it will reset the bisection state, and before it does that
+it checks that you're not using some old bisection branch).
+
+Bisect visualize
+~~~~~~~~~~~~~~~~
 
 During the bisection process, you can say
 
@@ -83,9 +93,17 @@ $ git bisect visualize
 
 to see the currently remaining suspects in `gitk`.
 
-The good/bad input is logged, and `git bisect
-log` shows what you have done so far.  You can truncate its
-output somewhere and save it in a file, and run
+Bisect log and bisect replay
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The good/bad input is logged, and
+
+------------
+$ git bisect log
+------------
+
+shows what you have done so far. You can truncate its output somewhere
+and save it in a file, and run
 
 ------------
 $ git bisect replay that-file
@@ -94,12 +112,16 @@ $ git bisect replay that-file
 if you find later you made a mistake telling good/bad about a
 revision.
 
-If in a middle of bisect session, you know what the bisect
-suggested to try next is not a good one to test (e.g. the change
-the commit introduces is known not to work in your environment
-and you know it does not have anything to do with the bug you
-are chasing), you may want to find a near-by commit and try that
-instead.  It goes something like this:
+Avoiding to test a commit
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If in a middle of bisect session, you know what the bisect suggested
+to try next is not a good one to test (e.g. the change the commit
+introduces is known not to work in your environment and you know it
+does not have anything to do with the bug you are chasing), you may
+want to find a near-by commit and try that instead.
+
+It goes something like this:
 
 ------------
 $ git bisect good/bad			# previous round was good/bad.
@@ -109,18 +131,52 @@ $ git reset --hard HEAD~3		# try 3 revs before what
 					# was suggested
 ------------
 
-Then compile and test the one you chose to try.  After that,
-tell bisect what the result was as usual.
+Then compile and test the one you chose to try. After that, tell
+bisect what the result was as usual.
 
-You can further cut down the number of trials if you know what
-part of the tree is involved in the problem you are tracking
-down, by giving paths parameters when you say `bisect start`,
-like this:
+Cutting down bisection by giving path parameter to bisect start
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+You can further cut down the number of trials if you know what part of
+the tree is involved in the problem you are tracking down, by giving
+paths parameters when you say `bisect start`, like this:
 
 ------------
 $ git bisect start arch/i386 include/asm-i386
 ------------
 
+Bisect run
+~~~~~~~~~~
+
+If you have a script that can tell if the current source code is good
+or bad, you can automatically bisect using:
+
+------------
+$ git bisect run my_script
+------------
+
+Note that the "run" script (`my_script` in the above example) should
+exit with code 0 in case the current source code is good and with a
+code between 1 and 127 (included) in case the current source code is
+bad.
+
+Any other exit code will abort the automatic bisect process. (A
+program that does "exit(-1)" leaves $? = 255, see exit(3) manual page,
+the value is chopped with "& 0377".)
+
+You may often find that during bisect you want to have near-constant
+tweaks (e.g., s/#define DEBUG 0/#define DEBUG 1/ in a header file, or
+"revision that does not have this commit needs this patch applied to
+work around other problem this bisection is not interested in")
+applied to the revision being tested.
+
+To cope with such a situation, after the inner git-bisect finds the
+next revision to test, with the "run" script, you can apply that tweak
+before compiling, run the real test, and after the test decides if the
+revision (possibly with the needed tweaks) passed the test, rewind the
+tree to the pristine state.  Finally the "run" script can exit with
+the status of the real test to let "git bisect run" command loop to
+know the outcome.
 
 Author
 ------
diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt
index 0e1ffb242..9ce3c473a 100644
--- a/Documentation/technical/pack-format.txt
+++ b/Documentation/technical/pack-format.txt
@@ -21,11 +21,11 @@ GIT pack format
      which looks like this:
 
      (undeltified representation)
-     n-byte type and length (4-bit type, (n-1)*7+4-bit length)
+     n-byte type and length (3-bit type, (n-1)*7+4-bit length)
      compressed data
 
      (deltified representation)
-     n-byte type and length (4-bit type, (n-1)*7+4-bit length)
+     n-byte type and length (3-bit type, (n-1)*7+4-bit length)
      20-byte base object name
      compressed delta data
 
@@ -102,11 +102,13 @@ trailer	  | | packfile checksum              |
 Pack file entry: <+
 
      packed object header:
-	1-byte type (upper 4-bit)
+	1-byte size extension bit (MSB)
+	       type (next 3 bit)
 	       size0 (lower 4-bit) 
         n-byte sizeN (as long as MSB is set, each 7-bit)
 		size0..sizeN form 4+7+7+..+7 bit integer, size0
-		is the most significant part.
+		is the least significant part, and sizeN is the
+		most significant part.
      packed object data:
         If it is not DELTA, then deflated bytes (the size above
 		is the size before compression).
diff --git a/builtin-apply.c b/builtin-apply.c
index dfa171679..27a182bfa 100644
--- a/builtin-apply.c
+++ b/builtin-apply.c
@@ -2355,7 +2355,7 @@ static void add_index_file(const char *path, unsigned mode, void *buf, unsigned
 
 static int try_create_file(const char *path, unsigned int mode, const char *buf, unsigned long size)
 {
-	int fd;
+	int fd, converted;
 	char *nbuf;
 	unsigned long nsize;
 
@@ -2364,17 +2364,18 @@ static int try_create_file(const char *path, unsigned int mode, const char *buf,
 		 * terminated.
 		 */
 		return symlink(buf, path);
+
+	fd = open(path, O_CREAT | O_EXCL | O_WRONLY, (mode & 0100) ? 0777 : 0666);
+	if (fd < 0)
+		return -1;
+
 	nsize = size;
 	nbuf = (char *) buf;
-	if (convert_to_working_tree(path, &nbuf, &nsize)) {
-		free((char *) buf);
+	converted = convert_to_working_tree(path, &nbuf, &nsize);
+	if (converted) {
 		buf = nbuf;
 		size = nsize;
 	}
-
-	fd = open(path, O_CREAT | O_EXCL | O_WRONLY, (mode & 0100) ? 0777 : 0666);
-	if (fd < 0)
-		return -1;
 	while (size) {
 		int written = xwrite(fd, buf, size);
 		if (written < 0)
@@ -2386,6 +2387,8 @@ static int try_create_file(const char *path, unsigned int mode, const char *buf,
 	}
 	if (close(fd) < 0)
 		die("closing file %s: %s", path, strerror(errno));
+	if (converted)
+		free(nbuf);
 	return 0;
 }
 
diff --git a/builtin-rev-list.c b/builtin-rev-list.c
index b395ffeb0..09e3a60bf 100644
--- a/builtin-rev-list.c
+++ b/builtin-rev-list.c
@@ -182,9 +182,9 @@ static struct commit_list *find_bisection(struct commit_list *list,
 			nr++;
 		p = p->next;
 	}
-	*all = nr;
-	closest = 0;
+	closest = -1;
 	best = list;
+	*all = nr;
 
 	for (p = list; p; p = p->next) {
 		int distance, reach;
diff --git a/git-bisect.sh b/git-bisect.sh
index b1c3a6b1c..936b4a4b8 100755
--- a/git-bisect.sh
+++ b/git-bisect.sh
@@ -1,14 +1,15 @@
 #!/bin/sh
 
-USAGE='[start|bad|good|next|reset|visualize|replay|log]'
+USAGE='[start|bad|good|next|reset|visualize|replay|log|run]'
 LONG_USAGE='git bisect start [<pathspec>]	reset bisect state and start bisection.
 git bisect bad [<rev>]		mark <rev> a known-bad revision.
 git bisect good [<rev>...]	mark <rev>... known-good revisions.
 git bisect next			find next bisection to test and check it out.
 git bisect reset [<branch>]	finish bisection search and go back to branch.
 git bisect visualize            show bisect status in gitk.
-git bisect replay <logfile>	replay bisection log
-git bisect log			show bisect log.'
+git bisect replay <logfile>	replay bisection log.
+git bisect log			show bisect log.
+git bisect run <cmd>... 	use <cmd>... to automatically bisect.'
 
 . git-sh-setup
 require_work_tree
@@ -49,7 +50,7 @@ bisect_start() {
 	head=$(GIT_DIR="$GIT_DIR" git-symbolic-ref HEAD) ||
 	die "Bad HEAD - I need a symbolic ref"
 	case "$head" in
-	refs/heads/bisect*)
+	refs/heads/bisect)
 		if [ -s "$GIT_DIR/head-name" ]; then
 		    branch=`cat "$GIT_DIR/head-name"`
 		else
@@ -85,7 +86,7 @@ bisect_bad() {
 	0)
 		rev=$(git-rev-parse --verify HEAD) ;;
 	1)
-		rev=$(git-rev-parse --verify "$1") ;;
+		rev=$(git-rev-parse --verify "$1^{commit}") ;;
 	*)
 		usage ;;
 	esac || exit
@@ -104,7 +105,7 @@ bisect_good() {
 	esac
 	for rev in $revs
 	do
-		rev=$(git-rev-parse --verify "$rev") || exit
+		rev=$(git-rev-parse --verify "$rev^{commit}") || exit
 		echo "$rev" >"$GIT_DIR/refs/bisect/good-$rev"
 		echo "# good: "$(git-show-branch $rev) >>"$GIT_DIR/BISECT_LOG"
 		echo "git-bisect good $rev" >>"$GIT_DIR/BISECT_LOG"
@@ -140,7 +141,7 @@ bisect_next() {
 	bad=$(git-rev-parse --verify refs/bisect/bad) &&
 	good=$(git-rev-parse --sq --revs-only --not \
 		$(cd "$GIT_DIR" && ls refs/bisect/good-*)) &&
-	rev=$(eval "git-rev-list --bisect $good $bad -- $(cat $GIT_DIR/BISECT_NAMES)") || exit
+	rev=$(eval "git-rev-list --bisect $good $bad -- $(cat "$GIT_DIR/BISECT_NAMES")") || exit
 	if [ -z "$rev" ]; then
 	    echo "$bad was both good and bad"
 	    exit 1
@@ -185,6 +186,7 @@ bisect_reset() {
 		rm -f "$GIT_DIR/refs/heads/bisect" "$GIT_DIR/head-name"
 		rm -f "$GIT_DIR/BISECT_LOG"
 		rm -f "$GIT_DIR/BISECT_NAMES"
+		rm -f "$GIT_DIR/BISECT_RUN"
 	fi
 }
 
@@ -220,6 +222,50 @@ bisect_replay () {
 	bisect_auto_next
 }
 
+bisect_run () {
+    while true
+    do
+      echo "running $@"
+      "$@"
+      res=$?
+
+      # Check for really bad run error.
+      if [ $res -lt 0 -o $res -ge 128 ]; then
+	  echo >&2 "bisect run failed:"
+	  echo >&2 "exit code $res from '$@' is < 0 or >= 128"
+	  exit $res
+      fi
+
+      # Use "bisect_good" or "bisect_bad"
+      # depending on run success or failure.
+      if [ $res -gt 0 ]; then
+	  next_bisect='bisect_bad'
+      else
+	  next_bisect='bisect_good'
+      fi
+
+      # We have to use a subshell because bisect_good or
+      # bisect_bad functions can exit.
+      ( $next_bisect > "$GIT_DIR/BISECT_RUN" )
+      res=$?
+
+      cat "$GIT_DIR/BISECT_RUN"
+
+      if [ $res -ne 0 ]; then
+	  echo >&2 "bisect run failed:"
+	  echo >&2 "$next_bisect exited with error code $res"
+	  exit $res
+      fi
+
+      if grep "is first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
+	  echo "bisect run success"
+	  exit 0;
+      fi
+
+    done
+}
+
+
 case "$#" in
 0)
     usage ;;
@@ -244,6 +290,8 @@ case "$#" in
 	bisect_replay "$@" ;;
     log)
 	cat "$GIT_DIR/BISECT_LOG" ;;
+    run)
+        bisect_run "$@" ;;
     *)
         usage ;;
     esac
diff --git a/git-checkout.sh b/git-checkout.sh
index 3c9b1bb05..a7390e808 100755
--- a/git-checkout.sh
+++ b/git-checkout.sh
@@ -163,6 +163,13 @@ cd_to_toplevel
 detached=
 detach_warn=
 
+describe_detached_head () {
+	test -n "$quiet" || {
+		printf >&2 "$1 "
+		GIT_PAGER= git log >&2 -1 --pretty=oneline --abbrev-commit "$2"
+	}
+}
+
 if test -z "$branch$newbranch" && test "$new" != "$old"
 then
 	detached="$new"
@@ -173,9 +180,9 @@ If you want to create a new branch from this checkout, you may do so
 (now or later) by using -b with the checkout command again. Example:
   git checkout -b <new_branch_name>"
 	fi
-elif test -z "$oldbranch" && test -z "$quiet"
+elif test -z "$oldbranch"
 then
-	echo >&2 "Previous HEAD position was $old"
+	describe_detached_head 'Previous HEAD position was' "$old"
 fi
 
 if [ "X$old" = X ]
@@ -275,6 +282,7 @@ if [ "$?" -eq 0 ]; then
 		then
 			echo >&2 "$detach_warn"
 		fi
+		describe_detached_head 'HEAD is now at' HEAD
 	fi
 	rm -f "$GIT_DIR/MERGE_HEAD"
 else
diff --git a/git-merge.sh b/git-merge.sh
index 8759c5a7e..fa4589173 100755
--- a/git-merge.sh
+++ b/git-merge.sh
@@ -108,6 +108,10 @@ merge_name () {
 		git-show-ref -q --verify "refs/heads/$truname" 2>/dev/null
 	then
 		echo "$rh		branch '$truname' (early part) of ."
+	elif test "$remote" = "FETCH_HEAD" -a -r "$GIT_DIR/FETCH_HEAD"
+	then
+		sed -e 's/	not-for-merge	/		/' -e 1q \
+			"$GIT_DIR/FETCH_HEAD"
 	else
 		echo "$rh		commit '$remote'"
 	fi
diff --git a/git-rebase.sh b/git-rebase.sh
index b51d19d12..aadd580f8 100755
--- a/git-rebase.sh
+++ b/git-rebase.sh
@@ -265,6 +265,10 @@ upstream_name="$1"
 upstream=`git rev-parse --verify "${upstream_name}^0"` ||
     die "invalid upstream $upstream_name"
 
+# Make sure the branch to rebase onto is valid.
+onto_name=${newbase-"$upstream_name"}
+onto=$(git-rev-parse --verify "${onto_name}^0") || exit
+
 # If a hook exists, give it a chance to interrupt
 if test -x "$GIT_DIR/hooks/pre-rebase"
 then
@@ -291,10 +295,6 @@ case "$#" in
 esac
 branch=$(git-rev-parse --verify "${branch_name}^0") || exit
 
-# Make sure the branch to rebase onto is valid.
-onto_name=${newbase-"$upstream_name"}
-onto=$(git-rev-parse --verify "${onto_name}^0") || exit
-
 # Now we are rebasing commits $upstream..$branch on top of $onto
 
 # Check if we are already based on $onto, but this should be
diff --git a/gitk b/gitk
index 1cd2a8f52..db28d745d 100755
--- a/gitk
+++ b/gitk
@@ -1906,7 +1906,7 @@ proc do_file_hl {serial} {
     } else {
 	set gdtargs [list "-S$highlight_files"]
     }
-    set cmd [concat | git-diff-tree -r -s --stdin $gdtargs]
+    set cmd [concat | git diff-tree -r -s --stdin $gdtargs]
     set filehighlight [open $cmd r+]
     fconfigure $filehighlight -blocking 0
     fileevent $filehighlight readable readfhighlight
@@ -1958,7 +1958,7 @@ proc readfhighlight {} {
     }
     if {[eof $filehighlight]} {
 	# strange...
-	puts "oops, git-diff-tree died"
+	puts "oops, git diff-tree died"
 	catch {close $filehighlight}
 	unset filehighlight
     }
diff --git a/gitweb/gitweb.perl b/gitweb/gitweb.perl
index 27b5970bc..5214050a8 100755
--- a/gitweb/gitweb.perl
+++ b/gitweb/gitweb.perl
@@ -3719,7 +3719,7 @@ sub git_commit {
 		$formats_nav .=
 			'(merge: ' .
 			join(' ', map {
-				$cgi->a({-href => href(action=>"commitdiff",
+				$cgi->a({-href => href(action=>"commit",
 				                       hash=>$_)},
 				        esc_html(substr($_, 0, 7)));
 			} @$parents ) .
diff --git a/refs.c b/refs.c
index 9f1fb68d0..f471152bf 100644
--- a/refs.c
+++ b/refs.c
@@ -980,6 +980,27 @@ int write_ref_sha1(struct ref_lock *lock,
 		unlock_ref(lock);
 		return -1;
 	}
+	if (strcmp(lock->orig_ref_name, "HEAD") != 0) {
+		/*
+		 * Special hack: If a branch is updated directly and HEAD
+		 * points to it (may happen on the remote side of a push
+		 * for example) then logically the HEAD reflog should be
+		 * updated too.
+		 * A generic solution implies reverse symref information,
+		 * but finding all symrefs pointing to the given branch
+		 * would be rather costly for this rare event (the direct
+		 * update of a branch) to be worth it.  So let's cheat and
+		 * check with HEAD only which should cover 99% of all usage
+		 * scenarios (even 100% of the default ones).
+		 */
+		unsigned char head_sha1[20];
+		int head_flag;
+		const char *head_ref;
+		head_ref = resolve_ref("HEAD", head_sha1, 1, &head_flag);
+		if (head_ref && (head_flag & REF_ISSYMREF) &&
+		    !strcmp(head_ref, lock->ref_name))
+			log_ref_write("HEAD", lock->old_sha1, sha1, logmsg);
+	}
 	if (commit_lock_file(lock->lk)) {
 		error("Couldn't set %s", lock->ref_name);
 		unlock_ref(lock);
diff --git a/t/t4118-apply-empty-context.sh b/t/t4118-apply-empty-context.sh
index 690a18200..27cc6f2b8 100755
--- a/t/t4118-apply-empty-context.sh
+++ b/t/t4118-apply-empty-context.sh
@@ -23,7 +23,8 @@ test_expect_success setup '
 	cat file2 >file2.orig
 	git add file1 file2 &&
 	sed -e "/^B/d" <file1.orig >file1 &&
-	sed -e "/^B/d" <file2.orig >file2 &&
+	sed -e "/^[BQ]/d" <file2.orig >file2 &&
+	echo Q | tr -d "\\012" >>file2 &&
 	cat file1 >file1.mods &&
 	cat file2 >file2.mods &&
 	git diff |
diff --git a/t/t6030-bisect-run.sh b/t/t6030-bisect-run.sh
new file mode 100755
index 000000000..39c72283b
--- /dev/null
+++ b/t/t6030-bisect-run.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+#
+# Copyright (c) 2007 Christian Couder
+#
+test_description='Tests git-bisect run functionality'
+
+. ./test-lib.sh
+
+add_line_into_file()
+{
+    _line=$1
+    _file=$2
+
+    if [ -f "$_file" ]; then
+        echo "$_line" >> $_file || return $?
+        MSG="Add <$_line> into <$_file>."
+    else
+        echo "$_line" > $_file || return $?
+        git add $_file || return $?
+        MSG="Create file <$_file> with <$_line> inside."
+    fi
+
+    git-commit -m "$MSG" $_file
+}
+
+HASH1=
+HASH3=
+HASH4=
+
+test_expect_success \
+    'set up basic repo with 1 file (hello) and 4 commits' \
+    'add_line_into_file "1: Hello World" hello &&
+     add_line_into_file "2: A new day for git" hello &&
+     add_line_into_file "3: Another new day for git" hello &&
+     add_line_into_file "4: Ciao for now" hello &&
+     HASH1=$(git rev-list HEAD | tail -1) &&
+     HASH3=$(git rev-list HEAD | head -2 | tail -1) &&
+     HASH4=$(git rev-list HEAD | head -1)'
+
+# We want to automatically find the commit that
+# introduced "Another" into hello.
+test_expect_success \
+    'git bisect run simple case' \
+    'echo "#!/bin/sh" > test_script.sh &&
+     echo "grep Another hello > /dev/null" >> test_script.sh &&
+     echo "test \$? -ne 0" >> test_script.sh &&
+     chmod +x test_script.sh &&
+     git bisect start &&
+     git bisect good $HASH1 &&
+     git bisect bad $HASH4 &&
+     git bisect run ./test_script.sh > my_bisect_log.txt &&
+     grep "$HASH3 is first bad commit" my_bisect_log.txt'
+
+#
+#
+test_done
+
diff --git a/templates/hooks--update b/templates/hooks--update
index 8f6c4fea2..1a6077389 100644
--- a/templates/hooks--update
+++ b/templates/hooks--update
@@ -56,6 +56,12 @@ recipients=$(git-repo-config hooks.mailinglist)
 announcerecipients=$(git-repo-config hooks.announcelist)
 allowunannotated=$(git-repo-config --bool hooks.allowunannotated)
 
+# check for no description
+if [ -z "$projectdesc" -o "$projectdesc" = "Unnamed repository; edit this file to name it for gitweb" ]; then
+	echo "*** Project description file hasn't been set" >&2
+	exit 1
+fi
+
 # --- Check types
 newrev_type=$(git-cat-file -t $newrev)