aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMatthew Ogilvie <mmogilvi_git@miniinfo.net>2008-05-14 22:35:47 -0600
committerJunio C Hamano <gitster@pobox.com>2008-05-16 12:00:31 -0700
commit8a06a632976ead891115ad9ac9dea7b99c52158e (patch)
tree7e27776b28adcd37d36db97e488c5ac4534136cf
parent044182ef82f1a371c469a26a6d64c7b823aea764 (diff)
downloadgit-8a06a632976ead891115ad9ac9dea7b99c52158e.tar.gz
git-8a06a632976ead891115ad9ac9dea7b99c52158e.tar.xz
implement gitcvs.usecrlfattr
If gitcvs.usecrlfattr is set to true, git-cvsserver will consult the "crlf" for each file to determine if it should mark the file as binary (-kb). Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
-rw-r--r--Documentation/config.txt23
-rw-r--r--Documentation/git-cvsserver.txt26
-rwxr-xr-xgit-cvsserver.perl71
-rwxr-xr-xt/t9401-git-cvsserver-crlf.sh178
4 files changed, 276 insertions, 22 deletions
diff --git a/Documentation/config.txt b/Documentation/config.txt
index 217980f48..036e61e2f 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -660,11 +660,21 @@ gitcvs.logfile::
Path to a log file where the CVS server interface well... logs
various stuff. See linkgit:git-cvsserver[1].
+gitcvs.usecrlfattr
+ If true, the server will look up the `crlf` attribute for
+ files to determine the '-k' modes to use. If `crlf` is set,
+ the '-k' mode will be left blank, so cvs clients will
+ treat it as text. If `crlf` is explicitly unset, the file
+ will be set with '-kb' mode, which supresses any newline munging
+ the client might otherwise do. If `crlf` is not specified,
+ then 'gitcvs.allbinary' is used. See linkgit:gitattribute[5].
+
gitcvs.allbinary::
- If true, all files are sent to the client in mode '-kb'. This
- causes the client to treat all files as binary files which suppresses
- any newline munging it otherwise might do. A work-around for the
- fact that there is no way yet to set single files to mode '-kb'.
+ If true, all files not otherwise specified using
+ 'gitcvs.usecrlfattr' and an explicitly set or unset `crlf`
+ attribute are sent to the client in mode '-kb'. This
+ causes the client to treat them as binary files which
+ suppresses any newline munging it otherwise might do.
gitcvs.dbname::
Database used by git-cvsserver to cache revision information
@@ -695,8 +705,9 @@ gitcvs.dbTableNamePrefix::
linkgit:git-cvsserver[1] for details). Any non-alphabetic
characters will be replaced with underscores.
-All gitcvs variables except for 'gitcvs.allbinary' can also be
-specified as 'gitcvs.<access_method>.<varname>' (where 'access_method'
+All gitcvs variables except for 'gitcvs.usecrlfattr' and
+'gitcvs.allbinary' can also be specified as
+'gitcvs.<access_method>.<varname>' (where 'access_method'
is one of "ext" and "pserver") to make them apply only for the given
access method.
diff --git a/Documentation/git-cvsserver.txt b/Documentation/git-cvsserver.txt
index b1106714b..4888b8604 100644
--- a/Documentation/git-cvsserver.txt
+++ b/Documentation/git-cvsserver.txt
@@ -301,11 +301,27 @@ checkout, diff, status, update, log, add, remove, commit.
Legacy monitoring operations are not supported (edit, watch and related).
Exports and tagging (tags and branches) are not supported at this stage.
-The server should set the '-k' mode to binary when relevant, however,
-this is not really implemented yet. For now, you can force the server
-to set '-kb' for all files by setting the `gitcvs.allbinary` config
-variable. In proper GIT tradition, the contents of the files are
-always respected. No keyword expansion or newline munging is supported.
+CRLF Line Ending Conversions
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+By default the server leaves the '-k' mode blank for all files,
+which causes the cvs client to treat them as a text files, subject
+to crlf conversion on some platforms.
+
+You can make the server use `crlf` attributes to set the '-k' modes
+for files by setting the `gitcvs.usecrlfattr` config variable.
+In this case, if `crlf` is explicitly unset ('-crlf'), then the
+will set '-kb' mode, for binary files. If it `crlf` is set,
+then the '-k' mode will explicitly be left blank. See
+also linkgit:gitattributes[5] for more information about the `crlf`
+attribute.
+
+Alternatively, if `gitcvs.usecrlfattr` config is not enabled
+or if the `crlf` attribute is unspecified for a filename, then
+the server uses the `gitcvs.allbinary` for the default setting.
+If `gitcvs.allbinary` is set, then the files not otherwise
+specified will default to '-kb' mode. Otherwise the '-k' mode
+is left blank.
Dependencies
------------
diff --git a/git-cvsserver.perl b/git-cvsserver.perl
index 674892b81..58206aed7 100755
--- a/git-cvsserver.perl
+++ b/git-cvsserver.perl
@@ -502,7 +502,7 @@ sub req_add
print $state->{CVSROOT} . "/$state->{module}/$filename\n";
# this is an "entries" line
- my $kopts = kopts_from_path($filepart);
+ my $kopts = kopts_from_path($filename);
$log->debug("/$filepart/1.$meta->{revision}//$kopts/");
print "/$filepart/1.$meta->{revision}//$kopts/\n";
# permissions
@@ -533,9 +533,25 @@ sub req_add
print "Checked-in $dirpart\n";
print "$filename\n";
- my $kopts = kopts_from_path($filepart);
+ my $kopts = kopts_from_path($filename);
print "/$filepart/0//$kopts/\n";
+ my $requestedKopts = $state->{opt}{k};
+ if(defined($requestedKopts))
+ {
+ $requestedKopts = "-k$requestedKopts";
+ }
+ else
+ {
+ $requestedKopts = "";
+ }
+ if( $kopts ne $requestedKopts )
+ {
+ $log->warn("Ignoring requested -k='$requestedKopts'"
+ . " for '$filename'; detected -k='$kopts' instead");
+ #TODO: Also have option to send warning to user?
+ }
+
$addcount++;
}
@@ -615,7 +631,7 @@ sub req_remove
print "Checked-in $dirpart\n";
print "$filename\n";
- my $kopts = kopts_from_path($filepart);
+ my $kopts = kopts_from_path($filename);
print "/$filepart/-1.$wrev//$kopts/\n";
$rmcount++;
@@ -785,6 +801,7 @@ sub req_co
argsplit("co");
my $module = $state->{args}[0];
+ $state->{module} = $module;
my $checkout_path = $module;
# use the user specified directory if we're given it
@@ -862,6 +879,7 @@ sub req_co
# Don't want to check out deleted files
next if ( $git->{filehash} eq "deleted" );
+ my $fullName = $git->{name};
( $git->{name}, $git->{dir} ) = filenamesplit($git->{name});
if (length($git->{dir}) && $git->{dir} ne './'
@@ -892,7 +910,7 @@ sub req_co
print $state->{CVSROOT} . "/$module/" . ( defined ( $git->{dir} ) and $git->{dir} ne "./" ? $git->{dir} . "/" : "" ) . "$git->{name}\n";
# this is an "entries" line
- my $kopts = kopts_from_path($git->{name});
+ my $kopts = kopts_from_path($fullName);
print "/$git->{name}/1.$git->{revision}//$kopts/\n";
# permissions
print "u=$git->{mode},g=$git->{mode},o=$git->{mode}\n";
@@ -1101,7 +1119,7 @@ sub req_update
print $state->{CVSROOT} . "/$state->{module}/$filename\n";
# this is an "entries" line
- my $kopts = kopts_from_path($filepart);
+ my $kopts = kopts_from_path($filename);
$log->debug("/$filepart/1.$meta->{revision}//$kopts/");
print "/$filepart/1.$meta->{revision}//$kopts/\n";
@@ -1149,7 +1167,7 @@ sub req_update
print "Merged $dirpart\n";
$log->debug($state->{CVSROOT} . "/$state->{module}/$filename");
print $state->{CVSROOT} . "/$state->{module}/$filename\n";
- my $kopts = kopts_from_path($filepart);
+ my $kopts = kopts_from_path("$dirpart/$filepart");
$log->debug("/$filepart/1.$meta->{revision}//$kopts/");
print "/$filepart/1.$meta->{revision}//$kopts/\n";
}
@@ -1165,7 +1183,7 @@ sub req_update
{
print "Merged $dirpart\n";
print $state->{CVSROOT} . "/$state->{module}/$filename\n";
- my $kopts = kopts_from_path($filepart);
+ my $kopts = kopts_from_path("$dirpart/$filepart");
print "/$filepart/1.$meta->{revision}/+/$kopts/\n";
}
}
@@ -1416,7 +1434,7 @@ sub req_ci
}
print "Checked-in $dirpart\n";
print "$filename\n";
- my $kopts = kopts_from_path($filepart);
+ my $kopts = kopts_from_path($filename);
print "/$filepart/1.$meta->{revision}//$kopts/\n";
}
}
@@ -2296,10 +2314,24 @@ sub kopts_from_path
{
my ($path) = @_;
- # Once it exists, the git attributes system should be used to look up
- # what attributes apply to this path.
+ if ( defined ( $cfg->{gitcvs}{usecrlfattr} ) and
+ $cfg->{gitcvs}{usecrlfattr} =~ /\s*(1|true|yes)\s*$/i )
+ {
+ my ($val) = check_attr( "crlf", $path );
+ if ( $val eq "set" )
+ {
+ return "";
+ }
+ elsif ( $val eq "unset" )
+ {
+ return "-kb"
+ }
+ else
+ {
+ $log->info("Unrecognized check_attr crlf $path : $val");
+ }
+ }
- # Until then, take the setting from the config file
unless ( defined ( $cfg->{gitcvs}{allbinary} ) and $cfg->{gitcvs}{allbinary} =~ /^\s*(1|true|yes)\s*$/i )
{
# Return "" to give no special treatment to any path
@@ -2311,6 +2343,23 @@ sub kopts_from_path
}
}
+sub check_attr
+{
+ my ($attr,$path) = @_;
+ ensureWorkTree();
+ if ( open my $fh, '-|', "git", "check-attr", $attr, "--", $path )
+ {
+ my $val = <$fh>;
+ close $fh;
+ $val =~ s/.*: ([^:\r\n]*)\s*$/$1/;
+ return $val;
+ }
+ else
+ {
+ return undef;
+ }
+}
+
# Generate a CVS author name from Git author information, by taking
# the first eight characters of the user part of the email address.
sub cvs_author
diff --git a/t/t9401-git-cvsserver-crlf.sh b/t/t9401-git-cvsserver-crlf.sh
new file mode 100755
index 000000000..b7a779b78
--- /dev/null
+++ b/t/t9401-git-cvsserver-crlf.sh
@@ -0,0 +1,178 @@
+#!/bin/sh
+#
+# Copyright (c) 2008 Matthew Ogilvie
+# Parts adapted from other tests.
+#
+
+test_description='git-cvsserver -kb modes
+
+tests -kb mode for binary files when accessing a git
+repository using cvs CLI client via git-cvsserver server'
+
+. ./test-lib.sh
+
+q_to_nul () {
+ perl -pe 'y/Q/\000/'
+}
+
+q_to_cr () {
+ tr Q '\015'
+}
+
+marked_as () {
+ foundEntry="$(grep "^/$2/" "$1/CVS/Entries")"
+ if [ x"$foundEntry" = x"" ] ; then
+ echo "NOT FOUND: $1 $2 1 $3" >> "${WORKDIR}/marked.log"
+ return 1
+ fi
+ test x"$(grep "^/$2/" "$1/CVS/Entries" | cut -d/ -f5)" = x"$3"
+ stat=$?
+ echo "$1 $2 $stat '$3'" >> "${WORKDIR}/marked.log"
+ return $stat
+}
+
+not_present() {
+ foundEntry="$(grep "^/$2/" "$1/CVS/Entries")"
+ if [ -r "$1/$2" ] ; then
+ echo "Error: File still exists: $1 $2" >> "${WORKDIR}/marked.log"
+ return 1;
+ fi
+ if [ x"$foundEntry" != x"" ] ; then
+ echo "Error: should not have found: $1 $2" >> "${WORKDIR}/marked.log"
+ return 1;
+ else
+ echo "Correctly not found: $1 $2" >> "${WORKDIR}/marked.log"
+ return 0;
+ fi
+}
+
+cvs >/dev/null 2>&1
+if test $? -ne 1
+then
+ test_expect_success 'skipping git-cvsserver tests, cvs not found' :
+ test_done
+ exit
+fi
+perl -e 'use DBI; use DBD::SQLite' >/dev/null 2>&1 || {
+ test_expect_success 'skipping git-cvsserver tests, Perl SQLite interface unavailable' :
+ test_done
+ exit
+}
+
+unset GIT_DIR GIT_CONFIG
+WORKDIR=$(pwd)
+SERVERDIR=$(pwd)/gitcvs.git
+git_config="$SERVERDIR/config"
+CVSROOT=":fork:$SERVERDIR"
+CVSWORK="$(pwd)/cvswork"
+CVS_SERVER=git-cvsserver
+export CVSROOT CVS_SERVER
+
+rm -rf "$CVSWORK" "$SERVERDIR"
+test_expect_success 'setup' '
+ echo "Simple text file" >textfile.c &&
+ echo "File with embedded NUL: Q <- there" | q_to_nul > binfile.bin &&
+ mkdir subdir &&
+ echo "Another text file" > subdir/file.h &&
+ echo "Another binary: Q (this time CR)" | q_to_cr > subdir/withCr.bin &&
+ echo "Mixed up NUL, but marked text: Q <- there" | q_to_nul > mixedUp.c
+ echo "Unspecified" > subdir/unspecified.other &&
+ echo "/*.bin -crlf" > .gitattributes &&
+ echo "/*.c crlf" >> .gitattributes &&
+ echo "subdir/*.bin -crlf" >> .gitattributes &&
+ echo "subdir/*.c crlf" >> .gitattributes &&
+ echo "subdir/file.h crlf" >> .gitattributes &&
+ git add .gitattributes textfile.c binfile.bin mixedUp.c subdir/* &&
+ git commit -q -m "First Commit" &&
+ git clone -q --local --bare "$WORKDIR/.git" "$SERVERDIR" >/dev/null 2>&1 &&
+ GIT_DIR="$SERVERDIR" git config --bool gitcvs.enabled true &&
+ GIT_DIR="$SERVERDIR" git config gitcvs.logfile "$SERVERDIR/gitcvs.log"
+'
+
+test_expect_success 'cvs co (default crlf)' '
+ GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 &&
+ test x"$(grep '/-k' cvswork/CVS/Entries cvswork/subdir/CVS/Entries)" = x""
+'
+
+rm -rf cvswork
+test_expect_success 'cvs co (allbinary)' '
+ GIT_DIR="$SERVERDIR" git config --bool gitcvs.allbinary true &&
+ GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 &&
+ marked_as cvswork textfile.c -kb &&
+ marked_as cvswork binfile.bin -kb &&
+ marked_as cvswork .gitattributes -kb &&
+ marked_as cvswork mixedUp.c -kb &&
+ marked_as cvswork/subdir withCr.bin -kb &&
+ marked_as cvswork/subdir file.h -kb &&
+ marked_as cvswork/subdir unspecified.other -kb
+'
+
+rm -rf cvswork cvs.log
+test_expect_success 'cvs co (use attributes/allbinary)' '
+ GIT_DIR="$SERVERDIR" git config --bool gitcvs.usecrlfattr true &&
+ GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 &&
+ marked_as cvswork textfile.c "" &&
+ marked_as cvswork binfile.bin -kb &&
+ marked_as cvswork .gitattributes -kb &&
+ marked_as cvswork mixedUp.c "" &&
+ marked_as cvswork/subdir withCr.bin -kb &&
+ marked_as cvswork/subdir file.h "" &&
+ marked_as cvswork/subdir unspecified.other -kb
+'
+
+rm -rf cvswork
+test_expect_success 'cvs co (use attributes)' '
+ GIT_DIR="$SERVERDIR" git config --bool gitcvs.allbinary false &&
+ GIT_CONFIG="$git_config" cvs -Q co -d cvswork master >cvs.log 2>&1 &&
+ marked_as cvswork textfile.c "" &&
+ marked_as cvswork binfile.bin -kb &&
+ marked_as cvswork .gitattributes "" &&
+ marked_as cvswork mixedUp.c "" &&
+ marked_as cvswork/subdir withCr.bin -kb &&
+ marked_as cvswork/subdir file.h "" &&
+ marked_as cvswork/subdir unspecified.other ""
+'
+
+test_expect_success 'adding files' '
+ cd cvswork/subdir &&
+ echo "more text" > src.c &&
+ GIT_CONFIG="$git_config" cvs -Q add src.c >cvs.log 2>&1 &&
+ marked_as . src.c "" &&
+ echo "psuedo-binary" > temp.bin &&
+ cd .. &&
+ GIT_CONFIG="$git_config" cvs -Q add subdir/temp.bin >cvs.log 2>&1 &&
+ marked_as subdir temp.bin "-kb" &&
+ cd subdir &&
+ GIT_CONFIG="$git_config" cvs -Q ci -m "adding files" >cvs.log 2>&1 &&
+ marked_as . temp.bin "-kb" &&
+ marked_as . src.c ""
+'
+
+cd "$WORKDIR"
+test_expect_success 'updating' '
+ git pull gitcvs.git &&
+ echo 'hi' > subdir/newfile.bin &&
+ echo 'junk' > subdir/file.h &&
+ echo 'hi' > subdir/newfile.c &&
+ echo 'hello' >> binfile.bin &&
+ git add subdir/newfile.bin subdir/file.h subdir/newfile.c binfile.bin &&
+ git commit -q -m "Add and change some files" &&
+ git push gitcvs.git >/dev/null &&
+ cd cvswork &&
+ GIT_CONFIG="$git_config" cvs -Q update &&
+ cd .. &&
+ marked_as cvswork textfile.c "" &&
+ marked_as cvswork binfile.bin -kb &&
+ marked_as cvswork .gitattributes "" &&
+ marked_as cvswork mixedUp.c "" &&
+ marked_as cvswork/subdir withCr.bin -kb &&
+ marked_as cvswork/subdir file.h "" &&
+ marked_as cvswork/subdir unspecified.other "" &&
+ marked_as cvswork/subdir newfile.bin -kb &&
+ marked_as cvswork/subdir newfile.c "" &&
+ echo "File with embedded NUL: Q <- there" | q_to_nul > tmpExpect1 &&
+ echo "hello" >> tmpExpect1 &&
+ cmp cvswork/binfile.bin tmpExpect1
+'
+
+test_done