Start maintenance track for 2.10.x series

27 files changed, 1008 insertions, 90 deletions

diff --git a/Documentation/RelNotes/2.10.0.txt b/Documentation/RelNotes/2.10.0.txt
new file mode 100644
index 000000000..f4da28ab6
--- /dev/null
+++ b/Documentation/RelNotes/2.10.0.txt
@@ -0,0 +1,675 @@
+Git 2.10 Release Notes
+======================
+
+Backward compatibility notes
+----------------------------
+
+Updates since v2.9
+------------------
+
+UI, Workflows & Features
+
+ * "git pull --rebase --verify-signature" learned to warn the user
+   that "--verify-signature" is a no-op when rebasing.
+
+ * An upstream project can make a recommendation to shallowly clone
+   some submodules in the .gitmodules file it ships.
+
+ * "git worktree add" learned that '-' can be used as a short-hand for
+   "@{-1}", the previous branch.
+
+ * Update the funcname definition to support css files.
+
+ * The completion script (in contrib/) learned to complete "git
+   status" options.
+
+ * Messages that are generated by auto gc during "git push" on the
+   receiving end are now passed back to the sending end in such a way
+   that they are shown with "remote: " prefix to avoid confusing the
+   users.
+
+ * "git add -i/-p" learned to honor diff.compactionHeuristic
+   experimental knob, so that the user can work on the same hunk split
+   as "git diff" output.
+
+ * "upload-pack" allows a custom "git pack-objects" replacement when
+   responding to "fetch/clone" via the uploadpack.packObjectsHook.
+   (merge b738396 jk/upload-pack-hook later to maint).
+
+ * Teach format-patch and mailsplit (hence "am") how a line that
+   happens to begin with "From " in the e-mail message is quoted with
+   ">", so that these lines can be restored to their original shape.
+   (merge d9925d1 ew/mboxrd-format-am later to maint).
+
+ * "git repack" learned the "--keep-unreachable" option, which sends
+   loose unreachable objects to a pack instead of leaving them loose.
+   This helps heuristics based on the number of loose objects
+   (e.g. "gc --auto").
+   (merge e26a8c4 jk/repack-keep-unreachable later to maint).
+
+ * "log --graph --format=" learned that "%>|(N)" specifies the width
+   relative to the terminal's left edge, not relative to the area to
+   draw text that is to the right of the ancestry-graph section.  It
+   also now accepts negative N that means the column limit is relative
+   to the right border.
+
+ * A careless invocation of "git send-email directory/" after editing
+   0001-change.patch with an editor often ends up sending both
+   0001-change.patch and its backup file, 0001-change.patch~, causing
+   embarrassment and a minor confusion.  Detect such an input and
+   offer to skip the backup files when sending the patches out.
+   (merge 531220b jc/send-email-skip-backup later to maint).
+
+ * "git submodule update" that drives many "git clone" could
+   eventually hit flaky servers/network conditions on one of the
+   submodules; the command learned to retry the attempt.
+
+ * The output coloring scheme learned two new attributes, italic and
+   strike, in addition to existing bold, reverse, etc.
+
+ * "git log" learns log.showSignature configuration variable, and a
+   command line option "--no-show-signature" to countermand it.
+   (merge fce04c3 mj/log-show-signature-conf later to maint).
+
+ * More markings of messages for i18n, with updates to various tests
+   to pass GETTEXT_POISON tests.
+
+ * "git archive" learned to handle files that are larger than 8GB and
+   commits far in the future than expressible by the traditional US-TAR
+   format.
+   (merge 560b0e8 jk/big-and-future-archive-tar later to maint).
+
+
+ * A new configuration variable core.sshCommand has been added to
+   specify what value for GIT_SSH_COMMAND to use per repository.
+
+ * "git worktree prune" protected worktrees that are marked as
+   "locked" by creating a file in a known location.  "git worktree"
+   command learned a dedicated command pair to create and remove such
+   a file, so that the users do not have to do this with editor.
+
+ * A handful of "git svn" updates.
+
+ * "git push" learned to accept and pass extra options to the
+   receiving end so that hooks can read and react to them.
+
+ * "git status" learned to suggest "merge --abort" during a conflicted
+   merge, just like it already suggests "rebase --abort" during a
+   conflicted rebase.
+
+ * "git jump" script (in contrib/) has been updated a bit.
+   (merge a91e692 jk/git-jump later to maint).
+
+ * "git push" and "git clone" learned to give better progress meters
+   to the end user who is waiting on the terminal.
+
+ * An entry "git log --decorate" for the tip of the current branch is
+   shown as "HEAD -> name" (where "name" is the name of the branch);
+   the arrow is now painted in the same color as "HEAD", not in the
+   color for commits.
+
+ * "git format-patch" learned format.from configuration variable to
+   specify the default settings for its "--from" option.
+
+ * "git am -3" calls "git merge-recursive" when it needs to fall back
+   to a three-way merge; this call has been turned into an internal
+   subroutine call instead of spawning a separate subprocess.
+
+ * The command line completion scripts (in contrib/) now knows about
+   "git branch --delete/--move [--remote]".
+   (merge 2703c22 vs/completion-branch-fully-spelled-d-m-r later to maint).
+
+ * "git rev-parse --git-path hooks/<hook>" learned to take
+   core.hooksPath configuration variable (introduced during 2.9 cycle)
+   into account.
+   (merge 9445b49 ab/hooks later to maint).
+
+ * "git log --show-signature" and other commands that display the
+   verification status of PGP signature now shows the longer key-id,
+   as 32-bit key-id is so last century.
+
+
+Performance, Internal Implementation, Development Support etc.
+
+ * "git fast-import" learned the same performance trick to avoid
+   creating too small a packfile as "git fetch" and "git push" have,
+   using *.unpackLimit configuration.
+
+ * When "git daemon" is run without --[init-]timeout specified, a
+   connection from a client that silently goes offline can hang around
+   for a long time, wasting resources.  The socket-level KEEPALIVE has
+   been enabled to allow the OS to notice such failed connections.
+
+ * "git upload-pack" command has been updated to use the parse-options
+   API.
+
+ * The "git apply" standalone program is being libified; the first
+   step to move many state variables into a structure that can be
+   explicitly (re)initialized to make the machinery callable more
+   than once has been merged.
+
+ * HTTP transport gained an option to produce more detailed debugging
+   trace.
+   (merge 73e57aa ep/http-curl-trace later to maint).
+
+ * Instead of taking advantage of the fact that a struct string_list
+   that is allocated with all NULs happens to be the INIT_NODUP kind,
+   the users of string_list structures are taught to initialize them
+   explicitly as such, to document their behaviour better.
+   (merge 2721ce2 jk/string-list-static-init later to maint).
+
+ * HTTPd tests learned to show the server error log to help diagnosing
+   a failing tests.
+   (merge 44f243d nd/test-lib-httpd-show-error-log-in-verbose later to maint).
+
+ * The ownership rule for the piece of memory that hold references to
+   be fetched in "git fetch" was screwy, which has been cleaned up.
+
+ * "git bisect" makes an internal call to "git diff-tree" when
+   bisection finds the culprit, but this call did not initialize the
+   data structure to pass to the diff-tree API correctly.
+
+ * Further preparatory clean-up for "worktree" feature continues.
+   (merge 0409e0b nd/worktree-cleanup-post-head-protection later to maint).
+
+ * Formats of the various data (and how to validate them) where we use
+   GPG signature have been documented.
+
+ * A new run-command API function pipe_command() is introduced to
+   sanely feed data to the standard input while capturing data from
+   the standard output and the standard error of an external process,
+   which is cumbersome to hand-roll correctly without deadlocking.
+
+ * The codepath to sign data in a prepared buffer with GPG has been
+   updated to use this API to read from the status-fd to check for
+   errors (instead of relying on GPG's exit status).
+   (merge efee955 jk/gpg-interface-cleanup later to maint).
+
+ * Allow t/perf framework to use the features from the most recent
+   version of Git even when testing an older installed version.
+
+ * The commands in the "log/diff" family have had an FILE* pointer in the
+   data structure they pass around for a long time, but some codepaths
+   used to always write to the standard output.  As a preparatory step
+   to make "git format-patch" available to the internal callers, these
+   codepaths have been updated to consistently write into that FILE*
+   instead.
+
+ * Conversion from unsigned char sha1[20] to struct object_id
+   continues.
+
+ * Improve the look of the way "git fetch" reports what happened to
+   each ref that was fetched.
+
+ * The .c/.h sources are marked as such in our .gitattributes file so
+   that "git diff -W" and friends would work better.
+
+ * Code clean-up to avoid using a variable string that compilers may
+   feel untrustable as printf-style format given to write_file()
+   helper function.
+
+ * "git p4" used a location outside $GIT_DIR/refs/ to place its
+   temporary branches, which has been moved to refs/git-p4-tmp/.
+
+ * Existing autoconf generated test for the need to link with pthread
+   library did not check all the functions from pthread libraries;
+   recent FreeBSD has some functions in libc but not others, and we
+   mistakenly thought linking with libc is enough when it is not.
+
+ * When "git fsck" reports a broken link (e.g. a tree object contains
+   a blob that does not exist), both containing object and the object
+   that is referred to were reported with their 40-hex object names.
+   The command learned the "--name-objects" option to show the path to
+   the containing object from existing refs (e.g. "HEAD~24^2:file.txt").
+
+ * Allow http daemon tests in Travis CI tests.
+
+ * Makefile assumed that -lrt is always available on platforms that
+   want to use clock_gettime() and CLOCK_MONOTONIC, which is not a
+   case for recent Mac OS X.  The necessary symbols are often found in
+   libc on many modern systems and having -lrt on the command line, as
+   long as the library exists, had no effect, but when the platform
+   removes librt.a that is a different matter--having -lrt will break
+   the linkage.
+
+   This change could be seen as a regression for those who do need to
+   specify -lrt, as they now specifically ask for NEEDS_LIBRT when
+   building. Hopefully they are in the minority these days.
+
+ * Further preparatory work on the refs API before the pluggable
+   backend series can land.
+
+ * Error handling in the codepaths that updates refs has been
+   improved.
+
+ * The API to iterate over all the refs (i.e. for_each_ref(), etc.)
+   has been revamped.
+
+ * The handling of the "text=auto" attribute has been corrected.
+   $ echo "* text=auto eol=crlf" >.gitattributes
+   used to have the same effect as
+   $ echo "* text eol=crlf" >.gitattributes
+   i.e. declaring all files are text (ignoring "auto").  The
+   combination has been fixed to be equivalent to doing
+   $ git config core.autocrlf true
+
+ * Documentation has been updated to show better example usage
+   of the updated "text=auto" attribute.
+
+ * A few tests that specifically target "git rebase -i" have been
+   added.
+
+ * Dumb http transport on the client side has been optimized.
+   (merge ecba195 ew/http-walker later to maint).
+
+ * Users of the parse_options_concat() API function need to allocate
+   extra slots in advance and fill them with OPT_END() when they want
+   to decide the set of supported options dynamically, which makes the
+   code error-prone and hard to read.  This has been corrected by tweaking
+   the API to allocate and return a new copy of "struct option" array.
+
+ * "git fetch" exchanges batched have/ack messages between the sender
+   and the receiver, initially doubling every time and then falling
+   back to enlarge the window size linearly.  The "smart http"
+   transport, being an half-duplex protocol, outgrows the preset limit
+   too quickly and becomes inefficient when interacting with a large
+   repository.  The internal mechanism learned to grow the window size
+   more aggressively when working with the "smart http" transport.
+
+ * Tests for "git svn" have been taught to reuse the lib-httpd test
+   infrastructure when testing the subversion integration that
+   interacts with subversion repositories served over the http://
+   protocol.
+   (merge a8a5d25 ew/git-svn-http-tests later to maint).
+
+ * "git pack-objects" has a few options that tell it not to pack
+   objects found in certain packfiles, which require it to scan .idx
+   files of all available packs.  The codepaths involved in these
+   operations have been optimized for a common case of not having any
+   non-local pack and/or any .kept pack.
+
+ * The t3700 test about "add --chmod=-x" have been made a bit more
+   robust and generally cleaned up.
+   (merge 766cdc4 ib/t3700-add-chmod-x-updates later to maint).
+
+ * The build procedure learned PAGER_ENV knob that lists what default
+   environment variable settings to export for popular pagers.  This
+   mechanism is used to tweak the default settings to MORE on FreeBSD.
+   (merge 995bc22 ew/build-time-pager-tweaks later to maint).
+
+ * The http-backend (the server-side component of smart-http
+   transport) used to trickle the HTTP header one at a time.  Now
+   these write(2)s are batched.
+   (merge b36045c ew/http-backend-batch-headers later to maint).
+
+ * When "git rebase" tries to compare set of changes on the updated
+   upstream and our own branch, it computes patch-id for all of these
+   changes and attempts to find matches. This has been optimized by
+   lazily computing the full patch-id (which is expensive) to be
+   compared only for changes that touch the same set of paths.
+   (merge ba67504 kw/patch-ids-optim later to maint).
+
+ * A handful of tests that were broken under gettext-poison build have
+   been fixed.
+
+ * The recent i18n patch we added during this cycle did a bit too much
+   refactoring of the messages to avoid word-legos; the repetition has
+   been reduced to help translators.
+
+
+Also contains various documentation updates and code clean-ups.
+
+
+Fixes since v2.9
+----------------
+
+Unless otherwise noted, all the fixes since v2.8 in the maintenance
+track are contained in this release (see the maintenance releases'
+notes for details).
+
+ * The commands in `git log` family take %C(auto) in a custom format
+   string.  This unconditionally turned the color on, ignoring
+   --no-color or with --color=auto when the output is not connected to
+   a tty; this was corrected to make the format truly behave as
+   "auto".
+
+ * "git rev-list --count" whose walk-length is limited with "-n"
+   option did not work well with the counting optimized to look at the
+   bitmap index.
+
+ * "git show -W" (extend hunks to cover the entire function, delimited
+   by lines that match the "funcname" pattern) used to show the entire
+   file when a change added an entire function at the end of the file,
+   which has been fixed.
+
+ * The documentation set has been updated so that literal commands,
+   configuration variables and environment variables are consistently
+   typeset in fixed-width font and bold in manpages.
+
+ * "git svn propset" subcommand that was added in 2.3 days is
+   documented now.
+
+ * The documentation tries to consistently spell "GPG"; when
+   referring to the specific program name, "gpg" is used.
+
+ * "git reflog" stopped upon seeing an entry that denotes a branch
+   creation event (aka "unborn"), which made it appear as if the
+   reflog was truncated.
+
+ * The git-prompt scriptlet (in contrib/) was not friendly with those
+   who uses "set -u", which has been fixed.
+
+ * compat/regex code did not cleanly compile.
+
+ * A codepath that used alloca(3) to place an unbounded amount of data
+   on the stack has been updated to avoid doing so.
+
+ * "git update-index --add --chmod=+x file" may be usable as an escape
+   hatch, but not a friendly thing to force for people who do need to
+   use it regularly.  "git add --chmod=+x file" can be used instead.
+
+ * Build improvements for gnome-keyring (in contrib/)
+
+ * "git status" used to say "working directory" when it meant "working
+   tree".
+
+ * Comments about misbehaving FreeBSD shells have been clarified with
+   the version number (9.x and before are broken, newer ones are OK).
+
+ * "git cherry-pick A" worked on an unborn branch, but "git
+   cherry-pick A..B" didn't.
+
+ * Fix an unintended regression in v2.9 that breaks "clone --depth"
+   that recurses down to submodules by forcing the submodules to also
+   be cloned shallowly, which many server instances that host upstream
+   of the submodules are not prepared for.
+
+ * Fix unnecessarily waste in the idiomatic use of ': ${VAR=default}'
+   to set the default value, without enclosing it in double quotes.
+
+ * Some platform-specific code had non-ANSI strict declarations of C
+   functions that do not take any parameters, which has been
+   corrected.
+
+ * The internal code used to show local timezone offset is not
+   prepared to handle timestamps beyond year 2100, and gave a
+   bogus offset value to the caller.  Use a more benign looking
+   +0000 instead and let "git log" going in such a case, instead
+   of aborting.
+
+ * One among four invocations of readlink(1) in our test suite has
+   been rewritten so that the test can run on systems without the
+   command (others are in valgrind test framework and t9802).
+
+ * t/perf needs /usr/bin/time with GNU extension; the invocation of it
+   is updated to "gtime" on Darwin.
+
+ * A bug, which caused "git p4" while running under verbose mode to
+   report paths that are omitted due to branch prefix incorrectly, has
+   been fixed; the command said "Ignoring file outside of prefix" for
+   paths that are _inside_.
+
+ * The top level documentation "git help git" still pointed at the
+   documentation set hosted at now-defunct google-code repository.
+   Update it to point to https://git.github.io/htmldocs/git.html
+   instead.
+
+ * A helper function that takes the contents of a commit object and
+   finds its subject line did not ignore leading blank lines, as is
+   commonly done by other codepaths.  Make it ignore leading blank
+   lines to match.
+
+ * For a long time, we carried an in-code comment that said our
+   colored output would work only when we use fprintf/fputs on
+   Windows, which no longer is the case for the past few years.
+
+ * "gc.autoPackLimit" when set to 1 should not trigger a repacking
+   when there is only one pack, but the code counted poorly and did
+   so.
+
+ * Add a test to specify the desired behaviour that currently is not
+   available in "git rebase -Xsubtree=...".
+
+ * More mark-up updates to typeset strings that are expected to
+   literally typed by the end user in fixed-width font.
+
+ * "git commit --amend --allow-empty-message -S" for a commit without
+   any message body could have misidentified where the header of the
+   commit object ends.
+
+ * "git rebase -i --autostash" did not restore the auto-stashed change
+   when the operation was aborted.
+
+ * Git does not know what the contents in the index should be for a
+   path added with "git add -N" yet, so "git grep --cached" should not
+   show hits (or show lack of hits, with -L) in such a path, but that
+   logic does not apply to "git grep", i.e. searching in the working
+   tree files.  But we did so by mistake, which has been corrected.
+
+ * "git blame -M" missed a single line that was moved within the file.
+
+ * Fix recently introduced codepaths that are involved in parallel
+   submodule operations, which gave up on reading too early, and
+   could have wasted CPU while attempting to write under a corner
+   case condition.
+
+ * "git grep -i" has been taught to fold case in non-ascii locales
+   correctly.
+
+ * A test that unconditionally used "mktemp" learned that the command
+   is not necessarily available everywhere.
+
+ * There are certain house-keeping tasks that need to be performed at
+   the very beginning of any Git program, and programs that are not
+   built-in commands had to do them exactly the same way as "git"
+   potty does.  It was easy to make mistakes in one-off standalone
+   programs (like test helpers).  A common "main()" function that
+   calls cmd_main() of individual program has been introduced to
+   make it harder to make mistakes.
+   (merge de61ceb jk/common-main later to maint).
+
+ * The test framework learned a new helper test_match_signal to
+   check an exit code from getting killed by an expected signal.
+
+ * General code clean-up around a helper function to write a
+   single-liner to a file.
+   (merge 7eb6e10 jk/write-file later to maint).
+
+ * One part of "git am" had an oddball helper function that called
+   stuff from outside "his" as opposed to calling what we have "ours",
+   which was not gender-neutral and also inconsistent with the rest of
+   the system where outside stuff is usuall called "theirs" in
+   contrast to "ours".
+
+ * "git blame file" allowed the lineage of lines in the uncommitted,
+   unadded contents of "file" to be inspected, but it refused when
+   "file" did not appear in the current commit.  When "file" was
+   created by renaming an existing file (but the change has not been
+   committed), this restriction was unnecessarily tight.
+
+ * "git add -N dir/file && git write-tree" produced an incorrect tree
+   when there are other paths in the same directory that sorts after
+   "file".
+
+ * "git fetch http://user:pass@host/repo..." scrubbed the userinfo
+   part, but "git push" didn't.
+
+ * "git merge" with renormalization did not work well with
+   merge-recursive, due to "safer crlf" conversion kicking in when it
+   shouldn't.
+   (merge 1335d76 jc/renormalize-merge-kill-safer-crlf later to maint).
+
+ * The use of strbuf in "git rm" to build filename to remove was a bit
+   suboptimal, which has been fixed.
+
+ * An age old bug that caused "git diff --ignore-space-at-eol"
+   misbehave has been fixed.
+
+ * "git notes merge" had a code to see if a path exists (and fails if
+   it does) and then open the path for writing (when it doesn't).
+   Replace it with open with O_EXCL.
+
+ * "git pack-objects" and "git index-pack" mostly operate with off_t
+   when talking about the offset of objects in a packfile, but there
+   were a handful of places that used "unsigned long" to hold that
+   value, leading to an unintended truncation.
+
+ * Recent update to "git daemon" tries to enable the socket-level
+   KEEPALIVE, but when it is spawned via inetd, the standard input
+   file descriptor may not necessarily be connected to a socket.
+   Suppress an ENOTSOCK error from setsockopt().
+
+ * Recent FreeBSD stopped making perl available at /usr/bin/perl;
+   switch the default the built-in path to /usr/local/bin/perl on not
+   too ancient FreeBSD releases.
+
+ * "git commit --help" said "--no-verify" is only about skipping the
+   pre-commit hook, and failed to say that it also skipped the
+   commit-msg hook.
+
+ * "git merge" in Git v2.9 was taught to forbid merging an unrelated
+   lines of history by default, but that is exactly the kind of thing
+   the "--rejoin" mode of "git subtree" (in contrib/) wants to do.
+   "git subtree" has been taught to use the "--allow-unrelated-histories"
+   option to override the default.
+
+ * The build procedure for "git persistent-https" helper (in contrib/)
+   has been updated so that it can be built with more recent versions
+   of Go.
+
+ * There is an optimization used in "git diff $treeA $treeB" to borrow
+   an already checked-out copy in the working tree when it is known to
+   be the same as the blob being compared, expecting that open/mmap of
+   such a file is faster than reading it from the object store, which
+   involves inflating and applying delta.  This however kicked in even
+   when the checked-out copy needs to go through the convert-to-git
+   conversion (including the clean filter), which defeats the whole
+   point of the optimization.  The optimization has been disabled when
+   the conversion is necessary.
+
+ * "git -c grep.patternType=extended log --basic-regexp" misbehaved
+   because the internal API to access the grep machinery was not
+   designed well.
+
+ * Windows port was failing some tests in t4130, due to the lack of
+   inum in the returned values by its lstat(2) emulation.
+
+ * The reflog output format is documented better, and a new format
+   --date=unix to report the seconds-since-epoch (without timezone)
+   has been added.
+   (merge 442f6fd jk/reflog-date later to maint).
+
+ * "git difftool <paths>..." started in a subdirectory failed to
+   interpret the paths relative to that directory, which has been
+   fixed.
+
+ * The characters in the label shown for tags/refs for commits in
+   "gitweb" output are now properly escaped for proper HTML output.
+
+ * FreeBSD can lie when asked mtime of a directory, which made the
+   untracked cache code to fall back to a slow-path, which in turn
+   caused tests in t7063 to fail because it wanted to verify the
+   behaviour of the fast-path.
+
+ * Squelch compiler warnings for nedmalloc (in compat/) library.
+
+ * A small memory leak in the command line parsing of "git blame"
+   has been plugged.
+
+ * The API documentation for hashmap was unclear if hashmap_entry
+   can be safely discarded without any other consideration.  State
+   that it is safe to do so.
+
+ * Not-so-recent rewrite of "git am" that started making internal
+   calls into the commit machinery had an unintended regression, in
+   that no matter how many seconds it took to apply many patches, the
+   resulting committer timestamp for the resulting commits were all
+   the same.
+
+ * "git push --force-with-lease" already had enough logic to allow
+   ensuring that such a push results in creation of a ref (i.e. the
+   receiving end did not have another push from sideways that would be
+   discarded by our force-pushing), but didn't expose this possibility
+   to the users.  It does so now.
+   (merge 9eed4f3 jk/push-force-with-lease-creation later to maint).
+
+ * The mechanism to limit the pack window memory size, when packing is
+   done using multiple threads (which is the default), is per-thread,
+   but this was not documented clearly.
+   (merge 954176c ms/document-pack-window-memory-is-per-thread later to maint).
+
+ * "import-tars" fast-import script (in contrib/) used to ignore a
+   hardlink target and replaced it with an empty file, which has been
+   corrected to record the same blob as the other file the hardlink is
+   shared with.
+   (merge 04e0869 js/import-tars-hardlinks later to maint).
+
+ * "git mv dir non-existing-dir/" did not work in some environments
+   the same way as existing mainstream platforms.  The code now moves
+   "dir" to "non-existing-dir", without relying on rename("A", "B/")
+   that strips the trailing slash of '/'.
+   (merge 189d035 js/mv-dir-to-new-directory later to maint).
+
+ * The "t/" hierarchy is prone to get an unusual pathname; "make test"
+   has been taught to make sure they do not contain paths that cannot
+   be checked out on Windows (and the mechanism can be reusable to
+   catch pathnames that are not portable to other platforms as need
+   arises).
+   (merge c2cafd3 js/test-lint-pathname later to maint).
+
+ * When "git merge-recursive" works on history with many criss-cross
+   merges in "verbose" mode, the names the command assigns to the
+   virtual merge bases could have overwritten each other by unintended
+   reuse of the same piece of memory.
+   (merge 5447a76 rs/pull-signed-tag later to maint).
+
+ * "git checkout --detach <branch>" used to give the same advice
+   message as that is issued when "git checkout <tag>" (or anything
+   that is not a branch name) is given, but asking with "--detach" is
+   an explicit enough sign that the user knows what is going on.  The
+   advice message has been squelched in this case.
+   (merge 779b88a sb/checkout-explit-detach-no-advice later to maint).
+
+ * "git difftool" by default ignores the error exit from the backend
+   commands it spawns, because often they signal that they found
+   differences by exiting with a non-zero status code just like "diff"
+   does; the exit status codes 126 and above however are special in
+   that they are used to signal that the command is not executable,
+   does not exist, or killed by a signal.  "git difftool" has been
+   taught to notice these exit status codes.
+   (merge 45a4f5d jk/difftool-command-not-found later to maint).
+
+ * On Windows, help.browser configuration variable used to be ignored,
+   which has been corrected.
+   (merge 6db5967 js/no-html-bypass-on-windows later to maint).
+
+ * The "git -c var[=val] cmd" facility to append a configuration
+   variable definition at the end of the search order was described in
+   git(1) manual page, but not in git-config(1), which was more likely
+   place for people to look for when they ask "can I make a one-shot
+   override, and if so how?"
+   (merge ae1f709 dg/document-git-c-in-git-config-doc later to maint).
+
+ * The tempfile (hence its user lockfile) API lets the caller to open
+   a file descriptor to a temporary file, write into it and then
+   finalize it by first closing the filehandle and then either
+   removing or renaming the temporary file.  When the process spawns a
+   subprocess after obtaining the file descriptor, and if the
+   subprocess has not exited when the attempt to remove or rename is
+   made, the last step fails on Windows, because the subprocess has
+   the file descriptor still open.  Open tempfile with O_CLOEXEC flag
+   to avoid this (on Windows, this is mapped to O_NOINHERIT).
+   (merge 05d1ed6 bw/mingw-avoid-inheriting-fd-to-lockfile later to maint).
+
+ * Correct an age-old calco (is that a typo-like word for calc)
+   in the documentation.
+   (merge 7841c48 ls/packet-line-protocol-doc-fix later to maint).
+
+ * Other minor clean-ups and documentation updates
+   (merge 02a8cfa rs/merge-add-strategies-simplification later to maint).
+   (merge af4941d rs/merge-recursive-string-list-init later to maint).
+   (merge 1eb47f1 rs/use-strbuf-add-unique-abbrev later to maint).
+   (merge ddd0bfa jk/tighten-alloc later to maint).
+   (merge ecf30b2 rs/mailinfo-lib later to maint).
+   (merge 0eb75ce sg/reflog-past-root later to maint).
+   (merge 4369523 hv/doc-commit-reference-style later to maint).
diff --git a/Documentation/RelNotes/2.3.10.txt b/Documentation/RelNotes/2.3.10.txt
index 9d425d814..20c2d2cac 100644
--- a/Documentation/RelNotes/2.3.10.txt
+++ b/Documentation/RelNotes/2.3.10.txt
@@ -7,7 +7,7 @@ Fixes since v2.3.9
  * xdiff code we use to generate diffs is not prepared to handle
    extremely large files.  It uses "int" in many places, which can
    overflow if we have a very large number of lines or even bytes in
-   our input files, for example.  Cap the input size to soemwhere
+   our input files, for example.  Cap the input size to somewhere
    around 1GB for now.
 
  * Some protocols (like git-remote-ext) can execute arbitrary code
diff --git a/Documentation/RelNotes/2.4.10.txt b/Documentation/RelNotes/2.4.10.txt
index 8621199bc..702d8d4e2 100644
--- a/Documentation/RelNotes/2.4.10.txt
+++ b/Documentation/RelNotes/2.4.10.txt
@@ -7,7 +7,7 @@ Fixes since v2.4.9
  * xdiff code we use to generate diffs is not prepared to handle
    extremely large files.  It uses "int" in many places, which can
    overflow if we have a very large number of lines or even bytes in
-   our input files, for example.  Cap the input size to soemwhere
+   our input files, for example.  Cap the input size to somewhere
    around 1GB for now.
 
  * Some protocols (like git-remote-ext) can execute arbitrary code
diff --git a/Documentation/RelNotes/2.5.4.txt b/Documentation/RelNotes/2.5.4.txt
index a5e8477a4..b8a2f93ee 100644
--- a/Documentation/RelNotes/2.5.4.txt
+++ b/Documentation/RelNotes/2.5.4.txt
@@ -7,7 +7,7 @@ Fixes since v2.5.4
  * xdiff code we use to generate diffs is not prepared to handle
    extremely large files.  It uses "int" in many places, which can
    overflow if we have a very large number of lines or even bytes in
-   our input files, for example.  Cap the input size to soemwhere
+   our input files, for example.  Cap the input size to somewhere
    around 1GB for now.
 
  * Some protocols (like git-remote-ext) can execute arbitrary code
diff --git a/Documentation/RelNotes/2.6.1.txt b/Documentation/RelNotes/2.6.1.txt
index 1e51363e3..f37ea89cd 100644
--- a/Documentation/RelNotes/2.6.1.txt
+++ b/Documentation/RelNotes/2.6.1.txt
@@ -7,7 +7,7 @@ Fixes since v2.6
  * xdiff code we use to generate diffs is not prepared to handle
    extremely large files.  It uses "int" in many places, which can
    overflow if we have a very large number of lines or even bytes in
-   our input files, for example.  Cap the input size to soemwhere
+   our input files, for example.  Cap the input size to somewhere
    around 1GB for now.
 
  * Some protocols (like git-remote-ext) can execute arbitrary code
diff --git a/Documentation/config.txt b/Documentation/config.txt
index f4721a048..0bcb6790d 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -150,27 +150,34 @@ integer::
        1024", "by 1024x1024", etc.
 
 color::
-       The value for a variables that takes a color is a list of
-       colors (at most two) and attributes (at most one), separated
-       by spaces.  The colors accepted are `normal`, `black`,
-       `red`, `green`, `yellow`, `blue`, `magenta`, `cyan` and
-       `white`; the attributes are `bold`, `dim`, `ul`, `blink` and
-       `reverse`.  The first color given is the foreground; the
-       second is the background.  The position of the attribute, if
-       any, doesn't matter. Attributes may be turned off specifically
-       by prefixing them with `no` (e.g., `noreverse`, `noul`, etc).
-+
-Colors (foreground and background) may also be given as numbers between
-0 and 255; these use ANSI 256-color mode (but note that not all
-terminals may support this).  If your terminal supports it, you may also
-specify 24-bit RGB values as hex, like `#ff0ab3`.
-+
-The attributes are meant to be reset at the beginning of each item
-in the colored output, so setting color.decorate.branch to `black`
-will paint that branch name in a plain `black`, even if the previous
-thing on the same output line (e.g. opening parenthesis before the
-list of branch names in `log --decorate` output) is set to be
-painted with `bold` or some other attribute.
+       The value for a variable that takes a color is a list of
+       colors (at most two, one for foreground and one for background)
+       and attributes (as many as you want), separated by spaces.
++
+The basic colors accepted are `normal`, `black`, `red`, `green`, `yellow`,
+`blue`, `magenta`, `cyan` and `white`.  The first color given is the
+foreground; the second is the background.
++
+Colors may also be given as numbers between 0 and 255; these use ANSI
+256-color mode (but note that not all terminals may support this).  If
+your terminal supports it, you may also specify 24-bit RGB values as
+hex, like `#ff0ab3`.
++
+The accepted attributes are `bold`, `dim`, `ul`, `blink`, `reverse`,
+`italic`, and `strike` (for crossed-out or "strikethrough" letters).
+The position of any attributes with respect to the colors
+(before, after, or in between), doesn't matter. Specific attributes may
+be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
+`no-ul`, etc).
++
+For git's pre-defined color slots, the attributes are meant to be reset
+at the beginning of each item in the colored output. So setting
+`color.decorate.branch` to `black` will paint that branch name in a
+plain `black`, even if the previous thing on the same output line (e.g.
+opening parenthesis before the list of branch names in `log --decorate`
+output) is set to be painted with `bold` or some other attribute.
+However, custom log formats may do more complicated and layered
+coloring, and the negated forms may be useful there.
 
 pathname::
 	A variable that takes a pathname value can be given a
@@ -441,6 +448,13 @@ specify that no proxy be used for a given domain pattern.
 This is useful for excluding servers inside a firewall from
 proxy use, while defaulting to a common proxy for external domains.
 
+core.sshCommand::
+	If this variable is set, `git fetch` and `git push` will
+	use the specified command instead of `ssh` when they need to
+	connect to a remote system. The command is in the same form as
+	the `GIT_SSH_COMMAND` environment variable and is overridden
+	when the environment variable is set.
+
 core.ignoreStat::
 	If true, Git will avoid using lstat() calls to detect if files have
 	changed by setting the "assume-unchanged" bit for those tracked files
@@ -1187,6 +1201,15 @@ difftool.<tool>.cmd::
 difftool.prompt::
 	Prompt before each invocation of the diff tool.
 
+fastimport.unpackLimit::
+	If the number of objects imported by linkgit:git-fast-import[1]
+	is below this limit, then the objects will be unpacked into
+	loose object files.  However if the number of imported objects
+	equals or exceeds this limit then the pack will be stored as a
+	pack.  Storing the pack from a fast-import can make the import
+	operation complete faster, especially on slow filesystems.  If
+	not set, the value of `transfer.unpackLimit` is used instead.
+
 fetch.recurseSubmodules::
 	This option can be either set to a boolean value or to 'on-demand'.
 	Setting it to a boolean changes the behavior of fetch and pull to
@@ -1218,6 +1241,11 @@ fetch.prune::
 	If true, fetch will automatically behave as if the `--prune`
 	option was given on the command line.  See also `remote.<name>.prune`.
 
+fetch.output::
+	Control how ref update status is printed. Valid values are
+	`full` and `compact`. Default value is `full`. See section
+	OUTPUT in linkgit:git-fetch[1] for detail.
+
 format.attach::
 	Enable multipart/mixed attachments as the default for
 	'format-patch'.  The value can also be a double quoted string
@@ -1225,6 +1253,16 @@ format.attach::
 	value as the boundary.  See the --attach option in
 	linkgit:git-format-patch[1].
 
+format.from::
+	Provides the default value for the `--from` option to format-patch.
+	Accepts a boolean value, or a name and email address.  If false,
+	format-patch defaults to `--no-from`, using commit authors directly in
+	the "From:" field of patch mails.  If true, format-patch defaults to
+	`--from`, using your committer identity in the "From:" field of patch
+	mails and including a "From:" field in the body of the patch mail if
+	different.  If set to a non-boolean value, format-patch uses that
+	value instead of your committer identity.  Defaults to false.
+
 format.numbered::
 	A boolean which can enable or disable sequence numbers in patch
 	subjects.  It defaults to "auto" which enables it only if there
@@ -2399,8 +2437,13 @@ rebase.instructionFormat
 
 receive.advertiseAtomic::
 	By default, git-receive-pack will advertise the atomic push
-	capability to its clients. If you don't want to this capability
-	to be advertised, set this variable to false.
+	capability to its clients. If you don't want to advertise this
+	capability, set this variable to false.
+
+receive.advertisePushOptions::
+	By default, git-receive-pack will advertise the push options
+	capability to its clients. If you don't want to advertise this
+	capability, set this variable to false.
 
 receive.autogc::
 	By default, git-receive-pack will run "git-gc --auto" after
@@ -2455,6 +2498,15 @@ receive.fsck.skipList::
 	can be safely ignored such as invalid committer email addresses.
 	Note: corrupt objects cannot be skipped with this setting.
 
+receive.keepAlive::
+	After receiving the pack from the client, `receive-pack` may
+	produce no output (if `--quiet` was specified) while processing
+	the pack, causing some networks to drop the TCP connection.
+	With this option set, if `receive-pack` does not transmit
+	any data in this phase for `receive.keepAlive` seconds, it will
+	send a short keepalive packet.  The default is 5 seconds; set
+	to 0 to disable keepalives entirely.
+
 receive.unpackLimit::
 	If the number of objects received in a push is below this
 	limit then the objects will be unpacked into loose object
@@ -2881,6 +2933,21 @@ uploadpack.keepAlive::
 	`uploadpack.keepAlive` seconds. Setting this option to 0
 	disables keepalive packets entirely. The default is 5 seconds.
 
+uploadpack.packObjectsHook::
+	If this option is set, when `upload-pack` would run
+	`git pack-objects` to create a packfile for a client, it will
+	run this shell command instead.  The `pack-objects` command and
+	arguments it _would_ have run (including the `git pack-objects`
+	at the beginning) are appended to the shell command. The stdin
+	and stdout of the hook are treated as if `pack-objects` itself
+	was run. I.e., `upload-pack` will feed input intended for
+	`pack-objects` to the hook, and expects a completed packfile on
+	stdout.
++
+Note that this configuration variable is ignored if it is seen in the
+repository-level config (this is a safety measure against fetching from
+untrusted repositories).
+
 url.<base>.insteadOf::
 	Any URL that starts with this value will be rewritten to
 	start, instead, with <base>. In cases where some site serves a
diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt
index 8dd9e4f05..12879e402 100644
--- a/Documentation/git-am.txt
+++ b/Documentation/git-am.txt
@@ -116,7 +116,8 @@ default.   You can use `--no-utf8` to override this.
 	By default the command will try to detect the patch format
 	automatically. This option allows the user to bypass the automatic
 	detection and specify the patch format that the patch(es) should be
-	interpreted as. Valid formats are mbox, stgit, stgit-series and hg.
+	interpreted as. Valid formats are mbox, mboxrd,
+	stgit, stgit-series and hg.
 
 -i::
 --interactive::
diff --git a/Documentation/git-fast-import.txt b/Documentation/git-fast-import.txt
index c105f2121..2b762654b 100644
--- a/Documentation/git-fast-import.txt
+++ b/Documentation/git-fast-import.txt
@@ -136,6 +136,8 @@ Performance and Compression Tuning
 	Maximum size of each output packfile.
 	The default is unlimited.
 
+fastimport.unpackLimit::
+	See linkgit:git-config[1]
 
 Performance
 -----------
diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt
index efe56e080..9e4216999 100644
--- a/Documentation/git-fetch.txt
+++ b/Documentation/git-fetch.txt
@@ -99,6 +99,57 @@ The latter use of the `remote.<repository>.fetch` values can be
 overridden by giving the `--refmap=<refspec>` parameter(s) on the
 command line.
 
+OUTPUT
+------
+
+The output of "git fetch" depends on the transport method used; this
+section describes the output when fetching over the Git protocol
+(either locally or via ssh) and Smart HTTP protocol.
+
+The status of the fetch is output in tabular form, with each line
+representing the status of a single ref. Each line is of the form:
+
+-------------------------------
+ <flag> <summary> <from> -> <to> [<reason>]
+-------------------------------
+
+The status of up-to-date refs is shown only if the --verbose option is
+used.
+
+In compact output mode, specified with configuration variable
+fetch.output, if either entire `<from>` or `<to>` is found in the
+other string, it will be substituted with `*` in the other string. For
+example, `master -> origin/master` becomes `master -> origin/*`.
+
+flag::
+	A single character indicating the status of the ref:
+(space);; for a successfully fetched fast-forward;
+`+`;; for a successful forced update;
+`-`;; for a successfully pruned ref;
+`t`;; for a successful tag update;
+`*`;; for a successfully fetched new ref;
+`!`;; for a ref that was rejected or failed to update; and
+`=`;; for a ref that was up to date and did not need fetching.
+
+summary::
+	For a successfully fetched ref, the summary shows the old and new
+	values of the ref in a form suitable for using as an argument to
+	`git log` (this is `<old>..<new>` in most cases, and
+	`<old>...<new>` for forced non-fast-forward updates).
+
+from::
+	The name of the remote ref being fetched from, minus its
+	`refs/<type>/` prefix. In the case of deletion, the name of
+	the remote ref is "(none)".
+
+to::
+	The name of the local ref being updated, minus its
+	`refs/<type>/` prefix.
+
+reason::
+	A human-readable explanation. In the case of successfully fetched
+	refs, no explanation is needed. For a failed ref, the reason for
+	failure is described.
 
 EXAMPLES
 --------
diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt
index 7fc68eb31..b9f060e3b 100644
--- a/Documentation/git-fsck.txt
+++ b/Documentation/git-fsck.txt
@@ -11,7 +11,8 @@ SYNOPSIS
 [verse]
 'git fsck' [--tags] [--root] [--unreachable] [--cache] [--no-reflogs]
 	 [--[no-]full] [--strict] [--verbose] [--lost-found]
-	 [--[no-]dangling] [--[no-]progress] [--connectivity-only] [<object>*]
+	 [--[no-]dangling] [--[no-]progress] [--connectivity-only]
+	 [--[no-]name-objects] [<object>*]
 
 DESCRIPTION
 -----------
@@ -82,6 +83,12 @@ index file, all SHA-1 references in `refs` namespace, and all reflogs
 	a blob, the contents are written into the file, rather than
 	its object name.
 
+--name-objects::
+	When displaying names of reachable objects, in addition to the
+	SHA-1 also display a name that describes *how* they are reachable,
+	compatible with linkgit:git-rev-parse[1], e.g.
+	`HEAD@{1234567890}~25^2:src/`.
+
 --[no-]progress::
 	Progress status is reported on the standard error stream by
 	default when it is attached to a terminal, unless
diff --git a/Documentation/git-log.txt b/Documentation/git-log.txt
index 4a6c47f84..32246fdb0 100644
--- a/Documentation/git-log.txt
+++ b/Documentation/git-log.txt
@@ -198,6 +198,10 @@ log.showRoot::
 	`git log -p` output would be shown without a diff attached.
 	The default is `true`.
 
+log.showSignature::
+	If `true`, `git log` and related commands will act as if the
+	`--show-signature` option was passed to them.
+
 mailmap.*::
 	See linkgit:git-shortlog[1].
 
diff --git a/Documentation/git-ls-files.txt b/Documentation/git-ls-files.txt
index 078b55666..0d933ac35 100644
--- a/Documentation/git-ls-files.txt
+++ b/Documentation/git-ls-files.txt
@@ -159,8 +159,7 @@ not accessible in the working tree.
 +
 <eolattr> is the attribute that is used when checking out or committing,
 it is either "", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf".
-Note: Currently Git does not support "text=auto eol=lf" or "text=auto eol=crlf",
-that may change in the future.
+Since Git 2.10 "text=auto eol=lf" and "text=auto eol=crlf" are supported.
 +
 Both the <eolinfo> in the index ("i/<eolinfo>")
 and in the working tree ("w/<eolinfo>") are shown for regular files,
diff --git a/Documentation/git-mailsplit.txt b/Documentation/git-mailsplit.txt
index 4d1b871d9..e3b2a88c4 100644
--- a/Documentation/git-mailsplit.txt
+++ b/Documentation/git-mailsplit.txt
@@ -8,7 +8,8 @@ git-mailsplit - Simple UNIX mbox splitter program
 SYNOPSIS
 --------
 [verse]
-'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] -o<directory> [--] [(<mbox>|<Maildir>)...]
+'git mailsplit' [-b] [-f<nn>] [-d<prec>] [--keep-cr] [--mboxrd]
+		-o<directory> [--] [(<mbox>|<Maildir>)...]
 
 DESCRIPTION
 -----------
@@ -47,6 +48,10 @@ OPTIONS
 --keep-cr::
 	Do not remove `\r` from lines ending with `\r\n`.
 
+--mboxrd::
+	Input is of the "mboxrd" format and "^>+From " line escaping is
+	reversed.
+
 GIT
 ---
 Part of the linkgit:git[1] suite
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt
index 927a0341c..47b77e693 100644
--- a/Documentation/git-push.txt
+++ b/Documentation/git-push.txt
@@ -11,7 +11,7 @@ SYNOPSIS
 [verse]
 'git push' [--all | --mirror | --tags] [--follow-tags] [--atomic] [-n | --dry-run] [--receive-pack=<git-receive-pack>]
 	   [--repo=<repository>] [-f | --force] [-d | --delete] [--prune] [-v | --verbose]
-	   [-u | --set-upstream]
+	   [-u | --set-upstream] [--push-option=<string>]
 	   [--[no-]signed|--sign=(true|false|if-asked)]
 	   [--force-with-lease[=<refname>[:<expect>]]]
 	   [--no-verify] [<repository> [<refspec>...]]
@@ -156,6 +156,12 @@ already exists on the remote side.
 	Either all refs are updated, or on error, no refs are updated.
 	If the server does not support atomic pushes the push will fail.
 
+-o::
+--push-option::
+	Transmit the given string to the server, which passes them to
+	the pre-receive as well as the post-receive hook. The given string
+	must not contain a NUL or LF character.
+
 --receive-pack=<git-receive-pack>::
 --exec=<git-receive-pack>::
 	Path to the 'git-receive-pack' program on the remote
diff --git a/Documentation/git-remote-fd.txt b/Documentation/git-remote-fd.txt
index e700bafa4..80afca866 100644
--- a/Documentation/git-remote-fd.txt
+++ b/Documentation/git-remote-fd.txt
@@ -17,7 +17,7 @@ fetch, push or archive.
 
 If only <infd> is given, it is assumed to be a bidirectional socket connected
 to remote Git server (git-upload-pack, git-receive-pack or
-git-upload-achive). If both <infd> and <outfd> are given, they are assumed
+git-upload-archive). If both <infd> and <outfd> are given, they are assumed
 to be pipes connected to a remote Git server (<infd> being the inbound pipe
 and <outfd> being the outbound pipe.
 
diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt
index 9597777ad..26afe6ed5 100644
--- a/Documentation/git-repack.txt
+++ b/Documentation/git-repack.txt
@@ -130,6 +130,19 @@ other objects in that pack they already have locally.
 	with `-b` or `repack.writeBitmaps`, as it ensures that the
 	bitmapped packfile has the necessary objects.
 
+--unpack-unreachable=<when>::
+	When loosening unreachable objects, do not bother loosening any
+	objects older than `<when>`. This can be used to optimize out
+	the write of any objects that would be immediately pruned by
+	a follow-up `git prune`.
+
+-k::
+--keep-unreachable::
+	When used with `-ad`, any unreachable objects from existing
+	packs will be appended to the end of the packfile instead of
+	being removed. In addition, any unreachable loose objects will
+	be packed (and their loose counterparts removed).
+
 Configuration
 -------------
 
diff --git a/Documentation/git-submodule.txt b/Documentation/git-submodule.txt
index 9226c4380..bf3bb372e 100644
--- a/Documentation/git-submodule.txt
+++ b/Documentation/git-submodule.txt
@@ -15,8 +15,9 @@ SYNOPSIS
 'git submodule' [--quiet] init [--] [<path>...]
 'git submodule' [--quiet] deinit [-f|--force] (--all|[--] <path>...)
 'git submodule' [--quiet] update [--init] [--remote] [-N|--no-fetch]
-	      [-f|--force] [--rebase|--merge] [--reference <repository>]
-	      [--depth <depth>] [--recursive] [--jobs <n>] [--] [<path>...]
+	      [--[no-]recommend-shallow] [-f|--force] [--rebase|--merge]
+	      [--reference <repository>] [--depth <depth>] [--recursive]
+	      [--jobs <n>] [--] [<path>...]
 'git submodule' [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>]
 	      [commit] [--] [<path>...]
 'git submodule' [--quiet] foreach [--recursive] <command>
@@ -384,6 +385,12 @@ for linkgit:git-clone[1]'s `--reference` and `--shared` options carefully.
 	clone with a history truncated to the specified number of revisions.
 	See linkgit:git-clone[1]
 
+--[no-]recommend-shallow::
+	This option is only valid for the update command.
+	The initial clone of a submodule will use the recommended
+	`submodule.<name>.shallow` as provided by the .gitmodules file
+	by default. To ignore the suggestions use `--no-recommend-shallow`.
+
 -j <n>::
 --jobs <n>::
 	This option is only valid for the update command.
diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt
index 7e17cade7..5f9e65b0c 100644
--- a/Documentation/git-svn.txt
+++ b/Documentation/git-svn.txt
@@ -625,6 +625,9 @@ config key: svn.authorsfile
 	with the committer name as the first argument.  The program is
 	expected to return a single line of the form "Name <email>",
 	which will be treated as if included in the authors file.
++
+[verse]
+config key: svn.authorsProg
 
 -q::
 --quiet::
diff --git a/Documentation/git-upload-pack.txt b/Documentation/git-upload-pack.txt
index 0abc806ea..822ad593a 100644
--- a/Documentation/git-upload-pack.txt
+++ b/Documentation/git-upload-pack.txt
@@ -9,8 +9,8 @@ git-upload-pack - Send objects packed back to git-fetch-pack
 SYNOPSIS
 --------
 [verse]
-'git-upload-pack' [--strict] [--timeout=<n>] <directory>
-
+'git-upload-pack' [--[no-]strict] [--timeout=<n>] [--stateless-rpc]
+		  [--advertise-refs] <directory>
 DESCRIPTION
 -----------
 Invoked by 'git fetch-pack', learns what
@@ -25,12 +25,22 @@ repository.  For push operations, see 'git send-pack'.
 OPTIONS
 -------
 
---strict::
+--[no-]strict::
 	Do not try <directory>/.git/ if <directory> is no Git directory.
 
 --timeout=<n>::
 	Interrupt transfer after <n> seconds of inactivity.
 
+--stateless-rpc::
+	Perform only a single read-write cycle with stdin and stdout.
+	This fits with the HTTP POST request processing model where
+	a program may read the request, write a response, and must exit.
+
+--advertise-refs::
+	Only the initial ref advertisement is output, and the program exits
+	immediately. This fits with the HTTP GET request model, where
+	no request content is received but a response must be produced.
+
 <directory>::
 	The repository to sync from.
 
diff --git a/Documentation/git-worktree.txt b/Documentation/git-worktree.txt
index c62234538..0aeb020d0 100644
--- a/Documentation/git-worktree.txt
+++ b/Documentation/git-worktree.txt
@@ -10,8 +10,10 @@ SYNOPSIS
 --------
 [verse]
 'git worktree add' [-f] [--detach] [--checkout] [-b <new-branch>] <path> [<branch>]
-'git worktree prune' [-n] [-v] [--expire <expire>]
 'git worktree list' [--porcelain]
+'git worktree lock' [--reason <string>] <worktree>
+'git worktree prune' [-n] [-v] [--expire <expire>]
+'git worktree unlock' <worktree>
 
 DESCRIPTION
 -----------
@@ -38,9 +40,8 @@ section "DETAILS" for more information.
 
 If a linked working tree is stored on a portable device or network share
 which is not always mounted, you can prevent its administrative files from
-being pruned by creating a file named 'locked' alongside the other
-administrative files, optionally containing a plain text reason that
-pruning should be suppressed. See section "DETAILS" for more information.
+being pruned by issuing the `git worktree lock` command, optionally
+specifying `--reason` to explain why the working tree is locked.
 
 COMMANDS
 --------
@@ -48,16 +49,13 @@ add <path> [<branch>]::
 
 Create `<path>` and checkout `<branch>` into it. The new working directory
 is linked to the current repository, sharing everything except working
-directory specific files such as HEAD, index, etc.
+directory specific files such as HEAD, index, etc. `-` may also be
+specified as `<branch>`; it is synonymous with `@{-1}`.
 +
 If `<branch>` is omitted and neither `-b` nor `-B` nor `--detached` used,
 then, as a convenience, a new branch based at HEAD is created automatically,
 as if `-b $(basename <path>)` was specified.
 
-prune::
-
-Prune working tree information in $GIT_DIR/worktrees.
-
 list::
 
 List details of each worktree.  The main worktree is listed first, followed by
@@ -65,6 +63,22 @@ each of the linked worktrees.  The output details include if the worktree is
 bare, the revision currently checked out, and the branch currently checked out
 (or 'detached HEAD' if none).
 
+lock::
+
+If a working tree is on a portable device or network share which
+is not always mounted, lock it to prevent its administrative
+files from being pruned automatically. This also prevents it from
+being moved or deleted. Optionally, specify a reason for the lock
+with `--reason`.
+
+prune::
+
+Prune working tree information in $GIT_DIR/worktrees.
+
+unlock::
+
+Unlock a working tree, allowing it to be pruned, moved or deleted.
+
 OPTIONS
 -------
 
@@ -110,6 +124,18 @@ OPTIONS
 --expire <time>::
 	With `prune`, only expire unused working trees older than <time>.
 
+--reason <string>::
+	With `lock`, an explanation why the working tree is locked.
+
+<worktree>::
+	Working trees can be identified by path, either relative or
+	absolute.
++
+If the last path components in the working tree's path is unique among
+working trees, it can be used to identify worktrees. For example if
+you only have to working trees at "/abc/def/ghi" and "/abc/def/ggg",
+then "ghi" or "def/ghi" is enough to point to the former working tree.
+
 DETAILS
 -------
 Each linked working tree has a private sub-directory in the repository's
@@ -150,7 +176,8 @@ instead.
 
 To prevent a $GIT_DIR/worktrees entry from being pruned (which
 can be useful in some situations, such as when the
-entry's working tree is stored on a portable device), add a file named
+entry's working tree is stored on a portable device), use the
+`git worktree lock` command, which adds a file named
 'locked' to the entry's directory. The file contains the reason in
 plain text. For example, if a linked working tree's `.git` file points
 to `/path/main/.git/worktrees/test-next` then a file named
@@ -226,8 +253,6 @@ performed manually, such as:
 - `remove` to remove a linked working tree and its administrative files (and
   warn if the working tree is dirty)
 - `mv` to move or rename a working tree and update its administrative files
-- `lock` to prevent automatic pruning of administrative files (for instance,
-  for a working tree on a portable device)
 
 GIT
 ---
diff --git a/Documentation/git.txt b/Documentation/git.txt
index 923aa49db..7913fc251 100644
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -43,6 +43,11 @@ unreleased) version of Git, that is available from the 'master'
 branch of the `git.git` repository.
 Documentation for older releases are available here:
 
+* link:v2.10.0/git.html[documentation for release 2.10]
+
+* release notes for
+  link:RelNotes/2.10.0.txt[2.10].
+
 * link:v2.9.3/git.html[documentation for release 2.9.3]
 
 * release notes for
@@ -1086,6 +1091,14 @@ of clones and fetches.
 	cloning of shallow repositories.
 	See `GIT_TRACE` for available trace output options.
 
+`GIT_TRACE_CURL`::
+	Enables a curl full trace dump of all incoming and outgoing data,
+	including descriptive information, of the git transport protocol.
+	This is similar to doing curl `--trace-ascii` on the command line.
+	This option overrides setting the `GIT_CURL_VERBOSE` environment
+	variable.
+	See `GIT_TRACE` for available trace output options.
+
 `GIT_LITERAL_PATHSPECS`::
 	Setting this variable to `1` will cause Git to treat all
 	pathspecs literally, rather than as glob patterns. For example,
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt
index 6d20400e7..7aff94020 100644
--- a/Documentation/gitattributes.txt
+++ b/Documentation/gitattributes.txt
@@ -133,7 +133,7 @@ Set to string value "auto"::
 	When `text` is set to "auto", the path is marked for automatic
 	end-of-line conversion.  If Git decides that the content is
 	text, its line endings are converted to LF on checkin.
-	When the file has been commited with CRLF, no conversion is done.
+	When the file has been committed with CRLF, no conversion is done.
 
 Unspecified::
 
@@ -182,23 +182,6 @@ While Git normally leaves file contents alone, it can be configured to
 normalize line endings to LF in the repository and, optionally, to
 convert them to CRLF when files are checked out.
 
-Here is an example that will make Git normalize .txt, .vcproj and .sh
-files, ensure that .vcproj files have CRLF and .sh files have LF in
-the working directory, and prevent .jpg files from being normalized
-regardless of their content.
-
-------------------------
-*               text=auto
-*.txt		text
-*.vcproj	text eol=crlf
-*.sh		text eol=lf
-*.jpg		-text
-------------------------
-
-Other source code management systems normalize all text files in their
-repositories, and there are two ways to enable similar automatic
-normalization in Git.
-
 If you simply want to have CRLF line endings in your working directory
 regardless of the repository you are working with, you can set the
 config variable "core.autocrlf" without using any attributes.
@@ -208,35 +191,42 @@ config variable "core.autocrlf" without using any attributes.
 	autocrlf = true
 ------------------------
 
-This does not force normalization of all text files, but does ensure
+This does not force normalization of text files, but does ensure
 that text files that you introduce to the repository have their line
 endings normalized to LF when they are added, and that files that are
 already normalized in the repository stay normalized.
 
-If you want to interoperate with a source code management system that
-enforces end-of-line normalization, or you simply want all text files
-in your repository to be normalized, you should instead set the `text`
-attribute to "auto" for _all_ files.
+If you want to ensure that text files that any contributor introduces to
+the repository have their line endings normalized, you can set the
+`text` attribute to "auto" for _all_ files.
 
 ------------------------
 *	text=auto
 ------------------------
 
-This ensures that all files that Git considers to be text will have
-normalized (LF) line endings in the repository.  The `core.eol`
-configuration variable controls which line endings Git will use for
-normalized files in your working directory; the default is to use the
-native line ending for your platform, or CRLF if `core.autocrlf` is
-set.
+The attributes allow a fine-grained control, how the line endings
+are converted.
+Here is an example that will make Git normalize .txt, .vcproj and .sh
+files, ensure that .vcproj files have CRLF and .sh files have LF in
+the working directory, and prevent .jpg files from being normalized
+regardless of their content.
+
+------------------------
+*               text=auto
+*.txt		text
+*.vcproj	text eol=crlf
+*.sh		text eol=lf
+*.jpg		-text
+------------------------
+
+NOTE: When `text=auto` conversion is enabled in a cross-platform
+project using push and pull to a central repository the text files
+containing CRLFs should be normalized.
 
-NOTE: When `text=auto` normalization is enabled in an existing
-repository, any text files containing CRLFs should be normalized.  If
-they are not they will be normalized the next time someone tries to
-change them, causing unfortunate misattribution.  From a clean working
-directory:
+From a clean working directory:
 
 -------------------------------------------------
-$ echo "* text=auto" >>.gitattributes
+$ echo "* text=auto" >.gitattributes
 $ rm .git/index     # Remove the index to force Git to
 $ git reset         # re-scan the working directory
 $ git status        # Show files that will be normalized
@@ -533,6 +523,8 @@ patterns are available:
 
 - `csharp` suitable for source code in the C# language.
 
+- `css` suitable for cascading style sheets.
+
 - `fortran` suitable for source code in the Fortran language.
 
 - `fountain` suitable for Fountain documents.
diff --git a/Documentation/githooks.txt b/Documentation/githooks.txt
index d82e912e5..9565dc3fd 100644
--- a/Documentation/githooks.txt
+++ b/Documentation/githooks.txt
@@ -247,6 +247,15 @@ Both standard output and standard error output are forwarded to
 'git send-pack' on the other end, so you can simply `echo` messages
 for the user.
 
+The number of push options given on the command line of
+`git push --push-option=...` can be read from the environment
+variable `GIT_PUSH_OPTION_COUNT`, and the options themselves are
+found in `GIT_PUSH_OPTION_0`, `GIT_PUSH_OPTION_1`,...
+If it is negotiated to not use the push options phase, the
+environment variables will not be set. If the client selects
+to use push options, but doesn't transmit any, the count variable
+will be set to zero, `GIT_PUSH_OPTION_COUNT=0`.
+
 [[update]]
 update
 ~~~~~~
@@ -322,6 +331,15 @@ a sample script `post-receive-email` provided in the `contrib/hooks`
 directory in Git distribution, which implements sending commit
 emails.
 
+The number of push options given on the command line of
+`git push --push-option=...` can be read from the environment
+variable `GIT_PUSH_OPTION_COUNT`, and the options themselves are
+found in `GIT_PUSH_OPTION_0`, `GIT_PUSH_OPTION_1`,...
+If it is negotiated to not use the push options phase, the
+environment variables will not be set. If the client selects
+to use push options, but doesn't transmit any, the count variable
+will be set to zero, `GIT_PUSH_OPTION_COUNT=0`.
+
 [[post-update]]
 post-update
 ~~~~~~~~~~~
diff --git a/Documentation/gitmodules.txt b/Documentation/gitmodules.txt
index 07cdd73ab..10dcc08ff 100644
--- a/Documentation/gitmodules.txt
+++ b/Documentation/gitmodules.txt
@@ -79,6 +79,11 @@ submodule.<name>.ignore::
 	"--ignore-submodule" option. The 'git submodule' commands are not
 	affected by this setting.
 
+submodule.<name>.shallow::
+	When set to true, a clone of this submodule will be performed as a
+	shallow clone unless the user explicitly asks for a non-shallow
+	clone.
+
 
 EXAMPLES
 --------
diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt
index eac982cd6..a779c9dfe 100644
--- a/Documentation/rev-list-options.txt
+++ b/Documentation/rev-list-options.txt
@@ -289,6 +289,10 @@ ifdef::git-rev-list[]
 	Try to speed up the traversal using the pack bitmap index (if
 	one is available). Note that when traversing with `--objects`,
 	trees and blobs will not have their associated path printed.
+
+--progress=<header>::
+	Show progress reports on stderr as objects are considered. The
+	`<header>` text will be printed with each progress update.
 endif::git-rev-list[]
 
 --
diff --git a/Documentation/technical/pack-protocol.txt b/Documentation/technical/pack-protocol.txt
index d40ab6549..736f3894a 100644
--- a/Documentation/technical/pack-protocol.txt
+++ b/Documentation/technical/pack-protocol.txt
@@ -454,7 +454,8 @@ The reference discovery phase is done nearly the same way as it is in the
 fetching protocol. Each reference obj-id and name on the server is sent
 in packet-line format to the client, followed by a flush-pkt.  The only
 real difference is that the capability listing is different - the only
-possible values are 'report-status', 'delete-refs' and 'ofs-delta'.
+possible values are 'report-status', 'delete-refs', 'ofs-delta' and
+'push-options'.
 
 Reference Update Request and Packfile Transfer
 ----------------------------------------------
@@ -465,9 +466,10 @@ that it wants to update, it sends a line listing the obj-id currently on
 the server, the obj-id the client would like to update it to and the name
 of the reference.
 
-This list is followed by a flush-pkt and then the packfile that should
-contain all the objects that the server will need to complete the new
-references.
+This list is followed by a flush-pkt. Then the push options are transmitted
+one per packet followed by another flush-pkt. After that the packfile that
+should contain all the objects that the server will need to complete the new
+references will be sent.
 
 ----
   update-request    =  *shallow ( command-list | push-cert ) [packfile]
diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt
index eaab6b4ac..4c28d3a8a 100644
--- a/Documentation/technical/protocol-capabilities.txt
+++ b/Documentation/technical/protocol-capabilities.txt
@@ -253,6 +253,15 @@ atomic pushes. If the pushing client requests this capability, the server
 will update the refs in one atomic transaction. Either all refs are
 updated or none.
 
+push-options
+------------
+
+If the server sends the 'push-options' capability it is able to accept
+push options after the update commands have been sent, but before the
+packfile is streamed. If the pushing client requests this capability,
+the server will pass the options to the pre- and post- receive hooks
+that process this push request.
+
 allow-tip-sha1-in-want
 ----------------------