19 files changed, 326 insertions, 86 deletions
diff --git a/Documentation/RelNotes-1.6.5.1.txt b/Documentation/RelNotes-1.6.5.1.txt
new file mode 100644
index 000000000..309ba181b
--- /dev/null
+++ b/Documentation/RelNotes-1.6.5.1.txt
@@ -0,0 +1,20 @@
+GIT v1.6.5.1 Release Notes
+==========================
+
+Fixes since v1.6.5
+------------------
+
+ * An corrupt pack could make codepath to read objects into an
+   infinite loop.
+
+ * Download throughput display was always shown in KiB/s but on fast links
+   it is more appropriate to show it in MiB/s.
+
+ * "git grep -f filename" used uninitialized variable and segfaulted.
+
+ * "git clone -b branch" gave a wrong commit object name to post-checkout
+   hook.
+
+ * "git pull" over http did not work on msys.
+
+Other minor documentation updates are included.
diff --git a/Documentation/RelNotes-1.6.5.2.txt b/Documentation/RelNotes-1.6.5.2.txt
new file mode 100644
index 000000000..aa7ccce3a
--- /dev/null
+++ b/Documentation/RelNotes-1.6.5.2.txt
@@ -0,0 +1,19 @@
+GIT v1.6.5.2 Release Notes
+==========================
+
+Fixes since v1.6.5.1
+--------------------
+
+ * Installation of templates triggered a bug in busybox when using tar
+   implementation from it.
+
+ * "git add -i" incorrectly ignored paths that are already in the index
+   if they matched .gitignore patterns.
+
+ * "git describe --always" should have produced some output even there
+   were no tags in the repository, but it didn't.
+
+ * "git ls-files" when showing tracked files incorrectly paid attention
+   to the exclude patterns.
+
+Other minor documentation updates are included.
diff --git a/Documentation/RelNotes-1.6.6.txt b/Documentation/RelNotes-1.6.6.txt
new file mode 100644
index 000000000..abf34e6ac
--- /dev/null
+++ b/Documentation/RelNotes-1.6.6.txt
@@ -0,0 +1,108 @@
+GIT v1.6.6 Release Notes
+========================
+
+In this release, "git fsck" defaults to "git fsck --full" and checks
+packfiles, and because of this it will take much longer to complete
+than before.  If you prefer a quicker check only on loose objects (the
+old default), you can say "git fsck --no-full".  This has been
+supported by 1.5.4 and newer versions of git, so it is safe to write
+it in your script even if you use slightly older git on some of your
+machines.
+
+In git 1.7.0, which is planned to be the release after 1.6.6, "git
+push" into a branch that is currently checked out will be refused by
+default.
+
+You can choose what should happen upon such a push by setting the
+configuration variable receive.denyCurrentBranch in the receiving
+repository.
+
+Also, "git push $there :$killed" to delete the branch $killed in a remote
+repository $there, when $killed branch is the current branch pointed at by
+its HEAD, will be refused by default.
+
+You can choose what should happen upon such a push by setting the
+configuration variable receive.denyDeleteCurrent in the receiving
+repository.
+
+To ease the transition plan, the receiving repository of such a
+push running this release will issue a big warning when the
+configuration variable is missing.  Please refer to:
+
+  http://git.or.cz/gitwiki/GitFaq#non-bare
+  http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007
+
+for more details on the reason why this change is needed and the
+transition plan.
+
+Updates since v1.6.5
+--------------------
+
+(subsystems)
+
+(portability)
+
+(performance)
+
+(usability, bells and whistles)
+
+ * The object replace mechanism can be bypassed with --no-replace-objects
+   global option given to the "git" program.
+
+ * "git fsck" by default checks the packfiles (i.e. "--full" is the
+   default); you can turn it off with "git fsck --no-full".
+
+ * import-tars contributed fast-import frontend learned more types of
+   compressed tarballs.
+
+ * "git instaweb" knows how to talk with mod_cgid to apache2.
+
+ * "git log --decorate" shows the location of HEAD as well.
+
+ * "git rebase -i" learned "reword" that acts like "edit" but immediately
+   starts an editor to tweak the log message without returning control to
+   the shell, which is done by "edit" to give an opportunity to tweak the
+   contents.
+
+ * Author names shown in gitweb output are links to search commits by the
+   author.
+
+
+(developers)
+
+Fixes since v1.6.5
+------------------
+
+All of the fixes in v1.6.5.X maintenance series are included in this
+release, unless otherwise noted.
+
+ * "git apply" and "git diff" (including patch output from "git log -p")
+   now flags trailing blank lines as whitespace errors correctly (only
+   "apply --whitespace=fix" stripped them but "apply --whitespace=warn"
+   did not even warn).
+
+ * Two whitespace error classes, 'blank-at-eof' and 'blank-at-eol', have
+   been introduced (settable by core.whitespace configuration variable and
+   whitespace attribute).  The 'trailing-space' whitespace error class has
+   become a short-hand to cover both of these and there is no behaviour
+   change for existing set-ups.
+
+ * "git cvsimport" did not work well when it is fed filenames from the
+   command line and is not started at the top of the work tree.  We should
+   backport this by merging f6fdbb6 (cvsimport: fix relative argument
+   filenames, 2009-10-19).
+
+ * The way gitweb escapes its CGI parameters were broken especially when
+   the parameter was a UTF-8 string.  We may want to backport this to
+   1.6.5.X series by merging 452e225 (gitweb: fix esc_param, 2009-10-13).
+
+ * gitweb used to show 'patch' link for merge commits but the output from
+   it is not usable to feed "git am" with.  We may want to backport this
+   to 1.6.5.X series by merging 1655c98 (gitweb: Do not show 'patch' link
+   for merge commits, 2009-10-09).
+
+---
+exec >/var/tmp/1
+echo O=$(git describe master)
+O=v1.6.5.2-73-g9b12444
+git shortlog --no-merges $O..master --not maint
diff --git a/Documentation/config.txt b/Documentation/config.txt
index cd1781498..d1e2120e1 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -416,13 +416,17 @@ core.whitespace::
 	consider them as errors.  You can prefix `-` to disable
 	any of them (e.g. `-trailing-space`):
 +
-* `trailing-space` treats trailing whitespaces at the end of the line
+* `blank-at-eol` treats trailing whitespaces at the end of the line
   as an error (enabled by default).
 * `space-before-tab` treats a space character that appears immediately
   before a tab character in the initial indent part of the line as an
   error (enabled by default).
 * `indent-with-non-tab` treats a line that is indented with 8 or more
   space characters as an error (not enabled by default).
+* `blank-at-eof` treats blank lines added at the end of file as an error
+  (enabled by default).
+* `trailing-space` is a short-hand to cover both `blank-at-eol` and
+  `blank-at-eof`.
 * `cr-at-eol` treats a carriage-return at the end of line as
   part of the line terminator, i.e. with it, `trailing-space`
   does not trigger if the character before such a carriage-return
@@ -1320,6 +1324,11 @@ rebase.stat::
 	Whether to show a diffstat of what changed upstream since the last
 	rebase. False by default.
 
+receive.autogc::
+	By default, git-receive-pack will run "git-gc --auto" after
+	receiving data from git-push and updating refs.  You can stop
+	it by setting this variable to false.
+
 receive.fsckObjects::
 	If it is set to true, git-receive-pack will check all received
 	objects. It will abort in the case of a malformed object or a
@@ -1355,6 +1364,10 @@ receive.denyNonFastForwards::
 	even if that push is forced. This configuration variable is
 	set when initializing a shared repository.
 
+receive.updateserverinfo::
+	If set to true, git-receive-pack will run git-update-server-info
+	after receiving data from git-push and updating refs.
+
 remote.<name>.url::
 	The URL of a remote repository.  See linkgit:git-fetch[1] or
 	linkgit:git-push[1].
diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt
index 0b7982ea7..e9b3b40af 100644
--- a/Documentation/git-check-ref-format.txt
+++ b/Documentation/git-check-ref-format.txt
@@ -9,7 +9,7 @@ SYNOPSIS
 --------
 [verse]
 'git check-ref-format' <refname>
-'git check-ref-format' [--branch] <branchname-shorthand>
+'git check-ref-format' --branch <branchname-shorthand>
 
 DESCRIPTION
 -----------
@@ -63,8 +63,11 @@ reference name expressions (see linkgit:git-rev-parse[1]):
 
 . at-open-brace `@{` is used as a notation to access a reflog entry.
 
-With the `--branch` option, it expands a branch name shorthand and
-prints the name of the branch the shorthand refers to.
+With the `--branch` option, it expands the ``previous branch syntax''
+`@{-n}`.  For example, `@{-1}` is a way to refer the last branch you
+were on.  This option should be used by porcelains to accept this
+syntax anywhere a branch name is expected, so they can act as if you
+typed the branch name.
 
 EXAMPLE
 -------
diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt
index 5ebcba1c7..7e7d9fcf5 100644
--- a/Documentation/git-clone.txt
+++ b/Documentation/git-clone.txt
@@ -39,7 +39,7 @@ OPTIONS
 --local::
 -l::
 	When the repository to clone from is on a local machine,
-	this flag bypasses normal "git aware" transport
+	this flag bypasses the normal "git aware" transport
 	mechanism and clones the repository by making a copy of
 	HEAD and everything under objects and refs directories.
 	The files under `.git/objects/` directory are hardlinked
@@ -60,7 +60,7 @@ OPTIONS
 -s::
 	When the repository to clone is on the local machine,
 	instead of using hard links, automatically setup
-	.git/objects/info/alternates to share the objects
+	`.git/objects/info/alternates` to share the objects
 	with the source repository.  The resulting repository
 	starts out without any object of its own.
 +
@@ -69,7 +69,7 @@ it unless you understand what it does. If you clone your
 repository using this option and then delete branches (or use any
 other git command that makes any existing commit unreferenced) in the
 source repository, some objects may become unreferenced (or dangling).
-These objects may be removed by normal git operations (such as 'git-commit')
+These objects may be removed by normal git operations (such as `git commit`)
 which automatically call `git gc --auto`. (See linkgit:git-gc[1].)
 If these objects are removed and were referenced by the cloned repository,
 then the cloned repository will become corrupt.
@@ -86,13 +86,13 @@ objects from the source repository into a pack in the cloned repository.
 
 --reference <repository>::
 	If the reference repository is on the local machine,
-	automatically setup .git/objects/info/alternates to
+	automatically setup `.git/objects/info/alternates` to
 	obtain objects from the reference repository.  Using
 	an already existing repository as an alternate will
 	require fewer objects to be copied from the repository
 	being cloned, reducing network and local storage costs.
 +
-*NOTE*: see NOTE to --shared option.
+*NOTE*: see the NOTE for the `--shared` option.
 
 --quiet::
 -q::
@@ -101,7 +101,7 @@ objects from the source repository into a pack in the cloned repository.
 
 --verbose::
 -v::
-	Display the progressbar, even in case the standard output is not
+	Display the progress bar, even in case the standard output is not
 	a terminal.
 
 --no-checkout::
@@ -121,17 +121,17 @@ objects from the source repository into a pack in the cloned repository.
 	configuration variables are created.
 
 --mirror::
-	Set up a mirror of the remote repository.  This implies --bare.
+	Set up a mirror of the remote repository.  This implies `--bare`.
 
 --origin <name>::
 -o <name>::
-	Instead of using the remote name 'origin' to keep track
-	of the upstream repository, use <name>.
+	Instead of using the remote name `origin` to keep track
+	of the upstream repository, use `<name>`.
 
 --branch <name>::
 -b <name>::
 	Instead of pointing the newly created HEAD to the branch pointed
-	to by the cloned repository's HEAD, point to <name> branch
+	to by the cloned repository's HEAD, point to `<name>` branch
 	instead. In a non-bare repository, this is the branch that will
 	be checked out.
 
@@ -158,7 +158,7 @@ objects from the source repository into a pack in the cloned repository.
 --recursive::
 	After the clone is created, initialize all submodules within,
 	using their default settings. This is equivalent to running
-	'git submodule update --init --recursive' immediately after
+	`git submodule update --init --recursive` immediately after
 	the clone is finished. This option is ignored if the cloned
 	repository does not have a worktree/checkout (i.e. if any of
 	`--no-checkout`/`-n`, `--bare`, or `--mirror` is given)
@@ -171,8 +171,8 @@ objects from the source repository into a pack in the cloned repository.
 <directory>::
 	The name of a new directory to clone into.  The "humanish"
 	part of the source repository is used if no directory is
-	explicitly given ("repo" for "/path/to/repo.git" and "foo"
-	for "host.xz:foo/.git").  Cloning into an existing directory
+	explicitly given (`repo` for `/path/to/repo.git` and `foo`
+	for `host.xz:foo/.git`).  Cloning into an existing directory
 	is only allowed if the directory is empty.
 
 :git-clone: 1
diff --git a/Documentation/git-describe.txt b/Documentation/git-describe.txt
index b231dbb94..e9dbca7d8 100644
--- a/Documentation/git-describe.txt
+++ b/Documentation/git-describe.txt
@@ -44,7 +44,9 @@ OPTIONS
 
 --abbrev=<n>::
 	Instead of using the default 7 hexadecimal digits as the
-	abbreviated object name, use <n> digits.
+	abbreviated object name, use <n> digits, or as many digits
+	as needed to form a unique object name.  An <n> of 0
+	will suppress long format, only showing the closest tag.
 
 --candidates=<n>::
 	Instead of considering only the 10 most recent tags as
@@ -68,8 +70,8 @@ OPTIONS
 	This is useful when you want to see parts of the commit object name
 	in "describe" output, even when the commit in question happens to be
 	a tagged version.  Instead of just emitting the tag name, it will
-	describe such a commit as v1.2-0-deadbeef (0th commit since tag v1.2
-	that points at object deadbeef....).
+	describe such a commit as v1.2-0-gdeadbee (0th commit since tag v1.2
+	that points at object deadbee....).
 
 --match <pattern>::
 	Only consider tags matching the given pattern (can be used to avoid
@@ -108,7 +110,7 @@ the output shows the reference path as well:
 	[torvalds@g5 git]$ git describe --all --abbrev=4 v1.0.5^2
 	tags/v1.0.0-21-g975b
 
-	[torvalds@g5 git]$ git describe --all HEAD^
+	[torvalds@g5 git]$ git describe --all --abbrev=4 HEAD^
 	heads/lt/describe-7-g975b
 
 With --abbrev set to 0, the command can be used to find the
@@ -117,6 +119,13 @@ closest tagname without any suffix:
 	[torvalds@g5 git]$ git describe --abbrev=0 v1.0.5^2
 	tags/v1.0.0
 
+Note that the suffix you get if you type these commands today may be
+longer than what Linus saw above when he ran this command, as your
+git repository may have new commits whose object names begin with
+975b that did not exist back then, and "-g975b" suffix alone may not
+be sufficient to disambiguate these commits.
+
+
 SEARCH STRATEGY
 ---------------
 
diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt
index d3164c5c8..f2483d624 100644
--- a/Documentation/git-fetch.txt
+++ b/Documentation/git-fetch.txt
@@ -37,6 +37,35 @@ include::pull-fetch-param.txt[]
 
 include::urls-remotes.txt[]
 
+
+EXAMPLES
+--------
+
+* Update the remote-tracking branches:
++
+------------------------------------------------
+$ git fetch origin
+------------------------------------------------
++
+The above command copies all branches from the remote refs/heads/
+namespace and stores them to the local refs/remotes/origin/ namespace,
+unless the branch.<name>.fetch option is used to specify a non-default
+refspec.
+
+* Using refspecs explicitly:
++
+------------------------------------------------
+$ git fetch origin +pu:pu maint:tmp
+------------------------------------------------
++
+This updates (or creates, as necessary) branches `pu` and `tmp` in
+the local repository by fetching from the branches (respectively)
+`pu` and `maint` from the remote repository.
++
+The `pu` branch will be updated even if it is does not fast-forward,
+because it is prefixed with a plus sign; `tmp` will not be.
+
+
 SEE ALSO
 --------
 linkgit:git-pull[1]
diff --git a/Documentation/git-fsck.txt b/Documentation/git-fsck.txt
index 287c4fc5e..6fe9484da 100644
--- a/Documentation/git-fsck.txt
+++ b/Documentation/git-fsck.txt
@@ -10,7 +10,7 @@ SYNOPSIS
 --------
 [verse]
 'git fsck' [--tags] [--root] [--unreachable] [--cache] [--no-reflogs]
-	 [--full] [--strict] [--verbose] [--lost-found] [<object>*]
+	 [--[no-]full] [--strict] [--verbose] [--lost-found] [<object>*]
 
 DESCRIPTION
 -----------
@@ -52,7 +52,8 @@ index file, all SHA1 references in .git/refs/*, and all reflogs (unless
 	or $GIT_DIR/objects/info/alternates,
 	and in packed git archives found in $GIT_DIR/objects/pack
 	and corresponding pack subdirectories in alternate
-	object pools.
+	object pools.  This is now default; you can turn it off
+	with --no-full.
 
 --strict::
 	Enable more strict checking, namely to catch a file mode
diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt
index 1f6df6ad6..4cd9cdf90 100644
--- a/Documentation/git-gc.txt
+++ b/Documentation/git-gc.txt
@@ -120,7 +120,7 @@ Notes
 particular, it will keep not only objects referenced by your current set
 of branches and tags, but also objects referenced by the index, remote
 tracking branches, refs saved by 'git-filter-branch' in
-refs/original/, or reflogs (which may references commits in branches
+refs/original/, or reflogs (which may reference commits in branches
 that were later amended or rewound).
 
 If you are expecting some objects to be collected and they aren't, check
diff --git a/Documentation/git-merge.txt b/Documentation/git-merge.txt
index d05f32446..e886c2ef5 100644
--- a/Documentation/git-merge.txt
+++ b/Documentation/git-merge.txt
@@ -212,6 +212,39 @@ You can work through the conflict with a number of tools:
    common ancestor, 'git show :2:filename' shows the HEAD
    version and 'git show :3:filename' shows the remote version.
 
+
+EXAMPLES
+--------
+
+* Merge branches `fixes` and `enhancements` on top of
+  the current branch, making an octopus merge:
++
+------------------------------------------------
+$ git merge fixes enhancements
+------------------------------------------------
+
+* Merge branch `obsolete` into the current branch, using `ours`
+  merge strategy:
++
+------------------------------------------------
+$ git merge -s ours obsolete
+------------------------------------------------
+
+* Merge branch `maint` into the current branch, but do not make
+  a new commit automatically:
++
+------------------------------------------------
+$ git merge --no-commit maint
+------------------------------------------------
++
+This can be used when you want to include further changes to the
+merge, or want to write your own merge commit message.
++
+You should refrain from abusing this option to sneak substantial
+changes into a merge commit.  Small fixups like bumping
+release/version name would be acceptable.
+
+
 SEE ALSO
 --------
 linkgit:git-fmt-merge-msg[1], linkgit:git-pull[1],
diff --git a/Documentation/git-pull.txt b/Documentation/git-pull.txt
index 51534dd84..b93201158 100644
--- a/Documentation/git-pull.txt
+++ b/Documentation/git-pull.txt
@@ -138,54 +138,13 @@ $ git pull origin next
 ------------------------------------------------
 +
 This leaves a copy of `next` temporarily in FETCH_HEAD, but
-does not update any remote-tracking branches.
-
-* Bundle local branch `fixes` and `enhancements` on top of
-  the current branch, making an Octopus merge:
-+
-------------------------------------------------
-$ git pull . fixes enhancements
-------------------------------------------------
-+
-This `git pull .` syntax is equivalent to `git merge`.
-
-* Merge local branch `obsolete` into the current branch, using `ours`
-  merge strategy:
-+
-------------------------------------------------
-$ git pull -s ours . obsolete
-------------------------------------------------
-
-* Merge local branch `maint` into the current branch, but do not make
-  a commit automatically:
+does not update any remote-tracking branches. Using remote-tracking
+branches, the same can be done by invoking fetch and merge:
 +
 ------------------------------------------------
-$ git pull --no-commit . maint
+$ git fetch origin
+$ git merge origin/next
 ------------------------------------------------
-+
-This can be used when you want to include further changes to the
-merge, or want to write your own merge commit message.
-+
-You should refrain from abusing this option to sneak substantial
-changes into a merge commit.  Small fixups like bumping
-release/version name would be acceptable.
-
-* Command line pull of multiple branches from one repository:
-+
-------------------------------------------------
-$ git checkout master
-$ git fetch origin +pu:pu maint:tmp
-$ git pull . tmp
-------------------------------------------------
-+
-This updates (or creates, as necessary) branches `pu` and `tmp` in
-the local repository by fetching from the branches (respectively)
-`pu` and `maint` from the remote repository.
-+
-The `pu` branch will be updated even if it is does not fast-forward;
-the others will not be.
-+
-The final command then merges the newly fetched `tmp` into master.
 
 
 If you tried a pull which resulted in a complex conflicts and
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt
index ba6a8a2fb..37c88953d 100644
--- a/Documentation/git-push.txt
+++ b/Documentation/git-push.txt
@@ -138,6 +138,11 @@ useful if you write an alias or script around 'git-push'.
 --verbose::
 	Run verbosely.
 
+-q::
+--quiet::
+	Suppress all output, including the listing of updated refs,
+	unless an error occurs.
+
 include::urls-remotes.txt[]
 
 OUTPUT
diff --git a/Documentation/git-rebase.txt b/Documentation/git-rebase.txt
index 0aefc34d0..33e0ef1f6 100644
--- a/Documentation/git-rebase.txt
+++ b/Documentation/git-rebase.txt
@@ -368,14 +368,17 @@ By replacing the command "pick" with the command "edit", you can tell
 the files and/or the commit message, amend the commit, and continue
 rebasing.
 
+If you just want to edit the commit message for a commit, replace the
+command "pick" with the command "reword".
+
 If you want to fold two or more commits into one, replace the command
 "pick" with "squash" for the second and subsequent commit.  If the
 commits had different authors, it will attribute the squashed commit to
 the author of the first commit.
 
-In both cases, or when a "pick" does not succeed (because of merge
-errors), the loop will stop to let you fix things, and you can continue
-the loop with `git rebase --continue`.
+'git-rebase' will stop when "pick" has been replaced with "edit" or
+when a command fails due to merge errors. When you are done editing
+and/or resolving conflicts you can continue with `git rebase --continue`.
 
 For example, if you want to reorder the last 5 commits, such that what
 was HEAD~4 becomes the new HEAD. To achieve that, you would call
diff --git a/Documentation/git-replace.txt b/Documentation/git-replace.txt
index 915cb77b2..8adc1ef55 100644
--- a/Documentation/git-replace.txt
+++ b/Documentation/git-replace.txt
@@ -23,6 +23,26 @@ replacement object.
 Unless `-f` is given, the replace reference must not yet exist in
 `.git/refs/replace/` directory.
 
+Replace references will be used by default by all git commands except
+those doing reachability traversal (prune, pack transfer and fsck).
+
+It is possible to disable use of replacement refs for any command
+using the --no-replace-objects option just after "git".
+
+For example if commit "foo" has been replaced by commit "bar":
+
+------------------------------------------------
+$ git --no-replace-object cat-file commit foo
+------------------------------------------------
+
+show information about commit "foo", while:
+
+------------------------------------------------
+$ git cat-file commit foo
+------------------------------------------------
+
+show information about commit "bar".
+
 OPTIONS
 -------
 -f::
@@ -54,6 +74,7 @@ SEE ALSO
 --------
 linkgit:git-tag[1]
 linkgit:git-branch[1]
+linkgit:git[1]
 
 Author
 ------
diff --git a/Documentation/git-stash.txt b/Documentation/git-stash.txt
index 3f14b727b..fafe728f8 100644
--- a/Documentation/git-stash.txt
+++ b/Documentation/git-stash.txt
@@ -78,7 +78,8 @@ stash@{1}: On master: 9cc0589... Add git-stash
 ----------------------------------------------------------------
 +
 The command takes options applicable to the 'git-log'
-command to control what is shown and how. See linkgit:git-log[1].
+command to control what is shown and how. If no options are set, the
+default is `-n 10`. See linkgit:git-log[1].
 
 show [<stash>]::
 
diff --git a/Documentation/git.txt b/Documentation/git.txt
index d97aaf5bf..0f536793d 100644
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -10,7 +10,7 @@ SYNOPSIS
 --------
 [verse]
 'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path]
-    [-p|--paginate|--no-pager]
+    [-p|--paginate|--no-pager] [--no-replace-objects]
     [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE]
     [--help] COMMAND [ARGS]
 
@@ -43,9 +43,11 @@ unreleased) version of git, that is available from 'master'
 branch of the `git.git` repository.
 Documentation for older releases are available here:
 
-* link:v1.6.5/git.html[documentation for release 1.6.5]
+* link:v1.6.5.2/git.html[documentation for release 1.6.5.2]
 
 * release notes for
+  link:RelNotes-1.6.5.2.txt[1.6.5.2],
+  link:RelNotes-1.6.5.1.txt[1.6.5.1],
   link:RelNotes-1.6.5.txt[1.6.5].
 
 * link:v1.6.4.4/git.html[documentation for release 1.6.4.4]
@@ -237,6 +239,10 @@ help ...`.
 	environment is not set, it is set to the current working
 	directory.
 
+--no-replace-objects::
+	Do not use replacement refs to replace git objects. See
+	linkgit:git-replace[1] for more information.
+
 
 FURTHER DOCUMENTATION
 ---------------------
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt
index 1195e83b6..1f472cea5 100644
--- a/Documentation/gitattributes.txt
+++ b/Documentation/gitattributes.txt
@@ -560,6 +560,16 @@ in the file.  E.g. the string `$Format:%H$` will be replaced by the
 commit hash.
 
 
+Packing objects
+~~~~~~~~~~~~~~~
+
+`delta`
+^^^^^^^
+
+Delta compression will not be attempted for blobs for paths with the
+attribute `delta` set to false.
+
+
 Viewing files in GUI tools
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/Documentation/pt_BR/gittutorial.txt b/Documentation/pt_BR/gittutorial.txt
index 81e7ad7df..beba06525 100644
--- a/Documentation/pt_BR/gittutorial.txt
+++ b/Documentation/pt_BR/gittutorial.txt
@@ -1,15 +1,15 @@
 gittutorial(7)
 ==============
 
-NAME
+NOME
 ----
 gittutorial - Um tutorial de introdução ao git (para versão 1.5.1 ou mais nova)
 
-SYNOPSIS
+SINOPSE
 --------
 git *
 
-DESCRIPTION
+DESCRIÇÃO
 -----------
 
 Este tutorial explica como importar um novo projeto para o git,
@@ -64,11 +64,11 @@ Git irá responder
 Initialized empty Git repository in .git/
 ------------------------------------------------
 
-Você agora iniciou seu diretório de trabalho--você deve ter notado um
-novo diretório criado, com o nome de ".git".
+Agora que você iniciou seu diretório de trabalho, você deve ter notado que um
+novo diretório foi criado com o nome de ".git".
 
 A seguir, diga ao git para gravar um instantâneo do conteúdo de todos os
-arquivos sob o diretório corrente (note o '.'), com 'git-add':
+arquivos sob o diretório atual (note o '.'), com 'git-add':
 
 ------------------------------------------------
 $ git add .
@@ -126,8 +126,8 @@ mudanças com:
 $ git commit
 ------------------------------------------------
 
-Isto irá novamente te pedir por uma mensagem descrevendo a mudança, e,
-então, gravar a nova versão do projeto.
+Ao executar esse comando, ele irá te pedir uma mensagem descrevendo a mudança,
+e, então, irá gravar a nova versão do projeto.
 
 Alternativamente, ao invés de executar 'git-add' antes, você pode usar
 
@@ -143,7 +143,7 @@ idéia começar a mensagem com uma simples e curta (menos de 50
 caracteres) linha sumarizando a mudança, seguida de uma linha em branco
 e, então, uma descrição mais detalhada. Ferramentas que transformam
 commits em email, por exemplo, usam a primeira linha no campo de
-cabeçalho Subject: e o resto no corpo.
+cabeçalho "Subject:" e o resto no corpo.
 
 Git rastreia conteúdo, não arquivos
 ----------------------------
@@ -155,7 +155,7 @@ usado tanto para arquivos novos e arquivos recentemente modificados, e
 em ambos os casos, ele tira o instantâneo dos arquivos dados e armazena
 o conteúdo no índice, pronto para inclusão do próximo commit.
 
-Visualizando história do projeto
+Visualizando a história do projeto
 -----------------------
 
 Em qualquer ponto você pode visualizar a história das suas mudanças
@@ -165,7 +165,7 @@ usando
 $ git log
 ------------------------------------------------
 
-Se você também quer ver a diferença completa a cada passo, use
+Se você também quiser ver a diferença completa a cada passo, use
 
 ------------------------------------------------
 $ git log -p