diff options
Diffstat (limited to 'Documentation')
33 files changed, 550 insertions, 279 deletions
diff --git a/Documentation/Makefile b/Documentation/Makefile index 144ec32f1..e18242a6d 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -41,7 +41,8 @@ man7dir=$(mandir)/man7 ASCIIDOC=asciidoc ASCIIDOC_EXTRA = -MANPAGE_XSL = callouts.xsl +MANPAGE_XSL = manpage-normal.xsl +XMLTO_EXTRA = INSTALL?=install RM ?= rm -f DOC_REF = origin/man @@ -59,13 +60,52 @@ endif -include ../config.mak.autogen -include ../config.mak +# +# For asciidoc ... +# -7.1.2, no extra settings are needed. +# 8.0-, set ASCIIDOC8. +# + +# +# For docbook-xsl ... +# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0) +# 1.69.0, no extra settings are needed? +# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP? +# 1.71.1, no extra settings are needed? +# 1.72.0, set DOCBOOK_XSL_172. +# 1.73.0-, set ASCIIDOC_NO_ROFF +# + +# +# If you had been using DOCBOOK_XSL_172 in an attempt to get rid +# of 'the ".ft C" problem' in your generated manpages, and you +# instead ended up with weird characters around callouts, try +# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8). +# + ifdef ASCIIDOC8 ASCIIDOC_EXTRA += -a asciidoc7compatible endif ifdef DOCBOOK_XSL_172 -ASCIIDOC_EXTRA += -a docbook-xsl-172 +ASCIIDOC_EXTRA += -a git-asciidoc-no-roff MANPAGE_XSL = manpage-1.72.xsl +else + ifdef ASCIIDOC_NO_ROFF + # docbook-xsl after 1.72 needs the regular XSL, but will not + # pass-thru raw roff codes from asciidoc.conf, so turn them off. + ASCIIDOC_EXTRA += -a git-asciidoc-no-roff + endif endif +ifdef MAN_BOLD_LITERAL +XMLTO_EXTRA += -m manpage-bold-literal.xsl +endif +ifdef DOCBOOK_SUPPRESS_SP +XMLTO_EXTRA += -m manpage-suppress-sp.xsl +endif + +SHELL_PATH ?= $(SHELL) +# Shell quote; +SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH)) # # Please note that there is a minor bug in asciidoc. @@ -76,6 +116,32 @@ endif # yourself - yes, all 6 characters of it! # +QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir +QUIET_SUBDIR1 = + +ifneq ($(findstring $(MAKEFLAGS),w),w) +PRINT_DIR = --no-print-directory +else # "make -w" +NO_SUBDIR = : +endif + +ifneq ($(findstring $(MAKEFLAGS),s),s) +ifndef V + QUIET_ASCIIDOC = @echo ' ' ASCIIDOC $@; + QUIET_XMLTO = @echo ' ' XMLTO $@; + QUIET_DB2TEXI = @echo ' ' DB2TEXI $@; + QUIET_MAKEINFO = @echo ' ' MAKEINFO $@; + QUIET_DBLATEX = @echo ' ' DBLATEX $@; + QUIET_XSLTPROC = @echo ' ' XSLTPROC $@; + QUIET_GEN = @echo ' ' GEN $@; + QUIET_STDERR = 2> /dev/null + QUIET_SUBDIR0 = +@subdir= + QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \ + $(MAKE) $(PRINT_DIR) -C $$subdir + export V +endif +endif + all: html man html: $(DOC_HTML) @@ -116,10 +182,10 @@ install-pdf: pdf $(INSTALL) -m 644 user-manual.pdf $(DESTDIR)$(pdfdir) install-html: html - sh ./install-webdoc.sh $(DESTDIR)$(htmldir) + '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir) ../GIT-VERSION-FILE: .FORCE-GIT-VERSION-FILE - $(MAKE) -C ../ GIT-VERSION-FILE + $(QUIET_SUBDIR0)../ $(QUIET_SUBDIR1) GIT-VERSION-FILE -include ../GIT-VERSION-FILE @@ -127,8 +193,8 @@ install-html: html # Determine "include::" file references in asciidoc files. # doc.dep : $(wildcard *.txt) build-docdep.perl - $(RM) $@+ $@ - $(PERL_PATH) ./build-docdep.perl >$@+ + $(QUIET_GEN)$(RM) $@+ $@ && \ + $(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \ mv $@+ $@ -include doc.dep @@ -146,102 +212,105 @@ cmds_txt = cmds-ancillaryinterrogators.txt \ $(cmds_txt): cmd-list.made cmd-list.made: cmd-list.perl ../command-list.txt $(MAN1_TXT) - $(RM) $@ - $(PERL_PATH) ./cmd-list.perl ../command-list.txt + $(QUIET_GEN)$(RM) $@ && \ + $(PERL_PATH) ./cmd-list.perl ../command-list.txt $(QUIET_STDERR) && \ date >$@ clean: $(RM) *.xml *.xml+ *.html *.html+ *.1 *.5 *.7 - $(RM) *.texi *.texi+ git.info gitman.info + $(RM) *.texi *.texi+ *.texi++ git.info gitman.info $(RM) howto-index.txt howto/*.html doc.dep $(RM) technical/api-*.html technical/api-index.txt $(RM) $(cmds_txt) *.made $(MAN_HTML): %.html : %.txt - $(RM) $@+ $@ + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ $(ASCIIDOC) -b xhtml11 -d manpage -f asciidoc.conf \ - $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< + $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< && \ mv $@+ $@ %.1 %.5 %.7 : %.xml - $(RM) $@ - xmlto -m $(MANPAGE_XSL) man $< + $(QUIET_XMLTO)$(RM) $@ && \ + xmlto -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $< %.xml : %.txt - $(RM) $@+ $@ + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ $(ASCIIDOC) -b docbook -d manpage -f asciidoc.conf \ - $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< + $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< && \ mv $@+ $@ user-manual.xml: user-manual.txt user-manual.conf - $(ASCIIDOC) -b docbook -d book $< + $(QUIET_ASCIIDOC)$(ASCIIDOC) -b docbook -d book $< technical/api-index.txt: technical/api-index-skel.txt \ technical/api-index.sh $(patsubst %,%.txt,$(API_DOCS)) - cd technical && sh ./api-index.sh + $(QUIET_GEN)cd technical && '$(SHELL_PATH_SQ)' ./api-index.sh $(patsubst %,%.html,$(API_DOCS) technical/api-index): %.html : %.txt - $(ASCIIDOC) -b xhtml11 -f asciidoc.conf \ + $(QUIET_ASCIIDOC)$(ASCIIDOC) -b xhtml11 -f asciidoc.conf \ $(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) $*.txt XSLT = docbook.xsl XSLTOPTS = --xinclude --stringparam html.stylesheet docbook-xsl.css user-manual.html: user-manual.xml - xsltproc $(XSLTOPTS) -o $@ $(XSLT) $< + $(QUIET_XSLTPROC)xsltproc $(XSLTOPTS) -o $@ $(XSLT) $< git.info: user-manual.texi - $(MAKEINFO) --no-split -o $@ user-manual.texi + $(QUIET_MAKEINFO)$(MAKEINFO) --no-split -o $@ user-manual.texi user-manual.texi: user-manual.xml - $(RM) $@+ $@ - $(DOCBOOK2X_TEXI) user-manual.xml --encoding=UTF-8 --to-stdout | \ - $(PERL_PATH) fix-texi.perl >$@+ + $(QUIET_DB2TEXI)$(RM) $@+ $@ && \ + $(DOCBOOK2X_TEXI) user-manual.xml --encoding=UTF-8 --to-stdout >$@++ && \ + $(PERL_PATH) fix-texi.perl <$@++ >$@+ && \ + rm $@++ && \ mv $@+ $@ user-manual.pdf: user-manual.xml - $(RM) $@+ $@ - $(DBLATEX) -o $@+ -p /etc/asciidoc/dblatex/asciidoc-dblatex.xsl -s /etc/asciidoc/dblatex/asciidoc-dblatex.sty $< + $(QUIET_DBLATEX)$(RM) $@+ $@ && \ + $(DBLATEX) -o $@+ -p /etc/asciidoc/dblatex/asciidoc-dblatex.xsl -s /etc/asciidoc/dblatex/asciidoc-dblatex.sty $< && \ mv $@+ $@ gitman.texi: $(MAN_XML) cat-texi.perl - $(RM) $@+ $@ + $(QUIET_DB2TEXI)$(RM) $@+ $@ && \ ($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --encoding=UTF-8 \ - --to-stdout $(xml);)) | $(PERL_PATH) cat-texi.perl $@ >$@+ + --to-stdout $(xml) &&) true) > $@++ && \ + $(PERL_PATH) cat-texi.perl $@ <$@++ >$@+ && \ + rm $@++ && \ mv $@+ $@ gitman.info: gitman.texi - $(MAKEINFO) --no-split --no-validate $*.texi + $(QUIET_MAKEINFO)$(MAKEINFO) --no-split --no-validate $*.texi $(patsubst %.txt,%.texi,$(MAN_TXT)): %.texi : %.xml - $(RM) $@+ $@ - $(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ + $(QUIET_DB2TEXI)$(RM) $@+ $@ && \ + $(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ && \ mv $@+ $@ howto-index.txt: howto-index.sh $(wildcard howto/*.txt) - $(RM) $@+ $@ - sh ./howto-index.sh $(wildcard howto/*.txt) >$@+ + $(QUIET_GEN)$(RM) $@+ $@ && \ + '$(SHELL_PATH_SQ)' ./howto-index.sh $(wildcard howto/*.txt) >$@+ && \ mv $@+ $@ $(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt - $(ASCIIDOC) -b xhtml11 $*.txt + $(QUIET_ASCIIDOC)$(ASCIIDOC) -b xhtml11 $*.txt WEBDOC_DEST = /pub/software/scm/git/docs $(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt - $(RM) $@+ $@ - sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b xhtml11 - >$@+ + $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ + sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b xhtml11 - >$@+ && \ mv $@+ $@ install-webdoc : html - sh ./install-webdoc.sh $(WEBDOC_DEST) + '$(SHELL_PATH_SQ)' ./install-webdoc.sh $(WEBDOC_DEST) quick-install: quick-install-man quick-install-man: - sh ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir) + '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(DOC_REF) $(DESTDIR)$(mandir) quick-install-html: - sh ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir) + '$(SHELL_PATH_SQ)' ./install-doc-quick.sh $(HTML_REF) $(DESTDIR)$(htmldir) .PHONY: .FORCE-GIT-VERSION-FILE diff --git a/Documentation/RelNotes-1.6.2.2.txt b/Documentation/RelNotes-1.6.2.2.txt index 28bfa5399..fafa9986b 100644 --- a/Documentation/RelNotes-1.6.2.2.txt +++ b/Documentation/RelNotes-1.6.2.2.txt @@ -7,9 +7,15 @@ Fixes since v1.6.2.1 * A longstanding confusing description of what --pickaxe option of git-diff does has been clarified in the documentation. +* "git-blame -S" did not quite work near the commits that were given + on the command line correctly. + * "git diff --pickaxe-regexp" did not count overlapping matches correctly. +* "git diff" did not feed files in work-tree representation to external + diff and textconv. + * "git-fetch" in a repository that was not cloned from anywhere said it cannot find 'origin', which was hard to understand for new people. @@ -27,9 +33,13 @@ Fixes since v1.6.2.1 * 'git-submodule add' did not tolerate extra slashes and ./ in the path it accepted from the command line; it now is more lenient. +* git-svn misbehaved when the project contained a path that began with + two dashes. + +* import-zips script (in contrib) did not compute the common directory + prefix correctly. + +* miscompilation of negated enum constants by old gcc (2.9) affected the + codepaths to spawn subprocesses. ---- -exec >/var/tmp/1 -O=v1.6.2.1-23-g67c176f -echo O=$(git describe maint) -git shortlog --no-merges $O..maint +Many small documentation updates are included as well. diff --git a/Documentation/RelNotes-1.6.2.3.txt b/Documentation/RelNotes-1.6.2.3.txt new file mode 100644 index 000000000..4d3c1ac91 --- /dev/null +++ b/Documentation/RelNotes-1.6.2.3.txt @@ -0,0 +1,22 @@ +GIT v1.6.2.3 Release Notes +========================== + +Fixes since v1.6.2.2 +-------------------- + +* Setting an octal mode value to core.sharedrepository configuration to + restrict access to the repository to group members did not work as + advertised. + +* A fairly large and trivial memory leak while rev-list shows list of + reachable objects has been identified and plugged. + +* "git-commit --interactive" did not abort when underlying "git-add -i" + signaled a failure. + +* git-repack (invoked from git-gc) did not work as nicely as it should in + a repository that borrows objects from neighbours via alternates + mechanism especially when some packs are marked with the ".keep" flag + to prevent them from being repacked. + +Many small documentation updates are included as well. diff --git a/Documentation/RelNotes-1.6.3.txt b/Documentation/RelNotes-1.6.3.txt index f0a2e41c7..9aa143b19 100644 --- a/Documentation/RelNotes-1.6.3.txt +++ b/Documentation/RelNotes-1.6.3.txt @@ -40,6 +40,9 @@ Updates since v1.6.2 * many uses of lstat(2) in the codepath for "git checkout" have been optimized out. +* pruning reflog entries that are unreachable from the tip of the ref + during "git reflog prune" (hence "git gc") was very inefficient. + (usability, bells and whistles) * rsync:/path/to/repo can be used to run git over rsync for local @@ -56,12 +59,20 @@ Updates since v1.6.2 spelled as "--format=<style>". In addition, --format=%formatstring is a short-hand for --pretty=tformat:%formatstring. -* "--oneline" is a synonym for "--pretty=oneline --abbrev=commit". +* "--oneline" is a synonym for "--pretty=oneline --abbrev-commit". * If you realize that you botched the patch when you are editing hunks with the 'edit' action in git-add -i/-p, you can abort the editor to tell git not to apply it. +* The number of commits shown in "you are ahead/behind your upstream" + messages given by "git checkout" and "git status" used to count merge + commits; now it doesn't. + +* @{-1} is a new way to refer to the last branch you were on introduced in + 1.6.2, but the initial implementation did not teach this to a few + commands. Now the syntax works with "branch -m @{-1} newname". + * git-archive learned --output=<file> option. * git-bisect shows not just the number of remaining commits whose goodness @@ -77,11 +88,23 @@ Updates since v1.6.2 * git-clone runs post-checkout hook when run without --no-checkout. +* git-fast-export choked when seeing a tag that does not point at commit. + * git-format-patch can be told to use attachment with a new configuration, format.attach. * git-format-patch can be told to produce deep or shallow message threads. +* git-format-patch can be told to always add sign-off with a configuration + variable. + +* git-format-patch learned format.headers configuration to add extra + header fields to the output. This behaviour is similar to the existing + --add-header=<header> option of the command. + +* git-format-patch gives human readable names to the attached files, when + told to send patches as attachments. + * git-grep learned to highlight the found substrings in color. * git-imap-send learned to work around Thunderbird's inability to easily @@ -107,6 +130,13 @@ Updates since v1.6.2 * Makefile learned 'coverage' option to run the test suites with coverage tracking enabled. +* Building the manpages with docbook-xsl between 1.69.1 and 1.71.1 now + requires setting DOCBOOK_SUPPRESS_SP to work around a docbook-xsl bug. + This workaround used to be enabled by default, but causes problems + with newer versions of docbook-xsl. In addition, there are a few more + knobs you can tweak to work around issues with various versions of the + docbook-xsl package. See comments in Documentation/Makefile for details. + Fixes since v1.6.2 ------------------ @@ -116,20 +146,26 @@ release, unless otherwise noted. Here are fixes that this release has, but have not been backported to v1.6.2.X series. -* "git-blame -S" did not quite work near the commits that were given - on the command line correctly (jc/maint-1.6.0-blame-s). - * The initial checkout did not read the attributes from the .gitattribute file that is being checked out. -* git-diff feeds files in work-tree representation to external diff and - textconv (js/maint-diff-temp-smudge). +* "git-checkout <tree-ish> <submodule>" did not update the index entry at + the named path; it now does. * git-gc spent excessive amount of time to decide if an object appears in a locally existing pack (if needed, backport by merging 69e020a). +* "git-ls-tree" and "git-diff-tree" used a pathspec correctly when + deciding to descend into a subdirectory but they did not match the + individual paths correctly. This caused pathspecs "abc/d ab" to match + "abc/0" ("abc/d" made them decide to descend into the directory "abc/", + and then "ab" incorrectly matched "abc/0" when it shouldn't). + +* "git-merge-recursive" was broken when a submodule entry was involved in + a criss-cross merge situation. + --- exec >/var/tmp/1 -O=v1.6.2.1-399-gaa72a14 +O=v1.6.2.2-484-g796b137 echo O=$(git describe master) git shortlog --no-merges $O..master ^maint diff --git a/Documentation/asciidoc.conf b/Documentation/asciidoc.conf index 1e735df3b..dc76e7f07 100644 --- a/Documentation/asciidoc.conf +++ b/Documentation/asciidoc.conf @@ -27,7 +27,7 @@ ifdef::backend-docbook[] endif::backend-docbook[] ifdef::backend-docbook[] -ifndef::docbook-xsl-172[] +ifndef::git-asciidoc-no-roff[] # "unbreak" docbook-xsl v1.68 for manpages. v1.69 works with or without this. # v1.72 breaks with this because it replaces dots not in roff requests. [listingblock] @@ -42,16 +42,16 @@ ifdef::doctype-manpage[] endif::doctype-manpage[] </literallayout> {title#}</example> -endif::docbook-xsl-172[] +endif::git-asciidoc-no-roff[] -ifdef::docbook-xsl-172[] +ifdef::git-asciidoc-no-roff[] ifdef::doctype-manpage[] # The following two small workarounds insert a simple paragraph after screen [listingblock] <example><title>{title}</title> -<screen> +<literallayout> | -</screen><simpara></simpara> +</literallayout><simpara></simpara> {title#}</example> [verseblock] @@ -59,10 +59,11 @@ ifdef::doctype-manpage[] {title%}<literallayout{id? id="{id}"}> {title#}<literallayout> | -</literallayout><simpara></simpara> +</literallayout> {title#}</para></formalpara> +{title%}<simpara></simpara> endif::doctype-manpage[] -endif::docbook-xsl-172[] +endif::git-asciidoc-no-roff[] endif::backend-docbook[] ifdef::doctype-manpage[] diff --git a/Documentation/callouts.xsl b/Documentation/callouts.xsl deleted file mode 100644 index 6a361a213..000000000 --- a/Documentation/callouts.xsl +++ /dev/null @@ -1,30 +0,0 @@ -<!-- callout.xsl: converts asciidoc callouts to man page format --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> -<xsl:template match="co"> - <xsl:value-of select="concat('\fB(',substring-after(@id,'-'),')\fR')"/> -</xsl:template> -<xsl:template match="calloutlist"> - <xsl:text>.sp </xsl:text> - <xsl:apply-templates/> - <xsl:text> </xsl:text> -</xsl:template> -<xsl:template match="callout"> - <xsl:value-of select="concat('\fB',substring-after(@arearefs,'-'),'. \fR')"/> - <xsl:apply-templates/> - <xsl:text>.br </xsl:text> -</xsl:template> - -<!-- sorry, this is not about callouts, but attempts to work around - spurious .sp at the tail of the line docbook stylesheets seem to add --> -<xsl:template match="simpara"> - <xsl:variable name="content"> - <xsl:apply-templates/> - </xsl:variable> - <xsl:value-of select="normalize-space($content)"/> - <xsl:if test="not(ancestor::authorblurb) and - not(ancestor::personblurb)"> - <xsl:text> </xsl:text> - </xsl:if> -</xsl:template> - -</xsl:stylesheet> diff --git a/Documentation/config.txt b/Documentation/config.txt index 77d3a8e31..f3ebd2f9a 100644 --- a/Documentation/config.txt +++ b/Documentation/config.txt @@ -480,7 +480,7 @@ branch.<name>.remote:: branch.<name>.merge:: Defines, together with branch.<name>.remote, the upstream branch for the given branch. It tells 'git-fetch'/'git-pull' which - branch to merge from. + branch to merge and can also affect 'git-push' (see push.default). When in branch <name>, it tells 'git-fetch' the default refspec to be marked for merging in FETCH_HEAD. The value is handled like the remote part of a refspec, and must match a @@ -715,6 +715,13 @@ format.thread:: A true boolean value is the same as `shallow`, and a false value disables threading. +format.signoff:: + A boolean value which lets you enable the `-s/--signoff` option of + format-patch by default. *Note:* Adding the Signed-off-by: line to a + patch should be a conscious act and means that you certify you have + the rights to submit this work under the same open source license. + Please see the 'SubmittingPatches' document for further discussion. + gc.aggressiveWindow:: The window size parameter used in the delta compression algorithm used by 'git-gc --aggressive'. This defaults diff --git a/Documentation/docbook-xsl.css b/Documentation/docbook-xsl.css index b878b385c..e11c8f053 100644 --- a/Documentation/docbook-xsl.css +++ b/Documentation/docbook-xsl.css @@ -16,6 +16,7 @@ body blockquote { html body { margin: 1em 5% 1em 5%; line-height: 1.2; + font-family: sans-serif; } body div { @@ -128,6 +129,15 @@ body pre { tt.literal, code.literal { color: navy; + font-family: sans-serif; +} + +code.literal:before { content: "'"; } +code.literal:after { content: "'"; } + +em { + font-style: italic; + color: #064; } div.literallayout p { @@ -137,7 +147,6 @@ div.literallayout p { div.literallayout { font-family: monospace; -# margin: 0.5em 10% 0.5em 1em; margin: 0em; color: navy; border: 1px solid silver; @@ -187,7 +196,8 @@ dt { } dt span.term { - font-style: italic; + font-style: normal; + color: navy; } div.variablelist dd p { diff --git a/Documentation/git-branch.txt b/Documentation/git-branch.txt index 31ba7f2ad..ba3dea684 100644 --- a/Documentation/git-branch.txt +++ b/Documentation/git-branch.txt @@ -100,7 +100,9 @@ OPTIONS -v:: --verbose:: - Show sha1 and commit subject line for each head. + Show sha1 and commit subject line for each head, along with + relationship to upstream branch (if any). If given twice, print + the name of the upstream branch, as well. --abbrev=<length>:: Alter the sha1's minimum display length in the output listing. diff --git a/Documentation/git-check-ref-format.txt b/Documentation/git-check-ref-format.txt index 171b68377..c1ce26884 100644 --- a/Documentation/git-check-ref-format.txt +++ b/Documentation/git-check-ref-format.txt @@ -7,7 +7,9 @@ git-check-ref-format - Ensures that a reference name is well formed SYNOPSIS -------- +[verse] 'git check-ref-format' <refname> +'git check-ref-format' [--branch] <branchname-shorthand> DESCRIPTION ----------- @@ -30,7 +32,11 @@ imposes the following rules on how references are named: caret `{caret}`, colon `:`, question-mark `?`, asterisk `*`, or open bracket `[` anywhere. -. They cannot end with a slash `/`. +. They cannot end with a slash `/` nor a dot `.`. + +. They cannot end with the sequence `.lock`. + +. They cannot contain a sequence `@{`. These rules make it easy for shell script based tools to parse reference names, pathname expansion by the shell when a reference name is used @@ -49,6 +55,18 @@ reference name expressions (see linkgit:git-rev-parse[1]): It may also be used to select a specific object such as with 'git-cat-file': "git cat-file blob v1.3.3:refs.c". +. at-open-brace `@{` is used as a notation to access a reflog entry. + +With the `--branch` option, it expands a branch name shorthand and +prints the name of the branch the shorthand refers to. + +EXAMPLE +------- + +git check-ref-format --branch @{-1}:: + +Print the name of the previous branch. + GIT --- diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 1a6c19e5c..223ea9cae 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -126,9 +126,13 @@ the conflicted merge in the specified paths. <new_branch>:: Name for the new branch. +<tree-ish>:: + Tree to checkout from (when paths are given). If not specified, + the index will be used. + <branch>:: - Branch to checkout; may be any object ID that resolves to a - commit. Defaults to HEAD. + Branch to checkout (when no paths are given); may be any object + ID that resolves to a commit. Defaults to HEAD. + When this parameter names a non-branch (but still a valid commit object), your HEAD becomes 'detached'. @@ -191,7 +195,7 @@ $ git checkout hello.c <3> + <1> switch branch <2> take a file out of another commit -<3> restore hello.c from HEAD of current branch +<3> restore hello.c from the index + If you have an unfortunate branch that is named `hello.c`, this step would be confused as an instruction to switch to that branch. diff --git a/Documentation/git-clone.txt b/Documentation/git-clone.txt index 95f08b911..4072f40d7 100644 --- a/Documentation/git-clone.txt +++ b/Documentation/git-clone.txt @@ -117,7 +117,7 @@ then the cloned repository will become corrupt. --origin <name>:: -o <name>:: Instead of using the remote name 'origin' to keep track - of the upstream repository, use <name> instead. + of the upstream repository, use <name>. --upload-pack <upload-pack>:: -u <upload-pack>:: diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt index e1fd047bb..d7bab13f6 100644 --- a/Documentation/git-cvsimport.txt +++ b/Documentation/git-cvsimport.txt @@ -173,24 +173,26 @@ ISSUES Problems related to timestamps: * If timestamps of commits in the cvs repository are not stable enough - to be used for ordering commits + to be used for ordering commits changes may show up in the wrong + order. * If any files were ever "cvs import"ed more than once (e.g., import of - more than one vendor release) + more than one vendor release) the HEAD contains the wrong content. * If the timestamp order of different files cross the revision order - within the commit matching time window + within the commit matching time window the order of commits may be + wrong. Problems related to branches: - * Branches on which no commits have been made are not imported + * Branches on which no commits have been made are not imported. * All files from the branching point are added to a branch even if - never added in cvs - * files added to the source branch *after* a daughter branch was - created: If previously no commit was made on the daugther branch they - will erroneously be added to the daughter branch in git + never added in cvs. + * This applies to files added to the source branch *after* a daughter + branch was created: if previously no commit was made on the daughter + branch they will erroneously be added to the daughter branch in git. Problems related to tags: -* Multiple tags on the same revision are not imported +* Multiple tags on the same revision are not imported. If you suspect that any of these issues may apply to the repository you want to import consider using these alternative tools which proved to be diff --git a/Documentation/git-filter-branch.txt b/Documentation/git-filter-branch.txt index 237f85e76..ab527b5b3 100644 --- a/Documentation/git-filter-branch.txt +++ b/Documentation/git-filter-branch.txt @@ -31,6 +31,9 @@ changes, which would normally have no effect. Nevertheless, this may be useful in the future for compensating for some git bugs or such, therefore such a usage is permitted. +*NOTE*: This command honors `.git/info/grafts`. If you have any grafts +defined, running this command will make them permanent. + *WARNING*! The rewritten history will have different object names for all the objects and will not converge with the original branch. You will not be able to easily push and distribute the rewritten branch on top of the diff --git a/Documentation/git-for-each-ref.txt b/Documentation/git-for-each-ref.txt index 5061d3e4e..b362e9ed1 100644 --- a/Documentation/git-for-each-ref.txt +++ b/Documentation/git-for-each-ref.txt @@ -85,6 +85,11 @@ objectsize:: objectname:: The object name (aka SHA-1). +upstream:: + The name of a local ref which can be considered ``upstream'' + from the displayed ref. Respects `:short` in the same way as + `refname` above. + In addition to the above, for commit and tag objects, the header field names (`tree`, `parent`, `object`, `type`, and `tag`) can be used to specify the value in the header field. diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt index c2eb5fab4..eb2fbcff1 100644 --- a/Documentation/git-format-patch.txt +++ b/Documentation/git-format-patch.txt @@ -40,15 +40,11 @@ There are two ways to specify which commits to operate on. REVISIONS" section in linkgit:git-rev-parse[1]) means the commits in the specified range. -A single commit, when interpreted as a <revision range> -expression, means "everything that leads to that commit", but -if you write 'git format-patch <commit>', the previous rule -applies to that command line and you do not get "everything -since the beginning of the time". If you want to format -everything since project inception to one commit, say "git -format-patch \--root <commit>" to make it clear that it is the -latter case. If you want to format a single commit, you can do -this with "git format-patch -1 <commit>". +The first rule takes precedence in the case of a single <commit>. To +apply the second rule, i.e., format everything since the beginning of +history up until <commit>, use the '\--root' option: "git format-patch +\--root <commit>". If you want to format only <commit> itself, you +can do this with "git format-patch -1 <commit>". By default, each output file is numbered sequentially from 1, and uses the first line of the commit message (massaged for pathname safety) as @@ -161,6 +157,11 @@ if that is not set. Add a "Cc:" header to the email headers. This is in addition to any configured headers, and may be used multiple times. +--add-header=<header>:: + Add an arbitrary header to the email headers. This is in addition + to any configured headers, and may be used multiple times. + For example, --add-header="Organization: git-foo" + --cover-letter:: In addition to the patches, generate a cover letter file containing the shortlog and the overall diffstat. You can @@ -182,6 +183,13 @@ not add any suffix. applied. By default the contents of changes in those files are encoded in the patch. +--root:: + Treat the revision argument as a <revision range>, even if it + is just a single commit (that would normally be treated as a + <since>). Note that root commits included in the specified + range are always formatted as creation patches, independently + of this flag. + CONFIGURATION ------------- You can specify extra mail header lines to be added to each message @@ -197,6 +205,7 @@ more than one. numbered = auto cc = <email> attach [ = mime-boundary-string ] + signoff = true ------------ diff --git a/Documentation/git-pack-refs.txt b/Documentation/git-pack-refs.txt index a5244d35f..1ee99c208 100644 --- a/Documentation/git-pack-refs.txt +++ b/Documentation/git-pack-refs.txt @@ -26,7 +26,7 @@ problem by stashing the refs in a single file, traditional `$GIT_DIR/refs` hierarchy, it is looked up in this file and used if found. -Subsequent updates to branches always creates new file under +Subsequent updates to branches always create new files under `$GIT_DIR/refs` hierarchy. A recommended practice to deal with a repository with too many @@ -35,7 +35,7 @@ occasionally run `git pack-refs \--prune`. Tags are by definition stationary and are not expected to change. Branch heads will be packed with the initial `pack-refs --all`, but only the currently active branch heads will become unpacked, -and next `pack-refs` (without `--all`) will leave them +and the next `pack-refs` (without `--all`) will leave them unpacked. diff --git a/Documentation/git-remote.txt b/Documentation/git-remote.txt index c9c0e6f93..9e2b4eaa3 100644 --- a/Documentation/git-remote.txt +++ b/Documentation/git-remote.txt @@ -16,7 +16,7 @@ SYNOPSIS 'git remote set-head' <name> [-a | -d | <branch>] 'git remote show' [-n] <name> 'git remote prune' [-n | --dry-run] <name> -'git remote update' [group] +'git remote update' [-p | --prune] [group | remote]... DESCRIPTION ----------- @@ -125,6 +125,8 @@ the configuration parameter remotes.default will get used; if remotes.default is not defined, all remotes which do not have the configuration parameter remote.<name>.skipDefaultUpdate set to true will be updated. (See linkgit:git-config[1]). ++ +With `--prune` option, prune all the remotes that are updated. DISCUSSION diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt index 10dfd667b..0b1f183ce 100644 --- a/Documentation/git-send-email.txt +++ b/Documentation/git-send-email.txt @@ -39,13 +39,13 @@ OPTIONS Composing ~~~~~~~~~ ---bcc:: +--bcc=<address>:: Specify a "Bcc:" value for each email. Default is the value of 'sendemail.bcc'. + The --bcc option must be repeated for each user you want on the bcc list. ---cc:: +--cc=<address>:: Specify a starting "Cc:" value for each email. Default is the value of 'sendemail.cc'. + @@ -68,24 +68,24 @@ and In-Reply-To headers will be used unless they are removed. + Missing From or In-Reply-To headers will be prompted for. ---from:: +--from=<address>:: Specify the sender of the emails. This will default to the value GIT_COMMITTER_IDENT, as returned by "git var -l". The user will still be prompted to confirm this entry. ---in-reply-to:: +--in-reply-to=<identifier>:: Specify the contents of the first In-Reply-To header. Subsequent emails will refer to the previous email instead of this if --chain-reply-to is set (the default) Only necessary if --compose is also set. If --compose is not set, this will be prompted for. ---subject:: +--subject=<string>:: Specify the initial subject of the email thread. Only necessary if --compose is also set. If --compose is not set, this will be prompted for. ---to:: +--to=<address>:: Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the value of the 'sendemail.to' configuration value; if that is unspecified, @@ -97,7 +97,7 @@ The --to option must be repeated for each user you want on the to list. Sending ~~~~~~~ ---envelope-sender:: +--envelope-sender=<address>:: Specify the envelope sender used to send the emails. This is useful if your default address is not the address that is subscribed to a list. If you use the sendmail binary, you must have @@ -105,12 +105,12 @@ Sending the 'sendemail.envelopesender' configuration variable; if that is unspecified, choosing the envelope sender is left to your MTA. ---smtp-encryption:: +--smtp-encryption=<encryption>:: Specify the encryption to use, either 'ssl' or 'tls'. Any other value reverts to plain SMTP. Default is the value of 'sendemail.smtpencryption'. ---smtp-pass:: +--smtp-pass[=<password>]:: Password for SMTP-AUTH. The argument is optional: If no argument is specified, then the empty string is used as the password. Default is the value of 'sendemail.smtppass', @@ -122,7 +122,7 @@ or on the command line. If a username has been specified (with specified (with '--smtp-pass' or 'sendemail.smtppass'), then the user is prompted for a password while the input is masked for privacy. ---smtp-server:: +--smtp-server=<host>:: If set, specifies the outgoing SMTP server to use (e.g. `smtp.example.com` or a raw IP address). Alternatively it can specify a full pathname of a sendmail-like program instead; @@ -132,7 +132,7 @@ user is prompted for a password while the input is masked for privacy. `/usr/lib/sendmail` if such program is available, or `localhost` otherwise. ---smtp-server-port:: +--smtp-server-port=<port>:: Specifies a port different from the default port (SMTP servers typically listen to smtp port 25 and ssmtp port 465). This can be set with 'sendemail.smtpserverport'. @@ -140,7 +140,7 @@ user is prompted for a password while the input is masked for privacy. --smtp-ssl:: Legacy alias for '--smtp-encryption ssl'. ---smtp-user:: +--smtp-user=<user>:: Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser'; if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), then authentication is not attempted. @@ -149,13 +149,13 @@ user is prompted for a password while the input is masked for privacy. Automating ~~~~~~~~~~ ---cc-cmd:: +--cc-cmd=<command>:: Specify a command to execute once per patch file which should generate patch file specific "Cc:" entries. Output of this command must be single email address per line. Default is the value of 'sendemail.cccmd' configuration value. ---[no-]chain-reply-to:: +--[no-]chain-reply-to=<identifier>:: If this is set, each email will be sent as a reply to the previous email sent. If disabled with "--no-chain-reply-to", all emails after the first will be sent as replies to the first email sent. When using @@ -163,7 +163,7 @@ Automating entire patch series. Default is the value of the 'sendemail.chainreplyto' configuration value; if that is unspecified, default to --chain-reply-to. ---identity:: +--identity=<identity>:: A configuration identity. When given, causes values in the 'sendemail.<identity>' subsection to take precedence over values in the 'sendemail' section. The default identity is @@ -174,7 +174,7 @@ Automating cc list. Default is the value of 'sendemail.signedoffbycc' configuration value; if that is unspecified, default to --signed-off-by-cc. ---suppress-cc:: +--suppress-cc=<category>:: Specify an additional category of recipients to suppress the auto-cc of: + @@ -211,7 +211,7 @@ specified, as well as 'body' if --no-signed-off-cc is specified. Administering ~~~~~~~~~~~~~ ---confirm:: +--confirm=<mode>:: Confirm just before sending: + -- diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt index cda338933..9229d45ad 100644 --- a/Documentation/git-svn.txt +++ b/Documentation/git-svn.txt @@ -85,6 +85,10 @@ COMMANDS specified, the prefix must include a trailing slash. Setting a prefix is useful if you wish to track multiple projects that share a common repository. +--ignore-paths=<regex>;; + When passed to 'init' or 'clone' this regular expression will + be preserved as a config key. See 'fetch' for a description + of '--ignore-paths'. 'fetch':: Fetch unfetched revisions from the Subversion remote we are @@ -97,6 +101,9 @@ COMMANDS makes 'git-log' (even without --date=local) show the same times that `svn log` would in the local timezone. +--parent;; + Fetch only from the SVN parent of the current HEAD. + This doesn't interfere with interoperating with the Subversion repository you cloned from, but if you wish for your local Git repository to be able to interoperate with someone else's local Git @@ -104,17 +111,25 @@ repository, either don't use this option or you should both use it in the same local timezone. --ignore-paths=<regex>;; - This allows one to specify Perl regular expression that will + This allows one to specify a Perl regular expression that will cause skipping of all matching paths from checkout from SVN. - Examples: + The '--ignore-paths' option should match for every 'fetch' + (including automatic fetches due to 'clone', 'dcommit', + 'rebase', etc) on a given repository. + +config key: svn-remote.<name>.ignore-paths + + If the ignore-paths config key is set and the command + line option is also given, both regular expressions + will be used. - --ignore-paths="^doc" - skip "doc*" directory for every fetch. +Examples: - --ignore-paths="^[^/]+/(?:branches|tags)" - skip "branches" - and "tags" of first level directories. + --ignore-paths="^doc" - skip "doc*" directory for every + fetch. - Regular expression is not persistent, you should specify - it every time when fetching. + --ignore-paths="^[^/]+/(?:branches|tags)" - skip + "branches" and "tags" of first level directories. 'clone':: Runs 'init' and 'fetch'. It will automatically create a @@ -385,7 +400,8 @@ config key: svn.authorsfile -q:: --quiet:: - Make 'git-svn' less verbose. + Make 'git-svn' less verbose. Specify a second time to make it + even less verbose. --repack[=<n>]:: --repack-flags=<flags>:: @@ -672,9 +688,9 @@ listed below are allowed: ------------------------------------------------------------------------ [svn-remote "project-a"] url = http://server.org/svn + fetch = trunk/project-a:refs/remotes/project-a/trunk branches = branches/*/project-a:refs/remotes/project-a/branches/* tags = tags/*/project-a:refs/remotes/project-a/tags/* - trunk = trunk/project-a:refs/remotes/project-a/trunk ------------------------------------------------------------------------ Keep in mind that the '*' (asterisk) wildcard of the local ref diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt index 533d18bbd..fa733214a 100644 --- a/Documentation/git-tag.txt +++ b/Documentation/git-tag.txt @@ -63,6 +63,7 @@ OPTIONS are printed when using -l. The default is not to print any annotation lines. If no number is given to `-n`, only the first line is printed. + If the tag is not annotated, the commit message is displayed instead. -l <pattern>:: List tags with names that match the given pattern (or all if no pattern is given). diff --git a/Documentation/git.txt b/Documentation/git.txt index 7513c57c6..2ce5e6b45 100644 --- a/Documentation/git.txt +++ b/Documentation/git.txt @@ -9,7 +9,7 @@ git - the stupid content tracker SYNOPSIS -------- [verse] -'git' [--version] [--exec-path[=GIT_EXEC_PATH]] +'git' [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path] [-p|--paginate|--no-pager] [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE] [--help] COMMAND [ARGS] @@ -178,6 +178,10 @@ help ...`. environment variable. If no path is given, 'git' will print the current setting and then exit. +--html-path:: + Print the path to wherever your git HTML documentation is installed + and exit. + -p:: --paginate:: Pipe all output into 'less' (or if set, $PAGER). diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt index 55668e345..b762bba75 100644 --- a/Documentation/gitattributes.txt +++ b/Documentation/gitattributes.txt @@ -60,9 +60,9 @@ same as in `.gitignore` files; see linkgit:gitignore[5]. When deciding what attributes are assigned to a path, git consults `$GIT_DIR/info/attributes` file (which has the highest precedence), `.gitattributes` file in the same directory as the -path in question, and its parent directories (the further the -directory that contains `.gitattributes` is from the path in -question, the lower its precedence). +path in question, and its parent directories up to the toplevel of the +work tree (the further the directory that contains `.gitattributes` +is from the path in question, the lower its precedence). If you wish to affect only a single repository (i.e., to assign attributes to files that are particular to one user's workflow), then diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt index 59321a2e8..7df3cef46 100644 --- a/Documentation/gitignore.txt +++ b/Documentation/gitignore.txt @@ -31,8 +31,8 @@ precedence, the last matching pattern decides the outcome): * Patterns read from a `.gitignore` file in the same directory as the path, or in any parent directory, with patterns in the - higher level files (up to the root) being overridden by those in - lower level files down to the directory containing the file. + higher level files (up to the toplevel of the work tree) being overridden + by those in lower level files down to the directory containing the file. These patterns match relative to the location of the `.gitignore` file. A project normally includes such `.gitignore` files in its repository, containing patterns for diff --git a/Documentation/manpage-1.72.xsl b/Documentation/manpage-1.72.xsl index 4065a3a27..b4d315cb8 100644 --- a/Documentation/manpage-1.72.xsl +++ b/Documentation/manpage-1.72.xsl @@ -1,21 +1,14 @@ -<!-- Based on callouts.xsl. Fixes man page callouts for DocBook 1.72 XSL --> -<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"> +<!-- manpage-1.72.xsl: + special settings for manpages rendered from asciidoc+docbook + handles peculiarities in docbook-xsl 1.72.0 --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> -<xsl:param name="man.output.quietly" select="1"/> -<xsl:param name="refentry.meta.get.quietly" select="1"/> +<xsl:import href="manpage-base.xsl"/> -<xsl:template match="co"> - <xsl:value-of select="concat('▓fB(',substring-after(@id,'-'),')▓fR')"/> -</xsl:template> -<xsl:template match="calloutlist"> - <xsl:text>⌂sp </xsl:text> - <xsl:apply-templates/> - <xsl:text> </xsl:text> -</xsl:template> -<xsl:template match="callout"> - <xsl:value-of select="concat('▓fB',substring-after(@arearefs,'-'),'. ▓fR')"/> - <xsl:apply-templates/> - <xsl:text>⌂br </xsl:text> -</xsl:template> +<!-- these are the special values for the roff control characters + needed for docbook-xsl 1.72.0 --> +<xsl:param name="git.docbook.backslash">▓</xsl:param> +<xsl:param name="git.docbook.dot" >⌂</xsl:param> </xsl:stylesheet> diff --git a/Documentation/manpage-base.xsl b/Documentation/manpage-base.xsl new file mode 100644 index 000000000..a264fa616 --- /dev/null +++ b/Documentation/manpage-base.xsl @@ -0,0 +1,35 @@ +<!-- manpage-base.xsl: + special formatting for manpages rendered from asciidoc+docbook --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<!-- these params silence some output from xmlto --> +<xsl:param name="man.output.quietly" select="1"/> +<xsl:param name="refentry.meta.get.quietly" select="1"/> + +<!-- convert asciidoc callouts to man page format; + git.docbook.backslash and git.docbook.dot params + must be supplied by another XSL file or other means --> +<xsl:template match="co"> + <xsl:value-of select="concat( + $git.docbook.backslash,'fB(', + substring-after(@id,'-'),')', + $git.docbook.backslash,'fR')"/> +</xsl:template> +<xsl:template match="calloutlist"> + <xsl:value-of select="$git.docbook.dot"/> + <xsl:text>sp </xsl:text> + <xsl:apply-templates/> + <xsl:text> </xsl:text> +</xsl:template> +<xsl:template match="callout"> + <xsl:value-of select="concat( + $git.docbook.backslash,'fB', + substring-after(@arearefs,'-'), + '. ',$git.docbook.backslash,'fR')"/> + <xsl:apply-templates/> + <xsl:value-of select="$git.docbook.dot"/> + <xsl:text>br </xsl:text> +</xsl:template> + +</xsl:stylesheet> diff --git a/Documentation/manpage-bold-literal.xsl b/Documentation/manpage-bold-literal.xsl new file mode 100644 index 000000000..608eb5df6 --- /dev/null +++ b/Documentation/manpage-bold-literal.xsl @@ -0,0 +1,17 @@ +<!-- manpage-bold-literal.xsl: + special formatting for manpages rendered from asciidoc+docbook --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<!-- render literal text as bold (instead of plain or monospace); + this makes literal text easier to distinguish in manpages + viewed on a tty --> +<xsl:template match="literal"> + <xsl:value-of select="$git.docbook.backslash"/> + <xsl:text>fB</xsl:text> + <xsl:apply-templates/> + <xsl:value-of select="$git.docbook.backslash"/> + <xsl:text>fR</xsl:text> +</xsl:template> + +</xsl:stylesheet> diff --git a/Documentation/manpage-normal.xsl b/Documentation/manpage-normal.xsl new file mode 100644 index 000000000..a48f5b11f --- /dev/null +++ b/Documentation/manpage-normal.xsl @@ -0,0 +1,13 @@ +<!-- manpage-normal.xsl: + special settings for manpages rendered from asciidoc+docbook + handles anything we want to keep away from docbook-xsl 1.72.0 --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<xsl:import href="manpage-base.xsl"/> + +<!-- these are the normal values for the roff control characters --> +<xsl:param name="git.docbook.backslash">\</xsl:param> +<xsl:param name="git.docbook.dot" >.</xsl:param> + +</xsl:stylesheet> diff --git a/Documentation/manpage-suppress-sp.xsl b/Documentation/manpage-suppress-sp.xsl new file mode 100644 index 000000000..a63c7632a --- /dev/null +++ b/Documentation/manpage-suppress-sp.xsl @@ -0,0 +1,21 @@ +<!-- manpage-suppress-sp.xsl: + special settings for manpages rendered from asciidoc+docbook + handles erroneous, inline .sp in manpage output of some + versions of docbook-xsl --> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + version="1.0"> + +<!-- attempt to work around spurious .sp at the tail of the line + that some versions of docbook stylesheets seem to add --> +<xsl:template match="simpara"> + <xsl:variable name="content"> + <xsl:apply-templates/> + </xsl:variable> + <xsl:value-of select="normalize-space($content)"/> + <xsl:if test="not(ancestor::authorblurb) and + not(ancestor::personblurb)"> + <xsl:text> </xsl:text> + </xsl:if> +</xsl:template> + +</xsl:stylesheet> diff --git a/Documentation/pretty-formats.txt b/Documentation/pretty-formats.txt index 5c6e678aa..2a845b1e5 100644 --- a/Documentation/pretty-formats.txt +++ b/Documentation/pretty-formats.txt @@ -121,6 +121,7 @@ The placeholders are: - '%d': ref names, like the --decorate option of linkgit:git-log[1] - '%e': encoding - '%s': subject +- '%f': sanitized subject line, suitable for a filename - '%b': body - '%Cred': switch color to red - '%Cgreen': switch color to green diff --git a/Documentation/rev-list-options.txt b/Documentation/rev-list-options.txt index 7dd237c2f..11eec941d 100644 --- a/Documentation/rev-list-options.txt +++ b/Documentation/rev-list-options.txt @@ -140,38 +140,38 @@ limiting may be applied. -- -n 'number':: ---max-count='number':: +--max-count=<number>:: Limit the number of commits output. ---skip='number':: +--skip=<number>:: Skip 'number' commits before starting to show the commit output. ---since='date':: ---after='date':: +--since=<date>:: +--after=<date>:: Show commits more recent than a specific date. ---until='date':: ---before='date':: +--until=<date>:: +--before=<date>:: Show commits older than a specific date. ifdef::git-rev-list[] ---max-age='timestamp':: ---min-age='timestamp':: +--max-age=<timestamp>:: +--min-age=<timestamp>:: Limit the commits output to specified time range. endif::git-rev-list[] ---author='pattern':: ---committer='pattern':: +--author=<pattern>:: +--committer=<pattern>:: Limit the commits output to ones with author/committer header lines that match the specified pattern (regular expression). ---grep='pattern':: +--grep=<pattern>:: Limit the commits output to ones with log message that matches the specified pattern (regular expression). diff --git a/Documentation/technical/api-history-graph.txt b/Documentation/technical/api-history-graph.txt index e9559790a..d66e61b1e 100644 --- a/Documentation/technical/api-history-graph.txt +++ b/Documentation/technical/api-history-graph.txt @@ -148,22 +148,22 @@ outputting that information, if desired. ------------ * * -M +* |\ * | | | * | \ \ | \ \ -M-. \ \ +*-. \ \ |\ \ \ \ | | * | | | | | | | * | | | | | * -| | | | | M +| | | | | * | | | | | |\ | | | | | | * | * | | | | | -| | | | | M \ +| | | | | * \ | | | | | |\ | | | | | * | | | | | | | * | | | diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index e33b29b1d..dbbeb7e7c 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -188,7 +188,7 @@ As you can see, a commit shows who made the latest change, what they did, and why. Every commit has a 40-hexdigit id, sometimes called the "object name" or the -"SHA1 id", shown on the first line of the "git-show" output. You can usually +"SHA-1 id", shown on the first line of the "git show" output. You can usually refer to a commit by a shorter name, such as a tag or a branch name, but this longer name can also be useful. Most importantly, it is a globally unique name for this commit: so if you tell somebody else the object name (for @@ -307,7 +307,7 @@ ref: refs/heads/master Examining an old version without creating a new branch ------------------------------------------------------ -The git-checkout command normally expects a branch head, but will also +The `git checkout` command normally expects a branch head, but will also accept an arbitrary commit; for example, you can check out the commit referenced by a tag: @@ -320,7 +320,7 @@ If you want to create a new branch from this checkout, you may do so HEAD is now at 427abfa... Linux v2.6.17 ------------------------------------------------ -The HEAD then refers to the SHA1 of the commit instead of to a branch, +The HEAD then refers to the SHA-1 of the commit instead of to a branch, and git branch shows that you are no longer on a branch: ------------------------------------------------ @@ -400,7 +400,7 @@ references with the same shorthand name, see the "SPECIFYING REVISIONS" section of linkgit:git-rev-parse[1]. [[Updating-a-repository-With-git-fetch]] -Updating a repository with git-fetch +Updating a repository with git fetch ------------------------------------ Eventually the developer cloned from will do additional work in her @@ -427,7 +427,7 @@ $ git fetch linux-nfs ------------------------------------------------- New remote-tracking branches will be stored under the shorthand name -that you gave "git-remote add", in this case linux-nfs: +that you gave "git remote add", in this case linux-nfs: ------------------------------------------------- $ git branch -r @@ -516,7 +516,7 @@ $ git bisect reset to return you to the branch you were on before. -Note that the version which git-bisect checks out for you at each +Note that the version which `git bisect` checks out for you at each point is just a suggestion, and you're free to try a different version if you think it would be a good idea. For example, occasionally you may land on a commit that broke something unrelated; @@ -592,11 +592,11 @@ In addition to HEAD, there are several other special names for commits: Merges (to be discussed later), as well as operations such as -git-reset, which change the currently checked-out commit, generally +`git reset`, which change the currently checked-out commit, generally set ORIG_HEAD to the value HEAD had before the current operation. -The git-fetch operation always stores the head of the last fetched -branch in FETCH_HEAD. For example, if you run git fetch without +The `git fetch` operation always stores the head of the last fetched +branch in FETCH_HEAD. For example, if you run `git fetch` without specifying a local branch as the target of the operation ------------------------------------------------- @@ -739,7 +739,7 @@ $ git log --pretty=oneline origin..mybranch | wc -l ------------------------------------------------- Alternatively, you may often see this sort of thing done with the -lower-level command linkgit:git-rev-list[1], which just lists the SHA1's +lower-level command linkgit:git-rev-list[1], which just lists the SHA-1's of all the given commits: ------------------------------------------------- @@ -1073,9 +1073,9 @@ $ git diff shows the difference between the working tree and the index file. -Note that "git-add" always adds just the current contents of a file +Note that "git add" always adds just the current contents of a file to the index; further changes to the same file will be ignored unless -you run git-add on the file again. +you run `git add` on the file again. When you're ready, just run @@ -1136,7 +1136,7 @@ Ignoring files A project will often generate files that you do 'not' want to track with git. This typically includes files generated by a build process or temporary backup files made by your editor. Of course, 'not' tracking files with git -is just a matter of 'not' calling `git-add` on them. But it quickly becomes +is just a matter of 'not' calling `git add` on them. But it quickly becomes annoying to have these untracked files lying around; e.g. they make `git add .` practically useless, and they keep showing up in the output of `git status`. @@ -1349,7 +1349,7 @@ $ git add file.txt ------------------------------------------------- the different stages of that file will be "collapsed", after which -git-diff will (by default) no longer show diffs for that file. +`git diff` will (by default) no longer show diffs for that file. [[undoing-a-merge]] Undoing a merge @@ -1446,7 +1446,7 @@ Fixing a mistake by rewriting history If the problematic commit is the most recent commit, and you have not yet made that commit public, then you may just -<<undoing-a-merge,destroy it using git-reset>>. +<<undoing-a-merge,destroy it using `git reset`>>. Alternatively, you can edit the working directory and update the index to fix your @@ -1474,7 +1474,7 @@ Checking out an old version of a file In the process of undoing a previous bad change, you may find it useful to check out an older version of a particular file using -linkgit:git-checkout[1]. We've used git-checkout before to switch +linkgit:git-checkout[1]. We've used `git checkout` before to switch branches, but it has quite different behavior if it is given a path name: the command @@ -1542,7 +1542,7 @@ $ git gc ------------------------------------------------- to recompress the archive. This can be very time-consuming, so -you may prefer to run git-gc when you are not doing other work. +you may prefer to run `git gc` when you are not doing other work. [[ensuring-reliability]] @@ -1634,7 +1634,7 @@ In some situations the reflog may not be able to save you. For example, suppose you delete a branch, then realize you need the history it contained. The reflog is also deleted; however, if you have not yet pruned the repository, then you may still be able to find the lost -commits in the dangling objects that git-fsck reports. See +commits in the dangling objects that `git fsck` reports. See <<dangling-objects>> for the details. ------------------------------------------------- @@ -1676,7 +1676,7 @@ Sharing development with others =============================== [[getting-updates-With-git-pull]] -Getting updates with git-pull +Getting updates with git pull ----------------------------- After you clone a repository and make a few changes of your own, you @@ -1722,7 +1722,7 @@ repository that you pulled from. <<fast-forwards,fast forward>>; instead, your branch will just be updated to point to the latest commit from the upstream branch.) -The git-pull command can also be given "." as the "remote" repository, +The `git pull` command can also be given "." as the "remote" repository, in which case it just merges in a branch from the current repository; so the commands @@ -1795,7 +1795,7 @@ Public git repositories Another way to submit changes to a project is to tell the maintainer of that project to pull the changes from your repository using linkgit:git-pull[1]. In the section "<<getting-updates-With-git-pull, -Getting updates with git-pull>>" we described this as a way to get +Getting updates with `git pull`>>" we described this as a way to get updates from the "main" repository, but it works just as well in the other direction. @@ -1847,7 +1847,7 @@ Setting up a public repository ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Assume your personal repository is in the directory ~/proj. We -first create a new clone of the repository and tell git-daemon that it +first create a new clone of the repository and tell `git daemon` that it is meant to be public: ------------------------------------------------- @@ -1878,10 +1878,10 @@ repository>>", below. Otherwise, all you need to do is start linkgit:git-daemon[1]; it will listen on port 9418. By default, it will allow access to any directory that looks like a git directory and contains the magic file -git-daemon-export-ok. Passing some directory paths as git-daemon +git-daemon-export-ok. Passing some directory paths as `git daemon` arguments will further restrict the exports to those paths. -You can also run git-daemon as an inetd service; see the +You can also run `git daemon` as an inetd service; see the linkgit:git-daemon[1] man page for details. (See especially the examples section.) @@ -1942,7 +1942,7 @@ or just $ git push ssh://yourserver.com/~you/proj.git master ------------------------------------------------- -As with git-fetch, git-push will complain if this does not result in a +As with `git fetch`, `git push` will complain if this does not result in a <<fast-forwards,fast forward>>; see the following section for details on handling this case. @@ -1952,7 +1952,7 @@ repository that has a checked-out working tree, but the working tree will not be updated by the push. This may lead to unexpected results if the branch you push to is the currently checked-out branch! -As with git-fetch, you may also set up configuration options to +As with `git fetch`, you may also set up configuration options to save typing; so, for example, after ------------------------------------------------- @@ -1988,13 +1988,13 @@ error: failed to push to 'ssh://yourserver.com/~you/proj.git' This can happen, for example, if you: - - use `git-reset --hard` to remove already-published commits, or - - use `git-commit --amend` to replace already-published commits + - use `git reset --hard` to remove already-published commits, or + - use `git commit --amend` to replace already-published commits (as in <<fixing-a-mistake-by-rewriting-history>>), or - - use `git-rebase` to rebase any already-published commits (as + - use `git rebase` to rebase any already-published commits (as in <<using-git-rebase>>). -You may force git-push to perform the update anyway by preceding the +You may force `git push` to perform the update anyway by preceding the branch name with a plus sign: ------------------------------------------------- @@ -2036,7 +2036,7 @@ advantages over the central shared repository: - Git's ability to quickly import and merge patches allows a single maintainer to process incoming changes even at very - high rates. And when that becomes too much, git-pull provides + high rates. And when that becomes too much, `git pull` provides an easy way for that maintainer to delegate this job to other maintainers while still allowing optional review of incoming changes. @@ -2404,7 +2404,7 @@ use them, and then explain some of the problems that can arise because you are rewriting history. [[using-git-rebase]] -Keeping a patch series up to date using git-rebase +Keeping a patch series up to date using git rebase -------------------------------------------------- Suppose that you create a branch "mywork" on a remote-tracking branch @@ -2468,9 +2468,9 @@ patches to the new mywork. The result will look like: ................................................ In the process, it may discover conflicts. In that case it will stop -and allow you to fix the conflicts; after fixing conflicts, use "git-add" +and allow you to fix the conflicts; after fixing conflicts, use `git add` to update the index with those contents, and then, instead of -running git-commit, just run +running `git commit`, just run ------------------------------------------------- $ git rebase --continue @@ -2508,7 +2508,7 @@ with $ git tag bad mywork~5 ------------------------------------------------- -(Either gitk or git-log may be useful for finding the commit.) +(Either gitk or `git log` may be useful for finding the commit.) Then check out that commit, edit it, and rebase the rest of the series on top of it (note that we could check out the commit on a temporary @@ -2549,12 +2549,12 @@ $ gitk origin..mywork & and browse through the list of patches in the mywork branch using gitk, applying them (possibly in a different order) to mywork-new using -cherry-pick, and possibly modifying them as you go using `commit --amend`. +cherry-pick, and possibly modifying them as you go using `git commit --amend`. The linkgit:git-gui[1] command may also help as it allows you to individually select diff hunks for inclusion in the index (by right-clicking on the diff hunk and choosing "Stage Hunk for Commit"). -Another technique is to use git-format-patch to create a series of +Another technique is to use `git format-patch` to create a series of patches, then reset the state to before the patches: ------------------------------------------------- @@ -2662,7 +2662,7 @@ you know is that D is bad, that Z is good, and that linkgit:git-bisect[1] identifies C as the culprit, how will you figure out that the problem is due to this change in semantics? -When the result of a git-bisect is a non-merge commit, you should +When the result of a `git bisect` is a non-merge commit, you should normally be able to discover the problem by examining just that commit. Developers can make this easy by breaking their changes into small self-contained commits. That won't help in the case above, however, @@ -2725,7 +2725,7 @@ master branch. In more detail: git fetch and fast-forwards --------------------------- -In the previous example, when updating an existing branch, "git-fetch" +In the previous example, when updating an existing branch, "git fetch" checks to make sure that the most recent commit on the remote branch is a descendant of the most recent commit on your copy of the branch before updating your copy of the branch to point at the new @@ -2751,7 +2751,7 @@ resulting in a situation like: o--o--o <-- new head of the branch ................................................ -In this case, "git-fetch" will fail, and print out a warning. +In this case, "git fetch" will fail, and print out a warning. In that case, you can still force git to update to the new head, as described in the following section. However, note that in the @@ -2760,7 +2760,7 @@ unless you've already created a reference of your own pointing to them. [[forcing-fetch]] -Forcing git-fetch to do non-fast-forward updates +Forcing git fetch to do non-fast-forward updates ------------------------------------------------ If git fetch fails because the new head of a branch is not a @@ -2865,8 +2865,8 @@ The Object Database We already saw in <<understanding-commits>> that all commits are stored under a 40-digit "object name". In fact, all the information needed to represent the history of a project is stored in objects with such names. -In each case the name is calculated by taking the SHA1 hash of the -contents of the object. The SHA1 hash is a cryptographic hash function. +In each case the name is calculated by taking the SHA-1 hash of the +contents of the object. The SHA-1 hash is a cryptographic hash function. What that means to us is that it is impossible to find two different objects with the same name. This has a number of advantages; among others: @@ -2877,10 +2877,10 @@ others: same content stored in two repositories will always be stored under the same name. - Git can detect errors when it reads an object, by checking that the - object's name is still the SHA1 hash of its contents. + object's name is still the SHA-1 hash of its contents. (See <<object-details>> for the details of the object formatting and -SHA1 calculation.) +SHA-1 calculation.) There are four different types of objects: "blob", "tree", "commit", and "tag". @@ -2926,9 +2926,9 @@ committer Junio C Hamano <gitster@pobox.com> 1187591163 -0700 As you can see, a commit is defined by: -- a tree: The SHA1 name of a tree object (as defined below), representing +- a tree: The SHA-1 name of a tree object (as defined below), representing the contents of a directory at a certain point in time. -- parent(s): The SHA1 name of some number of commits which represent the +- parent(s): The SHA-1 name of some number of commits which represent the immediately previous step(s) in the history of the project. The example above has one parent; merge commits may have more than one. A commit with no parents is called a "root" commit, and @@ -2977,13 +2977,13 @@ $ git ls-tree fb3a8bdd0ce ------------------------------------------------ As you can see, a tree object contains a list of entries, each with a -mode, object type, SHA1 name, and name, sorted by name. It represents +mode, object type, SHA-1 name, and name, sorted by name. It represents the contents of a single directory tree. The object type may be a blob, representing the contents of a file, or another tree, representing the contents of a subdirectory. Since trees -and blobs, like all other objects, are named by the SHA1 hash of their -contents, two trees have the same SHA1 name if and only if their +and blobs, like all other objects, are named by the SHA-1 hash of their +contents, two trees have the same SHA-1 name if and only if their contents (including, recursively, the contents of all subdirectories) are identical. This allows git to quickly determine the differences between two related tree objects, since it can ignore any entries with @@ -3029,15 +3029,15 @@ currently checked out. Trust ~~~~~ -If you receive the SHA1 name of a blob from one source, and its contents +If you receive the SHA-1 name of a blob from one source, and its contents from another (possibly untrusted) source, you can still trust that those -contents are correct as long as the SHA1 name agrees. This is because -the SHA1 is designed so that it is infeasible to find different contents +contents are correct as long as the SHA-1 name agrees. This is because +the SHA-1 is designed so that it is infeasible to find different contents that produce the same hash. -Similarly, you need only trust the SHA1 name of a top-level tree object +Similarly, you need only trust the SHA-1 name of a top-level tree object to trust the contents of the entire directory that it refers to, and if -you receive the SHA1 name of a commit from a trusted source, then you +you receive the SHA-1 name of a commit from a trusted source, then you can easily verify the entire history of commits reachable through parents of that commit, and all of those contents of the trees referred to by those commits. @@ -3049,7 +3049,7 @@ that you trust that commit, and the immutability of the history of commits tells others that they can trust the whole history. In other words, you can easily validate a whole archive by just -sending out a single email that tells the people the name (SHA1 hash) +sending out a single email that tells the people the name (SHA-1 hash) of the top commit, and digitally sign that email using something like GPG/PGP. @@ -3090,7 +3090,7 @@ How git stores objects efficiently: pack files ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Newly created objects are initially created in a file named after the -object's SHA1 hash (stored in .git/objects). +object's SHA-1 hash (stored in .git/objects). Unfortunately this system becomes inefficient once a project has a lot of objects. Try this on an old project: @@ -3131,7 +3131,7 @@ $ git prune to remove any of the "loose" objects that are now contained in the pack. This will also remove any unreferenced objects (which may be -created when, for example, you use "git-reset" to remove a commit). +created when, for example, you use "git reset" to remove a commit). You can verify that the loose objects are gone by looking at the .git/objects directory or by running @@ -3160,7 +3160,7 @@ branch still exists, as does everything it pointed to. The branch pointer itself just doesn't, since you replaced it with another one. There are also other situations that cause dangling objects. For -example, a "dangling blob" may arise because you did a "git-add" of a +example, a "dangling blob" may arise because you did a "git add" of a file, but then, before you actually committed it and made it part of the bigger picture, you changed something else in that file and committed that *updated* thing--the old state that you added originally ends up @@ -3210,7 +3210,7 @@ Usually, dangling blobs and trees aren't very interesting. They're almost always the result of either being a half-way mergebase (the blob will often even have the conflict markers from a merge in it, if you have had conflicting merges that you fixed up by hand), or simply -because you interrupted a "git-fetch" with ^C or something like that, +because you interrupted a "git fetch" with ^C or something like that, leaving _some_ of the new objects in the object database, but just dangling and useless. @@ -3225,9 +3225,9 @@ and they'll be gone. But you should only run "git prune" on a quiescent repository--it's kind of like doing a filesystem fsck recovery: you don't want to do that while the filesystem is mounted. -(The same is true of "git-fsck" itself, btw, but since -git-fsck never actually *changes* the repository, it just reports -on what it found, git-fsck itself is never "dangerous" to run. +(The same is true of "git fsck" itself, btw, but since +`git fsck` never actually *changes* the repository, it just reports +on what it found, `git fsck` itself is never 'dangerous' to run. Running it while somebody is actually changing the repository can cause confusing and scary messages, but it won't actually do anything bad. In contrast, running "git prune" while somebody is actively changing the @@ -3297,7 +3297,7 @@ $ git hash-object -w somedirectory/myfile ------------------------------------------------ which will create and store a blob object with the contents of -somedirectory/myfile, and output the sha1 of that object. if you're +somedirectory/myfile, and output the SHA-1 of that object. if you're extremely lucky it might be 4b9458b3786228369c63936db65827de3cc06200, in which case you've guessed right, and the corruption is fixed! @@ -3359,7 +3359,7 @@ The index ----------- The index is a binary file (generally kept in .git/index) containing a -sorted list of path names, each with permissions and the SHA1 of a blob +sorted list of path names, each with permissions and the SHA-1 of a blob object; linkgit:git-ls-files[1] can show you the contents of the index: ------------------------------------------------- @@ -3489,14 +3489,14 @@ done NOTE: Do not use local URLs here if you plan to publish your superproject! -See what files `git-submodule` created: +See what files `git submodule` created: ------------------------------------------------- $ ls -a . .. .git .gitmodules a b c d ------------------------------------------------- -The `git-submodule add <repo> <path>` command does a couple of things: +The `git submodule add <repo> <path>` command does a couple of things: - It clones the submodule from <repo> to the given <path> under the current directory and by default checks out the master branch. @@ -3542,7 +3542,7 @@ init` to add the submodule repository URLs to `.git/config`: $ git submodule init ------------------------------------------------- -Now use `git-submodule update` to clone the repositories and check out the +Now use `git submodule update` to clone the repositories and check out the commits specified in the superproject: ------------------------------------------------- @@ -3552,8 +3552,8 @@ $ ls -a . .. .git a.txt ------------------------------------------------- -One major difference between `git-submodule update` and `git-submodule add` is -that `git-submodule update` checks out a specific commit, rather than the tip +One major difference between `git submodule update` and `git submodule add` is +that `git submodule update` checks out a specific commit, rather than the tip of a branch. It's like checking out a tag: the head is detached, so you're not working on a branch. @@ -3754,7 +3754,7 @@ unsaved state that you might want to restore later!) your current index. Normal operation is just ------------------------------------------------- -$ git read-tree <sha1 of tree> +$ git read-tree <SHA-1 of tree> ------------------------------------------------- and your index file will now be equivalent to the tree that you saved @@ -3769,7 +3769,7 @@ You update your working directory from the index by "checking out" files. This is not a very common operation, since normally you'd just keep your files updated, and rather than write to your working directory, you'd tell the index files about the changes in your -working directory (i.e. `git-update-index`). +working directory (i.e. `git update-index`). However, if you decide to jump to a new version, or check out somebody else's version, or just restore a previous tree, you'd populate your @@ -3782,7 +3782,7 @@ $ git checkout-index filename or, if you want to check out all of the index, use `-a`. -NOTE! git-checkout-index normally refuses to overwrite old files, so +NOTE! `git checkout-index` normally refuses to overwrite old files, so if you have an old version of the tree already checked out, you will need to use the "-f" flag ('before' the "-a" flag or the filename) to 'force' the checkout. @@ -3820,7 +3820,7 @@ $ git commit-tree <tree> -p <parent> [-p <parent2> ..] and then giving the reason for the commit on stdin (either through redirection from a pipe or file, or by just typing it at the tty). -git-commit-tree will return the name of the object that represents +`git commit-tree` will return the name of the object that represents that commit, and you should save it away for later use. Normally, you'd commit a new `HEAD` state, and while git doesn't care where you save the note about that state, in practice we tend to just write the @@ -3889,7 +3889,7 @@ $ git cat-file blob|tree|commit|tag <objectname> to show its contents. NOTE! Trees have binary content, and as a result there is a special helper for showing that content, called -`git-ls-tree`, which turns the binary content into a more easily +`git ls-tree`, which turns the binary content into a more easily readable form. It's especially instructive to look at "commit" objects, since those @@ -3978,13 +3978,13 @@ $ git ls-files --unmerged ------------------------------------------------ Each line of the `git ls-files --unmerged` output begins with -the blob mode bits, blob SHA1, 'stage number', and the +the blob mode bits, blob SHA-1, 'stage number', and the filename. The 'stage number' is git's way to say which tree it came from: stage 1 corresponds to `$orig` tree, stage 2 `HEAD` tree, and stage3 `$target` tree. Earlier we said that trivial merges are done inside -`git-read-tree -m`. For example, if the file did not change +`git read-tree -m`. For example, if the file did not change from `$orig` to `HEAD` nor `$target`, or if the file changed from `$orig` to `HEAD` and `$orig` to `$target` the same way, obviously the final outcome is what is in `HEAD`. What the @@ -4011,20 +4011,20 @@ $ mv -f hello.c~2 hello.c $ git update-index hello.c ------------------------------------------------- -When a path is in the "unmerged" state, running `git-update-index` for +When a path is in the "unmerged" state, running `git update-index` for that path tells git to mark the path resolved. The above is the description of a git merge at the lowest level, to help you understand what conceptually happens under the hood. -In practice, nobody, not even git itself, runs `git-cat-file` three times -for this. There is a `git-merge-index` program that extracts the +In practice, nobody, not even git itself, runs `git cat-file` three times +for this. There is a `git merge-index` program that extracts the stages to temporary files and calls a "merge" script on it: ------------------------------------------------- $ git merge-index git-merge-one-file hello.c ------------------------------------------------- -and that is what higher level `git-merge -s resolve` is implemented with. +and that is what higher level `git merge -s resolve` is implemented with. [[hacking-git]] Hacking git @@ -4045,12 +4045,12 @@ objects). There are currently four different object types: "blob", Regardless of object type, all objects share the following characteristics: they are all deflated with zlib, and have a header that not only specifies their type, but also provides size information -about the data in the object. It's worth noting that the SHA1 hash +about the data in the object. It's worth noting that the SHA-1 hash that is used to name the object is the hash of the original data plus this header, so `sha1sum` 'file' does not match the object name for 'file'. (Historical note: in the dawn of the age of git the hash -was the sha1 of the 'compressed' object.) +was the SHA-1 of the 'compressed' object.) As a result, the general consistency of an object can always be tested independently of the contents or the type of the object: all objects can @@ -4061,7 +4061,7 @@ size> {plus} <byte\0> {plus} <binary object data>. The structured objects can further have their structure and connectivity to other objects verified. This is generally done with -the `git-fsck` program, which generates a full dependency graph +the `git fsck` program, which generates a full dependency graph of all objects, and verifies their internal consistency (in addition to just verifying their superficial consistency through the hash). @@ -4120,7 +4120,7 @@ functions like `get_sha1_basic()` or the likes. This is just to get you into the groove for the most libified part of Git: the revision walker. -Basically, the initial version of `git-log` was a shell script: +Basically, the initial version of `git log` was a shell script: ---------------------------------------------------------------- $ git-rev-list --pretty $(git-rev-parse --default HEAD "$@") | \ @@ -4129,20 +4129,20 @@ $ git-rev-list --pretty $(git-rev-parse --default HEAD "$@") | \ What does this mean? -`git-rev-list` is the original version of the revision walker, which +`git rev-list` is the original version of the revision walker, which _always_ printed a list of revisions to stdout. It is still functional, and needs to, since most new Git programs start out as scripts using -`git-rev-list`. +`git rev-list`. -`git-rev-parse` is not as important any more; it was only used to filter out +`git rev-parse` is not as important any more; it was only used to filter out options that were relevant for the different plumbing commands that were called by the script. -Most of what `git-rev-list` did is contained in `revision.c` and +Most of what `git rev-list` did is contained in `revision.c` and `revision.h`. It wraps the options in a struct named `rev_info`, which controls how and what revisions are walked, and more. -The original job of `git-rev-parse` is now taken by the function +The original job of `git rev-parse` is now taken by the function `setup_revisions()`, which parses the revisions and the common command line options for the revision walker. This information is stored in the struct `rev_info` for later consumption. You can do your own command line option @@ -4155,7 +4155,7 @@ just have a look at the first implementation of `cmd_log()`; call `git show v1.3.0{tilde}155^2{tilde}4` and scroll down to that function (note that you no longer need to call `setup_pager()` directly). -Nowadays, `git-log` is a builtin, which means that it is _contained_ in the +Nowadays, `git log` is a builtin, which means that it is _contained_ in the command `git`. The source side of a builtin is - a function called `cmd_<bla>`, typically defined in `builtin-<bla>.c`, @@ -4171,7 +4171,7 @@ since they share quite a bit of code. In that case, the commands which are _not_ named like the `.c` file in which they live have to be listed in `BUILT_INS` in the `Makefile`. -`git-log` looks more complicated in C than it does in the original script, +`git log` looks more complicated in C than it does in the original script, but that allows for a much greater flexibility and performance. Here again it is a good point to take a pause. @@ -4182,9 +4182,9 @@ the organization of Git (after you know the basic concepts). So, think about something which you are interested in, say, "how can I access a blob just knowing the object name of it?". The first step is to find a Git command with which you can do it. In this example, it is either -`git-show` or `git-cat-file`. +`git show` or `git cat-file`. -For the sake of clarity, let's stay with `git-cat-file`, because it +For the sake of clarity, let's stay with `git cat-file`, because it - is plumbing, and @@ -4198,7 +4198,7 @@ it does. ------------------------------------------------------------------ git_config(git_default_config); if (argc != 3) - usage("git-cat-file [-t|-s|-e|-p|<type>] <sha1>"); + usage("git cat-file [-t|-s|-e|-p|<type>] <sha1>"); if (get_sha1(argv[2], sha1)) die("Not a valid object name %s", argv[2]); ------------------------------------------------------------------ @@ -4243,10 +4243,10 @@ To find out how the result can be used, just read on in `cmd_cat_file()`: ----------------------------------- Sometimes, you do not know where to look for a feature. In many such cases, -it helps to search through the output of `git log`, and then `git-show` the +it helps to search through the output of `git log`, and then `git show` the corresponding commit. -Example: If you know that there was some test case for `git-bundle`, but +Example: If you know that there was some test case for `git bundle`, but do not remember where it was (yes, you _could_ `git grep bundle t/`, but that does not illustrate the point!): @@ -4530,7 +4530,7 @@ The basic requirements: - Whenever possible, section headings should clearly describe the task they explain how to do, in language that requires no more knowledge than necessary: for example, "importing patches into a project" rather - than "the git-am command" + than "the `git am` command" Think about how to create a clear chapter dependency graph that will allow people to get to important topics without necessarily reading |