diff options
Diffstat (limited to 't')
43 files changed, 1984 insertions, 226 deletions
diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh index 5aa8adcf9..75482254a 100644 --- a/t/lib-git-p4.sh +++ b/t/lib-git-p4.sh @@ -69,7 +69,7 @@ start_p4d() { ( cd "$db" && { - p4d -q -p $P4DPORT & + p4d -q -p $P4DPORT "$@" & echo $! >"$pidfile" } ) && diff --git a/t/t0021-conversion.sh b/t/t0021-conversion.sh index ca7d2a630..718efa04d 100755 --- a/t/t0021-conversion.sh +++ b/t/t0021-conversion.sh @@ -204,6 +204,16 @@ test_expect_success 'filtering large input to small output should use little mem GIT_MMAP_LIMIT=1m GIT_ALLOC_LIMIT=1m git add 30MB ' +test_expect_success 'filter that does not read is fine' ' + test-genrandom foo $((128 * 1024 + 1)) >big && + echo "big filter=epipe" >.gitattributes && + git config filter.epipe.clean "echo xyzzy" && + git add big && + git cat-file blob :big >actual && + echo xyzzy >expect && + test_cmp expect actual +' + test_expect_success EXPENSIVE 'filter large file' ' git config filter.largefile.smudge cat && git config filter.largefile.clean cat && @@ -216,4 +226,30 @@ test_expect_success EXPENSIVE 'filter large file' ' ! test -s err ' +test_expect_success "filter: clean empty file" ' + git config filter.in-repo-header.clean "echo cleaned && cat" && + git config filter.in-repo-header.smudge "sed 1d" && + + echo "empty-in-worktree filter=in-repo-header" >>.gitattributes && + >empty-in-worktree && + + echo cleaned >expected && + git add empty-in-worktree && + git show :empty-in-worktree >actual && + test_cmp expected actual +' + +test_expect_success "filter: smudge empty file" ' + git config filter.empty-in-repo.clean "cat >/dev/null" && + git config filter.empty-in-repo.smudge "echo smudged && cat" && + + echo "empty-in-repo filter=empty-in-repo" >>.gitattributes && + echo dead data walking >empty-in-repo && + git add empty-in-repo && + + echo smudged >expected && + git checkout-index --prefix=filtered- empty-in-repo && + test_cmp expected filtered-empty-in-repo +' + test_done diff --git a/t/t0027-auto-crlf.sh b/t/t0027-auto-crlf.sh index 452320df8..1a56e5e82 100755 --- a/t/t0027-auto-crlf.sh +++ b/t/t0027-auto-crlf.sh @@ -57,28 +57,35 @@ create_gitattributes () { check_warning () { case "$1" in - LF_CRLF) grep "LF will be replaced by CRLF" $2;; - CRLF_LF) grep "CRLF will be replaced by LF" $2;; - '') - >expect - grep "will be replaced by" $2 >actual - test_cmp expect actual - ;; - *) false ;; + LF_CRLF) echo "warning: LF will be replaced by CRLF" >"$2".expect ;; + CRLF_LF) echo "warning: CRLF will be replaced by LF" >"$2".expect ;; + '') >"$2".expect ;; + *) echo >&2 "Illegal 1": "$1" ; return false ;; esac + grep "will be replaced by" "$2" | sed -e "s/\(.*\) in [^ ]*$/\1/" >"$2".actual + test_cmp "$2".expect "$2".actual } -create_file_in_repo () { +commit_check_warn () { crlf=$1 attr=$2 lfname=$3 crlfname=$4 - lfmixcrlf=$5 - lfmixcr=$6 - crlfnul=$7 - create_gitattributes "$attr" && + repoMIX=$5 + lfmixcrlf=$6 + lfmixcr=$7 + crlfnul=$8 pfx=crlf_${crlf}_attr_${attr} - for f in LF CRLF LF_mix_CR CRLF_mix_LF CRLF_nul + # Special handling for repoMIX: It should already be in the repo + # with CRLF + f=repoMIX + fname=${pfx}_$f.txt + echo >.gitattributes && + cp $f $fname && + git -c core.autocrlf=false add $fname 2>"${pfx}_$f.err" && + git commit -m "repoMIX" && + create_gitattributes "$attr" && + for f in LF CRLF repoMIX LF_mix_CR CRLF_mix_LF LF_nul CRLF_nul do fname=${pfx}_$f.txt && cp $f $fname && @@ -109,7 +116,7 @@ check_files_in_repo () { } -check_files_in_ws () { +checkout_files () { eol=$1 crlf=$2 attr=$3 @@ -122,7 +129,7 @@ check_files_in_ws () { git config core.autocrlf $crlf && pfx=eol_${eol}_crlf_${crlf}_attr_${attr}_ && src=crlf_false_attr__ && - for f in LF CRLF LF_mix_CR CRLF_mix_LF CRLF_nul + for f in LF CRLF LF_mix_CR CRLF_mix_LF LF_nul do rm $src$f.txt && if test -z "$eol"; then @@ -144,8 +151,8 @@ check_files_in_ws () { test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=LF_mix_CR" " compare_ws_file $pfx $lfmixcr ${src}LF_mix_CR.txt " - test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=CRLF_nul" " - compare_ws_file $pfx $crlfnul ${src}CRLF_nul.txt + test_expect_success "checkout core.eol=$eol core.autocrlf=$crlf gitattributes=$attr file=LF_nul" " + compare_ws_file $pfx $crlfnul ${src}LF_nul.txt " } @@ -157,6 +164,7 @@ test_expect_success 'setup master' ' git commit -m "add .gitattributes" "" && printf "line1\nline2\nline3" >LF && printf "line1\r\nline2\r\nline3" >CRLF && + printf "line1\r\nline2\nline3" >repoMIX && printf "line1\r\nline2\nline3" >CRLF_mix_LF && printf "line1\nline2\rline3" >LF_mix_CR && printf "line1\r\nline2\rline3" >CRLF_mix_CR && @@ -169,40 +177,55 @@ test_expect_success 'setup master' ' warn_LF_CRLF="LF will be replaced by CRLF" warn_CRLF_LF="CRLF will be replaced by LF" -test_expect_success 'add files empty attr' ' - create_file_in_repo false "" "" "" "" "" "" && - create_file_in_repo true "" "LF_CRLF" "" "LF_CRLF" "" "" && - create_file_in_repo input "" "" "CRLF_LF" "CRLF_LF" "" "" +# WILC stands for "Warn if (this OS) converts LF into CRLF". +# WICL: Warn if CRLF becomes LF +# WAMIX: Mixed line endings: either CRLF->LF or LF->CRLF +if test_have_prereq NATIVE_CRLF +then + WILC=LF_CRLF + WICL= + WAMIX=LF_CRLF +else + WILC= + WICL=CRLF_LF + WAMIX=CRLF_LF +fi + +# attr LF CRLF repoMIX CRLFmixLF LFmixCR CRLFNUL +test_expect_success 'commit files empty attr' ' + commit_check_warn false "" "" "" "" "" "" "" && + commit_check_warn true "" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" "" && + commit_check_warn input "" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "" ' -test_expect_success 'add files attr=auto' ' - create_file_in_repo false "auto" "" "CRLF_LF" "CRLF_LF" "" "" && - create_file_in_repo true "auto" "LF_CRLF" "" "LF_CRLF" "" "" && - create_file_in_repo input "auto" "" "CRLF_LF" "CRLF_LF" "" "" +test_expect_success 'commit files attr=auto' ' + commit_check_warn false "auto" "$WILC" "$WICL" "$WAMIX" "$WAMIX" "" "" && + commit_check_warn true "auto" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" "" && + commit_check_warn input "auto" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "" ' -test_expect_success 'add files attr=text' ' - create_file_in_repo false "text" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && - create_file_in_repo true "text" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && - create_file_in_repo input "text" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" +test_expect_success 'commit files attr=text' ' + commit_check_warn false "text" "$WILC" "$WICL" "$WAMIX" "$WAMIX" "$WILC" "$WICL" && + commit_check_warn true "text" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "LF_CRLF" "" && + commit_check_warn input "text" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" ' -test_expect_success 'add files attr=-text' ' - create_file_in_repo false "-text" "" "" "" "" "" && - create_file_in_repo true "-text" "" "" "" "" "" && - create_file_in_repo input "-text" "" "" "" "" "" +test_expect_success 'commit files attr=-text' ' + commit_check_warn false "-text" "" "" "" "" "" "" && + commit_check_warn true "-text" "" "" "" "" "" "" && + commit_check_warn input "-text" "" "" "" "" "" "" ' -test_expect_success 'add files attr=lf' ' - create_file_in_repo false "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && - create_file_in_repo true "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && - create_file_in_repo input "lf" "" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" +test_expect_success 'commit files attr=lf' ' + commit_check_warn false "lf" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + commit_check_warn true "lf" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" && + commit_check_warn input "lf" "" "CRLF_LF" "CRLF_LF" "CRLF_LF" "" "CRLF_LF" ' -test_expect_success 'add files attr=crlf' ' - create_file_in_repo false "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && - create_file_in_repo true "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" && - create_file_in_repo input "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "" +test_expect_success 'commit files attr=crlf' ' + commit_check_warn false "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "LF_CRLF" "" && + commit_check_warn true "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "LF_CRLF" "" && + commit_check_warn input "crlf" "LF_CRLF" "" "LF_CRLF" "LF_CRLF" "LF_CRLF" "" ' test_expect_success 'create files cleanup' ' @@ -237,7 +260,7 @@ test_expect_success 'commit -text' ' ################################################################################ # Check how files in the repo are changed when they are checked out # How to read the table below: -# - check_files_in_ws will check multiple files with a combination of settings +# - checkout_files will check multiple files with a combination of settings # and attributes (core.autocrlf=input is forbidden with core.eol=crlf) # - parameter $1 : core.eol lf | crlf # - parameter $2 : core.autocrlf false | true | input @@ -249,87 +272,89 @@ test_expect_success 'commit -text' ' # - parameter $8 : reference for a file with CRLF and a NUL (should be handled as binary when auto) # What we have in the repo: -# ----------------- EOL in repo ---------------- -# LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul +# ----------------- EOL in repo ---------------- +# LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul # settings with checkout: # core. core. .gitattr # eol acrlf # ---------------------------------------------- # What we want to have in the working tree: -if test_have_prereq MINGW +if test_have_prereq NATIVE_CRLF then MIX_CRLF_LF=CRLF MIX_LF_CR=CRLF_mix_CR NL=CRLF +LFNUL=CRLF_nul else MIX_CRLF_LF=CRLF_mix_LF MIX_LF_CR=LF_mix_CR NL=LF +LFNUL=LF_nul fi export CRLF_MIX_LF_CR MIX NL -check_files_in_ws lf false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf input "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf false "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul -check_files_in_ws lf input "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf false "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws lf input "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf input "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf false "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf true "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf input "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws lf false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws lf true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws lf input "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul - -check_files_in_ws crlf false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws crlf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws crlf false "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul -check_files_in_ws crlf true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul -check_files_in_ws crlf false "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws crlf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws crlf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws crlf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws crlf false "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws crlf true "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws crlf false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws crlf true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul - -check_files_in_ws "" false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" input "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" false "auto" $NL CRLF $MIX_CRLF_LF LF_mix_CR CRLF_nul -check_files_in_ws "" true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul -check_files_in_ws "" input "auto" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" false "text" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR CRLF_nul -check_files_in_ws "" true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws "" input "text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" input "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" false "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" true "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" input "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws "" false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws "" true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws "" input "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul - -check_files_in_ws native false "" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws native true "" CRLF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws native false "auto" $NL CRLF $MIX_CRLF_LF LF_mix_CR CRLF_nul -check_files_in_ws native true "auto" CRLF CRLF CRLF LF_mix_CR CRLF_nul -check_files_in_ws native false "text" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR CRLF_nul -check_files_in_ws native true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws native false "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws native true "-text" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws native false "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws native true "lf" LF CRLF CRLF_mix_LF LF_mix_CR CRLF_nul -check_files_in_ws native false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul -check_files_in_ws native true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files lf false "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf input "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf false "auto" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf true "auto" CRLF CRLF CRLF LF_mix_CR LF_nul +checkout_files lf input "auto" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf false "text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files lf input "text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf input "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf false "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf true "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf input "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files lf false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files lf true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files lf input "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + +checkout_files crlf false "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files crlf true "" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files crlf false "auto" CRLF CRLF CRLF LF_mix_CR LF_nul +checkout_files crlf true "auto" CRLF CRLF CRLF LF_mix_CR LF_nul +checkout_files crlf false "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files crlf true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files crlf false "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files crlf true "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files crlf false "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files crlf true "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files crlf false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files crlf true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + +checkout_files "" false "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" true "" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" input "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" false "auto" $NL CRLF $MIX_CRLF_LF LF_mix_CR LF_nul +checkout_files "" true "auto" CRLF CRLF CRLF LF_mix_CR LF_nul +checkout_files "" input "auto" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" false "text" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR $LFNUL +checkout_files "" true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files "" input "text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" false "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" true "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" input "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" false "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" true "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" input "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files "" false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files "" true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files "" input "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul + +checkout_files native false "" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files native true "" CRLF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files native false "auto" $NL CRLF $MIX_CRLF_LF LF_mix_CR LF_nul +checkout_files native true "auto" CRLF CRLF CRLF LF_mix_CR LF_nul +checkout_files native false "text" $NL CRLF $MIX_CRLF_LF $MIX_LF_CR $LFNUL +checkout_files native true "text" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files native false "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files native true "-text" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files native false "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files native true "lf" LF CRLF CRLF_mix_LF LF_mix_CR LF_nul +checkout_files native false "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul +checkout_files native true "crlf" CRLF CRLF CRLF CRLF_mix_CR CRLF_nul test_done diff --git a/t/t0060-path-utils.sh b/t/t0060-path-utils.sh index c0143a0a7..93605f42f 100755 --- a/t/t0060-path-utils.sh +++ b/t/t0060-path-utils.sh @@ -19,6 +19,14 @@ relative_path() { "test \"\$(test-path-utils relative_path '$1' '$2')\" = '$expected'" } +test_git_path() { + test_expect_success "git-path $1 $2 => $3" " + $1 git rev-parse --git-path $2 >actual && + echo $3 >expect && + test_cmp expect actual + " +} + # On Windows, we are using MSYS's bash, which mangles the paths. # Absolute paths are anchored at the MSYS installation directory, # which means that the path / accounts for this many characters: @@ -244,4 +252,32 @@ relative_path "<null>" "<empty>" ./ relative_path "<null>" "<null>" ./ relative_path "<null>" /foo/a/b ./ +test_git_path A=B info/grafts .git/info/grafts +test_git_path GIT_GRAFT_FILE=foo info/grafts foo +test_git_path GIT_GRAFT_FILE=foo info/////grafts foo +test_git_path GIT_INDEX_FILE=foo index foo +test_git_path GIT_INDEX_FILE=foo index/foo .git/index/foo +test_git_path GIT_INDEX_FILE=foo index2 .git/index2 +test_expect_success 'setup fake objects directory foo' 'mkdir foo' +test_git_path GIT_OBJECT_DIRECTORY=foo objects foo +test_git_path GIT_OBJECT_DIRECTORY=foo objects/foo foo/foo +test_git_path GIT_OBJECT_DIRECTORY=foo objects2 .git/objects2 +test_expect_success 'setup common repository' 'git --git-dir=bar init' +test_git_path GIT_COMMON_DIR=bar index .git/index +test_git_path GIT_COMMON_DIR=bar HEAD .git/HEAD +test_git_path GIT_COMMON_DIR=bar logs/HEAD .git/logs/HEAD +test_git_path GIT_COMMON_DIR=bar objects bar/objects +test_git_path GIT_COMMON_DIR=bar objects/bar bar/objects/bar +test_git_path GIT_COMMON_DIR=bar info/exclude bar/info/exclude +test_git_path GIT_COMMON_DIR=bar info/grafts bar/info/grafts +test_git_path GIT_COMMON_DIR=bar info/sparse-checkout .git/info/sparse-checkout +test_git_path GIT_COMMON_DIR=bar remotes/bar bar/remotes/bar +test_git_path GIT_COMMON_DIR=bar branches/bar bar/branches/bar +test_git_path GIT_COMMON_DIR=bar logs/refs/heads/master bar/logs/refs/heads/master +test_git_path GIT_COMMON_DIR=bar refs/heads/master bar/refs/heads/master +test_git_path GIT_COMMON_DIR=bar hooks/me bar/hooks/me +test_git_path GIT_COMMON_DIR=bar config bar/config +test_git_path GIT_COMMON_DIR=bar packed-refs bar/packed-refs +test_git_path GIT_COMMON_DIR=bar shallow bar/shallow + test_done diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh index ab36b1eb7..93a479493 100755 --- a/t/t1006-cat-file.sh +++ b/t/t1006-cat-file.sh @@ -47,6 +47,18 @@ $content" test_cmp expect actual ' + test_expect_success "Type of $type is correct using --allow-unknown-type" ' + echo $type >expect && + git cat-file -t --allow-unknown-type $sha1 >actual && + test_cmp expect actual + ' + + test_expect_success "Size of $type is correct using --allow-unknown-type" ' + echo $size >expect && + git cat-file -s --allow-unknown-type $sha1 >actual && + test_cmp expect actual + ' + test -z "$content" || test_expect_success "Content of $type is correct" ' maybe_remove_timestamp "$content" $no_ts >expect && @@ -189,6 +201,13 @@ do ' done +for opt in t s e p +do + test_expect_success "Passing -$opt with --follow-symlinks fails" ' + test_must_fail git cat-file --follow-symlinks -$opt $hello_sha1 + ' +done + test_expect_success "--batch-check for a non-existent named object" ' test "foobar42 missing foobar84 missing" = \ @@ -296,4 +315,236 @@ test_expect_success '%(deltabase) reports packed delta bases' ' } ' +bogus_type="bogus" +bogus_content="bogus" +bogus_size=$(strlen "$bogus_content") +bogus_sha1=$(echo_without_newline "$bogus_content" | git hash-object -t $bogus_type --literally -w --stdin) + +test_expect_success "Type of broken object is correct" ' + echo $bogus_type >expect && + git cat-file -t --allow-unknown-type $bogus_sha1 >actual && + test_cmp expect actual +' + +test_expect_success "Size of broken object is correct" ' + echo $bogus_size >expect && + git cat-file -s --allow-unknown-type $bogus_sha1 >actual && + test_cmp expect actual +' +bogus_type="abcdefghijklmnopqrstuvwxyz1234679" +bogus_content="bogus" +bogus_size=$(strlen "$bogus_content") +bogus_sha1=$(echo_without_newline "$bogus_content" | git hash-object -t $bogus_type --literally -w --stdin) + +test_expect_success "Type of broken object is correct when type is large" ' + echo $bogus_type >expect && + git cat-file -t --allow-unknown-type $bogus_sha1 >actual && + test_cmp expect actual +' + +test_expect_success "Size of large broken object is correct when type is large" ' + echo $bogus_size >expect && + git cat-file -s --allow-unknown-type $bogus_sha1 >actual && + test_cmp expect actual +' + +# Tests for git cat-file --follow-symlinks +test_expect_success 'prep for symlink tests' ' + echo_without_newline "$hello_content" >morx && + test_ln_s_add morx same-dir-link && + test_ln_s_add dir link-to-dir && + test_ln_s_add ../fleem out-of-repo-link && + test_ln_s_add .. out-of-repo-link-dir && + test_ln_s_add same-dir-link link-to-link && + test_ln_s_add nope broken-same-dir-link && + mkdir dir && + test_ln_s_add ../morx dir/parent-dir-link && + test_ln_s_add .. dir/link-dir && + test_ln_s_add ../../escape dir/out-of-repo-link && + test_ln_s_add ../.. dir/out-of-repo-link-dir && + test_ln_s_add nope dir/broken-link-in-dir && + mkdir dir/subdir && + test_ln_s_add ../../morx dir/subdir/grandparent-dir-link && + test_ln_s_add ../../../great-escape dir/subdir/out-of-repo-link && + test_ln_s_add ../../.. dir/subdir/out-of-repo-link-dir && + test_ln_s_add ../../../ dir/subdir/out-of-repo-link-dir-trailing && + test_ln_s_add ../parent-dir-link dir/subdir/parent-dir-link-to-link && + echo_without_newline "$hello_content" >dir/subdir/ind2 && + echo_without_newline "$hello_content" >dir/ind1 && + test_ln_s_add dir dirlink && + test_ln_s_add dir/subdir subdirlink && + test_ln_s_add subdir/ind2 dir/link-to-child && + test_ln_s_add dir/link-to-child link-to-down-link && + test_ln_s_add dir/.. up-down && + test_ln_s_add dir/../ up-down-trailing && + test_ln_s_add dir/../morx up-down-file && + test_ln_s_add dir/../../morx up-up-down-file && + test_ln_s_add subdirlink/../../morx up-two-down-file && + test_ln_s_add loop1 loop2 && + test_ln_s_add loop2 loop1 && + git add morx dir/subdir/ind2 dir/ind1 && + git commit -am "test" && + echo $hello_sha1 blob $hello_size >found +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for non-links' ' + echo HEAD:morx | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual && + echo HEAD:nope missing >expect && + echo HEAD:nope | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for in-repo, same-dir links' ' + echo HEAD:same-dir-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for in-repo, links to dirs' ' + echo HEAD:link-to-dir/ind1 | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual +' + + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for broken in-repo, same-dir links' ' + echo dangling 25 >expect && + echo HEAD:broken-same-dir-link >>expect && + echo HEAD:broken-same-dir-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for same-dir links-to-links' ' + echo HEAD:link-to-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for parent-dir links' ' + echo HEAD:dir/parent-dir-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual && + echo notdir 29 >expect && + echo HEAD:dir/parent-dir-link/nope >>expect && + echo HEAD:dir/parent-dir-link/nope | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for .. links' ' + echo dangling 22 >expect && + echo HEAD:dir/link-dir/nope >>expect && + echo HEAD:dir/link-dir/nope | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo HEAD:dir/link-dir/morx | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual && + echo dangling 27 >expect && + echo HEAD:dir/broken-link-in-dir >>expect && + echo HEAD:dir/broken-link-in-dir | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for ../.. links' ' + echo notdir 41 >expect && + echo HEAD:dir/subdir/grandparent-dir-link/nope >>expect && + echo HEAD:dir/subdir/grandparent-dir-link/nope | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo HEAD:dir/subdir/grandparent-dir-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual && + echo HEAD:dir/subdir/parent-dir-link-to-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir/ links' ' + echo dangling 17 >expect && + echo HEAD:dirlink/morx >>expect && + echo HEAD:dirlink/morx | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo $hello_sha1 blob $hello_size >expect && + echo HEAD:dirlink/ind1 | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir/subdir links' ' + echo dangling 20 >expect && + echo HEAD:subdirlink/morx >>expect && + echo HEAD:subdirlink/morx | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo HEAD:subdirlink/ind2 | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for dir ->subdir links' ' + echo notdir 27 >expect && + echo HEAD:dir/link-to-child/morx >>expect && + echo HEAD:dir/link-to-child/morx | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo HEAD:dir/link-to-child | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual && + echo HEAD:link-to-down-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks' ' + echo symlink 8 >expect && + echo ../fleem >>expect && + echo HEAD:out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo symlink 2 >expect && + echo .. >>expect && + echo HEAD:out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks in dirs' ' + echo symlink 9 >expect && + echo ../escape >>expect && + echo HEAD:dir/out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo symlink 2 >expect && + echo .. >>expect && + echo HEAD:dir/out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for out-of-repo symlinks in subdirs' ' + echo symlink 15 >expect && + echo ../great-escape >>expect && + echo HEAD:dir/subdir/out-of-repo-link | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo symlink 2 >expect && + echo .. >>expect && + echo HEAD:dir/subdir/out-of-repo-link-dir | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo symlink 3 >expect && + echo ../ >>expect && + echo HEAD:dir/subdir/out-of-repo-link-dir-trailing | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlinks works for symlinks with internal ..' ' + echo HEAD: | git cat-file --batch-check >expect && + echo HEAD:up-down | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo HEAD:up-down-trailing | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo HEAD:up-down-file | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual && + echo symlink 7 >expect && + echo ../morx >>expect && + echo HEAD:up-up-down-file | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual && + echo HEAD:up-two-down-file | git cat-file --batch-check --follow-symlinks >actual && + test_cmp found actual +' + +test_expect_success 'git cat-file --batch-check --follow-symlink breaks loops' ' + echo loop 10 >expect && + echo HEAD:loop1 >>expect && + echo HEAD:loop1 | git cat-file --batch-check --follow-symlinks >actual && + test_cmp expect actual +' + +test_expect_success 'git cat-file --batch --follow-symlink returns correct sha and mode' ' + echo HEAD:morx | git cat-file --batch >expect && + echo HEAD:morx | git cat-file --batch --follow-symlinks >actual && + test_cmp expect actual +' + test_done diff --git a/t/t1430-bad-ref-name.sh b/t/t1430-bad-ref-name.sh index 468e85621..16d0b8bd1 100755 --- a/t/t1430-bad-ref-name.sh +++ b/t/t1430-bad-ref-name.sh @@ -68,6 +68,14 @@ test_expect_success 'branch -D cannot delete non-ref in .git dir' ' test_cmp expect .git/my-private-file ' +test_expect_success 'branch -D cannot delete ref in .git dir' ' + git rev-parse HEAD >.git/my-private-file && + git rev-parse HEAD >expect && + git branch foo/legit && + test_must_fail git branch -D foo////./././../../../my-private-file && + test_cmp expect .git/my-private-file +' + test_expect_success 'branch -D cannot delete absolute path' ' git branch -f extra && test_must_fail git branch -D "$(pwd)/.git/refs/heads/extra" && diff --git a/t/t1501-worktree.sh b/t/t1501-worktree.sh index 8f36aa9fc..cc5b870e5 100755 --- a/t/t1501-worktree.sh +++ b/t/t1501-worktree.sh @@ -346,4 +346,81 @@ test_expect_success 'relative $GIT_WORK_TREE and git subprocesses' ' test_cmp expected actual ' +test_expect_success 'Multi-worktree setup' ' + mkdir work && + mkdir -p repo.git/repos/foo && + cp repo.git/HEAD repo.git/index repo.git/repos/foo && + test_might_fail cp repo.git/sharedindex.* repo.git/repos/foo && + sane_unset GIT_DIR GIT_CONFIG GIT_WORK_TREE +' + +test_expect_success 'GIT_DIR set (1)' ' + echo "gitdir: repo.git/repos/foo" >gitfile && + echo ../.. >repo.git/repos/foo/commondir && + ( + cd work && + GIT_DIR=../gitfile git rev-parse --git-common-dir >actual && + test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test_cmp expect actual + ) +' + +test_expect_success 'GIT_DIR set (2)' ' + echo "gitdir: repo.git/repos/foo" >gitfile && + echo "$(pwd)/repo.git" >repo.git/repos/foo/commondir && + ( + cd work && + GIT_DIR=../gitfile git rev-parse --git-common-dir >actual && + test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test_cmp expect actual + ) +' + +test_expect_success 'Auto discovery' ' + echo "gitdir: repo.git/repos/foo" >.git && + echo ../.. >repo.git/repos/foo/commondir && + ( + cd work && + git rev-parse --git-common-dir >actual && + test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test_cmp expect actual && + echo haha >data1 && + git add data1 && + git ls-files --full-name :/ | grep data1 >actual && + echo work/data1 >expect && + test_cmp expect actual + ) +' + +test_expect_success '$GIT_DIR/common overrides core.worktree' ' + mkdir elsewhere && + git --git-dir=repo.git config core.worktree "$TRASH_DIRECTORY/elsewhere" && + echo "gitdir: repo.git/repos/foo" >.git && + echo ../.. >repo.git/repos/foo/commondir && + ( + cd work && + git rev-parse --git-common-dir >actual && + test-path-utils real_path "$TRASH_DIRECTORY/repo.git" >expect && + test_cmp expect actual && + echo haha >data2 && + git add data2 && + git ls-files --full-name :/ | grep data2 >actual && + echo work/data2 >expect && + test_cmp expect actual + ) +' + +test_expect_success '$GIT_WORK_TREE overrides $GIT_DIR/common' ' + echo "gitdir: repo.git/repos/foo" >.git && + echo ../.. >repo.git/repos/foo/commondir && + ( + cd work && + echo haha >data3 && + git --git-dir=../.git --work-tree=. add data3 && + git ls-files --full-name -- :/ | grep data3 >actual && + echo data3 >expect && + test_cmp expect actual + ) +' + test_done diff --git a/t/t1507-rev-parse-upstream.sh b/t/t1507-rev-parse-upstream.sh index 1978947c4..46ef1f22d 100755 --- a/t/t1507-rev-parse-upstream.sh +++ b/t/t1507-rev-parse-upstream.sh @@ -150,7 +150,7 @@ test_expect_success 'branch@{u} works when tracking a local branch' ' test_expect_success 'branch@{u} error message when no upstream' ' cat >expect <<-EOF && - fatal: No upstream configured for branch ${sq}non-tracking${sq} + fatal: no upstream configured for branch ${sq}non-tracking${sq} EOF error_message non-tracking@{u} 2>actual && test_i18ncmp expect actual @@ -158,7 +158,7 @@ test_expect_success 'branch@{u} error message when no upstream' ' test_expect_success '@{u} error message when no upstream' ' cat >expect <<-EOF && - fatal: No upstream configured for branch ${sq}master${sq} + fatal: no upstream configured for branch ${sq}master${sq} EOF test_must_fail git rev-parse --verify @{u} 2>actual && test_i18ncmp expect actual @@ -166,7 +166,7 @@ test_expect_success '@{u} error message when no upstream' ' test_expect_success 'branch@{u} error message with misspelt branch' ' cat >expect <<-EOF && - fatal: No such branch: ${sq}no-such-branch${sq} + fatal: no such branch: ${sq}no-such-branch${sq} EOF error_message no-such-branch@{u} 2>actual && test_i18ncmp expect actual @@ -183,7 +183,7 @@ test_expect_success '@{u} error message when not on a branch' ' test_expect_success 'branch@{u} error message if upstream branch not fetched' ' cat >expect <<-EOF && - fatal: Upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch + fatal: upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch EOF error_message bad-upstream@{u} 2>actual && test_i18ncmp expect actual diff --git a/t/t1510-repo-setup.sh b/t/t1510-repo-setup.sh index e1b2a99f1..33c1a587b 100755 --- a/t/t1510-repo-setup.sh +++ b/t/t1510-repo-setup.sh @@ -106,6 +106,7 @@ setup_env () { expect () { cat >"$1/expected" <<-EOF setup: git_dir: $2 + setup: git_common_dir: $2 setup: worktree: $3 setup: cwd: $4 setup: prefix: $5 diff --git a/t/t1514-rev-parse-push.sh b/t/t1514-rev-parse-push.sh new file mode 100755 index 000000000..7214f5b33 --- /dev/null +++ b/t/t1514-rev-parse-push.sh @@ -0,0 +1,63 @@ +#!/bin/sh + +test_description='test <branch>@{push} syntax' +. ./test-lib.sh + +resolve () { + echo "$2" >expect && + git rev-parse --symbolic-full-name "$1" >actual && + test_cmp expect actual +} + +test_expect_success 'setup' ' + git init --bare parent.git && + git init --bare other.git && + git remote add origin parent.git && + git remote add other other.git && + test_commit base && + git push origin HEAD && + git branch --set-upstream-to=origin/master master && + git branch --track topic origin/master && + git push origin topic && + git push other topic +' + +test_expect_success '@{push} with default=nothing' ' + test_config push.default nothing && + test_must_fail git rev-parse master@{push} +' + +test_expect_success '@{push} with default=simple' ' + test_config push.default simple && + resolve master@{push} refs/remotes/origin/master +' + +test_expect_success 'triangular @{push} fails with default=simple' ' + test_config push.default simple && + test_must_fail git rev-parse topic@{push} +' + +test_expect_success '@{push} with default=current' ' + test_config push.default current && + resolve topic@{push} refs/remotes/origin/topic +' + +test_expect_success '@{push} with default=matching' ' + test_config push.default matching && + resolve topic@{push} refs/remotes/origin/topic +' + +test_expect_success '@{push} with pushremote defined' ' + test_config push.default current && + test_config branch.topic.pushremote other && + resolve topic@{push} refs/remotes/other/topic +' + +test_expect_success '@{push} with push refspecs' ' + test_config push.default nothing && + test_config remote.origin.push refs/heads/*:refs/heads/magic/* && + git push && + resolve topic@{push} refs/remotes/origin/magic/topic +' + +test_done diff --git a/t/t2025-checkout-to.sh b/t/t2025-checkout-to.sh new file mode 100755 index 000000000..f8e4df481 --- /dev/null +++ b/t/t2025-checkout-to.sh @@ -0,0 +1,129 @@ +#!/bin/sh + +test_description='test git checkout --to' + +. ./test-lib.sh + +test_expect_success 'setup' ' + test_commit init +' + +test_expect_success 'checkout --to not updating paths' ' + test_must_fail git checkout --to -- init.t +' + +test_expect_success 'checkout --to an existing worktree' ' + mkdir -p existing/subtree && + test_must_fail git checkout --detach --to existing master +' + +test_expect_success 'checkout --to an existing empty worktree' ' + mkdir existing_empty && + git checkout --detach --to existing_empty master +' + +test_expect_success 'checkout --to refuses to checkout locked branch' ' + test_must_fail git checkout --to zere master && + ! test -d zere && + ! test -d .git/worktrees/zere +' + +test_expect_success 'checkout --to a new worktree' ' + git rev-parse HEAD >expect && + git checkout --detach --to here master && + ( + cd here && + test_cmp ../init.t init.t && + test_must_fail git symbolic-ref HEAD && + git rev-parse HEAD >actual && + test_cmp ../expect actual && + git fsck + ) +' + +test_expect_success 'checkout --to a new worktree from a subdir' ' + ( + mkdir sub && + cd sub && + git checkout --detach --to here master && + cd here && + test_cmp ../../init.t init.t + ) +' + +test_expect_success 'checkout --to from a linked checkout' ' + ( + cd here && + git checkout --detach --to nested-here master && + cd nested-here && + git fsck + ) +' + +test_expect_success 'checkout --to a new worktree creating new branch' ' + git checkout --to there -b newmaster master && + ( + cd there && + test_cmp ../init.t init.t && + git symbolic-ref HEAD >actual && + echo refs/heads/newmaster >expect && + test_cmp expect actual && + git fsck + ) +' + +test_expect_success 'die the same branch is already checked out' ' + ( + cd here && + test_must_fail git checkout newmaster + ) +' + +test_expect_success 'not die the same branch is already checked out' ' + ( + cd here && + git checkout --ignore-other-worktrees --to anothernewmaster newmaster + ) +' + +test_expect_success 'not die on re-checking out current branch' ' + ( + cd there && + git checkout newmaster + ) +' + +test_expect_success 'checkout --to from a bare repo' ' + ( + git clone --bare . bare && + cd bare && + git checkout --to ../there2 -b bare-master master + ) +' + +test_expect_success 'checkout from a bare repo without --to' ' + ( + cd bare && + test_must_fail git checkout master + ) +' + +test_expect_success 'checkout with grafts' ' + test_when_finished rm .git/info/grafts && + test_commit abc && + SHA1=`git rev-parse HEAD` && + test_commit def && + test_commit xyz && + echo "`git rev-parse HEAD` $SHA1" >.git/info/grafts && + cat >expected <<-\EOF && + xyz + abc + EOF + git log --format=%s -2 >actual && + test_cmp expected actual && + git checkout --detach --to grafted master && + git --git-dir=grafted/.git log --format=%s -2 >actual && + test_cmp expected actual +' + +test_done diff --git a/t/t2026-prune-linked-checkouts.sh b/t/t2026-prune-linked-checkouts.sh new file mode 100755 index 000000000..1821a480c --- /dev/null +++ b/t/t2026-prune-linked-checkouts.sh @@ -0,0 +1,96 @@ +#!/bin/sh + +test_description='prune $GIT_DIR/worktrees' + +. ./test-lib.sh + +test_expect_success initialize ' + git commit --allow-empty -m init +' + +test_expect_success 'prune --worktrees on normal repo' ' + git prune --worktrees && + test_must_fail git prune --worktrees abc +' + +test_expect_success 'prune files inside $GIT_DIR/worktrees' ' + mkdir .git/worktrees && + : >.git/worktrees/abc && + git prune --worktrees --verbose >actual && + cat >expect <<EOF && +Removing worktrees/abc: not a valid directory +EOF + test_i18ncmp expect actual && + ! test -f .git/worktrees/abc && + ! test -d .git/worktrees +' + +test_expect_success 'prune directories without gitdir' ' + mkdir -p .git/worktrees/def/abc && + : >.git/worktrees/def/def && + cat >expect <<EOF && +Removing worktrees/def: gitdir file does not exist +EOF + git prune --worktrees --verbose >actual && + test_i18ncmp expect actual && + ! test -d .git/worktrees/def && + ! test -d .git/worktrees +' + +test_expect_success SANITY 'prune directories with unreadable gitdir' ' + mkdir -p .git/worktrees/def/abc && + : >.git/worktrees/def/def && + : >.git/worktrees/def/gitdir && + chmod u-r .git/worktrees/def/gitdir && + git prune --worktrees --verbose >actual && + test_i18ngrep "Removing worktrees/def: unable to read gitdir file" actual && + ! test -d .git/worktrees/def && + ! test -d .git/worktrees +' + +test_expect_success 'prune directories with invalid gitdir' ' + mkdir -p .git/worktrees/def/abc && + : >.git/worktrees/def/def && + : >.git/worktrees/def/gitdir && + git prune --worktrees --verbose >actual && + test_i18ngrep "Removing worktrees/def: invalid gitdir file" actual && + ! test -d .git/worktrees/def && + ! test -d .git/worktrees +' + +test_expect_success 'prune directories with gitdir pointing to nowhere' ' + mkdir -p .git/worktrees/def/abc && + : >.git/worktrees/def/def && + echo "$(pwd)"/nowhere >.git/worktrees/def/gitdir && + git prune --worktrees --verbose >actual && + test_i18ngrep "Removing worktrees/def: gitdir file points to non-existent location" actual && + ! test -d .git/worktrees/def && + ! test -d .git/worktrees +' + +test_expect_success 'not prune locked checkout' ' + test_when_finished rm -r .git/worktrees && + mkdir -p .git/worktrees/ghi && + : >.git/worktrees/ghi/locked && + git prune --worktrees && + test -d .git/worktrees/ghi +' + +test_expect_success 'not prune recent checkouts' ' + test_when_finished rm -r .git/worktrees && + mkdir zz && + mkdir -p .git/worktrees/jlm && + echo "$(pwd)"/zz >.git/worktrees/jlm/gitdir && + rmdir zz && + git prune --worktrees --verbose --expire=2.days.ago && + test -d .git/worktrees/jlm +' + +test_expect_success 'not prune proper checkouts' ' + test_when_finished rm -r .git/worktrees && + git checkout "--to=$PWD/nop" --detach master && + git prune --worktrees && + test -d .git/worktrees/nop +' + +test_done diff --git a/t/t2203-add-intent.sh b/t/t2203-add-intent.sh index 2a4a749b4..7c641bfaf 100755 --- a/t/t2203-add-intent.sh +++ b/t/t2203-add-intent.sh @@ -5,10 +5,24 @@ test_description='Intent to add' . ./test-lib.sh test_expect_success 'intent to add' ' + test_commit 1 && + git rm 1.t && + echo hello >1.t && echo hello >file && echo hello >elif && git add -N file && - git add elif + git add elif && + git add -N 1.t +' + +test_expect_success 'git status' ' + git status --porcelain | grep -v actual >actual && + cat >expect <<-\EOF && + DA 1.t + A elif + A file + EOF + test_cmp expect actual ' test_expect_success 'check result of "add -N"' ' @@ -43,7 +57,8 @@ test_expect_success 'i-t-a entry is simply ignored' ' git add -N nitfol && git commit -m second && test $(git ls-tree HEAD -- nitfol | wc -l) = 0 && - test $(git diff --name-only HEAD -- nitfol | wc -l) = 1 + test $(git diff --name-only HEAD -- nitfol | wc -l) = 0 && + test $(git diff --name-only -- nitfol | wc -l) = 1 ' test_expect_success 'can commit with an unrelated i-t-a entry in index' ' @@ -72,13 +87,13 @@ test_expect_success 'cache-tree invalidates i-t-a paths' ' : >dir/bar && git add -N dir/bar && git diff --cached --name-only >actual && - echo dir/bar >expect && + >expect && test_cmp expect actual && git write-tree >/dev/null && git diff --cached --name-only >actual && - echo dir/bar >expect && + >expect && test_cmp expect actual ' diff --git a/t/t3033-merge-toplevel.sh b/t/t3033-merge-toplevel.sh new file mode 100755 index 000000000..46aadc410 --- /dev/null +++ b/t/t3033-merge-toplevel.sh @@ -0,0 +1,136 @@ +#!/bin/sh + +test_description='"git merge" top-level frontend' + +. ./test-lib.sh + +t3033_reset () { + git checkout -B master two && + git branch -f left three && + git branch -f right four +} + +test_expect_success setup ' + test_commit one && + git branch left && + git branch right && + test_commit two && + git checkout left && + test_commit three && + git checkout right && + test_commit four && + git checkout master +' + +# Local branches + +test_expect_success 'merge an octopus into void' ' + t3033_reset && + git checkout --orphan test && + git rm -fr . && + test_must_fail git merge left right && + test_must_fail git rev-parse --verify HEAD && + git diff --quiet && + test_must_fail git rev-parse HEAD +' + +test_expect_success 'merge an octopus, fast-forward (ff)' ' + t3033_reset && + git reset --hard one && + git merge left right && + # one is ancestor of three (left) and four (right) + test_must_fail git rev-parse --verify HEAD^3 && + git rev-parse HEAD^1 HEAD^2 | sort >actual && + git rev-parse three four | sort >expect && + test_cmp expect actual +' + +test_expect_success 'merge octopus, non-fast-forward (ff)' ' + t3033_reset && + git reset --hard one && + git merge --no-ff left right && + # one is ancestor of three (left) and four (right) + test_must_fail git rev-parse --verify HEAD^4 && + git rev-parse HEAD^1 HEAD^2 HEAD^3 | sort >actual && + git rev-parse one three four | sort >expect && + test_cmp expect actual +' + +test_expect_success 'merge octopus, fast-forward (does not ff)' ' + t3033_reset && + git merge left right && + # two (master) is not an ancestor of three (left) and four (right) + test_must_fail git rev-parse --verify HEAD^4 && + git rev-parse HEAD^1 HEAD^2 HEAD^3 | sort >actual && + git rev-parse two three four | sort >expect && + test_cmp expect actual +' + +test_expect_success 'merge octopus, non-fast-forward' ' + t3033_reset && + git merge --no-ff left right && + test_must_fail git rev-parse --verify HEAD^4 && + git rev-parse HEAD^1 HEAD^2 HEAD^3 | sort >actual && + git rev-parse two three four | sort >expect && + test_cmp expect actual +' + +# The same set with FETCH_HEAD + +test_expect_success 'merge FETCH_HEAD octopus into void' ' + t3033_reset && + git checkout --orphan test && + git rm -fr . && + git fetch . left right && + test_must_fail git merge FETCH_HEAD && + test_must_fail git rev-parse --verify HEAD && + git diff --quiet && + test_must_fail git rev-parse HEAD +' + +test_expect_success 'merge FETCH_HEAD octopus fast-forward (ff)' ' + t3033_reset && + git reset --hard one && + git fetch . left right && + git merge FETCH_HEAD && + # one is ancestor of three (left) and four (right) + test_must_fail git rev-parse --verify HEAD^3 && + git rev-parse HEAD^1 HEAD^2 | sort >actual && + git rev-parse three four | sort >expect && + test_cmp expect actual +' + +test_expect_success 'merge FETCH_HEAD octopus non-fast-forward (ff)' ' + t3033_reset && + git reset --hard one && + git fetch . left right && + git merge --no-ff FETCH_HEAD && + # one is ancestor of three (left) and four (right) + test_must_fail git rev-parse --verify HEAD^4 && + git rev-parse HEAD^1 HEAD^2 HEAD^3 | sort >actual && + git rev-parse one three four | sort >expect && + test_cmp expect actual +' + +test_expect_success 'merge FETCH_HEAD octopus fast-forward (does not ff)' ' + t3033_reset && + git fetch . left right && + git merge FETCH_HEAD && + # two (master) is not an ancestor of three (left) and four (right) + test_must_fail git rev-parse --verify HEAD^4 && + git rev-parse HEAD^1 HEAD^2 HEAD^3 | sort >actual && + git rev-parse two three four | sort >expect && + test_cmp expect actual +' + +test_expect_success 'merge FETCH_HEAD octopus non-fast-forward' ' + t3033_reset && + git fetch . left right && + git merge --no-ff FETCH_HEAD && + test_must_fail git rev-parse --verify HEAD^4 && + git rev-parse HEAD^1 HEAD^2 HEAD^3 | sort >actual && + git rev-parse two three four | sort >expect && + test_cmp expect actual +' + +test_done diff --git a/t/t3210-pack-refs.sh b/t/t3210-pack-refs.sh index aa9eb3a3e..8aae98d48 100755 --- a/t/t3210-pack-refs.sh +++ b/t/t3210-pack-refs.sh @@ -187,4 +187,21 @@ test_expect_success 'notice d/f conflict with existing ref' ' test_must_fail git branch foo/bar/baz/lots/of/extra/components ' +test_expect_success 'timeout if packed-refs.lock exists' ' + LOCK=.git/packed-refs.lock && + >"$LOCK" && + test_when_finished "rm -f $LOCK" && + test_must_fail git pack-refs --all --prune +' + +test_expect_success 'retry acquiring packed-refs.lock' ' + LOCK=.git/packed-refs.lock && + >"$LOCK" && + test_when_finished "wait; rm -f $LOCK" && + { + ( sleep 1 ; rm -f $LOCK ) & + } && + git -c core.packedrefstimeout=3000 pack-refs --all --prune +' + test_done diff --git a/t/t3402-rebase-merge.sh b/t/t3402-rebase-merge.sh index 5a27ec9b5..8f64505e4 100755 --- a/t/t3402-rebase-merge.sh +++ b/t/t3402-rebase-merge.sh @@ -47,7 +47,7 @@ test_expect_success setup ' ' test_expect_success 'reference merge' ' - git merge -s recursive "reference merge" HEAD master + git merge -s recursive -m "reference merge" master ' PRE_REBASE=$(git rev-parse test-rebase) diff --git a/t/t3701-add-interactive.sh b/t/t3701-add-interactive.sh index 24ddd8a70..deae948c7 100755 --- a/t/t3701-add-interactive.sh +++ b/t/t3701-add-interactive.sh @@ -326,15 +326,34 @@ test_expect_success 'split hunk "add -p (edit)"' ' # 2. Correct version applies the (not)edited version, and asks # about the next hunk, against which we say q and program # exits. - for a in s e q n q q - do - echo $a - done | + printf "%s\n" s e q n q q | EDITOR=: git add -p && git diff >actual && ! grep "^+15" actual ' +test_expect_failure 'split hunk "add -p (no, yes, edit)"' ' + cat >test <<-\EOF && + 5 + 10 + 20 + 21 + 30 + 31 + 40 + 50 + 60 + EOF + git reset && + # test sequence is s(plit), n(o), y(es), e(dit) + # q n q q is there to make sure we exit at the end. + printf "%s\n" s n y e q n q q | + EDITOR=: git add -p 2>error && + test_must_be_empty error && + git diff >actual && + ! grep "^+31" actual +' + test_expect_success 'patch mode ignores unmerged entries' ' git reset --hard && test_commit conflict && diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index 0746eeeff..7396ca991 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -100,6 +100,10 @@ test_expect_success 'unstashing in a subdirectory' ' ) ' +test_expect_success 'stash drop complains of extra options' ' + test_must_fail git stash drop --foo +' + test_expect_success 'drop top stash' ' git reset --hard && git stash list > stashlist1 && diff --git a/t/t3904-stash-patch.sh b/t/t3904-stash-patch.sh index 70655c184..38e730090 100755 --- a/t/t3904-stash-patch.sh +++ b/t/t3904-stash-patch.sh @@ -1,9 +1,15 @@ #!/bin/sh -test_description='git checkout --patch' +test_description='stash -p' . ./lib-patch-mode.sh -test_expect_success PERL 'setup' ' +if ! test_have_prereq PERL +then + skip_all='skipping stash -p tests, perl not available' + test_done +fi + +test_expect_success 'setup' ' mkdir dir && echo parent > dir/foo && echo dummy > bar && @@ -20,7 +26,7 @@ test_expect_success PERL 'setup' ' # note: order of files with unstaged changes: HEAD bar dir/foo -test_expect_success PERL 'saying "n" does nothing' ' +test_expect_success 'saying "n" does nothing' ' set_state HEAD HEADfile_work HEADfile_index && set_state dir/foo work index && (echo n; echo n; echo n) | test_must_fail git stash save -p && @@ -29,7 +35,7 @@ test_expect_success PERL 'saying "n" does nothing' ' verify_state dir/foo work index ' -test_expect_success PERL 'git stash -p' ' +test_expect_success 'git stash -p' ' (echo y; echo n; echo y) | git stash save -p && verify_state HEAD committed HEADfile_index && verify_saved_state bar && @@ -41,7 +47,7 @@ test_expect_success PERL 'git stash -p' ' verify_state dir/foo work head ' -test_expect_success PERL 'git stash -p --no-keep-index' ' +test_expect_success 'git stash -p --no-keep-index' ' set_state HEAD HEADfile_work HEADfile_index && set_state bar bar_work bar_index && set_state dir/foo work index && @@ -56,7 +62,7 @@ test_expect_success PERL 'git stash -p --no-keep-index' ' verify_state dir/foo work index ' -test_expect_success PERL 'git stash --no-keep-index -p' ' +test_expect_success 'git stash --no-keep-index -p' ' set_state HEAD HEADfile_work HEADfile_index && set_state bar bar_work bar_index && set_state dir/foo work index && @@ -71,8 +77,31 @@ test_expect_success PERL 'git stash --no-keep-index -p' ' verify_state dir/foo work index ' -test_expect_success PERL 'none of this moved HEAD' ' +test_expect_success 'none of this moved HEAD' ' verify_saved_head ' +test_expect_failure 'stash -p with split hunk' ' + git reset --hard && + cat >test <<-\EOF && + aaa + bbb + ccc + EOF + git add test && + git commit -m "initial" && + cat >test <<-\EOF && + aaa + added line 1 + bbb + added line 2 + ccc + EOF + printf "%s\n" s n y q | + test_might_fail git stash -p 2>error && + ! test_must_be_empty error && + grep "added line 1" test && + ! grep "added line 2" test +' + test_done diff --git a/t/t4011-diff-symlink.sh b/t/t4011-diff-symlink.sh index 13e7f621a..7452fce0d 100755 --- a/t/t4011-diff-symlink.sh +++ b/t/t4011-diff-symlink.sh @@ -139,11 +139,13 @@ test_expect_success SYMLINKS 'setup symlinks with attributes' ' test_expect_success SYMLINKS 'symlinks do not respect userdiff config by path' ' cat >expect <<-\EOF && diff --git a/file.bin b/file.bin - index e69de29..d95f3ad 100644 - Binary files a/file.bin and b/file.bin differ + new file mode 100644 + index 0000000..d95f3ad + Binary files /dev/null and b/file.bin differ diff --git a/link.bin b/link.bin - index e69de29..dce41ec 120000 - --- a/link.bin + new file mode 120000 + index 0000000..dce41ec + --- /dev/null +++ b/link.bin @@ -0,0 +1 @@ +file.bin diff --git a/t/t5407-post-rewrite-hook.sh b/t/t5407-post-rewrite-hook.sh index ea2e0d4b4..7a48236e8 100755 --- a/t/t5407-post-rewrite-hook.sh +++ b/t/t5407-post-rewrite-hook.sh @@ -61,10 +61,10 @@ test_expect_success 'git rebase' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD^) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -77,9 +77,9 @@ test_expect_success 'git rebase --skip' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -89,9 +89,9 @@ test_expect_success 'git rebase --skip the last one' ' test_must_fail git rebase --onto D A && git rebase --skip && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse E) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse E) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -103,10 +103,10 @@ test_expect_success 'git rebase -m' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD^) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -119,9 +119,9 @@ test_expect_success 'git rebase -m --skip' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -148,10 +148,10 @@ test_expect_success 'git rebase -i (unchanged)' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD^) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -163,9 +163,9 @@ test_expect_success 'git rebase -i (skip)' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -177,10 +177,10 @@ test_expect_success 'git rebase -i (squash)' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -189,10 +189,10 @@ test_expect_success 'git rebase -i (fixup without conflict)' ' clear_hook_input && FAKE_LINES="1 fixup 2" git rebase -i B && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' @@ -205,10 +205,27 @@ test_expect_success 'git rebase -i (double edit)' ' git add foo && git rebase --continue && echo rebase >expected.args && - cat >expected.data <<EOF && -$(git rev-parse C) $(git rev-parse HEAD^) -$(git rev-parse D) $(git rev-parse HEAD) -EOF + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF + verify_hook_input +' + +test_expect_success 'git rebase -i (exec)' ' + git reset --hard D && + clear_hook_input && + FAKE_LINES="edit 1 exec_false 2" git rebase -i B && + echo something >bar && + git add bar && + # Fails because of exec false + test_must_fail git rebase --continue && + git rebase --continue && + echo rebase >expected.args && + cat >expected.data <<-EOF && + $(git rev-parse C) $(git rev-parse HEAD^) + $(git rev-parse D) $(git rev-parse HEAD) + EOF verify_hook_input ' diff --git a/t/t5516-fetch-push.sh b/t/t5516-fetch-push.sh index 8a5f2363a..ec22c9844 100755 --- a/t/t5516-fetch-push.sh +++ b/t/t5516-fetch-push.sh @@ -1120,6 +1120,61 @@ test_expect_success 'fetch exact SHA1' ' ) ' +for configallowtipsha1inwant in true false +do + test_expect_success "shallow fetch reachable SHA1 (but not a ref), allowtipsha1inwant=$configallowtipsha1inwant" ' + mk_empty testrepo && + ( + cd testrepo && + git config uploadpack.allowtipsha1inwant $configallowtipsha1inwant && + git commit --allow-empty -m foo && + git commit --allow-empty -m bar + ) && + SHA1=$(git --git-dir=testrepo/.git rev-parse HEAD^) && + mk_empty shallow && + ( + cd shallow && + test_must_fail git fetch --depth=1 ../testrepo/.git $SHA1 && + git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && + git fetch --depth=1 ../testrepo/.git $SHA1 && + git cat-file commit $SHA1 + ) + ' + + test_expect_success "deny fetch unreachable SHA1, allowtipsha1inwant=$configallowtipsha1inwant" ' + mk_empty testrepo && + ( + cd testrepo && + git config uploadpack.allowtipsha1inwant $configallowtipsha1inwant && + git commit --allow-empty -m foo && + git commit --allow-empty -m bar && + git commit --allow-empty -m xyz + ) && + SHA1_1=$(git --git-dir=testrepo/.git rev-parse HEAD^^) && + SHA1_2=$(git --git-dir=testrepo/.git rev-parse HEAD^) && + SHA1_3=$(git --git-dir=testrepo/.git rev-parse HEAD) && + ( + cd testrepo && + git reset --hard $SHA1_2 && + git cat-file commit $SHA1_1 && + git cat-file commit $SHA1_3 + ) && + mk_empty shallow && + ( + cd shallow && + test_must_fail git fetch ../testrepo/.git $SHA1_3 && + test_must_fail git fetch ../testrepo/.git $SHA1_1 && + git --git-dir=../testrepo/.git config uploadpack.allowreachablesha1inwant true && + git fetch ../testrepo/.git $SHA1_1 && + git cat-file commit $SHA1_1 && + test_must_fail git cat-file commit $SHA1_2 && + git fetch ../testrepo/.git $SHA1_2 && + git cat-file commit $SHA1_2 && + test_must_fail git fetch ../testrepo/.git $SHA1_3 + ) + ' +done + test_expect_success 'fetch follows tags by default' ' mk_test testrepo heads/master && rm -fr src dst && diff --git a/t/t5520-pull.sh b/t/t5520-pull.sh index 227d29335..7efd45bc2 100755 --- a/t/t5520-pull.sh +++ b/t/t5520-pull.sh @@ -9,36 +9,27 @@ modify () { mv "$2.x" "$2" } -D=`pwd` - test_expect_success setup ' - echo file >file && git add file && git commit -a -m original - ' test_expect_success 'pulling into void' ' - mkdir cloned && - cd cloned && - git init && - git pull .. -' - -cd "$D" - -test_expect_success 'checking the results' ' + git init cloned && + ( + cd cloned && + git pull .. + ) && test -f file && test -f cloned/file && test_cmp file cloned/file ' test_expect_success 'pulling into void using master:master' ' - mkdir cloned-uho && + git init cloned-uho && ( cd cloned-uho && - git init && git pull .. master:master ) && test -f file && @@ -71,7 +62,6 @@ test_expect_success 'pulling into void does not overwrite staged files' ' ) ' - test_expect_success 'pulling into void does not remove new staged files' ' git init cloned-staged-new && ( @@ -86,6 +76,15 @@ test_expect_success 'pulling into void does not remove new staged files' ' ) ' +test_expect_success 'pulling into void must not create an octopus' ' + git init cloned-octopus && + ( + cd cloned-octopus && + test_must_fail git pull .. master master && + ! test -f file + ) +' + test_expect_success 'test . as a remote' ' git branch copy master && diff --git a/t/t5551-http-fetch-smart.sh b/t/t5551-http-fetch-smart.sh index 2b2931190..58207d882 100755 --- a/t/t5551-http-fetch-smart.sh +++ b/t/t5551-http-fetch-smart.sh @@ -218,27 +218,35 @@ test_expect_success 'transfer.hiderefs works over smart-http' ' git -C hidden.git rev-parse --verify b ' -test_expect_success 'create 2,000 tags in the repo' ' - ( - cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && - for i in $(test_seq 2000) +# create an arbitrary number of tags, numbered from tag-$1 to tag-$2 +create_tags () { + rm -f marks && + for i in $(test_seq "$1" "$2") do - echo "commit refs/heads/too-many-refs" - echo "mark :$i" - echo "committer git <git@example.com> $i +0000" - echo "data 0" - echo "M 644 inline bla.txt" - echo "data 4" - echo "bla" + # don't use here-doc, because it requires a process + # per loop iteration + echo "commit refs/heads/too-many-refs-$1" && + echo "mark :$i" && + echo "committer git <git@example.com> $i +0000" && + echo "data 0" && + echo "M 644 inline bla.txt" && + echo "data 4" && + echo "bla" && # make every commit dangling by always # rewinding the branch after each commit - echo "reset refs/heads/too-many-refs" - echo "from :1" + echo "reset refs/heads/too-many-refs-$1" && + echo "from :$1" done | git fast-import --export-marks=marks && # now assign tags to all the dangling commits we created above tag=$(perl -e "print \"bla\" x 30") && sed -e "s|^:\([^ ]*\) \(.*\)$|\2 refs/tags/$tag-\1|" <marks >>packed-refs +} + +test_expect_success 'create 2,000 tags in the repo' ' + ( + cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + create_tags 1 2000 ) ' @@ -259,5 +267,20 @@ test_expect_success 'large fetch-pack requests can be split across POSTs' ' test_line_count = 2 posts ' +test_expect_success EXPENSIVE 'http can handle enormous ref negotiation' ' + ( + cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + create_tags 2001 50000 + ) && + git -C too-many-refs fetch -q --tags && + ( + cd "$HTTPD_DOCUMENT_ROOT_PATH/repo.git" && + create_tags 50001 100000 + ) && + git -C too-many-refs fetch -q --tags && + git -C too-many-refs for-each-ref refs/tags >tags && + test_line_count = 100000 tags +' + stop_httpd test_done diff --git a/t/t6020-merge-df.sh b/t/t6020-merge-df.sh index 27c3d7396..2af1beec5 100755 --- a/t/t6020-merge-df.sh +++ b/t/t6020-merge-df.sh @@ -24,7 +24,7 @@ test_expect_success 'prepare repository' ' ' test_expect_success 'Merge with d/f conflicts' ' - test_expect_code 1 git merge "merge msg" B master + test_expect_code 1 git merge -m "merge msg" master ' test_expect_success 'F/D conflict' ' diff --git a/t/t6021-merge-criss-cross.sh b/t/t6021-merge-criss-cross.sh index d15b313d4..213deecab 100755 --- a/t/t6021-merge-criss-cross.sh +++ b/t/t6021-merge-criss-cross.sh @@ -48,7 +48,7 @@ echo "1 " > file && git commit -m "C3" file && git branch C3 && -git merge "pre E3 merge" B A && +git merge -m "pre E3 merge" A && echo "1 2 3 changed in E3, branch B. New file size @@ -61,7 +61,7 @@ echo "1 " > file && git commit -m "E3" file && git checkout A && -git merge "pre D8 merge" A C3 && +git merge -m "pre D8 merge" C3 && echo "1 2 3 changed in C3, branch B @@ -73,7 +73,7 @@ echo "1 9" > file && git commit -m D8 file' -test_expect_success 'Criss-cross merge' 'git merge "final merge" A B' +test_expect_success 'Criss-cross merge' 'git merge -m "final merge" B' cat > file-expect <<EOF 1 diff --git a/t/t6300-for-each-ref.sh b/t/t6300-for-each-ref.sh index c66bf7981..24fc2ba55 100755 --- a/t/t6300-for-each-ref.sh +++ b/t/t6300-for-each-ref.sh @@ -28,7 +28,10 @@ test_expect_success setup ' git update-ref refs/remotes/origin/master master && git remote add origin nowhere && git config branch.master.remote origin && - git config branch.master.merge refs/heads/master + git config branch.master.merge refs/heads/master && + git remote add myfork elsewhere && + git config remote.pushdefault myfork && + git config push.default current ' test_atom() { @@ -47,6 +50,7 @@ test_atom() { test_atom head refname refs/heads/master test_atom head upstream refs/remotes/origin/master +test_atom head push refs/remotes/myfork/master test_atom head objecttype commit test_atom head objectsize 171 test_atom head objectname $(git rev-parse refs/heads/master) @@ -83,6 +87,7 @@ test_atom head HEAD '*' test_atom tag refname refs/tags/testtag test_atom tag upstream '' +test_atom tag push '' test_atom tag objecttype tag test_atom tag objectsize 154 test_atom tag objectname $(git rev-parse refs/tags/testtag) @@ -347,6 +352,12 @@ test_expect_success 'Check that :track[short] works when upstream is invalid' ' test_cmp expected actual ' +test_expect_success '%(push) supports tracking specifiers, too' ' + echo "[ahead 1]" >expected && + git for-each-ref --format="%(push:track)" refs/heads >actual && + test_cmp expected actual +' + cat >expected <<EOF $(git rev-parse --short HEAD) EOF diff --git a/t/t7063-status-untracked-cache.sh b/t/t7063-status-untracked-cache.sh new file mode 100755 index 000000000..bd4806c12 --- /dev/null +++ b/t/t7063-status-untracked-cache.sh @@ -0,0 +1,357 @@ +#!/bin/sh + +test_description='test untracked cache' + +. ./test-lib.sh + +avoid_racy() { + sleep 1 +} + +# It's fine if git update-index returns an error code other than one, +# it'll be caught in the first test. +test_lazy_prereq UNTRACKED_CACHE ' + { git update-index --untracked-cache; ret=$?; } && + test $ret -ne 1 +' + +if ! test_have_prereq UNTRACKED_CACHE; then + skip_all='This system does not support untracked cache' + test_done +fi + +test_expect_success 'setup' ' + git init worktree && + cd worktree && + mkdir done dtwo dthree && + touch one two three done/one dtwo/two dthree/three && + git add one two done/one && + : >.git/info/exclude && + git update-index --untracked-cache +' + +test_expect_success 'untracked cache is empty' ' + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude 0000000000000000000000000000000000000000 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +EOF + test_cmp ../expect ../actual +' + +cat >../status.expect <<EOF && +A done/one +A one +A two +?? dthree/ +?? dtwo/ +?? three +EOF + +cat >../dump.expect <<EOF && +info/exclude e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ 0000000000000000000000000000000000000000 recurse valid +dthree/ +dtwo/ +three +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +three +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + +test_expect_success 'status first time (empty cache)' ' + avoid_racy && + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../actual && + test_cmp ../status.expect ../actual && + cat >../trace.expect <<EOF && +node creation: 3 +gitignore invalidation: 1 +directory invalidation: 0 +opendir: 4 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'untracked cache after first status' ' + test-dump-untracked-cache >../actual && + test_cmp ../dump.expect ../actual +' + +test_expect_success 'status second time (fully populated cache)' ' + avoid_racy && + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../actual && + test_cmp ../status.expect ../actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 0 +directory invalidation: 0 +opendir: 0 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'untracked cache after second status' ' + test-dump-untracked-cache >../actual && + test_cmp ../dump.expect ../actual +' + +test_expect_success 'modify in root directory, one dir invalidation' ' + avoid_racy && + : >four && + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../actual && + cat >../status.expect <<EOF && +A done/one +A one +A two +?? dthree/ +?? dtwo/ +?? four +?? three +EOF + test_cmp ../status.expect ../actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 0 +directory invalidation: 1 +opendir: 1 +EOF + test_cmp ../trace.expect ../trace + +' + +test_expect_success 'verify untracked cache dump' ' + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ 0000000000000000000000000000000000000000 recurse valid +dthree/ +dtwo/ +four +three +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +three +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_expect_success 'new .gitignore invalidates recursively' ' + avoid_racy && + echo four >.gitignore && + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../actual && + cat >../status.expect <<EOF && +A done/one +A one +A two +?? .gitignore +?? dthree/ +?? dtwo/ +?? three +EOF + test_cmp ../status.expect ../actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 1 +directory invalidation: 1 +opendir: 4 +EOF + test_cmp ../trace.expect ../trace + +' + +test_expect_success 'verify untracked cache dump' ' + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse valid +.gitignore +dthree/ +dtwo/ +three +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +three +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_expect_success 'new info/exclude invalidates everything' ' + avoid_racy && + echo three >>.git/info/exclude && + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../actual && + cat >../status.expect <<EOF && +A done/one +A one +A two +?? .gitignore +?? dtwo/ +EOF + test_cmp ../status.expect ../actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 1 +directory invalidation: 0 +opendir: 4 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'verify untracked cache dump' ' + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse valid +.gitignore +dtwo/ +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_expect_success 'move two from tracked to untracked' ' + git rm --cached two && + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_expect_success 'status after the move' ' + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../actual && + cat >../status.expect <<EOF && +A done/one +A one +?? .gitignore +?? dtwo/ +?? two +EOF + test_cmp ../status.expect ../actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 0 +directory invalidation: 0 +opendir: 1 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'verify untracked cache dump' ' + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse valid +.gitignore +dtwo/ +two +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_expect_success 'move two from untracked to tracked' ' + git add two && + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_expect_success 'status after the move' ' + : >../trace && + GIT_TRACE_UNTRACKED_STATS="$TRASH_DIRECTORY/trace" \ + git status --porcelain >../actual && + cat >../status.expect <<EOF && +A done/one +A one +A two +?? .gitignore +?? dtwo/ +EOF + test_cmp ../status.expect ../actual && + cat >../trace.expect <<EOF && +node creation: 0 +gitignore invalidation: 0 +directory invalidation: 0 +opendir: 1 +EOF + test_cmp ../trace.expect ../trace +' + +test_expect_success 'verify untracked cache dump' ' + test-dump-untracked-cache >../actual && + cat >../expect <<EOF && +info/exclude 13263c0978fb9fad16b2d580fb800b6d811c3ff0 +core.excludesfile 0000000000000000000000000000000000000000 +exclude_per_dir .gitignore +flags 00000006 +/ e6fcc8f2ee31bae321d66afd183fcb7237afae6e recurse valid +.gitignore +dtwo/ +/done/ 0000000000000000000000000000000000000000 recurse valid +/dthree/ 0000000000000000000000000000000000000000 recurse check_only valid +/dtwo/ 0000000000000000000000000000000000000000 recurse check_only valid +two +EOF + test_cmp ../expect ../actual +' + +test_done diff --git a/t/t7410-submodule-checkout-to.sh b/t/t7410-submodule-checkout-to.sh new file mode 100755 index 000000000..8f30aed6c --- /dev/null +++ b/t/t7410-submodule-checkout-to.sh @@ -0,0 +1,50 @@ +#!/bin/sh + +test_description='Combination of submodules and multiple workdirs' + +. ./test-lib.sh + +base_path=$(pwd -P) + +test_expect_success 'setup: make origin' \ + 'mkdir -p origin/sub && ( cd origin/sub && git init && + echo file1 >file1 && + git add file1 && + git commit -m file1 ) && + mkdir -p origin/main && ( cd origin/main && git init && + git submodule add ../sub && + git commit -m "add sub" ) && + ( cd origin/sub && + echo file1updated >file1 && + git add file1 && + git commit -m "file1 updated" ) && + ( cd origin/main/sub && git pull ) && + ( cd origin/main && + git add sub && + git commit -m "sub updated" )' + +test_expect_success 'setup: clone' \ + 'mkdir clone && ( cd clone && + git clone --recursive "$base_path/origin/main")' + +rev1_hash_main=$(git --git-dir=origin/main/.git show --pretty=format:%h -q "HEAD~1") +rev1_hash_sub=$(git --git-dir=origin/sub/.git show --pretty=format:%h -q "HEAD~1") + +test_expect_success 'checkout main' \ + 'mkdir default_checkout && + (cd clone/main && + git checkout --to "$base_path/default_checkout/main" "$rev1_hash_main")' + +test_expect_failure 'can see submodule diffs just after checkout' \ + '(cd default_checkout/main && git diff --submodule master"^!" | grep "file1 updated")' + +test_expect_success 'checkout main and initialize independed clones' \ + 'mkdir fully_cloned_submodule && + (cd clone/main && + git checkout --to "$base_path/fully_cloned_submodule/main" "$rev1_hash_main") && + (cd fully_cloned_submodule/main && git submodule update)' + +test_expect_success 'can see submodule diffs after independed cloning' \ + '(cd fully_cloned_submodule/main && git diff --submodule master"^!" | grep "file1 updated")' + +test_done diff --git a/t/t7502-commit.sh b/t/t7502-commit.sh index 051489ea3..2e0d55724 100755 --- a/t/t7502-commit.sh +++ b/t/t7502-commit.sh @@ -370,7 +370,7 @@ exit 0 EOF test_expect_success !AUTOIDENT 'do not fire editor when committer is bogus' ' - >.git/result + >.git/result && >expect && echo >>negative && diff --git a/t/t9402-git-cvsserver-refs.sh b/t/t9402-git-cvsserver-refs.sh index 1e266efff..d00df0873 100755 --- a/t/t9402-git-cvsserver-refs.sh +++ b/t/t9402-git-cvsserver-refs.sh @@ -496,7 +496,7 @@ test_expect_success 'check [cvswork3] diff' ' ' test_expect_success 'merge early [cvswork3] b3 with b1' ' - ( cd gitwork3 && git merge "message" HEAD b1 ) && + ( cd gitwork3 && git merge -m "message" b1 ) && git fetch gitwork3 b3:b3 && git tag v3merged b3 && git push --tags gitcvs.git b3:b3 diff --git a/t/t9801-git-p4-branch.sh b/t/t9801-git-p4-branch.sh index 2bf142d09..0aafd0333 100755 --- a/t/t9801-git-p4-branch.sh +++ b/t/t9801-git-p4-branch.sh @@ -504,6 +504,112 @@ test_expect_success 'use-client-spec detect-branches skips files in branches' ' ) ' +test_expect_success 'restart p4d' ' + kill_p4d && + start_p4d +' + +# +# 1: //depot/branch1/base/file1 +# //depot/branch1/base/file2 +# //depot/branch1/base/dir/sub_file1 +# 2: integrate //depot/branch1/base/... -> //depot/branch2/base/... +# 3: //depot/branch1/base/file3 +# 4: //depot/branch1/base/file2 (edit) +# 5: integrate //depot/branch1/base/... -> //depot/branch3/base/... +# +# Note: the client view removes the "base" folder from the workspace +# and moves sub_file1 one level up. +test_expect_success 'add simple p4 branches with common base folder on each branch' ' + ( + cd "$cli" && + client_view "//depot/branch1/base/... //client/branch1/..." \ + "//depot/branch1/base/dir/sub_file1 //client/branch1/sub_file1" \ + "//depot/branch2/base/... //client/branch2/..." \ + "//depot/branch3/base/... //client/branch3/..." && + mkdir -p branch1 && + cd branch1 && + echo file1 >file1 && + echo file2 >file2 && + mkdir dir && + echo sub_file1 >sub_file1 && + p4 add file1 file2 sub_file1 && + p4 submit -d "Create branch1" && + p4 integrate //depot/branch1/base/... //depot/branch2/base/... && + p4 submit -d "Integrate branch2 from branch1" && + echo file3 >file3 && + p4 add file3 && + p4 submit -d "add file3 in branch1" && + p4 open file2 && + echo update >>file2 && + p4 submit -d "update file2 in branch1" && + p4 integrate //depot/branch1/base/... //depot/branch3/base/... && + p4 submit -d "Integrate branch3 from branch1" + ) +' + +# Configure branches through git-config and clone them. +# All files are tested to make sure branches were cloned correctly. +# Finally, make an update to branch1 on P4 side to check if it is imported +# correctly by git p4. +# git p4 is expected to use the client view to also not include the common +# "base" folder in the imported directory structure. +test_expect_success 'git p4 clone simple branches with base folder on server side' ' + test_create_repo "$git" && + ( + cd "$git" && + git config git-p4.branchList branch1:branch2 && + git config --add git-p4.branchList branch1:branch3 && + git p4 clone --dest=. --use-client-spec --detect-branches //depot@all && + git log --all --graph --decorate --stat && + git reset --hard p4/depot/branch1 && + test -f file1 && + test -f file2 && + test -f file3 && + test -f sub_file1 && + grep update file2 && + git reset --hard p4/depot/branch2 && + test -f file1 && + test -f file2 && + test ! -f file3 && + test -f sub_file1 && + ! grep update file2 && + git reset --hard p4/depot/branch3 && + test -f file1 && + test -f file2 && + test -f file3 && + test -f sub_file1 && + grep update file2 && + cd "$cli" && + cd branch1 && + p4 edit file2 && + echo file2_ >>file2 && + p4 submit -d "update file2 in branch1" && + cd "$git" && + git reset --hard p4/depot/branch1 && + git p4 rebase && + grep file2_ file2 + ) +' + +# Now update a file in one of the branches in git and submit to P4 +test_expect_success 'Update a file in git side and submit to P4 using client view' ' + test_when_finished cleanup_git && + ( + cd "$git" && + git reset --hard p4/depot/branch1 && + echo "client spec" >> file1 && + git add -u . && + git commit -m "update file1 in branch1" && + git config git-p4.skipSubmitEdit true && + git p4 submit --verbose && + cd "$cli" && + p4 sync ... && + cd branch1 && + grep "client spec" file1 + ) +' + test_expect_success 'kill p4d' ' kill_p4d ' diff --git a/t/t9803-git-p4-shell-metachars.sh b/t/t9803-git-p4-shell-metachars.sh index fbacff34f..d950c7d66 100755 --- a/t/t9803-git-p4-shell-metachars.sh +++ b/t/t9803-git-p4-shell-metachars.sh @@ -28,7 +28,7 @@ test_expect_success 'shell metachars in filenames' ' echo f2 >"file with spaces" && git add "file with spaces" && git commit -m "add files" && - P4EDITOR=touch git p4 submit + P4EDITOR="test-chmtime +5" git p4 submit ) && ( cd "$cli" && @@ -47,7 +47,7 @@ test_expect_success 'deleting with shell metachars' ' git rm foo\$bar && git rm file\ with\ spaces && git commit -m "remove files" && - P4EDITOR=touch git p4 submit + P4EDITOR="test-chmtime +5" git p4 submit ) && ( cd "$cli" && diff --git a/t/t9805-git-p4-skip-submit-edit.sh b/t/t9805-git-p4-skip-submit-edit.sh index 89311886d..5fbf904dc 100755 --- a/t/t9805-git-p4-skip-submit-edit.sh +++ b/t/t9805-git-p4-skip-submit-edit.sh @@ -90,7 +90,7 @@ test_expect_success 'no config, edited' ' cd "$git" && echo line >>file1 && git commit -a -m "change 5" && - P4EDITOR="$TRASH_DIRECTORY/ed.sh" && + P4EDITOR="\"$TRASH_DIRECTORY/ed.sh\"" && export P4EDITOR && git p4 submit && p4 changes //depot/... >wc && diff --git a/t/t9813-git-p4-preserve-users.sh b/t/t9813-git-p4-preserve-users.sh index 166b840bf..0fe231280 100755 --- a/t/t9813-git-p4-preserve-users.sh +++ b/t/t9813-git-p4-preserve-users.sh @@ -53,7 +53,9 @@ test_expect_success 'preserve users' ' git commit --author "Alice <alice@example.com>" -m "a change by alice" file1 && git commit --author "Bob <bob@example.com>" -m "a change by bob" file2 && git config git-p4.skipSubmitEditCheck true && - P4EDITOR=touch P4USER=alice P4PASSWD=secret git p4 commit --preserve-user && + P4EDITOR="test-chmtime +5" P4USER=alice P4PASSWD=secret && + export P4EDITOR P4USER P4PASSWD && + git p4 commit --preserve-user && p4_check_commit_author file1 alice && p4_check_commit_author file2 bob ) @@ -69,7 +71,7 @@ test_expect_success 'refuse to preserve users without perms' ' git config git-p4.skipSubmitEditCheck true && echo "username-noperms: a change by alice" >>file1 && git commit --author "Alice <alice@example.com>" -m "perms: a change by alice" file1 && - P4EDITOR=touch P4USER=bob P4PASSWD=secret && + P4EDITOR="test-chmtime +5" P4USER=bob P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && test_must_fail git p4 commit --preserve-user && ! git diff --exit-code HEAD..p4/master @@ -87,7 +89,7 @@ test_expect_success 'preserve user where author is unknown to p4' ' git commit --author "Bob <bob@example.com>" -m "preserve: a change by bob" file1 && echo "username-unknown: a change by charlie" >>file1 && git commit --author "Charlie <charlie@example.com>" -m "preserve: a change by charlie" file1 && - P4EDITOR=touch P4USER=alice P4PASSWD=secret && + P4EDITOR="test-chmtime +5" P4USER=alice P4PASSWD=secret && export P4EDITOR P4USER P4PASSWD && test_must_fail git p4 commit --preserve-user && ! git diff --exit-code HEAD..p4/master && diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh index 99bb71b89..c89992cf9 100755 --- a/t/t9814-git-p4-rename.sh +++ b/t/t9814-git-p4-rename.sh @@ -226,14 +226,9 @@ test_expect_success 'detect copies' ' # See if configurables can be set, and in particular if the run.move.allow # variable exists, which allows admins to disable the "p4 move" command. -test_expect_success 'p4 configure command and run.move.allow are available' ' - p4 configure show run.move.allow >out ; retval=$? && - test $retval = 0 && - { - egrep ^run.move.allow: out && - test_set_prereq P4D_HAVE_CONFIGURABLE_RUN_MOVE_ALLOW || - true - } || true +test_lazy_prereq P4D_HAVE_CONFIGURABLE_RUN_MOVE_ALLOW ' + p4 configure show run.move.allow >out && + egrep ^run.move.allow: out ' # If move can be disabled, turn it off and test p4 move handling diff --git a/t/t9816-git-p4-locked.sh b/t/t9816-git-p4-locked.sh index e71e54334..d048bd33f 100755 --- a/t/t9816-git-p4-locked.sh +++ b/t/t9816-git-p4-locked.sh @@ -35,13 +35,13 @@ test_expect_success 'edit with lock not taken' ' ) ' -test_expect_failure 'add with lock not taken' ' +test_expect_success 'add with lock not taken' ' test_when_finished cleanup_git && git p4 clone --dest="$git" //depot && ( cd "$git" && echo line1 >>add-lock-not-taken && - git add file2 && + git add add-lock-not-taken && git commit -m "add add-lock-not-taken" && git config git-p4.skipSubmitEdit true && git p4 submit --verbose @@ -107,7 +107,7 @@ test_expect_failure 'chmod with lock taken' ' ) ' -test_expect_failure 'copy with lock taken' ' +test_expect_success 'copy with lock taken' ' lock_in_another_client && test_when_finished cleanup_git && test_when_finished "cd \"$cli\" && p4 revert file2 && rm -f file2" && @@ -130,8 +130,8 @@ test_expect_failure 'move with lock taken' ' git p4 clone --dest="$git" //depot && ( cd "$git" && - git mv file1 file2 && - git commit -m "mv file1 to file2" && + git mv file1 file3 && + git commit -m "mv file1 to file3" && git config git-p4.skipSubmitEdit true && git config git-p4.detectRenames true && git p4 submit --verbose diff --git a/t/t9818-git-p4-block.sh b/t/t9818-git-p4-block.sh new file mode 100755 index 000000000..153b20afb --- /dev/null +++ b/t/t9818-git-p4-block.sh @@ -0,0 +1,64 @@ +#!/bin/sh + +test_description='git p4 fetching changes in multiple blocks' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'Create a repo with ~100 changes' ' + ( + cd "$cli" && + >file.txt && + p4 add file.txt && + p4 submit -d "Add file.txt" && + for i in $(test_seq 0 9) + do + >outer$i.txt && + p4 add outer$i.txt && + p4 submit -d "Adding outer$i.txt" && + for j in $(test_seq 0 9) + do + p4 edit file.txt && + echo $i$j >file.txt && + p4 submit -d "Commit $i$j" || exit + done || exit + done + ) +' + +test_expect_success 'Clone the repo' ' + git p4 clone --dest="$git" --changes-block-size=10 --verbose //depot@all +' + +test_expect_success 'All files are present' ' + echo file.txt >expected && + test_write_lines outer0.txt outer1.txt outer2.txt outer3.txt outer4.txt >>expected && + test_write_lines outer5.txt outer6.txt outer7.txt outer8.txt outer9.txt >>expected && + ls "$git" >current && + test_cmp expected current +' + +test_expect_success 'file.txt is correct' ' + echo 99 >expected && + test_cmp expected "$git/file.txt" +' + +test_expect_success 'Correct number of commits' ' + (cd "$git" && git log --oneline) >log && + test_line_count = 111 log +' + +test_expect_success 'Previous version of file.txt is correct' ' + (cd "$git" && git checkout HEAD^^) && + echo 97 >expected && + test_cmp expected "$git/file.txt" +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9819-git-p4-case-folding.sh b/t/t9819-git-p4-case-folding.sh new file mode 100755 index 000000000..78f1d0f92 --- /dev/null +++ b/t/t9819-git-p4-case-folding.sh @@ -0,0 +1,54 @@ +#!/bin/sh + +test_description='interaction with P4 case-folding' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d with case folding enabled' ' + start_p4d -C1 +' + +test_expect_success 'Create a repo, name is lowercase' ' + ( + client_view "//depot/... //client/..." && + cd "$cli" && + mkdir -p lc UC && + >lc/file.txt && >UC/file.txt && + p4 add lc/file.txt UC/file.txt && + p4 submit -d "Add initial lc and UC repos" + ) +' + +test_expect_success 'Check p4 is in case-folding mode' ' + ( + cd "$cli" && + >lc/FILE.TXT && + p4 add lc/FILE.TXT && + test_must_fail p4 submit -d "Cannot add file differing only in case" lc/FILE.TXT + ) +' + +# Check we created the repo properly +test_expect_success 'Clone lc repo using lc name' ' + git p4 clone //depot/lc/... && + test_path_is_file lc/file.txt && + git p4 clone //depot/UC/... && + test_path_is_file UC/file.txt +' + +# The clone should fail, since there is no repo called LC, but because +# we have case-insensitive p4d enabled, it appears to go ahead and work, +# but leaves an empty git repo in place. +test_expect_failure 'Clone lc repo using uc name' ' + test_must_fail git p4 clone //depot/LC/... +' + +test_expect_failure 'Clone UC repo with lc name' ' + test_must_fail git p4 clone //depot/uc/... +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9820-git-p4-editor-handling.sh b/t/t9820-git-p4-editor-handling.sh new file mode 100755 index 000000000..6dc6df032 --- /dev/null +++ b/t/t9820-git-p4-editor-handling.sh @@ -0,0 +1,38 @@ +#!/bin/sh + +test_description='git p4 handling of EDITOR' + +. ./lib-git-p4.sh + +test_expect_success 'start p4d' ' + start_p4d +' + +test_expect_success 'init depot' ' + ( + cd "$cli" && + echo file1 >file1 && + p4 add file1 && + p4 submit -d "file1" + ) +' + +# Check that the P4EDITOR argument can be given command-line +# options, which git-p4 will then pass through to the shell. +test_expect_success 'EDITOR with options' ' + git p4 clone --dest="$git" //depot && + test_when_finished cleanup_git && + ( + cd "$git" && + echo change >file1 && + git commit -m "change" file1 && + P4EDITOR=": >\"$git/touched\" && test-chmtime +5" git p4 submit && + test_path_is_file "$git/touched" + ) +' + +test_expect_success 'kill p4d' ' + kill_p4d +' + +test_done diff --git a/t/t9902-completion.sh b/t/t9902-completion.sh index 4a14a5892..2ba62fbc1 100755 --- a/t/t9902-completion.sh +++ b/t/t9902-completion.sh @@ -370,6 +370,40 @@ test_expect_success '__git_remotes - list remotes from $GIT_DIR/remotes and from test_cmp expect actual ' +test_expect_success '__git_get_config_variables' ' + cat >expect <<-EOF && + name-1 + name-2 + EOF + test_config interesting.name-1 good && + test_config interesting.name-2 good && + test_config subsection.interesting.name-3 bad && + __git_get_config_variables interesting >actual && + test_cmp expect actual +' + +test_expect_success '__git_pretty_aliases' ' + cat >expect <<-EOF && + author + hash + EOF + test_config pretty.author "%an %ae" && + test_config pretty.hash %H && + __git_pretty_aliases >actual && + test_cmp expect actual +' + +test_expect_success '__git_aliases' ' + cat >expect <<-EOF && + ci + co + EOF + test_config alias.ci commit && + test_config alias.co checkout && + __git_aliases >actual && + test_cmp expect actual +' + test_expect_success 'basic' ' run_completion "git " && # built-in diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh index 8f8858a5f..e8d3c0fdb 100644 --- a/t/test-lib-functions.sh +++ b/t/test-lib-functions.sh @@ -348,11 +348,18 @@ test_declared_prereq () { return 1 } +test_verify_prereq () { + test -z "$test_prereq" || + expr >/dev/null "$test_prereq" : '[A-Z0-9_,!]*$' || + error "bug in the test script: '$test_prereq' does not look like a prereq" +} + test_expect_failure () { test_start_ test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-failure" + test_verify_prereq export test_prereq if ! test_skip "$@" then @@ -372,6 +379,7 @@ test_expect_success () { test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-success" + test_verify_prereq export test_prereq if ! test_skip "$@" then @@ -400,6 +408,7 @@ test_external () { error >&5 "bug in the test script: not 3 or 4 parameters to test_external" descr="$1" shift + test_verify_prereq export test_prereq if ! test_skip "$descr" "$@" then diff --git a/t/test-lib.sh b/t/test-lib.sh index 4ea99a209..39da9c2d9 100644 --- a/t/test-lib.sh +++ b/t/test-lib.sh @@ -529,7 +529,7 @@ test_run_ () { test_cleanup=: expecting_failure=$2 - if test "${GIT_TEST_CHAIN_LINT:-0}" != 0; then + if test "${GIT_TEST_CHAIN_LINT:-1}" != 0; then # 117 is magic because it is unlikely to match the exit # code of other programs test_eval_ "(exit 117) && $1" |