| Commit message (Collapse) | Author | Age |
|---|
| |\
| |
| |
| |
| |
| | |
# By Alexander Strasser
* as/diff-shortstat-ignore-binary:
diff: Only count lines in show_shortstats
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Do not mix byte and line counts. Binary files have byte counts;
skip them when accumulating line insertions/deletions.
The regression was introduced in e18872b.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
"git diff --stat" used to fully count a binary file with modified
execution bits whose contents is unmodified, which was not right.
By Zbigniew Jędrzejewski-Szmek (4) and Johannes Sixt (1)
* zj/diff-empty-chmod:
t4006: Windows do not have /dev/zero
diff --stat: do not run diff on indentical files
diff --stat: report mode-only changes for binary files like text files
tests: check --[short]stat output after chmod
test: modernize style of t4006
Conflicts:
diff.c
|
| | |/
| |
| |
| |
| |
| |
| | |
If two objects are known to be equal, there is no point running the diff.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Mode-only changes to binary files without content change were reported as
if they were rewritten, but text files in the same situation were reported
as "unchanged". Let's treat binary files like text files here, and simply
say that they are unchanged.
Output of --shortstat is modified in the same way.
Reported-by: Martin Mareš <mj@ucw.cz>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Spend only minimum number of columns necessary to show the number of lines
in the output from "diff --stat", instead of always allocating 4 columns
even when showing changes that are much smaller than 1000 lines.
By Zbigniew Jędrzejewski-Szmek
* zj/diff-stat-smaller-num-columns:
diff --stat: use less columns for change counts
|
| | |/
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| |/
|/|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (2)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
|
| | |
| |
| |
| |
| |
| |
| | |
Update tests in t4052 fixed by this change.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The recent change to compute the width of diff --stat did not take into
consideration the output from --graph. The consequence is that when both
options are used, e.g. in 'log --stat --graph', the lines are too long.
Adjust stat width calculations to take --graph output into account.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Output from "git log --graph --stat -p" broke the ancestry graph lines
with a single empty line between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |\ \
| | | |
| | | |
| | | |
| | | | |
* jc/maint-diffstat-numstat-context:
diff: teach --stat/--numstat to honor -U$num
|
| | |\ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
* rs/diff-cleanup-records-fix:
diff: resurrect XDF_NEED_MINIMAL with --minimal
Revert removal of multi-match discard heuristic in 27af01
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Forbids rename detection logic from matching two empty files as renames
during merge-recursive to prevent mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
|
| | | |_|_|/
| |/| | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Our rename detection is a heuristic, matching pairs of
removed and added files with similar or identical content.
It's unlikely to be wrong when there is actual content to
compare, and we already take care not to do inexact rename
detection when there is not enough content to produce good
results.
However, we always do exact rename detection, even when the
blob is tiny or empty. It's easy to get false positives with
an empty blob, simply because it is an obvious content to
use as a boilerplate (e.g., when telling git that an empty
directory is worth tracking via an empty .gitignore).
This patch lets callers specify whether or not they are
interested in using empty files as rename sources and
destinations. The default is "yes", keeping the original
behavior. It works by detecting the empty-blob sha1 for
rename sources and destinations.
One more flexible alternative would be to allow the caller
to specify a minimum size for a blob to be "interesting" for
rename detection. But that would catch small boilerplate
files, not large ones (e.g., if you had the GPL COPYING file
in many directories).
A better alternative would be to allow a "-rename"
gitattribute to allow boilerplate files to be marked as
such. I'll leave the complexity of that solution until such
time as somebody actually wants it. The complaints we've
seen so far revolve around empty files, so let's start with
the simple thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The regexp configured with wordregex was incorrectly reused across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
When using word diff, the code sets the word_regex from various
defaults if it was not set already. The problem is that it does this
on the original diff_options, which will also be used in subsequent
diffs.
This means that when the word_regex is not given on the command line,
only the first diff for which a setting for word_regex (either from
attributes or diff.wordRegex) ever takes effect. This value then
propagates to the rest of the diff runs and in particular prevents
further attribute lookups.
Fix the problem of changing diff state once and for all, by working
with a _copy_ of the diff_options.
Noticed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Quite a chunk of builtin_diff_cmd deals with word-diff setup, defaults
and such. This makes the function a bit hard to read, but is also
asymmetric because the corresponding teardown lives in free_diff_words_data
already.
Refactor into a new function init_diff_words_data. For simplicity,
also shuffle around some functions it depends on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |\ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
"git diff-index" and its friends at the plumbing level showed the
"diff --git" header and nothing else for a path whose cached stat
info is dirty without actual difference when asked to produce a
patch. This was a longstanding bug that we could have fixed long
time ago.
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
|
| | |\ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
* jc/diff-stat-scaler:
diff --stat: show bars of same length for paths with same amount of changes
|
| |\ \ \ \ \ \ \ \
| |_|_|_|/ / / /
|/| | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Resurrects the preparatory clean-up patches from another topic that was
discarded, as this would give a saner foundation to build on diff.algo
configuration option series.
* jc/diff-algo-cleanup:
xdiff: PATIENCE/HISTOGRAM are not independent option bits
xdiff: remove XDL_PATCH_* macros
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
Because the default Myers, patience and histogram algorithms cannot be in
effect at the same time, XDL_PATIENCE_DIFF and XDL_HISTOGRAM_DIFF are not
independent bits. Instead of wasting one bit per algorithm, define a few
macros to access the few bits they occupy and update the code that access
them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \ \
| | |_|_|/ / / /
| |/| | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
The plumbing "diff" commands look at the working tree files without
refreshing the index themselves for performance reasons (the calling
script is expected to do that upfront just once, before calling one or
more of them). In the early days of git, they showed the "diff --git"
header before they actually ask the xdiff machinery to produce patches,
and ended up showing only these headers if the real contents are the same
and the difference they noticed was only because the stat info cached in
the index did not match that of the working tree. It was too late for the
implementation to take the header that it already emitted back.
But 3e97c7c (No diff -b/-w output for all-whitespace changes, 2009-11-19)
introduced necessary logic to keep the meta-information headers in a
strbuf and delay their output until the xdiff machinery noticed actual
changes. This was primarily in order to generate patches that ignore
whitespaces. When operating under "-w" mode, we wouldn't know if the
header is needed until we actually look at the resulting patch, so it was
a sensible thing to do, but we did not realize that the same reasoning
applies to stat-dirty paths.
Later, 296c6bb (diff: fix "git show -C -C" output when renaming a binary
file, 2010-05-26) generalized this machinery and added must_show_header
toggle. This is turned on when the header must be shown even when there
is no patch to be produced, e.g. only the mode was changed, or the path
was renamed, without changing the contents. However, when it did so, it
still kept the special case for the "-w" mode, which meant that the
plumbing would keep showing these phantom changes.
This corrects this historical inconsistency by allowing the plumbing to
omit paths that are only stat-dirty from its output in the same way as it
handles whitespace only changes under "-w" option.
The change in the behaviour can be seen in the updated test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \ \
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
The way that available columns are divided between the filename part
and the graph part is modified to use as many columns as necessary for
the filenames and the rest for the graph.
If there isn't enough columns to print both the filename and the
graph, at least 5/8 of available space is devoted to filenames. On a
standard 80 column terminal, or if not connected to a terminal and
using the default of 80 columns, this gives the same partition as
before.
The effect of this change is visible in the patch to the test vector
in t4052; with a small change with long filename, it stops truncating
the name part too short, and also allocates a bit more columns to the
graph for larger changes.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Default to the real terminal width for diff --stat output, instead
of the hard-coded 80 columns.
Some projects (especially in Java), have long filename paths, with
nested directories or long individual filenames. When files are
renamed, the filename part in stat output can be almost useless. If
the middle part between { and } is long (because the file was moved to
a completely different directory), then most of the path would be
truncated.
It makes sense to detect and use the full terminal width and display
full filenames if possible.
The are commands like diff, show, and log, which can adapt the output
to the terminal width. There are also commands like format-patch,
whose output should be independent of the terminal width. Since it is
safer to use the 80-column default, the real terminal width is only
used if requested by the calling code by setting diffopts.stat_width=-1.
Normally this value is 0, and can be set by the user only to a
non-negative value, so -1 is safe to use internally.
This patch only changes the diff builtin to use the full terminal width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | | | | | | |
| | | \ \ \ \ \ \ \ | |
| | |\ \ \ \ \ \ \ \ \
| | | | |/ / / / / /
| | | |/| | / / / /
| | | |_|_|/ / / /
| | |/| | | | | | |
|
| |\ \ \ \ \ \ \ \ \
| | |/ / / / / / /
| |/| | | | | | |
| | | | | | | | |
| | | | | | | | | |
* jc/diff-stat-scaler:
diff --stat: show bars of same length for paths with same amount of changes
|
| | | |/ / / / / /
| |/| | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
When commit 3ed74e6 (diff --stat: ensure at least one '-' for deletions,
and one '+' for additions, 2006-09-28) improved the output for files with
tiny modifications, we accidentally broke the logic to ensure that two
equal sized changes are shown with the bars of the same length, even when
rounding errors exist.
Compute the length of the graph bars, using the same "non-zero changes is
shown with at least one column" scaling logic, but by scaling the sum of
additions and deletions to come up with the total length of the bar (this
ensures that two equal sized changes result in bars of the same length),
and then scaling the smaller of the additions or deletions. The other side
is computed as the difference between the two.
This makes the apportioning between additions and deletions less accurate
due to rounding errors, but it is much less noticeable than two files with
the same amount of change showing bars of different length.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \ \ \
| |_|_|_|/ / / /
|/| | | | | | |
| | | | | | | |
| | | | | | | | |
* jk/userdiff-config-simplify:
drop odd return value semantics from userdiff_config
|
| | | |/ / / / /
| |/| | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
When the userdiff_config function was introduced in be58e70
(diff: unify external diff and funcname parsing code,
2008-10-05), it used a return value convention unlike any
other config callback. Like other callbacks, it used "-1" to
signal error. But it returned "1" to indicate that it found
something, and "0" otherwise; other callbacks simply
returned "0" to indicate that no error occurred.
This distinction was necessary at the time, because the
userdiff namespace overlapped slightly with the color
configuration namespace. So "diff.color.foo" could mean "the
'foo' slot of diff coloring" or "the 'foo' component of the
"color" userdiff driver". Because the color-parsing code
would die on an unknown color slot, we needed the userdiff
code to indicate that it had matched the variable, letting
us bypass the color-parsing code entirely.
Later, in 8b8e862 (ignore unknown color configuration,
2009-12-12), the color-parsing code learned to silently
ignore unknown slots. This means we no longer need to
protect userdiff-matched variables from reaching the
color-parsing code.
We can therefore change the userdiff_config calling
convention to a more normal one. This drops some code from
each caller, which is nice. But more importantly, it reduces
the cognitive load for readers who may wonder why
userdiff_config is unlike every other config callback.
There's no need to add a new test confirming that this
works; t4020 already contains a test that sets
diff.color.external.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |/ / / / / /
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
"git diff --stat" and "git apply --stat" now learn to print the line
"%d files changed, %d insertions(+), %d deletions(-)" in singular form
whenever applicable. "0 insertions" and "0 deletions" are also omitted
unless they are both zero.
This matches how versions of "diffstat" that are not prehistoric produced
their output, and also makes this line translatable.
[jc: with help from Thomas Dickey in archaeology of "diffstat"]
[jc: squashed Jonathan's updates to illustrations in tutorials and a test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| |/ / / / /
|/| | | | |
| | | | | |
| | | | | | |
* tr/maint-word-diff-incomplete-line:
word-diff: ignore '\ No newline at eof' marker
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The word-diff logic accumulates + and - lines until another line type
appears (normally [ @\]), at which point it generates the word diff.
This is usually correct, but it breaks when the preimage does not have
a newline at EOF:
$ printf "%s" "a a a" >a
$ printf "%s\n" "a ab a" >b
$ git diff --no-index --word-diff a b
diff --git 1/a 2/b
index 9f68e94..6a7c02f 100644
--- 1/a
+++ 2/b
@@ -1 +1 @@
[-a a a-]
No newline at end of file
{+a ab a+}
Because of the order of the lines in a unified diff
@@ -1 +1 @@
-a a a
\ No newline at end of file
+a ab a
the '\' line flushed the buffers, and the - and + lines were never
matched with each other.
A proper fix would defer such markers until the end of the hunk.
However, word-diff is inherently whitespace-ignoring, so as a cheap
fix simply ignore the marker (and hide it from the output).
We use a prefix match for '\ ' to parallel the logic in
apply.c:parse_fragment(). We currently do not localize this string
(just accept other variants of it in git-apply), but this should be
future-proof.
Noticed-by: Ivan Shirokoff <shirokoff@yandex-team.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
* rs/diff-whole-function:
diff: add option to show whole functions as context
xdiff: factor out get_func_line()
|
| | | |_|/ / /
| |/| | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Add the option -W/--function-context to git diff. It is similar to
the same option of git grep and expands the context of change hunks
so that the whole surrounding function is shown. This "natural"
context can allow changes to be understood better.
Note: GNU patch doesn't like diffs generated with the new option;
it seems to expect context lines to be the same before and after
changes. git apply doesn't complain.
This implementation has the same shortcoming as the one in grep,
namely that there is no way to explicitly find the end of a
function. That means that a few lines of extra context are shown,
right up to the next recognized function begins. It's already
useful in its current form, though.
The function get_func_line() in xdiff/xemit.c is extended to work
forward as well as backward to find post-context as well as
pre-context. It returns the position of the first found matching
line. The func_line parameter is made optional, as we don't need
it for -W.
The enhanced function is then used in xdl_emit_diff() to extend
the context as needed. If the added context overlaps with the
next change, it is merged into the current hunk.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| | |_|_|/ /
| |/| | | |
| | | | | |
| | | | | |
| | | | | | |
* rs/diff-cleanup-records-fix:
diff: resurrect XDF_NEED_MINIMAL with --minimal
Revert removal of multi-match discard heuristic in 27af01
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Earlier, 582aa00 (git diff too slow for a file, 2010-05-02)
unconditionally dropped XDF_NEED_MINIMAL option from the internal xdiff
invocation to help performance on pathological cases, while hinting that a
follow-up patch could reintroduce it with "--minimal" option from the
command line.
Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \ \
| |_|/ / / /
|/| | | | /
| | |_|_|/
| |/| | | |
* jc/maint-diffstat-numstat-context:
diff: teach --stat/--numstat to honor -U$num
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
"git diff -p" piped to external diffstat and "git diff --stat" may see
different patch text (both are valid and describe the same change
correctly) when counting the number of added and deleted lines, arriving
at different results to confuse the users, as --stat/--numstat codepath
always uses the hardcoded -U0 as the context length.
Make --stat/--numstat codepath to honor the context length the same way
as the textual patch codepath does to avoid this problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |\ \ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The diff config callback is split into two functions: one
which loads "ui" config, and one which loads "basic" config.
The former chains to the latter, as the diff UI config is a
superset of the plumbing config.
The color.diff variable is only loaded in the UI config.
However, the basic config actually chains to
git_color_default_config, which loads color.ui. This doesn't
actually cause any bugs, because the plumbing diff code does
not actually look at the value of color.ui.
However, it is somewhat nonsensical, and it makes it
difficult to refactor the color code. It probably came about
because there is no git_color_config to load only color
config, but rather just git_color_default_config, which
loads color config and chains to git_default_config.
This patch splits out the color-specific portion of
git_color_default_config so that the diff UI config can call
it directly. This is perhaps better explained by the
chaining of callbacks. Before we had:
git_diff_ui_config
-> git_diff_basic_config
-> git_color_default_config
-> git_default_config
Now we have:
git_diff_ui_config
-> git_color_config
-> git_diff_basic_config
-> git_default_config
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.
Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | | |_|/ /
| |/| | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
|
