aboutsummaryrefslogtreecommitdiff
path: root/diffcore.h
Commit message (Collapse)AuthorAge
* Merge branch 'tk/diffcore-delta-remove-unused'Junio C Hamano2016-11-17
|\ | | | | | | | | | | | | Code cleanup. * tk/diffcore-delta-remove-unused: diffcore-delta: remove unused parameter to diffcore_count_changes()
| * diffcore-delta: remove unused parameter to diffcore_count_changes()Tobias Klauser2016-11-14
| | | | | | | | | | | | | | | | | | | | | | The delta_limit parameter to diffcore_count_changes() has been unused since commit ba23bbc8e ("diffcore-delta: make change counter to byte oriented again.", 2006-03-04). Remove the parameter and adjust all callers. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | diff: rename struct diff_filespec's sha1_valid memberbrian m. carlson2016-06-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that this struct's sha1 member is called "oid", update the comment and the sha1_valid member to be called "oid_valid" instead. The following Coccinelle semantic patch was used to implement this, followed by the transformations in object_id.cocci: @@ struct diff_filespec o; @@ - o.sha1_valid + o.oid_valid @@ struct diff_filespec *p; @@ - p->sha1_valid + p->oid_valid Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | diff: convert struct diff_filespec to struct object_idbrian m. carlson2016-06-28
|/ | | | | | | | | | | | | | | | | | | | | Convert struct diff_filespec's sha1 member to use a struct object_id called "oid" instead. The following Coccinelle semantic patch was used to implement this, followed by the transformations in object_id.cocci: @@ struct diff_filespec o; @@ - o.sha1 + o.oid.hash @@ struct diff_filespec *p; @@ - p->sha1 + p->oid.hash Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* diff --stat: mark any file larger than core.bigfilethreshold binaryNguyễn Thái Ngọc Duy2014-08-18
| | | | | | | | | | | | Too large files may lead to failure to allocate memory. If it happens here, it could impact quite a few commands that involve diff. Moreover, too large files are inefficient to compare anyway (and most likely non-text), so mark them binary and skip looking at their content. Noticed-by: Dale R. Worley <worley@alum.mit.edu> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* diff.c: allow to pass more flags to diff_populate_filespecNguyễn Thái Ngọc Duy2014-08-18
| | | | | Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jk/diff-filespec-cleanup'Junio C Hamano2014-03-18
|\ | | | | | | | | | | | | Portability fix to a topic already in v1.9 * jk/diff-filespec-cleanup: diffcore.h: be explicit about the signedness of is_binary
| * diffcore.h: be explicit about the signedness of is_binaryRichard Lowe2014-02-24
| | | | | | | | | | | | | | | | | | | | | | Bitfields need to specify their signedness explicitly or the compiler is free to default as it sees fit. With compilers that default 'unsigned' (SUNWspro 12 seems to do this) the tri-state nature of is_binary vanishes and all files are treated as binary. Signed-off-by: Richard Lowe <richlowe@richlowe.net> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'ks/combine-diff'Junio C Hamano2014-03-05
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Teach combine-diff to honour the path-output-order imposed by diffcore-order, and optimize how matching paths are found in the N-way diffs made with parents. * ks/combine-diff: tests: add checking that combine-diff emits only correct paths combine-diff: simplify intersect_paths() further combine-diff: combine_diff_path.len is not needed anymore combine-diff: optimize combine_diff_path sets intersection diff test: add tests for combine-diff with orderfile diffcore-order: export generic ordering interface
| * | diffcore-order: export generic ordering interfaceKirill Smelkov2014-02-24
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | diffcore_order() interface only accepts a queue of `struct diff_filepair`. In the next patches, we'll want to order `struct combine_diff_path` by path, so let's first rework diffcore-order to also provide generic low-level interface for ordering arbitrary objects, provided they have path accessors. The new interface is: - `struct obj_order` for describing objects to ordering routine, and - order_objects() for actually doing the ordering work. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'nd/diff-quiet-stat-dirty'Junio C Hamano2014-02-27
|\ \ | |/ |/| | | | | | | | | | | | | "git diff --quiet -- pathspec1 pathspec2" sometimes did not return correct status value. * nd/diff-quiet-stat-dirty: diff: do not quit early on stat-dirty files diff.c: move diffcore_skip_stat_unmatch core logic out for reuse later
| * diff: do not quit early on stat-dirty filesNguyễn Thái Ngọc Duy2014-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When QUICK is set (i.e. with --quiet) we try to do as little work as possible, stopping after seeing the first change. stat-dirty is considered a "change" but it may turn out not, if no actual content is changed. The actual content test is performed too late in the process and the shortcut may be taken prematurely, leading to incorrect return code. Assume we do "git diff --quiet". If we have a stat-dirty file "a" and a really dirty file "b". We break the loop in run_diff_files() and stop after "a" because we have got a "change". Later in diffcore_skip_stat_unmatch() we find out "a" is actually not changed. But there's nothing else in the diff queue, we incorrectly declare "no change", ignoring the fact that "b" is changed. This also happens to "git diff --quiet HEAD" when it hits diff_can_quit_early() in oneway_diff(). This patch does the content test earlier in order to keep going if "a" is unchanged. The test result is cached so that when diffcore_skip_stat_unmatch() is done in the end, we spend no cycles on re-testing "a". Reported-by: IWAMOTO Toshihiro <iwamoto@valinux.co.jp> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | diff_filespec: use only 2 bits for is_binary flagJeff King2014-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The is_binary flag needs only three values: -1, 0, and 1. However, we use a whole 32-bit int for it on most systems (both 32- and 64- bit). Instead, we can mark it to use only 2 bits. On 32-bit systems, this lets it end up as part of the bitfield above (saving 4 bytes). On 64-bit systems, we don't see any change (because the savings end up as padding), but it does leave room for another "free" 32-bit value to be added later. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | diff_filespec: reorder is_binary fieldJeff King2014-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The middle of the diff_filespec struct contains a mixture of ints, shorts, and bit-fields, followed by a pointer. On an x86-64 system with an LP64 or LLP64 data model (i.e., most of them), the integers and flags end up being padded out by 41 bits to put the pointer at an 8-byte boundary. After the pointer, we have the "int is_binary" field, which is only 32 bits. We end up wasting another 32 bits to pad the struct size up to a multiple of 64 bits. We can move the is_binary field before the pointer, which lets the compiler store it where we used to have padding. This shrinks the top padding to only 9 bits (from the bit-fields), and eliminates the bottom padding entirely, dropping the struct size from 88 to 80 bytes. On a 32-bit system, there is no benefit, but nor should there be any harm (we only need 4-byte alignment there, so we were already using only 9 bits of padding). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | diff_filespec: drop xfrm_flags fieldJeff King2014-01-17
| | | | | | | | | | | | | | | | | | | | | | The only mention of this field in the code is by some debugging code which prints it out (and it will always be zero, since we never touch it otherwise). It was obsoleted very early on by 25d5ea4 ([PATCH] Redo rename/copy detection logic., 2005-05-24). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | diff_filespec: drop funcname_pattern_ident fieldJeff King2014-01-17
| | | | | | | | | | | | | | | | | | This struct field was obsoleted by be58e70 (diff: unify external diff and funcname parsing code, 2008-10-05), but we forgot to remove it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | diff_filespec: reorder dirty_submodule macro definitionsJeff King2014-01-17
|/ | | | | | | | | | | | | | | | | | | | | | | | | diff_filespec has a 2-bit "dirty_submodule" field and defines two flags as macros. Originally these were right next to each other, but a new field was accidentally added in between in commit 4682d85. This patch puts the field and its flags back together. Using an enum like: enum { DIRTY_SUBMODULE_UNTRACKED = 1, DIRTY_SUBMODULE_MODIFIED = 2 } dirty_submodule; would be more obvious, but it bloats the structure. Limiting the enum size like: } dirty_submodule : 2; might work, but it is not portable. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jk/maint-null-in-trees'Junio C Hamano2012-08-27
|\ | | | | | | | | | | | | | | | | We do not want a link to 0{40} object stored anywhere in our objects. * jk/maint-null-in-trees: fsck: detect null sha1 in tree entries do not write null sha1s to on-disk index diff: do not use null sha1 as a sentinel value
| * diff: do not use null sha1 as a sentinel valueJeff King2012-07-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The diff code represents paths using the diff_filespec struct. This struct has a sha1 to represent the sha1 of the content at that path, as well as a sha1_valid member which indicates whether its sha1 field is actually useful. If sha1_valid is not true, then the filespec represents a working tree file (e.g., for the no-index case, or for when the index is not up-to-date). The diff_filespec is only used internally, though. At the interfaces to the diff subsystem, callers feed the sha1 directly, and we create a diff_filespec from it. It's at that point that we look at the sha1 and decide whether it is valid or not; callers may pass the null sha1 as a sentinel value to indicate that it is not. We should not typically see the null sha1 coming from any other source (e.g., in the index itself, or from a tree). However, a corrupt tree might have a null sha1, which would cause "diff --patch" to accidentally diff the working tree version of a file instead of treating it as a blob. This patch extends the edges of the diff interface to accept a "sha1_valid" flag whenever we accept a sha1, and to use that flag when creating a filespec. In some cases, this means passing the flag through several layers, making the code change larger than would be desirable. One alternative would be to simply die() upon seeing corrupted trees with null sha1s. However, this fix more directly addresses the problem (while bogus sha1s in a tree are probably a bad thing, it is really the sentinel confusion sending us down the wrong code path that is what makes it devastating). And it means that git is more capable of examining and debugging these corrupted trees. For example, you can still "diff --raw" such a tree to find out when the bogus entry was introduced; you just cannot do a "--patch" diff (just as you could not with any other corrupted tree, as we do not have any content to diff). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'jc/refactor-diff-stdin'Junio C Hamano2012-07-13
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the way "git diff --no-index" is bolted onto by touching the low level code that is shared with the rest of the "git diff" code, even though it has to work in a very different way, any comparison that involves a file "-" at the root level incorrectly tried to read from the standard input. This cleans up the no-index codepath further to remove code that reads from the standard input from the core side, which is never necessary when git is running its usual diff operation. * jc/refactor-diff-stdin: diff-index.c: "git diff" has no need to read blob from the standard input diff-index.c: unify handling of command line paths diff-index.c: do not pretend paths are pathspecs
| * diff-index.c: "git diff" has no need to read blob from the standard inputJunio C Hamano2012-06-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only "diff --no-index -" does. Bolting the logic into the low-level function diff_populate_filespec() was a layering violation from day one. Move populate_from_stdin() function out of the generic diff.c to its only user, diff-index.c. Also make sure "-" from the command line stays a special token "read from the standard input", even if we later decide to sanitize the result from prefix_filename() function in a few obvious ways, e.g. removing unnecessary "./" prefix, duplicated slashes "//" in the middle, etc. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | combine-diff: support format_callbackJunio C Hamano2011-08-20
|/ | | | | | | | | | | | | | | | | | | | | | This teaches combine-diff machinery to feed a combined merge to a callback function when DIFF_FORMAT_CALLBACK is specified. So far, format callback functions are not used for anything but 2-way diffs. A callback is given a diff_queue_struct, which is an array of diff_filepair. As its name suggests, a diff_filepair is a _pair_ of diff_filespec that represents a single preimage and a single postimage. Since "diff -c" is to compare N parents with a single merge result and filter out any paths whose result match one (or more) of the parent(s), its output has to be able to represent N preimages and 1 postimage. For this reason, a callback function that inspects a diff_filepair that results from this new infrastructure can and is expected to view the preimage side (i.e. pair->one) as an array of diff_filespec. Each element in the array, except for the last one, is marked with "has_more_entries" bit, so that the same callback function can be used for 2-way diffs and combined diffs. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* diff: pass the entire diff-options to diffcore_pickaxe()Junio C Hamano2010-08-31
| | | | | | | That would make it easier to give enhanced feature to the pickaxe transformation. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* diff --follow: do call diffcore_std() as necessaryJunio C Hamano2010-08-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usually, diff frontends populate the output queue with filepairs without any rename information and call diffcore_std() to sort the renames out. When --follow is in effect, however, diff-tree family of frontend has a hack that looks like this: diff-tree frontend -> diff_tree_sha1() . populate diff_queued_diff . if --follow is in effect and there is only one change that creates the target path, then -> try_to_follow_renames() -> diff_tree_sha1() with no pathspec but with -C -> diffcore_std() to find renames . if rename is found, tweak diff_queued_diff and put a single filepair that records the found rename there -> diffcore_std() . tweak elements on diff_queued_diff by - rename detection - path ordering - pickaxe filtering We need to skip parts of the second call to diffcore_std() that is related to rename detection, and do so only when try_to_follow_renames() did find a rename. Earlier 1da6175 (Make diffcore_std only can run once before a diff_flush, 2010-05-06) tried to deal with this issue incorrectly; it unconditionally disabled any second call to diffcore_std(). This hopefully fixes the breakage. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Standardize do { ... } while (0) styleJonathan Nieder2010-08-12
| | | | | Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Document -B<n>[/<m>], -M<n> and -C<n> variants of -B, -M and -CMatthieu Moy2010-08-09
| | | | | | | | | | | | | These options take an optional argument, but this optional argument was not documented. Original patch by Matthieu Moy, but documentation for -B mostly copied from the explanations of Junio C Hamano. While we're there, fix a typo in a comment in diffcore.h. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Make diffcore_std only can run once before a diff_flushBo Yang2010-05-07
| | | | | | | | | | | | | | | | | | When file renames/copies detection is turned on, the second diffcore_std will degrade a 'C' pair to a 'R' pair. And this may happen when we run 'git log --follow' with hard copies finding. That is, the try_to_follow_renames() will run diffcore_std to find the copies, and then 'git log' will issue another diffcore_std, which will reduce 'src->rename_used' and recognize this copy as a rename. This is not what we want. So, I think we really don't need to run diffcore_std more than one time. Signed-off-by: Bo Yang <struggleyb.nku@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Add a macro DIFF_QUEUE_CLEAR.Bo Yang2010-05-07
| | | | | | | | Refactor the diff_queue_struct code, this macro help to reset the structure. Signed-off-by: Bo Yang <struggleyb.nku@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git diff --submodule: Show detailed dirty status of submodulesJens Lehmann2010-03-04
| | | | | | | | | | | | | | | When encountering a dirty submodule while doing "git diff --submodule" print an extra line for new untracked content and another for modified but already tracked content. And if the HEAD of the submodule is equal to the ref diffed against in the superproject, drop the output which would just show the same SHA1s and no commit message headlines. To achieve that, the dirty_submodule bitfield is expanded to two bits. The output of "git status" inside the submodule is parsed to set the according bits. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Performance optimization for detection of modified submodulesJens Lehmann2010-01-18
| | | | | | | | | | | | | | | | | | | In the worst case is_submodule_modified() got called three times for each submodule. The information we got from scanning the whole submodule tree the first time can be reused instead. New parameters have been added to diff_change() and diff_addremove(), the information is stored in a new member of struct diff_filespec. Its value is then reused instead of calling is_submodule_modified() again. When no explicit "-dirty" is needed in the output the call to is_submodule_modified() is not necessary when the submodules HEAD already disagrees with the ref of the superproject, as this alone marks it as modified. To achieve that, get_stat_data() got an extra argument. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'maint'Junio C Hamano2008-11-02
|\ | | | | | | | | | | | | * maint: Add reference for status letters in documentation. Document that git-log takes --all-match. Update draft 1.6.0.4 release notes
| * Add reference for status letters in documentation.Yann Dirson2008-11-02
| | | | | | | | | | | | | | | | Also fix error in diff_filepair::status documentation, and point to the in-code reference as well as the doc. Signed-off-by: Yann Dirson <ydirson@altern.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | diff: introduce diff.<driver>.binaryJeff King2008-10-18
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "diff" gitattribute is somewhat overloaded right now. It can say one of three things: 1. this file is definitely binary, or definitely not (i.e., diff or !diff) 2. this file should use an external diff engine (i.e., diff=foo, diff.foo.command = custom-script) 3. this file should use particular funcname patterns (i.e., diff=foo, diff.foo.(x?)funcname = some-regex) Most of the time, there is no conflict between these uses, since using one implies that the other is irrelevant (e.g., an external diff engine will decide for itself whether the file is binary). However, there is at least one conflicting situation: there is no way to say "use the regular rules to determine whether this file is binary, but if we do diff it textually, use this funcname pattern." That is, currently setting diff=foo indicates that the file is definitely text. This patch introduces a "binary" config option for a diff driver, so that one can explicitly set diff.foo.binary. We default this value to "don't know". That is, setting a diff attribute to "foo" and using "diff.foo.funcname" will have no effect on the binaryness of a file. To get the current behavior, one can set diff.foo.binary to true. This patch also has one additional advantage: it cleans up the interface to the userdiff code a bit. Before, calling code had to know more about whether attributes were false, true, or unset to determine binaryness. Now that binaryness is a property of a driver, we can represent these situations just by passing back a driver struct. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* Bust the ghost of long-defunct diffcore-pathspec.Yann Dirson2008-09-19
| | | | | | | | This concept was retired by 77882f6 (Retire diffcore-pathspec., 2006-04-10), more than 2 years ago. Signed-off-by: Yann Dirson <ydirson@altern.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* copy vs rename detection: avoid unnecessary O(n*m) loopsLinus Torvalds2007-10-26
| | | | | | | | | | | | | | | | | | | | | | | The core rename detection had some rather stupid code to check if a pathname was used by a later modification or rename, which basically walked the whole pathname space for all renames for each rename, in order to tell whether it was a pure rename (no remaining users) or should be considered a copy (other users of the source file remaining). That's really silly, since we can just keep a count of users around, and replace all those complex and expensive loops with just testing that simple counter (but this all depends on the previous commit that shared the diff_filespec data structure by using a separate reference count). Note that the reference count is not the same as the rename count: they behave otherwise rather similarly, but the reference count is tied to the allocation (and decremented at de-allocation, so that when it turns zero we can get rid of the memory), while the rename count is tied to the renames and is decremented when we find a rename (so that when it turns zero we know that it was a rename, not a copy). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Ref-count the filespecs used by diffcoreLinus Torvalds2007-10-26
| | | | | | | | | | | | | | | | Rather than copy the filespecs when introducing new versions of them (for rename or copy detection), use a refcount and increment the count when reusing the diff_filespec. This avoids unnecessary allocations, but the real reason behind this is a future enhancement: we will want to track shared data across the copy/rename detection. In order to efficiently notice when a filespec is used by a rename, the rename machinery wants to keep track of a rename usage count which is shared across all different users of the filespec. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rename diff_free_filespec_data_large() to diff_free_filespec_blob()Junio C Hamano2007-10-02
| | | | Signed-off-by: Junio C Hamano <gitster@pobox.com>
* diffcore-rename: cache file deltasJeff King2007-10-02
| | | | | | | | | | | | | | | | | | | | | | | | We find rename candidates by computing a fingerprint hash of each file, and then comparing those fingerprints. There are inherently O(n^2) comparisons, so it pays in CPU time to hoist the (rather expensive) computation of the fingerprint out of that loop (or to cache it once we have computed it once). Previously, we didn't keep the filespec information around because then we had the potential to consume a great deal of memory. However, instead of keeping all of the filespec data, we can instead just keep the fingerprint. This patch implements and uses diff_free_filespec_data_large to accomplish that goal. We also have to change estimate_similarity not to needlessly repopulate the filespec data when we already have the hash. Practical tests showed 4.5x speedup for a 10% memory usage increase. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Fix configuration syntax to specify customized hunk header patterns.Junio C Hamano2007-07-07
| | | | | | | | | | | | | | | | | | | | | | | | This updates the hunk header customization syntax. The special case 'funcname' attribute is gone. You assign the name of the type of contents to path's "diff" attribute as a string value in .gitattributes like this: *.java diff=java *.perl diff=perl *.doc diff=doc If you supply "diff.<name>.funcname" variable via the configuration mechanism (e.g. in $HOME/.gitconfig), the value is used as the regexp set to find the line to use for the hunk header (the variable is called "funcname" because such a line typically is the one that has the name of the function in programming language source text). If there is no such configuration, built-in default is used, if any. Currently there are two default patterns: default and java. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Per-path attribute based hunk header selection.Junio C Hamano2007-07-06
| | | | | | | | | | | | | | | | | | | | | | | | This makes"diff -p" hunk headers customizable via gitattributes mechanism. It is based on Johannes's earlier patch that allowed to define a single regexp to be used for everything. The mechanism to arrive at the regexp that is used to define hunk header is the same as other use of gitattributes. You assign an attribute, funcname (because "diff -p" typically uses the name of the function the patch is about as the hunk header), a simple string value. This can be one of the names of built-in pattern (currently, "java" is defined) or a custom pattern name, to be looked up from the configuration file. (in .gitattributes) *.java funcname=java *.perl funcname=perl (in .git/config) [funcname] java = ... # ugly and complicated regexp to override the built-in one. perl = ... # another ugly and complicated regexp to define a new one. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Introduce diff_filespec_is_binary()Junio C Hamano2007-07-06
| | | | | | | | | | | This replaces an explicit initialization of filespec->is_binary field used for rename/break followed by direct access to that field with a wrapper function that lazily iniaitlizes and accesses the field. We would add more attribute accesses for the use of diff routines, and it would be better to make this abstraction earlier. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* diffcore_filespec: add is_binaryJunio C Hamano2007-06-30
| | | | | | | | | diffcore-break and diffcore-rename would want to behave slightly differently depending on the binary-ness of the data, so add one bit to the filespec, as the structure is now passed down to diffcore_count_changes() function. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* diffcore_count_changes: pass diffcore_filespecJunio C Hamano2007-06-30
| | | | | | | | | | We may want to use richer information on the data we are dealing with in this function, so instead of passing a buffer address and length, just pass the diffcore_filespec structure. Existing callers always call this function with parameters taken from a filespec anyway, so there is no functionality changes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Make macros to prevent double-inclusion in headers consistent.Junio C Hamano2007-04-29
| | | | Signed-off-by: Junio C Hamano <junkio@cox.net>
* diff-index --cached --raw: show tree entry on the LHS for unmerged entries.Junio C Hamano2007-01-06
| | | | | | | | | | | | | This updates the way diffcore represents an unmerged pair somewhat. It used to be that entries with mode=0 on both sides were used to represent an unmerged pair, but now it has an explicit flag. This is to allow diff-index --cached to report the entry from the tree when the path is unmerged in the index. This is used in updating "git reset <tree> -- <path>" to restore absense of the path in the index from the tree. Signed-off-by: Junio C Hamano <junkio@cox.net>
* diff.c: do not use pathname comparison to tell renamesJunio C Hamano2006-08-03
| | | | | | | | | | | | The final output from diff used to compare pathnames between preimage and postimage to tell if the filepair is a rename/copy. By explicitly marking the filepair created by diffcore_rename(), the output routine, resolve_rename_copy(), does not have to do so anymore. This helps feeding a filepair that has different pathnames in one and two elements to the diff machinery (most notably, comparing two blobs). Signed-off-by: Junio C Hamano <junkio@cox.net>
* diffcore-rename: somewhat optimized.Junio C Hamano2006-03-12
| | | | | | | | | This changes diffcore-rename to reuse statistics information gathered during similarity estimation, and updates the hashtable implementation used to keep track of the statistics to be denser. This seems to give better performance. Signed-off-by: Junio C Hamano <junkio@cox.net>
* diffcore-break: similarity estimator fix.Junio C Hamano2006-03-04
| | | | | | | | This is a companion patch to the previous fix to diffcore-rename. The merging-back process should use a logic similar to what is used there. Signed-off-by: Junio C Hamano <junkio@cox.net>
* diffcore-rename: split out the delta counting code.Junio C Hamano2006-02-28
| | | | | | | This is to rework diffcore break/rename/copy detection code so that it does not affected when deltifier code gets improved. Signed-off-by: Junio C Hamano <junkio@cox.net>
* diffcore-break/diffcore-rename: integer overflow.Junio C Hamano2006-01-15
| | | | | | | | | | | | While reviewing the end user tutorial rewrite by J. Bruce Fields, I noticed that "git-diff-tree -B -C" did not correctly break the total rewrite of Documentation/tutorial.txt. It turns out that we had integer overflow during the break score computations. Cop out by using floating point. This is not a kernel. Signed-off-by: Junio C Hamano <junkio@cox.net>