| Commit message (Collapse) | Author | Age |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The "highlight" binary can, in some cases, determine the language type
by the means of file contents, for example the shebang in the first line
for some scripting languages. Make use of this autodetection for files
which syntax is not known by gitweb. In that case, pass the blob
contents to "highlight --force"; the parameter is needed to make it
always generate HTML output (which includes HTML-escaping).
Although we now run highlight on files which do not end up highlighted,
performance is virtually unaffected because when we call highlight, it
is used for escaping HTML. In the case that highlight is used, gitweb
calls sanitize() instead of esc_html(), and the latter is significantly
slower (it does more, being roughly a superset of sanitize()). Simple
benchmark comparing performance of 'blob' view of files without syntax
highlighting in gitweb before and after this change indicates ±1%
difference in request time for all file types. Benchmark was performed
on local instance on Debian, using Apache/2.4.23 web server and CGI.
Document the feature and improve syntax highlight documentation, add
test to ensure gitweb doesn't crash when language detection is used.
Signed-off-by: Ian Kelling <ian@iankelling.org>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Many tests have an initial setup step that might fail based
on whether earlier tests in the script have succeeded or
not. Using a trick like "|| true" breaks the &&-chain,
missing earlier failures (and fooling --chain-lint).
We can use test_might_fail in some cases, which is correct
and makes the intent more obvious. We can also use
test_unconfig for unsetting config (and which is more
robust, as well).
The case in t9500 is an oddball. It wants to run cmd1 _or_
cmd2, and does it like:
cmd1 || cmd2 &&
other_stuff
It's not wrong in this case, but it's a bad habit to get
into, because it breaks the &&-chain if used anywhere except
at the beginning of the test (and we use the correct
solution here, putting it inside a block for precedence).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
| |
This is what the code intended.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|\
| |
| |
| |
| | |
* rj/highlight-test-hang:
gitweb test: fix highlight test hang on Linux Mint
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Linux Mint has an implementation of the highlight command (unrelated
to the one from http://www.andre-simon.de) that works as a simple
filter. The script uses 'sed' to add terminal colour escape codes
around text matching a regular expression. When t9500-*.sh attempts
to run "highlight --version", the script simply hangs waiting for
input. (See https://bugs.launchpad.net/linuxmint/+bug/815005).
The tool required by gitweb can be installed from the 'highlight'
package. Unfortunately, given the default $PATH, this leads to the
tool having lower precedence than the script.
In order to avoid hanging the test, add '</dev/null' to the command
line of the highlight invocation. Also, since the 'highlight' tool
requred by gitweb produces '--version' output (and the script does
not), saving the command output allows a simple check for the wrong
'highlight'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
There are many instances where the treatment of symbolic links in the
object model and the algorithms are tested, but where it is not
necessary to actually have a symbolic link in the worktree. Make
adjustments to the tests and remove the SYMLINKS prerequisite when
appropriate in trivial cases, where "trivial" means:
- merely a replacement of 'ln -s a b && git add b' by test_ln_s_add
is needed;
- a test for symbolic link on the file system can be split off (and
remains protected by SYMLINKS);
- existing code is equivalent to test_ln_s_add.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|\ \
| | |
| | |
| | |
| | | |
* jn/gitweb-unborn-head:
gitweb: Fix "heads" view when there is no current branch
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In a repository whose HEAD points to an unborn branch with no commits,
"heads" view and "summary" view (which shows what is shown in "heads"
view) compared the object names of commits at the tip of branches with the
output from "git rev-parse HEAD", which caused comparison of a string with
undef and resulted in a warning in the server log.
This can happen if non-bare repository (with default 'master' branch)
is updated not via committing but by other means like push to it, or
Gerrit. It can happen also just after running "git checkout --orphan
<new branch>" but before creating any new commit on this branch.
Rewrite the comparison so that it also works when $head points at nothing;
in such a case, no branch can be "the current branch", add a test for it.
While at it, rename local variable $head to $head_at, as it points to
current commit rather than current branch name (HEAD contents).
The code still incorrectly shows all branches that point at the same
commit as what HEAD points as "the current branch", even when HEAD is
detached. Fixing this bug is outside the scope of this patch.
Reported-by: Rajesh Boyapati
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|\ \ \
| | | |
| | | |
| | | |
| | | |
| | | | |
* maint:
Update draft release notes to 1.7.9.2
gitweb: Fix 'grep' search for multiple matches in file
|
| |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit ff7f218 (gitweb: Fix file links in "grep" search, 2012-01-05),
added $file_href variable, to reduce duplication and have the fix
applied in single place.
Unfortunately it made variable defined inside the loop, not taking into
account the fact that $file_href was set only if file changed.
Therefore for files with multiple matches $file_href was undefined for
second and subsequent matches.
Fix this bug by moving $file_href declaration outside loop.
Adds tests for almost all forms of sarch in gitweb, which were missing
from testuite. Note that it only tests if there are no warnings, and
it doesn't check that gitweb finds what it should find.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|\ \ \
| |/ /
|/| |
| | |
| | | |
* jn/gitweb-unspecified-action:
gitweb: Fix actionless dispatch for non-existent objects
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When gitweb URL does not provide action explicitly, e.g.
http://git.example.org/repo.git/branch
dispatch() tries to guess action (view to be used) based on remaining
parameters. Among others it is based on the type of requested object,
which gave problems when asking for non-existent branch or file (for
example misspelt name).
Now undefined $action from dispatch() should not result in problems.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Test that side-by-side diff can deal with incomplete lines (and while
at it with pure addition, pure removal, and change), and with merge
commits, producing no errors or warnings.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|/ /
| |
| |
| |
| |
| |
| |
| | |
Check that "commitdiff" action in gitweb can handle (without errors)
incomplete lines as added and removed lines, and as context lines.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This adds the $projects_list_group_categories option which, if enabled,
will result in grouping projects by category on the project list page.
The category is specified for each project by the $GIT_DIR/category file
or the 'gitweb.category' variable in its configuration file. By default,
projects are put in the $project_list_default_category category.
Note:
- Categories are always sorted alphabetically, with projects in
each category sorted according to the globally selected $order.
- When displaying a subset of all the projects (page limiting), the
category headers are only displayed for projects present on the page.
The feature is inspired from Sham Chukoury's patch for the XMMS2
gitweb, but has been rewritten for the current gitweb code. The CSS
for categories is inspired from Gustavo Sverzut Barbieri's patch to
group projects by path.
Thanks to Florian Ragwitz for Perl tips.
[jn: Updated to post restructuring projects list generation, fixed bugs,
added very basic test in t9500 that there are no warnings from Perl.]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Extract filtering out forks (which is done if 'forks' feature is
enabled) into filter_forks_from_projects_list subroutine, and
searching projects (via projects search form, or via content tags)
into search_projects_list subroutine.
Both are now run _before_ displaying projects, and not while printing;
this allow to know upfront if there were any found projects. Gitweb
now can and do print 'No such projects found' if user searches for
phrase which does not correspond to any project (any repository).
This also would allow splitting projects list into pages, if we so
desire.
Filtering out forks and marking repository (project) as having forks
is now consolidated into one subroutine (special case of handling
forks in git_get_projects_list only for $projects_list being file is
now removed). Forks handling is also cleaned up and simplified.
$pr->{'forks'} now contains un-filled list of forks; we can now also
detect situation where the way for having forks is prepared, but there
are no forks yet.
Sorting projects got also refactored in a very straight way (just
moving code) into sort_projects_list subroutine.
The interaction between forks, content tags and searching is now made
more explicit: searching whether by tag, or via search form turns off
fork filtering (gitweb searches also forks, and will show all
results). If 'ctags' feature is disabled, then searching by tag is
too.
The t9500 test now includes some basic test for 'forks' and 'ctags'
features; the t9502 includes test checking if gitweb correctly filters
out forks.
Generating list of projects by scanning given directory is now also a
bit simplified wrt. handling filtering; it is byproduct of extracting
filtering forks to separate subroutine.
While at it we now detect that there are no projects and respond with
"404 No projects found" also for 'project_index' and 'opml' actions.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The most important issue is that after unsetting `i18n.commitencoding'
config variable t9500 no longer will use author and comitter name
containing ISO-8859-1 characters, which are invalid UTF-8 characters.
Besides it is good practice in general to clean up the state in tests.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Because '--immediate' stops test suite after first error, therefore in
this mode
test_debug 'cat gitweb.log'
was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.
Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).
This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|/
|
|
|
|
|
|
|
|
| |
The commit 7ce896b (Enable highlight executable path as a
configuration option, 2010-09-21) forgot to update t9500 test.
While at it, describe highlight test better.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This refactoring (adding guess_file_syntax and run_highlighter
subroutines) is meant to make it easier in the future to add support
for other syntax highlighing solutions, or make it smarter by not
re-running `git cat-file` second time.
Instead of looping over list of regexps (keys of %highlight_type hash),
make use of the fact that choosing syntax is based either on full
basename (%highlight_basename), or on file extension (%highlight_ext).
Add some basic test of syntax highlighting (with 'highlight' as
prerequisite) to t/t9500-gitweb-standalone-no-errors.sh test.
While at it make git_blob Perl style prettier.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit fixes a bug in processing project-specific override in
a situation when there is no project, e.g. for the projects list page.
When 'snapshot' feature had project specific config override enabled
by putting
$feature{'snapshot'}{'override'} = 1;
(or equivalent) in $GITWEB_CONFIG, and when viewing toplevel gitweb
page, which means the projects list page (to be more exact this
happens for any project-less action), gitweb would put the following
Perl warnings in error log:
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2065.
fatal: error processing config file(s)
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2221.
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2218.
The problem is in the following fragment of code:
# path to the current git repository
our $git_dir;
$git_dir = "$projectroot/$project" if $project;
# list of supported snapshot formats
our @snapshot_fmts = gitweb_get_feature('snapshot');
@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
For the toplevel gitweb page, which is the list of projects, $project is not
defined, therefore neither is $git_dir. gitweb_get_feature() subroutine
calls git_get_project_config() if project specific override is turned
on... but we don't have project here.
Those errors mentioned above occur in the following fragment of code in
git_get_project_config():
# get config
if (!defined $config_file ||
$config_file ne "$git_dir/config") {
%config = git_parse_project_config('gitweb');
$config_file = "$git_dir/config";
}
git_parse_project_config() calls git_cmd() which has '--git-dir='.$git_dir
There are (at least) three possible solutions:
1. Harden gitweb_get_feature() so that it doesn't call
git_get_project_config() if $project (and therefore $git_dir) is not
defined; there is no project for project specific config.
2. Harden git_get_project_config() like you did in your fix, returning early
if $git_dir is not defined.
3. Harden git_cmd() so that it doesn't add "--git-dir=$git_dir" if $git_dir
is not defined, and change git_get_project_config() so that it doesn't
even try to access $git_dir if it is not defined.
This commit implements both 1.) and 2.), i.e. gitweb_get_feature() doesn't
call project-specific override if $git_dir is not defined (if there is no
project), and git_get_project_config() returns early if $git_dir is not
defined.
Add a test for this bug to t/t9500-gitweb-standalone-no-errors.sh test.
Reported-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
| |
To accommodate additions to the test cases for gitweb, the preamble
from t9500 is now in its own library so that new sets of tests for
gitweb can use the same setup without copying the code.
Signed-off-by: Mark Rada <marada@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Introduce avatar support: the feature adds the appropriate img tag next
to author and committer in commit(diff), history, shortlog, log and tag
views. Multiple avatar providers are possible, but only gravatar is
implemented at the moment.
Gravatar support depends on Digest::MD5, which is a core package since
Perl 5.8. If gravatars are activated but Digest::MD5 cannot be found,
the feature will be automatically disabled.
No avatar provider is selected by default, except in the t9500 test.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some old iconv implementations do not have many alternate names and/or
do not match character encoding names case insensitively. These
implementations can not tell that utf-8 and UTF-8 are the same encoding
and fail when trying to do the conversion. So use the old names, which
modern implementations still support.
The following conversions were performed:
utf-8 --> UTF-8
ISO-8859-1 --> ISO8859-1
EUCJP --> eucJP
Also update t9129 and t9500 which make use of the test files in t/t3900.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
| |
These scripts all test git programs that are written in
perl, and thus obviously won't work if NO_PERL is defined.
We pass NO_PERL to the scripts from the building Makefile
via the GIT-BUILD-OPTIONS file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
| |
test_done always exits, so this line is never executed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Many tests depend on that symbolic links work. This introduces a check
that sets the prerequisite tag SYMLINKS if the file system supports
symbolic links. Since so many tests have to check for this prerequisite,
we do the check in test-lib.sh, so that we don't need to repeat the test
in many scripts.
To check for 'ln -s' failures, you can use a FAT partition on Linux:
$ mkdosfs -C git-on-fat 1000000
$ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt
Clone git to /mnt and
$ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7
t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \
make test
(These additionally skipped tests depend on POSIX permissions that FAT on
Linux does not provide.)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This function replaces sequences of 'chmod +x' and 'git update-index
--chmod=+x' in the test suite, whose purpose is to help filesystems
that need core.filemode=false. Two places where only 'chmod +x' was used
we also use this new function.
The function calls 'git update-index --chmod' without checking
core.filemode (unlike some of the call sites did). We do this because the
call sites *expect* that the executable bit ends up in the index (ie. it
is not the purpose of the call sites to *test* whether git treats
'chmod +x' and 'update-index --chmod=+x' correctly). Therefore, on
filesystems with core.filemode=true the 'git update-index --chmod' is a
no-op.
The function uses --add with update-index to help one call site in
t6031-merge-recursive. It makes no difference for the other callers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Some tests report that some tests will be skipped. They used
'test_expect_success' with a trivially successful test. Nowadays we have
the helper function 'say' for this purpose.
In on case, 'say_color skip' is replaced by 'say' because the former is
not intended as a public API.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a feature like "blame" is permitted to be overridden in the
repository configuration but it is not actually set in the repository,
a warning is emitted due to the undefined value of the repository
configuration, even though it's a perfectly normal condition.
Emitting warning is grounds for test failure in the gitweb test
script.
This error was caused by rewrite of git_get_project_config from using
"git config [<type>] <name>" for each individual configuration
variable checked to parsing "git config --list --null" output in
commit b201927 (gitweb: Read repo config using 'git config -z -l').
Earlier version of git_get_project_config was returning empty string
if variable do not exist in config; newer version is meant to return
undef in this case, therefore change in feature_bool was needed.
Additionally config_to_* subroutines were meant to be invoked only if
configuration variable exists; therefore we added early return to
git_get_project_config: it now returns no value if variable does not
exists in config. Otherwise config_to_* subroutines (config_to_bool
in paryicular) wouldn't be able to distinguish between the case where
variable does not exist and the case where variable doesn't have value
(the "[section] noval" case, which evaluates to true for boolean).
While at it fix bug in config_to_bool, where checking if $val is
defined (if config variable has value) was done _after_ stripping
leading and trailing whitespace, which lead to 'Use of uninitialized
value' warning.
Add test case for features overridable but not overriden in repo
config, and case for no value boolean configuration variable.
Signed-off-by: Marcel M. Cary <marcel@oak.homeunix.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CGI::url() has some issues when rebuilding the script URL if the script
is a DirectoryIndex.
One of these issue is the inability to strip PATH_INFO, which is why
we had to do it ourselves.
Another issue is that the resulting URL cannot be used for the <base>
tag: it works if we're the DirectoryIndex at the root level, but not
otherwise.
We fix this by building the proper base URL ourselves, and improve the
comment about the need to strip PATH_INFO manually while we're at it.
Additionally t/t9500-gitweb-standalone-no-errors.sh had to be modified
to set SCRIPT_NAME variable (CGI standard states that it MUST be set,
and now gitweb uses it if PATH_INFO is not empty, as is the case for
some of tests in t9500).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In insert_file() subroutine (which is used to insert HTML fragments as
custom header, footer, hometext (for projects list view), and per
project README.html (for summary view)) we used:
map(to_utf8, <$fd>);
This doesn't work, and other form has to be used:
map { to_utf8($_) } <$fd>;
Now with test for t9600 added, for $GIT_DIR/README.html.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|\
| |
| |
| |
| |
| |
| |
| | |
* maint:
gitweb: Add path_info tests to t/t9500-gitweb-standalone-no-errors.sh
gitweb: Fix two 'uninitialized value' warnings in git_tree()
Solaris: Use OLD_ICONV to avoid compile warnings
gitweb: remove PATH_INFO from $my_url and $my_uri
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Note that those tests only check that there are no errors nor
warnings from Perl; they do not check for example if gitweb doesn't
use ARRAY(0x8e3cc20) instead of correct value in links, etc.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We try to avoid using the "-q" or "-e" options, as they are
largely useless, as explained in aadbe44f.
There is one exception for "-e" here, which is in t7701 used
to produce an "or" of patterns. This can be rewritten as an
egrep pattern.
This patch also removes use of "grep -F" in favor of the
more widely available "fgrep".
[sp: Tested on AIX 5.3 by Mike Ralphson,
Tested on MinGW by Johannes Sixt]
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This form is not portable across all shells, so replace instances of:
export FOO=bar
with:
FOO=bar
export FOO
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When asked for history of a file which is not present in given branch
("HEAD", i.e. current branch, or given by transient $hash_hase ('hb')
parameter), but is present deeper in the history (meaning that "git
rev-list --full-history $hash_base -- $file_name" is not empty), and
there is no $hash ('h') parameter set for a file, gitweb would spew
multiple of "Use of uninitialized value" warnings, and some links
would be missing. This commit fixes this bug.
This bug occurs in the rare cases when "git log -- <path>" is empty
and "git log --full-history -- <path>" is not, or to be more exact in
the cases when full-history starts later than given branch. It can
happen if you are using handcrafted gitwb URL, or if you follow
generic 'history' link or bookmark for a file which got deleted.
Gitweb tried to get file type ('tree', or 'blob', or even 'commit')
from the commit we start searching from (where the file was not
present), and not among found commits. This was the cause of "Use of
uninitialized value" warnings.
This commit also add tests for such situation to t9500 test.
While we are it, return HTTP error if there is _no_ history; it means
that file or directory was not found (for given branch). Also error
out if type of item could not be found: it should not happen now, but
better be sure.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is important for the list of clone urls, where if there are
no per-repository clone URL configured, the default base URLs
are never used for URL construction without this patch.
Add tests for different ways of setting project URLs, just in case.
Note that those tests in current form wouldn't detect breakage fixed
by this patch, as it only checks for errors and not for expected
output.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Make blame view and snapshot support overridable by repository
config. Test tree view with both features disabled, and with both
features enabled.
Test with features enabled also tests multiple formats snapshot
support (in tree view).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
| |
It does appear to do nothing; gitweb is run as standalone program
and not as CGI script in this test. This call caused problems later.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
| |
Signed-off-by: Luke Lu <git@vicaya.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On filesystems where it is appropriate to set core.filemode
to false, test 29 ("commitdiff(0): mode change") fails when
git-commit does not notice a file (execute) permission change.
A fix requires noting the new file execute permission in the
index with a "git update-index --chmod=+x", prior to the commit.
Add a function (note_chmod) which implements this idea, and
insert a call in each test that modifies the x permission.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Simplify and make more readable validation of 'opt' (extra options)
parameter, using exists($hash{key}) instead of grepping keys of a hash
for value.
Move 'opt' parameter to be the last (for now) in the URL.
Make use of '--no-merges' extra option ('opt') by adding "no merges"
RSS and Atom feeds to the HTML header. Note that alternate format
links in the RSS and Atom views do not use '--no-merges' option yet!
Adds tests for the 'opt' parameter to t9500-gitweb-standalone-no-errors.sh
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
| |
gitweb calls Encode::decode_utf8 with two arguments,
but old versions of perl only allow this function to be called
with one argument. Even older versions of perl do not even
have an Encode module.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gitweb assumes that everything is in UTF-8. If a text contains invalid
UTF-8 character sequences, the text must be in a different encoding.
This commit introduces $fallback_encoding which would be used as input
encoding if gitweb encounters text with is not valid UTF-8.
Add basic test for this in t/t9500-gitweb-standalone-no-errors.sh
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Tested-by: Alexandre Julliard <julliard@winehq.org>
Tested-by: Ismail Dönmez <ismail@pardus.org.tr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|