aboutsummaryrefslogtreecommitdiff
path: root/t
Commit message (Collapse)AuthorAge
* pack-objects: only repack or loosen objects residing in "local" packsBrandon Casey2009-03-20
| | | | | | | | | | | | | | | | These two features were invented for use by repack when repack will delete the local packs that have been made redundant. The packs accessible through alternates are not deleted by repack, so the objects contained in them are still accessible after the local packs are deleted. They do not need to be repacked into the new pack or loosened. For the case of loosening they would immediately be deleted by the subsequent prune-packed that is called by repack anyway. This fixes the test 'packed unreachable obs in alternate ODB are not loosened' in t7700. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-repack.sh: don't use --kept-pack-only option to pack-objectsBrandon Casey2009-03-20
| | | | | | | | | | | | | | | The --kept-pack-only option to pack-objects treats all kept packs as equal. This results in objects that reside in an alternate pack that has a .keep file, not being packed into a newly created pack when the user specifies the -a option to repack. Since the user may not have any control over the alternate database, git should not refrain from repacking those objects even though they are in a pack with a .keep file. This fixes the 'packed obs in alternate ODB kept pack are repacked' test in t7700. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* t7700-repack: add two new tests demonstrating repacking flawsBrandon Casey2009-03-20
| | | | | | | | | | | | | | | | | | | | | | | | | 1) The new --kept-pack-only mechansim of rev-list/pack-objects has replaced --unpacked=. This new mechansim does not operate solely on "local" packs now. The result is that objects residing in an alternate pack which has a .keep file will not be repacked with repack -a. This flaw is only apparent when a commit object is the one residing in an alternate kept pack. 2) The 'repack unpacked objects' and 'loosen unpacked objects' mechanisms of pack-objects, i.e. --keep-unreachable and --unpack-unreachable, now do not operate solely on local packs. The --keep-unreachable option no longer has any callers, but --unpack-unreachable is used when repack is called with '-A -d' and the local repo has existing packs. In this case, objects residing in alternate, not-kept packs will be loosened, and then immediately deleted by repack's call to prune-packed. The test must manually call pack-objects to avoid the call to prune-packed that is made by repack when -d is used. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fast-import: make tagger information optionalJunio C Hamano2008-12-19
| | | | | | | | | Even though newer Porcelain tools always record the tagger information when creating new tags, export/import pair should be able to faithfully reproduce ancient tag objects that lack tagger information. Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Shawn O. Pearce <spearce@spearce.org>
* fast-export: deal with tag objects that do not have a taggerJohannes Schindelin2008-12-19
| | | | | | | | | | | | | | | | | When no tagger was found (old Git produced tags like this), no "tagger" line is printed (but this is incompatible with the current git fast-import). Alternatively, you can pass the option --fake-missing-tagger, forcing fast-export to fake a tagger Unspecified Tagger <no-tagger> with a tag date of the beginning of (Unix) time in the case of a missing tagger, so that fast-import is still able to import the result. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-show: do not segfault when showing a bad tagJunio C Hamano2008-12-15
| | | | | | | | | | | When a tag points at a bad or nonexistent object, we should diagnose the breakage and exit. An earlier commit 4f3dcc2 (Fix 'git show' on signed tag of signed tag of commit, 2008-07-01) lost this check and made it segfault instead; not good. This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-svn: Make following parents atomicDeskin Miller2008-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | find_parent_branch generates branch@rev type branches when one has to look back through SVN history to properly get the history for a branch copied from somewhere not already being tracked by git-svn. If in the process of fetching this history, git-svn is interrupted, then when one fetches again, it will use whatever was last fetched as the parent commit and fail to fetch any more history which it didn't get to before being terminated. This is especially troubling in that different git-svn copies of the same SVN repository can end up with different commit sha1s, incorrectly showing the history as divergent and precluding easy collaboration using git push and fetch. To fix this, when we initialise the Git::SVN object $gs to search for and perhaps fetch history, we check if there are any commits in SVN in the range between the current revision $gs is at, and the top revision for which we were asked to fill history. If there are commits we're missing in that range, we continue the fetch from the current revision to the top, properly getting all history before using it as the parent for the branch we're trying to create. Signed-off-by: Deskin Miller <deskinm@umich.edu> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* "git diff <tree>{3,}": do not reverse order of argumentsMatt McCutchen2008-12-07
| | | | | | | | | | | | According to the message of commit 0fe7c1de16f71312e6adac4b85bddf0d62a47168, "git diff" with three or more trees expects the merged tree first followed by the parents, in order. However, this command reversed the order of its arguments, resulting in confusing diffs. A comment /* Again, the revs are all reverse */ suggested there was a reason for this, but I can't figure out the reason, so I removed the reversal of the arguments. Test case included. Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* Merge branch 'jk/maint-commit-v-strip' into maintJunio C Hamano2008-12-02
|\ | | | | | | | | * jk/maint-commit-v-strip: commit: Fix stripping of patch in verbose mode.
| * commit: Fix stripping of patch in verbose mode.Jeff King2008-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the "-v" option is given, we put diff of what is to be committed into the commit template, and then strip it back out again after the user has edited it. We used to look for the diff by searching for the "diff --git a/" header. With diff.mnemonicprefix set in the configuration, however, this pattern does not match. The pattern is loosened to cover this case. Also, if the user puts their own diff in the message (e.g., as a sample output), then we will accidentally trigger the pattern, removing part of their output. We can avoid doing this stripping altogether if the user didn't use "-v" in the first place, so we know that any match we find will be a false positive. [jc: this fix was split out of a series originally meant for master.] Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'bc/maint-keep-pack' into maintJunio C Hamano2008-12-02
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * bc/maint-keep-pack: repack: only unpack-unreachable if we are deleting redundant packs t7700: test that 'repack -a' packs alternate packed objects pack-objects: extend --local to mean ignore non-local loose objects too sha1_file.c: split has_loose_object() into local and non-local counterparts t7700: demonstrate mishandling of loose objects in an alternate ODB builtin-gc.c: use new pack_keep bitfield to detect .keep file existence repack: do not fall back to incremental repacking with [-a|-A] repack: don't repack local objects in packs with .keep file pack-objects: new option --honor-pack-keep packed_git: convert pack_local flag into a bitfield and add pack_keep t7700: demonstrate mishandling of objects in packs with a .keep file
| * | repack: only unpack-unreachable if we are deleting redundant packsBrandon Casey2008-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The -A option calls pack-objects with the --unpack-unreachable option so that the unreachable objects in local packs are left in the local object store loose. But if the -d option to repack was _not_ used, then these unpacked loose objects are redundant and unnecessary. Update tests in t7701. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | t7700: test that 'repack -a' packs alternate packed objectsBrandon Casey2008-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, when 'repack -a' was called and there were no packs in the local repository without a .keep file, the repack would fall back to calling pack-objects with '--unpacked --incremental'. This resulted in the created pack file, if any, to be missing the packed objects in the alternate object store. Test that this specific case has been fixed. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | pack-objects: extend --local to mean ignore non-local loose objects tooBrandon Casey2008-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch, --local means pack only local objects that are not already packed. Additionally, this fixes t7700 testing whether loose objects in an alternate object database are repacked. Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | t7700: demonstrate mishandling of loose objects in an alternate ODBBrandon Casey2008-11-12
| | | | | | | | | | | | | | | | | | | | | | | | Loose objects residing in an alternate object database should not be packed when the -l option to repack is used. Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | repack: don't repack local objects in packs with .keep fileBrandon Casey2008-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the user created a .keep file for a local pack, then it can be inferred that the user does not want those objects repacked. This fixes the repack bug tested by t7700. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | t7700: demonstrate mishandling of objects in packs with a .keep fileBrandon Casey2008-11-12
| |/ | | | | | | | | | | | | | | Objects residing in pack files that have an associated .keep file are not supposed to be repacked into new pack files, but they are. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'st/maint-tag' into maintJunio C Hamano2008-11-30
|\ \ | | | | | | | | | | | | | | | * st/maint-tag: tag: Add more tests about mixing incompatible modes and options tag: Check that options are only allowed in the appropriate mode
| * | tag: Add more tests about mixing incompatible modes and optionsSamuel Tardieu2008-11-04
| | | | | | | | | | | | | | | Signed-off-by: Samuel Tardieu <sam@rfc1149.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Merge branch 'mk/maint-cg-push' into maintJunio C Hamano2008-11-30
|\ \ \ | | | | | | | | | | | | | | | | * mk/maint-cg-push: git push: Interpret $GIT_DIR/branches in a Cogito compatible way
| * | | git push: Interpret $GIT_DIR/branches in a Cogito compatible wayMartin Koegler2008-11-11
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current git versions ignore everything after # (called <head> in the following) when pushing. Older versions (before cf818348f1ab57), interpret #<head> as part of the URL, which make git bail out. As branches origin from Cogito, it is the best to correct this by using the behaviour of cg-push, that is to push HEAD to remote refs/heads/<head>. Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Merge branch 'mv/fast-export' into maintJunio C Hamano2008-11-27
|\ \ \ | | | | | | | | | | | | | | | | | | | | * mv/fast-export: fast-export: use an unsorted string list for extra_refs Add new testcase to show fast-export does not always exports all tags
| * | | fast-export: use an unsorted string list for extra_refsJohannes Schindelin2008-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The list extra_refs contains tags and the objects referenced by them, so that they can be handled at the end. When a tag references a commit, that commit is added to the list using the same name. Also, the function handle_tags_and_duplicates() relies on the order the items were added to extra_refs, so clearly we do not want to use a sorted list here. Noticed by Miklos Vajna. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | Add new testcase to show fast-export does not always exports all tagsMiklos Vajna2008-11-23
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | Teach "git diff" to honour --[no-]ext-diffJunio C Hamano2008-11-26
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original intention of 72909be (Add diff-option --ext-diff, 2007-06-30) was to optionally allow the use of external diff viewer in "git log" family (while keeping them disabled by default). It exposed the "allow external diff" bit to the UI, but forgot to adjust the "git diff" codepath that was set up to always allow use of the external diff viewer. Noticed by Nazri Ramliy; tests by René Scharfe squashed in. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Fix pack.packSizeLimit and --max-pack-size handlingNicolas Pitre2008-11-12
|/ / | | | | | | | | | | | | | | | | | | If the limit was sufficiently low, having a single object written could bust the limit (by design), but caused the remaining allowed size to go negative for subsequent objects, which for an unsigned variable is a rather huge limit. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | checkout: Don't crash when switching away from an invalid branch.Alexandre Julliard2008-11-09
| | | | | | | | | | | | | | | | | | When using alternates, it is possible for HEAD to end up pointing to an invalid commit. git checkout should be able to recover from that situation without crashing. Signed-off-by: Alexandre Julliard <julliard@winehq.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'cb/maint-update-ref-fix' into maintJunio C Hamano2008-11-08
|\ \ | | | | | | | | | | | | | | | * cb/maint-update-ref-fix: push: fix local refs update if already up-to-date do not force write of packed refs
| * | push: fix local refs update if already up-to-dateClemens Buchacher2008-11-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | git push normally updates local refs only after a successful push. If the remote already has the updates -- pushed indirectly through another repository, for example -- we forget to update local tracking refs. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | do not force write of packed refsClemens Buchacher2008-11-05
| |/ | | | | | | | | | | | | | | | | We force writing a ref if it does not exist. Originally, we only had to look for the ref file to check if it existed. Now we have to look for a packed ref as well. Luckily, resolve_ref already does all the work for us. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'mv/maint-branch-m-symref' into maintJunio C Hamano2008-11-08
|\ \ | |/ |/| | | | | | | | | | | | | * mv/maint-branch-m-symref: update-ref --no-deref -d: handle the case when the pointed ref is packed git branch -m: forbid renaming of a symref Fix git update-ref --no-deref -d. rename_ref(): handle the case when the reflog of a ref does not exist Fix git branch -m for symrefs.
| * update-ref --no-deref -d: handle the case when the pointed ref is packedMiklos Vajna2008-10-31
| | | | | | | | | | | | | | | | | | | | | | | | In this case we did nothing in the past, but we should delete the reference in fact. The problem was that when the symref is not packed but the referenced ref is packed, then we assumed that the symref is packed as well, but symrefs are never packed. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * git branch -m: forbid renaming of a symrefMiklos Vajna2008-10-30
| | | | | | | | | | | | | | | | | | There may be cases where one would really want to rename the symbolic ref without changing its value, but "git branch -m" is not such a use-case. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Fix git update-ref --no-deref -d.Miklos Vajna2008-10-26
| | | | | | | | | | | | | | Till now --no-deref was just ignored when deleting refs, fix this. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Fix git branch -m for symrefs.Miklos Vajna2008-10-26
| | | | | | | | | | | | | | | | | | | | | | | | | | This had two problems with symrefs. First, it copied the actual sha1 instead of the "pointer", second it failed to remove the old ref after a successful rename. Given that till now delete_ref() always dereferenced symrefs, a new parameters has been introduced to delete_ref() to allow deleting refs without a dereference. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'js/maint-fetch-update-head' into maintJunio C Hamano2008-11-02
|\ \ | | | | | | | | | | | | | | | * js/maint-fetch-update-head: pull: allow "git pull origin $something:$current_branch" into an unborn branch Fix fetch/pull when run without --update-head-ok
| * | pull: allow "git pull origin $something:$current_branch" into an unborn branchJunio C Hamano2008-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some misguided documents floating on the Net suggest this sequence: mkdir newdir && cd newdir git init git remote add origin $url git pull origin master:master "git pull" has known about misguided "pull" that lets the underlying fetch update the current branch for a long time. It also has known about "git pull origin master" into a branch yet to be born. These two workarounds however were not aware of the existence of each other and did not work well together. This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | Fix fetch/pull when run without --update-head-okJohannes Schindelin2008-10-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some confusing tutorials suggested that it would be a good idea to fetch into the current branch with something like this: git fetch origin master:master (or even worse: the same command line with "pull" instead of "fetch"). While it might make sense to store what you want to pull, it typically is plain wrong when the current branch is "master". This should only be allowed when (an incorrect) "git pull origin master:master" tries to work around by giving --update-head-ok to underlying "git fetch", and otherwise we should refuse it, but somewhere along the lines we lost that behavior. The check for the current branch is now _only_ performed in non-bare repositories, which is an improvement from the original behaviour. Some newer tests were depending on the broken behaviour of "git fetch" this patch fixes, and have been adjusted. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Shawn O. Pearce <spearce@spearce.org> Acked-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Merge branch 'jk/maint-ls-files-other' into maintJunio C Hamano2008-11-02
|\ \ \ | | | | | | | | | | | | | | | | * jk/maint-ls-files-other: refactor handling of "other" files in ls-files and status
| * | | refactor handling of "other" files in ls-files and statusJeff King2008-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the "git status" display code was originally converted to C, we copied the code from ls-files to discover whether a pathname returned by read_directory was an "other", or untracked, file. Much later, 5698454e updated the code in ls-files to handle some new cases caused by gitlinks. This left the code in wt-status.c broken: it would display submodule directories as untracked directories. Nobody noticed until now, however, because unless status.showUntrackedFiles was set to "all", submodule directories were not actually reported by read_directory. So the bug was only triggered in the presence of a submodule _and_ this config option. This patch pulls the ls-files code into a new function, cache_name_is_other, and uses it in both places. This should leave the ls-files functionality the same and fix the bug in status. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | Merge branch 'jc/maint-reset-remove-unmerged-new' into maintJunio C Hamano2008-11-02
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | * jc/maint-reset-remove-unmerged-new: reset --hard/read-tree --reset -u: remove unmerged new paths
| * | | | reset --hard/read-tree --reset -u: remove unmerged new pathsJunio C Hamano2008-10-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When aborting a failed merge that has brought in a new path using "git reset --hard" or "git read-tree --reset -u", we used to first forget about the new path (via read_cache_unmerged) and then matched the working tree to what is recorded in the index, thus ending up leaving the new path in the work tree. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | Merge branch 'jc/maint-co-track' into maintJunio C Hamano2008-11-02
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * jc/maint-co-track: Enhance hold_lock_file_for_{update,append}() API demonstrate breakage of detached checkout with symbolic link HEAD Fix "checkout --track -b newbranch" on detached HEAD
| * | | | | Enhance hold_lock_file_for_{update,append}() APIJunio C Hamano2008-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the "die_on_error" boolean parameter to a mere "flags", and changes the existing callers of hold_lock_file_for_update/append() functions to pass LOCK_DIE_ON_ERROR. Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | demonstrate breakage of detached checkout with symbolic link HEADJunio C Hamano2008-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When core.prefersymlinkrefs is in use, detaching the HEAD by checkout incorrectly clobbers the tip of the current branch. Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | | | Fix "checkout --track -b newbranch" on detached HEADJunio C Hamano2008-10-17
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test to make sure that checkout fails when --track was asked for and we cannot set up tracking information in t7201 was wrong, and it turns out that the implementation for that feature itself was buggy. This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | Use test-chmtime -v instead of perl in t5000 to get mtime of a fileAlex Riesen2008-10-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test was broken on admittedly broken combination of Windows, Cygwin, and ActiveState Perl. Signed-off-by: Alex Riesen <ariesen@harmanbecker.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | git-archive: work in bare reposCharles Bailey2008-10-26
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This moves the call to git_config to a place where it doesn't break the logic for using git archive in a bare repository but retains the fix to make git archive respect core.autocrlf. Tests are by René Scharfe. Signed-off-by: Charles Bailey <charles@hashpling.org> Tested-by: Deskin Miller <deskinm@umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | rehabilitate 'git index-pack' inside the object storeNicolas Pitre2008-10-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before commit d0b92a3f6e it was possible to run 'git index-pack' directly in the .git/objects/pack/ directory. Restore that ability. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | Fix testcase failure when extended attributes are in useJunio C Hamano2008-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 06cbe855 (Make core.sharedRepository more generic, 2008-04-16) made several testcases in t1301-shared-repo.sh which fail if on a system which creates files with extended attributes (e.g. SELinux), since ls appends a '+' sign to the permission set in such cases. In fact, POSIX.1 allows ls to add a single printable character after the usual 3x3 permission bits to show that an optional alternate/additional access method is associated with the path. This fixes the testcase to strip any such sign prior to verifying the permission set. Signed-off-by: Junio C Hamano <gitster@pobox.com> Tested-by: Deskin Miller <deskinm@umich.edu>
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-12 23:06:20 +0000