aboutsummaryrefslogtreecommitdiff
path: root/upload-pack.c
Commit message (Collapse)AuthorAge
* include agent identifier in capability stringJeff King2012-08-03
| | | | | | | | | | | | | | | | | | | | | | | | Instead of having the client advertise a particular version number in the git protocol, we have managed extensions and backwards compatibility by having clients and servers advertise capabilities that they support. This is far more robust than having each side consult a table of known versions, and provides sufficient information for the protocol interaction to complete. However, it does not allow servers to keep statistics on which client versions are being used. This information is not necessary to complete the network request (the capabilities provide enough information for that), but it may be helpful to conduct a general survey of client versions in use. We already send the client version in the user-agent header for http requests; adding it here allows us to gather similar statistics for non-http requests. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jk/parse-object-cached'Junio C Hamano2012-01-29
|\ | | | | | | | | | | | | * jk/parse-object-cached: upload-pack: avoid parsing tag destinations upload-pack: avoid parsing objects during ref advertisement parse_object: try internal cache before reading object db
| * upload-pack: avoid parsing tag destinationsJeff King2012-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When upload-pack advertises refs, it dereferences any tags it sees, and shows the resulting sha1 to the client. It does this by calling deref_tag. That function must load and parse each tag object to find the sha1 of the tagged object. However, it also ends up parsing the tagged object itself, which is not strictly necessary for upload-pack's use. Each tag produces two object loads (assuming it is not a recursive tag), when it could get away with only a single one. Dropping the second load halves the effort we spend. The downside is that we are no longer verifying the resulting object by loading it. In particular: 1. We never cross-check the "type" field given in the tag object with the type of the pointed-to object. If the tag says it points to a tag but doesn't, then we will keep peeling and realize the error. If the tag says it points to a non-tag but actually points to a tag, we will stop peeling and just advertise the pointed-to tag. 2. If we are missing the pointed-to object, we will not realize (because we never even look it up in the object db). However, both of these are errors in the object database, and both will be detected if a client actually requests the broken objects in question. So we are simply pushing the verification away from the advertising stage, and down to the actual fetching stage. On my test repo with 120K refs, this drops the time to advertise the refs from ~3.2s to ~2.0s. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * upload-pack: avoid parsing objects during ref advertisementJeff King2012-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we advertise a ref, the first thing we do is parse the pointed-to object. This gives us two things: 1. a "struct object" we can use to store flags 2. the type of the object, so we know whether we need to dereference it as a tag Instead, we can just use lookup_unknown_object to get an object struct, and then fill in just the type field using sha1_object_info (which, in the case of packed files, can find the information without actually inflating the object data). This can save time if you have a large number of refs, and the client isn't actually going to request those refs (e.g., because most of them are already up-to-date). The downside is that we are no longer verifying objects that we advertise by fully parsing them (however, we do still know we actually have them, because sha1_object_info must find them to get the type). While we might fail to detect a corrupt object here, if the client actually fetches the object, we will parse (and verify) it then. On a repository with 120K refs, the advertisement portion of upload-pack goes from ~3.4s to 3.2s (the failure to speed up more is largely due to the fact that most of these refs are tags, which need dereferenced to find the tag destination anyway). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | server_supports(): parse feature list more carefullyJunio C Hamano2012-01-08
|/ | | | | | | | | | | | | | | | | | We have been carefully choosing feature names used in the protocol extensions so that the vocabulary does not contain a word that is a substring of another word, so it is not a real problem, but we have recently added "quiet" feature word, which would mean we cannot later add some other word with "quiet" (e.g. "quiet-push"), which is awkward. Let's make sure that we can eventually be able to do so by teaching the clients and servers that feature words consist of non whitespace letters. This parser also allows us to later add features with parameters e.g. "feature=1.5" (parameter values need to be quoted for whitespaces, but we will worry about the detauls when we do introduce them). Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* i18n: add infrastructure for translating Git with gettextÆvar Arnfjörð Bjarmason2011-12-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the skeleton implementation of i18n in Git to one that can show localized strings to users for our C, Shell and Perl programs using either GNU libintl or the Solaris gettext implementation. This new internationalization support is enabled by default. If gettext isn't available, or if Git is compiled with NO_GETTEXT=YesPlease, Git falls back on its current behavior of showing interface messages in English. When using the autoconf script we'll auto-detect if the gettext libraries are installed and act appropriately. This change is somewhat large because as well as adding a C, Shell and Perl i18n interface we're adding a lot of tests for them, and for those tests to work we need a skeleton PO file to actually test translations. A minimal Icelandic translation is included for this purpose. Icelandic includes multi-byte characters which makes it easy to test various edge cases, and it's a language I happen to understand. The rest of the commit message goes into detail about various sub-parts of this commit. = Installation Gettext .mo files will be installed and looked for in the standard $(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to override that, but that's only intended to be used to test Git itself. = Perl Perl code that's to be localized should use the new Git::I18n module. It imports a __ function into the caller's package by default. Instead of using the high level Locale::TextDomain interface I've opted to use the low-level (equivalent to the C interface) Locale::Messages module, which Locale::TextDomain itself uses. Locale::TextDomain does a lot of redundant work we don't need, and some of it would potentially introduce bugs. It tries to set the $TEXTDOMAIN based on package of the caller, and has its own hardcoded paths where it'll search for messages. I found it easier just to completely avoid it rather than try to circumvent its behavior. In any case, this is an issue wholly internal Git::I18N. Its guts can be changed later if that's deemed necessary. See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for a further elaboration on this topic. = Shell Shell code that's to be localized should use the git-sh-i18n library. It's basically just a wrapper for the system's gettext.sh. If gettext.sh isn't available we'll fall back on gettext(1) if it's available. The latter is available without the former on Solaris, which has its own non-GNU gettext implementation. We also need to emulate eval_gettext() there. If neither are present we'll use a dumb printf(1) fall-through wrapper. = About libcharset.h and langinfo.h We use libcharset to query the character set of the current locale if it's available. I.e. we'll use it instead of nl_langinfo if HAVE_LIBCHARSET_H is set. The GNU gettext manual recommends using langinfo.h's nl_langinfo(CODESET) to acquire the current character set, but on systems that have libcharset.h's locale_charset() using the latter is either saner, or the only option on those systems. GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either, but MinGW and some others need to use libcharset.h's locale_charset() instead. =Credits This patch is based on work by Jeff Epler <jepler@unpythonic.net> who did the initial Makefile / C work, and a lot of comments from the Git mailing list, including Jonathan Nieder, Jakub Narebski, Johannes Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and others. [jc: squashed a small Makefile fix from Ramsay] Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jc/fetch-verify'Junio C Hamano2011-10-05
|\ | | | | | | | | | | | | * jc/fetch-verify: fetch: verify we have everything we need before updating our ref rev-list --verify-object list-objects: pass callback data to show_objects()
| * list-objects: pass callback data to show_objects()Junio C Hamano2011-09-01
| | | | | | | | | | | | | | | | | | | | | | The traverse_commit_list() API takes two callback functions, one to show commit objects, and the other to show other kinds of objects. Even though the former has a callback data parameter, so that the callback does not have to rely on global state, the latter does not. Give the show_objects() callback the same callback data parameter. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'jc/traverse-commit-list'Junio C Hamano2011-10-05
|\ \ | |/ | | | | | | | | | | * jc/traverse-commit-list: revision.c: update show_object_with_name() without using malloc() revision.c: add show_object_with_name() helper function rev-list: fix finish_object() call
| * revision.c: add show_object_with_name() helper functionJunio C Hamano2011-08-22
| | | | | | | | | | | | | | | | | | | | There are two copies of traverse_commit_list callback that show the object name followed by pathname the object was found, to produce output similar to "rev-list --objects". Unify them. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Sync with 1.7.6.1Junio C Hamano2011-08-24
|\ \ | | | | | | | | | Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | get_indexed_object can return NULL if nothing is in that slot; check for itBrian Harring2011-08-24
| | | | | | | | | | | | | | | | | | | | | | | | This fixes a segfault introduced by 051e400; via it, no longer able to trigger the http/smartserv race. Signed-off-by: Brian Harring <ferringb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Merge branch 'jc/maint-smart-http-race-upload-pack'Junio C Hamano2011-08-17
|\ \ \ | |/ / | | | | | | | | | * jc/maint-smart-http-race-upload-pack: helping smart-http/stateless-rpc fetch race
| * | helping smart-http/stateless-rpc fetch raceJunio C Hamano2011-08-08
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A request to fetch from a client over smart HTTP protocol is served in multiple steps. In the first round, the server side shows the set of refs it has and their values, and the client picks from them and sends "I want to fetch the history leading to these commits". When the server tries to respond to this second request, its refs may have progressed by a push from elsewhere. By design, we do not allow fetching objects that are not at the tip of an advertised ref, and the server rejects such a request. The client needs to try again, which is not ideal especially for a busy server. Teach upload-pack (which is the workhorse driven by git-daemon and smart http server interface) that it is OK for a smart-http client to ask for commits that are not at the tip of any advertised ref, as long as they are reachable from advertised refs. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | ref namespaces: Support remote repositories via upload-pack and receive-packJosh Triplett2011-07-11
|/ | | | | | | | | | | | | | | | | | | | | Change upload-pack and receive-pack to use the namespace-prefixed refs when working with the repository, and use the unprefixed refs when talking to the client, maintaining the masquerade. This allows clone, pull, fetch, and push to work with a suitably configured GIT_NAMESPACE. receive-pack advertises refs outside the current namespace as .have refs (as it currently does for refs in alternates), so that the client can use them to minimize data transfer but will otherwise ignore them. With appropriate configuration, this also allows http-backend to expose namespaces as multiple repositories with different paths. This only requires setting GIT_NAMESPACE, which http-backend passes through to upload-pack and receive-pack. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jamey Sharp <jamey@minilop.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jk/maint-upload-pack-shallow'Junio C Hamano2011-04-27
|\ | | | | | | | | * jk/maint-upload-pack-shallow: upload-pack: start pack-objects before async rev-list
| * upload-pack: start pack-objects before async rev-listJeff King2011-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a pthread-enabled version of upload-pack, there's a race condition that can cause a deadlock on the fflush(NULL) we call from run-command. What happens is this: 1. Upload-pack is informed we are doing a shallow clone. 2. We call start_async() to spawn a thread that will generate rev-list results to feed to pack-objects. It gets a file descriptor to a pipe which will eventually hook to pack-objects. 3. The rev-list thread uses fdopen to create a new output stream around the fd we gave it, called pack_pipe. 4. The thread writes results to pack_pipe. Outside of our control, libc is doing locking on the stream. We keep writing until the OS pipe buffer is full, and then we block in write(), still holding the lock. 5. The main thread now uses start_command to spawn pack-objects. Before forking, it calls fflush(NULL) to flush every stdio output buffer. It blocks trying to get the lock on pack_pipe. And we have a deadlock. The thread will block until somebody starts reading from the pipe. But nobody will read from the pipe until we finish flushing to the pipe. To fix this, we swap the start order: we start the pack-objects reader first, and then the rev-list writer after. Thus the problematic fflush(NULL) happens before we even open the new file descriptor (and even if it didn't, flushing should no longer block, as the reader at the end of the pipe is now active). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| |
| \
*-. \ Merge branches 'sp/maint-fetch-pack-stop-early' and ↵Junio C Hamano2011-03-29
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | 'sp/maint-upload-pack-stop-early' * sp/maint-fetch-pack-stop-early: enable "no-done" extension only when fetching over smart-http * sp/maint-upload-pack-stop-early: enable "no-done" extension only when serving over smart-http
| | * enable "no-done" extension only when serving over smart-httpJunio C Hamano2011-03-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not advertise no-done capability when upload-pack is not serving over smart-http, as there is no way for this server to know when it should stop reading in-flight data from the client, even though it is necessary to drain all the in-flight data in order to unblock the client. Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Shawn O. Pearce <spearce@spearce.org>
* | | Revert two "no-done" revertsJunio C Hamano2011-03-29
| | | | | | | | | | | | | | | | | | | | | | | | Last night I had to make these two emergency reverts, but now we have a better understanding of which part of the topic was broken, let's get rid of the revert to fix it correctly. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Revert "upload-pack: Implement no-done capability"Junio C Hamano2011-03-28
| | | | | | | | | | | | | | | | | | | | | | | | This reverts 3e63b21 (upload-pack: Implement no-done capability, 2011-03-14). Together with 761ecf0 (fetch-pack: Implement no-done capability, 2011-03-14) it seems to make the fetch-pack process out of sync and makes it keep talking long after upload-pack stopped listening to it, terminating the process with SIGPIPE.
* | | Merge branch 'sp/maint-upload-pack-stop-early'Junio C Hamano2011-03-22
|\ \ \ | | |/ | |/| | | | | | | | | | * sp/maint-upload-pack-stop-early: upload-pack: Implement no-done capability upload-pack: More aggressively send 'ACK %s ready'
| * | upload-pack: Implement no-done capabilityShawn O. Pearce2011-03-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the client requests both multi_ack_detailed and no-done then upload-pack is free to immediately send a PACK following its first 'ACK %s ready' message. The upload-pack response actually winds up being: ACK %s common ... (maybe more) ... ACK %s ready NAK ACK %s PACK.... the pack stream .... For smart HTTP connections this saves one HTTP RPC, reducing the overall latency for a trivial fetch. For git:// and ssh:// a no-done option slightly reduces latency by removing one server->client->server round-trip at the end of the common ancestor negotiation. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | upload-pack: More aggressively send 'ACK %s ready'Shawn O. Pearce2011-03-14
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a client is merely following the remote (and has not made any new commits itself), all "have %s" lines sent by the client will be common to the server. As all lines are common upload-pack never calls ok_to_give_up() and does not compute if it has a good cut point in the commit graph. Without this computation the following client is going to send all tagged commits, as these were determined to be COMMON_REF during the initial advertisement, but the client does not parse their history to transitively pass the COMMON flag and empty its queue of commits. For git.git with 339 commit tags, it takes clients 11 rounds of negotation to fully send all tagged commits and exhaust its queue of things to send as common. This is pretty slow for a client that has not done any local development activity. Force computing ok_to_give_up() and send "ACK %s ready" at the end of the current round if this round only contained common objects and ok_to_give_up() was therefore not called. This may allow the client to break early, avoiding transmission of the COMMON_REFs. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | add packet tracing debug codeJeff King2011-03-08
|/ | | | | | | | | | | | | | | | | | | | | | | | | This shows a trace of all packets coming in or out of a given program. This can help with debugging object negotiation or other protocol issues. To keep the code changes simple, we operate at the lowest level, meaning we don't necessarily understand what's in the packets. The one exception is a packet starting with "PACK", which causes us to skip that packet and turn off tracing (since the gigantic pack data will not be interesting to read, at least not in the trace format). We show both written and read packets. In the local case, this may mean you will see packets twice (written by the sender and read by the receiver). However, for cases where the other end is remote, this allows you to see the full conversation. Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>, where <foo> takes the same arguments as GIT_TRACE. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit: Add commit_list prefix in two function names.Thiago Farina2010-11-29
| | | | | | | | Add commit_list prefix to insert_by_date function and to sort_by_date, so it's clear that these functions refer to commit_list structure. Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Use angles for placeholders consistentlyŠtěpán Němec2010-10-08
| | | | | | Signed-off-by: Štěpán Němec <stepnem@gmail.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* object.h: Add OBJECT_ARRAY_INIT macro and make use of it.Thiago Farina2010-08-29
| | | | | Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* upload-pack: Improve error message when bad ref requestedElijah Newren2010-08-02
| | | | | | | | | When printing an error message saying a ref was requested that we do not have, only print that ref, rather than the ref and everything sent to us on the same packet line (e.g. protocol support specifications). Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* upload-pack: remove unused "create_full_pack" code in do_rev_listNguyễn Thái Ngọc Duy2010-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | A bit of history in chronological order, the newest at bottom: - 80ccaa7 (upload-pack: Move the revision walker into a separate function.) do_rev_list was introduced with create_full_pack argument - 21edd3f (upload-pack: Run rev-list in an asynchronous function.) do_rev_list was now called by start_async, create_full_pack was passed by rev_list.data - f0cea83 (Shift object enumeration out of upload-pack) rev_list.data was now zero permanently. Creating full pack was done by passing --all to pack-objects - ae6a560 (run-command: support custom fd-set in async) rev_list.data = 0 was found out redudant and got rid of. Get rid of the code as well, for less headache while reading do_rev_list. [jc: noticed by Elijah Newren] Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* run-command: support custom fd-set in asyncErik Faye-Lund2010-02-05
| | | | | | | | | | | | | | | | | | | | | | This patch adds the possibility to supply a set of non-0 file descriptors for async process communication instead of the default-created pipe. Additionally, we now support bi-directional communiction with the async procedure, by giving the async function both read and write file descriptors. To retain compatiblity and similar "API feel" with start_command, we require start_async callers to set .out = -1 to get a readable file descriptor. If either of .in or .out is 0, we supply no file descriptor to the async process. [sp: Note: Erik started this patch, and a huge bulk of it is his work. All bugs were introduced later by Shawn.] Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Sync with 1.6.5.6Junio C Hamano2009-12-10
|\ | | | | | | Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Remove post-upload-hookJunio C Hamano2009-12-10
| | | | | | | | | | | | | | This hook runs after "git fetch" in the repository the objects are fetched from as the user who fetched, and has security implications. Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Merge branch 'np/maint-sideband-favor-status' into maintJunio C Hamano2009-12-03
| |\ | | | | | | | | | | | | * np/maint-sideband-favor-status: give priority to progress messages
* | \ Merge branch 'sp/smart-http'Junio C Hamano2009-11-20
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * sp/smart-http: (37 commits) http-backend: Let gcc check the format of more printf-type functions. http-backend: Fix access beyond end of string. http-backend: Fix bad treatment of uintmax_t in Content-Length t5551-http-fetch: Work around broken Accept header in libcurl t5551-http-fetch: Work around some libcurl versions http-backend: Protect GIT_PROJECT_ROOT from /../ requests Git-aware CGI to provide dumb HTTP transport http-backend: Test configuration options http-backend: Use http.getanyfile to disable dumb HTTP serving test smart http fetch and push http tests: use /dumb/ URL prefix set httpd port before sourcing lib-httpd t5540-http-push: remove redundant fetches Smart HTTP fetch: gzip requests Smart fetch over HTTP: client side Smart push over HTTP: client side Discover refs via smart HTTP server when available http-backend: more explict LocationMatch http-backend: add example for gitweb on same URL http-backend: use mod_alias instead of mod_rewrite ... Conflicts: .gitignore remote-curl.c
| * | | Add stateless RPC options to upload-pack, receive-packShawn O. Pearce2009-11-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When --stateless-rpc is passed as a command line parameter to upload-pack or receive-pack the programs now assume they may perform only a single read-write cycle with stdin and stdout. This fits with the HTTP POST request processing model where a program may read the request, write a response, and must exit. When --advertise-refs is passed as a command line parameter only the initial ref advertisement is output, and the program exits immediately. This fits with the HTTP GET request model, where no request content is received but a response must be produced. HTTP headers and/or environment are not processed here, but instead are assumed to be handled by the program invoking either service backend. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | Add multi_ack_detailed capability to fetch-pack/upload-packShawn O. Pearce2009-10-30
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When multi_ack_detailed is enabled the ACK continue messages returned by the remote upload-pack are broken out to describe the different states within the peer. This permits the client to better understand the server's in-memory state. The fetch-pack/upload-pack protocol now looks like: NAK --------------------------------- Always sent in response to "done" if there was no common base selected from the "have" lines (or no have lines were sent). * no multi_ack or multi_ack_detailed: Sent when the client has sent a pkt-line flush ("0000") and the server has not yet found a common base object. * either multi_ack or multi_ack_detailed: Always sent in response to a pkt-line flush. ACK %s ----------------------------------- * no multi_ack or multi_ack_detailed: Sent in response to "have" when the object exists on the remote side and is therefore an object in common between the peers. The argument is the SHA-1 of the common object. * either multi_ack or multi_ack_detailed: Sent in response to "done" if there are common objects. The argument is the last SHA-1 determined to be common. ACK %s continue ----------------------------------- * multi_ack only: Sent in response to "have". The remote side wants the client to consider this object as common, and immediately stop transmitting additional "have" lines for objects that are reachable from it. The reason the client should stop is not given, but is one of the two cases below available under multi_ack_detailed. ACK %s common ----------------------------------- * multi_ack_detailed only: Sent in response to "have". Both sides have this object. Like with "ACK %s continue" above the client should stop sending have lines reachable for objects from the argument. ACK %s ready ----------------------------------- * multi_ack_detailed only: Sent in response to "have". The client should stop transmitting objects which are reachable from the argument, and send "done" soon to get the objects. If the remote side has the specified object, it should first send an "ACK %s common" message prior to sending "ACK %s ready". Clients may still submit additional "have" lines if there are more side branches for the client to explore that might be added to the common set and reduce the number of objects to transfer. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Merge branch 'np/maint-sideband-favor-status'Junio C Hamano2009-11-17
|\ \ \ | |/ / |/| / | |/ | | * np/maint-sideband-favor-status: give priority to progress messages
| * give priority to progress messagesNicolas Pitre2009-11-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In theory it is possible for sideband channel #2 to be delayed if pack data is quick to come up for sideband channel #1. And because data for channel #2 is read only 128 bytes at a time while pack data is read 8192 bytes at a time, it is possible for many pack blocks to be sent to the client before the progress message fifo is emptied, making the situation even worse. This would result in totally garbled progress display on the client's console as local progress gets mixed with partial remote progress lines. Let's prevent such situations by giving transmission priority to progress messages over pack data at all times. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * Merge branch 'lt/pack-object-memuse' into maintJunio C Hamano2009-05-03
| |\ | | | | | | | | | | | | | | | * lt/pack-object-memuse: show_object(): push path_name() call further down process_{tree,blob}: show objects without buffering
* | | don't dereference NULL upon fdopen failureJim Meyering2009-09-13
| | | | | | | | | | | | | | | | | | | | | | | | There were several unchecked use of fdopen(); replace them with xfdopen() that checks and dies. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | use write_str_in_full helper to avoid literal string lengthsJim Meyering2009-09-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 2d14d65 (Use a clearer style to issue commands to remote helpers, 2009-09-03) I happened to notice two changes like this: - write_in_full(helper->in, "list\n", 5); + + strbuf_addstr(&buf, "list\n"); + write_in_full(helper->in, buf.buf, buf.len); + strbuf_reset(&buf); IMHO, it would be better to define a new function, static inline ssize_t write_str_in_full(int fd, const char *str) { return write_in_full(fd, str, strlen(str)); } and then use it like this: - strbuf_addstr(&buf, "list\n"); - write_in_full(helper->in, buf.buf, buf.len); - strbuf_reset(&buf); + write_str_in_full(helper->in, "list\n"); Thus not requiring the added allocation, and still avoiding the maintenance risk of literal string lengths. These days, compilers are good enough that strlen("literal") imposes no run-time cost. Transformed via this: perl -pi -e \ 's/write_in_full\((.*?), (".*?"), \d+\)/write_str_in_full($1, $2)/'\ $(git grep -l 'write_in_full.*"') Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | Merge branch 'jc/upload-pack-hook'Junio C Hamano2009-09-07
|\ \ \ | | | | | | | | | | | | | | | | | | | | * jc/upload-pack-hook: upload-pack: feed "kind [clone|fetch]" to post-upload-pack hook upload-pack: add a trigger for post-upload-pack hook
| * | | upload-pack: feed "kind [clone|fetch]" to post-upload-pack hookJunio C Hamano2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A request to clone the repository does not give any "have" but asks for all the refs we offer with "want". When a request does not ask to clone the repository fully, but asks to fetch some refs into an empty repository, it will not give any "have" but its "want" won't ask for all the refs we offer. If we suppose (and I would say this is a rather big if) that it makes sense to distinguish these two cases, a hook cannot reliably do this alone. The hook can detect lack of "have" and bunch of "want", but there is no direct way to tell if the other end asked for all refs we offered, or merely most of them. Between the time we talked with the other end and the time the hook got called, we may have acquired more refs or lost some refs in the repository by concurrent operations. Given that we plan to introduce selective advertisement of refs with a protocol extension, it would become even more difficult for hooks to guess between these two cases. This adds "kind [clone|fetch]" to hook's input, as a stable interface to allow the hooks to tell these cases apart. Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * | | upload-pack: add a trigger for post-upload-pack hookJunio C Hamano2009-08-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After upload-pack successfully finishes its operation, post-upload-pack hook can be called for logging purposes. The hook is passed various pieces of information, one per line, from its standard input. Currently the following items can be fed to the hook, but more types of information may be added in the future: want SHA-1:: 40-byte hexadecimal object name the client asked to include in the resulting pack. Can occur one or more times in the input. have SHA-1:: 40-byte hexadecimal object name the client asked to exclude from the resulting pack, claiming to have them already. Can occur zero or more times in the input. time float:: Number of seconds spent for creating the packfile. size decimal:: Size of the resulting packfile in bytes. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | Merge branch 'np/maint-1.6.3-deepen'Junio C Hamano2009-09-07
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | * np/maint-1.6.3-deepen: pack-objects: free preferred base memory after usage make shallow repository deepening more network efficient
| * | | | make shallow repository deepening more network efficientNicolas Pitre2009-09-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First of all, I can't find any reason why thin pack generation is explicitly disabled when dealing with a shallow repository. The possible delta base objects are collected from the edge commits which are always obtained through history walking with the same shallow refs as the client, Therefore the client is always going to have those base objects available. So let's remove that restriction. Then we can make shallow repository deepening much more efficient by using the remote's unshallowed commits as edge commits to get preferred base objects for thin pack generation. On git.git, this makes the data transfer for the deepening of a shallow repository from depth 1 to depth 2 around 134 KB instead of 3.68 MB. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | | Style fixes, add a space after if/for/while.Brian Gianforcaro2009-08-31
| |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of code in core git appears to use a single space after if/for/while. This is an attempt to bring more code to this standard. These are entirely cosmetic changes. Signed-off-by: Brian Gianforcaro <b.gianfo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | | | Merge branch 'cc/replace'Junio C Hamano2009-08-21
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * cc/replace: t6050: check pushing something based on a replaced commit Documentation: add documentation for "git replace" Add git-replace to .gitignore builtin-replace: use "usage_msg_opt" to give better error messages parse-options: add new function "usage_msg_opt" builtin-replace: teach "git replace" to actually replace Add new "git replace" command environment: add global variable to disable replacement mktag: call "check_sha1_signature" with the replacement sha1 replace_object: add a test case object: call "check_sha1_signature" with the replacement sha1 sha1_file: add a "read_sha1_file_repl" function replace_object: add mechanism to replace objects found in "refs/replace/" refs: add a "for_each_replace_ref" function
| * | | | environment: add global variable to disable replacementChristian Couder2009-05-31
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new "read_replace_refs" global variable is set to 1 by default, so that replace refs are used by default. But reachability traversal and packing commands ("cmd_fsck", "cmd_prune", "cmd_pack_objects", "upload_pack", "cmd_unpack_objects") set it to 0, as they must work with the original DAG. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>