aboutsummaryrefslogtreecommitdiff
path: root/wt-status.c
Commit message (Collapse)AuthorAge
* Clean up use of ANSI color sequencesArjen Laarhoven2009-02-13
| | | | | | | | Remove the literal ANSI escape sequences and replace them by readable constants. Signed-off-by: Arjen Laarhoven <arjen@yaph.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* reorder ALLOW_TEXTCONV option settingJeff King2008-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | Right now for the diff porcelain and the log family, we call: init_revisions(); setup_revisions(); DIFF_OPT_SET(ALLOW_TEXTCONV); However, that means textconv will _always_ be on, instead of being a default that can be manipulated with setup_revisions. Instead, we want: init_revisions(); DIFF_OPT_SET(ALLOW_TEXTCONV); setup_revisions(); which is what this patch does. We'll go ahead and move the callsite in wt-status, also; even though the user can't pass any options here, it is a cleanup that will help avoid any surprise later if the setup_revisions line is changed. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jk/commit-v-strip'Junio C Hamano2008-11-16
|\ | | | | | | | | | | | | * jk/commit-v-strip: status: show "-v" diff even for initial commit wt-status: refactor initial commit printing define empty tree sha1 as a macro
| * status: show "-v" diff even for initial commitJeff King2008-11-12
| | | | | | | | | | | | | | | | | | Since we can use the same "diff against empty tree" trick as we do for the non-initial case, it is trivial to make this work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * wt-status: refactor initial commit printingJeff King2008-11-12
| | | | | | | | | | | | | | | | | | | | When we showed the initial commit, we had no reference to diff against, so we went through the cache manually. Nowadays, however, we have a virtual empty tree commit, so we can simply diff against that to get the same results. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | enable textconv for diff in verbose status/commitJeff King2008-10-26
| | | | | | | | | | | | | | | | | | This diff is meant for human consumption, so it makes sense to apply text conversion here, as we would for the regular diff porcelain. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | wt-status: load diff ui configJeff King2008-10-26
|/ | | | | | | | | | | | | | | | When "git status -v" shows a diff, we did not respect the user's usual diff preferences at all. Loading just git_diff_basic_config would give us things like rename limits and diff drivers. But it makes even more sense to load git_diff_ui_config, which gives us colorization if the user has requested it. Note that we need to take special care to cancel colorization when writing to the commit template file, as described in the code comments. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jk/maint-ls-files-other' into jk/fix-ls-files-otherJunio C Hamano2008-10-17
|\ | | | | | | | | | | | | | | * jk/maint-ls-files-other: refactor handling of "other" files in ls-files and status Conflicts: read-cache.c
| * refactor handling of "other" files in ls-files and statusJeff King2008-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the "git status" display code was originally converted to C, we copied the code from ls-files to discover whether a pathname returned by read_directory was an "other", or untracked, file. Much later, 5698454e updated the code in ls-files to handle some new cases caused by gitlinks. This left the code in wt-status.c broken: it would display submodule directories as untracked directories. Nobody noticed until now, however, because unless status.showUntrackedFiles was set to "all", submodule directories were not actually reported by read_directory. So the bug was only triggered in the presence of a submodule _and_ this config option. This patch pulls the ls-files code into a new function, cache_name_is_other, and uses it in both places. This should leave the ls-files functionality the same and fix the bug in status. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Replace calls to strbuf_init(&foo, 0) with STRBUF_INIT initializerBrandon Casey2008-10-12
| | | | | | | | | | | | | | | | | | | | | | Many call sites use strbuf_init(&foo, 0) to initialize local strbuf variable "foo" which has not been accessed since its declaration. These can be replaced with a static initialization using the STRBUF_INIT macro which is just as readable, saves a function call, and takes up fewer lines. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* | wt-status: Teach how to discard changes in the working directoryAnders Melchiorsen2008-09-07
| | | | | | | | | | | | This is a question that comes up a lot in #git. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | wt-status: Split header generation into three functionsAnders Melchiorsen2008-09-07
|/ | | | | | | | | | Reorganize header generation so that all header text related to each block is in one place. This adds a function, but makes it easier to see what is generated in each case. It also allows for easy tweaking of individual headers. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'jc/report-tracking'Junio C Hamano2008-07-13
|\ | | | | | | | | | | | | | | | | * jc/report-tracking: branch -r -v: do not spit out garbage stat_tracking_info(): clear object flags used during counting git-branch -v: show the remote tracking statistics git-status: show the remote tracking statistics Refactor "tracking statistics" code used by "git checkout"
| * git-status: show the remote tracking statisticsJunio C Hamano2008-07-02
| | | | | | | | | | | | | | | | | | | | This teaches "git status" to show the same remote tracking statistics "git checkout" gives at the beginning of the output. Now the necessary low-level machinery is properly factored out, we can do this quite cleanly. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Fix "config_error_nonbool" used with value instead of keyChristian Couder2008-07-05
|/ | | | | | | | | | | | | | | | The function "config_error_nonbool", that is defined in "config.c", is used to report an error when a config key in the config file should have a corresponding value but it hasn't. So the parameter to this function should be the key and not the value, because the value is undefined. And it could crash if the value is used. This patches fixes two occurences where the value was passed instead of the key. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Add configuration option for default untracked files modeMarius Storm-Olsen2008-06-09
| | | | | | By default, the untracked files mode for commit/status is 'normal' Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
* Add argument 'no' commit/status option -u|--untracked-filesMarius Storm-Olsen2008-06-09
| | | | | | | This new argument teaches Git to not look for any untracked files, saving cycles on slow file systems, or large repos. Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
* Add an optional <mode> argument to commit/status -u|--untracked-files optionMarius Storm-Olsen2008-06-09
| | | | | | | | | | | | This lets you specify how you want untracked files to be listed. The possible options are: normal - Show untracked files and directories all - Show all untracked files The 'all' mode is used, if the mode is not specified. Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
* Merge branch 'js/config-cb'v1.5.6-rc0Junio C Hamano2008-05-25
|\ | | | | | | | | | | | | | | | | | | * js/config-cb: Provide git_config with a callback-data parameter Conflicts: builtin-add.c builtin-cat-file.c
| * Provide git_config with a callback-data parameterJohannes Schindelin2008-05-14
| | | | | | | | | | | | | | | | | | | | | | | | git_config() only had a function parameter, but no callback data parameter. This assumes that all callback functions only modify global variables. With this patch, every callback gets a void * parameter, and it is hoped that this will help the libification effort. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Updated status to show 'Not currently on any branch' in redChris Parsons2008-05-22
| | | | | | | | | | | | | | | | | | This provides additional warning to users when attempting to commit to a detached HEAD. It is configurable in color.status.nobranch. Signed-off-by: Chris Parsons <chris@edendevelopment.co.uk> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | bump rename limit defaultsJeff King2008-05-03
|/ | | | | | | | | | | | | | | | | The current rename limit default of 100 was arbitrarily chosen. Testing[1] has shown that on modern hardware, a limit of 200 adds about a second of computation time, and a limit of 500 adds about 5 seconds of computation time. This patch bumps the default limit to 200 for viewing diffs, and to 500 for performing a merge. The limit for generating git-status templates is set independently; we bump it up to 200 here, as well, to match the diff limit. [1]: See <20080211113516.GB6344@coredump.intra.peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin-status: submodule summary supportPing Yin2008-04-12
| | | | | | | | | | | | | | | | | | | | | | This commit teaches 'git commit/status' show a new 'Modified submodules' section, which is an output from: git submodule summary --cached --for-status --summary-limit <limit> just before the 'Untracked files' section. The <limit> is given by the config variable status.submodulesummary to limit the submodule summary size. status.submodulesummary is a bool/int variable with value: - false or 0 by default to disable the summary, or - positive number to limit the summary size, or - true or negative number to unlimit the summary size. Also mention status.submodulesummary in the documentation. Signed-off-by: Ping Yin <pkufranky@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wt-status.c: no need for dup() dance anymoreKristian Høgsberg2008-03-14
| | | | | | | Now we can generate diff to a file descriptor, we do not have to dup() the stdout around when writing the status output. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Make private quote_path() in wt-status.c available as quote_path_relative()Dmitry Potapov2008-03-07
| | | | | | | | | | | | Move quote_path() from wt-status.c to quote.c and rename it as quote_path_relative(), because it is a better name for a public function. Also, instead of handcrafted quoting, quote_c_style_counted() is now used, to make its quoting more consistent with the rest of the system, also honoring core.quotepath specified in configuration. Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Add color.ui variable which globally enables colorization if setMatthias Kestenholz2008-02-18
| | | | | Signed-off-by: Matthias Kestenholz <mk@spinlock.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'maint'Junio C Hamano2008-02-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | * maint: config: add test cases for empty value and no value config variables. cvsimport: have default merge regex also match beginning of commit message git clone -s documentation: force a new paragraph for the NOTE status: suggest "git rm --cached" to unstage for initial commit Protect get_author_ident_from_commit() from filenames in work tree upload-pack: Initialize the exec-path. bisect: use verbatim commit subject in the bisect log git-cvsimport.txt: fix '-M' description. Revert "pack-objects: only throw away data during memory pressure"
| * status: suggest "git rm --cached" to unstage for initial commitJeff King2008-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It makes no sense to suggest "git reset HEAD" since we have no HEAD commit. This actually used to work but regressed in f26a0012. wt_status_print_cached_header was updated to take the whole wt_status struct rather than just the reference field. Previously the various code paths were sometimes sending in s->reference and sometimes sending in NULL, making the decision on whether this was an initial commit before we even got to this function. Now we must check the initial flag here. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Merge branch 'lt/in-core-index'Junio C Hamano2008-02-11
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | * lt/in-core-index: lazy index hashing Create pathname-based hash-table lookup into index read-cache.c: introduce is_racy_timestamp() helper read-cache.c: fix a couple more CE_REMOVE conversion Also use unpack_trees() in do_diff_cache() Make run_diff_index() use unpack_trees(), not read_tree() Avoid running lstat(2) on the same cache entry. index: be careful when handling long names Make on-disk index representation separate from in-core one
| * Make run_diff_index() use unpack_trees(), not read_tree()Linus Torvalds2008-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A plain "git commit" would still run lstat() a lot more than necessary, because wt_status_print() would cause the index to be repeatedly flushed and re-read by wt_read_cache(), and that would cause the CE_UPTODATE bit to be lost, resulting in the files in the index being lstat'ed three times each. The reason why wt-status.c ended up invalidating and re-reading the cache multiple times was that it uses "run_diff_index()", which in turn uses "read_tree()" to populate the index with *both* the old index and the tree we want to compare against. So this patch re-writes run_diff_index() to not use read_tree(), but instead use "unpack_trees()" to diff the index to a tree. That, in turn, means that we don't need to modify the index itself, which then means that we don't need to invalidate it and re-read it! This, together with the lstat() optimizations, means that "git commit" on the kernel tree really only needs to lstat() the index entries once. That noticeably cuts down on the cached timings. Best time before: [torvalds@woody linux]$ time git commit > /dev/null real 0m0.399s user 0m0.232s sys 0m0.164s Best time after: [torvalds@woody linux]$ time git commit > /dev/null real 0m0.254s user 0m0.140s sys 0m0.112s so it's a noticeable improvement in addition to being a nice conceptual cleanup (it's really not that pretty that "run_diff_index()" dirties the index!) Doing an "strace -c" on it also shows that as it cuts the number of lstat() calls by two thirds, it goes from being lstat()-limited to being limited by getdents() (which is the readdir system call): Before: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 60.69 0.000704 0 69230 31 lstat 23.62 0.000274 0 5522 getdents 8.36 0.000097 0 5508 2638 open 2.59 0.000030 0 2869 close 2.50 0.000029 0 274 write 1.47 0.000017 0 2844 fstat After: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 45.17 0.000276 0 5522 getdents 26.51 0.000162 0 23112 31 lstat 19.80 0.000121 0 5503 2638 open 4.91 0.000030 0 2864 close 1.48 0.000020 0 274 write 1.34 0.000018 0 2844 fstat ... It passes the test-suite for me, but this is another of one of those really core functions, and certainly pretty subtle, so.. NOTE! The Linux lstat() system call is really quite cheap when everything is cached, so the fact that this is quite noticeable on Linux is likely to mean that it is *much* more noticeable on other operating systems. I bet you'll see a much bigger performance improvement from this on Windows in particular. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | wt-status.c: guard config parser from value=NULLJunio C Hamano2008-02-11
|/ | | | | | status.color.* and color.status.* expect a string value Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git-commit: squelch needless message during an empty mergeJunio C Hamano2007-12-12
| | | | | | | | | | | | | | | | | | | | | | | When recording a merge that conflicted and ends up in no changes after manual resolution, commit callchain looked like this: cmd_commit() -> prepare_log_message() -> run_status() -> wt_status_print() This invocation of run_status() is asked to find out if there is a committable change, but it unconditionally gave instructions such as "use git-add" at the same time. When in merge, we do allow an empty change to be recorded, so after showing this message the code still went ahead and made a commit. This introduces "nowarn" parameter to run_status() to avoid these useless messages. If we are not allowed to create an empty commit, we already call run_status() again in the original codepath, and the message will be shown from that call anyway. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* add status.relativePaths config variableJeff King2007-12-08
| | | | | | | | | The output of git-status was recently changed to output relative paths. Setting this variable to false restores the old behavior for any old-timers that prefer it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wt-status.c:quote_path(): convert empty path to "./"Jeff King2007-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we are correctly removing leading prefixes from files in git status, there is a degenerate case: the directory matching the prefix. Because we show only the directory name for a directory that contains only untracked files, it gets collapsed to an empty string. Example: $ git init $ mkdir subdir $ touch subdir/file $ git status ... # Untracked files: # (use "git add <file>..." to include in what will be committed) # # subdir/ So far, so good. $ cd subdir $ git status .... # Untracked files: # (use "git add <file>..." to include in what will be committed) # # Oops, that's a bit confusing. This patch prints './' to show that there is some output. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git config --get-colorboolJunio C Hamano2007-12-05
| | | | | | | | | | | | | | | | | | | | | | This adds an option to help scripts find out color settings from the configuration file. git config --get-colorbool color.diff inspects color.diff variable, and exits with status 0 (i.e. success) if color is to be used. It exits with status 1 otherwise. If a script wants "true"/"false" answer to the standard output of the command, it can pass an additional boolean parameter to its command line, telling if its standard output is a terminal, like this: git config --get-colorbool color.diff true When called like this, the command outputs "true" to its standard output if color is to be used (i.e. "color.diff" says "always", "auto", or "true"), and "false" otherwise. Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'kh/commit'Junio C Hamano2007-12-04
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * kh/commit: (33 commits) git-commit --allow-empty git-commit: Allow to amend a merge commit that does not change the tree quote_path: fix collapsing of relative paths Make git status usage say git status instead of git commit Fix --signoff in builtin-commit differently. git-commit: clean up die messages Do not generate full commit log message if it is not going to be used Remove git-status from list of scripts as it is builtin Fix off-by-one error when truncating the diff out of the commit message. builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well. Add a few more tests for git-commit builtin-commit: Include the diff in the commit message when verbose. builtin-commit: fix partial-commit support Fix add_files_to_cache() to take pathspec, not user specified list of files Export three helper functions from ls-files builtin-commit: run commit-msg hook with correct message file builtin-commit: do not color status output shown in the message template file_exists(): dangling symlinks do exist Replace "runstatus" with "status" in the tests t7501-commit: Add test for git commit <file> with dirty index. ...
| * quote_path: fix collapsing of relative pathsJeff King2007-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code tries to collapse identical leading components between the prefix and the path. So if we're in "dir1", the path "dir1/file" should become just "file". However, we were ending up with "../dir1/file". The included test expected the wrong output. The "len" parameter to quote_path can be negative to mean "this is a NUL terminated string". Simply count it so that the loop can rely on it being the length of the path. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * builtin-commit: Include the diff in the commit message when verbose.Kristian Høgsberg2007-11-22
| | | | | | | | | | | | | | | | run_diff_index() and the entire diff machinery is hard coded to output to stdout, so just redirect that and restore it when done. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
| * git status: show relative paths when run in a subdirectoryJohannes Schindelin2007-11-22
| | | | | | | | | | | | | | | | | | | | To show the relative paths, the function formerly called quote_crlf() (now called quote_path()) takes the prefix as an additional argument. While at it, the static buffers were replaced by strbufs. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* | Enable rewrite as well as rename detection in git-statusJeff King2007-12-02
|/ | | | Signed-off-by: Junio C Hamano <gitster@pobox.com>
* core.excludesfile clean-upJunio C Hamano2007-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are inconsistencies in the way commands currently handle the core.excludesfile configuration variable. The problem is the variable is too new to be noticed by anything other than git-add and git-status. * git-ls-files does not notice any of the "ignore" files by default, as it predates the standardized set of ignore files. The calling scripts established the convention to use .git/info/exclude, .gitignore, and later core.excludesfile. * git-add and git-status know about it because they call add_excludes_from_file() directly with their own notion of which standard set of ignore files to use. This is just a stupid duplication of code that need to be updated every time the definition of the standard set of ignore files is changed. * git-read-tree takes --exclude-per-directory=<gitignore>, not because the flexibility was needed. Again, this was because the option predates the standardization of the ignore files. * git-merge-recursive uses hardcoded per-directory .gitignore and nothing else. git-clean (scripted version) does not honor core.* because its call to underlying ls-files does not know about it. git-clean in C (parked in 'pu') doesn't either. We probably could change git-ls-files to use the standard set when no excludes are specified on the command line and ignore processing was asked, or something like that, but that will be a change in semantics and might break people's scripts in a subtle way. I am somewhat reluctant to make such a change. On the other hand, I think it makes perfect sense to fix git-read-tree, git-merge-recursive and git-clean to follow the same rule as other commands. I do not think of a valid use case to give an exclude-per-directory that is nonstandard to read-tree command, outside a "negative" test in the t1004 test script. This patch is the first step to untangle this mess. The next step would be to teach read-tree, merge-recursive and clean (in C) to use setup_standard_excludes(). Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Enable wt-status to run against non-standard index file.Kristian Høgsberg2007-09-19
| | | | | | | | We still default to get_index_file(), but this can be overridden by setting wt_status.index_file after calling wt_status_prepare(). Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Enable wt-status output to a given FILE pointer.Kristian Høgsberg2007-09-19
| | | | | | | | Still defaults to stdout, but you can now override wt_status.fp after calling wt_status_prepare(). Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Fix the rename detection limit checkingLinus Torvalds2007-09-14
| | | | | | | | | | | | | | | | | | | | | | | | This adds more proper rename detection limits. Instead of just checking the limit against the number of potential rename destinations, we verify that the rename matrix (which is what really matters) doesn't grow ridiculously large, and we also make sure that we don't overflow when doing the matrix size calculation. This also changes the default limits from unlimited, to a rename matrix that is limited to 100 entries on a side. You can raise it with the config entry, or by using the "-l<n>" command line flag, but at least the default is now a sane number that avoids spending lots of time (and memory) in situations that likely don't merit it. The choice of default value is of course very debatable. Limiting the rename matrix to a 100x100 size will mean that even if you have just one obvious rename, but you also create (or delete) 10,000 files, the rename matrix will be so big that we disable the heuristics. Sounds reasonable to me, but let's see if people hit this (and, perhaps more importantly, actually *care*) in real life. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Missing statics.Pierre Habouzit2007-06-08
| | | | | Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Merge branch 'maint-1.5.1' into maintJunio C Hamano2007-05-21
|\ | | | | | | | | | | | | * maint-1.5.1: git-status: respect core.excludesFile SubmittingPatches: mention older C compiler compatibility git-daemon: don't ignore pid-file write failure
| * git-status: respect core.excludesFileJohannes Schindelin2007-05-21
| | | | | | | | | | | | | | | | | | | | git-add reads this variable, and honours the contents of that file if that exists. Match this behaviour in git-status, too. Noticed by Evan Carroll on IRC. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
* | Optimize directory listing with pathspec limiter.Linus Torvalds2007-03-31
|/ | | | | | | | | | | | | | | | | | | | | | | | | The way things are set up, you can now pass a "pathspec" to the "read_directory()" function. If you pass NULL, it acts exactly like it used to do (read everything). If you pass a non-NULL pointer, it will simplify it into a "these are the prefixes without any special characters", and stop any readdir() early if the path in question doesn't match any of the prefixes. NOTE! This does *not* obviate the need for the caller to do the *exact* pathspec match later. It's a first-level filter on "read_directory()", but it does not do the full pathspec thing. Maybe it should. But in the meantime, builtin-add.c really does need to do first read_directory(dir, .., pathspec); if (pathspec) prune_directory(dir, pathspec, baselen); ie the "prune_directory()" part will do the *exact* pathspec pruning, while the "read_directory()" will use the pathspec just to do some quick high-level pruning of the directories it will recurse into. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* Merge branch 'master' into js/diff-niJunio C Hamano2007-02-26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master: (201 commits) Documentation: link in 1.5.0.2 material to the top documentation page. Documentation: document remote.<name>.tagopt GIT 1.5.0.2 git-remote: support remotes with a dot in the name Documentation: describe "-f/-t/-m" options to "git-remote add" diff --cc: fix display of symlink conflicts during a merge. merge-recursive: fix longstanding bug in merging symlinks merge-index: fix longstanding bug in merging symlinks diff --cached: give more sensible error message when HEAD is yet to be created. Update tests to use test-chmtime Add test-chmtime: a utility to change mtime on files Add Release Notes to prepare for 1.5.0.2 Allow arbitrary number of arguments to git-pack-objects rerere: do not deal with symlinks. rerere: do not skip two conflicted paths next to each other. Don't modify CREDITS-FILE if it hasn't changed. diff-patch: Avoid emitting double-slashes in textual patch. Reword git-am 3-way fallback failure message. Limit filename for format-patch core.legacyheaders: Use the description used in RelNotes-1.5.0 ...
| * prefixcmp(): fix-up leftover strncmp().Junio C Hamano2007-02-20
| | | | | | | | | | | | | | | | | | There were instances of strncmp() that were formatted improperly (e.g. whitespace around parameter before closing parenthesis) that caused the earlier mechanical conversion step to miss them. This step cleans them up. Signed-off-by: Junio C Hamano <junkio@cox.net>