diff options
Diffstat (limited to 'Documentation')
77 files changed, 3088 insertions, 2553 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv new file mode 100644 index 000000000000..38dd762def4b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv @@ -0,0 +1,14 @@ + +What: /sys/class/net/<iface>/batman-adv/mesh_iface +Date: May 2010 +Contact: Marek Lindner <lindner_marek@yahoo.de> +Description: + The /sys/class/net/<iface>/batman-adv/mesh_iface file + displays the batman mesh interface this <iface> + currently is associated with. + +What: /sys/class/net/<iface>/batman-adv/iface_status +Date: May 2010 +Contact: Marek Lindner <lindner_marek@yahoo.de> +Description: + Indicates the status of <iface> as it is seen by batman. diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh new file mode 100644 index 000000000000..748fe1701d25 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-mesh @@ -0,0 +1,69 @@ + +What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms +Date: May 2010 +Contact: Marek Lindner <lindner_marek@yahoo.de> +Description: + Indicates whether the batman protocol messages of the + mesh <mesh_iface> shall be aggregated or not. + +What: /sys/class/net/<mesh_iface>/mesh/bonding +Date: June 2010 +Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> +Description: + Indicates whether the data traffic going through the + mesh will be sent using multiple interfaces at the + same time (if available). + +What: /sys/class/net/<mesh_iface>/mesh/fragmentation +Date: October 2010 +Contact: Andreas Langer <an.langer@gmx.de> +Description: + Indicates whether the data traffic going through the + mesh will be fragmented or silently discarded if the + packet size exceeds the outgoing interface MTU. + +What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth +Date: October 2010 +Contact: Marek Lindner <lindner_marek@yahoo.de> +Description: + Defines the bandwidth which is propagated by this + node if gw_mode was set to 'server'. + +What: /sys/class/net/<mesh_iface>/mesh/gw_mode +Date: October 2010 +Contact: Marek Lindner <lindner_marek@yahoo.de> +Description: + Defines the state of the gateway features. Can be + either 'off', 'client' or 'server'. + +What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class +Date: October 2010 +Contact: Marek Lindner <lindner_marek@yahoo.de> +Description: + Defines the selection criteria this node will use + to choose a gateway if gw_mode was set to 'client'. + +What: /sys/class/net/<mesh_iface>/mesh/orig_interval +Date: May 2010 +Contact: Marek Lindner <lindner_marek@yahoo.de> +Description: + Defines the interval in milliseconds in which batman + sends its protocol messages. + +What: /sys/class/net/<mesh_iface>/mesh/hop_penalty +Date: Oct 2010 +Contact: Linus Lüssing <linus.luessing@web.de> +Description: + Defines the penalty which will be applied to an + originator message's tq-field on every hop. + +What: /sys/class/net/<mesh_iface>/mesh/vis_mode +Date: May 2010 +Contact: Marek Lindner <lindner_marek@yahoo.de> +Description: + Each batman node only maintains information about its + own local neighborhood, therefore generating graphs + showing the topology of the entire mesh is not easily + feasible without having a central instance to collect + the local topologies from all nodes. This file allows + to activate the collecting (server) mode. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone index 063bda7fe707..698b8081c473 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone @@ -1,4 +1,4 @@ -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_dpi Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: It is possible to switch the dpi setting of the mouse with the @@ -17,13 +17,13 @@ Description: It is possible to switch the dpi setting of the mouse with the This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/actual_profile Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the number of the actual profile. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/firmware_version Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the raw integer version number of the @@ -33,7 +33,7 @@ Description: When read, this file returns the raw integer version number of the left. E.g. a returned value of 138 means 1.38 This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5] +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/profile[1-5] Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -48,7 +48,7 @@ Description: The mouse can store 5 profiles which can be switched by the stored in the profile doesn't need to fit the number of the store. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/settings Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the settings stored in the mouse. @@ -58,7 +58,7 @@ Description: When read, this file returns the settings stored in the mouse. The data has to be 36 bytes long. The mouse will reject invalid data. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/startup_profile Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The integer value of this attribute ranges from 1 to 5. @@ -67,7 +67,7 @@ Description: The integer value of this attribute ranges from 1 to 5. When written, this file sets the number of the startup profile and the mouse activates this profile immediately. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/tcu Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse has a "Tracking Control Unit" which lets the user @@ -78,7 +78,7 @@ Description: The mouse has a "Tracking Control Unit" which lets the user Writing 1 in this file will start the calibration which takes around 6 seconds to complete and activates the TCU. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kone/roccatkone<minor>/weight Date: March 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can be equipped with one of four supplied weights diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus new file mode 100644 index 000000000000..0f9f30eb1742 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus @@ -0,0 +1,108 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the number of the actual profile in + range 0-4. + This file is readonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the raw integer version number of the + firmware reported by the mouse. Using the integer value eases + further usage in other programs. To receive the real version + number the decimal point has to be shifted 2 positions to the + left. E.g. a returned value of 121 means 1.21 + This file is readonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store a macro with max 500 key/button strokes + internally. + When written, this file lets one set the sequence for a specific + button for a specific profile. Button and profile numbers are + included in written data. The data has to be 2082 bytes long. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds informations about button layout. + When written, this file lets one write the respective profile + buttons back to the mouse. The data has to be 77 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds informations about button layout. + When read, these files return the respective profile buttons. + The returned data is 77 bytes in size. + This file is readonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds informations like resolution, sensitivity + and light effects. + When written, this file lets one write the respective profile + settings back to the mouse. The data has to be 43 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds informations like resolution, sensitivity + and light effects. + When read, these files return the respective profile settings. + The returned data is 43 bytes in size. + This file is readonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse has a tracking- and a distance-control-unit. These + can be activated/deactivated and the lift-off distance can be + set. The data has to be 6 bytes long. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the profile + that's active when the mouse is powered on. + When written, this file sets the number of the startup profile + and the mouse activates this profile immediately. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written a calibration process for the tracking control unit + can be initiated/cancelled. + The data has to be 3 bytes long. + This file is writeonly. + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read the mouse returns a 30x30 pixel image of the + sampled underground. This works only in the course of a + calibration process initiated with tcu. + The returned data is 1028 bytes in size. + This file is readonly. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra index ad1125b02ff4..1c37b823f142 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra @@ -1,4 +1,4 @@ -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_cpi +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: It is possible to switch the cpi setting of the mouse with the @@ -14,14 +14,14 @@ Description: It is possible to switch the cpi setting of the mouse with the This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the number of the actual profile in range 0-4. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the raw integer version number of the @@ -31,7 +31,7 @@ Description: When read, this file returns the raw integer version number of the left. E.g. a returned value of 138 means 1.38 This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile_settings +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -45,7 +45,7 @@ Description: The mouse can store 5 profiles which can be switched by the contained in the data. This file is writeonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]_settings +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -56,7 +56,7 @@ Description: The mouse can store 5 profiles which can be switched by the The returned data is 13 bytes in size. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile_buttons +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -69,7 +69,7 @@ Description: The mouse can store 5 profiles which can be switched by the contained in the data. This file is writeonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]_buttons +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The mouse can store 5 profiles which can be switched by the @@ -79,7 +79,7 @@ Description: The mouse can store 5 profiles which can be switched by the The returned data is 19 bytes in size. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: The integer value of this attribute ranges from 0-4. @@ -87,7 +87,7 @@ Description: The integer value of this attribute ranges from 0-4. that's active when the mouse is powered on. This file is readonly. -What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings Date: August 2010 Contact: Stefan Achatz <erazor_de@users.sourceforge.net> Description: When read, this file returns the settings stored in the mouse. diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop new file mode 100644 index 000000000000..807fca2ae2a4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -0,0 +1,6 @@ +What: /sys/devices/platform/ideapad/camera_power +Date: Dec 2010 +KernelVersion: 2.6.37 +Contact: "Ike Panhc <ike.pan@canonical.com>" +Description: + Control the power of camera module. 1 means on, 0 means off. diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty new file mode 100644 index 000000000000..b138b663bf54 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-tty @@ -0,0 +1,19 @@ +What: /sys/class/tty/console/active +Date: Nov 2010 +Contact: Kay Sievers <kay.sievers@vrfy.org> +Description: + Shows the list of currently configured + console devices, like 'tty1 ttyS0'. + The last entry in the file is the active + device connected to /dev/console. + The file supports poll() to detect virtual + console switches. + +What: /sys/class/tty/tty0/active +Date: Nov 2010 +Contact: Kay Sievers <kay.sievers@vrfy.org> +Description: + Shows the currently active virtual console + device, like 'tty1'. + The file supports poll() to detect virtual + console switches. diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index 19a1210c2530..03641a08e275 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -146,6 +146,7 @@ !Finclude/net/cfg80211.h cfg80211_rx_mgmt !Finclude/net/cfg80211.h cfg80211_mgmt_tx_status !Finclude/net/cfg80211.h cfg80211_cqm_rssi_notify +!Finclude/net/cfg80211.h cfg80211_cqm_pktloss_notify !Finclude/net/cfg80211.h cfg80211_michael_mic_failure </chapter> <chapter> @@ -332,10 +333,16 @@ <title>functions/definitions</title> !Finclude/net/mac80211.h ieee80211_rx_status !Finclude/net/mac80211.h mac80211_rx_flags +!Finclude/net/mac80211.h mac80211_tx_control_flags +!Finclude/net/mac80211.h mac80211_rate_control_flags +!Finclude/net/mac80211.h ieee80211_tx_rate !Finclude/net/mac80211.h ieee80211_tx_info +!Finclude/net/mac80211.h ieee80211_tx_info_clear_status !Finclude/net/mac80211.h ieee80211_rx +!Finclude/net/mac80211.h ieee80211_rx_ni !Finclude/net/mac80211.h ieee80211_rx_irqsafe !Finclude/net/mac80211.h ieee80211_tx_status +!Finclude/net/mac80211.h ieee80211_tx_status_ni !Finclude/net/mac80211.h ieee80211_tx_status_irqsafe !Finclude/net/mac80211.h ieee80211_rts_get !Finclude/net/mac80211.h ieee80211_rts_duration @@ -346,6 +353,7 @@ !Finclude/net/mac80211.h ieee80211_stop_queue !Finclude/net/mac80211.h ieee80211_wake_queues !Finclude/net/mac80211.h ieee80211_stop_queues +!Finclude/net/mac80211.h ieee80211_queue_stopped </sect1> </chapter> @@ -354,6 +362,13 @@ !Pinclude/net/mac80211.h Frame filtering !Finclude/net/mac80211.h ieee80211_filter_flags </chapter> + + <chapter id="workqueue"> + <title>The mac80211 workqueue</title> +!Pinclude/net/mac80211.h mac80211 workqueue +!Finclude/net/mac80211.h ieee80211_queue_work +!Finclude/net/mac80211.h ieee80211_queue_delayed_work + </chapter> </part> <part id="advanced"> @@ -374,6 +389,9 @@ !Finclude/net/mac80211.h set_key_cmd !Finclude/net/mac80211.h ieee80211_key_conf !Finclude/net/mac80211.h ieee80211_key_flags +!Finclude/net/mac80211.h ieee80211_tkip_key_type +!Finclude/net/mac80211.h ieee80211_get_tkip_key +!Finclude/net/mac80211.h ieee80211_key_removed </chapter> <chapter id="powersave"> @@ -417,6 +435,18 @@ supported by mac80211, add notes about supporting hw crypto with it. </para> +!Finclude/net/mac80211.h ieee80211_iterate_active_interfaces +!Finclude/net/mac80211.h ieee80211_iterate_active_interfaces_atomic + </chapter> + + <chapter id="station-handling"> + <title>Station handling</title> + <para>TODO</para> +!Finclude/net/mac80211.h ieee80211_sta +!Finclude/net/mac80211.h sta_notify_cmd +!Finclude/net/mac80211.h ieee80211_find_sta +!Finclude/net/mac80211.h ieee80211_find_sta_by_ifaddr +!Finclude/net/mac80211.h ieee80211_sta_block_awake </chapter> <chapter id="hardware-scan-offload"> @@ -424,6 +454,28 @@ <para>TBD</para> !Finclude/net/mac80211.h ieee80211_scan_completed </chapter> + + <chapter id="aggregation"> + <title>Aggregation</title> + <sect1> + <title>TX A-MPDU aggregation</title> +!Pnet/mac80211/agg-tx.c TX A-MPDU aggregation +!Cnet/mac80211/agg-tx.c + </sect1> + <sect1> + <title>RX A-MPDU aggregation</title> +!Pnet/mac80211/agg-rx.c RX A-MPDU aggregation +!Cnet/mac80211/agg-rx.c + </sect1> +!Finclude/net/mac80211.h ieee80211_ampdu_mlme_action + </chapter> + + <chapter id="smps"> + <title>Spatial Multiplexing Powersave (SMPS)</title> +!Pinclude/net/mac80211.h Spatial multiplexing power save +!Finclude/net/mac80211.h ieee80211_request_smps +!Finclude/net/mac80211.h ieee80211_smps_mode + </chapter> </part> <part id="rate-control"> @@ -435,9 +487,16 @@ interface and how it relates to mac80211 and drivers. </para> </partintro> - <chapter id="dummy"> - <title>dummy chapter</title> + <chapter id="ratecontrol-api"> + <title>Rate Control API</title> <para>TBD</para> +!Finclude/net/mac80211.h ieee80211_start_tx_ba_session +!Finclude/net/mac80211.h ieee80211_start_tx_ba_cb_irqsafe +!Finclude/net/mac80211.h ieee80211_stop_tx_ba_session +!Finclude/net/mac80211.h ieee80211_stop_tx_ba_cb_irqsafe +!Finclude/net/mac80211.h rate_control_changed +!Finclude/net/mac80211.h ieee80211_tx_rate_control +!Finclude/net/mac80211.h rate_control_send_low </chapter> </part> @@ -485,6 +544,13 @@ </sect1> </chapter> + <chapter id="aggregation-internals"> + <title>Aggregation</title> +!Fnet/mac80211/sta_info.h sta_ampdu_mlme +!Fnet/mac80211/sta_info.h tid_ampdu_tx +!Fnet/mac80211/sta_info.h tid_ampdu_rx + </chapter> + <chapter id="synchronisation"> <title>Synchronisation</title> <para>TBD</para> diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 22edcbb9ddaf..35447e081736 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -304,6 +304,10 @@ X!Idrivers/video/console/fonts.c !Edrivers/input/ff-core.c !Edrivers/input/ff-memless.c </sect1> + <sect1><title>Multitouch Library</title> +!Iinclude/linux/input/mt.h +!Edrivers/input/input-mt.c + </sect1> <sect1><title>Polled input devices</title> !Iinclude/linux/input-polldev.h !Edrivers/input/input-polldev.c diff --git a/Documentation/DocBook/v4l/func-ioctl.xml b/Documentation/DocBook/v4l/func-ioctl.xml index 00f9690e1c28..b60fd37a6295 100644 --- a/Documentation/DocBook/v4l/func-ioctl.xml +++ b/Documentation/DocBook/v4l/func-ioctl.xml @@ -34,8 +34,7 @@ <varlistentry> <term><parameter>request</parameter></term> <listitem> - <para>V4L2 ioctl request code as defined in the <link -linkend="videodev">videodev.h</link> header file, for example + <para>V4L2 ioctl request code as defined in the <filename>videodev2.h</filename> header file, for example VIDIOC_QUERYCAP.</para> </listitem> </varlistentry> @@ -57,7 +56,7 @@ file descriptor. An ioctl <parameter>request</parameter> has encoded in it whether the argument is an input, output or read/write parameter, and the size of the argument <parameter>argp</parameter> in bytes. Macros and defines specifying V4L2 ioctl requests are located -in the <link linkend="videodev">videodev.h</link> header file. +in the <filename>videodev2.h</filename> header file. Applications should use their own copy, not include the version in the kernel sources on the system they compile on. All V4L2 ioctl requests, their respective function and parameters are specified in <xref diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index d7c467187095..cfffc88d7383 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -142,8 +142,8 @@ leftmost pixel of the second row from the top, and so on. The last row has just as many pad bytes after it as the other rows.</para> <para>In V4L2 each format has an identifier which looks like -<constant>PIX_FMT_XXX</constant>, defined in the <link -linkend="videodev">videodev.h</link> header file. These identifiers +<constant>PIX_FMT_XXX</constant>, defined in the <filename>videodev2.h</filename> +header file. These identifiers represent <link linkend="v4l2-fourcc">four character codes</link> which are also listed below, however they are not the same as those used in the Windows world.</para> diff --git a/Documentation/Makefile b/Documentation/Makefile index 6fc7ea1d1f9d..9b4bc5c76f33 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -1,3 +1,3 @@ obj-m := DocBook/ accounting/ auxdisplay/ connector/ \ filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \ - pcmcia/ spi/ timers/ video4linux/ vm/ watchdog/src/ + pcmcia/ spi/ timers/ vm/ watchdog/src/ diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index a851118775d8..6a8c73f55b80 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -1,18 +1,22 @@ CONFIG_RCU_TRACE debugfs Files and Formats -The rcutree implementation of RCU provides debugfs trace output that -summarizes counters and state. This information is useful for debugging -RCU itself, and can sometimes also help to debug abuses of RCU. -The following sections describe the debugfs files and formats. +The rcutree and rcutiny implementations of RCU provide debugfs trace +output that summarizes counters and state. This information is useful for +debugging RCU itself, and can sometimes also help to debug abuses of RCU. +The following sections describe the debugfs files and formats, first +for rcutree and next for rcutiny. -Hierarchical RCU debugfs Files and Formats +CONFIG_TREE_RCU and CONFIG_TREE_PREEMPT_RCU debugfs Files and Formats -This implementation of RCU provides three debugfs files under the +These implementations of RCU provides five debugfs files under the top-level directory RCU: rcu/rcudata (which displays fields in struct -rcu_data), rcu/rcugp (which displays grace-period counters), and -rcu/rcuhier (which displays the struct rcu_node hierarchy). +rcu_data), rcu/rcudata.csv (which is a .csv spreadsheet version of +rcu/rcudata), rcu/rcugp (which displays grace-period counters), +rcu/rcuhier (which displays the struct rcu_node hierarchy), and +rcu/rcu_pending (which displays counts of the reasons that the +rcu_pending() function decided that there was core RCU work to do). The output of "cat rcu/rcudata" looks as follows: @@ -130,7 +134,8 @@ o "ci" is the number of RCU callbacks that have been invoked for been registered in absence of CPU-hotplug activity. o "co" is the number of RCU callbacks that have been orphaned due to - this CPU going offline. + this CPU going offline. These orphaned callbacks have been moved + to an arbitrarily chosen online CPU. o "ca" is the number of RCU callbacks that have been adopted due to other CPUs going offline. Note that ci+co-ca+ql is the number of @@ -168,12 +173,12 @@ o "gpnum" is the number of grace periods that have started. It is The output of "cat rcu/rcuhier" looks as follows, with very long lines: -c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 oqlen=0 +c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 1/1 .>. 0:127 ^0 3/3 .>. 0:35 ^0 0/0 .>. 36:71 ^1 0/0 .>. 72:107 ^2 0/0 .>. 108:127 ^3 3/3f .>. 0:5 ^0 2/3 .>. 6:11 ^1 0/0 .>. 12:17 ^2 0/0 .>. 18:23 ^3 0/0 .>. 24:29 ^4 0/0 .>. 30:35 ^5 0/0 .>. 36:41 ^0 0/0 .>. 42:47 ^1 0/0 .>. 48:53 ^2 0/0 .>. 54:59 ^3 0/0 .>. 60:65 ^4 0/0 .>. 66:71 ^5 0/0 .>. 72:77 ^0 0/0 .>. 78:83 ^1 0/0 .>. 84:89 ^2 0/0 .>. 90:95 ^3 0/0 .>. 96:101 ^4 0/0 .>. 102:107 ^5 0/0 .>. 108:113 ^0 0/0 .>. 114:119 ^1 0/0 .>. 120:125 ^2 0/0 .>. 126:127 ^3 rcu_bh: -c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 oqlen=0 +c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 0/1 .>. 0:127 ^0 0/3 .>. 0:35 ^0 0/0 .>. 36:71 ^1 0/0 .>. 72:107 ^2 0/0 .>. 108:127 ^3 0/3f .>. 0:5 ^0 0/3 .>. 6:11 ^1 0/0 .>. 12:17 ^2 0/0 .>. 18:23 ^3 0/0 .>. 24:29 ^4 0/0 .>. 30:35 ^5 0/0 .>. 36:41 ^0 0/0 .>. 42:47 ^1 0/0 .>. 48:53 ^2 0/0 .>. 54:59 ^3 0/0 .>. 60:65 ^4 0/0 .>. 66:71 ^5 0/0 .>. 72:77 ^0 0/0 .>. 78:83 ^1 0/0 .>. 84:89 ^2 0/0 .>. 90:95 ^3 0/0 .>. 96:101 ^4 0/0 .>. 102:107 ^5 0/0 .>. 108:113 ^0 0/0 .>. 114:119 ^1 0/0 .>. 120:125 ^2 0/0 .>. 126:127 ^3 @@ -212,11 +217,6 @@ o "fqlh" is the number of calls to force_quiescent_state() that exited immediately (without even being counted in nfqs above) due to contention on ->fqslock. -o "oqlen" is the number of callbacks on the "orphan" callback - list. RCU callbacks are placed on this list by CPUs going - offline, and are "adopted" either by the CPU helping the outgoing - CPU or by the next rcu_barrier*() call, whichever comes first. - o Each element of the form "1/1 0:127 ^0" represents one struct rcu_node. Each line represents one level of the hierarchy, from root to leaves. It is best to think of the rcu_data structures @@ -326,3 +326,115 @@ o "nn" is the number of times that this CPU needed nothing. Alert readers will note that the rcu "nn" number for a given CPU very closely matches the rcu_bh "np" number for that same CPU. This is due to short-circuit evaluation in rcu_pending(). + + +CONFIG_TINY_RCU and CONFIG_TINY_PREEMPT_RCU debugfs Files and Formats + +These implementations of RCU provides a single debugfs file under the +top-level directory RCU, namely rcu/rcudata, which displays fields in +rcu_bh_ctrlblk, rcu_sched_ctrlblk and, for CONFIG_TINY_PREEMPT_RCU, +rcu_preempt_ctrlblk. + +The output of "cat rcu/rcudata" is as follows: + +rcu_preempt: qlen=24 gp=1097669 g197/p197/c197 tasks=... + ttb=. btg=no ntb=184 neb=0 nnb=183 j=01f7 bt=0274 + normal balk: nt=1097669 gt=0 bt=371 b=0 ny=25073378 nos=0 + exp balk: bt=0 nos=0 +rcu_sched: qlen: 0 +rcu_bh: qlen: 0 + +This is split into rcu_preempt, rcu_sched, and rcu_bh sections, with the +rcu_preempt section appearing only in CONFIG_TINY_PREEMPT_RCU builds. +The last three lines of the rcu_preempt section appear only in +CONFIG_RCU_BOOST kernel builds. The fields are as follows: + +o "qlen" is the number of RCU callbacks currently waiting either + for an RCU grace period or waiting to be invoked. This is the + only field present for rcu_sched and rcu_bh, due to the + short-circuiting of grace period in those two cases. + +o "gp" is the number of grace periods that have completed. + +o "g197/p197/c197" displays the grace-period state, with the + "g" number being the number of grace periods that have started + (mod 256), the "p" number being the number of grace periods + that the CPU has responded to (also mod 256), and the "c" + number being the number of grace periods that have completed + (once again mode 256). + + Why have both "gp" and "g"? Because the data flowing into + "gp" is only present in a CONFIG_RCU_TRACE kernel. + +o "tasks" is a set of bits. The first bit is "T" if there are + currently tasks that have recently blocked within an RCU + read-side critical section, the second bit is "N" if any of the + aforementioned tasks are blocking the current RCU grace period, + and the third bit is "E" if any of the aforementioned tasks are + blocking the current expedited grace period. Each bit is "." + if the corresponding condition does not hold. + +o "ttb" is a single bit. It is "B" if any of the blocked tasks + need to be priority boosted and "." otherwise. + +o "btg" indicates whether boosting has been carried out during + the current grace period, with "exp" indicating that boosting + is in progress for an expedited grace period, "no" indicating + that boosting has not yet started for a normal grace period, + "begun" indicating that boosting has bebug for a normal grace + period, and "done" indicating that boosting has completed for + a normal grace period. + +o "ntb" is the total number of tasks subjected to RCU priority boosting + periods since boot. + +o "neb" is the number of expedited grace periods that have had + to resort to RCU priority boosting since boot. + +o "nnb" is the number of normal grace periods that have had + to resort to RCU priority boosting since boot. + +o "j" is the low-order 12 bits of the jiffies counter in hexadecimal. + +o "bt" is the low-order 12 bits of the value that the jiffies counter + will have at the next time that boosting is scheduled to begin. + +o In the line beginning with "normal balk", the fields are as follows: + + o "nt" is the number of times that the system balked from + boosting because there were no blocked tasks to boost. + Note that the system will balk from boosting even if the + grace period is overdue when the currently running task + is looping within an RCU read-side critical section. + There is no point in boosting in this case, because + boosting a running task won't make it run any faster. + + o "gt" is the number of times that the system balked + from boosting because, although there were blocked tasks, + none of them were preventing the current grace period + from completing. + + o "bt" is the number of times that the system balked + from boosting because boosting was already in progress. + + o "b" is the number of times that the system balked from + boosting because boosting had already completed for + the grace period in question. + + o "ny" is the number of times that the system balked from + boosting because it was not yet time to start boosting + the grace period in question. + + o "nos" is the number of times that the system balked from + boosting for inexplicable ("not otherwise specified") + reasons. This can actually happen due to races involving + increments of the jiffies counter. + +o In the line beginning with "exp balk", the fields are as follows: + + o "bt" is the number of times that the system balked from + boosting because there were no blocked tasks to boost. + + o "nos" is the number of times that the system balked from + boosting for inexplicable ("not otherwise specified") + reasons. diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX index ecf7d04bca26..91c24a1e8a9e 100644 --- a/Documentation/arm/00-INDEX +++ b/Documentation/arm/00-INDEX @@ -34,3 +34,5 @@ memory.txt - description of the virtual memory layout nwfpe/ - NWFPE floating point emulator documentation +swp_emulation + - SWP/SWPB emulation handler/logging description diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm index 5389440aade3..9012bb039094 100644 --- a/Documentation/arm/OMAP/omap_pm +++ b/Documentation/arm/OMAP/omap_pm @@ -127,3 +127,28 @@ implementation needs: 10. (*pdata->cpu_set_freq)(unsigned long f) 11. (*pdata->cpu_get_freq)(void) + +Customizing OPP for platform +============================ +Defining CONFIG_PM should enable OPP layer for the silicon +and the registration of OPP table should take place automatically. +However, in special cases, the default OPP table may need to be +tweaked, for e.g.: + * enable default OPPs which are disabled by default, but which + could be enabled on a platform + * Disable an unsupported OPP on the platform + * Define and add a custom opp table entry +in these cases, the board file needs to do additional steps as follows: +arch/arm/mach-omapx/board-xyz.c + #include "pm.h" + .... + static void __init omap_xyz_init_irq(void) + { + .... + /* Initialize the default table */ + omapx_opp_init(); + /* Do customization to the defaults */ + .... + } +NOTE: omapx_opp_init will be omap3_opp_init or as required +based on the omap family. diff --git a/Documentation/arm/swp_emulation b/Documentation/arm/swp_emulation new file mode 100644 index 000000000000..af903d22fd93 --- /dev/null +++ b/Documentation/arm/swp_emulation @@ -0,0 +1,27 @@ +Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE) +--------------------------------------------------------------------- + +ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds +moving to the load-locked/store-conditional instructions LDREX and STREX. + +ARMv7 multiprocessing extensions introduce the ability to disable these +instructions, triggering an undefined instruction exception when executed. +Trapped instructions are emulated using an LDREX/STREX or LDREXB/STREXB +sequence. If a memory access fault (an abort) occurs, a segmentation fault is +signalled to the triggering process. + +/proc/cpu/swp_emulation holds some statistics/information, including the PID of +the last process to trigger the emulation to be invocated. For example: +--- +Emulated SWP: 12 +Emulated SWPB: 0 +Aborted SWP{B}: 1 +Last process: 314 +--- + +NOTE: when accessing uncached shared regions, LDREX/STREX rely on an external +transaction monitoring block called a global monitor to maintain update +atomicity. If your system does not implement a global monitor, this option can +cause programs that perform SWP operations to uncached memory to deadlock, as +the STREX operation will always fail. + diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt index 4a276ea7001c..96b690348ba1 100644 --- a/Documentation/coccinelle.txt +++ b/Documentation/coccinelle.txt @@ -36,6 +36,10 @@ as a regular user, and install it with sudo make install +The semantic patches in the kernel will work best with Coccinelle version +0.2.4 or later. Using earlier versions may incur some parse errors in the +semantic patch code, but any results that are obtained should still be +correct. Using Coccinelle on the Linux kernel ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/dontdiff b/Documentation/dontdiff index d9bcffd59433..470d3dba1a69 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -62,6 +62,10 @@ aic7*reg_print.c* aic7*seq.h* aicasm aicdb.h* +altivec1.c +altivec2.c +altivec4.c +altivec8.c asm-offsets.h asm_offsets.h autoconf.h* @@ -76,6 +80,7 @@ btfixupprep build bvmlinux bzImage* +capflags.c classlist.h* comp*.log compile.h* @@ -94,6 +99,7 @@ devlist.h* docproc elf2ecoff elfconfig.h* +evergreen_reg_safe.h fixdep flask.h fore200e_mkfirm @@ -108,9 +114,16 @@ genksyms *_gray256.c ihex2fw ikconfig.h* +inat-tables.c initramfs_data.cpio initramfs_data.cpio.gz initramfs_list +int16.c +int1.c +int2.c +int32.c +int4.c +int8.c kallsyms kconfig keywords.c @@ -140,6 +153,7 @@ mkprep mktables mktree modpost +modules.builtin modules.order modversions.h* ncscope.* @@ -153,14 +167,23 @@ pca200e.bin pca200e_ecd.bin2 piggy.gz piggyback +piggy.S pnmtologo ppc_defs.h* pss_boot.h qconf +r100_reg_safe.h +r200_reg_safe.h +r300_reg_safe.h +r420_reg_safe.h +r600_reg_safe.h raid6altivec*.c raid6int*.c raid6tables.c relocs +rn50_reg_safe.h +rs600_reg_safe.h +rv515_reg_safe.h series setup setup.bin @@ -169,6 +192,7 @@ sImage sm_tbl* split-include syscalltab.h +tables.c tags tftpboot.img timeconst.h @@ -190,6 +214,7 @@ vmlinux vmlinux-* vmlinux.aout vmlinux.lds +voffset.h vsyscall.lds vsyscall_32.lds wanxlfw.inc @@ -200,3 +225,4 @@ wakeup.elf wakeup.lds zImage* zconf.hash.c +zoffset.h diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt index e175784b89bf..641886504201 100644 --- a/Documentation/dvb/lmedm04.txt +++ b/Documentation/dvb/lmedm04.txt @@ -46,7 +46,7 @@ and run Other LG firmware can be extracted manually from US280D.sys only found in windows/system32/driver. -dd if=US280D.sys ibs=1 skip=42616 count=3668 of=dvb-usb-lme2510-lg.fw +dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw for DM04 LME2510C (LG Tuner) --------------------------- diff --git a/Documentation/fb/udlfb.txt b/Documentation/fb/udlfb.txt new file mode 100644 index 000000000000..7fdde2a02a27 --- /dev/null +++ b/Documentation/fb/udlfb.txt @@ -0,0 +1,144 @@ + +What is udlfb? +=============== + +This is a driver for DisplayLink USB 2.0 era graphics chips. + +DisplayLink chips provide simple hline/blit operations with some compression, +pairing that with a hardware framebuffer (16MB) on the other end of the +USB wire. That hardware framebuffer is able to drive the VGA, DVI, or HDMI +monitor with no CPU involvement until a pixel has to change. + +The CPU or other local resource does all the rendering; optinally compares the +result with a local shadow of the remote hardware framebuffer to identify +the minimal set of pixels that have changed; and compresses and sends those +pixels line-by-line via USB bulk transfers. + +Because of the efficiency of bulk transfers and a protocol on top that +does not require any acks - the effect is very low latency that +can support surprisingly high resolutions with good performance for +non-gaming and non-video applications. + +Mode setting, EDID read, etc are other bulk or control transfers. Mode +setting is very flexible - able to set nearly arbitrary modes from any timing. + +Advantages of USB graphics in general: + + * Ability to add a nearly arbitrary number of displays to any USB 2.0 + capable system. On Linux, number of displays is limited by fbdev interface + (FB_MAX is currently 32). Of course, all USB devices on the same + host controller share the same 480Mbs USB 2.0 interface. + +Advantages of supporting DisplayLink chips with kernel framebuffer interface: + + * The actual hardware functionality of DisplayLink chips matches nearly + one-to-one with the fbdev interface, making the driver quite small and + tight relative to the functionality it provides. + * X servers and other applications can use the standard fbdev interface + from user mode to talk to the device, without needing to know anything + about USB or DisplayLink's protocol at all. A "displaylink" X driver + and a slightly modified "fbdev" X driver are among those that already do. + +Disadvantages: + + * Fbdev's mmap interface assumes a real hardware framebuffer is mapped. + In the case of USB graphics, it is just an allocated (virtual) buffer. + Writes need to be detected and encoded into USB bulk transfers by the CPU. + Accurate damage/changed area notifications work around this problem. + In the future, hopefully fbdev will be enhanced with an small standard + interface to allow mmap clients to report damage, for the benefit + of virtual or remote framebuffers. + * Fbdev does not arbitrate client ownership of the framebuffer well. + * Fbcon assumes the first framebuffer it finds should be consumed for console. + * It's not clear what the future of fbdev is, given the rise of KMS/DRM. + +How to use it? +============== + +Udlfb, when loaded as a module, will match against all USB 2.0 generation +DisplayLink chips (Alex and Ollie family). It will then attempt to read the EDID +of the monitor, and set the best common mode between the DisplayLink device +and the monitor's capabilities. + +If the DisplayLink device is successful, it will paint a "green screen" which +means that from a hardware and fbdev software perspective, everything is good. + +At that point, a /dev/fb? interface will be present for user-mode applications +to open and begin writing to the framebuffer of the DisplayLink device using +standard fbdev calls. Note that if mmap() is used, by default the user mode +application must send down damage notifcations to trigger repaints of the +changed regions. Alternatively, udlfb can be recompiled with experimental +defio support enabled, to support a page-fault based detection mechanism +that can work without explicit notifcation. + +The most common client of udlfb is xf86-video-displaylink or a modified +xf86-video-fbdev X server. These servers have no real DisplayLink specific +code. They write to the standard framebuffer interface and rely on udlfb +to do its thing. The one extra feature they have is the ability to report +rectangles from the X DAMAGE protocol extension down to udlfb via udlfb's +damage interface (which will hopefully be standardized for all virtual +framebuffers that need damage info). These damage notifications allow +udlfb to efficiently process the changed pixels. + +Module Options +============== + +Special configuration for udlfb is usually unnecessary. There are a few +options, however. + +From the command line, pass options to modprobe +modprobe udlfb defio=1 console=1 + +Or for permanent option, create file like /etc/modprobe.d/options with text +options udlfb defio=1 console=1 + +Accepted options: + +fb_defio Make use of the fb_defio (CONFIG_FB_DEFERRED_IO) kernel + module to track changed areas of the framebuffer by page faults. + Standard fbdev applications that use mmap but that do not + report damage, may be able to work with this enabled. + Disabled by default because of overhead and other issues. + +console Allow fbcon to attach to udlfb provided framebuffers. This + is disabled by default because fbcon will aggressively consume + the first framebuffer it finds, which isn't usually what the + user wants in the case of USB displays. + +Sysfs Attributes +================ + +Udlfb creates several files in /sys/class/graphics/fb? +Where ? is the sequential framebuffer id of the particular DisplayLink device + +edid If a valid EDID blob is written to this file (typically + by a udev rule), then udlfb will use this EDID as a + backup in case reading the actual EDID of the monitor + attached to the DisplayLink device fails. This is + especially useful for fixed panels, etc. that cannot + communicate their capabilities via EDID. Reading + this file returns the current EDID of the attached + monitor (or last backup value written). This is + useful to get the EDID of the attached monitor, + which can be passed to utilities like parse-edid. + +metrics_bytes_rendered 32-bit count of pixel bytes rendered + +metrics_bytes_identical 32-bit count of how many of those bytes were found to be + unchanged, based on a shadow framebuffer check + +metrics_bytes_sent 32-bit count of how many bytes were transferred over + USB to communicate the resulting changed pixels to the + hardware. Includes compression and protocol overhead + +metrics_cpu_kcycles_used 32-bit count of CPU cycles used in processing the + above pixels (in thousands of cycles). + +metrics_reset Write-only. Any write to this file resets all metrics + above to zero. Note that the 32-bit counters above + roll over very quickly. To get reliable results, design + performance tests to start and finish in a very short + period of time (one minute or less is safe). + +-- +Bernie Thompson <bernie@plugable.com> diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 6c2f55e05f13..22f10818c2b3 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -97,36 +97,38 @@ Who: Pavel Machek <pavel@ucw.cz> --------------------------- -What: Video4Linux API 1 ioctls and from Video devices. -When: kernel 2.6.38 -Files: include/linux/videodev.h -Check: include/linux/videodev.h -Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6 - series. The old API have lots of drawbacks and don't provide enough - means to work with all video and audio standards. The newer API is - already available on the main drivers and should be used instead. - Newer drivers should use v4l_compat_translate_ioctl function to handle - old calls, replacing to newer ones. - Decoder iocts are using internally to allow video drivers to - communicate with video decoders. This should also be improved to allow - V4L2 calls being translated into compatible internal ioctls. - Compatibility ioctls will be provided, for a while, via - v4l1-compat module. -Who: Mauro Carvalho Chehab <mchehab@infradead.org> - ---------------------------- - What: Video4Linux obsolete drivers using V4L1 API -When: kernel 2.6.38 -Files: drivers/staging/cpia/* drivers/staging/stradis/* -Check: drivers/staging/cpia/cpia.c drivers/staging/stradis/stradis.c +When: kernel 2.6.39 +Files: drivers/staging/se401/* drivers/staging/usbvideo/* +Check: drivers/staging/se401/se401.c drivers/staging/usbvideo/usbvideo.c Why: There are some drivers still using V4L1 API, despite all efforts we've done to migrate. Those drivers are for obsolete hardware that the old maintainer didn't care (or not have the hardware anymore), and that no other developer could find any hardware to buy. They probably have no practical usage today, and people with such old hardware could probably keep using an older version - of the kernel. Those drivers will be moved to staging on 2.6.37 and, if nobody - care enough to port and test them with V4L2 API, they'll be removed on 2.6.38. + of the kernel. Those drivers will be moved to staging on 2.6.38 and, if nobody + cares enough to port and test them with V4L2 API, they'll be removed on 2.6.39. +Who: Mauro Carvalho Chehab <mchehab@infradead.org> + +--------------------------- + +What: Video4Linux: Remove obsolete ioctl's +When: kernel 2.6.39 +Files: include/media/videodev2.h +Why: Some ioctl's were defined wrong on 2.6.2 and 2.6.6, using the wrong + type of R/W arguments. They were fixed, but the old ioctl names are + still there, maintained to avoid breaking binary compatibility: + #define VIDIOC_OVERLAY_OLD _IOWR('V', 14, int) + #define VIDIOC_S_PARM_OLD _IOW('V', 22, struct v4l2_streamparm) + #define VIDIOC_S_CTRL_OLD _IOW('V', 28, struct v4l2_control) + #define VIDIOC_G_AUDIO_OLD _IOWR('V', 33, struct v4l2_audio) + #define VIDIOC_G_AUDOUT_OLD _IOWR('V', 49, struct v4l2_audioout) + #define VIDIOC_CROPCAP_OLD _IOR('V', 58, struct v4l2_cropcap) + There's no sense on preserving those forever, as it is very doubtful + that someone would try to use a such old binary with a modern kernel. + Removing them will allow us to remove some magic done at the V4L ioctl + handler. + Who: Mauro Carvalho Chehab <mchehab@infradead.org> --------------------------- @@ -564,3 +566,13 @@ Why: This field is deprecated. I2C device drivers shouldn't change their Who: Jean Delvare <khali@linux-fr.org> ---------------------------- + +What: cancel_rearming_delayed_work[queue]() +When: 2.6.39 + +Why: The functions have been superceded by cancel_delayed_work_sync() + quite some time ago. The conversion is trivial and there is no + in-kernel user left. +Who: Tejun Heo <tj@kernel.org> + +---------------------------- diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index b6426f15b4ae..977d8919cc69 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -9,23 +9,25 @@ be able to use diff(1). --------------------------- dentry_operations -------------------------- prototypes: - int (*d_revalidate)(struct dentry *, int); - int (*d_hash) (struct dentry *, struct qstr *); - int (*d_compare) (struct dentry *, struct qstr *, struct qstr *); + int (*d_revalidate)(struct dentry *, struct nameidata *); + int (*d_hash)(const struct dentry *, const struct inode *, + struct qstr *); + int (*d_compare)(const struct dentry *, const struct inode *, + const struct dentry *, const struct inode *, + unsigned int, const char *, const struct qstr *); int (*d_delete)(struct dentry *); void (*d_release)(struct dentry *); void (*d_iput)(struct dentry *, struct inode *); char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen); locking rules: - none have BKL - dcache_lock rename_lock ->d_lock may block -d_revalidate: no no no yes -d_hash no no no yes -d_compare: no yes no no -d_delete: yes no yes no -d_release: no no no yes -d_iput: no no no yes + rename_lock ->d_lock may block rcu-walk +d_revalidate: no no yes (ref-walk) maybe +d_hash no no no maybe +d_compare: yes no no maybe +d_delete: no yes no no +d_release: no no yes no +d_iput: no no yes no d_dname: no no no no --------------------------- inode_operations --------------------------- @@ -42,18 +44,23 @@ ata *); int (*rename) (struct inode *, struct dentry *, struct inode *, struct dentry *); int (*readlink) (struct dentry *, char __user *,int); - int (*follow_link) (struct dentry *, struct nameidata *); + void * (*follow_link) (struct dentry *, struct nameidata *); + void (*put_link) (struct dentry *, struct nameidata *, void *); void (*truncate) (struct inode *); - int (*permission) (struct inode *, int, struct nameidata *); + int (*permission) (struct inode *, int, unsigned int); + int (*check_acl)(struct inode *, int, unsigned int); int (*setattr) (struct dentry *, struct iattr *); int (*getattr) (struct vfsmount *, struct dentry *, struct kstat *); int (*setxattr) (struct dentry *, const char *,const void *,size_t,int); ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t); ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*removexattr) (struct dentry *, const char *); + void (*truncate_range)(struct inode *, loff_t, loff_t); + long (*fallocate)(struct inode *inode, int mode, loff_t offset, loff_t len); + int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); locking rules: - all may block, none have BKL + all may block i_mutex(inode) lookup: yes create: yes @@ -66,19 +73,24 @@ rmdir: yes (both) (see below) rename: yes (all) (see below) readlink: no follow_link: no +put_link: no truncate: yes (see below) setattr: yes -permission: no +permission: no (may not block if called in rcu-walk mode) +check_acl: no getattr: no setxattr: yes getxattr: no listxattr: no removexattr: yes +truncate_range: yes +fallocate: no +fiemap: no Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on victim. cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem. ->truncate() is never called directly - it's a callback, not a -method. It's called by vmtruncate() - library function normally used by +method. It's called by vmtruncate() - deprecated library function used by ->setattr(). Locking information above applies to that call (i.e. is inherited from ->setattr() - vmtruncate() is used when ATTR_SIZE had been passed). @@ -91,7 +103,7 @@ prototypes: struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); void (*dirty_inode) (struct inode *); - int (*write_inode) (struct inode *, int); + int (*write_inode) (struct inode *, struct writeback_control *wbc); int (*drop_inode) (struct inode *); void (*evict_inode) (struct inode *); void (*put_super) (struct super_block *); @@ -105,10 +117,10 @@ prototypes: int (*show_options)(struct seq_file *, struct vfsmount *); ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); + int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t); locking rules: All may block [not true, see below] - None have BKL s_umount alloc_inode: destroy_inode: @@ -127,6 +139,7 @@ umount_begin: no show_options: no (namespace_sem) quota_read: no (see below) quota_write: no (see below) +bdev_try_to_free_page: no (see below) ->statfs() has s_umount (shared) when called by ustat(2) (native or compat), but that's an accident of bad API; s_umount is used to pin @@ -139,19 +152,25 @@ be the only ones operating on the quota file by the quota code (via dqio_sem) (unless an admin really wants to screw up something and writes to quota files with quotas on). For other details about locking see also dquot_operations section. +->bdev_try_to_free_page is called from the ->releasepage handler of +the block device inode. See there for more details. --------------------------- file_system_type --------------------------- prototypes: int (*get_sb) (struct file_system_type *, int, const char *, void *, struct vfsmount *); + struct dentry *(*mount) (struct file_system_type *, int, + const char *, void *); void (*kill_sb) (struct super_block *); locking rules: - may block BKL -get_sb yes no -kill_sb yes no + may block +get_sb yes +mount yes +kill_sb yes ->get_sb() returns error or 0 with locked superblock attached to the vfsmount (exclusive on ->s_umount). +->mount() returns ERR_PTR or the root dentry. ->kill_sb() takes a write-locked superblock, does all shutdown work on it, unlocks and drops the reference. @@ -176,27 +195,35 @@ prototypes: void (*freepage)(struct page *); int (*direct_IO)(int, struct kiocb *, const struct iovec *iov, loff_t offset, unsigned long nr_segs); - int (*launder_page) (struct page *); + int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **, + unsigned long *); + int (*migratepage)(struct address_space *, struct page *, struct page *); + int (*launder_page)(struct page *); + int (*is_partially_uptodate)(struct page *, read_descriptor_t *, unsigned long); + int (*error_remove_page)(struct address_space *, struct page *); locking rules: All except set_page_dirty and freepage may block - BKL PageLocked(page) i_mutex -writepage: no yes, unlocks (see below) -readpage: no yes, unlocks -sync_page: no maybe -writepages: no -set_page_dirty no no -readpages: no -write_begin: no locks the page yes -write_end: no yes, unlocks yes -perform_write: no n/a yes -bmap: no -invalidatepage: no yes -releasepage: no yes -freepage: no yes -direct_IO: no -launder_page: no yes + PageLocked(page) i_mutex +writepage: yes, unlocks (see below) +readpage: yes, unlocks +sync_page: maybe +writepages: +set_page_dirty no +readpages: +write_begin: locks the page yes +write_end: yes, unlocks yes +bmap: +invalidatepage: yes +releasepage: yes +freepage: yes +direct_IO: +get_xip_mem: maybe +migratepage: yes (both) +launder_page: yes +is_partially_uptodate: yes +error_remove_page: yes ->write_begin(), ->write_end(), ->sync_page() and ->readpage() may be called from the request handler (/dev/loop). @@ -276,9 +303,8 @@ under spinlock (it cannot block) and is sometimes called with the page not locked. ->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some -filesystems and by the swapper. The latter will eventually go away. All -instances do not actually need the BKL. Please, keep it that way and don't -breed new callers. +filesystems and by the swapper. The latter will eventually go away. Please, +keep it that way and don't breed new callers. ->invalidatepage() is called when the filesystem must attempt to drop some or all of the buffers from the page when it is being truncated. It @@ -299,47 +325,37 @@ cleaned, or an error value if not. Note that in order to prevent the page getting mapped back in and redirtied, it needs to be kept locked across the entire operation. - Note: currently almost all instances of address_space methods are -using BKL for internal serialization and that's one of the worst sources -of contention. Normally they are calling library functions (in fs/buffer.c) -and pass foo_get_block() as a callback (on local block-based filesystems, -indeed). BKL is not needed for library stuff and is usually taken by -foo_get_block(). It's an overkill, since block bitmaps can be protected by -internal fs locking and real critical areas are much smaller than the areas -filesystems protect now. - ----------------------- file_lock_operations ------------------------------ prototypes: - void (*fl_insert)(struct file_lock *); /* lock insertion callback */ - void (*fl_remove)(struct file_lock *); /* lock removal callback */ void (*fl_copy_lock)(struct file_lock *, struct file_lock *); void (*fl_release_private)(struct file_lock *); locking rules: - BKL may block -fl_insert: yes no -fl_remove: yes no -fl_copy_lock: yes no -fl_release_private: yes yes + file_lock_lock may block +fl_copy_lock: yes no +fl_release_private: maybe no ----------------------- lock_manager_operations --------------------------- prototypes: int (*fl_compare_owner)(struct file_lock *, struct file_lock *); void (*fl_notify)(struct file_lock *); /* unblock callback */ + int (*fl_grant)(struct file_lock *, struct file_lock *, int); void (*fl_release_private)(struct file_lock *); void (*fl_break)(struct file_lock *); /* break_lease callback */ + int (*fl_mylease)(struct file_lock *, struct file_lock *); + int (*fl_change)(struct file_lock **, int); locking rules: - BKL may block -fl_compare_owner: yes no -fl_notify: yes no -fl_release_private: yes yes -fl_break: yes no - - Currently only NFSD and NLM provide instances of this class. None of the -them block. If you have out-of-tree instances - please, show up. Locking -in that area will change. + file_lock_lock may block +fl_compare_owner: yes no +fl_notify: yes no +fl_grant: no no +fl_release_private: maybe no +fl_break: yes no +fl_mylease: yes no +fl_change yes no + --------------------------- buffer_head ----------------------------------- prototypes: void (*b_end_io)(struct buffer_head *bh, int uptodate); @@ -364,17 +380,17 @@ prototypes: void (*swap_slot_free_notify) (struct block_device *, unsigned long); locking rules: - BKL bd_mutex -open: no yes -release: no yes -ioctl: no no -compat_ioctl: no no -direct_access: no no -media_changed: no no -unlock_native_capacity: no no -revalidate_disk: no no -getgeo: no no -swap_slot_free_notify: no no (see below) + bd_mutex +open: yes +release: yes +ioctl: no +compat_ioctl: no +direct_access: no +media_changed: no +unlock_native_capacity: no +revalidate_disk: no +getgeo: no +swap_slot_free_notify: no (see below) media_changed, unlock_native_capacity and revalidate_disk are called only from check_disk_change(). @@ -413,34 +429,21 @@ prototypes: unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*check_flags)(int); + int (*flock) (struct file *, int, struct file_lock *); + ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, + size_t, unsigned int); + ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, + size_t, unsigned int); + int (*setlease)(struct file *, long, struct file_lock **); }; locking rules: - All may block. - BKL -llseek: no (see below) -read: no -aio_read: no -write: no -aio_write: no -readdir: no -poll: no -unlocked_ioctl: no -compat_ioctl: no -mmap: no -open: no -flush: no -release: no -fsync: no (see below) -aio_fsync: no -fasync: no -lock: yes -readv: no -writev: no -sendfile: no -sendpage: no -get_unmapped_area: no -check_flags: no + All may block except for ->setlease. + No VFS locks held on entry except for ->fsync and ->setlease. + +->fsync() has i_mutex on inode. + +->setlease has the file_list_lock held and must not sleep. ->llseek() locking has moved from llseek to the individual llseek implementations. If your fs is not using generic_file_llseek, you @@ -450,17 +453,10 @@ mutex or just to use i_size_read() instead. Note: this does not protect the file->f_pos against concurrent modifications since this is something the userspace has to take care about. -Note: ext2_release() was *the* source of contention on fs-intensive -loads and dropping BKL on ->release() helps to get rid of that (we still -grab BKL for cases when we close a file that had been opened r/w, but that -can and should be done using the internal locking with smaller critical areas). -Current worst offender is ext2_get_block()... - -->fasync() is called without BKL protection, and is responsible for -maintaining the FASYNC bit in filp->f_flags. Most instances call -fasync_helper(), which does that maintenance, so it's not normally -something one needs to worry about. Return values > 0 will be mapped to -zero in the VFS layer. +->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags. +Most instances call fasync_helper(), which does that maintenance, so it's +not normally something one needs to worry about. Return values > 0 will be +mapped to zero in the VFS layer. ->readdir() and ->ioctl() on directories must be changed. Ideally we would move ->readdir() to inode_operations and use a separate method for directory @@ -471,8 +467,6 @@ components. And there are other reasons why the current interface is a mess... ->read on directories probably must go away - we should just enforce -EISDIR in sys_read() and friends. -->fsync() has i_mutex on inode. - --------------------------- dquot_operations ------------------------------- prototypes: int (*write_dquot) (struct dquot *); @@ -507,12 +501,12 @@ prototypes: int (*access)(struct vm_area_struct *, unsigned long, void*, int, int); locking rules: - BKL mmap_sem PageLocked(page) -open: no yes -close: no yes -fault: no yes can return with page locked -page_mkwrite: no yes can return with page locked -access: no yes + mmap_sem PageLocked(page) +open: yes +close: yes +fault: yes can return with page locked +page_mkwrite: yes can return with page locked +access: yes ->fault() is called when a previously not present pte is about to be faulted in. The filesystem must find and return the page associated @@ -539,6 +533,3 @@ VM_IO | VM_PFNMAP VMAs. (if you break something or notice that it is broken and do not fix it yourself - at least put it here) - -ipc/shm.c::shm_delete() - may need BKL. -->read() and ->write() in many drivers are (probably) missing BKL. diff --git a/Documentation/filesystems/dentry-locking.txt b/Documentation/filesystems/dentry-locking.txt deleted file mode 100644 index 79334ed5daa7..000000000000 --- a/Documentation/filesystems/dentry-locking.txt +++ /dev/null @@ -1,174 +0,0 @@ -RCU-based dcache locking model -============================== - -On many workloads, the most common operation on dcache is to look up a -dentry, given a parent dentry and the name of the child. Typically, -for every open(), stat() etc., the dentry corresponding to the -pathname will be looked up by walking the tree starting with the first -component of the pathname and using that dentry along with the next -component to look up the next level and so on. Since it is a frequent -operation for workloads like multiuser environments and web servers, -it is important to optimize this path. - -Prior to 2.5.10, dcache_lock was acquired in d_lookup and thus in -every component during path look-up. Since 2.5.10 onwards, fast-walk -algorithm changed this by holding the dcache_lock at the beginning and -walking as many cached path component dentries as possible. This -significantly decreases the number of acquisition of -dcache_lock. However it also increases the lock hold time -significantly and affects performance in large SMP machines. Since -2.5.62 kernel, dcache has been using a new locking model that uses RCU -to make dcache look-up lock-free. - -The current dcache locking model is not very different from the -existing dcache locking model. Prior to 2.5.62 kernel, dcache_lock -protected the hash chain, d_child, d_alias, d_lru lists as well as -d_inode and several other things like mount look-up. RCU-based changes -affect only the way the hash chain is protected. For everything else -the dcache_lock must be taken for both traversing as well as -updating. The hash chain updates too take the dcache_lock. The -significant change is the way d_lookup traverses the hash chain, it -doesn't acquire the dcache_lock for this and rely on RCU to ensure -that the dentry has not been *freed*. - - -Dcache locking details -====================== - -For many multi-user workloads, open() and stat() on files are very -frequently occurring operations. Both involve walking of path names to -find the dentry corresponding to the concerned file. In 2.4 kernel, -dcache_lock was held during look-up of each path component. Contention -and cache-line bouncing of this global lock caused significant -scalability problems. With the introduction of RCU in Linux kernel, -this was worked around by making the look-up of path components during -path walking lock-free. - - -Safe lock-free look-up of dcache hash table -=========================================== - -Dcache is a complex data structure with the hash table entries also -linked together in other lists. In 2.4 kernel, dcache_lock protected -all the lists. We applied RCU only on hash chain walking. The rest of -the lists are still protected by dcache_lock. Some of the important -changes are : - -1. The deletion from hash chain is done using hlist_del_rcu() macro - which doesn't initialize next pointer of the deleted dentry and - this allows us to walk safely lock-free while a deletion is - happening. - -2. Insertion of a dentry into the hash table is done using - hlist_add_head_rcu() which take care of ordering the writes - the - writes to the dentry must be visible before the dentry is - inserted. This works in conjunction with hlist_for_each_rcu(), - which has since been replaced by hlist_for_each_entry_rcu(), while - walking the hash chain. The only requirement is that all - initialization to the dentry must be done before - hlist_add_head_rcu() since we don't have dcache_lock protection - while traversing the hash chain. This isn't different from the - existing code. - -3. The dentry looked up without holding dcache_lock by cannot be - returned for walking if it is unhashed. It then may have a NULL - d_inode or other bogosity since RCU doesn't protect the other - fields in the dentry. We therefore use a flag DCACHE_UNHASHED to - indicate unhashed dentries and use this in conjunction with a - per-dentry lock (d_lock). Once looked up without the dcache_lock, - we acquire the per-dentry lock (d_lock) and check if the dentry is - unhashed. If so, the look-up is failed. If not, the reference count - of the dentry is increased and the dentry is returned. - -4. Once a dentry is looked up, it must be ensured during the path walk - for that component it doesn't go away. In pre-2.5.10 code, this was - done holding a reference to the dentry. dcache_rcu does the same. - In some sense, dcache_rcu path walking looks like the pre-2.5.10 - version. - -5. All dentry hash chain updates must take the dcache_lock as well as - the per-dentry lock in that order. dput() does this to ensure that - a dentry that has just been looked up in another CPU doesn't get - deleted before dget() can be done on it. - -6. There are several ways to do reference counting of RCU protected - objects. One such example is in ipv4 route cache where deferred - freeing (using call_rcu()) is done as soon as the reference count - goes to zero. This cannot be done in the case of dentries because - tearing down of dentries require blocking (dentry_iput()) which - isn't supported from RCU callbacks. Instead, tearing down of - dentries happen synchronously in dput(), but actual freeing happens - later when RCU grace period is over. This allows safe lock-free - walking of the hash chains, but a matched dentry may have been - partially torn down. The checking of DCACHE_UNHASHED flag with - d_lock held detects such dentries and prevents them from being - returned from look-up. - - -Maintaining POSIX rename semantics -================================== - -Since look-up of dentries is lock-free, it can race against a -concurrent rename operation. For example, during rename of file A to -B, look-up of either A or B must succeed. So, if look-up of B happens -after A has been removed from the hash chain but not added to the new -hash chain, it may fail. Also, a comparison while the name is being -written concurrently by a rename may result in false positive matches -violating rename semantics. Issues related to race with rename are -handled as described below : - -1. Look-up can be done in two ways - d_lookup() which is safe from - simultaneous renames and __d_lookup() which is not. If - __d_lookup() fails, it must be followed up by a d_lookup() to - correctly determine whether a dentry is in the hash table or - not. d_lookup() protects look-ups using a sequence lock - (rename_lock). - -2. The name associated with a dentry (d_name) may be changed if a - rename is allowed to happen simultaneously. To avoid memcmp() in - __d_lookup() go out of bounds due to a rename and false positive - comparison, the name comparison is done while holding the - per-dentry lock. This prevents concurrent renames during this - operation. - -3. Hash table walking during look-up may move to a different bucket as - the current dentry is moved to a different bucket due to rename. - But we use hlists in dcache hash table and they are - null-terminated. So, even if a dentry moves to a different bucket, - hash chain walk will terminate. [with a list_head list, it may not - since termination is when the list_head in the original bucket is - reached]. Since we redo the d_parent check and compare name while - holding d_lock, lock-free look-up will not race against d_move(). - -4. There can be a theoretical race when a dentry keeps coming back to - original bucket due to double moves. Due to this look-up may - consider that it has never moved and can end up in a infinite loop. - But this is not any worse that theoretical livelocks we already - have in the kernel. - - -Important guidelines for filesystem developers related to dcache_rcu -==================================================================== - -1. Existing dcache interfaces (pre-2.5.62) exported to filesystem - don't change. Only dcache internal implementation changes. However - filesystems *must not* delete from the dentry hash chains directly - using the list macros like allowed earlier. They must use dcache - APIs like d_drop() or __d_drop() depending on the situation. - -2. d_flags is now protected by a per-dentry lock (d_lock). All access - to d_flags must be protected by it. - -3. For a hashed dentry, checking of d_count needs to be protected by - d_lock. - - -Papers and other documentation on dcache locking -================================================ - -1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124). - -2. http://lse.sourceforge.net/locking/dcache/dcache.html - - - diff --git a/Documentation/filesystems/path-lookup.txt b/Documentation/filesystems/path-lookup.txt new file mode 100644 index 000000000000..eb59c8b44be9 --- /dev/null +++ b/Documentation/filesystems/path-lookup.txt @@ -0,0 +1,382 @@ +Path walking and name lookup locking +==================================== + +Path resolution is the finding a dentry corresponding to a path name string, by +performing a path walk. Typically, for every open(), stat() etc., the path name +will be resolved. Paths are resolved by walking the namespace tree, starting +with the first component of the pathname (eg. root or cwd) with a known dentry, +then finding the child of that dentry, which is named the next component in the +path string. Then repeating the lookup from the child dentry and finding its +child with the next element, and so on. + +Since it is a frequent operation for workloads like multiuser environments and +web servers, it is important to optimize this code. + +Path walking synchronisation history: +Prior to 2.5.10, dcache_lock was acquired in d_lookup (dcache hash lookup) and +thus in every component during path look-up. Since 2.5.10 onwards, fast-walk +algorithm changed this by holding the dcache_lock at the beginning and walking +as many cached path component dentries as possible. This significantly +decreases the number of acquisition of dcache_lock. However it also increases +the lock hold time significantly and affects performance in large SMP machines. +Since 2.5.62 kernel, dcache has been using a new locking model that uses RCU to +make dcache look-up lock-free. + +All the above algorithms required taking a lock and reference count on the +dentry that was looked up, so that may be used as the basis for walking the +next path element. This is inefficient and unscalable. It is inefficient +because of the locks and atomic operations required for every dentry element +slows things down. It is not scalable because many parallel applications that +are path-walk intensive tend to do path lookups starting from a common dentry +(usually, the root "/" or current working directory). So contention on these +common path elements causes lock and cacheline queueing. + +Since 2.6.38, RCU is used to make a significant part of the entire path walk +(including dcache look-up) completely "store-free" (so, no locks, atomics, or +even stores into cachelines of common dentries). This is known as "rcu-walk" +path walking. + +Path walking overview +===================== + +A name string specifies a start (root directory, cwd, fd-relative) and a +sequence of elements (directory entry names), which together refer to a path in +the namespace. A path is represented as a (dentry, vfsmount) tuple. The name +elements are sub-strings, seperated by '/'. + +Name lookups will want to find a particular path that a name string refers to +(usually the final element, or parent of final element). This is done by taking +the path given by the name's starting point (which we know in advance -- eg. +current->fs->cwd or current->fs->root) as the first parent of the lookup. Then +iteratively for each subsequent name element, look up the child of the current +parent with the given name and if it is not the desired entry, make it the +parent for the next lookup. + +A parent, of course, must be a directory, and we must have appropriate +permissions on the parent inode to be able to walk into it. + +Turning the child into a parent for the next lookup requires more checks and +procedures. Symlinks essentially substitute the symlink name for the target +name in the name string, and require some recursive path walking. Mount points +must be followed into (thus changing the vfsmount that subsequent path elements +refer to), switching from the mount point path to the root of the particular +mounted vfsmount. These behaviours are variously modified depending on the +exact path walking flags. + +Path walking then must, broadly, do several particular things: +- find the start point of the walk; +- perform permissions and validity checks on inodes; +- perform dcache hash name lookups on (parent, name element) tuples; +- traverse mount points; +- traverse symlinks; +- lookup and create missing parts of the path on demand. + +Safe store-free look-up of dcache hash table +============================================ + +Dcache name lookup +------------------ +In order to lookup a dcache (parent, name) tuple, we take a hash on the tuple +and use that to select a bucket in the dcache-hash table. The list of entries +in that bucket is then walked, and we do a full comparison of each entry +against our (parent, name) tuple. + +The hash lists are RCU protected, so list walking is not serialised with +concurrent updates (insertion, deletion from the hash). This is a standard RCU +list application with the exception of renames, which will be covered below. + +Parent and name members of a dentry, as well as its membership in the dcache +hash, and its inode are protected by the per-dentry d_lock spinlock. A +reference is taken on the dentry (while the fields are verified under d_lock), +and this stabilises its d_inode pointer and actual inode. This gives a stable +point to perform the next step of our path walk against. + +These members are also protected by d_seq seqlock, although this offers +read-only protection and no durability of results, so care must be taken when +using d_seq for synchronisation (see seqcount based lookups, below). + +Renames +------- +Back to the rename case. In usual RCU protected lists, the only operations that +will happen to an object is insertion, and then eventually removal from the +list. The object will not be reused until an RCU grace period is complete. +This ensures the RCU list traversal primitives can run over the object without +problems (see RCU documentation for how this works). + +However when a dentry is renamed, its hash value can change, requiring it to be +moved to a new hash list. Allocating and inserting a new alias would be +expensive and also problematic for directory dentries. Latency would be far to +high to wait for a grace period after removing the dentry and before inserting +it in the new hash bucket. So what is done is to insert the dentry into the +new list immediately. + +However, when the dentry's list pointers are updated to point to objects in the +new list before waiting for a grace period, this can result in a concurrent RCU +lookup of the old list veering off into the new (incorrect) list and missing +the remaining dentries on the list. + +There is no fundamental problem with walking down the wrong list, because the +dentry comparisons will never match. However it is fatal to miss a matching +dentry. So a seqlock is used to detect when a rename has occurred, and so the +lookup can be retried. + + 1 2 3 + +---+ +---+ +---+ +hlist-->| N-+->| N-+->| N-+-> +head <--+-P |<-+-P |<-+-P | + +---+ +---+ +---+ + +Rename of dentry 2 may require it deleted from the above list, and inserted +into a new list. Deleting 2 gives the following list. + + 1 3 + +---+ +---+ (don't worry, the longer pointers do not +hlist-->| N-+-------->| N-+-> impose a measurable performance overhead +head <--+-P |<--------+-P | on modern CPUs) + +---+ +---+ + ^ 2 ^ + | +---+ | + | | N-+----+ + +----+-P | + +---+ + +This is a standard RCU-list deletion, which leaves the deleted object's +pointers intact, so a concurrent list walker that is currently looking at +object 2 will correctly continue to object 3 when it is time to traverse the +next object. + +However, when inserting object 2 onto a new list, we end up with this: + + 1 3 + +---+ +---+ +hlist-->| N-+-------->| N-+-> +head <--+-P |<--------+-P | + +---+ +---+ + 2 + +---+ + | N-+----> + <----+-P | + +---+ + +Because we didn't wait for a grace period, there may be a concurrent lookup +still at 2. Now when it follows 2's 'next' pointer, it will walk off into +another list without ever having checked object 3. + +A related, but distinctly different, issue is that of rename atomicity versus +lookup operations. If a file is renamed from 'A' to 'B', a lookup must only +find either 'A' or 'B'. So if a lookup of 'A' returns NULL, a subsequent lookup +of 'B' must succeed (note the reverse is not true). + +Between deleting the dentry from the old hash list, and inserting it on the new +hash list, a lookup may find neither 'A' nor 'B' matching the dentry. The same +rename seqlock is also used to cover this race in much the same way, by +retrying a negative lookup result if a rename was in progress. + +Seqcount based lookups +---------------------- +In refcount based dcache lookups, d_lock is used to serialise access to +the dentry, stabilising it while comparing its name and parent and then +taking a reference count (the reference count then gives a stable place to +start the next part of the path walk from). + +As explained above, we would like to do path walking without taking locks or +reference counts on intermediate dentries along the path. To do this, a per +dentry seqlock (d_seq) is used to take a "coherent snapshot" of what the dentry +looks like (its name, parent, and inode). That snapshot is then used to start +the next part of the path walk. When loading the coherent snapshot under d_seq, +care must be taken to load the members up-front, and use those pointers rather +than reloading from the dentry later on (otherwise we'd have interesting things +like d_inode going NULL underneath us, if the name was unlinked). + +Also important is to avoid performing any destructive operations (pretty much: +no non-atomic stores to shared data), and to recheck the seqcount when we are +"done" with the operation. Retry or abort if the seqcount does not match. +Avoiding destructive or changing operations means we can easily unwind from +failure. + +What this means is that a caller, provided they are holding RCU lock to +protect the dentry object from disappearing, can perform a seqcount based +lookup which does not increment the refcount on the dentry or write to +it in any way. This returned dentry can be used for subsequent operations, +provided that d_seq is rechecked after that operation is complete. + +Inodes are also rcu freed, so the seqcount lookup dentry's inode may also be +queried for permissions. + +With this two parts of the puzzle, we can do path lookups without taking +locks or refcounts on dentry elements. + +RCU-walk path walking design +============================ + +Path walking code now has two distinct modes, ref-walk and rcu-walk. ref-walk +is the traditional[*] way of performing dcache lookups using d_lock to +serialise concurrent modifications to the dentry and take a reference count on +it. ref-walk is simple and obvious, and may sleep, take locks, etc while path +walking is operating on each dentry. rcu-walk uses seqcount based dentry +lookups, and can perform lookup of intermediate elements without any stores to +shared data in the dentry or inode. rcu-walk can not be applied to all cases, +eg. if the filesystem must sleep or perform non trivial operations, rcu-walk +must be switched to ref-walk mode. + +[*] RCU is still used for the dentry hash lookup in ref-walk, but not the full + path walk. + +Where ref-walk uses a stable, refcounted ``parent'' to walk the remaining +path string, rcu-walk uses a d_seq protected snapshot. When looking up a +child of this parent snapshot, we open d_seq critical section on the child +before closing d_seq critical section on the parent. This gives an interlocking +ladder of snapshots to walk down. + + + proc 101 + /----------------\ + / comm: "vi" \ + / fs.root: dentry0 \ + \ fs.cwd: dentry2 / + \ / + \----------------/ + +So when vi wants to open("/home/npiggin/test.c", O_RDWR), then it will +start from current->fs->root, which is a pinned dentry. Alternatively, +"./test.c" would start from cwd; both names refer to the same path in +the context of proc101. + + dentry 0 + +---------------------+ rcu-walk begins here, we note d_seq, check the + | name: "/" | inode's permission, and then look up the next + | inode: 10 | path element which is "home"... + | children:"home", ...| + +---------------------+ + | + dentry 1 V + +---------------------+ ... which brings us here. We find dentry1 via + | name: "home" | hash lookup, then note d_seq and compare name + | inode: 678 | string and parent pointer. When we have a match, + | children:"npiggin" | we now recheck the d_seq of dentry0. Then we + +---------------------+ check inode and look up the next element. + | + dentry2 V + +---------------------+ Note: if dentry0 is now modified, lookup is + | name: "npiggin" | not necessarily invalid, so we need only keep a + | inode: 543 | parent for d_seq verification, and grandparents + | children:"a.c", ... | can be forgotten. + +---------------------+ + | + dentry3 V + +---------------------+ At this point we have our destination dentry. + | name: "a.c" | We now take its d_lock, verify d_seq of this + | inode: 14221 | dentry. If that checks out, we can increment + | children:NULL | its refcount because we're holding d_lock. + +---------------------+ + +Taking a refcount on a dentry from rcu-walk mode, by taking its d_lock, +re-checking its d_seq, and then incrementing its refcount is called +"dropping rcu" or dropping from rcu-walk into ref-walk mode. + +It is, in some sense, a bit of a house of cards. If the seqcount check of the +parent snapshot fails, the house comes down, because we had closed the d_seq +section on the grandparent, so we have nothing left to stand on. In that case, +the path walk must be fully restarted (which we do in ref-walk mode, to avoid +live locks). It is costly to have a full restart, but fortunately they are +quite rare. + +When we reach a point where sleeping is required, or a filesystem callout +requires ref-walk, then instead of restarting the walk, we attempt to drop rcu +at the last known good dentry we have. Avoiding a full restart in ref-walk in +these cases is fundamental for performance and scalability because blocking +operations such as creates and unlinks are not uncommon. + +The detailed design for rcu-walk is like this: +* LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. +* Take the RCU lock for the entire path walk, starting with the acquiring + of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are + not required for dentry persistence. +* synchronize_rcu is called when unregistering a filesystem, so we can + access d_ops and i_ops during rcu-walk. +* Similarly take the vfsmount lock for the entire path walk. So now mnt + refcounts are not required for persistence. Also we are free to perform mount + lookups, and to assume dentry mount points and mount roots are stable up and + down the path. +* Have a per-dentry seqlock to protect the dentry name, parent, and inode, + so we can load this tuple atomically, and also check whether any of its + members have changed. +* Dentry lookups (based on parent, candidate string tuple) recheck the parent + sequence after the child is found in case anything changed in the parent + during the path walk. +* inode is also RCU protected so we can load d_inode and use the inode for + limited things. +* i_mode, i_uid, i_gid can be tested for exec permissions during path walk. +* i_op can be loaded. +* When the destination dentry is reached, drop rcu there (ie. take d_lock, + verify d_seq, increment refcount). +* If seqlock verification fails anywhere along the path, do a full restart + of the path lookup in ref-walk mode. -ECHILD tends to be used (for want of + a better errno) to signal an rcu-walk failure. + +The cases where rcu-walk cannot continue are: +* NULL dentry (ie. any uncached path element) +* Following links + +It may be possible eventually to make following links rcu-walk aware. + +Uncached path elements will always require dropping to ref-walk mode, at the +very least because i_mutex needs to be grabbed, and objects allocated. + +Final note: +"store-free" path walking is not strictly store free. We take vfsmount lock +and refcounts (both of which can be made per-cpu), and we also store to the +stack (which is essentially CPU-local), and we also have to take locks and +refcount on final dentry. + +The point is that shared data, where practically possible, is not locked +or stored into. The result is massive improvements in performance and +scalability of path resolution. + + +Interesting statistics +====================== + +The following table gives rcu lookup statistics for a few simple workloads +(2s12c24t Westmere, debian non-graphical system). Ungraceful are attempts to +drop rcu that fail due to d_seq failure and requiring the entire path lookup +again. Other cases are successful rcu-drops that are required before the final +element, nodentry for missing dentry, revalidate for filesystem revalidate +routine requiring rcu drop, permission for permission check requiring drop, +and link for symlink traversal requiring drop. + + rcu-lookups restart nodentry link revalidate permission +bootup 47121 0 4624 1010 10283 7852 +dbench 25386793 0 6778659(26.7%) 55 549 1156 +kbuild 2696672 10 64442(2.3%) 108764(4.0%) 1 1590 +git diff 39605 0 28 2 0 106 +vfstest 24185492 4945 708725(2.9%) 1076136(4.4%) 0 2651 + +What this shows is that failed rcu-walk lookups, ie. ones that are restarted +entirely with ref-walk, are quite rare. Even the "vfstest" case which +specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to excercise +such races is not showing a huge amount of restarts. + +Dropping from rcu-walk to ref-walk mean that we have encountered a dentry where +the reference count needs to be taken for some reason. This is either because +we have reached the target of the path walk, or because we have encountered a +condition that can't be resolved in rcu-walk mode. Ideally, we drop rcu-walk +only when we have reached the target dentry, so the other statistics show where +this does not happen. + +Note that a graceful drop from rcu-walk mode due to something such as the +dentry not existing (which can be common) is not necessarily a failure of +rcu-walk scheme, because some elements of the path may have been walked in +rcu-walk mode. The further we get from common path elements (such as cwd or +root), the less contended the dentry is likely to be. The closer we are to +common path elements, the more likely they will exist in dentry cache. + + +Papers and other documentation on dcache locking +================================================ + +1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124). + +2. http://lse.sourceforge.net/locking/dcache/dcache.html + + diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index b12c89538680..07a32b42cf9c 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -216,7 +216,6 @@ had ->revalidate()) add calls in ->follow_link()/->readlink(). ->d_parent changes are not protected by BKL anymore. Read access is safe if at least one of the following is true: * filesystem has no cross-directory rename() - * dcache_lock is held * we know that parent had been locked (e.g. we are looking at ->d_parent of ->lookup() argument). * we are called from ->rename(). @@ -318,3 +317,71 @@ if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput( may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly free the on-disk inode, you may end up doing that while ->write_inode() is writing to it. + +--- +[mandatory] + + .d_delete() now only advises the dcache as to whether or not to cache +unreferenced dentries, and is now only called when the dentry refcount goes to +0. Even on 0 refcount transition, it must be able to tolerate being called 0, +1, or more times (eg. constant, idempotent). + +--- +[mandatory] + + .d_compare() calling convention and locking rules are significantly +changed. Read updated documentation in Documentation/filesystems/vfs.txt (and +look at examples of other filesystems) for guidance. + +--- +[mandatory] + + .d_hash() calling convention and locking rules are significantly +changed. Read updated documentation in Documentation/filesystems/vfs.txt (and +look at examples of other filesystems) for guidance. + +--- +[mandatory] + dcache_lock is gone, replaced by fine grained locks. See fs/dcache.c +for details of what locks to replace dcache_lock with in order to protect +particular things. Most of the time, a filesystem only needs ->d_lock, which +protects *all* the dcache state of a given dentry. + +-- +[mandatory] + + Filesystems must RCU-free their inodes, if they can have been accessed +via rcu-walk path walk (basically, if the file can have had a path name in the +vfs namespace). + + i_dentry and i_rcu share storage in a union, and the vfs expects +i_dentry to be reinitialized before it is freed, so an: + + INIT_LIST_HEAD(&inode->i_dentry); + +must be done in the RCU callback. + +-- +[recommended] + vfs now tries to do path walking in "rcu-walk mode", which avoids +atomic operations and scalability hazards on dentries and inodes (see +Documentation/filesystems/path-walk.txt). d_hash and d_compare changes (above) +are examples of the changes required to support this. For more complex +filesystem callbacks, the vfs drops out of rcu-walk mode before the fs call, so +no changes are required to the filesystem. However, this is costly and loses +the benefits of rcu-walk mode. We will begin to add filesystem callbacks that +are rcu-walk aware, shown below. Filesystems should take advantage of this +where possible. + +-- +[mandatory] + d_revalidate is a callback that is made on every path element (if +the filesystem provides it), which requires dropping out of rcu-walk mode. This +may now be called in rcu-walk mode (nd->flags & LOOKUP_RCU). -ECHILD should be +returned if the filesystem cannot handle rcu-walk. See +Documentation/filesystems/vfs.txt for more details. + + permission and check_acl are inode permission checks that are called +on many or all directory inodes on the way down a path walk (to check for +exec permission). These must now be rcu-walk aware (flags & IPERM_RCU). See +Documentation/filesystems/vfs.txt for more details. diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index e73df2722ff3..9471225212c4 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1181,6 +1181,30 @@ Table 1-12: Files in /proc/fs/ext4/<devname> mb_groups details of multiblock allocator buddy cache of free blocks .............................................................................. +2.0 /proc/consoles +------------------ +Shows registered system console lines. + +To see which character device lines are currently used for the system console +/dev/console, you may simply look into the file /proc/consoles: + + > cat /proc/consoles + tty0 -WU (ECp) 4:7 + ttyS0 -W- (Ep) 4:64 + +The columns are: + + device name of the device + operations R = can do read operations + W = can do write operations + U = can do unblank + flags E = it is enabled + C = it is prefered console + B = it is primary boot console + p = it is used for printk buffer + b = it is not a TTY but a Braille device + a = it is safe to use when cpu is offline + major:minor major and minor number of the device separated by a colon ------------------------------------------------------------------------------ Summary diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 20899e095e7e..fbb324e2bd43 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -325,7 +325,8 @@ struct inode_operations { void * (*follow_link) (struct dentry *, struct nameidata *); void (*put_link) (struct dentry *, struct nameidata *, void *); void (*truncate) (struct inode *); - int (*permission) (struct inode *, int, struct nameidata *); + int (*permission) (struct inode *, int, unsigned int); + int (*check_acl)(struct inode *, int, unsigned int); int (*setattr) (struct dentry *, struct iattr *); int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *); int (*setxattr) (struct dentry *, const char *,const void *,size_t,int); @@ -414,6 +415,13 @@ otherwise noted. permission: called by the VFS to check for access rights on a POSIX-like filesystem. + May be called in rcu-walk mode (flags & IPERM_RCU). If in rcu-walk + mode, the filesystem must check the permission without blocking or + storing to the inode. + + If a situation is encountered that rcu-walk cannot handle, return + -ECHILD and it will be called again in ref-walk mode. + setattr: called by the VFS to set attributes for a file. This method is called by chmod(2) and related system calls. @@ -847,9 +855,12 @@ defined: struct dentry_operations { int (*d_revalidate)(struct dentry *, struct nameidata *); - int (*d_hash) (struct dentry *, struct qstr *); - int (*d_compare) (struct dentry *, struct qstr *, struct qstr *); - int (*d_delete)(struct dentry *); + int (*d_hash)(const struct dentry *, const struct inode *, + struct qstr *); + int (*d_compare)(const struct dentry *, const struct inode *, + const struct dentry *, const struct inode *, + unsigned int, const char *, const struct qstr *); + int (*d_delete)(const struct dentry *); void (*d_release)(struct dentry *); void (*d_iput)(struct dentry *, struct inode *); char *(*d_dname)(struct dentry *, char *, int); @@ -860,13 +871,45 @@ struct dentry_operations { dcache. Most filesystems leave this as NULL, because all their dentries in the dcache are valid - d_hash: called when the VFS adds a dentry to the hash table + d_revalidate may be called in rcu-walk mode (nd->flags & LOOKUP_RCU). + If in rcu-walk mode, the filesystem must revalidate the dentry without + blocking or storing to the dentry, d_parent and d_inode should not be + used without care (because they can go NULL), instead nd->inode should + be used. + + If a situation is encountered that rcu-walk cannot handle, return + -ECHILD and it will be called again in ref-walk mode. + + d_hash: called when the VFS adds a dentry to the hash table. The first + dentry passed to d_hash is the parent directory that the name is + to be hashed into. The inode is the dentry's inode. + + Same locking and synchronisation rules as d_compare regarding + what is safe to dereference etc. + + d_compare: called to compare a dentry name with a given name. The first + dentry is the parent of the dentry to be compared, the second is + the parent's inode, then the dentry and inode (may be NULL) of the + child dentry. len and name string are properties of the dentry to be + compared. qstr is the name to compare it with. + + Must be constant and idempotent, and should not take locks if + possible, and should not or store into the dentry or inodes. + Should not dereference pointers outside the dentry or inodes without + lots of care (eg. d_parent, d_inode, d_name should not be used). + + However, our vfsmount is pinned, and RCU held, so the dentries and + inodes won't disappear, neither will our sb or filesystem module. + ->i_sb and ->d_sb may be used. - d_compare: called when a dentry should be compared with another + It is a tricky calling convention because it needs to be called under + "rcu-walk", ie. without any locks or references on things. - d_delete: called when the last reference to a dentry is - deleted. This means no-one is using the dentry, however it is - still valid and in the dcache + d_delete: called when the last reference to a dentry is dropped and the + dcache is deciding whether or not to cache it. Return 1 to delete + immediately, or 0 to cache the dentry. Default is NULL which means to + always cache a reachable dentry. d_delete must be constant and + idempotent. d_release: called when a dentry is really deallocated @@ -910,14 +953,11 @@ manipulate dentries: the usage count) dput: close a handle for a dentry (decrements the usage count). If - the usage count drops to 0, the "d_delete" method is called - and the dentry is placed on the unused list if the dentry is - still in its parents hash list. Putting the dentry on the - unused list just means that if the system needs some RAM, it - goes through the unused list of dentries and deallocates them. - If the dentry has already been unhashed and the usage count - drops to 0, in this case the dentry is deallocated after the - "d_delete" method is called + the usage count drops to 0, and the dentry is still in its + parent's hash, the "d_delete" method is called to check whether + it should be cached. If it should not be cached, or if the dentry + is not hashed, it is deleted. Otherwise cached dentries are put + into an LRU list to be reclaimed on memory shortage. d_drop: this unhashes a dentry from its parents hash list. A subsequent call to dput() will deallocate the dentry if its diff --git a/Documentation/hwmon/ds620 b/Documentation/hwmon/ds620 new file mode 100644 index 000000000000..1fbe3cd916cc --- /dev/null +++ b/Documentation/hwmon/ds620 @@ -0,0 +1,34 @@ +Kernel driver ds620 +=================== + +Supported chips: + * Dallas Semiconductor DS620 + Prefix: 'ds620' + Datasheet: Publicly available at the Dallas Semiconductor website + http://www.dalsemi.com/ + +Authors: + Roland Stigge <stigge@antcom.de> + based on ds1621.c by + Christian W. Zuckschwerdt <zany@triq.net> + +Description +----------- + +The DS620 is a (one instance) digital thermometer and thermostat. It has both +high and low temperature limits which can be user defined (i.e. programmed +into non-volatile on-chip registers). Temperature range is -55 degree Celsius +to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value +returned via sysfs displays post decimal positions. + +The thermostat function works as follows: When configured via platform_data +(struct ds620_platform_data) .pomode == 0 (default), the thermostat output pin +PO is always low. If .pomode == 1, the thermostat is in PO_LOW mode. I.e., the +output pin PO becomes active when the temperature falls below temp1_min and +stays active until the temperature goes above temp1_max. + +Likewise, with .pomode == 2, the thermostat is in PO_HIGH mode. I.e., the PO +output pin becomes active when the temperature goes above temp1_max and stays +active until the temperature falls below temp1_min. + +The PO output pin of the DS620 operates active-low. diff --git a/Documentation/hwmon/sht21 b/Documentation/hwmon/sht21 new file mode 100644 index 000000000000..db17fda45c3e --- /dev/null +++ b/Documentation/hwmon/sht21 @@ -0,0 +1,49 @@ +Kernel driver sht21 +=================== + +Supported chips: + * Sensirion SHT21 + Prefix: 'sht21' + Addresses scanned: none + Datasheet: Publicly available at the Sensirion website + http://www.sensirion.com/en/pdf/product_information/Datasheet-humidity-sensor-SHT21.pdf + + * Sensirion SHT25 + Prefix: 'sht21' + Addresses scanned: none + Datasheet: Publicly available at the Sensirion website + http://www.sensirion.com/en/pdf/product_information/Datasheet-humidity-sensor-SHT25.pdf + +Author: + Urs Fleisch <urs.fleisch@sensirion.com> + +Description +----------- + +The SHT21 and SHT25 are humidity and temperature sensors in a DFN package of +only 3 x 3 mm footprint and 1.1 mm height. The difference between the two +devices is the higher level of precision of the SHT25 (1.8% relative humidity, +0.2 degree Celsius) compared with the SHT21 (2.0% relative humidity, +0.3 degree Celsius). + +The devices communicate with the I2C protocol. All sensors are set to the same +I2C address 0x40, so an entry with I2C_BOARD_INFO("sht21", 0x40) can be used +in the board setup code. + +sysfs-Interface +--------------- + +temp1_input - temperature input +humidity1_input - humidity input + +Notes +----- + +The driver uses the default resolution settings of 12 bit for humidity and 14 +bit for temperature, which results in typical measurement times of 22 ms for +humidity and 66 ms for temperature. To keep self heating below 0.1 degree +Celsius, the device should not be active for more than 10% of the time, +e.g. maximum two measurements per second at the given resolution. + +Different resolutions, the on-chip heater, using the CRC checksum and reading +the serial number are not supported yet. diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 645699010551..c6559f153589 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -384,10 +384,20 @@ curr[1-*]_min Current min value. Unit: milliampere RW +curr[1-*]_lcrit Current critical low value + Unit: milliampere + RW + +curr[1-*]_crit Current critical high value. + Unit: milliampere + RW + curr[1-*]_input Current input value Unit: milliampere RO +Also see the Alarms section for status flags associated with currents. + ********* * Power * ********* @@ -450,13 +460,6 @@ power[1-*]_accuracy Accuracy of the power meter. Unit: Percent RO -power[1-*]_alarm 1 if the system is drawing more power than the - cap allows; 0 otherwise. A poll notification is - sent to this file when the power use exceeds the - cap. This file only appears if the cap is known - to be enforced by hardware. - RO - power[1-*]_cap If power use rises above this limit, the system should take action to reduce power use. A poll notification is sent to this file if the @@ -479,6 +482,20 @@ power[1-*]_cap_min Minimum cap that can be set. Unit: microWatt RO +power[1-*]_max Maximum power. + Unit: microWatt + RW + +power[1-*]_crit Critical maximum power. + If power rises to or above this limit, the + system is expected take drastic action to reduce + power consumption, such as a system shutdown or + a forced powerdown of some devices. + Unit: microWatt + RW + +Also see the Alarms section for status flags associated with power readings. + ********** * Energy * ********** @@ -488,6 +505,15 @@ energy[1-*]_input Cumulative energy use RO +************ +* Humidity * +************ + +humidity[1-*]_input Humidity + Unit: milli-percent (per cent mille, pcm) + RO + + ********** * Alarms * ********** @@ -501,6 +527,7 @@ implementation. in[0-*]_alarm curr[1-*]_alarm +power[1-*]_alarm fan[1-*]_alarm temp[1-*]_alarm Channel alarm @@ -512,12 +539,20 @@ OR in[0-*]_min_alarm in[0-*]_max_alarm +in[0-*]_lcrit_alarm +in[0-*]_crit_alarm curr[1-*]_min_alarm curr[1-*]_max_alarm +curr[1-*]_lcrit_alarm +curr[1-*]_crit_alarm +power[1-*]_cap_alarm +power[1-*]_max_alarm +power[1-*]_crit_alarm fan[1-*]_min_alarm fan[1-*]_max_alarm temp[1-*]_min_alarm temp[1-*]_max_alarm +temp[1-*]_lcrit_alarm temp[1-*]_crit_alarm temp[1-*]_emergency_alarm Limit alarm diff --git a/Documentation/i2c/muxes/gpio-i2cmux b/Documentation/i2c/muxes/gpio-i2cmux new file mode 100644 index 000000000000..811cd78d4cdc --- /dev/null +++ b/Documentation/i2c/muxes/gpio-i2cmux @@ -0,0 +1,65 @@ +Kernel driver gpio-i2cmux + +Author: Peter Korsgaard <peter.korsgaard@barco.com> + +Description +----------- + +gpio-i2cmux is an i2c mux driver providing access to I2C bus segments +from a master I2C bus and a hardware MUX controlled through GPIO pins. + +E.G.: + + ---------- ---------- Bus segment 1 - - - - - + | | SCL/SDA | |-------------- | | + | |------------| | + | | | | Bus segment 2 | | + | Linux | GPIO 1..N | MUX |--------------- Devices + | |------------| | | | + | | | | Bus segment M + | | | |---------------| | + ---------- ---------- - - - - - + +SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M +according to the settings of the GPIO pins 1..N. + +Usage +----- + +gpio-i2cmux uses the platform bus, so you need to provide a struct +platform_device with the platform_data pointing to a struct +gpio_i2cmux_platform_data with the I2C adapter number of the master +bus, the number of bus segments to create and the GPIO pins used +to control it. See include/linux/gpio-i2cmux.h for details. + +E.G. something like this for a MUX providing 4 bus segments +controlled through 3 GPIO pins: + +#include <linux/gpio-i2cmux.h> +#include <linux/platform_device.h> + +static const unsigned myboard_gpiomux_gpios[] = { + AT91_PIN_PC26, AT91_PIN_PC25, AT91_PIN_PC24 +}; + +static const unsigned myboard_gpiomux_values[] = { + 0, 1, 2, 3 +}; + +static struct gpio_i2cmux_platform_data myboard_i2cmux_data = { + .parent = 1, + .base_nr = 2, /* optional */ + .values = myboard_gpiomux_values, + .n_values = ARRAY_SIZE(myboard_gpiomux_values), + .gpios = myboard_gpiomux_gpios, + .n_gpios = ARRAY_SIZE(myboard_gpiomux_gpios), + .idle = 4, /* optional */ +}; + +static struct platform_device myboard_i2cmux = { + .name = "gpio-i2cmux", + .id = 0, + .dev = { + .platform_data = &myboard_i2cmux_data, + }, +}; diff --git a/Documentation/input/cma3000_d0x.txt b/Documentation/input/cma3000_d0x.txt new file mode 100644 index 000000000000..29d088db4afd --- /dev/null +++ b/Documentation/input/cma3000_d0x.txt @@ -0,0 +1,115 @@ +Kernel driver for CMA3000-D0x +============================ + +Supported chips: +* VTI CMA3000-D0x +Datasheet: + CMA3000-D0X Product Family Specification 8281000A.02.pdf + <http://www.vti.fi/en/> + +Author: Hemanth V <hemanthv@ti.com> + + +Description +----------- +CMA3000 Tri-axis accelerometer supports Motion detect, Measurement and +Free fall modes. + +Motion Detect Mode: Its the low power mode where interrupts are generated only +when motion exceeds the defined thresholds. + +Measurement Mode: This mode is used to read the acceleration data on X,Y,Z +axis and supports 400, 100, 40 Hz sample frequency. + +Free fall Mode: This mode is intended to save system resources. + +Threshold values: Chip supports defining threshold values for above modes +which includes time and g value. Refer product specifications for more details. + +CMA3000 chip supports mutually exclusive I2C and SPI interfaces for +communication, currently the driver supports I2C based communication only. +Initial configuration for bus mode is set in non volatile memory and can later +be modified through bus interface command. + +Driver reports acceleration data through input subsystem. It generates ABS_MISC +event with value 1 when free fall is detected. + +Platform data need to be configured for initial default values. + +Platform Data +------------- +fuzz_x: Noise on X Axis + +fuzz_y: Noise on Y Axis + +fuzz_z: Noise on Z Axis + +g_range: G range in milli g i.e 2000 or 8000 + +mode: Default Operating mode + +mdthr: Motion detect g range threshold value + +mdfftmr: Motion detect and free fall time threshold value + +ffthr: Free fall g range threshold value + +Input Interface +-------------- +Input driver version is 1.0.0 +Input device ID: bus 0x18 vendor 0x0 product 0x0 version 0x0 +Input device name: "cma3000-accelerometer" +Supported events: + Event type 0 (Sync) + Event type 3 (Absolute) + Event code 0 (X) + Value 47 + Min -8000 + Max 8000 + Fuzz 200 + Event code 1 (Y) + Value -28 + Min -8000 + Max 8000 + Fuzz 200 + Event code 2 (Z) + Value 905 + Min -8000 + Max 8000 + Fuzz 200 + Event code 40 (Misc) + Value 0 + Min 0 + Max 1 + Event type 4 (Misc) + + +Register/Platform parameters Description +---------------------------------------- + +mode: + 0: power down mode + 1: 100 Hz Measurement mode + 2: 400 Hz Measurement mode + 3: 40 Hz Measurement mode + 4: Motion Detect mode (default) + 5: 100 Hz Free fall mode + 6: 40 Hz Free fall mode + 7: Power off mode + +grange: + 2000: 2000 mg or 2G Range + 8000: 8000 mg or 8G Range + +mdthr: + X: X * 71mg (8G Range) + X: X * 18mg (2G Range) + +mdfftmr: + X: (X & 0x70) * 100 ms (MDTMR) + (X & 0x0F) * 2.5 ms (FFTMR 400 Hz) + (X & 0x0F) * 10 ms (FFTMR 100 Hz) + +ffthr: + X: (X >> 2) * 18mg (2G Range) + X: (X & 0x0F) * 71 mg (8G Range) diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index bdcba154b83e..71536e78406f 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -1,6 +1,6 @@ Multi-touch (MT) Protocol ------------------------- - Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se> + Copyright (C) 2009-2010 Henrik Rydberg <rydberg@euromail.se> Introduction @@ -161,19 +161,24 @@ against the glass. The inner region will increase, and in general, the ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than unity, is related to the contact pressure. For pressure-based devices, ABS_MT_PRESSURE may be used to provide the pressure on the contact area -instead. +instead. Devices capable of contact hovering can use ABS_MT_DISTANCE to +indicate the distance between the contact and the surface. In addition to the MAJOR parameters, the oval shape of the contact can be described by adding the MINOR parameters, such that MAJOR and MINOR are the major and minor axis of an ellipse. Finally, the orientation of the oval shape can be describe with the ORIENTATION parameter. +For type A devices, further specification of the touch shape is possible +via ABS_MT_BLOB_ID. + The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a -contact or a pen or something else. Devices with more granular information -may specify general shapes as blobs, i.e., as a sequence of rectangular -shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices -that currently support it, the ABS_MT_TRACKING_ID event may be used to -report contact tracking from hardware [5]. +finger or a pen or something else. Finally, the ABS_MT_TRACKING_ID event +may be used to track identified contacts over time [5]. + +In the type B protocol, ABS_MT_TOOL_TYPE and ABS_MT_TRACKING_ID are +implicitly handled by input core; drivers should instead call +input_mt_report_slot_state(). Event Semantics @@ -213,6 +218,12 @@ The pressure, in arbitrary units, on the contact area. May be used instead of TOUCH and WIDTH for pressure-based devices or any device with a spatial signal intensity distribution. +ABS_MT_DISTANCE + +The distance, in surface units, between the contact and the surface. Zero +distance means the contact is touching the surface. A positive number means +the contact is hovering above the surface. + ABS_MT_ORIENTATION The orientation of the ellipse. The value should describe a signed quarter @@ -240,21 +251,24 @@ ABS_MT_TOOL_TYPE The type of approaching tool. A lot of kernel drivers cannot distinguish between different tool types, such as a finger or a pen. In such cases, the event should be omitted. The protocol currently supports MT_TOOL_FINGER and -MT_TOOL_PEN [2]. +MT_TOOL_PEN [2]. For type B devices, this event is handled by input core; +drivers should instead use input_mt_report_slot_state(). ABS_MT_BLOB_ID The BLOB_ID groups several packets together into one arbitrarily shaped -contact. This is a low-level anonymous grouping for type A devices, and +contact. The sequence of points forms a polygon which defines the shape of +the contact. This is a low-level anonymous grouping for type A devices, and should not be confused with the high-level trackingID [5]. Most type A devices do not have blob capability, so drivers can safely omit this event. ABS_MT_TRACKING_ID The TRACKING_ID identifies an initiated contact throughout its life cycle -[5]. This event is mandatory for type B devices. The value range of the -TRACKING_ID should be large enough to ensure unique identification of a -contact maintained over an extended period of time. +[5]. The value range of the TRACKING_ID should be large enough to ensure +unique identification of a contact maintained over an extended period of +time. For type B devices, this event is handled by input core; drivers +should instead use input_mt_report_slot_state(). Event Computation @@ -301,18 +315,19 @@ and with ORIENTATION, one can detect twisting of fingers. Notes ----- -In order to stay compatible with existing applications, the data -reported in a finger packet must not be recognized as single-touch -events. In addition, all finger data must bypass input filtering, -since subsequent events of the same type refer to different fingers. +In order to stay compatible with existing applications, the data reported +in a finger packet must not be recognized as single-touch events. + +For type A devices, all finger data bypasses input filtering, since +subsequent events of the same type refer to different fingers. -The first kernel driver to utilize the MT protocol is the bcm5974 driver, -where examples can be found. +For example usage of the type A protocol, see the bcm5974 driver. For +example usage of the type B protocol, see the hid-egalax driver. [1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the difference between the contact position and the approaching tool position could be used to derive tilt. [2] The list can of course be extended. -[3] Multitouch X driver project: http://bitmath.org/code/multitouch/. +[3] The mtdev project: http://bitmath.org/code/mtdev/. [4] See the section on event computation. [5] See the section on finger tracking. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 63ffd78824d8..d6a63c7b4478 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -155,7 +155,6 @@ Code Seq#(hex) Include File Comments 'Q' all linux/soundcard.h 'R' 00-1F linux/random.h conflict! 'R' 01 linux/rfkill.h conflict! -'R' 01-0F media/rds.h conflict! 'R' C0-DF net/bluetooth/rfcomm.h 'S' all linux/cdrom.h conflict! 'S' 80-81 scsi/scsi_ioctl.h conflict! @@ -194,7 +193,6 @@ Code Seq#(hex) Include File Comments <http://lrcwww.epfl.ch/> 'b' 00-FF conflict! bit3 vme host bridge <mailto:natalia@nikhefk.nikhef.nl> -'b' 00-0F media/bt819.h conflict! 'c' all linux/cm4000_cs.h conflict! 'c' 00-7F linux/comstats.h conflict! 'c' 00-7F linux/coda.h conflict! @@ -260,14 +258,11 @@ Code Seq#(hex) Include File Comments 't' 80-8F linux/isdn_ppp.h 't' 90 linux/toshiba.h 'u' 00-1F linux/smb_fs.h gone -'v' all linux/videodev.h conflict! 'v' 00-1F linux/ext2_fs.h conflict! 'v' 00-1F linux/fs.h conflict! 'v' 00-0F linux/sonypi.h conflict! -'v' C0-CF drivers/media/video/ov511.h conflict! 'v' C0-DF media/pwc-ioctl.h conflict! 'v' C0-FF linux/meye.h conflict! -'v' C0-CF drivers/media/video/zoran/zoran.h conflict! 'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict! 'w' all CERN SCI driver 'y' 00-1F packet based user level communications @@ -278,7 +273,6 @@ Code Seq#(hex) Include File Comments <mailto:oe@port.de> 'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict! 0x80 00-1F linux/fb.h -0x88 00-3F media/ovcamchip.h 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h 0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 1e5165aa9e4e..4a990317b84a 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -73,6 +73,14 @@ Specify the output directory when building the kernel. The output directory can also be specified using "O=...". Setting "O=..." takes precedence over KBUILD_OUTPUT. +KBUILD_DEBARCH +-------------------------------------------------- +For the deb-pkg target, allows overriding the normal heuristics deployed by +deb-pkg. Normally deb-pkg attempts to guess the right architecture based on +the UTS_MACHINE variable, and on some architectures also the kernel config. +The value of KBUILD_DEBARCH is assumed (not checked) to be a valid Debian +architecture. + ARCH -------------------------------------------------- Set ARCH to the architecture to be built. diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 2fe93ca7c77c..b507d61fd41c 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -112,7 +112,6 @@ applicable everywhere (see syntax). (no prompts anywhere) and for symbols with no dependencies. That will limit the usefulness but on the other hand avoid the illegal configurations all over. - kconfig should one day warn about such things. - numerical ranges: "range" <symbol> <symbol> ["if" <expr>] This allows to limit the range of possible input values for int @@ -268,7 +267,7 @@ separate list of options. choices: - "choice" + "choice" [symbol] <choice options> <choice block> "endchoice" @@ -282,6 +281,10 @@ single driver can be compiled/loaded into the kernel, but all drivers can be compiled as modules. A choice accepts another option "optional", which allows to set the choice to 'n' and no entry needs to be selected. +If no [symbol] is associated with a choice, then you can not have multiple +definitions of that choice. If a [symbol] is associated to the choice, +then you may define the same choice (ie. with the same entries) in another +place. comment: diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 0ef00bd6e54d..86e3cd0d26a0 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -1136,6 +1136,21 @@ When kbuild executes, the following steps are followed (roughly): resulting in the target file being recompiled for no obvious reason. + dtc + Create flattend device tree blob object suitable for linking + into vmlinux. Device tree blobs linked into vmlinux are placed + in an init section in the image. Platform code *must* copy the + blob to non-init memory prior to calling unflatten_device_tree(). + + Example: + #arch/x86/platform/ce4100/Makefile + clean-files := *dtb.S + + DTC_FLAGS := -p 1024 + obj-y += foo.dtb.o + + $(obj)/%.dtb: $(src)/%.dts + $(call cmd,dtc) --- 6.7 Custom kbuild commands diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index 715eaaf1519d..9a8674629a07 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -537,7 +537,7 @@ Notes: Further information in http://www.oreilly.com/catalog/linuxdrive2/ - * Title: "Linux Device Drivers, 3nd Edition" + * Title: "Linux Device Drivers, 3rd Edition" Authors: Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman Publisher: O'Reilly & Associates. Date: 2005. @@ -592,14 +592,6 @@ Pages: 600. ISBN: 0-13-101908-2 - * Title: "The Design and Implementation of the 4.4 BSD UNIX - Operating System" - Author: Marshall Kirk McKusick, Keith Bostic, Michael J. Karels, - John S. Quarterman. - Publisher: Addison-Wesley. - Date: 1996. - ISBN: 0-201-54979-4 - * Title: "Programming for the real world - POSIX.4" Author: Bill O. Gallmeister. Publisher: O'Reilly & Associates, Inc.. @@ -610,28 +602,13 @@ POSIX. Good reference. * Title: "UNIX Systems for Modern Architectures: Symmetric - Multiprocesssing and Caching for Kernel Programmers" + Multiprocessing and Caching for Kernel Programmers" Author: Curt Schimmel. Publisher: Addison Wesley. Date: June, 1994. Pages: 432. ISBN: 0-201-63338-8 - * Title: "The Design and Implementation of the 4.3 BSD UNIX - Operating System" - Author: Samuel J. Leffler, Marshall Kirk McKusick, Michael J. - Karels, John S. Quarterman. - Publisher: Addison-Wesley. - Date: 1989 (reprinted with corrections on October, 1990). - ISBN: 0-201-06196-1 - - * Title: "The Design of the UNIX Operating System" - Author: Maurice J. Bach. - Publisher: Prentice Hall. - Date: 1986. - Pages: 471. - ISBN: 0-13-201757-1 - MISCELLANEOUS: * Name: linux/Documentation diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e51fbd88661d..ed3708f8d0db 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1587,20 +1587,12 @@ and is between 256 and 4096 characters. It is defined in the file nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels Format: [panic,][num] - Valid num: 0,1,2 + Valid num: 0 0 - turn nmi_watchdog off - 1 - use the IO-APIC timer for the NMI watchdog - 2 - use the local APIC for the NMI watchdog using - a performance counter. Note: This will use one - performance counter and the local APIC's performance - vector. When panic is specified, panic when an NMI watchdog timeout occurs. This is useful when you use a panic=... timeout and need the box quickly up again. - Instead of 1 and 2 it is possible to use the following - symbolic names: lapic and ioapic - Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic netpoll.carrier_timeout= [NET] Specifies amount of time (in seconds) that @@ -1630,6 +1622,8 @@ and is between 256 and 4096 characters. It is defined in the file noapic [SMP,APIC] Tells the kernel to not make use of any IOAPICs that may be present in the system. + noautogroup Disable scheduler automatic task group creation. + nobats [PPC] Do not use BATs for mapping kernel lowmem on "Classic" PPC cores. @@ -1767,7 +1761,7 @@ and is between 256 and 4096 characters. It is defined in the file nousb [USB] Disable the USB subsystem - nowatchdog [KNL] Disable the lockup detector. + nowatchdog [KNL] Disable the lockup detector (NMI watchdog). nowb [ARM] @@ -2475,12 +2469,13 @@ and is between 256 and 4096 characters. It is defined in the file to facilitate early boot debugging. See also Documentation/trace/events.txt - tsc= Disable clocksource-must-verify flag for TSC. + tsc= Disable clocksource stability checks for TSC. Format: <string> [x86] reliable: mark tsc clocksource as reliable, this - disables clocksource verification at runtime. - Used to enable high-resolution timer mode on older - hardware, and in virtualized environment. + disables clocksource verification at runtime, as well + as the stability checks done at bootup. Used to enable + high-resolution timer mode on older hardware, and in + virtualized environment. [x86] noirqtime: Do not use TSC to do irq accounting. Used to run time disable IRQ_TIME_ACCOUNTING on any platforms where RDTSC is slow and this accounting diff --git a/Documentation/keys-trusted-encrypted.txt b/Documentation/keys-trusted-encrypted.txt new file mode 100644 index 000000000000..8fb79bc1ac4b --- /dev/null +++ b/Documentation/keys-trusted-encrypted.txt @@ -0,0 +1,145 @@ + Trusted and Encrypted Keys + +Trusted and Encrypted Keys are two new key types added to the existing kernel +key ring service. Both of these new types are variable length symmetic keys, +and in both cases all keys are created in the kernel, and user space sees, +stores, and loads only encrypted blobs. Trusted Keys require the availability +of a Trusted Platform Module (TPM) chip for greater security, while Encrypted +Keys can be used on any system. All user level blobs, are displayed and loaded +in hex ascii for convenience, and are integrity verified. + +Trusted Keys use a TPM both to generate and to seal the keys. Keys are sealed +under a 2048 bit RSA key in the TPM, and optionally sealed to specified PCR +(integrity measurement) values, and only unsealed by the TPM, if PCRs and blob +integrity verifications match. A loaded Trusted Key can be updated with new +(future) PCR values, so keys are easily migrated to new pcr values, such as +when the kernel and initramfs are updated. The same key can have many saved +blobs under different PCR values, so multiple boots are easily supported. + +By default, trusted keys are sealed under the SRK, which has the default +authorization value (20 zeros). This can be set at takeownership time with the +trouser's utility: "tpm_takeownership -u -z". + +Usage: + keyctl add trusted name "new keylen [options]" ring + keyctl add trusted name "load hex_blob [pcrlock=pcrnum]" ring + keyctl update key "update [options]" + keyctl print keyid + + options: + keyhandle= ascii hex value of sealing key default 0x40000000 (SRK) + keyauth= ascii hex auth for sealing key default 0x00...i + (40 ascii zeros) + blobauth= ascii hex auth for sealed data default 0x00... + (40 ascii zeros) + blobauth= ascii hex auth for sealed data default 0x00... + (40 ascii zeros) + pcrinfo= ascii hex of PCR_INFO or PCR_INFO_LONG (no default) + pcrlock= pcr number to be extended to "lock" blob + migratable= 0|1 indicating permission to reseal to new PCR values, + default 1 (resealing allowed) + +"keyctl print" returns an ascii hex copy of the sealed key, which is in standard +TPM_STORED_DATA format. The key length for new keys are always in bytes. +Trusted Keys can be 32 - 128 bytes (256 - 1024 bits), the upper limit is to fit +within the 2048 bit SRK (RSA) keylength, with all necessary structure/padding. + +Encrypted keys do not depend on a TPM, and are faster, as they use AES for +encryption/decryption. New keys are created from kernel generated random +numbers, and are encrypted/decrypted using a specified 'master' key. The +'master' key can either be a trusted-key or user-key type. The main +disadvantage of encrypted keys is that if they are not rooted in a trusted key, +they are only as secure as the user key encrypting them. The master user key +should therefore be loaded in as secure a way as possible, preferably early in +boot. + +Usage: + keyctl add encrypted name "new key-type:master-key-name keylen" ring + keyctl add encrypted name "load hex_blob" ring + keyctl update keyid "update key-type:master-key-name" + +where 'key-type' is either 'trusted' or 'user'. + +Examples of trusted and encrypted key usage: + +Create and save a trusted key named "kmk" of length 32 bytes: + + $ keyctl add trusted kmk "new 32" @u + 440502848 + + $ keyctl show + Session Keyring + -3 --alswrv 500 500 keyring: _ses + 97833714 --alswrv 500 -1 \_ keyring: _uid.500 + 440502848 --alswrv 500 500 \_ trusted: kmk + + $ keyctl print 440502848 + 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 + 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b + 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 + a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec + d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d + dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 + f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b + e4a8aea2b607ec96931e6f4d4fe563ba + + $ keyctl pipe 440502848 > kmk.blob + +Load a trusted key from the saved blob: + + $ keyctl add trusted kmk "load `cat kmk.blob`" @u + 268728824 + + $ keyctl print 268728824 + 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 + 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b + 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 + a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec + d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d + dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 + f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b + e4a8aea2b607ec96931e6f4d4fe563ba + +Reseal a trusted key under new pcr values: + + $ keyctl update 268728824 "update pcrinfo=`cat pcr.blob`" + $ keyctl print 268728824 + 010100000000002c0002800093c35a09b70fff26e7a98ae786c641e678ec6ffb6b46d805 + 77c8a6377aed9d3219c6dfec4b23ffe3000001005d37d472ac8a44023fbb3d18583a4f73 + d3a076c0858f6f1dcaa39ea0f119911ff03f5406df4f7f27f41da8d7194f45c9f4e00f2e + df449f266253aa3f52e55c53de147773e00f0f9aca86c64d94c95382265968c354c5eab4 + 9638c5ae99c89de1e0997242edfb0b501744e11ff9762dfd951cffd93227cc513384e7e6 + e782c29435c7ec2edafaa2f4c1fe6e7a781b59549ff5296371b42133777dcc5b8b971610 + 94bc67ede19e43ddb9dc2baacad374a36feaf0314d700af0a65c164b7082401740e489c9 + 7ef6a24defe4846104209bf0c3eced7fa1a672ed5b125fc9d8cd88b476a658a4434644ef + df8ae9a178e9f83ba9f08d10fa47e4226b98b0702f06b3b8 + +Create and save an encrypted key "evm" using the above trusted key "kmk": + + $ keyctl add encrypted evm "new trusted:kmk 32" @u + 159771175 + + $ keyctl print 159771175 + trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382dbbc55 + be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e024717c64 + 5972dcb82ab2dde83376d82b2e3c09ffc + + $ keyctl pipe 159771175 > evm.blob + +Load an encrypted key "evm" from saved blob: + + $ keyctl add encrypted evm "load `cat evm.blob`" @u + 831684262 + + $ keyctl print 831684262 + trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382dbbc55 + be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e024717c64 + 5972dcb82ab2dde83376d82b2e3c09ffc + + +The initial consumer of trusted keys is EVM, which at boot time needs a high +quality symmetric key for HMAC protection of file metadata. The use of a +trusted key provides strong guarantees that the EVM key has not been +compromised by a user level problem, and when sealed to specific boot PCR +values, protects against boot and offline attacks. Other uses for trusted and +encrypted keys, such as for disk and file encryption are anticipated. diff --git a/Documentation/make/headers_install.txt b/Documentation/make/headers_install.txt index f2481cabffcb..951eb9f1e040 100644 --- a/Documentation/make/headers_install.txt +++ b/Documentation/make/headers_install.txt @@ -39,8 +39,9 @@ INSTALL_HDR_PATH indicates where to install the headers. It defaults to The command "make headers_install_all" exports headers for all architectures simultaneously. (This is mostly of interest to distribution maintainers, who create an architecture-independent tarball from the resulting include -directory.) Remember to provide the appropriate linux/asm directory via "mv" -or "ln -s" before building a C library with headers exported this way. +directory.) You also can use HDR_ARCH_LIST to specify list of architectures. +Remember to provide the appropriate linux/asm directory via "mv" or "ln -s" +before building a C library with headers exported this way. The kernel header export infrastructure is maintained by David Woodhouse <dwmw2@infradead.org>. diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/LICENSE.qlcnic new file mode 100644 index 000000000000..29ad4b106420 --- /dev/null +++ b/Documentation/networking/LICENSE.qlcnic @@ -0,0 +1,327 @@ +Copyright (c) 2009-2010 QLogic Corporation +QLogic Linux qlcnic NIC Driver + +This program includes a device driver for Linux 2.6 that may be +distributed with QLogic hardware specific firmware binary file. +You may modify and redistribute the device driver code under the +GNU General Public License (a copy of which is attached hereto as +Exhibit A) published by the Free Software Foundation (version 2). + +You may redistribute the hardware specific firmware binary file +under the following terms: + + 1. Redistribution of source code (only if applicable), + must retain the above copyright notice, this list of + conditions and the following disclaimer. + + 2. Redistribution in binary form must reproduce the above + copyright notice, this list of conditions and the + following disclaimer in the documentation and/or other + materials provided with the distribution. + + 3. The name of QLogic Corporation may not be used to + endorse or promote products derived from this software + without specific prior written permission + +REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, +THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY +EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED +TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT +CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR +OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, +TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN +ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN +COMBINATION WITH THIS PROGRAM. + + +EXHIBIT A + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Lesser General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt new file mode 100644 index 000000000000..77f0cdd5b0dd --- /dev/null +++ b/Documentation/networking/batman-adv.txt @@ -0,0 +1,240 @@ +[state: 21-11-2010] + +BATMAN-ADV +---------- + +Batman advanced is a new approach to wireless networking which +does no longer operate on the IP basis. Unlike the batman daemon, +which exchanges information using UDP packets and sets routing +tables, batman-advanced operates on ISO/OSI Layer 2 only and uses +and routes (or better: bridges) Ethernet Frames. It emulates a +virtual network switch of all nodes participating. Therefore all +nodes appear to be link local, thus all higher operating proto- +cols won't be affected by any changes within the network. You can +run almost any protocol above batman advanced, prominent examples +are: IPv4, IPv6, DHCP, IPX. + +Batman advanced was implemented as a Linux kernel driver to re- +duce the overhead to a minimum. It does not depend on any (other) +network driver, and can be used on wifi as well as ethernet lan, +vpn, etc ... (anything with ethernet-style layer 2). + +CONFIGURATION +------------- + +Load the batman-adv module into your kernel: + +# insmod batman-adv.ko + +The module is now waiting for activation. You must add some in- +terfaces on which batman can operate. After loading the module +batman advanced will scan your systems interfaces to search for +compatible interfaces. Once found, it will create subfolders in +the /sys directories of each supported interface, e.g. + +# ls /sys/class/net/eth0/batman_adv/ +# iface_status mesh_iface + +If an interface does not have the "batman_adv" subfolder it prob- +ably is not supported. Not supported interfaces are: loopback, +non-ethernet and batman's own interfaces. + +Note: After the module was loaded it will continuously watch for +new interfaces to verify the compatibility. There is no need to +reload the module if you plug your USB wifi adapter into your ma- +chine after batman advanced was initially loaded. + +To activate a given interface simply write "bat0" into its +"mesh_iface" file inside the batman_adv subfolder: + +# echo bat0 > /sys/class/net/eth0/batman_adv/mesh_iface + +Repeat this step for all interfaces you wish to add. Now batman +starts using/broadcasting on this/these interface(s). + +By reading the "iface_status" file you can check its status: + +# cat /sys/class/net/eth0/batman_adv/iface_status +# active + +To deactivate an interface you have to write "none" into its +"mesh_iface" file: + +# echo none > /sys/class/net/eth0/batman_adv/mesh_iface + + +All mesh wide settings can be found in batman's own interface +folder: + +# ls /sys/class/net/bat0/mesh/ +# aggregated_ogms bonding fragmentation orig_interval +# vis_mode + + +There is a special folder for debugging informations: + +# ls /sys/kernel/debug/batman_adv/bat0/ +# originators socket transtable_global transtable_local +# vis_data + + +Some of the files contain all sort of status information regard- +ing the mesh network. For example, you can view the table of +originators (mesh participants) with: + +# cat /sys/kernel/debug/batman_adv/bat0/originators + +Other files allow to change batman's behaviour to better fit your +requirements. For instance, you can check the current originator +interval (value in milliseconds which determines how often batman +sends its broadcast packets): + +# cat /sys/class/net/bat0/mesh/orig_interval +# 1000 + +and also change its value: + +# echo 3000 > /sys/class/net/bat0/mesh/orig_interval + +In very mobile scenarios, you might want to adjust the originator +interval to a lower value. This will make the mesh more respon- +sive to topology changes, but will also increase the overhead. + + +USAGE +----- + +To make use of your newly created mesh, batman advanced provides +a new interface "bat0" which you should use from this point on. +All interfaces added to batman advanced are not relevant any +longer because batman handles them for you. Basically, one "hands +over" the data by using the batman interface and batman will make +sure it reaches its destination. + +The "bat0" interface can be used like any other regular inter- +face. It needs an IP address which can be either statically con- +figured or dynamically (by using DHCP or similar services): + +# NodeA: ifconfig bat0 192.168.0.1 +# NodeB: ifconfig bat0 192.168.0.2 +# NodeB: ping 192.168.0.1 + +Note: In order to avoid problems remove all IP addresses previ- +ously assigned to interfaces now used by batman advanced, e.g. + +# ifconfig eth0 0.0.0.0 + + +VISUALIZATION +------------- + +If you want topology visualization, at least one mesh node must +be configured as VIS-server: + +# echo "server" > /sys/class/net/bat0/mesh/vis_mode + +Each node is either configured as "server" or as "client" (de- +fault: "client"). Clients send their topology data to the server +next to them, and server synchronize with other servers. If there +is no server configured (default) within the mesh, no topology +information will be transmitted. With these "synchronizing +servers", there can be 1 or more vis servers sharing the same (or +at least very similar) data. + +When configured as server, you can get a topology snapshot of +your mesh: + +# cat /sys/kernel/debug/batman_adv/bat0/vis_data + +This raw output is intended to be easily parsable and convertable +with other tools. Have a look at the batctl README if you want a +vis output in dot or json format for instance and how those out- +puts could then be visualised in an image. + +The raw format consists of comma separated values per entry where +each entry is giving information about a certain source inter- +face. Each entry can/has to have the following values: +-> "mac" - mac address of an originator's source interface + (each line begins with it) +-> "TQ mac value" - src mac's link quality towards mac address + of a neighbor originator's interface which + is being used for routing +-> "HNA mac" - HNA announced by source mac +-> "PRIMARY" - this is a primary interface +-> "SEC mac" - secondary mac address of source + (requires preceding PRIMARY) + +The TQ value has a range from 4 to 255 with 255 being the best. +The HNA entries are showing which hosts are connected to the mesh +via bat0 or being bridged into the mesh network. The PRIMARY/SEC +values are only applied on primary interfaces + + +LOGGING/DEBUGGING +----------------- + +All error messages, warnings and information messages are sent to +the kernel log. Depending on your operating system distribution +this can be read in one of a number of ways. Try using the com- +mands: dmesg, logread, or looking in the files /var/log/kern.log +or /var/log/syslog. All batman-adv messages are prefixed with +"batman-adv:" So to see just these messages try + +# dmesg | grep batman-adv + +When investigating problems with your mesh network it is some- +times necessary to see more detail debug messages. This must be +enabled when compiling the batman-adv module. When building bat- +man-adv as part of kernel, use "make menuconfig" and enable the +option "B.A.T.M.A.N. debugging". + +Those additional debug messages can be accessed using a special +file in debugfs + +# cat /sys/kernel/debug/batman_adv/bat0/log + +The additional debug output is by default disabled. It can be en- +abled during run time. Following log_levels are defined: + +0 - All debug output disabled +1 - Enable messages related to routing / flooding / broadcasting +2 - Enable route or hna added / changed / deleted +3 - Enable all messages + +The debug output can be changed at runtime using the file +/sys/class/net/bat0/mesh/log_level. e.g. + +# echo 2 > /sys/class/net/bat0/mesh/log_level + +will enable debug messages for when routes or HNAs change. + + +BATCTL +------ + +As batman advanced operates on layer 2 all hosts participating in +the virtual switch are completely transparent for all protocols +above layer 2. Therefore the common diagnosis tools do not work +as expected. To overcome these problems batctl was created. At +the moment the batctl contains ping, traceroute, tcpdump and +interfaces to the kernel module settings. + +For more information, please see the manpage (man batctl). + +batctl is available on http://www.open-mesh.org/ + + +CONTACT +------- + +Please send us comments, experiences, questions, anything :) + +IRC: #batman on irc.freenode.org +Mailing-list: b.a.t.m.a.n@b.a.t.m.a.n@lists.open-mesh.org + (optional subscription at + https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n) + +You can also contact the Authors: + +Marek Lindner <lindner_marek@yahoo.de> +Simon Wunderlich <siwu@hrz.tu-chemnitz.de> diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt index 271d524a4c8d..b395ca6a49f2 100644 --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -47,6 +47,26 @@ http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree Socket options ============== +DCCP_SOCKOPT_QPOLICY_ID sets the dequeuing policy for outgoing packets. It takes +a policy ID as argument and can only be set before the connection (i.e. changes +during an established connection are not supported). Currently, two policies are +defined: the "simple" policy (DCCPQ_POLICY_SIMPLE), which does nothing special, +and a priority-based variant (DCCPQ_POLICY_PRIO). The latter allows to pass an +u32 priority value as ancillary data to sendmsg(), where higher numbers indicate +a higher packet priority (similar to SO_PRIORITY). This ancillary data needs to +be formatted using a cmsg(3) message header filled in as follows: + cmsg->cmsg_level = SOL_DCCP; + cmsg->cmsg_type = DCCP_SCM_PRIORITY; + cmsg->cmsg_len = CMSG_LEN(sizeof(uint32_t)); /* or CMSG_LEN(4) */ + +DCCP_SOCKOPT_QPOLICY_TXQLEN sets the maximum length of the output queue. A zero +value is always interpreted as unbounded queue length. If different from zero, +the interpretation of this parameter depends on the current dequeuing policy +(see above): the "simple" policy will enforce a fixed queue size by returning +EAGAIN, whereas the "prio" policy enforces a fixed queue length by dropping the +lowest-priority packet first. The default value for this parameter is +initialised from /proc/sys/net/dccp/default/tx_qlen. + DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of service codes (RFC 4340, sec. 8.1.2); if this socket option is not set, the socket will fall back to 0 (which means that no meaningful service code diff --git a/Documentation/networking/e100.txt b/Documentation/networking/e100.txt index 944aa55e79f8..162f323a7a1f 100644 --- a/Documentation/networking/e100.txt +++ b/Documentation/networking/e100.txt @@ -72,7 +72,7 @@ Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data ethtool -G eth? tx n, where n is the number of desired tx descriptors. Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by - default. Ethtool can be used as follows to force speed/duplex. + default. The ethtool utility can be used as follows to force speed/duplex. ethtool -s eth? autoneg off speed {10|100} duplex {full|half} @@ -126,30 +126,21 @@ Additional Configurations ------- The driver utilizes the ethtool interface for driver configuration and - diagnostics, as well as displaying statistical information. Ethtool + diagnostics, as well as displaying statistical information. The ethtool version 1.6 or later is required for this functionality. The latest release of ethtool can be found from - http://sourceforge.net/projects/gkernel. - - NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support - for a more complete ethtool feature set can be enabled by upgrading - ethtool to ethtool-1.8.1. - + http://ftp.kernel.org/pub/software/network/ethtool/ Enabling Wake on LAN* (WoL) --------------------------- - WoL is provided through the Ethtool* utility. Ethtool is included with Red - Hat* 8.0. For other Linux distributions, download and install Ethtool from - the following website: http://sourceforge.net/projects/gkernel. - - For instructions on enabling WoL with Ethtool, refer to the Ethtool man page. + WoL is provided through the ethtool* utility. For instructions on enabling + WoL with ethtool, refer to the ethtool man page. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the e100 driver must be loaded when shutting down or rebooting the system. - NAPI ---- diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt index d9271e74e488..71ca95855671 100644 --- a/Documentation/networking/e1000.txt +++ b/Documentation/networking/e1000.txt @@ -79,7 +79,7 @@ InterruptThrottleRate --------------------- (not supported on Intel(R) 82542, 82543 or 82544-based adapters) Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, - 4=simplified balancing) + 4=simplified balancing) Default Value: 3 The driver can limit the amount of interrupts per second that the adapter @@ -124,8 +124,8 @@ InterruptThrottleRate is set to mode 1. In this mode, which operates the same as mode 3, the InterruptThrottleRate will be increased stepwise to 70000 for traffic in class "Lowest latency". -In simplified mode the interrupt rate is based on the ratio of Tx and -Rx traffic. If the bytes per second rate is approximately equal, the +In simplified mode the interrupt rate is based on the ratio of TX and +RX traffic. If the bytes per second rate is approximately equal, the interrupt rate will drop as low as 2000 interrupts per second. If the traffic is mostly transmit or mostly receive, the interrupt rate could be as high as 8000. @@ -245,7 +245,7 @@ NOTE: Depending on the available system resources, the request for a TxDescriptorStep ---------------- Valid Range: 1 (use every Tx Descriptor) - 4 (use every 4th Tx Descriptor) + 4 (use every 4th Tx Descriptor) Default Value: 1 (use every Tx Descriptor) @@ -312,7 +312,7 @@ Valid Range: 0-xxxxxxx (0=off) Default Value: 256 Usage: insmod e1000.ko copybreak=128 -Driver copies all packets below or equaling this size to a fresh Rx +Driver copies all packets below or equaling this size to a fresh RX buffer before handing it up the stack. This parameter is different than other parameters, in that it is a @@ -431,15 +431,15 @@ Additional Configurations Ethtool ------- The driver utilizes the ethtool interface for driver configuration and - diagnostics, as well as displaying statistical information. Ethtool + diagnostics, as well as displaying statistical information. The ethtool version 1.6 or later is required for this functionality. The latest release of ethtool can be found from - http://sourceforge.net/projects/gkernel. + http://ftp.kernel.org/pub/software/network/ethtool/ Enabling Wake on LAN* (WoL) --------------------------- - WoL is configured through the Ethtool* utility. + WoL is configured through the ethtool* utility. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the e1000 driver must be diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt index 6aa048badf32..97b5ba942ebf 100644 --- a/Documentation/networking/e1000e.txt +++ b/Documentation/networking/e1000e.txt @@ -1,5 +1,5 @@ Linux* Driver for Intel(R) Network Connection -=============================================================== +============================================= Intel Gigabit Linux driver. Copyright(c) 1999 - 2010 Intel Corporation. @@ -61,6 +61,12 @@ per second, even if more packets have come in. This reduces interrupt load on the system and can lower CPU utilization under heavy load, but will increase latency as packets are not processed as quickly. +The default behaviour of the driver previously assumed a static +InterruptThrottleRate value of 8000, providing a good fallback value for +all traffic types, but lacking in small packet performance and latency. +The hardware can handle many more small packets per second however, and +for this reason an adaptive interrupt moderation algorithm was implemented. + The driver has two adaptive modes (setting 1 or 3) in which it dynamically adjusts the InterruptThrottleRate value based on the traffic that it receives. After determining the type of incoming traffic in the last @@ -86,8 +92,8 @@ InterruptThrottleRate is set to mode 1. In this mode, which operates the same as mode 3, the InterruptThrottleRate will be increased stepwise to 70000 for traffic in class "Lowest latency". -In simplified mode the interrupt rate is based on the ratio of Tx and -Rx traffic. If the bytes per second rate is approximately equal the +In simplified mode the interrupt rate is based on the ratio of TX and +RX traffic. If the bytes per second rate is approximately equal, the interrupt rate will drop as low as 2000 interrupts per second. If the traffic is mostly transmit or mostly receive, the interrupt rate could be as high as 8000. @@ -177,7 +183,7 @@ Copybreak Valid Range: 0-xxxxxxx (0=off) Default Value: 256 -Driver copies all packets below or equaling this size to a fresh Rx +Driver copies all packets below or equaling this size to a fresh RX buffer before handing it up the stack. This parameter is different than other parameters, in that it is a @@ -223,17 +229,17 @@ loading or enabling the driver, try disabling this feature. WriteProtectNVM --------------- -Valid Range: 0-1 -Default Value: 1 (enabled) - -Set the hardware to ignore all write/erase cycles to the GbE region in the -ICHx NVM (non-volatile memory). This feature can be disabled by the -WriteProtectNVM module parameter (enabled by default) only after a hardware -reset, but the machine must be power cycled before trying to enable writes. - -Note: the kernel boot option iomem=relaxed may need to be set if the kernel -config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the -NVM from user space via ethtool. +Valid Range: 0,1 +Default Value: 1 + +If set to 1, configure the hardware to ignore all write/erase cycles to the +GbE region in the ICHx NVM (in order to prevent accidental corruption of the +NVM). This feature can be disabled by setting the parameter to 0 during initial +driver load. +NOTE: The machine must be power cycled (full off/on) when enabling NVM writes +via setting the parameter to zero. Once the NVM has been locked (via the +parameter at 1 when the driver loads) it cannot be unlocked except via power +cycle. Additional Configurations ========================= @@ -259,32 +265,30 @@ Additional Configurations - Some adapters limit Jumbo Frames sized packets to a maximum of 4096 bytes and some adapters do not support Jumbo Frames. - Ethtool ------- The driver utilizes the ethtool interface for driver configuration and diagnostics, as well as displaying statistical information. We - strongly recommend downloading the latest version of Ethtool at: + strongly recommend downloading the latest version of ethtool at: - http://sourceforge.net/projects/gkernel. + http://ftp.kernel.org/pub/software/network/ethtool/ Speed and Duplex ---------------- - Speed and Duplex are configured through the Ethtool* utility. For - instructions, refer to the Ethtool man page. + Speed and Duplex are configured through the ethtool* utility. For + instructions, refer to the ethtool man page. Enabling Wake on LAN* (WoL) --------------------------- - WoL is configured through the Ethtool* utility. For instructions on - enabling WoL with Ethtool, refer to the Ethtool man page. + WoL is configured through the ethtool* utility. For instructions on + enabling WoL with ethtool, refer to the ethtool man page. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the e1000e driver must be loaded when shutting down or rebooting the system. In most cases Wake On LAN is only supported on port A for multiple port - adapters. To verify if a port supports Wake on LAN run ethtool eth<X>. - + adapters. To verify if a port supports Wake on Lan run ethtool eth<X>. Support ======= diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt index ab2d71831892..98953c0d5342 100644 --- a/Documentation/networking/igb.txt +++ b/Documentation/networking/igb.txt @@ -36,6 +36,7 @@ Default Value: 0 This parameter adds support for SR-IOV. It causes the driver to spawn up to max_vfs worth of virtual function. + Additional Configurations ========================= @@ -60,15 +61,16 @@ Additional Configurations Ethtool ------- The driver utilizes the ethtool interface for driver configuration and - diagnostics, as well as displaying statistical information. + diagnostics, as well as displaying statistical information. The latest + version of ethtool can be found at: - http://sourceforge.net/projects/gkernel. + http://ftp.kernel.org/pub/software/network/ethtool/ Enabling Wake on LAN* (WoL) --------------------------- - WoL is configured through the Ethtool* utility. + WoL is configured through the ethtool* utility. - For instructions on enabling WoL with Ethtool, refer to the Ethtool man page. + For instructions on enabling WoL with ethtool, refer to the ethtool man page. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the igb driver must be @@ -91,31 +93,6 @@ Additional Configurations REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not found, the system will fallback to MSI or to Legacy interrupts. - LRO - --- - Large Receive Offload (LRO) is a technique for increasing inbound throughput - of high-bandwidth network connections by reducing CPU overhead. It works by - aggregating multiple incoming packets from a single stream into a larger - buffer before they are passed higher up the networking stack, thus reducing - the number of packets that have to be processed. LRO combines multiple - Ethernet frames into a single receive in the stack, thereby potentially - decreasing CPU utilization for receives. - - NOTE: You need to have inet_lro enabled via either the CONFIG_INET_LRO or - CONFIG_INET_LRO_MODULE kernel config option. Additionally, if - CONFIG_INET_LRO_MODULE is used, the inet_lro module needs to be loaded - before the igb driver. - - You can verify that the driver is using LRO by looking at these counters in - Ethtool: - - lro_aggregated - count of total packets that were combined - lro_flushed - counts the number of packets flushed out of LRO - lro_no_desc - counts the number of times an LRO descriptor was not available - for the LRO packet - - NOTE: IPv6 and UDP are not supported by LRO. - Support ======= diff --git a/Documentation/networking/igbvf.txt b/Documentation/networking/igbvf.txt index 056028138d9c..cbfe4ee65533 100644 --- a/Documentation/networking/igbvf.txt +++ b/Documentation/networking/igbvf.txt @@ -58,9 +58,11 @@ Additional Configurations Ethtool ------- The driver utilizes the ethtool interface for driver configuration and - diagnostics, as well as displaying statistical information. + diagnostics, as well as displaying statistical information. The ethtool + version 3.0 or later is required for this functionality, although we + strongly recommend downloading the latest version at: - http://sourceforge.net/projects/gkernel. + http://ftp.kernel.org/pub/software/network/ethtool/ Support ======= diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 3c5e465296e1..d99940dcfc44 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -11,7 +11,9 @@ ip_forward - BOOLEAN for routers) ip_default_ttl - INTEGER - default 64 + Default value of TTL field (Time To Live) for outgoing (but not + forwarded) IP packets. Should be between 1 and 255 inclusive. + Default: 64 (as recommended by RFC1700) ip_no_pmtu_disc - BOOLEAN Disable Path MTU Discovery. @@ -708,10 +710,28 @@ igmp_max_memberships - INTEGER Change the maximum number of multicast groups we can subscribe to. Default: 20 -conf/interface/* changes special settings per interface (where "interface" is - the name of your network interface) -conf/all/* is special, changes the settings for all interfaces + Theoretical maximum value is bounded by having to send a membership + report in a single datagram (i.e. the report can't span multiple + datagrams, or risk confusing the switch and leaving groups you don't + intend to). + The number of supported groups 'M' is bounded by the number of group + report entries you can fit into a single datagram of 65535 bytes. + + M = 65536-sizeof (ip header)/(sizeof(Group record)) + + Group records are variable length, with a minimum of 12 bytes. + So net.ipv4.igmp_max_memberships should not be set higher than: + + (65536-24) / 12 = 5459 + + The value 5459 assumes no IP header options, so in practice + this number may be lower. + + conf/interface/* changes special settings per interface (where + "interface" is the name of your network interface) + + conf/all/* is special, changes the settings for all interfaces log_martians - BOOLEAN Log packets with impossible addresses to kernel log. diff --git a/Documentation/networking/ixgb.txt b/Documentation/networking/ixgb.txt index a0d0ffb5e584..e196f16df313 100644 --- a/Documentation/networking/ixgb.txt +++ b/Documentation/networking/ixgb.txt @@ -309,15 +309,15 @@ Additional Configurations Ethtool ------- The driver utilizes the ethtool interface for driver configuration and - diagnostics, as well as displaying statistical information. Ethtool + diagnostics, as well as displaying statistical information. The ethtool version 1.6 or later is required for this functionality. The latest release of ethtool can be found from - http://sourceforge.net/projects/gkernel + http://ftp.kernel.org/pub/software/network/ethtool/ - NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support - for a more complete ethtool feature set can be enabled by upgrading - to the latest version. + NOTE: The ethtool version 1.6 only supports a limited set of ethtool options. + Support for a more complete ethtool feature set can be enabled by + upgrading to the latest version. NAPI diff --git a/Documentation/networking/ixgbe.txt b/Documentation/networking/ixgbe.txt index eeb68685c788..af77ed3c4172 100644 --- a/Documentation/networking/ixgbe.txt +++ b/Documentation/networking/ixgbe.txt @@ -1,107 +1,126 @@ Linux Base Driver for 10 Gigabit PCI Express Intel(R) Network Connection ======================================================================== -March 10, 2009 - +Intel Gigabit Linux driver. +Copyright(c) 1999 - 2010 Intel Corporation. Contents ======== -- In This Release - Identifying Your Adapter -- Building and Installation - Additional Configurations +- Performance Tuning +- Known Issues - Support +Identifying Your Adapter +======================== +The driver in this release is compatible with 82598 and 82599-based Intel +Network Connections. -In This Release -=============== +For more information on how to identify your adapter, go to the Adapter & +Driver ID Guide at: -This file describes the ixgbe Linux Base Driver for the 10 Gigabit PCI -Express Intel(R) Network Connection. This driver includes support for -Itanium(R)2-based systems. + http://support.intel.com/support/network/sb/CS-012904.htm -For questions related to hardware requirements, refer to the documentation -supplied with your 10 Gigabit adapter. All hardware requirements listed apply -to use with Linux. +SFP+ Devices with Pluggable Optics +---------------------------------- -The following features are available in this kernel: - - Native VLANs - - Channel Bonding (teaming) - - SNMP - - Generic Receive Offload - - Data Center Bridging +82599-BASED ADAPTERS -Channel Bonding documentation can be found in the Linux kernel source: -/Documentation/networking/bonding.txt +NOTES: If your 82599-based Intel(R) Network Adapter came with Intel optics, or +is an Intel(R) Ethernet Server Adapter X520-2, then it only supports Intel +optics and/or the direct attach cables listed below. -Ethtool, lspci, and ifconfig can be used to display device and driver -specific information. +When 82599-based SFP+ devices are connected back to back, they should be set to +the same Speed setting via ethtool. Results may vary if you mix speed settings. +82598-based adapters support all passive direct attach cables that comply +with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach +cables are not supported. +Supplier Type Part Numbers -Identifying Your Adapter -======================== +SR Modules +Intel DUAL RATE 1G/10G SFP+ SR (bailed) FTLX8571D3BCV-IT +Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDDZ-IN1 +Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDZ-IN2 +LR Modules +Intel DUAL RATE 1G/10G SFP+ LR (bailed) FTLX1471D3BCV-IT +Intel DUAL RATE 1G/10G SFP+ LR (bailed) AFCT-701SDDZ-IN1 +Intel DUAL RATE 1G/10G SFP+ LR (bailed) AFCT-701SDZ-IN2 -This driver supports devices based on the 82598 controller and the 82599 -controller. +The following is a list of 3rd party SFP+ modules and direct attach cables that +have received some testing. Not all modules are applicable to all devices. -For specific information on identifying which adapter you have, please visit: +Supplier Type Part Numbers - http://support.intel.com/support/network/sb/CS-008441.htm +Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL +Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ +Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL +Finisar DUAL RATE 1G/10G SFP+ SR (No Bail) FTLX8571D3QCV-IT +Avago DUAL RATE 1G/10G SFP+ SR (No Bail) AFBR-703SDZ-IN1 +Finisar DUAL RATE 1G/10G SFP+ LR (No Bail) FTLX1471D3QCV-IT +Avago DUAL RATE 1G/10G SFP+ LR (No Bail) AFCT-701SDZ-IN1 +Finistar 1000BASE-T SFP FCLF8522P2BTL +Avago 1000BASE-T SFP ABCU-5710RZ -Building and Installation -========================= +82599-based adapters support all passive and active limiting direct attach +cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. -select m for "Intel(R) 10GbE PCI Express adapters support" located at: - Location: - -> Device Drivers - -> Network device support (NETDEVICES [=y]) - -> Ethernet (10000 Mbit) (NETDEV_10000 [=y]) +Laser turns off for SFP+ when ifconfig down +------------------------------------------- +"ifconfig down" turns off the laser for 82599-based SFP+ fiber adapters. +"ifconfig up" turns on the later. -1. make modules & make modules_install -2. Load the module: +82598-BASED ADAPTERS -# modprobe ixgbe +NOTES for 82598-Based Adapters: +- Intel(R) Network Adapters that support removable optical modules only support + their original module type (i.e., the Intel(R) 10 Gigabit SR Dual Port + Express Module only supports SR optical modules). If you plug in a different + type of module, the driver will not load. +- Hot Swapping/hot plugging optical modules is not supported. +- Only single speed, 10 gigabit modules are supported. +- LAN on Motherboard (LOMs) may support DA, SR, or LR modules. Other module + types are not supported. Please see your system documentation for details. - The insmod command can be used if the full - path to the driver module is specified. For example: +The following is a list of 3rd party SFP+ modules and direct attach cables that +have received some testing. Not all modules are applicable to all devices. - insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ixgbe/ixgbe.ko +Supplier Type Part Numbers - With 2.6 based kernels also make sure that older ixgbe drivers are - removed from the kernel, before loading the new module: +Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL +Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ +Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL - rmmod ixgbe; modprobe ixgbe +82598-based adapters support all passive direct attach cables that comply +with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach +cables are not supported. -3. Assign an IP address to the interface by entering the following, where - x is the interface number: - ifconfig ethx <IP_address> +Flow Control +------------ +Ethernet Flow Control (IEEE 802.3x) can be configured with ethtool to enable +receiving and transmitting pause frames for ixgbe. When TX is enabled, PAUSE +frames are generated when the receive packet buffer crosses a predefined +threshold. When rx is enabled, the transmit unit will halt for the time delay +specified when a PAUSE frame is received. -4. Verify that the interface works. Enter the following, where <IP_address> - is the IP address for another machine on the same subnet as the interface - that is being tested: +Flow Control is enabled by default. If you want to disable a flow control +capable link partner, use ethtool: - ping <IP_address> + ethtool -A eth? autoneg off RX off TX off +NOTE: For 82598 backplane cards entering 1 gig mode, flow control default +behavior is changed to off. Flow control in 1 gig mode on these devices can +lead to Tx hangs. Additional Configurations ========================= - Viewing Link Messages - --------------------- - Link messages will not be displayed to the console if the distribution is - restricting system messages. In order to see network driver link messages on - your console, set dmesg to eight by entering the following: - - dmesg -n 8 - - NOTE: This setting is not saved across reboots. - - Jumbo Frames ------------ The driver supports Jumbo Frames for all adapters. Jumbo Frames support is @@ -123,13 +142,8 @@ Additional Configurations other protocols besides TCP. It's also safe to use with configurations that are problematic for LRO, namely bridging and iSCSI. - GRO is enabled by default in the driver. Future versions of ethtool will - support disabling and re-enabling GRO on the fly. - - Data Center Bridging, aka DCB ----------------------------- - DCB is a configuration Quality of Service implementation in hardware. It uses the VLAN priority tag (802.1p) to filter traffic. That means that there are 8 different priorities that traffic can be filtered into. @@ -163,24 +177,71 @@ Additional Configurations http://e1000.sf.net - Ethtool ------- The driver utilizes the ethtool interface for driver configuration and - diagnostics, as well as displaying statistical information. Ethtool - version 3.0 or later is required for this functionality. + diagnostics, as well as displaying statistical information. The latest + ethtool version is required for this functionality. The latest release of ethtool can be found from - http://sourceforge.net/projects/gkernel. + http://ftp.kernel.org/pub/software/network/ethtool/ - - NAPI + FCoE ---- + This release of the ixgbe driver contains new code to enable users to use + Fiber Channel over Ethernet (FCoE) and Data Center Bridging (DCB) + functionality that is supported by the 82598-based hardware. This code has + no default effect on the regular driver operation, and configuring DCB and + FCoE is outside the scope of this driver README. Refer to + http://www.open-fcoe.org/ for FCoE project information and contact + e1000-eedc@lists.sourceforge.net for DCB information. + + MAC and VLAN anti-spoofing feature + ---------------------------------- + When a malicious driver attempts to send a spoofed packet, it is dropped by + the hardware and not transmitted. An interrupt is sent to the PF driver + notifying it of the spoof attempt. + + When a spoofed packet is detected the PF driver will send the following + message to the system log (displayed by the "dmesg" command): + + Spoof event(s) detected on VF (n) + + Where n=the VF that attempted to do the spoofing. + + +Performance Tuning +================== + +An excellent article on performance tuning can be found at: + +http://www.redhat.com/promo/summit/2008/downloads/pdf/Thursday/Mark_Wagner.pdf + + +Known Issues +============ + + Enabling SR-IOV in a 32-bit Microsoft* Windows* Server 2008 Guest OS using + Intel (R) 82576-based GbE or Intel (R) 82599-based 10GbE controller under KVM + ----------------------------------------------------------------------------- + KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This + includes traditional PCIe devices, as well as SR-IOV-capable devices using + Intel 82576-based and 82599-based controllers. + + While direct assignment of a PCIe device or an SR-IOV Virtual Function (VF) + to a Linux-based VM running 2.6.32 or later kernel works fine, there is a + known issue with Microsoft Windows Server 2008 VM that results in a "yellow + bang" error. This problem is within the KVM VMM itself, not the Intel driver, + or the SR-IOV logic of the VMM, but rather that KVM emulates an older CPU + model for the guests, and this older CPU model does not support MSI-X + interrupts, which is a requirement for Intel SR-IOV. - NAPI (Rx polling mode) is supported in the ixgbe driver. NAPI is enabled - by default in the driver. + If you wish to use the Intel 82576 or 82599-based controllers in SR-IOV mode + with KVM and a Microsoft Windows Server 2008 guest try the following + workaround. The workaround is to tell KVM to emulate a different model of CPU + when using qemu to create the KVM guest: - See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI. + "-cpu qemu64,model=13" Support diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt index 21dd5d15b6b4..5a91a41fa946 100644 --- a/Documentation/networking/ixgbevf.txt +++ b/Documentation/networking/ixgbevf.txt @@ -35,10 +35,6 @@ Driver ID Guide at: Known Issues/Troubleshooting ============================ - Unloading Physical Function (PF) Driver Causes System Reboots When VM is - Running and VF is Loaded on the VM - ------------------------------------------------------------------------ - Do not unload the PF driver (ixgbe) while VFs are assigned to guests. Support ======= diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index 7ee770b5ef5f..80a7a3454902 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -7,7 +7,7 @@ This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers (Synopsys IP blocks); it has been fully tested on STLinux platforms. Currently this network device driver is for all STM embedded MAC/GMAC -(7xxx SoCs). +(7xxx SoCs). Other platforms start using it i.e. ARM SPEAr. DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100 Universal version 4.0 have been used for developing the first code @@ -95,9 +95,14 @@ Several information came from the platform; please refer to the driver's Header file in include/linux directory. struct plat_stmmacenet_data { - int bus_id; - int pbl; - int has_gmac; + int bus_id; + int pbl; + int clk_csr; + int has_gmac; + int enh_desc; + int tx_coe; + int bugged_jumbo; + int pmt; void (*fix_mac_speed)(void *priv, unsigned int speed); void (*bus_setup)(unsigned long ioaddr); #ifdef CONFIG_STM_DRIVERS @@ -114,6 +119,12 @@ Where: registers (on STM platforms); - has_gmac: GMAC core is on board (get it at run-time in the next step); - bus_id: bus identifier. +- tx_coe: core is able to perform the tx csum in HW. +- enh_desc: if sets the MAC will use the enhanced descriptor structure. +- clk_csr: CSR Clock range selection. +- bugged_jumbo: some HWs are not able to perform the csum in HW for + over-sized frames due to limited buffer sizes. Setting this + flag the csum will be done in SW on JUMBO frames. struct plat_stmmacphy_data { int bus_id; @@ -131,13 +142,28 @@ Where: - interface: physical MII interface mode; - phy_reset: hook to reset HW function. +SOURCES: +- Kconfig +- Makefile +- stmmac_main.c: main network device driver; +- stmmac_mdio.c: mdio functions; +- stmmac_ethtool.c: ethtool support; +- stmmac_timer.[ch]: timer code used for mitigating the driver dma interrupts + Only tested on ST40 platforms based. +- stmmac.h: private driver structure; +- common.h: common definitions and VFTs; +- descs.h: descriptor structure definitions; +- dwmac1000_core.c: GMAC core functions; +- dwmac1000_dma.c: dma functions for the GMAC chip; +- dwmac1000.h: specific header file for the GMAC; +- dwmac100_core: MAC 100 core and dma code; +- dwmac100_dma.c: dma funtions for the MAC chip; +- dwmac1000.h: specific header file for the MAC; +- dwmac_lib.c: generic DMA functions shared among chips +- enh_desc.c: functions for handling enhanced descriptors +- norm_desc.c: functions for handling normal descriptors + TODO: -- Continue to make the driver more generic and suitable for other Synopsys - Ethernet controllers used on other architectures (i.e. ARM). -- 10G controllers are not supported. -- MAC uses Normal descriptors and GMAC uses enhanced ones. - This is a limit that should be reviewed. MAC could want to - use the enhanced structure. -- Checksumming: Rx/Tx csum is done in HW in case of GMAC only. +- XGMAC controller is not supported. - Review the timer optimisation code to use an embedded device that seems to be available in new chip generations. diff --git a/Documentation/power/drivers-testing.txt b/Documentation/power/drivers-testing.txt index 7f7a737f7f9f..638afdf4d6b8 100644 --- a/Documentation/power/drivers-testing.txt +++ b/Documentation/power/drivers-testing.txt @@ -23,10 +23,10 @@ Once you have resolved the suspend/resume-related problems with your test system without the new driver, you are ready to test it: a) Build the driver as a module, load it and try the test modes of hibernation - (see: Documents/power/basic-pm-debugging.txt, 1). + (see: Documentation/power/basic-pm-debugging.txt, 1). b) Load the driver and attempt to hibernate in the "reboot", "shutdown" and - "platform" modes (see: Documents/power/basic-pm-debugging.txt, 1). + "platform" modes (see: Documentation/power/basic-pm-debugging.txt, 1). c) Compile the driver directly into the kernel and try the test modes of hibernation. @@ -34,12 +34,12 @@ c) Compile the driver directly into the kernel and try the test modes of d) Attempt to hibernate with the driver compiled directly into the kernel in the "reboot", "shutdown" and "platform" modes. -e) Try the test modes of suspend (see: Documents/power/basic-pm-debugging.txt, +e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.txt, 2). [As far as the STR tests are concerned, it should not matter whether or not the driver is built as a module.] f) Attempt to suspend to RAM using the s2ram tool with the driver loaded - (see: Documents/power/basic-pm-debugging.txt, 2). + (see: Documentation/power/basic-pm-debugging.txt, 2). Each of the above tests should be repeated several times and the STD tests should be mixed with the STR tests. If any of them fails, the driver cannot be diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 41cc7b30d7dd..ffe55ffa540a 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -50,6 +50,15 @@ type's callbacks are not defined) of given device. The bus type, device type and device class callbacks are referred to as subsystem-level callbacks in what follows. +By default, the callbacks are always invoked in process context with interrupts +enabled. However, subsystems can use the pm_runtime_irq_safe() helper function +to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume() +callbacks should be invoked in atomic context with interrupts disabled +(->runtime_idle() is still invoked the default way). This implies that these +callback routines must not block or sleep, but it also means that the +synchronous helper functions listed at the end of Section 4 can be used within +an interrupt handler or in an atomic context. + The subsystem-level suspend callback is _entirely_ _responsible_ for handling the suspend of the device as appropriate, which may, but need not include executing the device driver's own ->runtime_suspend() callback (from the @@ -237,6 +246,10 @@ defined in include/linux/pm.h: Section 8); it may be modified only by the pm_runtime_no_callbacks() helper function + unsigned int irq_safe; + - indicates that the ->runtime_suspend() and ->runtime_resume() callbacks + will be invoked with the spinlock held and interrupts disabled + unsigned int use_autosuspend; - indicates that the device's driver supports delayed autosuspend (see Section 9); it may be modified only by the @@ -344,6 +357,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: - decrement the device's usage counter; if the result is 0 then run pm_runtime_idle(dev) and return its result + int pm_runtime_put_sync_suspend(struct device *dev); + - decrement the device's usage counter; if the result is 0 then run + pm_runtime_suspend(dev) and return its result + int pm_runtime_put_sync_autosuspend(struct device *dev); - decrement the device's usage counter; if the result is 0 then run pm_runtime_autosuspend(dev) and return its result @@ -397,6 +414,11 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: PM attributes from /sys/devices/.../power (or prevent them from being added when the device is registered) + void pm_runtime_irq_safe(struct device *dev); + - set the power.irq_safe flag for the device, causing the runtime-PM + suspend and resume callbacks (but not the idle callback) to be invoked + with interrupts disabled + void pm_runtime_mark_last_busy(struct device *dev); - set the power.last_busy field to the current time @@ -438,6 +460,15 @@ pm_runtime_suspended() pm_runtime_mark_last_busy() pm_runtime_autosuspend_expiration() +If pm_runtime_irq_safe() has been called for a device then the following helper +functions may also be used in interrupt context: + +pm_runtime_suspend() +pm_runtime_autosuspend() +pm_runtime_resume() +pm_runtime_get_sync() +pm_runtime_put_sync_suspend() + 5. Run-time PM Initialization, Device Probing and Removal Initially, the run-time PM is disabled for all devices, which means that the diff --git a/Documentation/powerpc/dts-bindings/eeprom.txt b/Documentation/powerpc/dts-bindings/eeprom.txt new file mode 100644 index 000000000000..4342c10de1bf --- /dev/null +++ b/Documentation/powerpc/dts-bindings/eeprom.txt @@ -0,0 +1,28 @@ +EEPROMs (I2C) + +Required properties: + + - compatible : should be "<manufacturer>,<type>" + If there is no specific driver for <manufacturer>, a generic + driver based on <type> is selected. Possible types are: + 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64, + 24c128, 24c256, 24c512, 24c1024, spd + + - reg : the I2C address of the EEPROM + +Optional properties: + + - pagesize : the length of the pagesize for writing. Please consult the + manual of your device, that value varies a lot. A wrong value + may result in data loss! If not specified, a safety value of + '1' is used which will be very slow. + + - read-only: this parameterless property disables writes to the eeprom + +Example: + +eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; +}; diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 00301ed9c371..b64d10d221ec 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,25 @@ +Release Date : Tues. Dec 14, 2010 17:00:00 PST 2010 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford +Current Version : 00.00.05.29-rc1 +Old Version : 00.00.04.31-rc1 + 1. Rename megaraid_sas.c to megaraid_sas_base.c. + 2. Update GPL headers. + 3. Add MSI-X support and 'msix_disable' module parameter. + 4. Use lowest memory bar (for SR-IOV VF support). + 5. Add struct megasas_instance_temlate changes, and change all code to use + new instance entries: + + irqreturn_t (*service_isr )(int irq, void *devp); + void (*tasklet)(unsigned long); + u32 (*init_adapter)(struct megasas_instance *); + u32 (*build_and_issue_cmd) (struct megasas_instance *, + struct scsi_cmnd *); + void (*issue_dcmd) (struct megasas_instance *instance, + struct megasas_cmd *cmd); + + 6. Add code to support MegaRAID 9265/9285 controllers device id (0x5b). +------------------------------------------------------------------------------- 1 Release Date : Thur. May 03, 2010 09:12:45 PST 2009 - (emaild-id:megaraidlinux@lsi.com) Bo Yang diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX index 07dcdb0d2a36..e09468ad3cb1 100644 --- a/Documentation/serial/00-INDEX +++ b/Documentation/serial/00-INDEX @@ -14,6 +14,8 @@ riscom8.txt - notes on using the RISCom/8 multi-port serial driver. rocket.txt - info on the Comtrol RocketPort multiport serial driver. +serial-rs485.txt + - info about RS485 structures and support in the kernel. specialix.txt - info on hardware/driver for specialix IO8+ multiport serial card. stallion.txt diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt new file mode 100644 index 000000000000..a4932387bbfb --- /dev/null +++ b/Documentation/serial/serial-rs485.txt @@ -0,0 +1,120 @@ + RS485 SERIAL COMMUNICATIONS + +1. INTRODUCTION + + EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the + electrical characteristics of drivers and receivers for use in balanced + digital multipoint systems. + This standard is widely used for communications in industrial automation + because it can be used effectively over long distances and in electrically + noisy environments. + +2. HARDWARE-RELATED CONSIDERATIONS + + Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in + half-duplex mode capable of automatically controlling line direction by + toggling RTS or DTR signals. That can be used to control external + half-duplex hardware like an RS485 transceiver or any RS232-connected + half-duplex devices like some modems. + + For these microcontrollers, the Linux driver should be made capable of + working in both modes, and proper ioctls (see later) should be made + available at user-level to allow switching from one mode to the other, and + vice versa. + +3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL + + The Linux kernel provides the serial_rs485 structure (see [1]) to handle + RS485 communications. This data structure is used to set and configure RS485 + parameters in the platform data and in ioctls. + + Any driver for devices capable of working both as RS232 and RS485 should + provide at least the following ioctls: + + - TIOCSRS485 (typically associated with number 0x542F). This ioctl is used + to enable/disable RS485 mode from user-space + + - TIOCGRS485 (typically associated with number 0x542E). This ioctl is used + to get RS485 mode from kernel-space (i.e., driver) to user-space. + + In other words, the serial driver should contain a code similar to the next + one: + + static struct uart_ops atmel_pops = { + /* ... */ + .ioctl = handle_ioctl, + }; + + static int handle_ioctl(struct uart_port *port, + unsigned int cmd, + unsigned long arg) + { + struct serial_rs485 rs485conf; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485conf, + (struct serial_rs485 *) arg, + sizeof(rs485conf))) + return -EFAULT; + + /* ... */ + break; + + case TIOCGRS485: + if (copy_to_user((struct serial_rs485 *) arg, + ..., + sizeof(rs485conf))) + return -EFAULT; + /* ... */ + break; + + /* ... */ + } + } + + +4. USAGE FROM USER-LEVEL + + From user-level, RS485 configuration can be get/set using the previous + ioctls. For instance, to set RS485 you can use the following code: + + #include <linux/serial.h> + + /* Driver-specific ioctls: */ + #define TIOCGRS485 0x542E + #define TIOCSRS485 0x542F + + /* Open your specific device (e.g., /dev/mydevice): */ + int fd = open ("/dev/mydevice", O_RDWR); + if (fd < 0) { + /* Error handling. See errno. */ + } + + struct serial_rs485 rs485conf; + + /* Set RS485 mode: */ + rs485conf.flags |= SER_RS485_ENABLED; + + /* Set rts delay before send, if needed: */ + rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND; + rs485conf.delay_rts_before_send = ...; + + /* Set rts delay after send, if needed: */ + rs485conf.flags |= SER_RS485_RTS_AFTER_SEND; + rs485conf.delay_rts_after_send = ...; + + if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) { + /* Error handling. See errno. */ + } + + /* Use read() and write() syscalls here... */ + + /* Close the device when finished: */ + if (close (fd) < 0) { + /* Error handling. See errno. */ + } + +5. REFERENCES + + [1] include/linux/serial.h diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 6bb916d57c95..68a4fe3818a1 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers ----------------------------------- Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a "platform device". The master configuration is passed to the driver via a table -found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h: +found in include/linux/spi/pxa2xx_spi.h: struct pxa2xx_spi_master { enum pxa_ssp_type ssp_type; @@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in -"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h". The pxa2xx_spi master controller driver +"include/linux/spi/pxa2xx_spi.h". The pxa2xx_spi master controller driver will uses the configuration whenever the driver communicates with the slave device. All fields are optional. diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 209e1584c3dc..574067194f38 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -219,7 +219,7 @@ dmesg_restrict: This toggle indicates whether unprivileged users are prevented from using dmesg(8) to view messages from the kernel's log buffer. When dmesg_restrict is set to (0) there are no restrictions. When -dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use +dmesg_restrict is set set to (1), users must have CAP_SYSLOG to use dmesg(8). The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default diff --git a/Documentation/trace/events-power.txt b/Documentation/trace/events-power.txt new file mode 100644 index 000000000000..96d87b67fe37 --- /dev/null +++ b/Documentation/trace/events-power.txt @@ -0,0 +1,90 @@ + + Subsystem Trace Points: power + +The power tracing system captures events related to power transitions +within the kernel. Broadly speaking there are three major subheadings: + + o Power state switch which reports events related to suspend (S-states), + cpuidle (C-states) and cpufreq (P-states) + o System clock related changes + o Power domains related changes and transitions + +This document describes what each of the tracepoints is and why they +might be useful. + +Cf. include/trace/events/power.h for the events definitions. + +1. Power state switch events +============================ + +1.1 New trace API +----------------- + +A 'cpu' event class gathers the CPU-related events: cpuidle and +cpufreq. + +cpu_idle "state=%lu cpu_id=%lu" +cpu_frequency "state=%lu cpu_id=%lu" + +A suspend event is used to indicate the system going in and out of the +suspend mode: + +machine_suspend "state=%lu" + + +Note: the value of '-1' or '4294967295' for state means an exit from the current state, +i.e. trace_cpu_idle(4, smp_processor_id()) means that the system +enters the idle state 4, while trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()) +means that the system exits the previous idle state. + +The event which has 'state=4294967295' in the trace is very important to the user +space tools which are using it to detect the end of the current state, and so to +correctly draw the states diagrams and to calculate accurate statistics etc. + +1.2 DEPRECATED trace API +------------------------ + +A new Kconfig option CONFIG_EVENT_POWER_TRACING_DEPRECATED with the default value of +'y' has been created. This allows the legacy trace power API to be used conjointly +with the new trace API. +The Kconfig option, the old trace API (in include/trace/events/power.h) and the +old trace points will disappear in a future release (namely 2.6.41). + +power_start "type=%lu state=%lu cpu_id=%lu" +power_frequency "type=%lu state=%lu cpu_id=%lu" +power_end "cpu_id=%lu" + +The 'type' parameter takes one of those macros: + . POWER_NONE = 0, + . POWER_CSTATE = 1, /* C-State */ + . POWER_PSTATE = 2, /* Fequency change or DVFS */ + +The 'state' parameter is set depending on the type: + . Target C-state for type=POWER_CSTATE, + . Target frequency for type=POWER_PSTATE, + +power_end is used to indicate the exit of a state, corresponding to the latest +power_start event. + +2. Clocks events +================ +The clock events are used for clock enable/disable and for +clock rate change. + +clock_enable "%s state=%lu cpu_id=%lu" +clock_disable "%s state=%lu cpu_id=%lu" +clock_set_rate "%s state=%lu cpu_id=%lu" + +The first parameter gives the clock name (e.g. "gpio1_iclk"). +The second parameter is '1' for enable, '0' for disable, the target +clock rate for set_rate. + +3. Power domains events +======================= +The power domain events are used for power domains transitions + +power_domain_target "%s state=%lu cpu_id=%lu" + +The first parameter gives the power domain name (e.g. "mpu_pwrdm"). +The second parameter is the power domain target state. + diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index b29d8e56cf28..c9ffa9ced7ee 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -2,7 +2,7 @@ Alan Stern <stern@rowland.harvard.edu> - December 11, 2009 + October 28, 2010 @@ -107,9 +107,14 @@ allowed to issue dynamic suspends. The user interface for controlling dynamic PM is located in the power/ subdirectory of each USB device's sysfs directory, that is, in /sys/bus/usb/devices/.../power/ where "..." is the device's ID. The -relevant attribute files are: wakeup, control, and autosuspend. -(There may also be a file named "level"; this file was deprecated -as of the 2.6.35 kernel and replaced by the "control" file.) +relevant attribute files are: wakeup, control, and +autosuspend_delay_ms. (There may also be a file named "level"; this +file was deprecated as of the 2.6.35 kernel and replaced by the +"control" file. In 2.6.38 the "autosuspend" file will be deprecated +and replaced by the "autosuspend_delay_ms" file. The only difference +is that the newer file expresses the delay in milliseconds whereas the +older file uses seconds. Confusingly, both files are present in 2.6.37 +but only "autosuspend" works.) power/wakeup @@ -140,33 +145,36 @@ as of the 2.6.35 kernel and replaced by the "control" file.) suspended and autoresume was not allowed. This setting is no longer supported.) - power/autosuspend + power/autosuspend_delay_ms This file contains an integer value, which is the - number of seconds the device should remain idle before - the kernel will autosuspend it (the idle-delay time). - The default is 2. 0 means to autosuspend as soon as - the device becomes idle, and negative values mean - never to autosuspend. You can write a number to the - file to change the autosuspend idle-delay time. - -Writing "-1" to power/autosuspend and writing "on" to power/control do -essentially the same thing -- they both prevent the device from being -autosuspended. Yes, this is a redundancy in the API. + number of milliseconds the device should remain idle + before the kernel will autosuspend it (the idle-delay + time). The default is 2000. 0 means to autosuspend + as soon as the device becomes idle, and negative + values mean never to autosuspend. You can write a + number to the file to change the autosuspend + idle-delay time. + +Writing "-1" to power/autosuspend_delay_ms and writing "on" to +power/control do essentially the same thing -- they both prevent the +device from being autosuspended. Yes, this is a redundancy in the +API. (In 2.6.21 writing "0" to power/autosuspend would prevent the device from being autosuspended; the behavior was changed in 2.6.22. The power/autosuspend attribute did not exist prior to 2.6.21, and the power/level attribute did not exist prior to 2.6.22. power/control -was added in 2.6.34.) +was added in 2.6.34, and power/autosuspend_delay_ms was added in +2.6.37 but did not become functional until 2.6.38.) Changing the default idle-delay time ------------------------------------ -The default autosuspend idle-delay time is controlled by a module -parameter in usbcore. You can specify the value when usbcore is -loaded. For example, to set it to 5 seconds instead of 2 you would +The default autosuspend idle-delay time (in seconds) is controlled by +a module parameter in usbcore. You can specify the value when usbcore +is loaded. For example, to set it to 5 seconds instead of 2 you would do: modprobe usbcore autosuspend=5 @@ -234,25 +242,23 @@ every device. If a driver knows that its device has proper suspend/resume support, it can enable autosuspend all by itself. For example, the video -driver for a laptop's webcam might do this, since these devices are -rarely used and so should normally be autosuspended. +driver for a laptop's webcam might do this (in recent kernels they +do), since these devices are rarely used and so should normally be +autosuspended. Sometimes it turns out that even when a device does work okay with -autosuspend there are still problems. For example, there are -experimental patches adding autosuspend support to the usbhid driver, -which manages keyboards and mice, among other things. Tests with a -number of keyboards showed that typing on a suspended keyboard, while -causing the keyboard to do a remote wakeup all right, would -nonetheless frequently result in lost keystrokes. Tests with mice -showed that some of them would issue a remote-wakeup request in -response to button presses but not to motion, and some in response to -neither. +autosuspend there are still problems. For example, the usbhid driver, +which manages keyboards and mice, has autosuspend support. Tests with +a number of keyboards show that typing on a suspended keyboard, while +causing the keyboard to do a remote wakeup all right, will nonetheless +frequently result in lost keystrokes. Tests with mice show that some +of them will issue a remote-wakeup request in response to button +presses but not to motion, and some in response to neither. The kernel will not prevent you from enabling autosuspend on devices that can't handle it. It is even possible in theory to damage a -device by suspending it at the wrong time -- for example, suspending a -USB hard disk might cause it to spin down without parking the heads. -(Highly unlikely, but possible.) Take care. +device by suspending it at the wrong time. (Highly unlikely, but +possible.) Take care. The driver interface for Power Management @@ -336,10 +342,6 @@ autosuspend the interface's device. When the usage counter is = 0 then the interface is considered to be idle, and the kernel may autosuspend the device. -(There is a similar usage counter field in struct usb_device, -associated with the device itself rather than any of its interfaces. -This counter is used only by the USB core.) - Drivers need not be concerned about balancing changes to the usage counter; the USB core will undo any remaining "get"s when a driver is unbound from its interface. As a corollary, drivers must not call @@ -409,11 +411,11 @@ during autosuspend. For example, there's not much point autosuspending a keyboard if the user can't cause the keyboard to do a remote wakeup by typing on it. If the driver sets intf->needs_remote_wakeup to 1, the kernel won't autosuspend the -device if remote wakeup isn't available or has been disabled through -the power/wakeup attribute. (If the device is already autosuspended, -though, setting this flag won't cause the kernel to autoresume it. -Normally a driver would set this flag in its probe method, at which -time the device is guaranteed not to be autosuspended.) +device if remote wakeup isn't available. (If the device is already +autosuspended, though, setting this flag won't cause the kernel to +autoresume it. Normally a driver would set this flag in its probe +method, at which time the device is guaranteed not to be +autosuspended.) If a driver does its I/O asynchronously in interrupt context, it should call usb_autopm_get_interface_async() before starting output and @@ -422,20 +424,19 @@ it receives an input event, it should call usb_mark_last_busy(struct usb_device *udev); -in the event handler. This sets udev->last_busy to the current time. -udev->last_busy is the field used for idle-delay calculations; -updating it will cause any pending autosuspend to be moved back. Most -of the usb_autopm_* routines will also set the last_busy field to the -current time. +in the event handler. This tells the PM core that the device was just +busy and therefore the next autosuspend idle-delay expiration should +be pushed back. Many of the usb_autopm_* routines also make this call, +so drivers need to worry only when interrupt-driven input arrives. Asynchronous operation is always subject to races. For example, a -driver may call one of the usb_autopm_*_interface_async() routines at -a time when the core has just finished deciding the device has been -idle for long enough but not yet gotten around to calling the driver's -suspend method. The suspend method must be responsible for -synchronizing with the output request routine and the URB completion -handler; it should cause autosuspends to fail with -EBUSY if the -driver needs to use the device. +driver may call the usb_autopm_get_interface_async() routine at a time +when the core has just finished deciding the device has been idle for +long enough but not yet gotten around to calling the driver's suspend +method. The suspend method must be responsible for synchronizing with +the I/O request routine and the URB completion handler; it should +cause autosuspends to fail with -EBUSY if the driver needs to use the +device. External suspend calls should never be allowed to fail in this way, only autosuspend calls. The driver can tell them apart by checking @@ -472,7 +473,9 @@ Firstly, a device may already be autosuspended when a system suspend occurs. Since system suspends are supposed to be as transparent as possible, the device should remain suspended following the system resume. But this theory may not work out well in practice; over time -the kernel's behavior in this regard has changed. +the kernel's behavior in this regard has changed. As of 2.6.37 the +policy is to resume all devices during a system resume and let them +handle their own runtime suspends afterward. Secondly, a dynamic power-management event may occur as a system suspend is underway. The window for this is short, since system diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index ac2616a62fc3..31b485723bc5 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,5 +1,5 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2863,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2863,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868,eb1a:2875] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] @@ -9,7 +9,7 @@ 8 -> Kworld USB2800 (em2800) 9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a] 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] - 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] + 11 -> Terratec Hybrid XS (em2880) 12 -> Kworld PVR TV 2800 RF (em2820/em2840) 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] 14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) @@ -53,7 +53,7 @@ 52 -> DNT DA2 Hybrid (em2881) 53 -> Pinnacle Hybrid Pro (em2881) 54 -> Kworld VS-DVB-T 323UR (em2882) [eb1a:e323] - 55 -> Terratec Hybrid XS (em2882) (em2882) [0ccd:005e] + 55 -> Terratec Cinnergy Hybrid T USB XS (em2882) (em2882) [0ccd:005e,0ccd:0042] 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 8d9afc7d8014..6b4c72d8862d 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -180,3 +180,5 @@ 179 -> Beholder BeholdTV A7 [5ace:7090] 180 -> Avermedia PCI M733A [1461:4155,1461:4255] 181 -> TechoTrend TT-budget T-3000 [13c2:2804] +182 -> Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid [17de:b136] +183 -> Compro VideoMate Vista M1F [185b:c900] diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile deleted file mode 100644 index 1ed0e98d057d..000000000000 --- a/Documentation/video4linux/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# kbuild trick to avoid linker error. Can be omitted if a module is built. -obj- := dummy.o - -# List of programs to build -hostprogs-y := v4lgrab - -# Tell kbuild to always build the programs -always := $(hostprogs-y) diff --git a/Documentation/video4linux/README.cpia b/Documentation/video4linux/README.cpia deleted file mode 100644 index 8a747fee661f..000000000000 --- a/Documentation/video4linux/README.cpia +++ /dev/null @@ -1,191 +0,0 @@ -This is a driver for the CPiA PPC2 driven parallel connected -Camera. For example the Creative WebcamII is CPiA driven. - - ) [1]Peter Pregler, Linz 2000, published under the [2]GNU GPL - ---------------------------------------------------------------------------- - -USAGE: - -General: -======== - -1) Make sure you have created the video devices (/dev/video*): - -- if you have a recent MAKEDEV do a 'cd /dev;./MAKEDEV video' -- otherwise do a: - -cd /dev -mknod video0 c 81 0 -ln -s video0 video - -2) Compile the kernel (see below for the list of options to use), - configure your parport and reboot. - -3) If all worked well you should get messages similar - to the following (your versions may be different) on the console: - -V4L-Driver for Vision CPiA based cameras v0.7.4 -parport0: read2 timeout. -parport0: Multimedia device, VLSI Vision Ltd PPC2 -Parallel port driver for Vision CPiA based camera - CPIA Version: 1.20 (2.0) - CPIA PnP-ID: 0553:0002:0100 - VP-Version: 1.0 0100 - 1 camera(s) found - - -As modules: -=========== - -Make sure you have selected the following kernel options (you can -select all stuff as modules): - -The cpia-stuff is in the section 'Character devices -> Video For Linux'. - -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_1284=y -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_CPIA=m -CONFIG_VIDEO_CPIA_PP=m - -For autoloading of all those modules you need to tell module-init-tools -some stuff. Add the following line to your module-init-tools config-file -(e.g. /etc/modprobe.conf or wherever your distribution does store that -stuff): - -options parport_pc io=0x378 irq=7 dma=3 -alias char-major-81 cpia_pp - -The first line tells the dma/irq channels to use. Those _must_ match -the settings of your BIOS. Do NOT simply use the values above. See -Documentation/parport.txt for more information about this. The second -line associates the video-device file with the driver. Of cause you -can also load the modules once upon boot (usually done in /etc/modules). - -Linked into the kernel: -======================= - -Make sure you have selected the following kernel options. Note that -you cannot compile the parport-stuff as modules and the cpia-driver -statically (the other way round is okay though). - -The cpia-stuff is in the section 'Character devices -> Video For Linux'. - -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=y -CONFIG_PARPORT_PC_FIFO=y -CONFIG_PARPORT_1284=y -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_CPIA=y -CONFIG_VIDEO_CPIA_PP=y - -To use DMA/irq you will need to tell the kernel upon boot time the -hardware configuration of the parport. You can give the boot-parameter -at the LILO-prompt or specify it in lilo.conf. I use the following -append-line in lilo.conf: - - append="parport=0x378,7,3" - -See Documentation/parport.txt for more information about the -configuration of the parport and the values given above. Do not simply -use the values given above. - ---------------------------------------------------------------------------- -FEATURES: - -- mmap/read v4l-interface (but no overlay) -- image formats: CIF/QCIF, SIF/QSIF, various others used by isabel; - note: all sizes except CIF/QCIF are implemented by clipping, i.e. - pixels are not uploaded from the camera -- palettes: VIDEO_PALETTE_GRAY, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB555, - VIDEO_PALETTE_RGB24, VIDEO_PALETTE_RGB32, VIDEO_PALETTE_YUYV, - VIDEO_PALETTE_UYVY, VIDEO_PALETTE_YUV422 -- state information (color balance, exposure, ...) is preserved between - device opens -- complete control over camera via proc-interface (_all_ camera settings are - supported), there is also a python-gtk application available for this [3] -- works under SMP (but the driver is completely serialized and synchronous) - so you get no benefit from SMP, but at least it does not crash your box -- might work for non-Intel architecture, let us know about this - ---------------------------------------------------------------------------- -TESTED APPLICATIONS: - -- a simple test application based on Xt is available at [3] -- another test-application based on gqcam-0.4 (uses GTK) -- gqcam-0.6 should work -- xawtv-3.x (also the webcam software) -- xawtv-2.46 -- w3cam (cgi-interface and vidcat, e.g. you may try out 'vidcat |xv - -maxpect -root -quit +noresetroot -rmode 5 -') -- vic, the MBONE video conferencing tool (version 2.8ucl4-1) -- isabel 3R4beta (barely working, but AFAICT all the problems are on - their side) -- camserv-0.40 - -See [3] for pointers to v4l-applications. - ---------------------------------------------------------------------------- -KNOWN PROBLEMS: - -- some applications do not handle the image format correctly, you will - see strange horizontal stripes instead of a nice picture -> make sure - your application does use a supported image size or queries the driver - for the actually used size (reason behind this: the camera cannot - provide any image format, so if size NxM is requested the driver will - use a format to the closest fitting N1xM1, the application should now - query for this granted size, most applications do not). -- all the todo ;) -- if there is not enough light and the picture is too dark try to - adjust the SetSensorFPS setting, automatic frame rate adjustment - has its price -- do not try out isabel 3R4beta (built 135), you will be disappointed - ---------------------------------------------------------------------------- -TODO: - -- multiple camera support (struct camera or something) - This should work, - but hasn't been tested yet. -- architecture independence? -- SMP-safe asynchronous mmap interface -- nibble mode for old parport interfaces -- streaming capture, this should give a performance gain - ---------------------------------------------------------------------------- -IMPLEMENTATION NOTES: - -The camera can act in two modes, streaming or grabbing. Right now a -polling grab-scheme is used. Maybe interrupt driven streaming will be -used for a asynchronous mmap interface in the next major release of the -driver. This might give a better frame rate. - ---------------------------------------------------------------------------- -THANKS (in no particular order): - -- Scott J. Bertin <sbertin@mindspring.com> for cleanups, the proc-filesystem - and much more -- Henry Bruce <whb@vvl.co.uk> for providing developers information about - the CPiA chip, I wish all companies would treat Linux as seriously -- Karoly Erdei <Karoly.Erdei@risc.uni-linz.ac.at> and RISC-Linz for being - my boss ;) resp. my employer and for providing me the hardware and - allow me to devote some working time to this project -- Manuel J. Petit de Gabriel <mpetit@dit.upm.es> for providing help - with Isabel (http://isabel.dit.upm.es/) -- Bas Huisman <bhuism@cs.utwente.nl> for writing the initial parport code -- Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list - and maintaining the web-server[3] -- Chris Whiteford <Chris@informinteractive.com> for fixes related to the - 1.02 firmware -- special kudos to all the tester whose machines crashed and/or - will crash. :) - ---------------------------------------------------------------------------- -REFERENCES - - 1. http://www.risc.uni-linz.ac.at/ - mailto:Peter_Pregler@email.com - 2. see the file COPYING in the top directory of the kernel tree - 3. http://webcam.sourceforge.net/ diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran index 00e3f9267814..699b60e070d2 100644 --- a/Documentation/video4linux/Zoran +++ b/Documentation/video4linux/Zoran @@ -322,76 +322,11 @@ your IRQs and make sure the card has its own interrupts. 4. Programming interface -This driver conforms to video4linux and video4linux2, both can be used to -use the driver. Since video4linux didn't provide adequate calls to fully -use the cards' features, we've introduced several programming extensions, -which are currently officially accepted in the 2.4.x branch of the kernel. -These extensions are known as the v4l/mjpeg extensions. See zoran.h for -details (structs/ioctls). - -Information - video4linux: -http://linux.bytesex.org/v4l2/API.html -Documentation/video4linux/API.html -/usr/include/linux/videodev.h - -Information - video4linux/mjpeg extensions: -./zoran.h -(also see below) - -Information - video4linux2: -http://linuxtv.org -http://v4l2spec.bytesex.org/ -/usr/include/linux/videodev2.h - -More information on the video4linux/mjpeg extensions, by Serguei -Miridonovi and Rainer Johanni: --- -The ioctls for that interface are as follows: - -BUZIOC_G_PARAMS -BUZIOC_S_PARAMS - -Get and set the parameters of the buz. The user should always do a -BUZIOC_G_PARAMS (with a struct buz_params) to obtain the default -settings, change what he likes and then make a BUZIOC_S_PARAMS call. - -BUZIOC_REQBUFS - -Before being able to capture/playback, the user has to request -the buffers he is wanting to use. Fill the structure -zoran_requestbuffers with the size (recommended: 256*1024) and -the number (recommended 32 up to 256). There are no such restrictions -as for the Video for Linux buffers, you should LEAVE SUFFICIENT -MEMORY for your system however, else strange things will happen .... -On return, the zoran_requestbuffers structure contains number and -size of the actually allocated buffers. -You should use these numbers for doing a mmap of the buffers -into the user space. -The BUZIOC_REQBUFS ioctl also makes it happen, that the next mmap -maps the MJPEG buffer instead of the V4L buffers. - -BUZIOC_QBUF_CAPT -BUZIOC_QBUF_PLAY - -Queue a buffer for capture or playback. The first call also starts -streaming capture. When streaming capture is going on, you may -only queue further buffers or issue syncs until streaming -capture is switched off again with a argument of -1 to -a BUZIOC_QBUF_CAPT/BUZIOC_QBUF_PLAY ioctl. - -BUZIOC_SYNC - -Issue this ioctl when all buffers are queued. This ioctl will -block until the first buffer becomes free for saving its -data to disk (after BUZIOC_QBUF_CAPT) or for reuse (after BUZIOC_QBUF_PLAY). - -BUZIOC_G_STATUS - -Get the status of the input lines (video source connected/norm). +This driver conforms to video4linux2. Support for V4L1 and for the custom +zoran ioctls has been removed in kernel 2.6.38. For programming example, please, look at lavrec.c and lavplay.c code in -lavtools-1.2p2 package (URL: http://www.cicese.mx/) -and the 'examples' directory in the original Buz driver distribution. +the MJPEG-tools (http://mjpeg.sf.net/). Additional notes for software developers: @@ -402,9 +337,6 @@ Additional notes for software developers: standard is "more constant" for current country than geometry settings of a variety of TV capture cards which may work in ITU or square pixel format. --- -Please note that lavplay/lavrec are also included in the MJPEG-tools -(http://mjpeg.sf.net/). =========================== diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards index 12217fc49725..db833ced2cb8 100644 --- a/Documentation/video4linux/bttv/Cards +++ b/Documentation/video4linux/bttv/Cards @@ -464,10 +464,6 @@ Siemens ------- Multimedia eXtension Board (MXB) (SAA7146, SAA7111) -Stradis -------- - SDM275,SDM250,SDM026,SDM025 (SAA7146, IBMMPEG2): MPEG2 decoder only - Powercolor ---------- MTV878 diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 6a562eeeb4cd..261776e0c5e1 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -366,6 +366,7 @@ t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC pac207 2001:f115 D-Link DSB-C120 sq905c 2770:9050 Disney pix micro (CIF) +sq905c 2770:9051 Lego Bionicle sq905c 2770:9052 Disney pix micro 2 (VGA) sq905c 2770:905c All 11 known cameras with this ID sq905 2770:9120 All 24 known cameras with this ID diff --git a/Documentation/video4linux/meye.txt b/Documentation/video4linux/meye.txt index bf3af5fe558f..34e2842c70ae 100644 --- a/Documentation/video4linux/meye.txt +++ b/Documentation/video4linux/meye.txt @@ -45,8 +45,6 @@ module argument syntax (<param>=<value> when passing the option to the module or meye.<param>=<value> on the kernel boot line when meye is statically linked into the kernel). Those options are: - forcev4l1: force use of V4L1 API instead of V4L2 - gbuffers: number of capture buffers, default is 2 (32 max) gbufsize: size of each capture buffer, default is 614400 @@ -79,9 +77,8 @@ Usage: Private API: ------------ - The driver supports frame grabbing with the video4linux API - (either v4l1 or v4l2), so all video4linux tools (like xawtv) - should work with this driver. + The driver supports frame grabbing with the video4linux API, + so all video4linux tools (like xawtv) should work with this driver. Besides the video4linux interface, the driver has a private interface for accessing the Motion Eye extended parameters (camera sharpness, @@ -123,7 +120,4 @@ Private API: Bugs / Todo: ------------ - - the driver could be much cleaned up by removing the v4l1 support. - However, this means all v4l1-only applications will stop working. - - 'motioneye' still uses the meye private v4l1 API extensions. diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c deleted file mode 100644 index c8ded175796e..000000000000 --- a/Documentation/video4linux/v4lgrab.c +++ /dev/null @@ -1,201 +0,0 @@ -/* Simple Video4Linux image grabber. */ -/* - * Video4Linux Driver Test/Example Framegrabbing Program - * - * Compile with: - * gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab - * Use as: - * v4lgrab >image.ppm - * - * Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org> - * Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c - * with minor modifications (Dave Forrest, drf5n@virginia.edu). - * - * - * For some cameras you may need to pre-load libv4l to perform - * the necessary decompression, e.g.: - * - * export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so - * ./v4lgrab >image.ppm - * - * see http://hansdegoede.livejournal.com/3636.html for details. - * - */ - -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <stdio.h> -#include <sys/ioctl.h> -#include <stdlib.h> - -#include <linux/types.h> -#include <linux/videodev.h> - -#define VIDEO_DEV "/dev/video0" - -/* Stole this from tvset.c */ - -#define READ_VIDEO_PIXEL(buf, format, depth, r, g, b) \ -{ \ - switch (format) \ - { \ - case VIDEO_PALETTE_GREY: \ - switch (depth) \ - { \ - case 4: \ - case 6: \ - case 8: \ - (r) = (g) = (b) = (*buf++ << 8);\ - break; \ - \ - case 16: \ - (r) = (g) = (b) = \ - *((unsigned short *) buf); \ - buf += 2; \ - break; \ - } \ - break; \ - \ - \ - case VIDEO_PALETTE_RGB565: \ - { \ - unsigned short tmp = *(unsigned short *)buf; \ - (r) = tmp&0xF800; \ - (g) = (tmp<<5)&0xFC00; \ - (b) = (tmp<<11)&0xF800; \ - buf += 2; \ - } \ - break; \ - \ - case VIDEO_PALETTE_RGB555: \ - (r) = (buf[0]&0xF8)<<8; \ - (g) = ((buf[0] << 5 | buf[1] >> 3)&0xF8)<<8; \ - (b) = ((buf[1] << 2 ) & 0xF8)<<8; \ - buf += 2; \ - break; \ - \ - case VIDEO_PALETTE_RGB24: \ - (r) = buf[0] << 8; (g) = buf[1] << 8; \ - (b) = buf[2] << 8; \ - buf += 3; \ - break; \ - \ - default: \ - fprintf(stderr, \ - "Format %d not yet supported\n", \ - format); \ - } \ -} - -static int get_brightness_adj(unsigned char *image, long size, int *brightness) { - long i, tot = 0; - for (i=0;i<size*3;i++) - tot += image[i]; - *brightness = (128 - tot/(size*3))/3; - return !((tot/(size*3)) >= 126 && (tot/(size*3)) <= 130); -} - -int main(int argc, char ** argv) -{ - int fd = open(VIDEO_DEV, O_RDONLY), f; - struct video_capability cap; - struct video_window win; - struct video_picture vpic; - - unsigned char *buffer, *src; - int bpp = 24, r = 0, g = 0, b = 0; - unsigned int i, src_depth = 16; - - if (fd < 0) { - perror(VIDEO_DEV); - exit(1); - } - - if (ioctl(fd, VIDIOCGCAP, &cap) < 0) { - perror("VIDIOGCAP"); - fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n"); - close(fd); - exit(1); - } - - if (ioctl(fd, VIDIOCGWIN, &win) < 0) { - perror("VIDIOCGWIN"); - close(fd); - exit(1); - } - - if (ioctl(fd, VIDIOCGPICT, &vpic) < 0) { - perror("VIDIOCGPICT"); - close(fd); - exit(1); - } - - if (cap.type & VID_TYPE_MONOCHROME) { - vpic.depth=8; - vpic.palette=VIDEO_PALETTE_GREY; /* 8bit grey */ - if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) { - vpic.depth=6; - if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) { - vpic.depth=4; - if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) { - fprintf(stderr, "Unable to find a supported capture format.\n"); - close(fd); - exit(1); - } - } - } - } else { - vpic.depth=24; - vpic.palette=VIDEO_PALETTE_RGB24; - - if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) { - vpic.palette=VIDEO_PALETTE_RGB565; - vpic.depth=16; - - if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) { - vpic.palette=VIDEO_PALETTE_RGB555; - vpic.depth=15; - - if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) { - fprintf(stderr, "Unable to find a supported capture format.\n"); - return -1; - } - } - } - } - - buffer = malloc(win.width * win.height * bpp); - if (!buffer) { - fprintf(stderr, "Out of memory.\n"); - exit(1); - } - - do { - int newbright; - read(fd, buffer, win.width * win.height * bpp); - f = get_brightness_adj(buffer, win.width * win.height, &newbright); - if (f) { - vpic.brightness += (newbright << 8); - if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) { - perror("VIDIOSPICT"); - break; - } - } - } while (f); - - fprintf(stdout, "P6\n%d %d 255\n", win.width, win.height); - - src = buffer; - - for (i = 0; i < win.width * win.height; i++) { - READ_VIDEO_PIXEL(src, vpic.palette, src_depth, r, g, b); - fputc(r>>8, stdout); - fputc(g>>8, stdout); - fputc(b>>8, stdout); - } - - close(fd); - return 0; -} diff --git a/Documentation/video4linux/videobuf b/Documentation/video4linux/videobuf index 17a1f9abf260..1d00d7f15b8f 100644 --- a/Documentation/video4linux/videobuf +++ b/Documentation/video4linux/videobuf @@ -247,8 +247,6 @@ calls. The relevant helper functions are: int nonblocking); int videobuf_streamon(struct videobuf_queue *q); int videobuf_streamoff(struct videobuf_queue *q); - int videobuf_cgmbuf(struct videobuf_queue *q, struct video_mbuf *mbuf, - int count); So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's vidioc_reqbufs() callback which, in turn, usually only needs to locate the @@ -258,10 +256,7 @@ boilerplate in a lot of V4L2 drivers. The vidioc_streamon() and vidioc_streamoff() functions will be a bit more complex, of course, since they will also need to deal with starting and -stopping the capture engine. videobuf_cgmbuf(), called from the driver's -vidiocgmbuf() function, only exists if the V4L1 compatibility module has -been selected with CONFIG_VIDEO_V4L1_COMPAT, so its use must be surrounded -with #ifdef directives. +stopping the capture engine. Buffer allocation diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile index 9dcff328b964..3fa4d0668864 100644 --- a/Documentation/vm/Makefile +++ b/Documentation/vm/Makefile @@ -2,7 +2,7 @@ obj- := dummy.o # List of programs to build -hostprogs-y := slabinfo page-types hugepage-mmap hugepage-shm map_hugetlb +hostprogs-y := page-types hugepage-mmap hugepage-shm map_hugetlb # Tell kbuild to always build the programs always := $(hostprogs-y) diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c deleted file mode 100644 index 92e729f4b676..000000000000 --- a/Documentation/vm/slabinfo.c +++ /dev/null @@ -1,1364 +0,0 @@ -/* - * Slabinfo: Tool to get reports about slabs - * - * (C) 2007 sgi, Christoph Lameter - * - * Compile by: - * - * gcc -o slabinfo slabinfo.c - */ -#include <stdio.h> -#include <stdlib.h> -#include <sys/types.h> -#include <dirent.h> -#include <strings.h> -#include <string.h> -#include <unistd.h> -#include <stdarg.h> -#include <getopt.h> -#include <regex.h> -#include <errno.h> - -#define MAX_SLABS 500 -#define MAX_ALIASES 500 -#define MAX_NODES 1024 - -struct slabinfo { - char *name; - int alias; - int refs; - int aliases, align, cache_dma, cpu_slabs, destroy_by_rcu; - int hwcache_align, object_size, objs_per_slab; - int sanity_checks, slab_size, store_user, trace; - int order, poison, reclaim_account, red_zone; - unsigned long partial, objects, slabs, objects_partial, objects_total; - unsigned long alloc_fastpath, alloc_slowpath; - unsigned long free_fastpath, free_slowpath; - unsigned long free_frozen, free_add_partial, free_remove_partial; - unsigned long alloc_from_partial, alloc_slab, free_slab, alloc_refill; - unsigned long cpuslab_flush, deactivate_full, deactivate_empty; - unsigned long deactivate_to_head, deactivate_to_tail; - unsigned long deactivate_remote_frees, order_fallback; - int numa[MAX_NODES]; - int numa_partial[MAX_NODES]; -} slabinfo[MAX_SLABS]; - -struct aliasinfo { - char *name; - char *ref; - struct slabinfo *slab; -} aliasinfo[MAX_ALIASES]; - -int slabs = 0; -int actual_slabs = 0; -int aliases = 0; -int alias_targets = 0; -int highest_node = 0; - -char buffer[4096]; - -int show_empty = 0; -int show_report = 0; -int show_alias = 0; -int show_slab = 0; -int skip_zero = 1; -int show_numa = 0; -int show_track = 0; -int show_first_alias = 0; -int validate = 0; -int shrink = 0; -int show_inverted = 0; -int show_single_ref = 0; -int show_totals = 0; -int sort_size = 0; -int sort_active = 0; -int set_debug = 0; -int show_ops = 0; -int show_activity = 0; - -/* Debug options */ -int sanity = 0; -int redzone = 0; -int poison = 0; -int tracking = 0; -int tracing = 0; - -int page_size; - -regex_t pattern; - -static void fatal(const char *x, ...) -{ - va_list ap; - - va_start(ap, x); - vfprintf(stderr, x, ap); - va_end(ap); - exit(EXIT_FAILURE); -} - -static void usage(void) -{ - printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n" - "slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n" - "-a|--aliases Show aliases\n" - "-A|--activity Most active slabs first\n" - "-d<options>|--debug=<options> Set/Clear Debug options\n" - "-D|--display-active Switch line format to activity\n" - "-e|--empty Show empty slabs\n" - "-f|--first-alias Show first alias\n" - "-h|--help Show usage information\n" - "-i|--inverted Inverted list\n" - "-l|--slabs Show slabs\n" - "-n|--numa Show NUMA information\n" - "-o|--ops Show kmem_cache_ops\n" - "-s|--shrink Shrink slabs\n" - "-r|--report Detailed report on single slabs\n" - "-S|--Size Sort by size\n" - "-t|--tracking Show alloc/free information\n" - "-T|--Totals Show summary information\n" - "-v|--validate Validate slabs\n" - "-z|--zero Include empty slabs\n" - "-1|--1ref Single reference\n" - "\nValid debug options (FZPUT may be combined)\n" - "a / A Switch on all debug options (=FZUP)\n" - "- Switch off all debug options\n" - "f / F Sanity Checks (SLAB_DEBUG_FREE)\n" - "z / Z Redzoning\n" - "p / P Poisoning\n" - "u / U Tracking\n" - "t / T Tracing\n" - ); -} - -static unsigned long read_obj(const char *name) -{ - FILE *f = fopen(name, "r"); - - if (!f) - buffer[0] = 0; - else { - if (!fgets(buffer, sizeof(buffer), f)) - buffer[0] = 0; - fclose(f); - if (buffer[strlen(buffer)] == '\n') - buffer[strlen(buffer)] = 0; - } - return strlen(buffer); -} - - -/* - * Get the contents of an attribute - */ -static unsigned long get_obj(const char *name) -{ - if (!read_obj(name)) - return 0; - - return atol(buffer); -} - -static unsigned long get_obj_and_str(const char *name, char **x) -{ - unsigned long result = 0; - char *p; - - *x = NULL; - - if (!read_obj(name)) { - x = NULL; - return 0; - } - result = strtoul(buffer, &p, 10); - while (*p == ' ') - p++; - if (*p) - *x = strdup(p); - return result; -} - -static void set_obj(struct slabinfo *s, const char *name, int n) -{ - char x[100]; - FILE *f; - - snprintf(x, 100, "%s/%s", s->name, name); - f = fopen(x, "w"); - if (!f) - fatal("Cannot write to %s\n", x); - - fprintf(f, "%d\n", n); - fclose(f); -} - -static unsigned long read_slab_obj(struct slabinfo *s, const char *name) -{ - char x[100]; - FILE *f; - size_t l; - - snprintf(x, 100, "%s/%s", s->name, name); - f = fopen(x, "r"); - if (!f) { - buffer[0] = 0; - l = 0; - } else { - l = fread(buffer, 1, sizeof(buffer), f); - buffer[l] = 0; - fclose(f); - } - return l; -} - - -/* - * Put a size string together - */ -static int store_size(char *buffer, unsigned long value) -{ - unsigned long divisor = 1; - char trailer = 0; - int n; - - if (value > 1000000000UL) { - divisor = 100000000UL; - trailer = 'G'; - } else if (value > 1000000UL) { - divisor = 100000UL; - trailer = 'M'; - } else if (value > 1000UL) { - divisor = 100; - trailer = 'K'; - } - - value /= divisor; - n = sprintf(buffer, "%ld",value); - if (trailer) { - buffer[n] = trailer; - n++; - buffer[n] = 0; - } - if (divisor != 1) { - memmove(buffer + n - 2, buffer + n - 3, 4); - buffer[n-2] = '.'; - n++; - } - return n; -} - -static void decode_numa_list(int *numa, char *t) -{ - int node; - int nr; - - memset(numa, 0, MAX_NODES * sizeof(int)); - - if (!t) - return; - - while (*t == 'N') { - t++; - node = strtoul(t, &t, 10); - if (*t == '=') { - t++; - nr = strtoul(t, &t, 10); - numa[node] = nr; - if (node > highest_node) - highest_node = node; - } - while (*t == ' ') - t++; - } -} - -static void slab_validate(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - set_obj(s, "validate", 1); -} - -static void slab_shrink(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - set_obj(s, "shrink", 1); -} - -int line = 0; - -static void first_line(void) -{ - if (show_activity) - printf("Name Objects Alloc Free %%Fast Fallb O\n"); - else - printf("Name Objects Objsize Space " - "Slabs/Part/Cpu O/S O %%Fr %%Ef Flg\n"); -} - -/* - * Find the shortest alias of a slab - */ -static struct aliasinfo *find_one_alias(struct slabinfo *find) -{ - struct aliasinfo *a; - struct aliasinfo *best = NULL; - - for(a = aliasinfo;a < aliasinfo + aliases; a++) { - if (a->slab == find && - (!best || strlen(best->name) < strlen(a->name))) { - best = a; - if (strncmp(a->name,"kmall", 5) == 0) - return best; - } - } - return best; -} - -static unsigned long slab_size(struct slabinfo *s) -{ - return s->slabs * (page_size << s->order); -} - -static unsigned long slab_activity(struct slabinfo *s) -{ - return s->alloc_fastpath + s->free_fastpath + - s->alloc_slowpath + s->free_slowpath; -} - -static void slab_numa(struct slabinfo *s, int mode) -{ - int node; - - if (strcmp(s->name, "*") == 0) - return; - - if (!highest_node) { - printf("\n%s: No NUMA information available.\n", s->name); - return; - } - - if (skip_zero && !s->slabs) - return; - - if (!line) { - printf("\n%-21s:", mode ? "NUMA nodes" : "Slab"); - for(node = 0; node <= highest_node; node++) - printf(" %4d", node); - printf("\n----------------------"); - for(node = 0; node <= highest_node; node++) - printf("-----"); - printf("\n"); - } - printf("%-21s ", mode ? "All slabs" : s->name); - for(node = 0; node <= highest_node; node++) { - char b[20]; - - store_size(b, s->numa[node]); - printf(" %4s", b); - } - printf("\n"); - if (mode) { - printf("%-21s ", "Partial slabs"); - for(node = 0; node <= highest_node; node++) { - char b[20]; - - store_size(b, s->numa_partial[node]); - printf(" %4s", b); - } - printf("\n"); - } - line++; -} - -static void show_tracking(struct slabinfo *s) -{ - printf("\n%s: Kernel object allocation\n", s->name); - printf("-----------------------------------------------------------------------\n"); - if (read_slab_obj(s, "alloc_calls")) - printf(buffer); - else - printf("No Data\n"); - - printf("\n%s: Kernel object freeing\n", s->name); - printf("------------------------------------------------------------------------\n"); - if (read_slab_obj(s, "free_calls")) - printf(buffer); - else - printf("No Data\n"); - -} - -static void ops(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - if (read_slab_obj(s, "ops")) { - printf("\n%s: kmem_cache operations\n", s->name); - printf("--------------------------------------------\n"); - printf(buffer); - } else - printf("\n%s has no kmem_cache operations\n", s->name); -} - -static const char *onoff(int x) -{ - if (x) - return "On "; - return "Off"; -} - -static void slab_stats(struct slabinfo *s) -{ - unsigned long total_alloc; - unsigned long total_free; - unsigned long total; - - if (!s->alloc_slab) - return; - - total_alloc = s->alloc_fastpath + s->alloc_slowpath; - total_free = s->free_fastpath + s->free_slowpath; - - if (!total_alloc) - return; - - printf("\n"); - printf("Slab Perf Counter Alloc Free %%Al %%Fr\n"); - printf("--------------------------------------------------\n"); - printf("Fastpath %8lu %8lu %3lu %3lu\n", - s->alloc_fastpath, s->free_fastpath, - s->alloc_fastpath * 100 / total_alloc, - s->free_fastpath * 100 / total_free); - printf("Slowpath %8lu %8lu %3lu %3lu\n", - total_alloc - s->alloc_fastpath, s->free_slowpath, - (total_alloc - s->alloc_fastpath) * 100 / total_alloc, - s->free_slowpath * 100 / total_free); - printf("Page Alloc %8lu %8lu %3lu %3lu\n", - s->alloc_slab, s->free_slab, - s->alloc_slab * 100 / total_alloc, - s->free_slab * 100 / total_free); - printf("Add partial %8lu %8lu %3lu %3lu\n", - s->deactivate_to_head + s->deactivate_to_tail, - s->free_add_partial, - (s->deactivate_to_head + s->deactivate_to_tail) * 100 / total_alloc, - s->free_add_partial * 100 / total_free); - printf("Remove partial %8lu %8lu %3lu %3lu\n", - s->alloc_from_partial, s->free_remove_partial, - s->alloc_from_partial * 100 / total_alloc, - s->free_remove_partial * 100 / total_free); - - printf("RemoteObj/SlabFrozen %8lu %8lu %3lu %3lu\n", - s->deactivate_remote_frees, s->free_frozen, - s->deactivate_remote_frees * 100 / total_alloc, - s->free_frozen * 100 / total_free); - - printf("Total %8lu %8lu\n\n", total_alloc, total_free); - - if (s->cpuslab_flush) - printf("Flushes %8lu\n", s->cpuslab_flush); - - if (s->alloc_refill) - printf("Refill %8lu\n", s->alloc_refill); - - total = s->deactivate_full + s->deactivate_empty + - s->deactivate_to_head + s->deactivate_to_tail; - - if (total) - printf("Deactivate Full=%lu(%lu%%) Empty=%lu(%lu%%) " - "ToHead=%lu(%lu%%) ToTail=%lu(%lu%%)\n", - s->deactivate_full, (s->deactivate_full * 100) / total, - s->deactivate_empty, (s->deactivate_empty * 100) / total, - s->deactivate_to_head, (s->deactivate_to_head * 100) / total, - s->deactivate_to_tail, (s->deactivate_to_tail * 100) / total); -} - -static void report(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - printf("\nSlabcache: %-20s Aliases: %2d Order : %2d Objects: %lu\n", - s->name, s->aliases, s->order, s->objects); - if (s->hwcache_align) - printf("** Hardware cacheline aligned\n"); - if (s->cache_dma) - printf("** Memory is allocated in a special DMA zone\n"); - if (s->destroy_by_rcu) - printf("** Slabs are destroyed via RCU\n"); - if (s->reclaim_account) - printf("** Reclaim accounting active\n"); - - printf("\nSizes (bytes) Slabs Debug Memory\n"); - printf("------------------------------------------------------------------------\n"); - printf("Object : %7d Total : %7ld Sanity Checks : %s Total: %7ld\n", - s->object_size, s->slabs, onoff(s->sanity_checks), - s->slabs * (page_size << s->order)); - printf("SlabObj: %7d Full : %7ld Redzoning : %s Used : %7ld\n", - s->slab_size, s->slabs - s->partial - s->cpu_slabs, - onoff(s->red_zone), s->objects * s->object_size); - printf("SlabSiz: %7d Partial: %7ld Poisoning : %s Loss : %7ld\n", - page_size << s->order, s->partial, onoff(s->poison), - s->slabs * (page_size << s->order) - s->objects * s->object_size); - printf("Loss : %7d CpuSlab: %7d Tracking : %s Lalig: %7ld\n", - s->slab_size - s->object_size, s->cpu_slabs, onoff(s->store_user), - (s->slab_size - s->object_size) * s->objects); - printf("Align : %7d Objects: %7d Tracing : %s Lpadd: %7ld\n", - s->align, s->objs_per_slab, onoff(s->trace), - ((page_size << s->order) - s->objs_per_slab * s->slab_size) * - s->slabs); - - ops(s); - show_tracking(s); - slab_numa(s, 1); - slab_stats(s); -} - -static void slabcache(struct slabinfo *s) -{ - char size_str[20]; - char dist_str[40]; - char flags[20]; - char *p = flags; - - if (strcmp(s->name, "*") == 0) - return; - - if (actual_slabs == 1) { - report(s); - return; - } - - if (skip_zero && !show_empty && !s->slabs) - return; - - if (show_empty && s->slabs) - return; - - store_size(size_str, slab_size(s)); - snprintf(dist_str, 40, "%lu/%lu/%d", s->slabs - s->cpu_slabs, - s->partial, s->cpu_slabs); - - if (!line++) - first_line(); - - if (s->aliases) - *p++ = '*'; - if (s->cache_dma) - *p++ = 'd'; - if (s->hwcache_align) - *p++ = 'A'; - if (s->poison) - *p++ = 'P'; - if (s->reclaim_account) - *p++ = 'a'; - if (s->red_zone) - *p++ = 'Z'; - if (s->sanity_checks) - *p++ = 'F'; - if (s->store_user) - *p++ = 'U'; - if (s->trace) - *p++ = 'T'; - - *p = 0; - if (show_activity) { - unsigned long total_alloc; - unsigned long total_free; - - total_alloc = s->alloc_fastpath + s->alloc_slowpath; - total_free = s->free_fastpath + s->free_slowpath; - - printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d\n", - s->name, s->objects, - total_alloc, total_free, - total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0, - total_free ? (s->free_fastpath * 100 / total_free) : 0, - s->order_fallback, s->order); - } - else - printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n", - s->name, s->objects, s->object_size, size_str, dist_str, - s->objs_per_slab, s->order, - s->slabs ? (s->partial * 100) / s->slabs : 100, - s->slabs ? (s->objects * s->object_size * 100) / - (s->slabs * (page_size << s->order)) : 100, - flags); -} - -/* - * Analyze debug options. Return false if something is amiss. - */ -static int debug_opt_scan(char *opt) -{ - if (!opt || !opt[0] || strcmp(opt, "-") == 0) - return 1; - - if (strcasecmp(opt, "a") == 0) { - sanity = 1; - poison = 1; - redzone = 1; - tracking = 1; - return 1; - } - - for ( ; *opt; opt++) - switch (*opt) { - case 'F' : case 'f': - if (sanity) - return 0; - sanity = 1; - break; - case 'P' : case 'p': - if (poison) - return 0; - poison = 1; - break; - - case 'Z' : case 'z': - if (redzone) - return 0; - redzone = 1; - break; - - case 'U' : case 'u': - if (tracking) - return 0; - tracking = 1; - break; - - case 'T' : case 't': - if (tracing) - return 0; - tracing = 1; - break; - default: - return 0; - } - return 1; -} - -static int slab_empty(struct slabinfo *s) -{ - if (s->objects > 0) - return 0; - - /* - * We may still have slabs even if there are no objects. Shrinking will - * remove them. - */ - if (s->slabs != 0) - set_obj(s, "shrink", 1); - - return 1; -} - -static void slab_debug(struct slabinfo *s) -{ - if (strcmp(s->name, "*") == 0) - return; - - if (sanity && !s->sanity_checks) { - set_obj(s, "sanity", 1); - } - if (!sanity && s->sanity_checks) { - if (slab_empty(s)) - set_obj(s, "sanity", 0); - else - fprintf(stderr, "%s not empty cannot disable sanity checks\n", s->name); - } - if (redzone && !s->red_zone) { - if (slab_empty(s)) - set_obj(s, "red_zone", 1); - else - fprintf(stderr, "%s not empty cannot enable redzoning\n", s->name); - } - if (!redzone && s->red_zone) { - if (slab_empty(s)) - set_obj(s, "red_zone", 0); - else - fprintf(stderr, "%s not empty cannot disable redzoning\n", s->name); - } - if (poison && !s->poison) { - if (slab_empty(s)) - set_obj(s, "poison", 1); - else - fprintf(stderr, "%s not empty cannot enable poisoning\n", s->name); - } - if (!poison && s->poison) { - if (slab_empty(s)) - set_obj(s, "poison", 0); - else - fprintf(stderr, "%s not empty cannot disable poisoning\n", s->name); - } - if (tracking && !s->store_user) { - if (slab_empty(s)) - set_obj(s, "store_user", 1); - else - fprintf(stderr, "%s not empty cannot enable tracking\n", s->name); - } - if (!tracking && s->store_user) { - if (slab_empty(s)) - set_obj(s, "store_user", 0); - else - fprintf(stderr, "%s not empty cannot disable tracking\n", s->name); - } - if (tracing && !s->trace) { - if (slabs == 1) - set_obj(s, "trace", 1); - else - fprintf(stderr, "%s can only enable trace for one slab at a time\n", s->name); - } - if (!tracing && s->trace) - set_obj(s, "trace", 1); -} - -static void totals(void) -{ - struct slabinfo *s; - - int used_slabs = 0; - char b1[20], b2[20], b3[20], b4[20]; - unsigned long long max = 1ULL << 63; - - /* Object size */ - unsigned long long min_objsize = max, max_objsize = 0, avg_objsize; - - /* Number of partial slabs in a slabcache */ - unsigned long long min_partial = max, max_partial = 0, - avg_partial, total_partial = 0; - - /* Number of slabs in a slab cache */ - unsigned long long min_slabs = max, max_slabs = 0, - avg_slabs, total_slabs = 0; - - /* Size of the whole slab */ - unsigned long long min_size = max, max_size = 0, - avg_size, total_size = 0; - - /* Bytes used for object storage in a slab */ - unsigned long long min_used = max, max_used = 0, - avg_used, total_used = 0; - - /* Waste: Bytes used for alignment and padding */ - unsigned long long min_waste = max, max_waste = 0, - avg_waste, total_waste = 0; - /* Number of objects in a slab */ - unsigned long long min_objects = max, max_objects = 0, - avg_objects, total_objects = 0; - /* Waste per object */ - unsigned long long min_objwaste = max, - max_objwaste = 0, avg_objwaste, - total_objwaste = 0; - - /* Memory per object */ - unsigned long long min_memobj = max, - max_memobj = 0, avg_memobj, - total_objsize = 0; - - /* Percentage of partial slabs per slab */ - unsigned long min_ppart = 100, max_ppart = 0, - avg_ppart, total_ppart = 0; - - /* Number of objects in partial slabs */ - unsigned long min_partobj = max, max_partobj = 0, - avg_partobj, total_partobj = 0; - - /* Percentage of partial objects of all objects in a slab */ - unsigned long min_ppartobj = 100, max_ppartobj = 0, - avg_ppartobj, total_ppartobj = 0; - - - for (s = slabinfo; s < slabinfo + slabs; s++) { - unsigned long long size; - unsigned long used; - unsigned long long wasted; - unsigned long long objwaste; - unsigned long percentage_partial_slabs; - unsigned long percentage_partial_objs; - - if (!s->slabs || !s->objects) - continue; - - used_slabs++; - - size = slab_size(s); - used = s->objects * s->object_size; - wasted = size - used; - objwaste = s->slab_size - s->object_size; - - percentage_partial_slabs = s->partial * 100 / s->slabs; - if (percentage_partial_slabs > 100) - percentage_partial_slabs = 100; - - percentage_partial_objs = s->objects_partial * 100 - / s->objects; - - if (percentage_partial_objs > 100) - percentage_partial_objs = 100; - - if (s->object_size < min_objsize) - min_objsize = s->object_size; - if (s->partial < min_partial) - min_partial = s->partial; - if (s->slabs < min_slabs) - min_slabs = s->slabs; - if (size < min_size) - min_size = size; - if (wasted < min_waste) - min_waste = wasted; - if (objwaste < min_objwaste) - min_objwaste = objwaste; - if (s->objects < min_objects) - min_objects = s->objects; - if (used < min_used) - min_used = used; - if (s->objects_partial < min_partobj) - min_partobj = s->objects_partial; - if (percentage_partial_slabs < min_ppart) - min_ppart = percentage_partial_slabs; - if (percentage_partial_objs < min_ppartobj) - min_ppartobj = percentage_partial_objs; - if (s->slab_size < min_memobj) - min_memobj = s->slab_size; - - if (s->object_size > max_objsize) - max_objsize = s->object_size; - if (s->partial > max_partial) - max_partial = s->partial; - if (s->slabs > max_slabs) - max_slabs = s->slabs; - if (size > max_size) - max_size = size; - if (wasted > max_waste) - max_waste = wasted; - if (objwaste > max_objwaste) - max_objwaste = objwaste; - if (s->objects > max_objects) - max_objects = s->objects; - if (used > max_used) - max_used = used; - if (s->objects_partial > max_partobj) - max_partobj = s->objects_partial; - if (percentage_partial_slabs > max_ppart) - max_ppart = percentage_partial_slabs; - if (percentage_partial_objs > max_ppartobj) - max_ppartobj = percentage_partial_objs; - if (s->slab_size > max_memobj) - max_memobj = s->slab_size; - - total_partial += s->partial; - total_slabs += s->slabs; - total_size += size; - total_waste += wasted; - - total_objects += s->objects; - total_used += used; - total_partobj += s->objects_partial; - total_ppart += percentage_partial_slabs; - total_ppartobj += percentage_partial_objs; - - total_objwaste += s->objects * objwaste; - total_objsize += s->objects * s->slab_size; - } - - if (!total_objects) { - printf("No objects\n"); - return; - } - if (!used_slabs) { - printf("No slabs\n"); - return; - } - - /* Per slab averages */ - avg_partial = total_partial / used_slabs; - avg_slabs = total_slabs / used_slabs; - avg_size = total_size / used_slabs; - avg_waste = total_waste / used_slabs; - - avg_objects = total_objects / used_slabs; - avg_used = total_used / used_slabs; - avg_partobj = total_partobj / used_slabs; - avg_ppart = total_ppart / used_slabs; - avg_ppartobj = total_ppartobj / used_slabs; - - /* Per object object sizes */ - avg_objsize = total_used / total_objects; - avg_objwaste = total_objwaste / total_objects; - avg_partobj = total_partobj * 100 / total_objects; - avg_memobj = total_objsize / total_objects; - - printf("Slabcache Totals\n"); - printf("----------------\n"); - printf("Slabcaches : %3d Aliases : %3d->%-3d Active: %3d\n", - slabs, aliases, alias_targets, used_slabs); - - store_size(b1, total_size);store_size(b2, total_waste); - store_size(b3, total_waste * 100 / total_used); - printf("Memory used: %6s # Loss : %6s MRatio:%6s%%\n", b1, b2, b3); - - store_size(b1, total_objects);store_size(b2, total_partobj); - store_size(b3, total_partobj * 100 / total_objects); - printf("# Objects : %6s # PartObj: %6s ORatio:%6s%%\n", b1, b2, b3); - - printf("\n"); - printf("Per Cache Average Min Max Total\n"); - printf("---------------------------------------------------------\n"); - - store_size(b1, avg_objects);store_size(b2, min_objects); - store_size(b3, max_objects);store_size(b4, total_objects); - printf("#Objects %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_slabs);store_size(b2, min_slabs); - store_size(b3, max_slabs);store_size(b4, total_slabs); - printf("#Slabs %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_partial);store_size(b2, min_partial); - store_size(b3, max_partial);store_size(b4, total_partial); - printf("#PartSlab %10s %10s %10s %10s\n", - b1, b2, b3, b4); - store_size(b1, avg_ppart);store_size(b2, min_ppart); - store_size(b3, max_ppart); - store_size(b4, total_partial * 100 / total_slabs); - printf("%%PartSlab%10s%% %10s%% %10s%% %10s%%\n", - b1, b2, b3, b4); - - store_size(b1, avg_partobj);store_size(b2, min_partobj); - store_size(b3, max_partobj); - store_size(b4, total_partobj); - printf("PartObjs %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_ppartobj);store_size(b2, min_ppartobj); - store_size(b3, max_ppartobj); - store_size(b4, total_partobj * 100 / total_objects); - printf("%% PartObj%10s%% %10s%% %10s%% %10s%%\n", - b1, b2, b3, b4); - - store_size(b1, avg_size);store_size(b2, min_size); - store_size(b3, max_size);store_size(b4, total_size); - printf("Memory %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_used);store_size(b2, min_used); - store_size(b3, max_used);store_size(b4, total_used); - printf("Used %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - store_size(b1, avg_waste);store_size(b2, min_waste); - store_size(b3, max_waste);store_size(b4, total_waste); - printf("Loss %10s %10s %10s %10s\n", - b1, b2, b3, b4); - - printf("\n"); - printf("Per Object Average Min Max\n"); - printf("---------------------------------------------\n"); - - store_size(b1, avg_memobj);store_size(b2, min_memobj); - store_size(b3, max_memobj); - printf("Memory %10s %10s %10s\n", - b1, b2, b3); - store_size(b1, avg_objsize);store_size(b2, min_objsize); - store_size(b3, max_objsize); - printf("User %10s %10s %10s\n", - b1, b2, b3); - - store_size(b1, avg_objwaste);store_size(b2, min_objwaste); - store_size(b3, max_objwaste); - printf("Loss %10s %10s %10s\n", - b1, b2, b3); -} - -static void sort_slabs(void) -{ - struct slabinfo *s1,*s2; - - for (s1 = slabinfo; s1 < slabinfo + slabs; s1++) { - for (s2 = s1 + 1; s2 < slabinfo + slabs; s2++) { - int result; - - if (sort_size) - result = slab_size(s1) < slab_size(s2); - else if (sort_active) - result = slab_activity(s1) < slab_activity(s2); - else - result = strcasecmp(s1->name, s2->name); - - if (show_inverted) - result = -result; - - if (result > 0) { - struct slabinfo t; - - memcpy(&t, s1, sizeof(struct slabinfo)); - memcpy(s1, s2, sizeof(struct slabinfo)); - memcpy(s2, &t, sizeof(struct slabinfo)); - } - } - } -} - -static void sort_aliases(void) -{ - struct aliasinfo *a1,*a2; - - for (a1 = aliasinfo; a1 < aliasinfo + aliases; a1++) { - for (a2 = a1 + 1; a2 < aliasinfo + aliases; a2++) { - char *n1, *n2; - - n1 = a1->name; - n2 = a2->name; - if (show_alias && !show_inverted) { - n1 = a1->ref; - n2 = a2->ref; - } - if (strcasecmp(n1, n2) > 0) { - struct aliasinfo t; - - memcpy(&t, a1, sizeof(struct aliasinfo)); - memcpy(a1, a2, sizeof(struct aliasinfo)); - memcpy(a2, &t, sizeof(struct aliasinfo)); - } - } - } -} - -static void link_slabs(void) -{ - struct aliasinfo *a; - struct slabinfo *s; - - for (a = aliasinfo; a < aliasinfo + aliases; a++) { - - for (s = slabinfo; s < slabinfo + slabs; s++) - if (strcmp(a->ref, s->name) == 0) { - a->slab = s; - s->refs++; - break; - } - if (s == slabinfo + slabs) - fatal("Unresolved alias %s\n", a->ref); - } -} - -static void alias(void) -{ - struct aliasinfo *a; - char *active = NULL; - - sort_aliases(); - link_slabs(); - - for(a = aliasinfo; a < aliasinfo + aliases; a++) { - - if (!show_single_ref && a->slab->refs == 1) - continue; - - if (!show_inverted) { - if (active) { - if (strcmp(a->slab->name, active) == 0) { - printf(" %s", a->name); - continue; - } - } - printf("\n%-12s <- %s", a->slab->name, a->name); - active = a->slab->name; - } - else - printf("%-20s -> %s\n", a->name, a->slab->name); - } - if (active) - printf("\n"); -} - - -static void rename_slabs(void) -{ - struct slabinfo *s; - struct aliasinfo *a; - - for (s = slabinfo; s < slabinfo + slabs; s++) { - if (*s->name != ':') - continue; - - if (s->refs > 1 && !show_first_alias) - continue; - - a = find_one_alias(s); - - if (a) - s->name = a->name; - else { - s->name = "*"; - actual_slabs--; - } - } -} - -static int slab_mismatch(char *slab) -{ - return regexec(&pattern, slab, 0, NULL, 0); -} - -static void read_slab_dir(void) -{ - DIR *dir; - struct dirent *de; - struct slabinfo *slab = slabinfo; - struct aliasinfo *alias = aliasinfo; - char *p; - char *t; - int count; - - if (chdir("/sys/kernel/slab") && chdir("/sys/slab")) - fatal("SYSFS support for SLUB not active\n"); - - dir = opendir("."); - while ((de = readdir(dir))) { - if (de->d_name[0] == '.' || - (de->d_name[0] != ':' && slab_mismatch(de->d_name))) - continue; - switch (de->d_type) { - case DT_LNK: - alias->name = strdup(de->d_name); - count = readlink(de->d_name, buffer, sizeof(buffer)); - - if (count < 0) - fatal("Cannot read symlink %s\n", de->d_name); - - buffer[count] = 0; - p = buffer + count; - while (p > buffer && p[-1] != '/') - p--; - alias->ref = strdup(p); - alias++; - break; - case DT_DIR: - if (chdir(de->d_name)) - fatal("Unable to access slab %s\n", slab->name); - slab->name = strdup(de->d_name); - slab->alias = 0; - slab->refs = 0; - slab->aliases = get_obj("aliases"); - slab->align = get_obj("align"); - slab->cache_dma = get_obj("cache_dma"); - slab->cpu_slabs = get_obj("cpu_slabs"); - slab->destroy_by_rcu = get_obj("destroy_by_rcu"); - slab->hwcache_align = get_obj("hwcache_align"); - slab->object_size = get_obj("object_size"); - slab->objects = get_obj("objects"); - slab->objects_partial = get_obj("objects_partial"); - slab->objects_total = get_obj("objects_total"); - slab->objs_per_slab = get_obj("objs_per_slab"); - slab->order = get_obj("order"); - slab->partial = get_obj("partial"); - slab->partial = get_obj_and_str("partial", &t); - decode_numa_list(slab->numa_partial, t); - free(t); - slab->poison = get_obj("poison"); - slab->reclaim_account = get_obj("reclaim_account"); - slab->red_zone = get_obj("red_zone"); - slab->sanity_checks = get_obj("sanity_checks"); - slab->slab_size = get_obj("slab_size"); - slab->slabs = get_obj_and_str("slabs", &t); - decode_numa_list(slab->numa, t); - free(t); - slab->store_user = get_obj("store_user"); - slab->trace = get_obj("trace"); - slab->alloc_fastpath = get_obj("alloc_fastpath"); - slab->alloc_slowpath = get_obj("alloc_slowpath"); - slab->free_fastpath = get_obj("free_fastpath"); - slab->free_slowpath = get_obj("free_slowpath"); - slab->free_frozen= get_obj("free_frozen"); - slab->free_add_partial = get_obj("free_add_partial"); - slab->free_remove_partial = get_obj("free_remove_partial"); - slab->alloc_from_partial = get_obj("alloc_from_partial"); - slab->alloc_slab = get_obj("alloc_slab"); - slab->alloc_refill = get_obj("alloc_refill"); - slab->free_slab = get_obj("free_slab"); - slab->cpuslab_flush = get_obj("cpuslab_flush"); - slab->deactivate_full = get_obj("deactivate_full"); - slab->deactivate_empty = get_obj("deactivate_empty"); - slab->deactivate_to_head = get_obj("deactivate_to_head"); - slab->deactivate_to_tail = get_obj("deactivate_to_tail"); - slab->deactivate_remote_frees = get_obj("deactivate_remote_frees"); - slab->order_fallback = get_obj("order_fallback"); - chdir(".."); - if (slab->name[0] == ':') - alias_targets++; - slab++; - break; - default : - fatal("Unknown file type %lx\n", de->d_type); - } - } - closedir(dir); - slabs = slab - slabinfo; - actual_slabs = slabs; - aliases = alias - aliasinfo; - if (slabs > MAX_SLABS) - fatal("Too many slabs\n"); - if (aliases > MAX_ALIASES) - fatal("Too many aliases\n"); -} - -static void output_slabs(void) -{ - struct slabinfo *slab; - - for (slab = slabinfo; slab < slabinfo + slabs; slab++) { - - if (slab->alias) - continue; - - - if (show_numa) - slab_numa(slab, 0); - else if (show_track) - show_tracking(slab); - else if (validate) - slab_validate(slab); - else if (shrink) - slab_shrink(slab); - else if (set_debug) - slab_debug(slab); - else if (show_ops) - ops(slab); - else if (show_slab) - slabcache(slab); - else if (show_report) - report(slab); - } -} - -struct option opts[] = { - { "aliases", 0, NULL, 'a' }, - { "activity", 0, NULL, 'A' }, - { "debug", 2, NULL, 'd' }, - { "display-activity", 0, NULL, 'D' }, - { "empty", 0, NULL, 'e' }, - { "first-alias", 0, NULL, 'f' }, - { "help", 0, NULL, 'h' }, - { "inverted", 0, NULL, 'i'}, - { "numa", 0, NULL, 'n' }, - { "ops", 0, NULL, 'o' }, - { "report", 0, NULL, 'r' }, - { "shrink", 0, NULL, 's' }, - { "slabs", 0, NULL, 'l' }, - { "track", 0, NULL, 't'}, - { "validate", 0, NULL, 'v' }, - { "zero", 0, NULL, 'z' }, - { "1ref", 0, NULL, '1'}, - { NULL, 0, NULL, 0 } -}; - -int main(int argc, char *argv[]) -{ - int c; - int err; - char *pattern_source; - - page_size = getpagesize(); - - while ((c = getopt_long(argc, argv, "aAd::Defhil1noprstvzTS", - opts, NULL)) != -1) - switch (c) { - case '1': - show_single_ref = 1; - break; - case 'a': - show_alias = 1; - break; - case 'A': - sort_active = 1; - break; - case 'd': - set_debug = 1; - if (!debug_opt_scan(optarg)) - fatal("Invalid debug option '%s'\n", optarg); - break; - case 'D': - show_activity = 1; - break; - case 'e': - show_empty = 1; - break; - case 'f': - show_first_alias = 1; - break; - case 'h': - usage(); - return 0; - case 'i': - show_inverted = 1; - break; - case 'n': - show_numa = 1; - break; - case 'o': - show_ops = 1; - break; - case 'r': - show_report = 1; - break; - case 's': - shrink = 1; - break; - case 'l': - show_slab = 1; - break; - case 't': - show_track = 1; - break; - case 'v': - validate = 1; - break; - case 'z': - skip_zero = 0; - break; - case 'T': - show_totals = 1; - break; - case 'S': - sort_size = 1; - break; - - default: - fatal("%s: Invalid option '%c'\n", argv[0], optopt); - - } - - if (!show_slab && !show_alias && !show_track && !show_report - && !validate && !shrink && !set_debug && !show_ops) - show_slab = 1; - - if (argc > optind) - pattern_source = argv[optind]; - else - pattern_source = ".*"; - - err = regcomp(&pattern, pattern_source, REG_ICASE|REG_NOSUB); - if (err) - fatal("%s: Invalid pattern '%s' code %d\n", - argv[0], pattern_source, err); - read_slab_dir(); - if (show_alias) - alias(); - else - if (show_totals) - totals(); - else { - link_slabs(); - rename_slabs(); - sort_slabs(); - output_slabs(); - } - return 0; -} diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 30b43e1b2697..bdeb81ccb5f6 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -600,6 +600,7 @@ Protocol: 2.07+ 0x00000001 lguest 0x00000002 Xen 0x00000003 Moorestown MID + 0x00000004 CE4100 TV Platform Field name: hardware_subarch_data Type: write (subarch-dependent) |