summaryrefslogtreecommitdiff
path: root/drivers/media/usb/em28xx/em28xx-video.c
Commit message (Collapse)AuthorAge
* [media] em28xx: add support for V4L2_PIX_FMT_SRGGB8Frank Schaefer2017-04-17
| | | | | | | | Adding support for SRGGB8 is as simple as adding a new entry at struct em28xx_fmt. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: shed some light on video input formatsFrank Schaefer2017-04-17
| | | | | | | | | | | | | | CbYCrY has been identified by looking into the tvp5150 driver and the saa7115 datasheet. YUV formats have been verified with em2765 + ov2640 (VAD Laplace webcam). RGB8 formats have been verified with em2710/em2820 + mt9v011 (Silvercrest webcam 1.3mpix). I also did some cross-checking with these two camera devices and 0x08-0x0b are at least 16 bits per pixel formats on em2710/em2820, too, and 0x0c-0x0f are at least 8 bits per pixel formats on em2765, too. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: get rid of the dummy clock sourceFrank Schaefer2017-04-17
| | | | | | | | | | | The v4l2 dummy clock has been added with commit fc5d0f8a8878 ("V4L2: em28xx: register a V4L2 clock source") to be able to use the ov2640 soc_camera driver. Since commit 46796cfcd346 ("ov2640: use standard clk and enable it") it is no longer required. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: don't store usb_device at struct em28xxMauro Carvalho Chehab2016-12-12
| | | | | | | | Now that we're storing usb_interface at em28xx struct, there's no good reason to keep storing usb_device, as we can get it from usb_interface. So, get rid of it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: use usb_interface for dev_foo() callsMauro Carvalho Chehab2016-12-12
| | | | | | | | The usb_device->dev is not the right device for dev_foo() calls. Instead, it should use usb_interface->dev. Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: convert it from pr_foo() to dev_foo()Mauro Carvalho Chehab2016-11-18
| | | | | | | | | | | Instead of using pr_foo(), use dev_foo(), with provides a better output. As this device is a multi-interface one, we'll set the device name to show the chipset and the driver used. While here, get rid of printk continuation messages. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: convert the remaining printks to pr_fooMauro Carvalho Chehab2016-10-21
| | | | | | | | | | | | There are still several places with printk's called directly. Convert them to pr_foo() macros, except for the debug printk's, as those are enabled via modprobe vars. While here, realign the pr_foo() arguments to match the recommended CodingStyle. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: use pr_foo instead of em28xx-specific printk macrosMauro Carvalho Chehab2016-10-21
| | | | | | | There's no reason to keep using em28xx-specific printk macros here. Just use pr_foo(). Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: don't break long linesMauro Carvalho Chehab2016-10-21
| | | | | | | | | | Due to the 80-cols checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. So, join those continuation lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] usb: constify vb2_ops structuresJulia Lawall2016-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for vb2_ops structures that are only stored in the ops field of a vb2_queue structure. That field is declared const, so vb2_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] vb2: replace void *alloc_ctxs by struct device *alloc_devsHans Verkuil2016-07-08
| | | | | | | | | | | | | | | | Make this a proper typed array. Drop the old allocate context code since that is no longer used. Note that the memops functions now get a struct device pointer instead of the struct device ** that was there initially (actually a void pointer to a struct containing only a struct device pointer). This code is now a lot cleaner. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* [media] em28xx: restore lost #ifdefArnd Bergmann2016-03-03
| | | | | | | | | | | | | | | | | The cleanup that changed the em28xx driver to use v4l2_mc_create_media_graph instead of its own implementation causes a build error when CONFIG_MEDIA_CONTROLLER is disabled: drivers/media/usb/em28xx/em28xx-video.c: In function 'em28xx_v4l2_init': drivers/media/usb/em28xx/em28xx-video.c:2717:38: error: 'struct em28xx' has no member named 'media_dev' This puts the new code inside the same #ifdef that controls the presence of the 'media_dev' member, and that the old code was in. Fixes: de39078779cb ("[media] em2xx: use v4l2_mc_create_media_graph()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx-dvb: create RF connector on DVB-only modeMauro Carvalho Chehab2016-02-16
| | | | | | | | | When in analog mode, the RF connector will be created by em28xx-video. However, when the device is in digital mode only, the RF connector is not shown. In this case, let the DVB core to create it for us. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em2xx: use v4l2_mc_create_media_graph()Mauro Carvalho Chehab2016-02-10
| | | | | | | Now that the core has a function to create the media graph, we can get rid of the specialized code at em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: add media controller supportMauro Carvalho Chehab2016-02-01
| | | | | | | Add the needed bits to make em28xx to create a media controller graph. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: avoid divide by zero errorMauro Carvalho Chehab2016-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | [ 1841.243670] divide error: 0000 [#1] SMP KASAN [ 1841.243994] Modules linked in: em28xx_rc rc_core tda18271 drxk em28xx_dvb dvb_core em28xx_alsa mt9v011 em28xx_v4l videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core em28xx tveeprom v4l2_common videodev media cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats parport_pc ppdev lp parport snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha256_ssse3 sha256_generic hmac drbg i915 snd_hda_codec_realtek snd_hda_codec_generic aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd btusb i2c_algo_bit snd_hda_intel btrtl drm_kms_helper btbcm evdev snd_hda_codec btintel psmouse bluetooth pcspkr snd_hwdep sg drm serio_raw [ 1841.244845] snd_hda_core snd_pcm mei_me rfkill snd_timer mei snd lpc_ich soundcore shpchp i2c_i801 mfd_core battery dw_dmac i2c_designware_platform i2c_designware_core dw_dmac_core video acpi_pad button tpm_tis tpm ext4 crc16 mbcache jbd2 dm_mod hid_generic usbhid sd_mod ahci libahci libata ehci_pci e1000e xhci_pci ptp scsi_mod ehci_hcd xhci_hcd pps_core fan thermal sdhci_acpi sdhci mmc_core i2c_hid hid [last unloaded: tveeprom] [ 1841.245342] CPU: 2 PID: 38 Comm: kworker/2:1 Tainted: G W 4.5.0-rc1+ #43 [ 1841.245413] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [ 1841.245503] Workqueue: events request_module_async [em28xx] [ 1841.245557] task: ffff88009df10000 ti: ffff88009df18000 task.ti: ffff88009df18000 [ 1841.245626] RIP: 0010:[<ffffffffa135a0ad>] [<ffffffffa135a0ad>] size_to_scale+0xed/0x2c0 [em28xx_v4l] [ 1841.245714] RSP: 0018:ffff88009df1faa8 EFLAGS: 00010246 [ 1841.245756] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8803bb933b38 [ 1841.245815] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8803bb933b00 [ 1841.245879] RBP: ffff88009df1fad8 R08: ffff8803bb933b3c R09: 1ffff10077726760 [ 1841.245944] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 1841.246006] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8803b391a130 [ 1841.246071] FS: 0000000000000000(0000) GS:ffff8803c6900000(0000) knlGS:0000000000000000 [ 1841.246141] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1841.246194] CR2: 0000000001d97008 CR3: 00000003bdd85000 CR4: 00000000003406e0 [ 1841.246256] Stack: [ 1841.246278] 0000000000000246 ffff8803bb9321f0 ffff8803bb932270 ffffffffa136f7a0 [ 1841.246359] 0000000000000000 ffff8803bb932130 ffff88009df1fb20 ffffffffa13646a0 [ 1841.246439] ffffffffa127f206 ffff8803bb932130 ffff8803bb932130 ffff8803b391a130 [ 1841.246517] Call Trace: [ 1841.246548] [<ffffffffa13646a0>] em28xx_set_video_format+0x140/0x1e0 [em28xx_v4l] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: unregister devices in case of failureMauro Carvalho Chehab2016-02-01
| | | | | | | | | | If something bad happens during device registration, unregister the already registered devices. Without that, it will have lots of KASAN errors when udev would try to open the devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: remove unused input typesMauro Carvalho Chehab2016-02-01
| | | | | | | | | The em28xx driver have lots of different input types but only 4 of such types are actually used. The others are bogus. Remove them, in order to cleanup the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: fix implementation of s_streamMauro Carvalho Chehab2016-01-26
| | | | | | | | | | | | | | | On em28xx driver, s_stream subdev ops was not implemented properly. It was used only to disable stream, never enabling it. That was the root cause of the regression when we added support for s_stream on tvp5150 driver. With that, we can get rid of the changes on tvp5150 side, e. g. changeset 47de9bf8931e ('[media] tvp5150: Fix breakage for serial usage'). Tested video output on em2820+tvp5150 on WinTV USB2 and video and/or vbi output on em288x+tvp5150 on HVR 950. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung2015-12-18
| | | | | | | | | | | | | | Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] vb2: drop v4l2_format argument from queue_setupHans Verkuil2015-12-18
| | | | | | | | | | | | | | | | | | | | | The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] include/media: move driver interface headers to a separate dirMauro Carvalho Chehab2015-11-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* [media] media: videobuf2: Change queue_setup argumentJunghak Sung2015-10-20
| | | | | | | | | | | | | | | Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: videobuf2: Restructure vb2_bufferJunghak Sung2015-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer. Add new member variables - bytesused, length, offset, userptr, fd, data_offset - to struct vb2_plane in order to cover all information of v4l2_plane. struct vb2_plane { <snip> unsigned int bytesused; unsigned int length; union { unsigned int offset; unsigned long userptr; int fd; } m; unsigned int data_offset; } Replace v4l2_buf with new member variables - index, type, memory - which are common fields for buffer management. struct vb2_buffer { <snip> unsigned int index; unsigned int type; unsigned int memory; unsigned int num_planes; struct vb2_plane planes[VIDEO_MAX_PLANES]; <snip> }; v4l2 specific fields - flags, field, timestamp, timecode, sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c struct vb2_v4l2_buffer { struct vb2_buffer vb2_buf; __u32 flags; __u32 field; struct timeval timestamp; struct v4l2_timecode timecode; __u32 sequence; }; Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: remove dead codeMauro Carvalho Chehab2015-06-05
| | | | | | | As reported by smatch: drivers/media/usb/em28xx/em28xx-video.c:842 get_ressource() info: ignoring unreachable code. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: embed video_deviceHans Verkuil2015-04-08
| | | | | | | | Embed the video_device struct to simplify the error handling and in order to (eventually) get rid of video_device_alloc/release. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx-video: fix missing newlinesRussell King2014-12-23
| | | | | | | | | | | | Inspection shows that newlines are missing from several kernel messages in em28xx-video. Fix these. Fixes: a61f68119af3 ("[media] em28xx-video: implement em28xx_ops: suspend/resume hooks") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: ensure "closing" messages terminate with a newlineRussell King2014-12-23
| | | | | | | | | | | | | | | | | The lockdep splat addressed in a previous commit revealed that at least one message in em28xx-input.c was missing a new line: em28178 #0: Closing input extensionINFO: trying to register non-static key. Further inspection shows several other messages also miss a new line. These will be fixed in a subsequent patch. Fixes: aa929ad783c0 ("[media] em28xx: print a message at disconnect") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: drivers shouldn't touch debug field in video_deviceHans Verkuil2014-12-23
| | | | | | | | | | | | | | | The debug field in struct video_device is for internal use only and drivers should mix that with their own debug module options. It is handled by the V4L2 core and users can set it using /sys/class/video4linux/<devX>/debug. It has been deprecated for some time now, so it is time to remove it completely from the drivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanupsMauro Carvalho Chehab2014-12-04
| | | | | | | | | | | | | | | | | | | This patch is basically produced while testing a tool that Joe Perches sent upstream sometime ago: https://lkml.org/lkml/2014/7/11/794 I used it with those arguments: $ reformat_with_checkpatch.sh drivers/media/usb/em28xx/em28xx*.[ch] It actually produced 24 patches, with is too much, and showed interesting things: gcc produced different codes on most of the patches, even with just linespace changes. The total code data remained the same on all cases I checked though. Anyway, provided that we fold the resulting patches, this tool seems useful. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab2014-10-09
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * patchwork: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ... Conflicts: Documentation/DocBook/media/v4l/compat.xml
| * [media] usb drivers: use %zu instead of %zdMauro Carvalho Chehab2014-09-26
| | | | | | | | | | | | size_t is unsigned. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] em28xx: get rid of field has_audio in struct em28xx_audio_modeFrank Schaefer2014-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Field has_audio in struct em28xx_audio_mode is used together with value EM28XX_NO_AC97 of field ac97 to determine the internal type of audio (none/i2s/ac97). This makes the code difficult to understand: !audio_mode.has_audio && audio_mode.ac97 == EM28XX_NO_AC97 => no audio !audio_mode.has_audio && audio_mode.ac97 != EM28XX_NO_AC97 => BUG audio_mode.has_audio && audio_mode.ac97 == EM28XX_NO_AC97 => AC97 audio audio_mode.has_audio && audio_mode.ac97 != EM28XX_NO_AC97 => I2S audio Simplify the whole thing by introducing an enum em28xx_int_audio_type which describes the internal audio type (none, ac97, i2s) and is hooked directly to the device struct. Then get rid of field has_audio in struct em28xx_audio_mode. A follow-up patch will then remove struct em28xx_ac97_mode and finally the whole struct em28xx_audio_mode. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] em28xx: use true/false for boolean varsMauro Carvalho Chehab2014-09-03
| | | | | | | | | | | | | | Instead of using 0 or 1 for boolean, use the true/false defines. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
| * [media] em28xx-v4l: fix video buffer field order reporting in progressive modeFrank Schaefer2014-08-21
| | | | | | | | | | | | | | | | The correct field order in progressive mode is V4L2_FIELD_NONE, not V4L2_FIELD_INTERLACED. Cc: <stable@vger.kernel.org> Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
| * [media] em28xx-v4l: give back all active video buffers to the vb2 core ↵Frank Schaefer2014-08-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | properly on streaming stop When a new video frame is started, the driver takes the next video buffer from the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf for further processing. On streaming stop we currently only give back the pending buffers from the list but not the ones which are currently processed. This causes the following warning from the vb2 core since kernel 3.15: ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]() [...] Call Trace: [<c0769c46>] dump_stack+0x48/0x69 [<c0245b69>] warn_slowpath_common+0x79/0x90 [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<c0245bfd>] warn_slowpath_null+0x1d/0x20 [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core] [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core] [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core] [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev] [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<c039d0e7>] ? fsnotify+0x1e7/0x2b0 [<f8e49012>] video_ioctl2+0x12/0x20 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev] [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev] [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0 [<c0368eec>] ? vfs_write+0x13c/0x1c0 [<c0369a8f>] ? vfs_writev+0x2f/0x50 [<c0379028>] SyS_ioctl+0x58/0x80 [<c076fff3>] sysenter_do_call+0x12/0x12 ---[ end trace 5545f934409f13f4 ]--- ... Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled this long standing issue and who has investigated it further. Cc: <stable@vger.kernel.org> Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* | [media] em28xx-v4l: get rid of field "users" in struct em28xx_v4l2"Frank Schaefer2014-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 747dba7de2a51a3db58b665ed3bc8c07921546ec. It breaks concurrent vbi and video capturing: While v4l2->users is the number of users of the whole device (all device nodes), v4l2_fh_is_singular() only checks the number of users of a specific device node. As a result. if one device node is open and a second device node is opened (closed), the device is reinitialized (streaming is stopped). Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] em28xx: fix VBI handling logicMauro Carvalho Chehab2014-09-21
|/ | | | | | | | | | | | | | | | When both VBI and video are streaming, and video stream is stopped, a subsequent trial to restart it will fail, because S_FMT will return -EBUSY. That prevents applications like zvbi to work properly. Please notice that, while this fix it fully for zvbi, the best is to get rid of streaming_users and res_get logic as a hole. However, this single-line patch is better to be merged at -stable. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx-v4l: fix disabling ioctl VIDIOC_S_PARM for vbi devicesFrank Schaefer2014-07-26
| | | | | | | | Fixes an old copy+paste bug that has survived all recent code changes in this code area. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx-v4l: get rid of field "users" in struct em28xx_v4l2Frank Schaefer2014-07-26
| | | | | | | | | Instead of counting the number of opened file handles, use function v4l2_fh_is_singular_file() in em28xx_v4l2_open() and em28xx_v4l2_close() to determine if the file handle is the first/last opened one. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx-v4l: simplify em28xx_v4l2_open() by using v4l2_fh_open()Frank Schaefer2014-07-26
| | | | | | | | | | | | | | | | Instead of calling ... struct v4l2_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL); filp->private_data = fh; v4l2_fh_init(fh, vdev); v4l2_fh_add(fh); ... simply use function v4l2_fh_open() which does all of these calls for us. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx-v4l: get rid of struct em28xx_fhFrank Schaefer2014-07-26
| | | | | | | | struct em28xx_fh isn't needed anymore because the only used field which is left is struct v4l2_fh fh. Use struct v4l2_fh directly and remvove struct em28xx_fh. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] media: remove the setting of the flag V4L2_FL_USE_FH_PRIORamakrishnan Muthukrishnan2014-07-04
| | | | | | | | | | | Since all the drivers that use `struct v4l2_fh' use the core priority checking, the setting of the flag in the drivers can be removed. Signed-off-by: Ramakrishnan Muthukrishnan <ramakrmu@cisco.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] v4l: subdev: Move [gs]_std operation to video opsLaurent Pinchart2014-05-24
| | | | | | | | | | | | The g_std and s_std operations are video-related, move them to the video ops where they belong. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx: make em28xx_free_v4l2 static()Mauro Carvalho Chehab2014-05-23
| | | | | | | Changeset 95d2608b88 created this function, but declared it as global, by mistake. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx: remove field tuner_addr from struct em28xxFrank Schaefer2014-05-23
| | | | | | | | | The tuner address is only used by the v4l submodule and at tuner setup and can be obtained from the board data directly (if specified). Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx: remove field tda9887_conf from struct em28xxFrank Schaefer2014-05-23
| | | | | | | | | | | | | | The tda9887 chipset is part of the analog tuner. Move it out of em28xx-cards. Also, it is used only one time by the v4l2 sub-module at tuner setup. With that, we can get rid of an additional data inside the em28xx common structure. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx: move tuner frequency field from struct em28xx to struct v4l2Frank Schaefer2014-05-23
| | | | | | | | Move V4L2-specific frequency cache to struct em28xx_v4l2. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx: move v4l2 user counting fields from struct em28xx to struct v4l2Frank Schaefer2014-05-23
| | | | | | | | | | Despite being at the common em28xx struct, those two fields are actually taking into account only the usage inside em28xx v4l2 submodule. So, move them out of the common struct. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] em28xx: move capture state tracking fields from struct em28xx to ↵Frank Schaefer2014-05-23
| | | | | | | | | | | struct v4l2 Move some temporary capture tracking date to the em28xx_v4l2 struct, as those info are used only by em28xx v4l2 submodule. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-11 02:37:01 +0000