summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
Commit message (Collapse)AuthorAge
* tty: Replace ASYNC_INITIALIZED bit and update atomicallyPeter Hurley2016-04-30
| | | | | | | | | | | | | | Replace ASYNC_INITIALIZED bit in the tty_port::flags field with TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers tty_port_set_initialized() and tty_port_initialized() to abstract atomic bit ops. Note: the transforms for test_and_set_bit() and test_and_clear_bit() are unnecessary as the state transitions are already mutually exclusive; the tty lock prevents concurrent open/close/hangup. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Replace TTY_THROTTLED bit tests with tty_throttled()Peter Hurley2016-04-30
| | | | | | | Abstract TTY_THROTTLED bit tests with tty_throttled(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-serial-4.6-rc3' of ↵Greg Kroah-Hartman2016-04-08
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.6-rc3 Here are some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: option: add "D-Link DWM-221 B1" device idBjørn Mork2016-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: cp210x: Adding GE Healthcare Device IDMartyn Welch2016-04-07
| | | | | | | | | | | | | | | | | | The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devicesJosh Boyer2016-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> CC: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: digi_acceleport: do sanity checking for the number of portsOliver Neukum2016-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | The driver can be crashed with devices that expose crafted descriptors with too few endpoints. See: http://seclists.org/bugtraq/2016/Mar/61 Signed-off-by: Oliver Neukum <ONeukum@suse.com> [johan: fix OOB endpoint check and add error messages ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: cypress_m8: add endpoint sanity checkOliver Neukum2016-03-31
| | | | | | | | | | | | | | | | | | | | | | An attack using missing endpoints exists. CVE-2016-3137 Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: mct_u232: add sanity checking in probeOliver Neukum2016-03-31
|/ | | | | | | | | | | | | An attack using the lack of sanity checking in probe is known. This patch checks for the existence of a second port. CVE-2016-3136 Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org [johan: add error message ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-4.6-rc1' of ↵Linus Torvalds2016-03-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.6-rc1. The normal mess is here, gadget and xhci fixes and updates, and lots of other driver updates and cleanups as well. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits) USB: core: let USB device know device node usb: devio: Add ioctl to disallow detaching kernel USB drivers. usb: gadget: f_acm: Fix configfs attr name usb: udc: lpc32xx: remove USB PLL and USB OTG clock management usb: udc: lpc32xx: remove direct access to clock controller registers usb: udc: lpc32xx: switch to clock prepare/unprepare model usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable() usb: gadget: renesas_usb3: Use ARCH_RENESAS usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma() usb: dwc2: Add support for Lantiq ARX and XRX SoCs usb: phy: generic: Handle late registration of gadget usb: gadget: bdc_udc: fix race condition in bdc_udc_exit() usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config usb: dwc2: Move host-specific core functions into hcd.c usb: dwc2: Move register save and restore functions usb: dwc2: Use kmem_cache_free() usb: dwc2: host: If using uframe scheduler, end splits better usb: dwc2: host: Totally redo the microframe scheduler usb: dwc2: host: Properly set even/odd frame usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call ...
| * Merge tag 'usb-serial-4.6-rc1' of ↵Greg Kroah-Hartman2016-03-08
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.6-rc1 Here are some cp210x register-accessor updates and general usb-serial code clean ups. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: cp210x: add new access functions for large registersKonstantin Shkolnyy2016-02-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cp210x_get_config and cp210x_set_config are cumbersome to use. This change switches large register access to use new block functions. The old functions are removed because now they become unused. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: minor style change ] Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: cp210x: add 8-bit and 32-bit register access functionsKonstantin Shkolnyy2016-02-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: cp210x: add 16-bit register access functionsKonstantin Shkolnyy2016-02-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: fix semicolon.cocci warningsMathieu OTHACEHE2016-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded semicolons. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: fix boolinit.cocci warningsMathieu OTHACEHE2016-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bool initializations should use true and false. Bool tests don't need comparisons. Also, use IS_ENABLED instead of ifdef. Generated by: scripts/coccinelle/misc/boolinit.cocci Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: fix returnvar.cocci warningsMathieu OTHACEHE2016-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded variables when "0" can be returned. Generated by: scripts/coccinelle/misc/returnvar.cocci Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: fix compare_const_fl.cocci warningsMathieu OTHACEHE2016-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move constants to the right of binary operators where it increases readability. Generated by: scripts/coccinelle/misc/compare_const_fl.cocci Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> [johan: drop some chunks and fix others, amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
* | | Merge tag 'tty-4.6-rc1' of ↵Linus Torvalds2016-03-17
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ...
| * \ \ Merge 4.5-rc2 into tty-nextGreg Kroah-Hartman2016-02-01
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | We want the tty/serial fixes in here as well to make merges easier. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | tty: Use termios c_*flag macrosPeter Hurley2016-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expressions of the form "tty->termios.c_*flag & FLAG" are more clearly expressed with the termios flags macros, I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG(). Convert treewide. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | tty: Fix tty_init_termios() declarationPeter Hurley2016-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tty_init_termios() never returns an error; re-declare as void. Remove unnecessary error handling from callers. Remove extern declarations of tty_free_termios() and free_tty_struct() and re-declare in file scope. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | USB: qcserial: add Sierra Wireless EM74xx device IDBjørn Mork2016-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
* | | | Revert "USB: serial: add Moxa UPORT 11x0 driver"Johan Hovold2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0b2b093ad405b56a9e6f4f20a25da77ebfa9549c. Turns out the MOXA vendor driver was basically just a copy of the ti_usb_3410_5052 driver. We don't want two drivers for the same chip even if mxu11x0 had gotten some much needed clean up before merge. So let's remove the mxu11x0 driver, add support for these Moxa devices to the TI driver, and then clean that driver up instead. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | USB: serial: option: add support for Quectel UC20Yegor Yefremov2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Quectel UC20 and blacklist the QMI interface. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: stable <stable@vger.kernel.org> [johan: amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
* | | | USB: serial: option: add support for Telit LE922 PID 0x1045Daniele Palmas2016-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for 0x1045 PID of Telit LE922. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | | | USB: cp210x: Add ID for Parrot NMEA GPS Flight RecorderVittorio Alfieri2016-02-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Parrot NMEA GPS Flight Recorder is a USB composite device consisting of hub, flash storage, and cp210x usb to serial chip. It is an accessory to the mass-produced Parrot AR Drone 2. The device emits standard NMEA messages which make the it compatible with NMEA compatible software. It was tested using gpsd version 3.11-3 as an NMEA interpreter and using the official Parrot Flight Recorder. Signed-off-by: Vittorio Alfieri <vittorio88@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | | | USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)Patrik Halfar2016-02-29
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New revision of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card has new idProduct. Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b3 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi™ 4G HSPA+ Mobile Broadband Card iSerial 3 bNumConfigurations 2 Signed-off-by: Patrik Halfar <patrik_halfar@halfarit.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | | USB: option: add "4G LTE usb-modem U901"Bjørn Mork2016-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Cc: <stable@vger.kernel.org> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
* | | USB: cp210x: add IDs for GE B650V3 and B850V3 boardsKen Lin2016-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add USB ID for cp2104/5 devices on GE B650v3 and B850v3 boards. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | | USB: option: add support for SIM7100EAndrey Skvortsov2016-02-18
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | $ lsusb: Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option $ usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2 P: Vendor=1e0e ProdID=9001 Rev= 2.32 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) The last interface (6) is used for Android Composite ADB interface. Serial port layout: 0: QCDM/DIAG 1: NMEA 2: AT 3: AT/PPP 4: audio Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: option: fix Cinterion AHxx enumerationJohn Ernberg2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: John Ernberg <john.ernberg@actia.se> Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...") Cc: stable <stable@vger.kernel.org> # v3.9: 8ff10bdb14a52 Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: mxu11x0: fix memory leak on usb_serial private dataMathieu OTHACEHE2016-01-25
| | | | | | | | | | | | | | | | | | On nominal execution, private data allocated on port_probe and attach are never freed. Add port_remove and release callbacks to free them respectively. Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: serial: ftdi_sio: add support for Yaesu SCU-18 cableGreg Kroah-Hartman2016-01-25
| | | | | | | | | | | | | | | | | | | | | | Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden <harald.linden@7183.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: serial: option: Adding support for Telit LE922Daniele Palmas2016-01-25
| | | | | | | | | | | | | | | | This patch adds support for two PIDs of LE922. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: serial: visor: fix crash on detecting device without write_urbsVladis Dronov2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: visor: fix null-deref at probeJohan Hovold2016-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | USB: cp210x: add ID for IAI USB to RS485 adaptorPeter Dedecker2016-01-25
|/ | | | | | | | | Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* Merge tag 'usb-serial-4.4-rc8' of ↵Greg Kroah-Hartman2016-01-03
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial fixes for v4.4-rc8 Here's another device id for cp210x. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: cp210x: add ID for ELV Marble Sound Board 1Oliver Freyermuth2015-12-28
| | | | | | | | | | | | | | | | Add the USB device ID for ELV Marble Sound Board 1. Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | Merge tag 'usb-serial-4.5-rc1' of ↵Greg Kroah-Hartman2016-01-03
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v4.5-rc1 These updates add support for Moxa UPort 1100-series devices through a new mxu11x0 driver. The cp210x driver gains proper support for cp2108 devices by working around a couple of firmware bugs, and generic wait-until-sent support (e.g. for tcdrain) is also added. Included are also some general clean ups. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: mxu11x0: drop redundant function name from error messagesJohan Hovold2015-12-29
| | | | | | | | | | | | | | Drop redundant function name from a few error messages. Drop redundant error message when generic open fails. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: mxu11x0: fix debug-message typosJohan Hovold2015-12-29
| | | | | | | | | | | | Fix a couple of debug-message typos, and do some minor clean ups. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: mxu11x0: rename usb-serial driverJohan Hovold2015-12-29
| | | | | | | | | | | | Rename the usb-serial driver "mxu11x0" to match the USB driver name. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: mxu11x0: fix modem-control handling on B0-transitionsJohan Hovold2015-12-29
| | | | | | | | | | | | | | Make sure to raise DTR and RTS on transitions from B0 and leave the other bits unchanged. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: mxu11x0: fix memory leak on firmware downloadJohan Hovold2015-12-29
| | | | | | | | | | | | | | | | | | Make sure to release the private data before returning -ENODEV after having downloaded the firmware during first probe. Clean up the error paths while at it. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: mxu11x0: fix memory leak in port-probe error pathJohan Hovold2015-12-29
| | | | | | | | | | | | | | Fix memory leak in port-probe error path by verifying the interrupt-in urb before allocating the private data. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: add Moxa UPORT 11x0 driverMathieu OTHACEHE2015-12-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver which supports : - UPort 1110 : 1 port RS-232 USB to Serial Hub. - UPort 1130 : 1 port RS-422/485 USB to Serial Hub. - UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation. - UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub. - UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation. This driver is based on GPL MOXA driver written by Hen Huang and available on MOXA website. The original driver was based on io_ti serial driver. Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: mos7840: remove redundant conditionGeyslan G. Bem2015-12-11
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes redundant condition. (length && length > 5) can be reduced to a single evaluation. Tested by compilation only. Caught by cppcheck. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: io_edgeport: remove redundant conditionsGeyslan G. Bem2015-12-11
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes redundant conditions. (!A || (A && B)) is the same as (!A || B). Tested by compilation only. Caught by cppcheck. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.1 (git 2.18.0) at 2024-10-04 08:41:54 +0000