From 269e2d77b82d92d8dad543a2375e74372e9d773e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 8 Nov 2010 16:27:12 -0500 Subject: libipw: fix proc entry removal This bug seems to be due to commit 27ae60f8f7aac ("ipw2x00: replace "ieee80211" with "libipw" where appropriate"), where Pavel did this: - libipw_proc = proc_mkdir(DRV_NAME, init_net.proc_net); + libipw_proc = proc_mkdir("ieee80211", init_net.proc_net); but then the cleanup was kept as remove_proc_entry(DRV_NAME, init_net.proc_net); in both places (both in the failure case and in the unload case). The error string is also total crap, and says "Unable to create " DRV_NAME " proc directory\n"); Even though it doesn't actually create a proc directory named DRV_NAME at all. So that patch looks like total and utter crap to me. The commit message says "Keep /proc/net/ieee80211 under the original name to avoid breaking user interface." but the thing is, it really didn't fix anything but that one create thing. It needs to fix all the other cases too. Signed-off-by: Linus Torvalds Tested-by: Randy Dunlap Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/libipw_module.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index 32dee2ce5d31..d5ef696298ee 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -54,6 +54,7 @@ #define DRV_DESCRIPTION "802.11 data/management/control stack" #define DRV_NAME "libipw" +#define DRV_PROCNAME "ieee80211" #define DRV_VERSION LIBIPW_VERSION #define DRV_COPYRIGHT "Copyright (C) 2004-2005 Intel Corporation " @@ -293,16 +294,16 @@ static int __init libipw_init(void) struct proc_dir_entry *e; libipw_debug_level = debug; - libipw_proc = proc_mkdir("ieee80211", init_net.proc_net); + libipw_proc = proc_mkdir(DRV_PROCNAME, init_net.proc_net); if (libipw_proc == NULL) { - LIBIPW_ERROR("Unable to create " DRV_NAME + LIBIPW_ERROR("Unable to create " DRV_PROCNAME " proc directory\n"); return -EIO; } e = proc_create("debug_level", S_IRUGO | S_IWUSR, libipw_proc, &debug_level_proc_fops); if (!e) { - remove_proc_entry(DRV_NAME, init_net.proc_net); + remove_proc_entry(DRV_PROCNAME, init_net.proc_net); libipw_proc = NULL; return -EIO; } @@ -319,7 +320,7 @@ static void __exit libipw_exit(void) #ifdef CONFIG_LIBIPW_DEBUG if (libipw_proc) { remove_proc_entry("debug_level", libipw_proc); - remove_proc_entry(DRV_NAME, init_net.proc_net); + remove_proc_entry(DRV_PROCNAME, init_net.proc_net); libipw_proc = NULL; } #endif /* CONFIG_LIBIPW_DEBUG */ -- cgit v1.2.1 From 5f841b4130a639e5f0fbcf4a9b26045d734e4ee6 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 27 Oct 2010 18:31:15 +0530 Subject: ath9k: Avoid HW opmode overridden on monitor mode changes The HW opmode is blindly set to monitor type on monitor mode change notification. This overrides the opmode when one of the interfaces is still running as non-monitor iftype. So the monitoring information needs to be maintained seperately. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 14 ++++++++++++-- drivers/net/wireless/ath/ath9k/hw.h | 1 + drivers/net/wireless/ath/ath9k/main.c | 12 ++++++++---- drivers/net/wireless/ath/ath9k/recv.c | 4 ++-- 4 files changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index cc13ee117823..c3a49045986d 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -952,9 +952,12 @@ static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode) REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION); break; case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_MONITOR: REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE); break; + default: + if (ah->is_monitoring) + REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE); + break; } } @@ -1634,7 +1637,6 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period) switch (ah->opmode) { case NL80211_IFTYPE_STATION: - case NL80211_IFTYPE_MONITOR: REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon)); REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff); REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff); @@ -1663,6 +1665,14 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period) AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN; break; default: + if (ah->is_monitoring) { + REG_WRITE(ah, AR_NEXT_TBTT_TIMER, + TU_TO_USEC(next_beacon)); + REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff); + REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff); + flags |= AR_TBTT_TIMER_EN; + break; + } ath_print(ath9k_hw_common(ah), ATH_DBG_BEACON, "%s: unsupported opmode: %d\n", __func__, ah->opmode); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index d032939768b0..d47d1b4b6002 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -622,6 +622,7 @@ struct ath_hw { bool sw_mgmt_crypto; bool is_pciexpress; + bool is_monitoring; bool need_an_top2_fixup; u16 tx_trig_level; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index b52f1cf8a603..cf6fa54a2fa3 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1217,6 +1217,7 @@ static int ath9k_start(struct ieee80211_hw *hw) ah->imask |= ATH9K_INT_CST; sc->sc_flags &= ~SC_OP_INVALID; + sc->sc_ah->is_monitoring = false; /* Disable BMISS interrupt when we're not associated */ ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); @@ -1493,8 +1494,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, ath9k_hw_set_interrupts(ah, ah->imask); if (vif->type == NL80211_IFTYPE_AP || - vif->type == NL80211_IFTYPE_ADHOC || - vif->type == NL80211_IFTYPE_MONITOR) { + vif->type == NL80211_IFTYPE_ADHOC) { sc->sc_flags |= SC_OP_ANI_RUN; ath_start_ani(common); } @@ -1644,8 +1644,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) if (changed & IEEE80211_CONF_CHANGE_MONITOR) { if (conf->flags & IEEE80211_CONF_MONITOR) { ath_print(common, ATH_DBG_CONFIG, - "HW opmode set to Monitor mode\n"); - sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR; + "Monitor mode is enabled\n"); + sc->sc_ah->is_monitoring = true; + } else { + ath_print(common, ATH_DBG_CONFIG, + "Monitor mode is disabled\n"); + sc->sc_ah->is_monitoring = false; } } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index fddb0129bb57..c76ea53c20ce 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -441,7 +441,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc) */ if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) && (sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) || - (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR)) + (sc->sc_ah->is_monitoring)) rfilt |= ATH9K_RX_FILTER_PROM; if (sc->rx.rxfilter & FIF_CONTROL) @@ -897,7 +897,7 @@ static bool ath9k_rx_accept(struct ath_common *common, * decryption and MIC failures. For monitor mode, * we also ignore the CRC error. */ - if (ah->opmode == NL80211_IFTYPE_MONITOR) { + if (ah->is_monitoring) { if (rx_stats->rs_status & ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC | ATH9K_RXERR_CRC)) -- cgit v1.2.1 From 10598c124ecabbbfd7522f74de19b8f7d52a1bee Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Sat, 30 Oct 2010 22:05:13 +0530 Subject: ath9k: Fix a DMA latency issue for Intel Pinetrail platforms. Throughput was severely affected in Intel Pinetrail platforms because of a DMA problem in C3 state. This patch fixes this issue. Signed-off-by: Vivek Natarajan CC: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 + drivers/net/wireless/ath/ath9k/init.c | 8 ++++++++ drivers/net/wireless/ath/ath9k/main.c | 5 +++++ 3 files changed, 14 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 9b8e7e3fcebd..170d44a35ccb 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -675,6 +675,7 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) } extern struct ieee80211_ops ath9k_ops; +extern struct pm_qos_request_list ath9k_pm_qos_req; extern int modparam_nohwcrypt; extern int led_blink; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 95b41db0d86b..6a0d99eff404 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -15,6 +15,7 @@ */ #include +#include #include "ath9k.h" @@ -179,6 +180,8 @@ static const struct ath_ops ath9k_common_ops = { .write = ath9k_iowrite32, }; +struct pm_qos_request_list ath9k_pm_qos_req; + /**************************/ /* Initialization */ /**************************/ @@ -756,6 +759,9 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); + pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + PM_QOS_DEFAULT_VALUE); + return 0; error_world: @@ -811,6 +817,8 @@ void ath9k_deinit_device(struct ath_softc *sc) ath9k_ps_wakeup(sc); + pm_qos_remove_request(&ath9k_pm_qos_req); + wiphy_rfkill_stop_polling(sc->hw->wiphy); ath_deinit_leds(sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index cf6fa54a2fa3..09dcdd7882e6 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -15,6 +15,7 @@ */ #include +#include #include "ath9k.h" #include "btcoex.h" @@ -1239,6 +1240,8 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } + pm_qos_update_request(&ath9k_pm_qos_req, 55); + mutex_unlock: mutex_unlock(&sc->mutex); @@ -1416,6 +1419,8 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; + pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE); + mutex_unlock(&sc->mutex); ath_print(common, ATH_DBG_CONFIG, "Driver halt\n"); -- cgit v1.2.1 From 8df86db9060ddd123d172c7adb6b2b71f31e77cd Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 30 Oct 2010 19:46:37 +0200 Subject: carl9170: usbid table updates This patch includes the following updates: * add D-Link DWA-130 Rev D * Netgear has three WNDA3100 versions. the original WNDA3100 is now called WNDA3100v1. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/usb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index d8607f4c144d..3317039cd28f 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -82,9 +82,11 @@ static struct usb_device_id carl9170_usb_ids[] = { { USB_DEVICE(0x07d1, 0x3c10) }, /* D-Link DWA 160 A2 */ { USB_DEVICE(0x07d1, 0x3a09) }, + /* D-Link DWA 130 D */ + { USB_DEVICE(0x07d1, 0x3a0f) }, /* Netgear WNA1000 */ { USB_DEVICE(0x0846, 0x9040) }, - /* Netgear WNDA3100 */ + /* Netgear WNDA3100 (v1) */ { USB_DEVICE(0x0846, 0x9010) }, /* Netgear WN111 v2 */ { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED }, -- cgit v1.2.1 From 3cc25e510dfc36dc62ee0aa87344b36ed7c1742a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 31 Oct 2010 15:31:54 +0100 Subject: cfg80211: fix a crash in dev lookup on dump commands IS_ERR and PTR_ERR were called with the wrong pointer, leading to a crash when cfg80211_get_dev_from_ifindex fails. Signed-off-by: Felix Fietkau Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c506241f8637..4e78e3f26798 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -224,8 +224,8 @@ static int nl80211_prepare_netdev_dump(struct sk_buff *skb, } *rdev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx); - if (IS_ERR(dev)) { - err = PTR_ERR(dev); + if (IS_ERR(*rdev)) { + err = PTR_ERR(*rdev); goto out_rtnl; } -- cgit v1.2.1 From fbb078fcd2fa83646ad9504d8e4c54a67b8729ae Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 3 Nov 2010 01:36:51 +0100 Subject: ath9k: check old power mode before clearing cycle counters ath9k_ps_wakeup() clears the cycle counters after waking up the hardware using ath9k_hw_setpower, however if power save is disabled, then the counters will contain useful data, which then gets discarded. Fix this by checking the old power mode before discarding any data. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 09dcdd7882e6..25d3ef4c338e 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -94,11 +94,13 @@ void ath9k_ps_wakeup(struct ath_softc *sc) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); unsigned long flags; + enum ath9k_power_mode power_mode; spin_lock_irqsave(&sc->sc_pm_lock, flags); if (++sc->ps_usecount != 1) goto unlock; + power_mode = sc->sc_ah->power_mode; ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); /* @@ -106,10 +108,12 @@ void ath9k_ps_wakeup(struct ath_softc *sc) * useful data. Better clear them now so that they don't mess up * survey data results. */ - spin_lock(&common->cc_lock); - ath_hw_cycle_counters_update(common); - memset(&common->cc_survey, 0, sizeof(common->cc_survey)); - spin_unlock(&common->cc_lock); + if (power_mode != ATH9K_PM_AWAKE) { + spin_lock(&common->cc_lock); + ath_hw_cycle_counters_update(common); + memset(&common->cc_survey, 0, sizeof(common->cc_survey)); + spin_unlock(&common->cc_lock); + } unlock: spin_unlock_irqrestore(&sc->sc_pm_lock, flags); -- cgit v1.2.1 From 352ffad646c0e0c5cf9ae8cea99710ee0d66ee27 Mon Sep 17 00:00:00 2001 From: Brian Cavagnolo Date: Thu, 4 Nov 2010 16:59:28 -0700 Subject: mac80211: unset SDATA_STATE_OFFCHANNEL when cancelling a scan For client STA interfaces, ieee80211_do_stop unsets the relevant interface's SDATA_STATE_RUNNING state bit prior to cancelling an interrupted scan. When ieee80211_offchannel_return is invoked as part of cancelling the scan, it doesn't bother unsetting the SDATA_STATE_OFFCHANNEL bit because it sees that the interface is down. Normally this doesn't matter because when the client STA interface is brought back up, it will probably issue a scan. But in some cases (e.g., the user changes the interface type while it is down), the SDATA_STATE_OFFCHANNEL bit will remain set. This prevents the interface queues from being started. So we cancel the scan before unsetting the SDATA_STATE_RUNNING bit. Signed-off-by: Brian Cavagnolo Signed-off-by: John W. Linville --- net/mac80211/iface.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index f9163b12c7f1..7aa85591dbe7 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -391,6 +391,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, u32 hw_reconf_flags = 0; int i; + if (local->scan_sdata == sdata) + ieee80211_scan_cancel(local); + clear_bit(SDATA_STATE_RUNNING, &sdata->state); /* @@ -523,9 +526,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, synchronize_rcu(); skb_queue_purge(&sdata->skb_queue); - if (local->scan_sdata == sdata) - ieee80211_scan_cancel(local); - /* * Disable beaconing here for mesh only, AP and IBSS * are already taken care of. -- cgit v1.2.1 From 2e30168ba7dba95710aaadf12b2a97163df067b1 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 4 Nov 2010 21:21:52 +0000 Subject: libertas: terminate scan when stopping interface There are currently no provisions in place to ensure that the scanning task has been stopped when the interface is stopped or removed. This can result in a WARNING at net/wireless/core.c:643 and other badness when you remove the module while a scan is happening. Terminate the scanning task during interface stop. Signed-off-by: Daniel Drake Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cfg.c | 5 +++-- drivers/net/wireless/libertas/dev.h | 1 + drivers/net/wireless/libertas/main.c | 7 +++++++ 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 5046a0005034..373930afc26b 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -700,8 +700,9 @@ static void lbs_scan_worker(struct work_struct *work) if (priv->scan_channel < priv->scan_req->n_channels) { cancel_delayed_work(&priv->scan_work); - queue_delayed_work(priv->work_thread, &priv->scan_work, - msecs_to_jiffies(300)); + if (!priv->stopping) + queue_delayed_work(priv->work_thread, &priv->scan_work, + msecs_to_jiffies(300)); } /* This is the final data we are about to send */ diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h index f062ed583901..cb14c38caf3a 100644 --- a/drivers/net/wireless/libertas/dev.h +++ b/drivers/net/wireless/libertas/dev.h @@ -36,6 +36,7 @@ struct lbs_private { /* CFG80211 */ struct wireless_dev *wdev; bool wiphy_registered; + bool stopping; struct cfg80211_scan_request *scan_req; u8 assoc_bss[ETH_ALEN]; u8 disassoc_reason; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 47ce5a6ba120..46b88b118c99 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -104,6 +104,7 @@ static int lbs_dev_open(struct net_device *dev) lbs_deb_enter(LBS_DEB_NET); spin_lock_irq(&priv->driver_lock); + priv->stopping = false; if (priv->connect_status == LBS_CONNECTED) netif_carrier_on(dev); @@ -131,10 +132,16 @@ static int lbs_eth_stop(struct net_device *dev) lbs_deb_enter(LBS_DEB_NET); spin_lock_irq(&priv->driver_lock); + priv->stopping = true; netif_stop_queue(dev); spin_unlock_irq(&priv->driver_lock); schedule_work(&priv->mcast_work); + cancel_delayed_work_sync(&priv->scan_work); + if (priv->scan_req) { + cfg80211_scan_done(priv->scan_req, false); + priv->scan_req = NULL; + } lbs_deb_leave(LBS_DEB_NET); return 0; -- cgit v1.2.1 From f119da3015712dc32bdf1c311652479e02dcb49a Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Thu, 4 Nov 2010 17:41:25 -0700 Subject: ath9k_hw: Fix AR9280 surprise removal during frequent idle on/off Bit 22 of AR_WA should be set to fix the situation where chip reset is asynchronous to clock of analog shift registers, such that when reset is released, it could mess up the values of analog shift registers and cause some hw issue on AR9280. This bit is write only, but the driver does a read-modify-write on AR_WA without setting bit 22 in ar9002_hw_configpcipowersave() during radio disable. This causes surprise removal of hw. It can never recover from this state and the hw will become usable only after a power on/off cycle, and sometimes only during a cold reboot. This issue can be triggered by doing frequent roaming with the simple/test-roam script available from the wifi-test project [1] when roaming between APs quickly. When roaming there is a is a high possibility that the device being put into idle (radio disable) state by mac80211 during AUTH->ASSOC. A device hardware reset would fail and the kernel would output: [40251.363799] ath: AWAKE -> FULL-SLEEP [40251.363815] ieee80211 phy17: device no longer idle - working [40251.363817] ath: Marking phy17 as not-idle [40251.363819] ath: FULL-SLEEP -> AWAKE [40251.415978] pciehp 0000:00:1c.3:pcie04: Card not present on Slot(3) [40251.419896] ath: ah->misc_mode 0x4 [40251.428138] pciehp 0000:00:1c.3:pcie04: Card present on Slot(3) [40251.532247] ath: timeout (100000 us) on reg 0x9860: 0xffffffff & 0x00000001 != 0x00000000 [40251.532250] ath: Unable to reset channel (2462 MHz), reset status -5 [40251.532422] ath: Set channel: 5745 MHz [40251.540639] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.548826] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.557023] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.565211] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.573415] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.581603] ath: Failed to stop TX DMA in 100 msec after killing last frame [40251.581606] ath: Failed to stop TX DMA. Resetting hardware! [40251.592679] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff [40251.703330] ath: timeout (100000 us) on reg 0x7000: 0xffffffff & 0x00000003 != 0x00000000 [40251.703333] ath: RTC stuck in MAC reset [40251.703334] ath: Chip reset failed [40251.703335] ath: Unable to reset hardware; reset status -22 This is currently only reproducible with some HB92 (Half Mini-PCIE) cards but the fix applies to all AR9280 cards. This patch fixes this issue by setting bit 22 during radio disable. This patch has fixes for all kernels that has ath9k. [1] http://wireless.kernel.org/en/developers/Testing/wifi-test Cc: kyungwan.nam@atheros.com Cc: amod.bodas@atheros.com Cc: david.quan@atheros.com Cc: stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_hw.c | 3 +++ drivers/net/wireless/ath/ath9k/reg.h | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index a0471f2e1c7a..48261b7252d0 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -410,6 +410,9 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, val &= ~(AR_WA_BIT6 | AR_WA_BIT7); } + if (AR_SREV_9280(ah)) + val |= AR_WA_BIT22; + if (AR_SREV_9285E_20(ah)) val |= AR_WA_BIT23; diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 42976b0a01c1..fa05b711e5cd 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -703,6 +703,7 @@ #define AR_WA_RESET_EN (1 << 18) /* Sw Control to enable PCI-Reset to POR (bit 15) */ #define AR_WA_ANALOG_SHIFT (1 << 20) #define AR_WA_POR_SHORT (1 << 21) /* PCI-E Phy reset control */ +#define AR_WA_BIT22 (1 << 22) #define AR9285_WA_DEFAULT 0x004a050b #define AR9280_WA_DEFAULT 0x0040073b #define AR_WA_DEFAULT 0x0000073f -- cgit v1.2.1 From ac618d70aeb681df7b77c1107fdf26f3249f855f Mon Sep 17 00:00:00 2001 From: Haitao Zhang Date: Sun, 7 Nov 2010 12:50:24 +0800 Subject: ath9k_htc: Add support for device ID 3346 This patch adds support for USB dongle with device ID 3346 from IMC Networks. Signed-off-by: Haitao Zhang Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 6576f683dba0..2f6b1e9f0aee 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -35,6 +35,7 @@ static struct usb_device_id ath9k_hif_usb_ids[] = { { USB_DEVICE(0x07D1, 0x3A10) }, /* Dlink Wireless 150 */ { USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */ { USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */ + { USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */ { USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */ { USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */ { }, -- cgit v1.2.1 From 490b3f4eacab3220383d2db49255a73995ecdf25 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 8 Nov 2010 12:49:12 +0530 Subject: ath9k_htc: Fix probe failure if CONFIG_USB_DEBUG enabled Since the endpoint descriptors (EP3 & EP4) were changed from Interrupt to Bulk type by firmware, the urb submission done on Bulk pipes. And the recent commit "check the endpoint type against the pipe type" added aditional error checking against pipe types under CONFIG_USB_DEBUG. So bmAttribute has to be updated for both EP3 & EP4 before submitting urbs on that pipe. This patch resolves the following failure. [ 2215.710936] usb 1-1: usb_probe_device [ 2215.710945] usb 1-1: configuration #1 chosen from 1 choice [ 2215.711152] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 2215.711252] ath9k_hif_usb 1-1:1.0: usb_probe_interface [ 2215.711255] ath9k_hif_usb 1-1:1.0: usb_probe_interface - got id [ 2215.712780] usb 1-1: BOGUS urb xfer, pipe 3 != type 1 [ 2215.713782] usb 1-1: ath9k_htc: Unable to allocate URBs [ 2215.713801] ath9k_hif_usb: probe of 1-1:1.0 failed with error -22 Reported-by: Ming Lei Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 30 ++++++++++++++---------------- 1 file changed, 14 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 2f6b1e9f0aee..f7ec31b4ddd3 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -541,11 +541,11 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) return; } - usb_fill_int_urb(urb, hif_dev->udev, + usb_fill_bulk_urb(urb, hif_dev->udev, usb_rcvbulkpipe(hif_dev->udev, USB_REG_IN_PIPE), nskb->data, MAX_REG_IN_BUF_SIZE, - ath9k_hif_usb_reg_in_cb, nskb, 1); + ath9k_hif_usb_reg_in_cb, nskb); ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret) { @@ -721,11 +721,11 @@ static int ath9k_hif_usb_alloc_reg_in_urb(struct hif_device_usb *hif_dev) if (!skb) goto err; - usb_fill_int_urb(hif_dev->reg_in_urb, hif_dev->udev, + usb_fill_bulk_urb(hif_dev->reg_in_urb, hif_dev->udev, usb_rcvbulkpipe(hif_dev->udev, USB_REG_IN_PIPE), skb->data, MAX_REG_IN_BUF_SIZE, - ath9k_hif_usb_reg_in_cb, skb, 1); + ath9k_hif_usb_reg_in_cb, skb); if (usb_submit_urb(hif_dev->reg_in_urb, GFP_KERNEL) != 0) goto err; @@ -844,14 +844,6 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev) goto err_fw_req; } - /* Alloc URBs */ - ret = ath9k_hif_usb_alloc_urbs(hif_dev); - if (ret) { - dev_err(&hif_dev->udev->dev, - "ath9k_htc: Unable to allocate URBs\n"); - goto err_urb; - } - /* Download firmware */ ret = ath9k_hif_usb_download_fw(hif_dev); if (ret) { @@ -867,16 +859,22 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev) */ for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) { endp = &alt->endpoint[idx].desc; - if (((endp->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - == 0x04) && - ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT)) { + if ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT) { endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK; endp->bmAttributes |= USB_ENDPOINT_XFER_BULK; endp->bInterval = 0; } } + /* Alloc URBs */ + ret = ath9k_hif_usb_alloc_urbs(hif_dev); + if (ret) { + dev_err(&hif_dev->udev->dev, + "ath9k_htc: Unable to allocate URBs\n"); + goto err_urb; + } + return 0; err_fw_download: -- cgit v1.2.1 From 48a7c3df14d0cda850337a9b3f9e667a0b12a996 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 8 Nov 2010 20:40:53 +0530 Subject: ath9k_hw: Fix memory leak on ath9k_hw_rf_alloc_ext_banks failure The allocated externel radio banks have to be freed in case of ath9k_hw_rf_alloc_ext_banks failure. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index c3a49045986d..6ebc68bca91f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -484,6 +484,7 @@ static int ath9k_hw_post_init(struct ath_hw *ah) ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL, "Failed allocating banks for " "external radio\n"); + ath9k_hw_rf_free_ext_banks(ah); return ecode; } -- cgit v1.2.1 From 96c99b473a8531188e2f6106c6ef0e33bb4500f2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 13 Oct 2010 18:16:52 -0700 Subject: Bluetooth: fix hidp kconfig dependency warning Fix kconfig dependency warning to satisfy dependencies: warning: (BT_HIDP && NET && BT && BT_L2CAP && INPUT || USB_HID && HID_SUPPORT && USB && INPUT) selects HID which has unmet direct dependencies (HID_SUPPORT && INPUT) Signed-off-by: Randy Dunlap Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hidp/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig index 98fdfa1fbddd..86a91543172a 100644 --- a/net/bluetooth/hidp/Kconfig +++ b/net/bluetooth/hidp/Kconfig @@ -1,6 +1,6 @@ config BT_HIDP tristate "HIDP protocol support" - depends on BT && BT_L2CAP && INPUT + depends on BT && BT_L2CAP && INPUT && HID_SUPPORT select HID help HIDP (Human Interface Device Protocol) is a transport layer -- cgit v1.2.1 From bdb7524a75e4716535a29abb314a82619301e068 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 15 Oct 2010 10:46:09 +0300 Subject: Bluetooth: Fix non-SSP auth request for HIGH security level sockets When initiating dedicated bonding a L2CAP raw socket with HIGH security level is used. The kernel is supposed to trigger the authentication request in this case but this doesn't happen currently for non-SSP (pre-2.1) devices. The reason is that the authentication request happens in the remote extended features callback which never gets called for non-SSP devices. This patch fixes the issue by requesting also authentiation in the (normal) remote features callback in the case of non-SSP devices. This rule is applied only for HIGH security level which might at first seem unintuitive since on the server socket side MEDIUM is already enough for authentication. However, for the clients we really want to prefer the server side to decide the authentication requrement in most cases, and since most client sockets use MEDIUM it's better to be avoided on the kernel side for these sockets. The important socket to request it for is the dedicated bonding one and that socket uses HIGH security level. The patch is based on the initial investigation and patch proposal from Andrei Emeltchenko . Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hci_event.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index bfef5bae0b3a..84093b0000b9 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1175,6 +1175,12 @@ static inline void hci_remote_features_evt(struct hci_dev *hdev, struct sk_buff hci_send_cmd(hdev, HCI_OP_READ_REMOTE_EXT_FEATURES, sizeof(cp), &cp); + } else if (!ev->status && conn->out && + conn->sec_level == BT_SECURITY_HIGH) { + struct hci_cp_auth_requested cp; + cp.handle = ev->handle; + hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, + sizeof(cp), &cp); } else { conn->state = BT_CONNECTED; hci_proto_connect_cfm(conn, ev->status); -- cgit v1.2.1 From 556ea928f78a390fe16ae584e6433dff304d3014 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 16 Sep 2010 13:58:15 -0400 Subject: Bluetooth: Enable USB autosuspend by default on btusb We've done this for a while in Fedora without any obvious problems other than some interaction with input devices. Those should be fixed now, so let's try this in mainline. Signed-off-by: Matthew Garrett Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index d120a5c1c093..b2f288459317 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1029,6 +1029,8 @@ static int btusb_probe(struct usb_interface *intf, usb_set_intfdata(intf, data); + usb_enable_autosuspend(interface_to_usbdev(intf)); + return 0; } -- cgit v1.2.1 From bfaaeb3ed5533a2dd38e3aa9ea43efd619690aed Mon Sep 17 00:00:00 2001 From: steven miao Date: Sat, 16 Oct 2010 18:29:47 -0400 Subject: Bluetooth: fix unaligned access to l2cap conf data In function l2cap_get_conf_opt() and l2cap_add_conf_opt() the address of opt->val sometimes is not at the edge of 2-bytes/4-bytes, so 2-bytes/4 bytes access will cause data misalignment exeception. Use get_unaligned_le16/32 and put_unaligned_le16/32 function to avoid data misalignment execption. Signed-off-by: steven miao Signed-off-by: Mike Frysinger Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index daa7a988d9a6..b3fb02ab2292 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2421,11 +2421,11 @@ static inline int l2cap_get_conf_opt(void **ptr, int *type, int *olen, unsigned break; case 2: - *val = __le16_to_cpu(*((__le16 *) opt->val)); + *val = get_unaligned_le16(opt->val); break; case 4: - *val = __le32_to_cpu(*((__le32 *) opt->val)); + *val = get_unaligned_le32(opt->val); break; default: @@ -2452,11 +2452,11 @@ static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val) break; case 2: - *((__le16 *) opt->val) = cpu_to_le16(val); + put_unaligned_le16(cpu_to_le16(val), opt->val); break; case 4: - *((__le32 *) opt->val) = cpu_to_le32(val); + put_unaligned_le32(cpu_to_le32(val), opt->val); break; default: -- cgit v1.2.1 From 4f8b691c9fb02e72359e71592098c1de3b8ec712 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Mon, 18 Oct 2010 14:25:53 -0200 Subject: Bluetooth: fix endianness conversion in L2CAP Last commit added a wrong endianness conversion. Fixing that. Reported-by: Harvey Harrison Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index b3fb02ab2292..cd8f6ea03841 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2452,11 +2452,11 @@ static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val) break; case 2: - put_unaligned_le16(cpu_to_le16(val), opt->val); + put_unaligned_le16(val, opt->val); break; case 4: - put_unaligned_le32(cpu_to_le32(val), opt->val); + put_unaligned_le32(val, opt->val); break; default: -- cgit v1.2.1 From 63ce0900d79645c714de6c8b66d8040670068c9e Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Thu, 19 Aug 2010 14:06:10 +0300 Subject: Bluetooth: fix not setting security level when creating a rfcomm session This cause 'No Bonding' to be used if userspace has not yet been paired with remote device since the l2cap socket used to create the rfcomm session does not have any security level set. Signed-off-by: Luiz Augusto von Dentz Acked-by: Ville Tervo Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/rfcomm/core.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 39a5d87e33b4..fa642aa652bd 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -79,7 +79,10 @@ static void rfcomm_make_uih(struct sk_buff *skb, u8 addr); static void rfcomm_process_connect(struct rfcomm_session *s); -static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err); +static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, + bdaddr_t *dst, + u8 sec_level, + int *err); static struct rfcomm_session *rfcomm_session_get(bdaddr_t *src, bdaddr_t *dst); static void rfcomm_session_del(struct rfcomm_session *s); @@ -401,7 +404,7 @@ static int __rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst, s = rfcomm_session_get(src, dst); if (!s) { - s = rfcomm_session_create(src, dst, &err); + s = rfcomm_session_create(src, dst, d->sec_level, &err); if (!s) return err; } @@ -679,7 +682,10 @@ static void rfcomm_session_close(struct rfcomm_session *s, int err) rfcomm_session_put(s); } -static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err) +static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, + bdaddr_t *dst, + u8 sec_level, + int *err) { struct rfcomm_session *s = NULL; struct sockaddr_l2 addr; @@ -704,6 +710,7 @@ static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst sk = sock->sk; lock_sock(sk); l2cap_pi(sk)->imtu = l2cap_mtu; + l2cap_pi(sk)->sec_level = sec_level; if (l2cap_ertm) l2cap_pi(sk)->mode = L2CAP_MODE_ERTM; release_sock(sk); -- cgit v1.2.1 From 3e3ede7dda2d77d2cbec608e663b6a6ace501bfc Mon Sep 17 00:00:00 2001 From: "Edgar (gimli) Hucek" Date: Thu, 4 Nov 2010 08:04:33 +0100 Subject: Bluetooth: Add MacBookAir3,1(2) support Adding the new MacBookAir3,1(2) to btusb. Output without the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Output with the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Edgar (gimli) Hucek Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index b2f288459317..ab3894f742c3 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -68,6 +68,9 @@ static struct usb_device_id btusb_table[] = { /* Apple MacBookPro6,2 */ { USB_DEVICE(0x05ac, 0x8218) }, + /* Apple MacBookAir3,1, MacBookAir3,2 */ + { USB_DEVICE(0x05ac, 0x821b) }, + /* AVM BlueFRITZ! USB v2.0 */ { USB_DEVICE(0x057c, 0x3800) }, -- cgit v1.2.1 From 7379efeacb707f49729080791a7a562d8996aec4 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 8 Nov 2010 18:45:21 -0800 Subject: iwlwifi: dont use pci_dev before it being assign In order to use build-in debugging macro, pci_dev in priv need to be assigned first. This fix iwl3945 driver oopsed at boot with 2.6.37-rc1 Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 8f8c4b73f8b9..7edf8c2fb8c7 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4000,7 +4000,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e * "the hard way", rather than using device's scan. */ if (iwl3945_mod_params.disable_hw_scan) { - IWL_ERR(priv, "sw scan support is deprecated\n"); + dev_printk(KERN_DEBUG, &(pdev->dev), + "sw scan support is deprecated\n"); iwl3945_hw_ops.hw_scan = NULL; } -- cgit v1.2.1 From 62370e2b9376ea7b76e0423de28ccb322c17e2da Mon Sep 17 00:00:00 2001 From: Arnd Hannemann Date: Thu, 11 Nov 2010 11:44:32 -0600 Subject: b43legacy: Fix compile on ARM architecture When b43legacy is compiled on the arm platform, the following errors are seen: CC [M] drivers/net/wireless/b43legacy/xmit.o In file included from include/net/dst.h:11, from drivers/net/wireless/b43legacy/xmit.c:31: include/net/dst_ops.h:28: error: expected ':', ',', ';', '}' or '__attribute__' before '____cacheline_aligned_in_smp' include/net/dst_ops.h: In function 'dst_entries_get_fast': include/net/dst_ops.h:33: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_get_slow': include/net/dst_ops.h:41: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_add': include/net/dst_ops.h:49: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_init': include/net/dst_ops.h:55: error: 'struct dst_ops' has no member named 'pcpuc_entries' include/net/dst_ops.h: In function 'dst_entries_destroy': include/net/dst_ops.h:60: error: 'struct dst_ops' has no member named 'pcpuc_entries' make[4]: *** [drivers/net/wireless/b43legacy/xmit.o] Error 1 make[3]: *** [drivers/net/wireless/b43legacy] Error 2 make[2]: *** [drivers/net/wireless] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 The cause is a missing include of , which is present for i386 and x86_64 architectures, but not for arm. Signed-off-by: Arnd Hannemann Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- include/net/dst_ops.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h index 1fa5306e3e23..51665b3461b8 100644 --- a/include/net/dst_ops.h +++ b/include/net/dst_ops.h @@ -2,6 +2,7 @@ #define _NET_DST_OPS_H #include #include +#include struct dst_entry; struct kmem_cachep; -- cgit v1.2.1 From 309075cf08ed92a7d2c0e22b7653c5daabbd7ad1 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Fri, 12 Nov 2010 08:53:56 +0200 Subject: cfg80211: fix WIPHY_FLAG_IBSS_RSN bit WIPHY_FLAG_IBSS_RSN is BIT(7) as is WIPHY_FLAG_CONTROL_PORT_PROTOCOL. Change to BIT(8). Signed-off-by: Jussi Kivilinna Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/cfg80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 2a7936d7851d..97b8b7c9b63c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1355,7 +1355,7 @@ enum wiphy_flags { WIPHY_FLAG_4ADDR_AP = BIT(5), WIPHY_FLAG_4ADDR_STATION = BIT(6), WIPHY_FLAG_CONTROL_PORT_PROTOCOL = BIT(7), - WIPHY_FLAG_IBSS_RSN = BIT(7), + WIPHY_FLAG_IBSS_RSN = BIT(8), }; struct mac_address { -- cgit v1.2.1 From dfa31fef5dd3d204c4cdae7369f3542bd1f7e84a Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 15 Nov 2010 15:11:26 +0100 Subject: carl9170: fix usb anchor wait timeout usb_wait_anchor_empty_timeout's @timeout wants milliseconds and not jiffies. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 3317039cd28f..7504ed14c725 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -553,12 +553,12 @@ static int carl9170_usb_flush(struct ar9170 *ar) usb_free_urb(urb); } - ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, HZ); + ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000); if (ret == 0) err = -ETIMEDOUT; /* lets wait a while until the tx - queues are dried out */ - ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, HZ); + ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000); if (ret == 0) err = -ETIMEDOUT; -- cgit v1.2.1 From e8364bb8d041c0fd92d69a17ff19f535e1d1c187 Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Wed, 10 Nov 2010 15:11:07 +0530 Subject: ath9k: Remove pm_qos request after hw unregister. Update pm_qos before removing it in deinit_device to prevent this warning: pm_qos_update_request() called for unknown object. Signed-off-by: Vivek Natarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 6a0d99eff404..92bc5c5f4876 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -817,8 +817,6 @@ void ath9k_deinit_device(struct ath_softc *sc) ath9k_ps_wakeup(sc); - pm_qos_remove_request(&ath9k_pm_qos_req); - wiphy_rfkill_stop_polling(sc->hw->wiphy); ath_deinit_leds(sc); @@ -832,6 +830,7 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); + pm_qos_remove_request(&ath9k_pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); -- cgit v1.2.1 From 32b089558c54792028f14ae830ca7c0a8d9ac9a3 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 10 Nov 2010 17:51:24 +0530 Subject: ath9k_htc: Update usb device ID list Added new VID/PIDs into supported devices list Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index f7ec31b4ddd3..0e1227769e9f 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -36,8 +36,13 @@ static struct usb_device_id ath9k_hif_usb_ids[] = { { USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */ { USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */ { USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */ + { USB_DEVICE(0x13D3, 0x3348) }, /* Azurewave */ + { USB_DEVICE(0x13D3, 0x3349) }, /* Azurewave */ + { USB_DEVICE(0x13D3, 0x3350) }, /* Azurewave */ { USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */ { USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */ + { USB_DEVICE(0x040D, 0x3801) }, /* VIA */ + { USB_DEVICE(0x1668, 0x1200) }, /* Verizon */ { }, }; -- cgit v1.2.1 From 7cbf2611dac8d5f76fe64795a9426b8c97e6c3f8 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 10 Nov 2010 17:51:25 +0530 Subject: ath9k_htc: Add new devices into AR7010 Treat new PIDs (0xA704, 0x1200) as AR7010 devices. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 4 ++++ drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 ++ drivers/net/wireless/ath/ath9k/reg.h | 4 +++- 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 0e1227769e9f..dfb6560dab92 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -811,6 +811,8 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev) case 0x7010: case 0x7015: case 0x9018: + case 0xA704: + case 0x1200: firm_offset = AR7010_FIRMWARE_TEXT; break; default: @@ -933,6 +935,8 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface, case 0x7010: case 0x7015: case 0x9018: + case 0xA704: + case 0x1200: if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x0202) hif_dev->fw_name = FIRMWARE_AR7010_1_1; else diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 3d7b97f1b3ae..7c8a38d04561 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -249,6 +249,8 @@ static int ath9k_init_htc_services(struct ath9k_htc_priv *priv, u16 devid) case 0x7010: case 0x7015: case 0x9018: + case 0xA704: + case 0x1200: priv->htc->credits = 45; break; default: diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index fa05b711e5cd..52ee82d6796b 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -866,7 +866,9 @@ #define AR_DEVID_7010(_ah) \ (((_ah)->hw_version.devid == 0x7010) || \ ((_ah)->hw_version.devid == 0x7015) || \ - ((_ah)->hw_version.devid == 0x9018)) + ((_ah)->hw_version.devid == 0x9018) || \ + ((_ah)->hw_version.devid == 0xA704) || \ + ((_ah)->hw_version.devid == 0x1200)) #define AR_RADIO_SREV_MAJOR 0xf0 #define AR_RAD5133_SREV_MAJOR 0xc0 -- cgit v1.2.1 From b5261cf4f3860bd772346a3e692683b6144dd44c Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 10 Nov 2010 17:51:26 +0530 Subject: ath9k_hw: Set proper eeprom offset for AR9287 HTC devices AR9287 based PCI & USB devices are differed in eeprom start offset. So set proper the offset for HTC devices to read nvram correctly. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom_9287.c | 2 +- drivers/net/wireless/ath/ath9k/reg.h | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index 966b9496a9dd..195406db3bd8 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -37,7 +37,7 @@ static bool ath9k_hw_ar9287_fill_eeprom(struct ath_hw *ah) int addr, eep_start_loc; eep_data = (u16 *)eep; - if (ah->hw_version.devid == 0x7015) + if (AR9287_HTC_DEVID(ah)) eep_start_loc = AR9287_HTC_EEP_START_LOC; else eep_start_loc = AR9287_EEP_START_LOC; diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 52ee82d6796b..dddf579aacf1 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -870,6 +870,10 @@ ((_ah)->hw_version.devid == 0xA704) || \ ((_ah)->hw_version.devid == 0x1200)) +#define AR9287_HTC_DEVID(_ah) \ + (((_ah)->hw_version.devid == 0x7015) || \ + ((_ah)->hw_version.devid == 0x1200)) + #define AR_RADIO_SREV_MAJOR 0xf0 #define AR_RAD5133_SREV_MAJOR 0xc0 #define AR_RAD2133_SREV_MAJOR 0xd0 -- cgit v1.2.1 From 9236d838c920e90708570d9bbd7bb82d30a38130 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 12 Nov 2010 16:31:23 -0800 Subject: cfg80211: fix extension channel checks to initiate communication When operating in a mode that initiates communication and using HT40 we should fail if we cannot use both primary and secondary channels to initiate communication. Our current ht40 allowmap only covers STA mode of operation, for beaconing modes we need a check on the fly as the mode of operation is dynamic and there other flags other than disable which we should read to check if we can initiate communication. Do not allow for initiating communication if our secondary HT40 channel has is either disabled, has a passive scan flag, a no-ibss flag or is a radar channel. Userspace now has similar checks but this is also needed in-kernel. Reported-by: Jouni Malinen Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/chan.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/net/wireless/chan.c b/net/wireless/chan.c index d0c92dddb26b..c8d190d911e4 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -44,6 +44,36 @@ rdev_freq_to_chan(struct cfg80211_registered_device *rdev, return chan; } +static bool can_beacon_sec_chan(struct wiphy *wiphy, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type) +{ + struct ieee80211_channel *sec_chan; + int diff; + + switch (channel_type) { + case NL80211_CHAN_HT40PLUS: + diff = 20; + case NL80211_CHAN_HT40MINUS: + diff = -20; + default: + return false; + } + + sec_chan = ieee80211_get_channel(wiphy, chan->center_freq + diff); + if (!sec_chan) + return false; + + /* we'll need a DFS capability later */ + if (sec_chan->flags & (IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_PASSIVE_SCAN | + IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_RADAR)) + return false; + + return true; +} + int cfg80211_set_freq(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, int freq, enum nl80211_channel_type channel_type) @@ -68,6 +98,28 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev, if (!chan) return -EINVAL; + /* Both channels should be able to initiate communication */ + if (wdev && (wdev->iftype == NL80211_IFTYPE_ADHOC || + wdev->iftype == NL80211_IFTYPE_AP || + wdev->iftype == NL80211_IFTYPE_AP_VLAN || + wdev->iftype == NL80211_IFTYPE_MESH_POINT || + wdev->iftype == NL80211_IFTYPE_P2P_GO)) { + switch (channel_type) { + case NL80211_CHAN_HT40PLUS: + case NL80211_CHAN_HT40MINUS: + if (!can_beacon_sec_chan(&rdev->wiphy, chan, + channel_type)) { + printk(KERN_DEBUG + "cfg80211: Secondary channel not " + "allowed to initiate communication\n"); + return -EINVAL; + } + break; + default: + break; + } + } + result = rdev->ops->set_channel(&rdev->wiphy, wdev ? wdev->netdev : NULL, chan, channel_type); -- cgit v1.2.1 From 09a02fdb919876c01e8f05960750a418b3f7fa48 Mon Sep 17 00:00:00 2001 From: Mark Mentovai Date: Wed, 17 Nov 2010 16:34:37 -0500 Subject: cfg80211: fix can_beacon_sec_chan, reenable HT40 This follows wireless-testing 9236d838c920e90708570d9bbd7bb82d30a38130 ("cfg80211: fix extension channel checks to initiate communication") and fixes accidental case fall-through. Without this fix, HT40 is entirely blocked. Signed-off-by: Mark Mentovai Cc: stable@kernel.org Acked-by: Luis R. Rodriguez --- net/wireless/chan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/chan.c b/net/wireless/chan.c index c8d190d911e4..17cd0c04d139 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -54,8 +54,10 @@ static bool can_beacon_sec_chan(struct wiphy *wiphy, switch (channel_type) { case NL80211_CHAN_HT40PLUS: diff = 20; + break; case NL80211_CHAN_HT40MINUS: diff = -20; + break; default: return false; } -- cgit v1.2.1 From 3bf30b56c4f0a1c4fae34050b7db4527c92891e8 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 18 Nov 2010 12:19:52 +0530 Subject: ath9k_htc: Avoid setting QoS control for non-QoS frames Setting tid information in the TX header is required only for QoS frames. Not handling this case causes severe data loss with some APs. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 3d19b5bc937f..29d80ca78393 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -121,7 +121,7 @@ int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, struct sk_buff *skb) tx_hdr.data_type = ATH9K_HTC_NORMAL; } - if (ieee80211_is_data(fc)) { + if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); tx_hdr.tidno = qc[0] & IEEE80211_QOS_CTL_TID_MASK; } -- cgit v1.2.1 From d47844a014fada1a788719f6426bc7044f2a0fd8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 20 Nov 2010 03:08:47 +0100 Subject: ath9k: fix timeout on stopping rx dma It seems that using ath9k_hw_stoppcurecv to stop rx dma is not enough. When it's time to stop DMA, the PCU is still busy, so the rx enable bit never clears. Using ath9k_hw_abortpcurecv helps with getting rx stopped much faster, with this change, I cannot reproduce the rx stop related WARN_ON anymore. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index c76ea53c20ce..1a62e351ec77 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -518,7 +518,7 @@ bool ath_stoprecv(struct ath_softc *sc) bool stopped; spin_lock_bh(&sc->rx.rxbuflock); - ath9k_hw_stoppcurecv(ah); + ath9k_hw_abortpcurecv(ah); ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah); -- cgit v1.2.1 From 1d8638d4038eb8709edc80e37a0bbb77253d86e9 Mon Sep 17 00:00:00 2001 From: Daniel Klaffenbach Date: Fri, 19 Nov 2010 21:25:21 -0600 Subject: ssb: b43-pci-bridge: Add new vendor for BCM4318 Add new vendor for Broadcom 4318. Signed-off-by: Daniel Klaffenbach Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/ssb/b43_pci_bridge.c | 1 + include/linux/pci_ids.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c index ef9c6a04ad8f..744d3f6e4709 100644 --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c @@ -24,6 +24,7 @@ static const struct pci_device_id b43_pci_bridge_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, + { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d278dd9cb765..f29c25ede70d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2043,6 +2043,7 @@ #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 +#define PCI_VENDOR_ID_BCM_GVC 0x14a4 #define PCI_VENDOR_ID_BROADCOM 0x14e4 #define PCI_DEVICE_ID_TIGON3_5752 0x1600 #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 -- cgit v1.2.1 From b397492a8c1022887a9b2fb925fe92e69ce0ad4d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 20 Nov 2010 13:15:27 +0100 Subject: carl9170: fix virtual interface setup crash This patch fixes a faulty bound check which caused a crash when too many virtual interface were brought up. BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: carl9170 [...] Pid: 4720, comm: wpa_supplicant Not tainted 2.6.37-rc2-wl+ EIP: 0060:[] EFLAGS: 00210206 CPU: 0 EIP is at carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] EAX: 00000000 ... Process wpa_supplicant Stack: f4f88f34 fffffff4 .. Call Trace: [] ? ieee80211_do_open+0x406/0x5c0 [mac80211] [...] Code: <89> 42 04 ... EIP: [] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] CR2: 0000000000000004 Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 980ae70ea424..a314c2c2bfbe 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -647,7 +647,7 @@ init: } unlock: - if (err && (vif_id != -1)) { + if (err && (vif_id >= 0)) { vif_priv->active = false; bitmap_release_region(&ar->vif_bitmap, vif_id, 0); ar->vifs--; -- cgit v1.2.1 From e476a5a41ad67d0e2b4a652820c49a3923eb936b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 23 Nov 2010 17:10:24 +0100 Subject: wireless: b43: fix error path in SDIO Fix unbalanced call to sdio_release_host() on the error path. Signed-off-by: Guennadi Liakhovetski Acked-by: Larry Finger Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/b43/sdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c index 9a55338d957f..09e2dfd7b175 100644 --- a/drivers/net/wireless/b43/sdio.c +++ b/drivers/net/wireless/b43/sdio.c @@ -163,6 +163,7 @@ static int b43_sdio_probe(struct sdio_func *func, err_free_ssb: kfree(sdio); err_disable_func: + sdio_claim_host(func); sdio_disable_func(func); err_release_host: sdio_release_host(func); -- cgit v1.2.1