From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@ppc970.osdl.org>
Date: Sat, 16 Apr 2005 15:20:36 -0700
Subject: Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
---
arch/ppc/oprofile/common.c | 161 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 161 insertions(+)
create mode 100644 arch/ppc/oprofile/common.c
(limited to 'arch/ppc/oprofile/common.c')
diff --git a/arch/ppc/oprofile/common.c b/arch/ppc/oprofile/common.c
new file mode 100644
index 000000000000..3169c67abea7
--- /dev/null
+++ b/arch/ppc/oprofile/common.c
@@ -0,0 +1,161 @@
+/*
+ * PPC 32 oprofile support
+ * Based on PPC64 oprofile support
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Copyright (C) Freescale Semiconductor, Inc 2004
+ *
+ * Author: Andy Fleming
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/perfmon.h>
+#include <asm/cputable.h>
+
+#include "op_impl.h"
+
+static struct op_ppc32_model *model;
+
+static struct op_counter_config ctr[OP_MAX_COUNTER];
+static struct op_system_config sys;
+
+static void op_handle_interrupt(struct pt_regs *regs)
+{
+ model->handle_interrupt(regs, ctr);
+}
+
+static int op_ppc32_setup(void)
+{
+ /* Install our interrupt handler into the existing hook. */
+ if(request_perfmon_irq(&op_handle_interrupt))
+ return -EBUSY;
+
+ mb();
+
+ /* Pre-compute the values to stuff in the hardware registers. */
+ model->reg_setup(ctr, &sys, model->num_counters);
+
+#if 0
+ /* FIXME: Make multi-cpu work */
+ /* Configure the registers on all cpus. */
+ on_each_cpu(model->reg_setup, NULL, 0, 1);
+#endif
+
+ return 0;
+}
+
+static void op_ppc32_shutdown(void)
+{
+ mb();
+
+ /* Remove our interrupt handler. We may be removing this module. */
+ free_perfmon_irq();
+}
+
+static void op_ppc32_cpu_start(void *dummy)
+{
+ model->start(ctr);
+}
+
+static int op_ppc32_start(void)
+{
+ on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1);
+ return 0;
+}
+
+static inline void op_ppc32_cpu_stop(void *dummy)
+{
+ model->stop();
+}
+
+static void op_ppc32_stop(void)
+{
+ on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1);
+}
+
+static int op_ppc32_create_files(struct super_block *sb, struct dentry *root)
+{
+ int i;
+
+ for (i = 0; i < model->num_counters; ++i) {
+ struct dentry *dir;
+ char buf[3];
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+
+ oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+
+ /* FIXME: Not sure if this is used */
+ oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
+ }
+
+ oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
+ oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
+
+ /* Default to tracing both kernel and user */
+ sys.enable_kernel = 1;
+ sys.enable_user = 1;
+
+ return 0;
+}
+
+static struct oprofile_operations oprof_ppc32_ops = {
+ .create_files = op_ppc32_create_files,
+ .setup = op_ppc32_setup,
+ .shutdown = op_ppc32_shutdown,
+ .start = op_ppc32_start,
+ .stop = op_ppc32_stop,
+ .cpu_type = NULL /* To be filled in below. */
+};
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+ char *name;
+ int cpu_id = smp_processor_id();
+
+#ifdef CONFIG_FSL_BOOKE
+ model = &op_model_fsl_booke;
+#else
+ return -ENODEV;
+#endif
+
+ name = kmalloc(32, GFP_KERNEL);
+
+ if (NULL == name)
+ return -ENOMEM;
+
+ sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
+
+ oprof_ppc32_ops.cpu_type = name;
+
+ model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
+
+ *ops = oprof_ppc32_ops;
+
+ printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+ oprof_ppc32_ops.cpu_type);
+
+ return 0;
+}
+
+void oprofile_arch_exit(void)
+{
+ kfree(oprof_ppc32_ops.cpu_type);
+ oprof_ppc32_ops.cpu_type = NULL;
+}
--
cgit v1.2.1