From 0265634eb9e04a16ae99941c320718c38eb865e0 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sat, 25 Feb 2017 08:28:16 -0300 Subject: [media] serial_ir: ensure we're ready to receive interrupts When the interrupt requested with devm_request_irq(), serial_ir.rcdev is still null so will cause null deference if the irq handler is called early on. Also ensure that timeout_timer is setup. Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com [mchehab@s-opensource.com: moved serial_ir_probe() back to its original place] Cc: # 4.10 Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/serial_ir.c | 123 ++++++++++++++++++++++--------------------- 1 file changed, 62 insertions(+), 61 deletions(-) (limited to 'drivers/media/rc') diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c index 923fb2299553..41b54e40176c 100644 --- a/drivers/media/rc/serial_ir.c +++ b/drivers/media/rc/serial_ir.c @@ -487,10 +487,69 @@ static void serial_ir_timeout(unsigned long arg) ir_raw_event_handle(serial_ir.rcdev); } +/* Needed by serial_ir_probe() */ +static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf, + unsigned int count); +static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle); +static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier); +static int serial_ir_open(struct rc_dev *rcdev); +static void serial_ir_close(struct rc_dev *rcdev); + static int serial_ir_probe(struct platform_device *dev) { + struct rc_dev *rcdev; int i, nlow, nhigh, result; + rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW); + if (!rcdev) + return -ENOMEM; + + if (hardware[type].send_pulse && hardware[type].send_space) + rcdev->tx_ir = serial_ir_tx; + if (hardware[type].set_send_carrier) + rcdev->s_tx_carrier = serial_ir_tx_carrier; + if (hardware[type].set_duty_cycle) + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle; + + switch (type) { + case IR_HOMEBREW: + rcdev->input_name = "Serial IR type home-brew"; + break; + case IR_IRDEO: + rcdev->input_name = "Serial IR type IRdeo"; + break; + case IR_IRDEO_REMOTE: + rcdev->input_name = "Serial IR type IRdeo remote"; + break; + case IR_ANIMAX: + rcdev->input_name = "Serial IR type AnimaX"; + break; + case IR_IGOR: + rcdev->input_name = "Serial IR type IgorPlug"; + break; + } + + rcdev->input_phys = KBUILD_MODNAME "/input0"; + rcdev->input_id.bustype = BUS_HOST; + rcdev->input_id.vendor = 0x0001; + rcdev->input_id.product = 0x0001; + rcdev->input_id.version = 0x0100; + rcdev->open = serial_ir_open; + rcdev->close = serial_ir_close; + rcdev->dev.parent = &serial_ir.pdev->dev; + rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; + rcdev->driver_name = KBUILD_MODNAME; + rcdev->map_name = RC_MAP_RC6_MCE; + rcdev->min_timeout = 1; + rcdev->timeout = IR_DEFAULT_TIMEOUT; + rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; + rcdev->rx_resolution = 250000; + + serial_ir.rcdev = rcdev; + + setup_timer(&serial_ir.timeout_timer, serial_ir_timeout, + (unsigned long)&serial_ir); + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler, share_irq ? IRQF_SHARED : 0, KBUILD_MODNAME, &hardware); @@ -516,9 +575,6 @@ static int serial_ir_probe(struct platform_device *dev) return -EBUSY; } - setup_timer(&serial_ir.timeout_timer, serial_ir_timeout, - (unsigned long)&serial_ir); - result = hardware_init_port(); if (result < 0) return result; @@ -552,7 +608,8 @@ static int serial_ir_probe(struct platform_device *dev) sense ? "low" : "high"); dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io); - return 0; + + return devm_rc_register_device(&dev->dev, rcdev); } static int serial_ir_open(struct rc_dev *rcdev) @@ -723,7 +780,6 @@ static void serial_ir_exit(void) static int __init serial_ir_init_module(void) { - struct rc_dev *rcdev; int result; switch (type) { @@ -754,63 +810,9 @@ static int __init serial_ir_init_module(void) sense = !!sense; result = serial_ir_init(); - if (result) - return result; - - rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW); - if (!rcdev) { - result = -ENOMEM; - goto serial_cleanup; - } - - if (hardware[type].send_pulse && hardware[type].send_space) - rcdev->tx_ir = serial_ir_tx; - if (hardware[type].set_send_carrier) - rcdev->s_tx_carrier = serial_ir_tx_carrier; - if (hardware[type].set_duty_cycle) - rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle; - - switch (type) { - case IR_HOMEBREW: - rcdev->input_name = "Serial IR type home-brew"; - break; - case IR_IRDEO: - rcdev->input_name = "Serial IR type IRdeo"; - break; - case IR_IRDEO_REMOTE: - rcdev->input_name = "Serial IR type IRdeo remote"; - break; - case IR_ANIMAX: - rcdev->input_name = "Serial IR type AnimaX"; - break; - case IR_IGOR: - rcdev->input_name = "Serial IR type IgorPlug"; - break; - } - - rcdev->input_phys = KBUILD_MODNAME "/input0"; - rcdev->input_id.bustype = BUS_HOST; - rcdev->input_id.vendor = 0x0001; - rcdev->input_id.product = 0x0001; - rcdev->input_id.version = 0x0100; - rcdev->open = serial_ir_open; - rcdev->close = serial_ir_close; - rcdev->dev.parent = &serial_ir.pdev->dev; - rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; - rcdev->driver_name = KBUILD_MODNAME; - rcdev->map_name = RC_MAP_RC6_MCE; - rcdev->min_timeout = 1; - rcdev->timeout = IR_DEFAULT_TIMEOUT; - rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT; - rcdev->rx_resolution = 250000; - - serial_ir.rcdev = rcdev; - - result = rc_register_device(rcdev); - if (!result) return 0; -serial_cleanup: + serial_ir_exit(); return result; } @@ -818,7 +820,6 @@ serial_cleanup: static void __exit serial_ir_exit_module(void) { del_timer_sync(&serial_ir.timeout_timer); - rc_unregister_device(serial_ir.rcdev); serial_ir_exit(); } -- cgit v1.2.1