From 5b3e507820c6e120bc2680c0d35f9d9d81fcb98d Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Wed, 14 May 2014 14:58:08 -0300 Subject: mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding This commit adds support for the user to specify the ECC strength and step size through the devicetree. We keep the previous behavior, when there is no DT parameter provided. Signed-off-by: Ezequiel Garcia Signed-off-by: Brian Norris --- drivers/mtd/nand/pxa3xx_nand.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 3b66a6460d67..2a9add06c2d5 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1519,8 +1519,13 @@ KEEP_CONFIG: } } - ecc_strength = chip->ecc_strength_ds; - ecc_step = chip->ecc_step_ds; + if (pdata->ecc_strength && pdata->ecc_step_size) { + ecc_strength = pdata->ecc_strength; + ecc_step = pdata->ecc_step_size; + } else { + ecc_strength = chip->ecc_strength_ds; + ecc_step = chip->ecc_step_ds; + } /* Set default ECC strength requirements on non-ONFI devices */ if (ecc_strength < 1 && ecc_step < 1) { @@ -1729,6 +1734,14 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) of_property_read_u32(np, "num-cs", &pdata->num_cs); pdata->flash_bbt = of_get_nand_on_flash_bbt(np); + pdata->ecc_strength = of_get_nand_ecc_strength(np); + if (pdata->ecc_strength < 0) + pdata->ecc_strength = 0; + + pdata->ecc_step_size = of_get_nand_ecc_step_size(np); + if (pdata->ecc_step_size < 0) + pdata->ecc_step_size = 0; + pdev->dev.platform_data = pdata; return 0; -- cgit v1.2.1