From 88c9321d1ddb9c9539f1ef5da86a35604eb153d5 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 10 Nov 2015 13:03:04 +0100 Subject: spi: Add missing kerneldoc description for parameter Commit ca5d24854210 ("spi: Add THIS_MODULE to spi_driver in SPI core") adds the new __spi_register_driver() function, but keeps the kerneldoc for the spi_register_driver() function in place and forgets to add the description for the new owner parameter. Signed-off-by: Thierry Reding Signed-off-by: Mark Brown --- drivers/spi/spi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index e2415be209d5..20ef4693d48f 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -376,6 +376,7 @@ static void spi_drv_shutdown(struct device *dev) /** * __spi_register_driver - register a SPI driver + * @owner: owner module of the driver to register * @sdrv: the driver to register * Context: can sleep * -- cgit v1.2.1 From 98c8dccf2b2771fb622d449b2ec1604fc5d260e5 Mon Sep 17 00:00:00 2001 From: Nicolas Boichat Date: Mon, 9 Nov 2015 12:14:51 +0800 Subject: spi: mediatek: single device does not require cs_gpios When only one device is present, it is not necessary to specify cs_gpios, as the CS line can be controlled by the hardware module. Without this patch, older device tree bindings used before 37457607 "spi: mediatek: mt8173 spi multiple devices support" would cause a panic on boot. This fixes the crash, and re-introduces backward compatibility. Signed-off-by: Nicolas Boichat Acked-by: Leilk Liu Signed-off-by: Mark Brown --- drivers/spi/spi-mt65xx.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 563954a61424..7840067062a8 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -410,7 +410,7 @@ static int mtk_spi_setup(struct spi_device *spi) if (!spi->controller_data) spi->controller_data = (void *)&mtk_default_chip_info; - if (mdata->dev_comp->need_pad_sel) + if (mdata->dev_comp->need_pad_sel && gpio_is_valid(spi->cs_gpio)) gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); return 0; @@ -632,13 +632,23 @@ static int mtk_spi_probe(struct platform_device *pdev) goto err_put_master; } - for (i = 0; i < master->num_chipselect; i++) { - ret = devm_gpio_request(&pdev->dev, master->cs_gpios[i], - dev_name(&pdev->dev)); - if (ret) { - dev_err(&pdev->dev, - "can't get CS GPIO %i\n", i); - goto err_put_master; + if (!master->cs_gpios && master->num_chipselect > 1) { + dev_err(&pdev->dev, + "cs_gpios not specified and num_chipselect > 1\n"); + ret = -EINVAL; + goto err_put_master; + } + + if (master->cs_gpios) { + for (i = 0; i < master->num_chipselect; i++) { + ret = devm_gpio_request(&pdev->dev, + master->cs_gpios[i], + dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, + "can't get CS GPIO %i\n", i); + goto err_put_master; + } } } } -- cgit v1.2.1 From 0ba2cf70d23437161199e6b627f6948b47be9db4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 12 Nov 2015 17:44:34 +0100 Subject: spi: bcm63xx: use correct format string for printing a resource With a 64-bit resource_size_t, we get a build warning on bcm63xx_spi_probe: drivers/spi/spi-bcm63xx.c:565:16: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=] As we are printing a resource, we can just use the %pr format specifier that pretty-prints the address and avoids the warning. Signed-off-by: Arnd Bergmann Acked-by: Florian Fainelli Signed-off-by: Mark Brown --- drivers/spi/spi-bcm63xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 06858e04ec59..bf9a610e5b89 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -562,8 +562,8 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) goto out_clk_disable; } - dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d)\n", - r->start, irq, bs->fifo_size); + dev_info(dev, "at %pr (irq %d, FIFOs size %d)\n", + r, irq, bs->fifo_size); return 0; -- cgit v1.2.1 From f3d4bb3342630cd3d89882586851498d8dc7c0f2 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 23 Nov 2015 08:13:45 +0100 Subject: spi: pl022: handle EPROBE_DEFER for dma Handle EPROBE_DEFER explicitly so that we ensure that we get the DMA channel specified in the device tree, instead of depending on the DMA controller getting probed before us. Signed-off-by: Rabin Vincent Signed-off-by: Mark Brown --- drivers/spi/spi-pl022.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 94af80676684..5e5fd77e2711 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1171,19 +1171,31 @@ err_no_rxchan: static int pl022_dma_autoprobe(struct pl022 *pl022) { struct device *dev = &pl022->adev->dev; + struct dma_chan *chan; + int err; /* automatically configure DMA channels from platform, normally using DT */ - pl022->dma_rx_channel = dma_request_slave_channel(dev, "rx"); - if (!pl022->dma_rx_channel) + chan = dma_request_slave_channel_reason(dev, "rx"); + if (IS_ERR(chan)) { + err = PTR_ERR(chan); goto err_no_rxchan; + } + + pl022->dma_rx_channel = chan; - pl022->dma_tx_channel = dma_request_slave_channel(dev, "tx"); - if (!pl022->dma_tx_channel) + chan = dma_request_slave_channel_reason(dev, "tx"); + if (IS_ERR(chan)) { + err = PTR_ERR(chan); goto err_no_txchan; + } + + pl022->dma_tx_channel = chan; pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!pl022->dummypage) + if (!pl022->dummypage) { + err = -ENOMEM; goto err_no_dummypage; + } return 0; @@ -1194,7 +1206,7 @@ err_no_txchan: dma_release_channel(pl022->dma_rx_channel); pl022->dma_rx_channel = NULL; err_no_rxchan: - return -ENODEV; + return err; } static void terminate_dma(struct pl022 *pl022) @@ -2236,6 +2248,10 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id) /* Get DMA channels, try autoconfiguration first */ status = pl022_dma_autoprobe(pl022); + if (status == -EPROBE_DEFER) { + dev_dbg(dev, "deferring probe to get DMA channel\n"); + goto err_no_irq; + } /* If that failed, use channels from platform_info */ if (status == 0) -- cgit v1.2.1 From 77e8058810303e5c18b462adb4f761dbb4f3b657 Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Fri, 27 Nov 2015 12:31:09 +0000 Subject: spi: bugfix: spi_message.transfer_length does not get reset When submitting an identical spi_message multiple times via spi_sync the spi_message.frame_length does not get reset to 0 in __spi_validate before adding up all spi_transfer.len resulting in frame_length > actual_length on all but the first spi_sync call. Signed-off-by: Martin Sperl Signed-off-by: Mark Brown --- drivers/spi/spi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index e2415be209d5..a0e346f3b71e 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2130,6 +2130,7 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message) * Set transfer tx_nbits and rx_nbits as single transfer default * (SPI_NBITS_SINGLE) if it is not set for this transfer. */ + message->frame_length = 0; list_for_each_entry(xfer, &message->transfers, transfer_list) { message->frame_length += xfer->len; if (!xfer->bits_per_word) -- cgit v1.2.1 From ef22d1604c622d24ded69f40d40c3c6d83f71156 Mon Sep 17 00:00:00 2001 From: Bhuvanchandra DV Date: Thu, 10 Dec 2015 11:25:30 +0530 Subject: spi-fsl-dspi: Fix CTAR Register access DSPI instances in Vybrid have a different amount of chip selects and CTARs (Clock and transfer Attributes Register). In case of DSPI1 we only have 2 CTAR registers and 4 CS. In present driver implementation CTAR offset is derived from CS instance which will lead to out of bound access if chip select instance is greater than CTAR register instance, hence use single CTAR0 register for all CS instances. Since we write the CTAR register anyway before each access, there is no value in using the additional CTAR registers. Also one should not program a value in CTAS for a CTAR register that is not present, hence configure CTAS to use CTAR0. Signed-off-by: Bhuvanchandra DV Acked-by: Stefan Agner Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 59a11437db70..39412c9097c6 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -167,7 +167,7 @@ static inline int is_double_byte_mode(struct fsl_dspi *dspi) { unsigned int val; - regmap_read(dspi->regmap, SPI_CTAR(dspi->cs), &val); + regmap_read(dspi->regmap, SPI_CTAR(0), &val); return ((val & SPI_FRAME_BITS_MASK) == SPI_FRAME_BITS(8)) ? 0 : 1; } @@ -257,7 +257,7 @@ static u32 dspi_data_to_pushr(struct fsl_dspi *dspi, int tx_word) return SPI_PUSHR_TXDATA(d16) | SPI_PUSHR_PCS(dspi->cs) | - SPI_PUSHR_CTAS(dspi->cs) | + SPI_PUSHR_CTAS(0) | SPI_PUSHR_CONT; } @@ -290,7 +290,7 @@ static int dspi_eoq_write(struct fsl_dspi *dspi) */ if (tx_word && (dspi->len == 1)) { dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM; - regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs), + regmap_update_bits(dspi->regmap, SPI_CTAR(0), SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8)); tx_word = 0; } @@ -339,7 +339,7 @@ static int dspi_tcfq_write(struct fsl_dspi *dspi) if (tx_word && (dspi->len == 1)) { dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM; - regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs), + regmap_update_bits(dspi->regmap, SPI_CTAR(0), SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8)); tx_word = 0; } @@ -407,7 +407,7 @@ static int dspi_transfer_one_message(struct spi_master *master, regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF, SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF); - regmap_write(dspi->regmap, SPI_CTAR(dspi->cs), + regmap_write(dspi->regmap, SPI_CTAR(0), dspi->cur_chip->ctar_val); trans_mode = dspi->devtype_data->trans_mode; @@ -566,7 +566,7 @@ static irqreturn_t dspi_interrupt(int irq, void *dev_id) if (!dspi->len) { if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM) { regmap_update_bits(dspi->regmap, - SPI_CTAR(dspi->cs), + SPI_CTAR(0), SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(16)); dspi->dataflags &= ~TRAN_STATE_WORD_ODD_NUM; -- cgit v1.2.1 From 56ea1075e7f07724cf9b91039aa0968a0c70112f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 16 Nov 2015 13:57:37 +0000 Subject: spi: spidev: Hold spi_lock over all defererences of spi in release() We use the spi_lock spinlock to protect against races between the device being removed and file operations on the spidev. This means that in the removal path all references to the device need to be done under lock as in removal we dropping references to the device. Reported-by: Vegard Nossum Signed-off-by: Mark Brown --- drivers/spi/spidev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 91a0fcd72423..d0e7dfc647cf 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -651,11 +651,11 @@ static int spidev_release(struct inode *inode, struct file *filp) kfree(spidev->rx_buffer); spidev->rx_buffer = NULL; + spin_lock_irq(&spidev->spi_lock); if (spidev->spi) spidev->speed_hz = spidev->spi->max_speed_hz; /* ... after we unbound from the underlying device? */ - spin_lock_irq(&spidev->spi_lock); dofree = (spidev->spi == NULL); spin_unlock_irq(&spidev->spi_lock); -- cgit v1.2.1 From 157f38f993919b648187ba341bfb05d0e91ad2f6 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 14 Dec 2015 16:16:19 +0100 Subject: spi: fix parent-device reference leak Fix parent-device reference leak due to SPI-core taking an unnecessary reference to the parent when allocating the master structure, a reference that was never released. Note that driver core takes its own reference to the parent when the master device is registered. Fixes: 49dce689ad4e ("spi doesn't need class_device") Signed-off-by: Johan Hovold Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index e2415be209d5..7bf25274ad78 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1704,7 +1704,7 @@ struct spi_master *spi_alloc_master(struct device *dev, unsigned size) master->bus_num = -1; master->num_chipselect = 1; master->dev.class = &spi_master_class; - master->dev.parent = get_device(dev); + master->dev.parent = dev; spi_master_set_devdata(master, &master[1]); return master; -- cgit v1.2.1