From 21b4991051780b49b217c363f79366ed94c3b4b7 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Mon, 10 Oct 2016 15:14:34 +0200 Subject: soc/tegra: pmc: Add I/O pad voltage support I/O pins on Tegra SoCs are grouped into so-called I/O pads. Each such pad can be used to control the common voltage signal level and power state of the pins in the given pad. I/O pads can be powered down even if the system is active, which can save power from that I/O interface. For SoC generations prior to Tegra124 the I/O pad voltage is automatically detected and hence the system software doesn't need to configure it. However, starting with Tegra210 the detection logic has been removed, so explicit control of the I/O pad voltage by system software is required. Signed-off-by: Laxman Dewangan Signed-off-by: Thierry Reding --- include/soc/tegra/pmc.h | 126 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 95 insertions(+), 31 deletions(-) (limited to 'include/soc') diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h index e9e53473a63e..2f271d1b9cea 100644 --- a/include/soc/tegra/pmc.h +++ b/include/soc/tegra/pmc.h @@ -76,37 +76,73 @@ int tegra_pmc_cpu_remove_clamping(unsigned int cpuid); #define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D -#define TEGRA_IO_RAIL_CSIA 0 -#define TEGRA_IO_RAIL_CSIB 1 -#define TEGRA_IO_RAIL_DSI 2 -#define TEGRA_IO_RAIL_MIPI_BIAS 3 -#define TEGRA_IO_RAIL_PEX_BIAS 4 -#define TEGRA_IO_RAIL_PEX_CLK1 5 -#define TEGRA_IO_RAIL_PEX_CLK2 6 -#define TEGRA_IO_RAIL_USB0 9 -#define TEGRA_IO_RAIL_USB1 10 -#define TEGRA_IO_RAIL_USB2 11 -#define TEGRA_IO_RAIL_USB_BIAS 12 -#define TEGRA_IO_RAIL_NAND 13 -#define TEGRA_IO_RAIL_UART 14 -#define TEGRA_IO_RAIL_BB 15 -#define TEGRA_IO_RAIL_AUDIO 17 -#define TEGRA_IO_RAIL_HSIC 19 -#define TEGRA_IO_RAIL_COMP 22 -#define TEGRA_IO_RAIL_HDMI 28 -#define TEGRA_IO_RAIL_PEX_CNTRL 32 -#define TEGRA_IO_RAIL_SDMMC1 33 -#define TEGRA_IO_RAIL_SDMMC3 34 -#define TEGRA_IO_RAIL_SDMMC4 35 -#define TEGRA_IO_RAIL_CAM 36 -#define TEGRA_IO_RAIL_RES 37 -#define TEGRA_IO_RAIL_HV 38 -#define TEGRA_IO_RAIL_DSIB 39 -#define TEGRA_IO_RAIL_DSIC 40 -#define TEGRA_IO_RAIL_DSID 41 -#define TEGRA_IO_RAIL_CSIE 44 -#define TEGRA_IO_RAIL_LVDS 57 -#define TEGRA_IO_RAIL_SYS_DDC 58 +/** + * enum tegra_io_pad - I/O pad group identifier + * + * I/O pins on Tegra SoCs are grouped into so-called I/O pads. Each such pad + * can be used to control the common voltage signal level and power state of + * the pins of the given pad. + */ +enum tegra_io_pad { + TEGRA_IO_PAD_AUDIO, + TEGRA_IO_PAD_AUDIO_HV, + TEGRA_IO_PAD_BB, + TEGRA_IO_PAD_CAM, + TEGRA_IO_PAD_COMP, + TEGRA_IO_PAD_CSIA, + TEGRA_IO_PAD_CSIB, + TEGRA_IO_PAD_CSIC, + TEGRA_IO_PAD_CSID, + TEGRA_IO_PAD_CSIE, + TEGRA_IO_PAD_CSIF, + TEGRA_IO_PAD_DBG, + TEGRA_IO_PAD_DEBUG_NONAO, + TEGRA_IO_PAD_DMIC, + TEGRA_IO_PAD_DP, + TEGRA_IO_PAD_DSI, + TEGRA_IO_PAD_DSIB, + TEGRA_IO_PAD_DSIC, + TEGRA_IO_PAD_DSID, + TEGRA_IO_PAD_EMMC, + TEGRA_IO_PAD_EMMC2, + TEGRA_IO_PAD_GPIO, + TEGRA_IO_PAD_HDMI, + TEGRA_IO_PAD_HSIC, + TEGRA_IO_PAD_HV, + TEGRA_IO_PAD_LVDS, + TEGRA_IO_PAD_MIPI_BIAS, + TEGRA_IO_PAD_NAND, + TEGRA_IO_PAD_PEX_BIAS, + TEGRA_IO_PAD_PEX_CLK1, + TEGRA_IO_PAD_PEX_CLK2, + TEGRA_IO_PAD_PEX_CNTRL, + TEGRA_IO_PAD_SDMMC1, + TEGRA_IO_PAD_SDMMC3, + TEGRA_IO_PAD_SDMMC4, + TEGRA_IO_PAD_SPI, + TEGRA_IO_PAD_SPI_HV, + TEGRA_IO_PAD_SYS_DDC, + TEGRA_IO_PAD_UART, + TEGRA_IO_PAD_USB0, + TEGRA_IO_PAD_USB1, + TEGRA_IO_PAD_USB2, + TEGRA_IO_PAD_USB3, + TEGRA_IO_PAD_USB_BIAS, +}; + +/* deprecated, use TEGRA_IO_PAD_{HDMI,LVDS} instead */ +#define TEGRA_IO_RAIL_HDMI TEGRA_IO_PAD_HDMI +#define TEGRA_IO_RAIL_LVDS TEGRA_IO_PAD_LVDS + +/** + * enum tegra_io_pad_voltage - voltage level of the I/O pad's source rail + * @TEGRA_IO_PAD_1800000UV: 1.8 V + * @TEGRA_IO_PAD_3300000UV: 3.3 V + */ +enum tegra_io_pad_voltage { + TEGRA_IO_PAD_1800000UV, + TEGRA_IO_PAD_3300000UV, +}; #ifdef CONFIG_ARCH_TEGRA int tegra_powergate_is_powered(unsigned int id); @@ -118,6 +154,13 @@ int tegra_powergate_remove_clamping(unsigned int id); int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk, struct reset_control *rst); +int tegra_io_pad_power_enable(enum tegra_io_pad id); +int tegra_io_pad_power_disable(enum tegra_io_pad id); +int tegra_io_pad_set_voltage(enum tegra_io_pad id, + enum tegra_io_pad_voltage voltage); +int tegra_io_pad_get_voltage(enum tegra_io_pad id); + +/* deprecated, use tegra_io_pad_power_{enable,disable}() instead */ int tegra_io_rail_power_on(unsigned int id); int tegra_io_rail_power_off(unsigned int id); #else @@ -148,6 +191,27 @@ static inline int tegra_powergate_sequence_power_up(unsigned int id, return -ENOSYS; } +static inline int tegra_io_pad_power_enable(enum tegra_io_pad id) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_power_disable(enum tegra_io_pad id) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_set_voltage(enum tegra_io_pad id, + enum tegra_io_pad_voltage voltage) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_get_voltage(enum tegra_io_pad id) +{ + return -ENOSYS; +} + static inline int tegra_io_rail_power_on(unsigned int id) { return -ENOSYS; -- cgit v1.2.1