app-emulation/libvirt: ebuild maintenance (1.2.19, 1.2.20, 9999)

 - use autotools-utils eclass
 - clean up and reorganize configuration and pkg_setup phase
 - outsource README.gentoo contents into separate file under files/

Package-Manager: portage-2.2.22

4 files changed, 551 insertions, 849 deletions

diff --git a/app-emulation/libvirt/files/README.gentoo-r1 b/app-emulation/libvirt/files/README.gentoo-r1
new file mode 100644
index 00000000000..74d1e77930d
--- /dev/null
+++ b/app-emulation/libvirt/files/README.gentoo-r1
@@ -0,0 +1,53 @@
+Important: The openrc libvirtd init script is now broken up into two
+separate services: libvirtd, that solely handles the daemon, and
+libvirt-guests, that takes care of clients during shutdown/restart of the
+host. In order to reenable client handling, edit /etc/conf.d/libvirt-guests
+and enable the service and start it:
+
+	$ rc-update add libvirt-guests
+	$ service libvirt-guests start
+
+
+For the basic networking support (bridged and routed networks) you don't
+need any extra software. For more complex network modes including but not
+limited to NATed network, you can enable the 'virt-network' USE flag. It
+will pull in required runtime dependencies
+
+
+If you are using dnsmasq on your system, you will have to configure
+/etc/dnsmasq.conf to enable the following settings:
+
+	bind-interfaces
+	interface or except-interface
+
+Otherwise you might have issues with your existing DNS server.
+
+
+For openrc users:
+
+	Please use /etc/conf.d/libvirtd to control the '--listen' parameter for
+	libvirtd.
+
+	Use /etc/init.d/libvirt-guests to manage clients on restart/shutdown of
+	the host. The default configuration will suspend and resume running kvm
+	guests with 'managedsave'. This behavior can be changed under
+	/etc/conf.d/libvirt-guests
+
+
+For systemd users:
+
+	Please use /etc/systemd/system/libvirtd.service.d/00gentoo.conf
+	to control the '--listen' parameter for libvirtd.
+
+	The configuration for the 'libvirt-guests.service' is found under
+	/etc/libvirt/libvirt-guests.conf"
+
+
+If you have built libvirt without policykit support (USE=-policykit), you
+must change the unix sock group and/or perms in /etc/libvirt/libvirtd.conf
+in order to allow normal users to connect to libvirtd.
+
+
+If libvirtd is built with USE=caps, libvirt will now start qemu/kvm VMs
+with non-root privileges. Ensure any resources your VMs use are accessible
+by qemu:qemu.
diff --git a/app-emulation/libvirt/libvirt-1.2.19-r1.ebuild b/app-emulation/libvirt/libvirt-1.2.19-r1.ebuild
index b949b33fa68..f345b060454 100644
--- a/app-emulation/libvirt/libvirt-1.2.19-r1.ebuild
+++ b/app-emulation/libvirt/libvirt-1.2.19-r1.ebuild
@@ -4,11 +4,7 @@
 
 EAPI=5
 
-AUTOTOOLIZE=yes
-
-MY_P="${P/_rc/-rc}"
-
-inherit eutils user autotools linux-info systemd readme.gentoo
+inherit eutils user autotools-utils linux-info systemd readme.gentoo
 
 BACKPORTS=""
 
@@ -21,9 +17,9 @@ if [[ ${PV} = *9999* ]]; then
 else
 	# Versions with 4 numbers are stable updates:
 	if [[ ${PV} =~ ^[0-9]+(\.[0-9]+){3} ]]; then
-		SRC_URI="http://libvirt.org/sources/stable_updates/${MY_P}.tar.gz"
+		SRC_URI="http://libvirt.org/sources/stable_updates/${P}.tar.gz"
 	else
-		SRC_URI="http://libvirt.org/sources/${MY_P}.tar.gz"
+		SRC_URI="http://libvirt.org/sources/${P}.tar.gz"
 	fi
 	SRC_URI+=" ${BACKPORTS:+
 		https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz
@@ -31,45 +27,46 @@ else
 	KEYWORDS="~amd64 ~x86"
 	SLOT="0/${PV}"
 fi
-S="${WORKDIR}/${P%_rc*}"
 
 DESCRIPTION="C toolkit to manipulate virtual machines"
 HOMEPAGE="http://www.libvirt.org/"
 LICENSE="LGPL-2.1"
-# TODO: Reenable IUSE wireshark-plugins
 IUSE="apparmor audit avahi +caps firewalld fuse glusterfs iscsi +libvirtd lvm \
 	lxc +macvtap nfs nls numa openvz parted pcap phyp policykit +qemu rbd sasl \
-	selinux +udev uml +vepa virtualbox virt-network wireshark-plugins xen \
-	elibc_glibc systemd"
-REQUIRED_USE="libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
+	selinux systemd +udev uml +vepa virtualbox virt-network wireshark-plugins \
+	xen elibc_glibc"
+
+REQUIRED_USE="
+	firewalld? ( virt-network )
+	libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
 	lxc? ( caps libvirtd )
 	openvz? ( libvirtd )
 	qemu? ( libvirtd )
 	uml? ( libvirtd )
 	vepa? ( macvtap )
-	virtualbox? ( libvirtd )
-	xen? ( libvirtd )
 	virt-network? ( libvirtd )
-	firewalld? ( virt-network )"
+	virtualbox? ( libvirtd )
+	xen? ( libvirtd )"
 
 # gettext.sh command is used by the libvirt command wrappers, and it's
 # non-optional, so put it into RDEPEND.
 # We can use both libnl:1.1 and libnl:3, but if you have both installed, the
 # package will use 3 by default. Since we don't have slot pinning in an API,
 # we must go with the most recent
-RDEPEND="sys-libs/readline:=
-	sys-libs/ncurses:0=
-	>=net-misc/curl-7.18.0
+RDEPEND="
+	app-misc/scrub
 	dev-libs/libgcrypt:0
-	>=dev-libs/libxml2-2.7.6
 	dev-libs/libnl:3
+	>=dev-libs/libxml2-2.7.6
+	>=net-analyzer/netcat6-1.0-r2
 	>=net-libs/gnutls-1.0.25
 	net-libs/libssh2
+	>=net-misc/curl-7.18.0
 	sys-apps/dmidecode
 	>=sys-apps/util-linux-2.17
 	sys-devel/gettext
-	>=net-analyzer/netcat6-1.0-r2
-	app-misc/scrub
+	sys-libs/ncurses:0=
+	sys-libs/readline:=
 	apparmor? ( sys-libs/libapparmor )
 	audit? ( sys-process/audit )
 	avahi? ( >=net-dns/avahi-0.6[dbus] )
@@ -77,8 +74,8 @@ RDEPEND="sys-libs/readline:=
 	fuse? ( >=sys-fs/fuse-2.8.6 )
 	glusterfs? ( >=sys-cluster/glusterfs-3.4.1 )
 	iscsi? ( sys-block/open-iscsi )
-	lxc? ( !systemd? ( sys-power/pm-utils ) )
 	lvm? ( >=sys-fs/lvm2-2.02.48-r2 )
+	lxc? ( !systemd? ( sys-power/pm-utils ) )
 	nfs? ( net-fs/nfs-utils )
 	numa? (
 		>sys-process/numactl-2.0.2
@@ -100,127 +97,26 @@ RDEPEND="sys-libs/readline:=
 	sasl? ( dev-libs/cyrus-sasl )
 	selinux? ( >=sys-libs/libselinux-2.0.85 )
 	systemd? ( sys-apps/systemd )
-	virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
-	wireshark-plugins? ( net-analyzer/wireshark:= )
-	xen? ( app-emulation/xen-tools app-emulation/xen )
-	udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
-	virt-network? ( net-dns/dnsmasq[script]
+	virt-network? (
+		net-dns/dnsmasq[script]
 		net-firewall/ebtables
 		>=net-firewall/iptables-1.4.10[ipv6]
 		net-misc/radvd
 		sys-apps/iproute2[-minimal]
 		firewalld? ( net-firewall/firewalld )
 	)
+	virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
+	wireshark-plugins? ( net-analyzer/wireshark:= )
+	xen? ( app-emulation/xen-tools app-emulation/xen )
+	udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
 	elibc_glibc? ( || ( >=net-libs/libtirpc-0.2.2-r1 <sys-libs/glibc-2.14 ) )"
 
 DEPEND="${RDEPEND}
-	virtual/pkgconfig
 	app-text/xhtml1
 	dev-lang/perl
+	dev-libs/libxslt
 	dev-perl/XML-XPath
-	dev-libs/libxslt"
-
-# gentoo.readme stuff:
-DISABLE_AUTOFORMATTING=true
-DOC_CONTENTS="Important: The openrc libvirtd init script is now broken up into two
-separate services: libvirtd, that solely handles the daemon, and
-libvirt-guests, that takes care of clients during shutdown/restart of the
-host. In order to reenable client handling, edit /etc/conf.d/libvirt-guests
-and enable the service and start it:
-	$ rc-update add libvirt-guests
-	$ service libvirt-guests start
-
-For the basic networking support (bridged and routed networks) you don't
-need any extra software. For more complex network modes including but not
-limited to NATed network, you can enable the 'virt-network' USE flag.
-
-If you are using dnsmasq on your system, you will have to configure
-/etc/dnsmasq.conf to enable the following settings:
-	bind-interfaces
-	interface or except-interface
-Otherwise you might have issues with your existing DNS server.
-
-For openrc users:
-
-	Please use /etc/conf.d/libvirtd to control the '--listen' parameter for
-	libvirtd.
-
-	Use /etc/init.d/libvirt-guests to manage clients on restart/shutdown of
-	the host. The default configuration will suspend and resume running kvm
-	guests with 'managedsave'. This behavior can be changed under
-	/etc/conf.d/libvirt-guests
-
-For systemd users:
-
-	Please use /etc/systemd/system/libvirtd.service.d/00gentoo.conf
-	to control the '--listen' parameter for libvirtd.
-
-	The configuration for the 'libvirt-guests.service' is found under
-	/etc/libvirt/libvirt-guests.conf"
-
-! use policykit && DOC_CONTENTS+="
-
-To allow normal users to connect to libvirtd you must change the unix sock
-group and/or perms in /etc/libvirt/libvirtd.conf"
-
-use caps && use qemu && DOC_CONTENTS+="
-
-libvirt will now start qemu/kvm VMs with non-root privileges. Ensure any
-resources your VMs use are accessible by qemu:qemu"
-
-LXC_CONFIG_CHECK="
-	~CGROUPS
-	~CGROUP_FREEZER
-	~CGROUP_DEVICE
-	~CGROUP_CPUACCT
-	~CGROUP_SCHED
-	~CGROUP_PERF
-	~BLK_CGROUP
-	~NET_CLS_CGROUP
-	~CGROUP_NET_PRIO
-	~CPUSETS
-	~NAMESPACES
-	~UTS_NS
-	~IPC_NS
-	~PID_NS
-	~NET_NS
-	~USER_NS
-	~DEVPTS_MULTIPLE_INSTANCES
-	~VETH
-	~MACVLAN
-	~POSIX_MQUEUE
-	~SECURITYFS
-	~!GRKERNSEC_CHROOT_MOUNT
-	~!GRKERNSEC_CHROOT_DOUBLE
-	~!GRKERNSEC_CHROOT_PIVOT
-	~!GRKERNSEC_CHROOT_CHMOD
-	~!GRKERNSEC_CHROOT_CAPS
-"
-
-VIRTNET_CONFIG_CHECK="
-	~BRIDGE_NF_EBTABLES
-	~BRIDGE_EBT_MARK_T
-	~NETFILTER_ADVANCED
-	~NETFILTER_XT_TARGET_CHECKSUM
-	~NETFILTER_XT_CONNMARK
-	~NETFILTER_XT_MARK
-"
-
-BWLMT_CONFIG_CHECK="
-	~BRIDGE_EBT_T_NAT
-	~NET_SCH_HTB
-	~NET_SCH_SFQ
-	~NET_SCH_INGRESS
-	~NET_CLS_FW
-	~NET_CLS_U32
-	~NET_ACT_POLICE
-"
-
-MACVTAP_CONFIG_CHECK=" ~MACVTAP"
-
-LVM_CONFIG_CHECK=" ~BLK_DEV_DM ~DM_SNAPSHOT ~DM_MULTIPATH"
-
-ERROR_USER_NS="Optional depending on LXC configuration."
+	virtual/pkgconfig"
 
 pkg_setup() {
 	enewgroup qemu 77
@@ -234,18 +130,69 @@ pkg_setup() {
 		gpasswd -a qemu kvm
 	fi
 
-	# Handle specific kernel versions for different features
-	kernel_is lt 3 6 && LXC_CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
-	kernel_is ge 3 6 &&	LXC_CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
-
+	# Check kernel configuration:
 	CONFIG_CHECK=""
-	use fuse && CONFIG_CHECK+=" ~FUSE_FS"
-	use lvm && CONFIG_CHECK+="${LVM_CONFIG_CHECK}"
-	use lxc && CONFIG_CHECK+="${LXC_CONFIG_CHECK}"
-	use macvtap && CONFIG_CHECK+="${MACVTAP_CONFIG_CHECK}"
-	use virt-network && CONFIG_CHECK+="${VIRTNET_CONFIG_CHECK}"
+	use fuse && CONFIG_CHECK+="
+		~FUSE_FS"
+
+	use lvm && CONFIG_CHECK+="
+		~BLK_DEV_DM
+		~DM_MULTIPATH
+		~DM_SNAPSHOT"
+
+	use lxc && CONFIG_CHECK+="
+		~BLK_CGROUP
+		~CGROUP_CPUACCT
+		~CGROUP_DEVICE
+		~CGROUP_FREEZER
+		~CGROUP_NET_PRIO
+		~CGROUP_PERF
+		~CGROUPS
+		~CGROUP_SCHED
+		~CPUSETS
+		~DEVPTS_MULTIPLE_INSTANCES
+		~IPC_NS
+		~MACVLAN
+		~NAMESPACES
+		~NET_CLS_CGROUP
+		~NET_NS
+		~PID_NS
+		~POSIX_MQUEUE
+		~SECURITYFS
+		~USER_NS
+		~UTS_NS
+		~VETH
+		~!GRKERNSEC_CHROOT_MOUNT
+		~!GRKERNSEC_CHROOT_DOUBLE
+		~!GRKERNSEC_CHROOT_PIVOT
+		~!GRKERNSEC_CHROOT_CHMOD
+		~!GRKERNSEC_CHROOT_CAPS"
+	# Handle specific kernel versions for different features
+	kernel_is lt 3 6 && CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
+	kernel_is ge 3 6 && CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
+
+	use macvtap && CONFIG_CHECK+="
+		~MACVTAP"
+
+	use virt-network && CONFIG_CHECK+="
+		~BRIDGE_EBT_MARK_T
+		~BRIDGE_NF_EBTABLES
+		~NETFILTER_ADVANCED
+		~NETFILTER_XT_CONNMARK
+		~NETFILTER_XT_MARK
+		~NETFILTER_XT_TARGET_CHECKSUM"
 	# Bandwidth Limiting Support
-	use virt-network && CONFIG_CHECK+="${BWLMT_CONFIG_CHECK}"
+	use virt-network && CONFIG_CHECK+="
+		~BRIDGE_EBT_T_NAT
+		~NET_ACT_POLICE
+		~NET_CLS_FW
+		~NET_CLS_U32
+		~NET_SCH_HTB
+		~NET_SCH_INGRESS
+		~NET_SCH_SFQ"
+
+	ERROR_USER_NS="Optional depending on LXC configuration."
+
 	if [[ -n ${CONFIG_CHECK} ]]; then
 		linux-info_pkg_setup
 	fi
@@ -270,145 +217,91 @@ src_prepare() {
 		"${FILESDIR}"/${PN}-1.2.16-fix_paths_in_libvirt-guests_sh.patch \
 		"${FILESDIR}"/${PN}-1.2.17-fix_paths_for_apparmor.patch
 
-	[[ -n ${BACKPORTS} ]] && \
+	[[ -n ${BACKPORTS} ]] &&
 		EPATCH_FORCE=yes EPATCH_SUFFIX="patch" \
 			EPATCH_SOURCE="${WORKDIR}/patches" epatch
 
 	epatch_user
 
-	[[ -n ${AUTOTOOLIZE} ]] && eautoreconf
-
-	# Tweak the init script
-	local avahi_init=
-	local iscsi_init=
-	local rbd_init=
-	local firewalld_init=
-	cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init"
-	use avahi && avahi_init='avahi-daemon'
-	use iscsi && iscsi_init='iscsid'
-	use rbd && rbd_init='ceph'
-	use firewalld && firewalld_init='need firewalld'
-
-	sed -e "s/USE_FLAG_FIREWALLD/${firewalld_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_AVAHI/${avahi_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_ISCSI/${iscsi_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_RBD/${rbd_init}/" -i "${S}/libvirtd.init"
+	# Tweak the init script:
+	cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init" || die
+	sed -e "s/USE_FLAG_FIREWALLD/$(usex firewalld 'need firewalld' '')/" \
+		-e "s/USE_FLAG_AVAHI/$(usex avahi avahi-daemon '')/" \
+		-e "s/USE_FLAG_ISCSI/$(usex iscsi iscsid '')/" \
+		-e "s/USE_FLAG_RBD/$(usex rbd  ceph '')/" \
+		-i "${S}/libvirtd.init" || die "sed failed"
+
+	AUTOTOOLS_AUTORECONF=true
+	autotools-utils_src_prepare
 }
 
 src_configure() {
-	local myconf=""
-
-	## enable/disable daemon, otherwise client only utils
-	myconf+=" $(use_with libvirtd)"
-
-	## enable/disable the daemon using avahi to find VMs
-	myconf+=" $(use_with avahi)"
+	local myeconfargs=(
+		$(use_with apparmor)
+		$(use_with apparmor apparmor-profiles)
+		$(use_with audit)
+		$(use_with avahi)
+		$(use_with caps capng)
+		$(use_with firewalld)
+		$(use_with fuse)
+		$(use_with glusterfs)
+		$(use_with glusterfs storage-gluster)
+		$(use_with iscsi storage-iscsi)
+		$(use_with libvirtd)
+		$(use_with lvm storage-lvm)
+		$(use_with lvm storage-mpath)
+		$(use_with lxc)
+		$(use_with macvtap)
+		$(use_enable nls)
+		$(use_with numa numactl)
+		$(use_with numa numad)
+		$(use_with openvz)
+		$(use_with parted storage-disk)
+		$(use_with pcap libpcap)
+		$(use_with phyp)
+		$(use_with policykit polkit)
+		$(use_with qemu)
+		$(use_with qemu yajl)
+		$(use_with rbd storage-rbd)
+		$(use_with sasl)
+		$(use_with selinux)
+		$(use_with systemd systemd-daemon)
+		$(usex systemd --with-init-script=systemd '')
+		$(use_with udev)
+		$(use_with uml)
+		$(use_with vepa virtualport)
+		$(use_with virt-network network)
+		$(use_with wireshark-plugins wireshark-dissector)
+		$(use_with xen)
+		$(use_with xen xen-inotify)
+		$(usex xen --with-libxl '')
+
+		--without-hal
+		--without-netcf
+		--without-sanlock
+		--without-xenapi
+		--with-esx
+		--with-qemu-group=$(usex caps qemu root)
+		--with-qemu-user=$(usex caps qemu root)
+		--with-remote
+		--with-storage-fs
+		--with-vmware
+
+		--disable-static
+		--disable-werror
+
+		--docdir=/usr/share/doc/${PF}
+		--htmldir=/usr/share/doc/${PF}/html
+		--localstatedir=/var
+	)
 
-	## hypervisors on the local host
-	myconf+=" $(use_with xen) $(use_with xen xen-inotify)"
-	myconf+=" --without-xenapi"
-	if use xen && has_version ">=app-emulation/xen-tools-4.2.0"; then
-		myconf+=" --with-libxl"
-	else
-		myconf+=" --without-libxl"
-	fi
-	myconf+=" $(use_with openvz)"
-	myconf+=" $(use_with lxc)"
 	if use virtualbox && has_version app-emulation/virtualbox-ose; then
-		myconf+=" --with-vbox=/usr/lib/virtualbox-ose/"
-	else
-		myconf+=" $(use_with virtualbox vbox)"
-	fi
-	myconf+=" $(use_with uml)"
-	myconf+=" $(use_with qemu)"
-	myconf+=" $(use_with qemu yajl)" # Use QMP over HMP
-	myconf+=" $(use_with phyp)"
-	myconf+=" --with-esx"
-	myconf+=" --with-vmware"
-
-	## additional host drivers
-	myconf+=" $(use_with apparmor)"
-	myconf+=" $(use_with apparmor apparmor-profiles)"
-	myconf+=" $(use_with virt-network network)"
-	myconf+=" --with-storage-fs"
-	myconf+=" $(use_with lvm storage-lvm)"
-	myconf+=" $(use_with iscsi storage-iscsi)"
-	myconf+=" $(use_with parted storage-disk)"
-	myconf+=" $(use_with glusterfs)"
-	myconf+=" $(use_with glusterfs storage-gluster)"
-	myconf+=" $(use_with lvm storage-mpath)"
-	myconf+=" $(use_with rbd storage-rbd)"
-	myconf+=" $(use_with numa numactl)"
-	myconf+=" $(use_with numa numad)"
-	myconf+=" $(use_with selinux)"
-	myconf+=" $(use_with fuse)"
-
-	# udev for device support details
-	myconf+=" $(use_with udev)"
-	myconf+=" --without-hal"
-
-	# linux capability support so we don't need privileged accounts
-	myconf+=" $(use_with caps capng)"
-
-	## auth stuff
-	myconf+=" $(use_with policykit polkit)"
-	myconf+=" $(use_with sasl)"
-
-	# network bits
-	myconf+=" $(use_with macvtap)"
-	myconf+=" $(use_with pcap libpcap)"
-	myconf+=" $(use_with vepa virtualport)"
-	myconf+=" $(use_with firewalld)"
-
-	## other
-	myconf+=" $(use_enable nls)"
-
-	# user privilege bits fir qemu/kvm
-	if use caps; then
-		myconf+=" --with-qemu-user=qemu"
-		myconf+=" --with-qemu-group=qemu"
+		myeconfargs+=( --with-vbox=/usr/lib/virtualbox-ose/ )
 	else
-		myconf+=" --with-qemu-user=root"
-		myconf+=" --with-qemu-group=root"
+		myeconfargs+=( $(use_with virtualbox vbox) )
 	fi
 
-	# audit support
-	myconf+=" $(use_with audit)"
-
-	# wireshark dissector
-	myconf+=" $(use_with wireshark-plugins wireshark-dissector)"
-
-	## stuff we don't yet support
-	myconf+=" --without-netcf"
-
-	# locking support
-	myconf+=" --without-sanlock"
-
-	# systemd unit files
-	myconf+=" $(use_with systemd systemd-daemon)"
-	use systemd && myconf+=" --with-init-script=systemd"
-
-	# this is a nasty trick to work around the problem in bug
-	# #275073. The reason why we don't solve this properly is that
-	# it'll require us to rebuild autotools (and we don't really want
-	# to do that right now). The proper solution has been sent
-	# upstream and should hopefully land in 0.7.7, in the mean time,
-	# mime the same functionality with this.
-	case ${CHOST} in
-		*cygwin* | *mingw* )
-			;;
-		*)
-			ac_cv_prog_WINDRES=no
-			;;
-	esac
-
-	econf \
-		${myconf} \
-		--disable-static \
-		--disable-werror \
-		--with-remote \
-		--docdir=/usr/share/doc/${PF} \
-		--localstatedir=/var
+	autotools-utils_src_configure
 
 	if [[ ${PV} = *9999* ]]; then
 		# Restore gnulib's config.sub and config.guess
@@ -424,13 +317,9 @@ src_test() {
 }
 
 src_install() {
-	emake install \
+	autotools-utils_src_compile install \
 		DESTDIR="${D}" \
-		HTML_DIR=/usr/share/doc/${PF}/html \
-		DOCS_DIR=/usr/share/doc/${PF} \
-		EXAMPLE_DIR=/usr/share/doc/${PF}/examples \
-		SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)" \
-		|| die "emake install failed"
+		SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)"
 
 	find "${D}" -name '*.la' -delete || die
 
@@ -456,6 +345,8 @@ src_install() {
 	newconfd "${FILESDIR}/libvirtd.confd-r5" libvirtd || die
 	newconfd "${FILESDIR}/libvirt-guests.confd" libvirt-guests || die
 
+	DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+	DISABLE_AUTOFORMATTING=true
 	readme.gentoo_create_doc
 }
 
@@ -464,16 +355,6 @@ pkg_preinst() {
 	if [[ -e "${ROOT}"/etc/libvirt/qemu/networks/default.xml ]]; then
 		rm -rf "${D}"/etc/libvirt/qemu/networks/default.xml
 	fi
-
-	# We really don't want to use or support old PolicyKit cause it
-	# screws with the new polkit integration
-	if has_version sys-auth/policykit; then
-		rm -rf "${D}"/usr/share/PolicyKit/policy/org.libvirt.unix.policy
-	fi
-
-	# Only sysctl files ending in .conf work
-	dodir /etc/sysctl.d
-	mv "${D}"/usr/lib/sysctl.d/libvirtd.conf "${D}"/etc/sysctl.d/libvirtd.conf
 }
 
 pkg_postinst() {
@@ -488,5 +369,7 @@ pkg_postinst() {
 		FORCE_PRINT_ELOG=true
 	fi
 
+	DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+	DISABLE_AUTOFORMATTING=true
 	readme.gentoo_print_elog
 }
diff --git a/app-emulation/libvirt/libvirt-1.2.20.ebuild b/app-emulation/libvirt/libvirt-1.2.20.ebuild
index b949b33fa68..f345b060454 100644
--- a/app-emulation/libvirt/libvirt-1.2.20.ebuild
+++ b/app-emulation/libvirt/libvirt-1.2.20.ebuild
@@ -4,11 +4,7 @@
 
 EAPI=5
 
-AUTOTOOLIZE=yes
-
-MY_P="${P/_rc/-rc}"
-
-inherit eutils user autotools linux-info systemd readme.gentoo
+inherit eutils user autotools-utils linux-info systemd readme.gentoo
 
 BACKPORTS=""
 
@@ -21,9 +17,9 @@ if [[ ${PV} = *9999* ]]; then
 else
 	# Versions with 4 numbers are stable updates:
 	if [[ ${PV} =~ ^[0-9]+(\.[0-9]+){3} ]]; then
-		SRC_URI="http://libvirt.org/sources/stable_updates/${MY_P}.tar.gz"
+		SRC_URI="http://libvirt.org/sources/stable_updates/${P}.tar.gz"
 	else
-		SRC_URI="http://libvirt.org/sources/${MY_P}.tar.gz"
+		SRC_URI="http://libvirt.org/sources/${P}.tar.gz"
 	fi
 	SRC_URI+=" ${BACKPORTS:+
 		https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz
@@ -31,45 +27,46 @@ else
 	KEYWORDS="~amd64 ~x86"
 	SLOT="0/${PV}"
 fi
-S="${WORKDIR}/${P%_rc*}"
 
 DESCRIPTION="C toolkit to manipulate virtual machines"
 HOMEPAGE="http://www.libvirt.org/"
 LICENSE="LGPL-2.1"
-# TODO: Reenable IUSE wireshark-plugins
 IUSE="apparmor audit avahi +caps firewalld fuse glusterfs iscsi +libvirtd lvm \
 	lxc +macvtap nfs nls numa openvz parted pcap phyp policykit +qemu rbd sasl \
-	selinux +udev uml +vepa virtualbox virt-network wireshark-plugins xen \
-	elibc_glibc systemd"
-REQUIRED_USE="libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
+	selinux systemd +udev uml +vepa virtualbox virt-network wireshark-plugins \
+	xen elibc_glibc"
+
+REQUIRED_USE="
+	firewalld? ( virt-network )
+	libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
 	lxc? ( caps libvirtd )
 	openvz? ( libvirtd )
 	qemu? ( libvirtd )
 	uml? ( libvirtd )
 	vepa? ( macvtap )
-	virtualbox? ( libvirtd )
-	xen? ( libvirtd )
 	virt-network? ( libvirtd )
-	firewalld? ( virt-network )"
+	virtualbox? ( libvirtd )
+	xen? ( libvirtd )"
 
 # gettext.sh command is used by the libvirt command wrappers, and it's
 # non-optional, so put it into RDEPEND.
 # We can use both libnl:1.1 and libnl:3, but if you have both installed, the
 # package will use 3 by default. Since we don't have slot pinning in an API,
 # we must go with the most recent
-RDEPEND="sys-libs/readline:=
-	sys-libs/ncurses:0=
-	>=net-misc/curl-7.18.0
+RDEPEND="
+	app-misc/scrub
 	dev-libs/libgcrypt:0
-	>=dev-libs/libxml2-2.7.6
 	dev-libs/libnl:3
+	>=dev-libs/libxml2-2.7.6
+	>=net-analyzer/netcat6-1.0-r2
 	>=net-libs/gnutls-1.0.25
 	net-libs/libssh2
+	>=net-misc/curl-7.18.0
 	sys-apps/dmidecode
 	>=sys-apps/util-linux-2.17
 	sys-devel/gettext
-	>=net-analyzer/netcat6-1.0-r2
-	app-misc/scrub
+	sys-libs/ncurses:0=
+	sys-libs/readline:=
 	apparmor? ( sys-libs/libapparmor )
 	audit? ( sys-process/audit )
 	avahi? ( >=net-dns/avahi-0.6[dbus] )
@@ -77,8 +74,8 @@ RDEPEND="sys-libs/readline:=
 	fuse? ( >=sys-fs/fuse-2.8.6 )
 	glusterfs? ( >=sys-cluster/glusterfs-3.4.1 )
 	iscsi? ( sys-block/open-iscsi )
-	lxc? ( !systemd? ( sys-power/pm-utils ) )
 	lvm? ( >=sys-fs/lvm2-2.02.48-r2 )
+	lxc? ( !systemd? ( sys-power/pm-utils ) )
 	nfs? ( net-fs/nfs-utils )
 	numa? (
 		>sys-process/numactl-2.0.2
@@ -100,127 +97,26 @@ RDEPEND="sys-libs/readline:=
 	sasl? ( dev-libs/cyrus-sasl )
 	selinux? ( >=sys-libs/libselinux-2.0.85 )
 	systemd? ( sys-apps/systemd )
-	virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
-	wireshark-plugins? ( net-analyzer/wireshark:= )
-	xen? ( app-emulation/xen-tools app-emulation/xen )
-	udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
-	virt-network? ( net-dns/dnsmasq[script]
+	virt-network? (
+		net-dns/dnsmasq[script]
 		net-firewall/ebtables
 		>=net-firewall/iptables-1.4.10[ipv6]
 		net-misc/radvd
 		sys-apps/iproute2[-minimal]
 		firewalld? ( net-firewall/firewalld )
 	)
+	virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
+	wireshark-plugins? ( net-analyzer/wireshark:= )
+	xen? ( app-emulation/xen-tools app-emulation/xen )
+	udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
 	elibc_glibc? ( || ( >=net-libs/libtirpc-0.2.2-r1 <sys-libs/glibc-2.14 ) )"
 
 DEPEND="${RDEPEND}
-	virtual/pkgconfig
 	app-text/xhtml1
 	dev-lang/perl
+	dev-libs/libxslt
 	dev-perl/XML-XPath
-	dev-libs/libxslt"
-
-# gentoo.readme stuff:
-DISABLE_AUTOFORMATTING=true
-DOC_CONTENTS="Important: The openrc libvirtd init script is now broken up into two
-separate services: libvirtd, that solely handles the daemon, and
-libvirt-guests, that takes care of clients during shutdown/restart of the
-host. In order to reenable client handling, edit /etc/conf.d/libvirt-guests
-and enable the service and start it:
-	$ rc-update add libvirt-guests
-	$ service libvirt-guests start
-
-For the basic networking support (bridged and routed networks) you don't
-need any extra software. For more complex network modes including but not
-limited to NATed network, you can enable the 'virt-network' USE flag.
-
-If you are using dnsmasq on your system, you will have to configure
-/etc/dnsmasq.conf to enable the following settings:
-	bind-interfaces
-	interface or except-interface
-Otherwise you might have issues with your existing DNS server.
-
-For openrc users:
-
-	Please use /etc/conf.d/libvirtd to control the '--listen' parameter for
-	libvirtd.
-
-	Use /etc/init.d/libvirt-guests to manage clients on restart/shutdown of
-	the host. The default configuration will suspend and resume running kvm
-	guests with 'managedsave'. This behavior can be changed under
-	/etc/conf.d/libvirt-guests
-
-For systemd users:
-
-	Please use /etc/systemd/system/libvirtd.service.d/00gentoo.conf
-	to control the '--listen' parameter for libvirtd.
-
-	The configuration for the 'libvirt-guests.service' is found under
-	/etc/libvirt/libvirt-guests.conf"
-
-! use policykit && DOC_CONTENTS+="
-
-To allow normal users to connect to libvirtd you must change the unix sock
-group and/or perms in /etc/libvirt/libvirtd.conf"
-
-use caps && use qemu && DOC_CONTENTS+="
-
-libvirt will now start qemu/kvm VMs with non-root privileges. Ensure any
-resources your VMs use are accessible by qemu:qemu"
-
-LXC_CONFIG_CHECK="
-	~CGROUPS
-	~CGROUP_FREEZER
-	~CGROUP_DEVICE
-	~CGROUP_CPUACCT
-	~CGROUP_SCHED
-	~CGROUP_PERF
-	~BLK_CGROUP
-	~NET_CLS_CGROUP
-	~CGROUP_NET_PRIO
-	~CPUSETS
-	~NAMESPACES
-	~UTS_NS
-	~IPC_NS
-	~PID_NS
-	~NET_NS
-	~USER_NS
-	~DEVPTS_MULTIPLE_INSTANCES
-	~VETH
-	~MACVLAN
-	~POSIX_MQUEUE
-	~SECURITYFS
-	~!GRKERNSEC_CHROOT_MOUNT
-	~!GRKERNSEC_CHROOT_DOUBLE
-	~!GRKERNSEC_CHROOT_PIVOT
-	~!GRKERNSEC_CHROOT_CHMOD
-	~!GRKERNSEC_CHROOT_CAPS
-"
-
-VIRTNET_CONFIG_CHECK="
-	~BRIDGE_NF_EBTABLES
-	~BRIDGE_EBT_MARK_T
-	~NETFILTER_ADVANCED
-	~NETFILTER_XT_TARGET_CHECKSUM
-	~NETFILTER_XT_CONNMARK
-	~NETFILTER_XT_MARK
-"
-
-BWLMT_CONFIG_CHECK="
-	~BRIDGE_EBT_T_NAT
-	~NET_SCH_HTB
-	~NET_SCH_SFQ
-	~NET_SCH_INGRESS
-	~NET_CLS_FW
-	~NET_CLS_U32
-	~NET_ACT_POLICE
-"
-
-MACVTAP_CONFIG_CHECK=" ~MACVTAP"
-
-LVM_CONFIG_CHECK=" ~BLK_DEV_DM ~DM_SNAPSHOT ~DM_MULTIPATH"
-
-ERROR_USER_NS="Optional depending on LXC configuration."
+	virtual/pkgconfig"
 
 pkg_setup() {
 	enewgroup qemu 77
@@ -234,18 +130,69 @@ pkg_setup() {
 		gpasswd -a qemu kvm
 	fi
 
-	# Handle specific kernel versions for different features
-	kernel_is lt 3 6 && LXC_CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
-	kernel_is ge 3 6 &&	LXC_CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
-
+	# Check kernel configuration:
 	CONFIG_CHECK=""
-	use fuse && CONFIG_CHECK+=" ~FUSE_FS"
-	use lvm && CONFIG_CHECK+="${LVM_CONFIG_CHECK}"
-	use lxc && CONFIG_CHECK+="${LXC_CONFIG_CHECK}"
-	use macvtap && CONFIG_CHECK+="${MACVTAP_CONFIG_CHECK}"
-	use virt-network && CONFIG_CHECK+="${VIRTNET_CONFIG_CHECK}"
+	use fuse && CONFIG_CHECK+="
+		~FUSE_FS"
+
+	use lvm && CONFIG_CHECK+="
+		~BLK_DEV_DM
+		~DM_MULTIPATH
+		~DM_SNAPSHOT"
+
+	use lxc && CONFIG_CHECK+="
+		~BLK_CGROUP
+		~CGROUP_CPUACCT
+		~CGROUP_DEVICE
+		~CGROUP_FREEZER
+		~CGROUP_NET_PRIO
+		~CGROUP_PERF
+		~CGROUPS
+		~CGROUP_SCHED
+		~CPUSETS
+		~DEVPTS_MULTIPLE_INSTANCES
+		~IPC_NS
+		~MACVLAN
+		~NAMESPACES
+		~NET_CLS_CGROUP
+		~NET_NS
+		~PID_NS
+		~POSIX_MQUEUE
+		~SECURITYFS
+		~USER_NS
+		~UTS_NS
+		~VETH
+		~!GRKERNSEC_CHROOT_MOUNT
+		~!GRKERNSEC_CHROOT_DOUBLE
+		~!GRKERNSEC_CHROOT_PIVOT
+		~!GRKERNSEC_CHROOT_CHMOD
+		~!GRKERNSEC_CHROOT_CAPS"
+	# Handle specific kernel versions for different features
+	kernel_is lt 3 6 && CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
+	kernel_is ge 3 6 && CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
+
+	use macvtap && CONFIG_CHECK+="
+		~MACVTAP"
+
+	use virt-network && CONFIG_CHECK+="
+		~BRIDGE_EBT_MARK_T
+		~BRIDGE_NF_EBTABLES
+		~NETFILTER_ADVANCED
+		~NETFILTER_XT_CONNMARK
+		~NETFILTER_XT_MARK
+		~NETFILTER_XT_TARGET_CHECKSUM"
 	# Bandwidth Limiting Support
-	use virt-network && CONFIG_CHECK+="${BWLMT_CONFIG_CHECK}"
+	use virt-network && CONFIG_CHECK+="
+		~BRIDGE_EBT_T_NAT
+		~NET_ACT_POLICE
+		~NET_CLS_FW
+		~NET_CLS_U32
+		~NET_SCH_HTB
+		~NET_SCH_INGRESS
+		~NET_SCH_SFQ"
+
+	ERROR_USER_NS="Optional depending on LXC configuration."
+
 	if [[ -n ${CONFIG_CHECK} ]]; then
 		linux-info_pkg_setup
 	fi
@@ -270,145 +217,91 @@ src_prepare() {
 		"${FILESDIR}"/${PN}-1.2.16-fix_paths_in_libvirt-guests_sh.patch \
 		"${FILESDIR}"/${PN}-1.2.17-fix_paths_for_apparmor.patch
 
-	[[ -n ${BACKPORTS} ]] && \
+	[[ -n ${BACKPORTS} ]] &&
 		EPATCH_FORCE=yes EPATCH_SUFFIX="patch" \
 			EPATCH_SOURCE="${WORKDIR}/patches" epatch
 
 	epatch_user
 
-	[[ -n ${AUTOTOOLIZE} ]] && eautoreconf
-
-	# Tweak the init script
-	local avahi_init=
-	local iscsi_init=
-	local rbd_init=
-	local firewalld_init=
-	cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init"
-	use avahi && avahi_init='avahi-daemon'
-	use iscsi && iscsi_init='iscsid'
-	use rbd && rbd_init='ceph'
-	use firewalld && firewalld_init='need firewalld'
-
-	sed -e "s/USE_FLAG_FIREWALLD/${firewalld_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_AVAHI/${avahi_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_ISCSI/${iscsi_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_RBD/${rbd_init}/" -i "${S}/libvirtd.init"
+	# Tweak the init script:
+	cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init" || die
+	sed -e "s/USE_FLAG_FIREWALLD/$(usex firewalld 'need firewalld' '')/" \
+		-e "s/USE_FLAG_AVAHI/$(usex avahi avahi-daemon '')/" \
+		-e "s/USE_FLAG_ISCSI/$(usex iscsi iscsid '')/" \
+		-e "s/USE_FLAG_RBD/$(usex rbd  ceph '')/" \
+		-i "${S}/libvirtd.init" || die "sed failed"
+
+	AUTOTOOLS_AUTORECONF=true
+	autotools-utils_src_prepare
 }
 
 src_configure() {
-	local myconf=""
-
-	## enable/disable daemon, otherwise client only utils
-	myconf+=" $(use_with libvirtd)"
-
-	## enable/disable the daemon using avahi to find VMs
-	myconf+=" $(use_with avahi)"
+	local myeconfargs=(
+		$(use_with apparmor)
+		$(use_with apparmor apparmor-profiles)
+		$(use_with audit)
+		$(use_with avahi)
+		$(use_with caps capng)
+		$(use_with firewalld)
+		$(use_with fuse)
+		$(use_with glusterfs)
+		$(use_with glusterfs storage-gluster)
+		$(use_with iscsi storage-iscsi)
+		$(use_with libvirtd)
+		$(use_with lvm storage-lvm)
+		$(use_with lvm storage-mpath)
+		$(use_with lxc)
+		$(use_with macvtap)
+		$(use_enable nls)
+		$(use_with numa numactl)
+		$(use_with numa numad)
+		$(use_with openvz)
+		$(use_with parted storage-disk)
+		$(use_with pcap libpcap)
+		$(use_with phyp)
+		$(use_with policykit polkit)
+		$(use_with qemu)
+		$(use_with qemu yajl)
+		$(use_with rbd storage-rbd)
+		$(use_with sasl)
+		$(use_with selinux)
+		$(use_with systemd systemd-daemon)
+		$(usex systemd --with-init-script=systemd '')
+		$(use_with udev)
+		$(use_with uml)
+		$(use_with vepa virtualport)
+		$(use_with virt-network network)
+		$(use_with wireshark-plugins wireshark-dissector)
+		$(use_with xen)
+		$(use_with xen xen-inotify)
+		$(usex xen --with-libxl '')
+
+		--without-hal
+		--without-netcf
+		--without-sanlock
+		--without-xenapi
+		--with-esx
+		--with-qemu-group=$(usex caps qemu root)
+		--with-qemu-user=$(usex caps qemu root)
+		--with-remote
+		--with-storage-fs
+		--with-vmware
+
+		--disable-static
+		--disable-werror
+
+		--docdir=/usr/share/doc/${PF}
+		--htmldir=/usr/share/doc/${PF}/html
+		--localstatedir=/var
+	)
 
-	## hypervisors on the local host
-	myconf+=" $(use_with xen) $(use_with xen xen-inotify)"
-	myconf+=" --without-xenapi"
-	if use xen && has_version ">=app-emulation/xen-tools-4.2.0"; then
-		myconf+=" --with-libxl"
-	else
-		myconf+=" --without-libxl"
-	fi
-	myconf+=" $(use_with openvz)"
-	myconf+=" $(use_with lxc)"
 	if use virtualbox && has_version app-emulation/virtualbox-ose; then
-		myconf+=" --with-vbox=/usr/lib/virtualbox-ose/"
-	else
-		myconf+=" $(use_with virtualbox vbox)"
-	fi
-	myconf+=" $(use_with uml)"
-	myconf+=" $(use_with qemu)"
-	myconf+=" $(use_with qemu yajl)" # Use QMP over HMP
-	myconf+=" $(use_with phyp)"
-	myconf+=" --with-esx"
-	myconf+=" --with-vmware"
-
-	## additional host drivers
-	myconf+=" $(use_with apparmor)"
-	myconf+=" $(use_with apparmor apparmor-profiles)"
-	myconf+=" $(use_with virt-network network)"
-	myconf+=" --with-storage-fs"
-	myconf+=" $(use_with lvm storage-lvm)"
-	myconf+=" $(use_with iscsi storage-iscsi)"
-	myconf+=" $(use_with parted storage-disk)"
-	myconf+=" $(use_with glusterfs)"
-	myconf+=" $(use_with glusterfs storage-gluster)"
-	myconf+=" $(use_with lvm storage-mpath)"
-	myconf+=" $(use_with rbd storage-rbd)"
-	myconf+=" $(use_with numa numactl)"
-	myconf+=" $(use_with numa numad)"
-	myconf+=" $(use_with selinux)"
-	myconf+=" $(use_with fuse)"
-
-	# udev for device support details
-	myconf+=" $(use_with udev)"
-	myconf+=" --without-hal"
-
-	# linux capability support so we don't need privileged accounts
-	myconf+=" $(use_with caps capng)"
-
-	## auth stuff
-	myconf+=" $(use_with policykit polkit)"
-	myconf+=" $(use_with sasl)"
-
-	# network bits
-	myconf+=" $(use_with macvtap)"
-	myconf+=" $(use_with pcap libpcap)"
-	myconf+=" $(use_with vepa virtualport)"
-	myconf+=" $(use_with firewalld)"
-
-	## other
-	myconf+=" $(use_enable nls)"
-
-	# user privilege bits fir qemu/kvm
-	if use caps; then
-		myconf+=" --with-qemu-user=qemu"
-		myconf+=" --with-qemu-group=qemu"
+		myeconfargs+=( --with-vbox=/usr/lib/virtualbox-ose/ )
 	else
-		myconf+=" --with-qemu-user=root"
-		myconf+=" --with-qemu-group=root"
+		myeconfargs+=( $(use_with virtualbox vbox) )
 	fi
 
-	# audit support
-	myconf+=" $(use_with audit)"
-
-	# wireshark dissector
-	myconf+=" $(use_with wireshark-plugins wireshark-dissector)"
-
-	## stuff we don't yet support
-	myconf+=" --without-netcf"
-
-	# locking support
-	myconf+=" --without-sanlock"
-
-	# systemd unit files
-	myconf+=" $(use_with systemd systemd-daemon)"
-	use systemd && myconf+=" --with-init-script=systemd"
-
-	# this is a nasty trick to work around the problem in bug
-	# #275073. The reason why we don't solve this properly is that
-	# it'll require us to rebuild autotools (and we don't really want
-	# to do that right now). The proper solution has been sent
-	# upstream and should hopefully land in 0.7.7, in the mean time,
-	# mime the same functionality with this.
-	case ${CHOST} in
-		*cygwin* | *mingw* )
-			;;
-		*)
-			ac_cv_prog_WINDRES=no
-			;;
-	esac
-
-	econf \
-		${myconf} \
-		--disable-static \
-		--disable-werror \
-		--with-remote \
-		--docdir=/usr/share/doc/${PF} \
-		--localstatedir=/var
+	autotools-utils_src_configure
 
 	if [[ ${PV} = *9999* ]]; then
 		# Restore gnulib's config.sub and config.guess
@@ -424,13 +317,9 @@ src_test() {
 }
 
 src_install() {
-	emake install \
+	autotools-utils_src_compile install \
 		DESTDIR="${D}" \
-		HTML_DIR=/usr/share/doc/${PF}/html \
-		DOCS_DIR=/usr/share/doc/${PF} \
-		EXAMPLE_DIR=/usr/share/doc/${PF}/examples \
-		SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)" \
-		|| die "emake install failed"
+		SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)"
 
 	find "${D}" -name '*.la' -delete || die
 
@@ -456,6 +345,8 @@ src_install() {
 	newconfd "${FILESDIR}/libvirtd.confd-r5" libvirtd || die
 	newconfd "${FILESDIR}/libvirt-guests.confd" libvirt-guests || die
 
+	DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+	DISABLE_AUTOFORMATTING=true
 	readme.gentoo_create_doc
 }
 
@@ -464,16 +355,6 @@ pkg_preinst() {
 	if [[ -e "${ROOT}"/etc/libvirt/qemu/networks/default.xml ]]; then
 		rm -rf "${D}"/etc/libvirt/qemu/networks/default.xml
 	fi
-
-	# We really don't want to use or support old PolicyKit cause it
-	# screws with the new polkit integration
-	if has_version sys-auth/policykit; then
-		rm -rf "${D}"/usr/share/PolicyKit/policy/org.libvirt.unix.policy
-	fi
-
-	# Only sysctl files ending in .conf work
-	dodir /etc/sysctl.d
-	mv "${D}"/usr/lib/sysctl.d/libvirtd.conf "${D}"/etc/sysctl.d/libvirtd.conf
 }
 
 pkg_postinst() {
@@ -488,5 +369,7 @@ pkg_postinst() {
 		FORCE_PRINT_ELOG=true
 	fi
 
+	DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+	DISABLE_AUTOFORMATTING=true
 	readme.gentoo_print_elog
 }
diff --git a/app-emulation/libvirt/libvirt-9999.ebuild b/app-emulation/libvirt/libvirt-9999.ebuild
index b949b33fa68..f345b060454 100644
--- a/app-emulation/libvirt/libvirt-9999.ebuild
+++ b/app-emulation/libvirt/libvirt-9999.ebuild
@@ -4,11 +4,7 @@
 
 EAPI=5
 
-AUTOTOOLIZE=yes
-
-MY_P="${P/_rc/-rc}"
-
-inherit eutils user autotools linux-info systemd readme.gentoo
+inherit eutils user autotools-utils linux-info systemd readme.gentoo
 
 BACKPORTS=""
 
@@ -21,9 +17,9 @@ if [[ ${PV} = *9999* ]]; then
 else
 	# Versions with 4 numbers are stable updates:
 	if [[ ${PV} =~ ^[0-9]+(\.[0-9]+){3} ]]; then
-		SRC_URI="http://libvirt.org/sources/stable_updates/${MY_P}.tar.gz"
+		SRC_URI="http://libvirt.org/sources/stable_updates/${P}.tar.gz"
 	else
-		SRC_URI="http://libvirt.org/sources/${MY_P}.tar.gz"
+		SRC_URI="http://libvirt.org/sources/${P}.tar.gz"
 	fi
 	SRC_URI+=" ${BACKPORTS:+
 		https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz
@@ -31,45 +27,46 @@ else
 	KEYWORDS="~amd64 ~x86"
 	SLOT="0/${PV}"
 fi
-S="${WORKDIR}/${P%_rc*}"
 
 DESCRIPTION="C toolkit to manipulate virtual machines"
 HOMEPAGE="http://www.libvirt.org/"
 LICENSE="LGPL-2.1"
-# TODO: Reenable IUSE wireshark-plugins
 IUSE="apparmor audit avahi +caps firewalld fuse glusterfs iscsi +libvirtd lvm \
 	lxc +macvtap nfs nls numa openvz parted pcap phyp policykit +qemu rbd sasl \
-	selinux +udev uml +vepa virtualbox virt-network wireshark-plugins xen \
-	elibc_glibc systemd"
-REQUIRED_USE="libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
+	selinux systemd +udev uml +vepa virtualbox virt-network wireshark-plugins \
+	xen elibc_glibc"
+
+REQUIRED_USE="
+	firewalld? ( virt-network )
+	libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
 	lxc? ( caps libvirtd )
 	openvz? ( libvirtd )
 	qemu? ( libvirtd )
 	uml? ( libvirtd )
 	vepa? ( macvtap )
-	virtualbox? ( libvirtd )
-	xen? ( libvirtd )
 	virt-network? ( libvirtd )
-	firewalld? ( virt-network )"
+	virtualbox? ( libvirtd )
+	xen? ( libvirtd )"
 
 # gettext.sh command is used by the libvirt command wrappers, and it's
 # non-optional, so put it into RDEPEND.
 # We can use both libnl:1.1 and libnl:3, but if you have both installed, the
 # package will use 3 by default. Since we don't have slot pinning in an API,
 # we must go with the most recent
-RDEPEND="sys-libs/readline:=
-	sys-libs/ncurses:0=
-	>=net-misc/curl-7.18.0
+RDEPEND="
+	app-misc/scrub
 	dev-libs/libgcrypt:0
-	>=dev-libs/libxml2-2.7.6
 	dev-libs/libnl:3
+	>=dev-libs/libxml2-2.7.6
+	>=net-analyzer/netcat6-1.0-r2
 	>=net-libs/gnutls-1.0.25
 	net-libs/libssh2
+	>=net-misc/curl-7.18.0
 	sys-apps/dmidecode
 	>=sys-apps/util-linux-2.17
 	sys-devel/gettext
-	>=net-analyzer/netcat6-1.0-r2
-	app-misc/scrub
+	sys-libs/ncurses:0=
+	sys-libs/readline:=
 	apparmor? ( sys-libs/libapparmor )
 	audit? ( sys-process/audit )
 	avahi? ( >=net-dns/avahi-0.6[dbus] )
@@ -77,8 +74,8 @@ RDEPEND="sys-libs/readline:=
 	fuse? ( >=sys-fs/fuse-2.8.6 )
 	glusterfs? ( >=sys-cluster/glusterfs-3.4.1 )
 	iscsi? ( sys-block/open-iscsi )
-	lxc? ( !systemd? ( sys-power/pm-utils ) )
 	lvm? ( >=sys-fs/lvm2-2.02.48-r2 )
+	lxc? ( !systemd? ( sys-power/pm-utils ) )
 	nfs? ( net-fs/nfs-utils )
 	numa? (
 		>sys-process/numactl-2.0.2
@@ -100,127 +97,26 @@ RDEPEND="sys-libs/readline:=
 	sasl? ( dev-libs/cyrus-sasl )
 	selinux? ( >=sys-libs/libselinux-2.0.85 )
 	systemd? ( sys-apps/systemd )
-	virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
-	wireshark-plugins? ( net-analyzer/wireshark:= )
-	xen? ( app-emulation/xen-tools app-emulation/xen )
-	udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
-	virt-network? ( net-dns/dnsmasq[script]
+	virt-network? (
+		net-dns/dnsmasq[script]
 		net-firewall/ebtables
 		>=net-firewall/iptables-1.4.10[ipv6]
 		net-misc/radvd
 		sys-apps/iproute2[-minimal]
 		firewalld? ( net-firewall/firewalld )
 	)
+	virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
+	wireshark-plugins? ( net-analyzer/wireshark:= )
+	xen? ( app-emulation/xen-tools app-emulation/xen )
+	udev? ( virtual/udev >=x11-libs/libpciaccess-0.10.9 )
 	elibc_glibc? ( || ( >=net-libs/libtirpc-0.2.2-r1 <sys-libs/glibc-2.14 ) )"
 
 DEPEND="${RDEPEND}
-	virtual/pkgconfig
 	app-text/xhtml1
 	dev-lang/perl
+	dev-libs/libxslt
 	dev-perl/XML-XPath
-	dev-libs/libxslt"
-
-# gentoo.readme stuff:
-DISABLE_AUTOFORMATTING=true
-DOC_CONTENTS="Important: The openrc libvirtd init script is now broken up into two
-separate services: libvirtd, that solely handles the daemon, and
-libvirt-guests, that takes care of clients during shutdown/restart of the
-host. In order to reenable client handling, edit /etc/conf.d/libvirt-guests
-and enable the service and start it:
-	$ rc-update add libvirt-guests
-	$ service libvirt-guests start
-
-For the basic networking support (bridged and routed networks) you don't
-need any extra software. For more complex network modes including but not
-limited to NATed network, you can enable the 'virt-network' USE flag.
-
-If you are using dnsmasq on your system, you will have to configure
-/etc/dnsmasq.conf to enable the following settings:
-	bind-interfaces
-	interface or except-interface
-Otherwise you might have issues with your existing DNS server.
-
-For openrc users:
-
-	Please use /etc/conf.d/libvirtd to control the '--listen' parameter for
-	libvirtd.
-
-	Use /etc/init.d/libvirt-guests to manage clients on restart/shutdown of
-	the host. The default configuration will suspend and resume running kvm
-	guests with 'managedsave'. This behavior can be changed under
-	/etc/conf.d/libvirt-guests
-
-For systemd users:
-
-	Please use /etc/systemd/system/libvirtd.service.d/00gentoo.conf
-	to control the '--listen' parameter for libvirtd.
-
-	The configuration for the 'libvirt-guests.service' is found under
-	/etc/libvirt/libvirt-guests.conf"
-
-! use policykit && DOC_CONTENTS+="
-
-To allow normal users to connect to libvirtd you must change the unix sock
-group and/or perms in /etc/libvirt/libvirtd.conf"
-
-use caps && use qemu && DOC_CONTENTS+="
-
-libvirt will now start qemu/kvm VMs with non-root privileges. Ensure any
-resources your VMs use are accessible by qemu:qemu"
-
-LXC_CONFIG_CHECK="
-	~CGROUPS
-	~CGROUP_FREEZER
-	~CGROUP_DEVICE
-	~CGROUP_CPUACCT
-	~CGROUP_SCHED
-	~CGROUP_PERF
-	~BLK_CGROUP
-	~NET_CLS_CGROUP
-	~CGROUP_NET_PRIO
-	~CPUSETS
-	~NAMESPACES
-	~UTS_NS
-	~IPC_NS
-	~PID_NS
-	~NET_NS
-	~USER_NS
-	~DEVPTS_MULTIPLE_INSTANCES
-	~VETH
-	~MACVLAN
-	~POSIX_MQUEUE
-	~SECURITYFS
-	~!GRKERNSEC_CHROOT_MOUNT
-	~!GRKERNSEC_CHROOT_DOUBLE
-	~!GRKERNSEC_CHROOT_PIVOT
-	~!GRKERNSEC_CHROOT_CHMOD
-	~!GRKERNSEC_CHROOT_CAPS
-"
-
-VIRTNET_CONFIG_CHECK="
-	~BRIDGE_NF_EBTABLES
-	~BRIDGE_EBT_MARK_T
-	~NETFILTER_ADVANCED
-	~NETFILTER_XT_TARGET_CHECKSUM
-	~NETFILTER_XT_CONNMARK
-	~NETFILTER_XT_MARK
-"
-
-BWLMT_CONFIG_CHECK="
-	~BRIDGE_EBT_T_NAT
-	~NET_SCH_HTB
-	~NET_SCH_SFQ
-	~NET_SCH_INGRESS
-	~NET_CLS_FW
-	~NET_CLS_U32
-	~NET_ACT_POLICE
-"
-
-MACVTAP_CONFIG_CHECK=" ~MACVTAP"
-
-LVM_CONFIG_CHECK=" ~BLK_DEV_DM ~DM_SNAPSHOT ~DM_MULTIPATH"
-
-ERROR_USER_NS="Optional depending on LXC configuration."
+	virtual/pkgconfig"
 
 pkg_setup() {
 	enewgroup qemu 77
@@ -234,18 +130,69 @@ pkg_setup() {
 		gpasswd -a qemu kvm
 	fi
 
-	# Handle specific kernel versions for different features
-	kernel_is lt 3 6 && LXC_CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
-	kernel_is ge 3 6 &&	LXC_CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
-
+	# Check kernel configuration:
 	CONFIG_CHECK=""
-	use fuse && CONFIG_CHECK+=" ~FUSE_FS"
-	use lvm && CONFIG_CHECK+="${LVM_CONFIG_CHECK}"
-	use lxc && CONFIG_CHECK+="${LXC_CONFIG_CHECK}"
-	use macvtap && CONFIG_CHECK+="${MACVTAP_CONFIG_CHECK}"
-	use virt-network && CONFIG_CHECK+="${VIRTNET_CONFIG_CHECK}"
+	use fuse && CONFIG_CHECK+="
+		~FUSE_FS"
+
+	use lvm && CONFIG_CHECK+="
+		~BLK_DEV_DM
+		~DM_MULTIPATH
+		~DM_SNAPSHOT"
+
+	use lxc && CONFIG_CHECK+="
+		~BLK_CGROUP
+		~CGROUP_CPUACCT
+		~CGROUP_DEVICE
+		~CGROUP_FREEZER
+		~CGROUP_NET_PRIO
+		~CGROUP_PERF
+		~CGROUPS
+		~CGROUP_SCHED
+		~CPUSETS
+		~DEVPTS_MULTIPLE_INSTANCES
+		~IPC_NS
+		~MACVLAN
+		~NAMESPACES
+		~NET_CLS_CGROUP
+		~NET_NS
+		~PID_NS
+		~POSIX_MQUEUE
+		~SECURITYFS
+		~USER_NS
+		~UTS_NS
+		~VETH
+		~!GRKERNSEC_CHROOT_MOUNT
+		~!GRKERNSEC_CHROOT_DOUBLE
+		~!GRKERNSEC_CHROOT_PIVOT
+		~!GRKERNSEC_CHROOT_CHMOD
+		~!GRKERNSEC_CHROOT_CAPS"
+	# Handle specific kernel versions for different features
+	kernel_is lt 3 6 && CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
+	kernel_is ge 3 6 && CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
+
+	use macvtap && CONFIG_CHECK+="
+		~MACVTAP"
+
+	use virt-network && CONFIG_CHECK+="
+		~BRIDGE_EBT_MARK_T
+		~BRIDGE_NF_EBTABLES
+		~NETFILTER_ADVANCED
+		~NETFILTER_XT_CONNMARK
+		~NETFILTER_XT_MARK
+		~NETFILTER_XT_TARGET_CHECKSUM"
 	# Bandwidth Limiting Support
-	use virt-network && CONFIG_CHECK+="${BWLMT_CONFIG_CHECK}"
+	use virt-network && CONFIG_CHECK+="
+		~BRIDGE_EBT_T_NAT
+		~NET_ACT_POLICE
+		~NET_CLS_FW
+		~NET_CLS_U32
+		~NET_SCH_HTB
+		~NET_SCH_INGRESS
+		~NET_SCH_SFQ"
+
+	ERROR_USER_NS="Optional depending on LXC configuration."
+
 	if [[ -n ${CONFIG_CHECK} ]]; then
 		linux-info_pkg_setup
 	fi
@@ -270,145 +217,91 @@ src_prepare() {
 		"${FILESDIR}"/${PN}-1.2.16-fix_paths_in_libvirt-guests_sh.patch \
 		"${FILESDIR}"/${PN}-1.2.17-fix_paths_for_apparmor.patch
 
-	[[ -n ${BACKPORTS} ]] && \
+	[[ -n ${BACKPORTS} ]] &&
 		EPATCH_FORCE=yes EPATCH_SUFFIX="patch" \
 			EPATCH_SOURCE="${WORKDIR}/patches" epatch
 
 	epatch_user
 
-	[[ -n ${AUTOTOOLIZE} ]] && eautoreconf
-
-	# Tweak the init script
-	local avahi_init=
-	local iscsi_init=
-	local rbd_init=
-	local firewalld_init=
-	cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init"
-	use avahi && avahi_init='avahi-daemon'
-	use iscsi && iscsi_init='iscsid'
-	use rbd && rbd_init='ceph'
-	use firewalld && firewalld_init='need firewalld'
-
-	sed -e "s/USE_FLAG_FIREWALLD/${firewalld_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_AVAHI/${avahi_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_ISCSI/${iscsi_init}/" -i "${S}/libvirtd.init"
-	sed -e "s/USE_FLAG_RBD/${rbd_init}/" -i "${S}/libvirtd.init"
+	# Tweak the init script:
+	cp "${FILESDIR}/libvirtd.init-r15" "${S}/libvirtd.init" || die
+	sed -e "s/USE_FLAG_FIREWALLD/$(usex firewalld 'need firewalld' '')/" \
+		-e "s/USE_FLAG_AVAHI/$(usex avahi avahi-daemon '')/" \
+		-e "s/USE_FLAG_ISCSI/$(usex iscsi iscsid '')/" \
+		-e "s/USE_FLAG_RBD/$(usex rbd  ceph '')/" \
+		-i "${S}/libvirtd.init" || die "sed failed"
+
+	AUTOTOOLS_AUTORECONF=true
+	autotools-utils_src_prepare
 }
 
 src_configure() {
-	local myconf=""
-
-	## enable/disable daemon, otherwise client only utils
-	myconf+=" $(use_with libvirtd)"
-
-	## enable/disable the daemon using avahi to find VMs
-	myconf+=" $(use_with avahi)"
+	local myeconfargs=(
+		$(use_with apparmor)
+		$(use_with apparmor apparmor-profiles)
+		$(use_with audit)
+		$(use_with avahi)
+		$(use_with caps capng)
+		$(use_with firewalld)
+		$(use_with fuse)
+		$(use_with glusterfs)
+		$(use_with glusterfs storage-gluster)
+		$(use_with iscsi storage-iscsi)
+		$(use_with libvirtd)
+		$(use_with lvm storage-lvm)
+		$(use_with lvm storage-mpath)
+		$(use_with lxc)
+		$(use_with macvtap)
+		$(use_enable nls)
+		$(use_with numa numactl)
+		$(use_with numa numad)
+		$(use_with openvz)
+		$(use_with parted storage-disk)
+		$(use_with pcap libpcap)
+		$(use_with phyp)
+		$(use_with policykit polkit)
+		$(use_with qemu)
+		$(use_with qemu yajl)
+		$(use_with rbd storage-rbd)
+		$(use_with sasl)
+		$(use_with selinux)
+		$(use_with systemd systemd-daemon)
+		$(usex systemd --with-init-script=systemd '')
+		$(use_with udev)
+		$(use_with uml)
+		$(use_with vepa virtualport)
+		$(use_with virt-network network)
+		$(use_with wireshark-plugins wireshark-dissector)
+		$(use_with xen)
+		$(use_with xen xen-inotify)
+		$(usex xen --with-libxl '')
+
+		--without-hal
+		--without-netcf
+		--without-sanlock
+		--without-xenapi
+		--with-esx
+		--with-qemu-group=$(usex caps qemu root)
+		--with-qemu-user=$(usex caps qemu root)
+		--with-remote
+		--with-storage-fs
+		--with-vmware
+
+		--disable-static
+		--disable-werror
+
+		--docdir=/usr/share/doc/${PF}
+		--htmldir=/usr/share/doc/${PF}/html
+		--localstatedir=/var
+	)
 
-	## hypervisors on the local host
-	myconf+=" $(use_with xen) $(use_with xen xen-inotify)"
-	myconf+=" --without-xenapi"
-	if use xen && has_version ">=app-emulation/xen-tools-4.2.0"; then
-		myconf+=" --with-libxl"
-	else
-		myconf+=" --without-libxl"
-	fi
-	myconf+=" $(use_with openvz)"
-	myconf+=" $(use_with lxc)"
 	if use virtualbox && has_version app-emulation/virtualbox-ose; then
-		myconf+=" --with-vbox=/usr/lib/virtualbox-ose/"
-	else
-		myconf+=" $(use_with virtualbox vbox)"
-	fi
-	myconf+=" $(use_with uml)"
-	myconf+=" $(use_with qemu)"
-	myconf+=" $(use_with qemu yajl)" # Use QMP over HMP
-	myconf+=" $(use_with phyp)"
-	myconf+=" --with-esx"
-	myconf+=" --with-vmware"
-
-	## additional host drivers
-	myconf+=" $(use_with apparmor)"
-	myconf+=" $(use_with apparmor apparmor-profiles)"
-	myconf+=" $(use_with virt-network network)"
-	myconf+=" --with-storage-fs"
-	myconf+=" $(use_with lvm storage-lvm)"
-	myconf+=" $(use_with iscsi storage-iscsi)"
-	myconf+=" $(use_with parted storage-disk)"
-	myconf+=" $(use_with glusterfs)"
-	myconf+=" $(use_with glusterfs storage-gluster)"
-	myconf+=" $(use_with lvm storage-mpath)"
-	myconf+=" $(use_with rbd storage-rbd)"
-	myconf+=" $(use_with numa numactl)"
-	myconf+=" $(use_with numa numad)"
-	myconf+=" $(use_with selinux)"
-	myconf+=" $(use_with fuse)"
-
-	# udev for device support details
-	myconf+=" $(use_with udev)"
-	myconf+=" --without-hal"
-
-	# linux capability support so we don't need privileged accounts
-	myconf+=" $(use_with caps capng)"
-
-	## auth stuff
-	myconf+=" $(use_with policykit polkit)"
-	myconf+=" $(use_with sasl)"
-
-	# network bits
-	myconf+=" $(use_with macvtap)"
-	myconf+=" $(use_with pcap libpcap)"
-	myconf+=" $(use_with vepa virtualport)"
-	myconf+=" $(use_with firewalld)"
-
-	## other
-	myconf+=" $(use_enable nls)"
-
-	# user privilege bits fir qemu/kvm
-	if use caps; then
-		myconf+=" --with-qemu-user=qemu"
-		myconf+=" --with-qemu-group=qemu"
+		myeconfargs+=( --with-vbox=/usr/lib/virtualbox-ose/ )
 	else
-		myconf+=" --with-qemu-user=root"
-		myconf+=" --with-qemu-group=root"
+		myeconfargs+=( $(use_with virtualbox vbox) )
 	fi
 
-	# audit support
-	myconf+=" $(use_with audit)"
-
-	# wireshark dissector
-	myconf+=" $(use_with wireshark-plugins wireshark-dissector)"
-
-	## stuff we don't yet support
-	myconf+=" --without-netcf"
-
-	# locking support
-	myconf+=" --without-sanlock"
-
-	# systemd unit files
-	myconf+=" $(use_with systemd systemd-daemon)"
-	use systemd && myconf+=" --with-init-script=systemd"
-
-	# this is a nasty trick to work around the problem in bug
-	# #275073. The reason why we don't solve this properly is that
-	# it'll require us to rebuild autotools (and we don't really want
-	# to do that right now). The proper solution has been sent
-	# upstream and should hopefully land in 0.7.7, in the mean time,
-	# mime the same functionality with this.
-	case ${CHOST} in
-		*cygwin* | *mingw* )
-			;;
-		*)
-			ac_cv_prog_WINDRES=no
-			;;
-	esac
-
-	econf \
-		${myconf} \
-		--disable-static \
-		--disable-werror \
-		--with-remote \
-		--docdir=/usr/share/doc/${PF} \
-		--localstatedir=/var
+	autotools-utils_src_configure
 
 	if [[ ${PV} = *9999* ]]; then
 		# Restore gnulib's config.sub and config.guess
@@ -424,13 +317,9 @@ src_test() {
 }
 
 src_install() {
-	emake install \
+	autotools-utils_src_compile install \
 		DESTDIR="${D}" \
-		HTML_DIR=/usr/share/doc/${PF}/html \
-		DOCS_DIR=/usr/share/doc/${PF} \
-		EXAMPLE_DIR=/usr/share/doc/${PF}/examples \
-		SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)" \
-		|| die "emake install failed"
+		SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)"
 
 	find "${D}" -name '*.la' -delete || die
 
@@ -456,6 +345,8 @@ src_install() {
 	newconfd "${FILESDIR}/libvirtd.confd-r5" libvirtd || die
 	newconfd "${FILESDIR}/libvirt-guests.confd" libvirt-guests || die
 
+	DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+	DISABLE_AUTOFORMATTING=true
 	readme.gentoo_create_doc
 }
 
@@ -464,16 +355,6 @@ pkg_preinst() {
 	if [[ -e "${ROOT}"/etc/libvirt/qemu/networks/default.xml ]]; then
 		rm -rf "${D}"/etc/libvirt/qemu/networks/default.xml
 	fi
-
-	# We really don't want to use or support old PolicyKit cause it
-	# screws with the new polkit integration
-	if has_version sys-auth/policykit; then
-		rm -rf "${D}"/usr/share/PolicyKit/policy/org.libvirt.unix.policy
-	fi
-
-	# Only sysctl files ending in .conf work
-	dodir /etc/sysctl.d
-	mv "${D}"/usr/lib/sysctl.d/libvirtd.conf "${D}"/etc/sysctl.d/libvirtd.conf
 }
 
 pkg_postinst() {
@@ -488,5 +369,7 @@ pkg_postinst() {
 		FORCE_PRINT_ELOG=true
 	fi
 
+	DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
+	DISABLE_AUTOFORMATTING=true
 	readme.gentoo_print_elog
 }