summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile.am2
-rw-r--r--doc/guix.texi43
-rw-r--r--guix/build-system/rebar.scm143
-rw-r--r--guix/build/rebar-build-system.scm147
4 files changed, 335 insertions, 0 deletions
diff --git a/Makefile.am b/Makefile.am
index c1b48d9af0..5a496aeeb3 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -171,6 +171,7 @@ MODULES = \
guix/build-system/waf.scm \
guix/build-system/r.scm \
guix/build-system/rakudo.scm \
+ guix/build-system/rebar.scm \
guix/build-system/ruby.scm \
guix/build-system/scons.scm \
guix/build-system/texlive.scm \
@@ -225,6 +226,7 @@ MODULES = \
guix/build/r-build-system.scm \
guix/build/renpy-build-system.scm \
guix/build/rakudo-build-system.scm \
+ guix/build/rebar-build-system.scm \
guix/build/ruby-build-system.scm \
guix/build/scons-build-system.scm \
guix/build/texlive-build-system.scm \
diff --git a/doc/guix.texi b/doc/guix.texi
index 143bf36403..826e83007f 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -9258,6 +9258,49 @@ with @code{#:zef} or removed by passing @code{#f} to the
@code{with-zef?} parameter.
@end defvr
+@defvr {Scheme Variable} rebar-build-system
+This variable is exported by @code{(guix build-system rebar)}. It
+implements a build procedure around @uref{https://rebar3.org,rebar3},
+a build system for programs written in the Erlang language.
+
+It adds both @code{rebar3} and the @code{erlang} to the set of inputs.
+Different packages can be specified with the @code{#:rebar} and
+@code{#:erlang} parameters, respectively.
+
+This build system is based on @code{gnu-build-system}, but with the
+following phases changed:
+
+@table @code
+
+@item unpack
+This phase, after unpacking the source like the @code{gnu-build-system}
+does, checks for a file @code{contents.tar.gz} at the top-level of the
+source. If this file exists, it will be unpacked, too. This eases
+handling of package hosted at @uref{https://hex.pm/},
+the Erlang and Elixir package repository.
+
+@item bootstrap
+@item configure
+There are no @code{bootstrap} and @code{configure} phase because erlang
+packages typically don’t need to be configured.
+
+@item build
+This phase runs @code{rebar3 compile}
+with the flags listed in @code{#:rebar-flags}.
+
+@item check
+Unless @code{#:tests? #f} is passed,
+this phase runs @code{rebar3 eunit},
+or some other target specified with @code{#:test-target},
+with the flags listed in @code{#:rebar-flags},
+
+@item install
+This installs the files created in the @i{default} profile, or some
+other profile specified with @code{#:install-profile}.
+
+@end table
+@end defvr
+
@defvr {Scheme Variable} texlive-build-system
This variable is exported by @code{(guix build-system texlive)}. It is
used to build TeX packages in batch mode with a specified engine. The
diff --git a/guix/build-system/rebar.scm b/guix/build-system/rebar.scm
new file mode 100644
index 0000000000..8a8fb7708c
--- /dev/null
+++ b/guix/build-system/rebar.scm
@@ -0,0 +1,143 @@
+;;; GNU Guix --- Functional package management for GNU
+;;; Copyright © 2016 Ricardo Wurmus <rekado@elephly.net>
+;;; Copyright © 2020 Hartmut Goebel <h.goebel@crazy-compilers.com>
+;;;
+;;; This file is part of GNU Guix.
+;;;
+;;; GNU Guix is free software; you can redistribute it and/or modify it
+;;; under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3 of the License, or (at
+;;; your option) any later version.
+;;;
+;;; GNU Guix is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;;; GNU General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>.
+
+(define-module (guix build-system rebar)
+ #:use-module (guix store)
+ #:use-module (guix utils)
+ #:use-module (guix gexp)
+ #:use-module (guix packages)
+ #:use-module (guix monads)
+ #:use-module (guix search-paths)
+ #:use-module (guix build-system)
+ #:use-module (guix build-system gnu)
+ #:use-module ((guix hexpm-download) #:select (hexpm-uri) #:prefix dl:)
+ #:use-module (ice-9 match)
+ #:use-module (srfi srfi-26)
+ #:export (hexpm-uri
+ %rebar-build-system-modules
+ rebar-build
+ rebar-build-system))
+
+;;
+;; Standard build procedure for Erlang packages using Rebar.
+;;
+
+(define hexpm-uri dl:hexpm-uri)
+
+(define %rebar-build-system-modules
+ ;; Build-side modules imported by default.
+ `((guix build rebar-build-system)
+ ,@%gnu-build-system-modules))
+
+(define (default-rebar3)
+ "Return the default Rebar3 package."
+ ;; Lazily resolve the binding to avoid a circular dependency.
+ (let ((erlang-mod (resolve-interface '(gnu packages erlang))))
+ (module-ref erlang-mod 'rebar3)))
+
+(define (default-erlang)
+ "Return the default Erlang package."
+ ;; Lazily resolve the binding to avoid a circular dependency.
+ (let ((erlang-mod (resolve-interface '(gnu packages erlang))))
+ (module-ref erlang-mod 'erlang)))
+
+(define* (lower name
+ #:key source inputs native-inputs outputs system target
+ (rebar (default-rebar3))
+ (erlang (default-erlang))
+ #:allow-other-keys
+ #:rest arguments)
+ "Return a bag for NAME from the given arguments."
+ (define private-keywords
+ '(#:target #:rebar #:erlang #:inputs #:native-inputs))
+
+ (and (not target) ;XXX: no cross-compilation
+ (bag
+ (name name)
+ (system system)
+ (host-inputs `(,@(if source
+ `(("source" ,source))
+ '())
+ ,@inputs))
+ (build-inputs `(("rebar" ,rebar)
+ ("erlang" ,erlang) ;; for escriptize
+ ,@native-inputs
+ ;; Keep the standard inputs of 'gnu-build-system'.
+ ,@(standard-packages)))
+ (outputs outputs)
+ (build rebar-build)
+ (arguments (strip-keyword-arguments private-keywords arguments)))))
+
+(define* (rebar-build name inputs
+ #:key
+ guile source
+ (rebar-flags ''("skip_deps=true" "-vv"))
+ (tests? #t)
+ (test-target "eunit")
+ ;; TODO: install-name ; default: based on guix package name
+ (install-profile "default")
+ (phases '(@ (guix build rebar-build-system)
+ %standard-phases))
+ (outputs '("out"))
+ (search-paths '())
+ (native-search-paths '())
+ (system (%current-system))
+ (imported-modules %rebar-build-system-modules)
+ (modules '((guix build rebar-build-system)
+ (guix build utils))))
+ "Build SOURCE with INPUTS."
+
+ (define builder
+ (with-imported-modules imported-modules
+ #~(begin
+ (use-modules #$@(sexp->gexp modules))
+
+ #$(with-build-variables inputs outputs
+ #~(rebar-build #:source #+source
+ #:system #$system
+ #:name #$name
+ #:rebar-flags #$rebar-flags
+ #:tests? #$tests?
+ #:test-target #$test-target
+ ;; TODO: #:install-name #$install-name
+ #:install-profile #$install-profile
+ #:phases #$(if (pair? phases)
+ (sexp->gexp phases)
+ phases)
+ #:outputs %outputs
+ #:search-paths '#$(sexp->gexp
+ (map search-path-specification->sexp
+ search-paths))
+ #:inputs %build-inputs)))))
+
+ (mlet %store-monad ((guile (package->derivation (or guile (default-guile))
+ system #:graft? #f)))
+ ;; Note: Always pass #:graft? #f. Without it, ALLOWED-REFERENCES &
+ ;; co. would be interpreted as referring to grafted packages.
+ (gexp->derivation name builder
+ #:system system
+ #:target #f
+ #:graft? #f
+ #:guile-for-build guile)))
+
+(define rebar-build-system
+ (build-system
+ (name 'rebar)
+ (description "The standard Rebar build system")
+ (lower lower)))
diff --git a/guix/build/rebar-build-system.scm b/guix/build/rebar-build-system.scm
new file mode 100644
index 0000000000..fb66422877
--- /dev/null
+++ b/guix/build/rebar-build-system.scm
@@ -0,0 +1,147 @@
+;;; GNU Guix --- Functional package management for GNU
+;;; Copyright © 2016, 2018 Ricardo Wurmus <rekado@elephly.net>
+;;; Copyright © 2019 Björn Höfling <bjoern.hoefling@bjoernhoefling.de>
+;;; Copyright © 2020, 2022 Hartmut Goebel <h.goebel@crazy-compilers.com>
+;;;
+;;; This file is part of GNU Guix.
+;;;
+;;; GNU Guix is free software; you can redistribute it and/or modify it
+;;; under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3 of the License, or (at
+;;; your option) any later version.
+;;;
+;;; GNU Guix is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;;; GNU General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>.
+
+(define-module (guix build rebar-build-system)
+ #:use-module ((guix build gnu-build-system) #:prefix gnu:)
+ #:use-module ((guix build utils) #:hide (delete))
+ #:use-module (ice-9 match)
+ #:use-module (ice-9 ftw)
+ #:use-module (srfi srfi-1)
+ #:use-module (srfi srfi-26)
+ #:export (rebar-build
+ %standard-phases))
+
+;;
+;; Builder-side code of the standard build procedure for Erlang packages using
+;; rebar3.
+;;
+;; TODO: Think about whether bindir ("ebin"), libdir ("priv") and includedir
+;; "(include") need to be configurable
+
+(define %erlang-libdir "/lib/erlang/lib")
+
+(define* (erlang-depends #:key inputs #:allow-other-keys)
+ (define input-directories
+ (match inputs
+ (((_ . dir) ...)
+ dir)))
+ (mkdir-p "_checkouts")
+
+ (for-each
+ (lambda (input-dir)
+ (let ((elibdir (string-append input-dir %erlang-libdir)))
+ (when (directory-exists? elibdir)
+ (for-each
+ (lambda (dirname)
+ (let ((dest (string-append elibdir "/" dirname))
+ (link (string-append "_checkouts/" dirname)))
+ (when (not (file-exists? link))
+ ;; RETHINK: Maybe better copy and make writable to avoid some
+ ;; error messages e.g. when using with rebar3-git-vsn.
+ (symlink dest link))))
+ (list-directories elibdir)))))
+ input-directories))
+
+(define* (unpack #:key source #:allow-other-keys)
+ "Unpack SOURCE in the working directory, and change directory within the
+source. When SOURCE is a directory, copy it in a sub-directory of the current
+working directory."
+ (let ((gnu-unpack (assoc-ref gnu:%standard-phases 'unpack)))
+ (gnu-unpack #:source source)
+ ;; Packages from hex.pm typically have a contents.tar.gz containing the
+ ;; actual source. If this tar file exists, extract it.
+ (when (file-exists? "contents.tar.gz")
+ (invoke "tar" "xvf" "contents.tar.gz"))))
+
+(define* (build #:key (rebar-flags '()) #:allow-other-keys)
+ (apply invoke `("rebar3" "compile" ,@rebar-flags)))
+
+(define* (check #:key target (rebar-flags '()) (tests? (not target))
+ (test-target "eunit")
+ #:allow-other-keys)
+ (if tests?
+ (apply invoke `("rebar3" ,test-target ,@rebar-flags))
+ (format #t "test suite not run~%")))
+
+(define (erlang-package? name)
+ "Check if NAME correspond to the name of an Erlang package."
+ (string-prefix? "erlang-" name))
+
+(define (package-name-version->erlang-name name+ver)
+ "Convert the Guix package NAME-VER to the corresponding Erlang name-version
+format. Essentially drop the prefix used in Guix and replace dashes by
+underscores."
+ (let* ((name- (package-name->name+version name+ver)))
+ (string-join
+ (string-split
+ (if (erlang-package? name-) ; checks for "erlang-" prefix
+ (string-drop name- (string-length "erlang-"))
+ name-)
+ #\-)
+ "_")))
+
+(define (list-directories directory)
+ "Return file names of the sub-directory of DIRECTORY."
+ (scandir directory
+ (lambda (file)
+ (and (not (member file '("." "..")))
+ (file-is-directory? (string-append directory "/" file))))))
+
+(define* (install #:key name outputs
+ (install-name (package-name-version->erlang-name name))
+ (install-profile "default") ; build profile outputs to install
+ #:allow-other-keys)
+ (let* ((out (assoc-ref outputs "out"))
+ (pkg-dir (string-append out %erlang-libdir "/" install-name)))
+ (let ((bin-dir (string-append "_build/" install-profile "/bin"))
+ (lib-dir (string-append "_build/" install-profile "/lib")))
+ ;; install _build/PROFILE/bin
+ (when (file-exists? bin-dir)
+ (copy-recursively bin-dir out #:follow-symlinks? #t))
+ ;; install _build/PROFILE/lib/*/{ebin,include,priv}
+ (for-each
+ (lambda (*)
+ (for-each
+ (lambda (dirname)
+ (let ((src-dir (string-append lib-dir "/" * "/" dirname))
+ (dst-dir (string-append pkg-dir "/" dirname)))
+ (when (file-exists? src-dir)
+ (copy-recursively src-dir dst-dir #:follow-symlinks? #t))
+ (false-if-exception
+ (delete-file (string-append dst-dir "/.gitignore")))))
+ '("ebin" "include" "priv")))
+ (list-directories lib-dir))
+ (false-if-exception
+ (delete-file (string-append pkg-dir "/priv/Run-eunit-loop.expect"))))))
+
+(define %standard-phases
+ (modify-phases gnu:%standard-phases
+ (replace 'unpack unpack)
+ (delete 'bootstrap)
+ (delete 'configure)
+ (add-before 'build 'erlang-depends erlang-depends)
+ (replace 'build build)
+ (replace 'check check)
+ (replace 'install install)))
+
+(define* (rebar-build #:key inputs (phases %standard-phases)
+ #:allow-other-keys #:rest args)
+ "Build the given Erlang package, applying all of PHASES in order."
+ (apply gnu:gnu-build #:inputs inputs #:phases phases args))