hwmon: (adm1275) Add support for ADM1293 and ADM1294

ADM1293 and ADM1294 are mostly compatible with other chips of the same
series, but have more configuration options. There are also some
differences in register details.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

3 files changed, 158 insertions, 27 deletions

diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index 15b4a20d5062..d697229e3c18 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -14,6 +14,10 @@ Supported chips:
     Prefix: 'adm1276'
     Addresses scanned: -
     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
+  * Analog Devices ADM1293/ADM1294
+    Prefix: 'adm1293', 'adm1294'
+    Addresses scanned: -
+    Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
 
 Author: Guenter Roeck <linux@roeck-us.net>
 
@@ -22,12 +26,12 @@ Description
 -----------
 
 This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
-and ADM1276 Hot-Swap Controller and Digital Power Monitor.
+ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
 
-ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
-board to be removed from or inserted into a live backplane. They also feature
-current and voltage readback via an integrated 12-bit analog-to-digital
-converter (ADC), accessed using a PMBus interface.
+ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
+allow a circuit board to be removed from or inserted into a live backplane.
+They also feature current and voltage readback via an integrated 12
+bit analog-to-digital converter (ADC), accessed using a PMBus interface.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -58,16 +62,16 @@ Sysfs entries
 The following attributes are supported. Limits are read-write, history reset
 attributes are write-only, all other attributes are read-only.
 
-in1_label		"vin1" or "vout1" depending on chip variant and
-			configuration. On ADM1075, vout1 reports the voltage on
-			the VAUX pin.
-in1_input		Measured voltage.
-in1_min			Minimum Voltage.
-in1_max			Maximum voltage.
-in1_min_alarm		Voltage low alarm.
-in1_max_alarm		Voltage high alarm.
-in1_highest		Historical maximum voltage.
-in1_reset_history	Write any value to reset history.
+inX_label		"vin1" or "vout1" depending on chip variant and
+			configuration. On ADM1075, ADM1293, and ADM1294,
+			vout1 reports the voltage on the VAUX pin.
+inX_input		Measured voltage.
+inX_min			Minimum Voltage.
+inX_max			Maximum voltage.
+inX_min_alarm		Voltage low alarm.
+inX_max_alarm		Voltage high alarm.
+inX_highest		Historical maximum voltage.
+inX_reset_history	Write any value to reset history.
 
 curr1_label		"iout1"
 curr1_input		Measured current.
@@ -86,7 +90,9 @@ curr1_reset_history	Write any value to reset history.
 
 power1_label		"pin1"
 power1_input		Input power.
+power1_input_lowest	Lowest observed input power. ADM1293 and ADM1294 only.
+power1_input_highest	Highest observed input power.
 power1_reset_history	Write any value to reset history.
 
-			Power attributes are supported on ADM1075 and ADM1276
-			only.
+			Power attributes are supported on ADM1075, ADM1276,
+			ADM1293, and ADM1294.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 9f7dbd189c97..67901cb08f77 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -30,8 +30,8 @@ config SENSORS_ADM1275
 	default n
 	help
 	  If you say yes here you get hardware monitoring support for Analog
-	  Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
-	  Power Monitors.
+	  Devices ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 Hot-Swap
+	  Controller and Digital Power Monitors.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called adm1275.
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 1c19a2ee415c..188af4c89f40 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -24,7 +24,11 @@
 #include <linux/bitops.h>
 #include "pmbus.h"
 
-enum chips { adm1075, adm1275, adm1276 };
+enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
+
+#define ADM1275_MFR_STATUS_IOUT_WARN2	BIT(0)
+#define ADM1293_MFR_STATUS_VAUX_UV_WARN	BIT(5)
+#define ADM1293_MFR_STATUS_VAUX_OV_WARN	BIT(6)
 
 #define ADM1275_PEAK_IOUT		0xd0
 #define ADM1275_PEAK_VIN		0xd1
@@ -37,18 +41,30 @@ enum chips { adm1075, adm1275, adm1276 };
 #define ADM1075_IRANGE_25		BIT(3)
 #define ADM1075_IRANGE_MASK		(BIT(3) | BIT(4))
 
+#define ADM1293_IRANGE_25		0
+#define ADM1293_IRANGE_50		BIT(6)
+#define ADM1293_IRANGE_100		BIT(7)
+#define ADM1293_IRANGE_200		(BIT(6) | BIT(7))
+#define ADM1293_IRANGE_MASK		(BIT(6) | BIT(7))
+
+#define ADM1293_VIN_SEL_012		BIT(2)
+#define ADM1293_VIN_SEL_074		BIT(3)
+#define ADM1293_VIN_SEL_210		(BIT(2) | BIT(3))
+#define ADM1293_VIN_SEL_MASK		(BIT(2) | BIT(3))
+
+#define ADM1293_VAUX_EN			BIT(1)
+
 #define ADM1275_IOUT_WARN2_LIMIT	0xd7
 #define ADM1275_DEVICE_CONFIG		0xd8
 
 #define ADM1275_IOUT_WARN2_SELECT	BIT(4)
 
 #define ADM1276_PEAK_PIN		0xda
-
-#define ADM1275_MFR_STATUS_IOUT_WARN2	BIT(0)
-
 #define ADM1075_READ_VAUX		0xdd
 #define ADM1075_VAUX_OV_WARN_LIMIT	0xde
 #define ADM1075_VAUX_UV_WARN_LIMIT	0xdf
+#define ADM1293_IOUT_MIN		0xe3
+#define ADM1293_PIN_MIN			0xe4
 #define ADM1075_VAUX_STATUS		0xf6
 
 #define ADM1075_VAUX_OV_WARN		BIT(7)
@@ -60,6 +76,9 @@ struct adm1275_data {
 	bool have_uc_fault;
 	bool have_vout;
 	bool have_vaux_status;
+	bool have_mfr_vaux_status;
+	bool have_iout_min;
+	bool have_pin_min;
 	bool have_pin_max;
 	struct pmbus_driver_info info;
 };
@@ -94,6 +113,28 @@ static const struct coefficients adm1276_coefficients[] = {
 	[4] = { 2115, 0, -1 },		/* power, vrange not set */
 };
 
+static const struct coefficients adm1293_coefficients[] = {
+	[0] = { 3333, -1, 0 },		/* voltage, vrange 1.2V */
+	[1] = { 5552, -5, -1 },		/* voltage, vrange 7.4V */
+	[2] = { 19604, -50, -2 },	/* voltage, vrange 21V */
+	[3] = { 8000, -100, -2 },	/* current, irange25 */
+	[4] = { 4000, -100, -2 },	/* current, irange50 */
+	[5] = { 20000, -1000, -3 },	/* current, irange100 */
+	[6] = { 10000, -1000, -3 },	/* current, irange200 */
+	[7] = { 10417, 0, -1 },		/* power, 1.2V, irange25 */
+	[8] = { 5208, 0, -1 },		/* power, 1.2V, irange50 */
+	[9] = { 26042, 0, -2 },		/* power, 1.2V, irange100 */
+	[10] = { 13021, 0, -2 },	/* power, 1.2V, irange200 */
+	[11] = { 17351, 0, -2 },	/* power, 7.4V, irange25 */
+	[12] = { 8676, 0, -2 },		/* power, 7.4V, irange50 */
+	[13] = { 4338, 0, -2 },		/* power, 7.4V, irange100 */
+	[14] = { 21689, 0, -3 },	/* power, 7.4V, irange200 */
+	[15] = { 6126, 0, -2 },		/* power, 21V, irange25 */
+	[16] = { 30631, 0, -3 },	/* power, 21V, irange50 */
+	[17] = { 15316, 0, -3 },	/* power, 21V, irange100 */
+	[18] = { 7658, 0, -3 },		/* power, 21V, irange200 */
+};
+
 static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
@@ -131,6 +172,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 			return -ENODATA;
 		ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
 		break;
+	case PMBUS_VIRT_READ_IOUT_MIN:
+		if (!data->have_iout_min)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN);
+		break;
 	case PMBUS_VIRT_READ_IOUT_MAX:
 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
 		break;
@@ -140,6 +186,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 	case PMBUS_VIRT_READ_VIN_MAX:
 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
 		break;
+	case PMBUS_VIRT_READ_PIN_MIN:
+		if (!data->have_pin_min)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN);
+		break;
 	case PMBUS_VIRT_READ_PIN_MAX:
 		if (!data->have_pin_max)
 			return -ENXIO;
@@ -163,6 +214,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 				   u16 word)
 {
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct adm1275_data *data = to_adm1275_data(info);
 	int ret;
 
 	if (page)
@@ -176,6 +229,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 		break;
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
+		if (!ret && data->have_iout_min)
+			ret = pmbus_write_word_data(client, 0,
+						    ADM1293_IOUT_MIN, 0);
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0);
@@ -185,6 +241,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 		break;
 	case PMBUS_VIRT_RESET_PIN_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
+		if (!ret && data->have_pin_min)
+			ret = pmbus_write_word_data(client, 0,
+						    ADM1293_PIN_MIN, 0);
 		break;
 	default:
 		ret = -ENODATA;
@@ -231,6 +290,15 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
 				ret |= PB_VOLTAGE_OV_WARNING;
 			if (mfr_status & ADM1075_VAUX_UV_WARN)
 				ret |= PB_VOLTAGE_UV_WARNING;
+		} else if (data->have_mfr_vaux_status) {
+			mfr_status = pmbus_read_byte_data(client, page,
+						PMBUS_STATUS_MFR_SPECIFIC);
+			if (mfr_status < 0)
+				return mfr_status;
+			if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN)
+				ret |= PB_VOLTAGE_OV_WARNING;
+			if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN)
+				ret |= PB_VOLTAGE_UV_WARNING;
 		}
 		break;
 	default:
@@ -244,6 +312,8 @@ static const struct i2c_device_id adm1275_id[] = {
 	{ "adm1075", adm1075 },
 	{ "adm1275", adm1275 },
 	{ "adm1276", adm1276 },
+	{ "adm1293", adm1293 },
+	{ "adm1294", adm1294 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adm1275_id);
@@ -258,7 +328,7 @@ static int adm1275_probe(struct i2c_client *client,
 	struct adm1275_data *data;
 	const struct i2c_device_id *mid;
 	const struct coefficients *coefficients;
-	int vindex = -1, cindex = -1, pindex = -1;
+	int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
 
 	if (!i2c_check_functionality(client->adapter,
 				     I2C_FUNC_SMBUS_READ_BYTE_DATA
@@ -390,17 +460,72 @@ static int adm1275_probe(struct i2c_client *client,
 			info->func[0] |=
 			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 		break;
+	case adm1293:
+	case adm1294:
+		data->have_iout_min = true;
+		data->have_pin_min = true;
+		data->have_pin_max = true;
+		data->have_mfr_vaux_status = true;
+
+		coefficients = adm1293_coefficients;
+
+		voindex = 0;
+		switch (config & ADM1293_VIN_SEL_MASK) {
+		case ADM1293_VIN_SEL_012:	/* 1.2V */
+			vindex = 0;
+			break;
+		case ADM1293_VIN_SEL_074:	/* 7.4V */
+			vindex = 1;
+			break;
+		case ADM1293_VIN_SEL_210:	/* 21V */
+			vindex = 2;
+			break;
+		default:			/* disabled */
+			break;
+		}
+
+		switch (config & ADM1293_IRANGE_MASK) {
+		case ADM1293_IRANGE_25:
+			cindex = 3;
+			break;
+		case ADM1293_IRANGE_50:
+			cindex = 4;
+			break;
+		case ADM1293_IRANGE_100:
+			cindex = 5;
+			break;
+		case ADM1293_IRANGE_200:
+			cindex = 6;
+			break;
+		}
+
+		if (vindex >= 0)
+			pindex = 7 + vindex * 4 + (cindex - 3);
+
+		if (config & ADM1293_VAUX_EN)
+			info->func[0] |=
+				PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+		info->func[0] |= PMBUS_HAVE_PIN |
+			PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+
+		break;
 	default:
 		dev_err(&client->dev, "Unsupported device\n");
 		return -ENODEV;
 	}
+
+	if (voindex < 0)
+		voindex = vindex;
 	if (vindex >= 0) {
 		info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m;
 		info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b;
 		info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R;
-		info->m[PSC_VOLTAGE_OUT] = coefficients[vindex].m;
-		info->b[PSC_VOLTAGE_OUT] = coefficients[vindex].b;
-		info->R[PSC_VOLTAGE_OUT] = coefficients[vindex].R;
+	}
+	if (voindex >= 0) {
+		info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m;
+		info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b;
+		info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R;
 	}
 	if (cindex >= 0) {
 		info->m[PSC_CURRENT_OUT] = coefficients[cindex].m;