Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 281 insertions, 0 deletions

diff --git a/Documentation/isdn/README.sc b/Documentation/isdn/README.sc
new file mode 100644
index 000000000000..1153cd926059
--- /dev/null
+++ b/Documentation/isdn/README.sc
@@ -0,0 +1,281 @@
+Welcome to Beta Release 2 of the combination ISDN driver for SpellCaster's
+ISA ISDN adapters. Please note this release 2 includes support for the
+DataCommute/BRI and TeleCommute/BRI adapters only and any other use is 
+guaranteed to fail. If you have a DataCommute/PRI installed in the test
+computer, we recommend removing it as it will be detected but will not
+be usable.  To see what we have done to Beta Release 2, see section 3.
+
+Speaking of guarantees, THIS IS BETA SOFTWARE and as such contains
+bugs and defects either known or unknown. Use this software at your own
+risk. There is NO SUPPORT for this software. Some help may be available
+through the web site or the mailing list but such support is totally at
+our own option and without warranty. If you choose to assume all and
+total risk by using this driver, we encourage you to join the beta
+mailing list.
+
+To join the Linux beta mailing list, send a message to:
+majordomo@spellcast.com with the words "subscribe linux-beta" as the only
+contents of the message. Do not include a signature. If you choose to
+remove yourself from this list at a later date, send another message to
+the same address with the words "unsubscribe linux-beta" as its only
+contents.
+
+TABLE OF CONTENTS
+-----------------
+	1. Introduction
+	 1.1 What is ISDN4Linux?
+	 1.2 What is different between this driver and previous drivers?
+	 1.3 How do I setup my system with the correct software to use
+	     this driver release?
+	
+	2. Basic Operations
+	 2.1 Unpacking and installing the driver
+	 2.2 Read the man pages!!!
+	 2.3 Installing the driver
+	 2.4 Removing the driver
+	 2.5 What to do if it doesn't load
+	 2.6 How to setup ISDN4Linux with the driver
+
+	3. Beta Change Summaries and Miscellaneous Notes
+
+1. Introduction
+---------------
+
+The revision 2 Linux driver for SpellCaster ISA ISDN adapters is built
+upon ISDN4Linux available separately or as included in Linux 2.0 and later.
+The driver will support a maximum of 4 adapters in any one system of any
+type including DataCommute/BRI, DataCommute/PRI and TeleCommute/BRI for a
+maximum of 92 channels for host. The driver is supplied as a module in
+source form and needs to be complied before it can be used. It has been
+tested on Linux 2.0.20.
+
+1.1 What Is ISDN4Linux
+
+ISDN4Linux is a driver and set of tools used to access and use ISDN devices
+on a Linux platform in a common and standard way. It supports HDLC and PPP
+protocols and offers channel bundling and MLPPP support. To use ISDN4Linux
+you need to configure your kernel for ISDN support and get the ISDN4Linux
+tool kit from our web site.
+
+ISDN4Linux creates a channel pool from all of the available ISDN channels
+and therefore can function across adapters. When an ISDN4Linux compliant
+driver (such as ours) is loaded, all of the channels go into a pool and
+are used on a first-come first-served basis. In addition, individual
+channels can be specifically bound to particular interfaces.
+
+1.2 What is different between this driver and previous drivers?
+
+The revision 2 driver besides adopting the ISDN4Linux architecture has many
+subtle and not so subtle functional differences from previous releases. These
+include:
+	- More efficient shared memory management combined with a simpler
+	  configuration. All adapters now use only 16Kbytes of shared RAM
+	  versus between 16K and 64K. New methods for using the shared RAM
+	  allow us to utilize all of the available RAM on the adapter through
+	  only one 16K page.
+	- Better detection of available upper memory. The probing routines
+	  have been improved to better detect available shared RAM pages and
+	  used pages are now locked.
+	- Decreased loading time and a wider range of I/O ports probed.
+	  We have significantly reduced the amount of time it takes to load
+	  the driver and at the same time doubled the number of I/O ports
+	  probed increasing the likelihood of finding an adapter.
+	- We now support all ISA adapter models with a single driver instead
+	  of separate drivers for each model. The revision 2 driver supports
+	  the DataCommute/BRI, DataCommute/PRI and TeleCommute/BRI in any
+	  combination up to a maximum of four adapters per system.
+	- On board PPP protocol support has been removed in favour of the
+	  sync-PPP support used in ISDN4Linux. This means more control of
+	  the protocol parameters, faster negotiation time and a more
+	  familiar interface.
+
+1.3 How do I setup my system with the correct software to use
+    this driver release?
+
+Before you can compile, install and use the SpellCaster ISA ISDN driver, you
+must ensure that the following software is installed, configured and running:
+
+	- Linux kernel 2.0.20 or later with the required init and ps
+	  versions. Please see your distribution vendor for the correct
+	  utility packages. The latest kernel is available from
+	  ftp://sunsite.unc.edu/pub/Linux/kernel/v2.0/
+
+	- The latest modules package (modules-2.0.0.tar.gz) from
+	  ftp://sunsite.unc.edu/pub/Linux/kernel/modules-2.0.0.tar.gz
+
+	- The ISDN4Linux tools available from 
+	  ftp://ftp.franken.de/pub/isdn4linux/v2.0/isdn4k-utils-2.0.tar.gz
+	  This package may fail to compile for you so you can alternatively
+	  get a pre-compiled version from
+	  ftp://ftp.spellcast.com/pub/drivers/isdn4linux/isdn4k-bin-2.0.tar.gz
+
+
+2. Basic Operations
+-------------------
+
+2.1 Unpacking and installing the driver
+
+	1. As root, create a directory in a convenient place. We suggest
+	   /usr/src/spellcaster.
+	
+	2. Unpack the archive with :
+		tar xzf sc-n.nn.tar.gz -C /usr/src/spellcaster
+	
+	3. Change directory to /usr/src/spellcaster
+
+	4. Read the README and RELNOTES files.
+
+	5. Run 'make' and if all goes well, run 'make install'.
+
+2.2 Read the man pages!!!
+
+Make sure you read the scctrl(8) and sc(4) manual pages before continuing
+any further. Type 'man 8 scctrl' and 'man 4 sc'.
+
+2.3 Installing the driver
+
+To install the driver, type '/sbin/insmod sc' as root. sc(4) details options
+you can specify but you shouldn't need to use any unless this doesn't work.
+
+Make sure the driver loaded and detected all of the adapters by typing
+'dmesg'.
+
+The driver can be configured so that it is loaded upon startup.  To do this, 
+edit the file "/etc/modules/'uname -f'/'uname -v'" and insert the driver name
+"sc" into this file.
+
+2.4 Removing the driver
+
+To remove the driver, delete any interfaces that may exist (see isdnctrl(8)
+for more on this) and then type '/sbin/rmmod sc'.
+
+2.5 What to do if it doesn't load
+
+If, when you try to install the driver, you get a message mentioning
+'register_isdn' then you do not have the ISDN4Linux system installed. Please
+make sure that ISDN support is configured in the kernel.
+
+If you get a message that says 'initialization of sc failed', then the
+driver failed to detect an adapter or failed to find resources needed such
+as a free IRQ line or shared memory segment. If you are sure there are free
+resources available, use the insmod options detailed in sc(4) to override
+the probing function.  
+
+Upon testing, the following problem was noted, the driver would load without
+problems, but the board would not respond beyond that point.  When a check was 
+done with 'cat /proc/interrupts' the interrupt count for sc was 0.  In the event 
+of this problem, change the BIOS settings so that the interrupts in question are
+reserved for ISA use only.   
+
+
+2.6 How to setup ISDN4Linux with the driver
+
+There are three main configurations which you can use with the driver:
+
+A)	Basic HDLC connection
+B)	PPP connection
+C)	MLPPP connection
+
+It should be mentioned here that you may also use a tty connection if you
+desire. The Documentation directory of the isdn4linux subsystem offers good
+documentation on this feature.
+
+A) 10 steps to the establishment of a basic HDLC connection
+-----------------------------------------------------------
+
+- please open the isdn-hdlc file in the examples directory and follow along...
+	
+	This file is a script used to configure a BRI ISDN TA to establish a 
+	basic HDLC connection between its two channels.  Two network 
+	interfaces are created and two routes added between the channels.
+
+	i)   using the isdnctrl utility, add an interface with "addif" and 
+	     name it "isdn0"
+	ii)  add the outgoing and inbound telephone numbers
+	iii) set the Layer 2 protocol to hdlc
+	iv)  set the eaz of the interface to be the phone number of that 
+	     specific channel
+	v)   to turn the callback features off, set the callback to "off" and
+	     the callback delay (cbdelay) to 0.
+	vi)  the hangup timeout can be set to a specified number of seconds
+	vii) the hangup upon incoming call can be set on or off 
+	viii) use the ifconfig command to bring up the network interface with 
+	      a specific IP address and point to point address
+	ix)  add a route to the IP address through the isdn0 interface
+	x)   a ping should result in the establishment of the connection
+
+	
+B) Establishment of a PPP connection
+------------------------------------
+
+- please open the isdn-ppp file in the examples directory and follow along...
+	
+	This file is a script used to configure a BRI ISDN TA to establish a 
+	PPP connection 	between the two channels.  The file is almost 
+	identical to the HDLC connection example except that the packet 
+	encapsulation type has to be set.
+	
+	use the same procedure as in the HDLC connection from steps i) to 
+	iii) then, after the Layer 2 protocol is set, set the encapsulation 
+	"encap" to syncppp. With this done, the rest of the steps, iv) to x) 
+	can be followed from above.
+
+	Then, the ipppd (ippp daemon) must be setup:
+	
+	xi)   use the ipppd function found in /sbin/ipppd to set the following:
+	xii)  take out (minus) VJ compression and bsd compression
+	xiii) set the mru size to 2000
+	xiv)  link the two /dev interfaces to the daemon
+
+NOTE:  A "*" in the inbound telephone number specifies that a call can be 
+accepted on any number.
+
+C) Establishment of a MLPPP connection
+--------------------------------------
+
+- please open the isdn-mppp file in the examples directory and follow along...
+	
+	This file is a script used to configure a BRI ISDN TA to accept a 
+	Multi Link PPP connection. 
+	
+	i)   using the isdnctrl utility, add an interface with "addif" and 
+	     name it "ippp0"
+	ii)  add the inbound telephone number
+	iii) set the Layer 2 protocol to hdlc and the Layer 3 protocol to 
+	     trans (transparent)
+	iv)  set the packet encapsulation to syncppp
+	v)   set the eaz of the interface to be the phone number of that 
+	     specific channel
+	vi)  to turn the callback features off, set the callback to "off" and
+	     the callback delay (cbdelay) to 0.
+	vi)  the hangup timeout can be set to a specified number of seconds
+	vii) the hangup upon incoming call can be set on or off 
+	viii) add a slave interface and name it "ippp32" for example
+	ix)  set the similar parameters for the ippp32 interface
+	x)   use the ifconfig command to bring-up the ippp0 interface with a 
+	     specific IP address and point to point address
+	xi)  add a route to the IP address through the ippp0 interface
+	xii) use the ipppd function found in /sbin/ipppd to set the following:
+	xiii) take out (minus) bsd compression
+	xiv) set the mru size to 2000
+	xv)  add (+) the multi-link function "+mp"
+	xvi)  link the two /dev interfaces to the daemon
+
+NOTE:  To use the MLPPP connection to dial OUT to a MLPPP connection, change 
+the inbound telephone numbers to the outgoing telephone numbers of the MLPPP 
+host.
+
+	
+3. Beta Change Summaries and Miscellaneous Notes
+------------------------------------------------
+When using the "scctrl" utility to upload firmware revisions on the board,
+please note that the byte count displayed at the end of the operation may be
+different from the total number of bytes in the "dcbfwn.nn.sr" file. Please
+disregard the displayed byte count.
+
+It was noted that in Beta Release 1, the module would fail to load and result
+in a segmentation fault when 'insmod'ed. This problem was created when one of
+the isdn4linux parameters, (isdn_ctrl, data field) was filled in. In some
+cases, this data field was NULL, and was left unchecked, so when it was
+referenced... segv. The bug has been fixed around line 63-68 of event.c.
+