mtd: nand: move raw NAND related code to the raw/ subdir

As part of the process of sharing more code between different NAND
based devices, we need to move all raw NAND related code to the raw/
subdirectory.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

1 files changed, 0 insertions, 1966 deletions

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
deleted file mode 100644
index 87b5ee66e501..000000000000
--- a/drivers/mtd/nand/mxc_nand.c
+++ /dev/null
@@ -1,1966 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/completion.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-
-#include <asm/mach/flash.h>
-#include <linux/platform_data/mtd-mxc_nand.h>
-
-#define DRIVER_NAME "mxc_nand"
-
-/* Addresses for NFC registers */
-#define NFC_V1_V2_BUF_SIZE		(host->regs + 0x00)
-#define NFC_V1_V2_BUF_ADDR		(host->regs + 0x04)
-#define NFC_V1_V2_FLASH_ADDR		(host->regs + 0x06)
-#define NFC_V1_V2_FLASH_CMD		(host->regs + 0x08)
-#define NFC_V1_V2_CONFIG		(host->regs + 0x0a)
-#define NFC_V1_V2_ECC_STATUS_RESULT	(host->regs + 0x0c)
-#define NFC_V1_V2_RSLTMAIN_AREA		(host->regs + 0x0e)
-#define NFC_V1_V2_RSLTSPARE_AREA	(host->regs + 0x10)
-#define NFC_V1_V2_WRPROT		(host->regs + 0x12)
-#define NFC_V1_UNLOCKSTART_BLKADDR	(host->regs + 0x14)
-#define NFC_V1_UNLOCKEND_BLKADDR	(host->regs + 0x16)
-#define NFC_V21_UNLOCKSTART_BLKADDR0	(host->regs + 0x20)
-#define NFC_V21_UNLOCKSTART_BLKADDR1	(host->regs + 0x24)
-#define NFC_V21_UNLOCKSTART_BLKADDR2	(host->regs + 0x28)
-#define NFC_V21_UNLOCKSTART_BLKADDR3	(host->regs + 0x2c)
-#define NFC_V21_UNLOCKEND_BLKADDR0	(host->regs + 0x22)
-#define NFC_V21_UNLOCKEND_BLKADDR1	(host->regs + 0x26)
-#define NFC_V21_UNLOCKEND_BLKADDR2	(host->regs + 0x2a)
-#define NFC_V21_UNLOCKEND_BLKADDR3	(host->regs + 0x2e)
-#define NFC_V1_V2_NF_WRPRST		(host->regs + 0x18)
-#define NFC_V1_V2_CONFIG1		(host->regs + 0x1a)
-#define NFC_V1_V2_CONFIG2		(host->regs + 0x1c)
-
-#define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
-#define NFC_V1_V2_CONFIG1_SP_EN		(1 << 2)
-#define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
-#define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
-#define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
-#define NFC_V1_V2_CONFIG1_RST		(1 << 6)
-#define NFC_V1_V2_CONFIG1_CE		(1 << 7)
-#define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
-#define NFC_V2_CONFIG1_PPB(x)		(((x) & 0x3) << 9)
-#define NFC_V2_CONFIG1_FP_INT		(1 << 11)
-
-#define NFC_V1_V2_CONFIG2_INT		(1 << 15)
-
-/*
- * Operation modes for the NFC. Valid for v1, v2 and v3
- * type controllers.
- */
-#define NFC_CMD				(1 << 0)
-#define NFC_ADDR			(1 << 1)
-#define NFC_INPUT			(1 << 2)
-#define NFC_OUTPUT			(1 << 3)
-#define NFC_ID				(1 << 4)
-#define NFC_STATUS			(1 << 5)
-
-#define NFC_V3_FLASH_CMD		(host->regs_axi + 0x00)
-#define NFC_V3_FLASH_ADDR0		(host->regs_axi + 0x04)
-
-#define NFC_V3_CONFIG1			(host->regs_axi + 0x34)
-#define NFC_V3_CONFIG1_SP_EN		(1 << 0)
-#define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7 ) << 4)
-
-#define NFC_V3_ECC_STATUS_RESULT	(host->regs_axi + 0x38)
-
-#define NFC_V3_LAUNCH			(host->regs_axi + 0x40)
-
-#define NFC_V3_WRPROT			(host->regs_ip + 0x0)
-#define NFC_V3_WRPROT_LOCK_TIGHT	(1 << 0)
-#define NFC_V3_WRPROT_LOCK		(1 << 1)
-#define NFC_V3_WRPROT_UNLOCK		(1 << 2)
-#define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)
-
-#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0   (host->regs_ip + 0x04)
-
-#define NFC_V3_CONFIG2			(host->regs_ip + 0x24)
-#define NFC_V3_CONFIG2_PS_512			(0 << 0)
-#define NFC_V3_CONFIG2_PS_2048			(1 << 0)
-#define NFC_V3_CONFIG2_PS_4096			(2 << 0)
-#define NFC_V3_CONFIG2_ONE_CYCLE		(1 << 2)
-#define NFC_V3_CONFIG2_ECC_EN			(1 << 3)
-#define NFC_V3_CONFIG2_2CMD_PHASES		(1 << 4)
-#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0		(1 << 5)
-#define NFC_V3_CONFIG2_ECC_MODE_8		(1 << 6)
-#define NFC_V3_CONFIG2_PPB(x, shift)		(((x) & 0x3) << shift)
-#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x)	(((x) & 0x3) << 12)
-#define NFC_V3_CONFIG2_INT_MSK			(1 << 15)
-#define NFC_V3_CONFIG2_ST_CMD(x)		(((x) & 0xff) << 24)
-#define NFC_V3_CONFIG2_SPAS(x)			(((x) & 0xff) << 16)
-
-#define NFC_V3_CONFIG3				(host->regs_ip + 0x28)
-#define NFC_V3_CONFIG3_ADD_OP(x)		(((x) & 0x3) << 0)
-#define NFC_V3_CONFIG3_FW8			(1 << 3)
-#define NFC_V3_CONFIG3_SBB(x)			(((x) & 0x7) << 8)
-#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x)	(((x) & 0x7) << 12)
-#define NFC_V3_CONFIG3_RBB_MODE			(1 << 15)
-#define NFC_V3_CONFIG3_NO_SDMA			(1 << 20)
-
-#define NFC_V3_IPC			(host->regs_ip + 0x2C)
-#define NFC_V3_IPC_CREQ			(1 << 0)
-#define NFC_V3_IPC_INT			(1 << 31)
-
-#define NFC_V3_DELAY_LINE		(host->regs_ip + 0x34)
-
-struct mxc_nand_host;
-
-struct mxc_nand_devtype_data {
-	void (*preset)(struct mtd_info *);
-	int (*read_page)(struct nand_chip *chip, void *buf, void *oob, bool ecc,
-			 int page);
-	void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
-	void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
-	void (*send_page)(struct mtd_info *, unsigned int);
-	void (*send_read_id)(struct mxc_nand_host *);
-	uint16_t (*get_dev_status)(struct mxc_nand_host *);
-	int (*check_int)(struct mxc_nand_host *);
-	void (*irq_control)(struct mxc_nand_host *, int);
-	u32 (*get_ecc_status)(struct mxc_nand_host *);
-	const struct mtd_ooblayout_ops *ooblayout;
-	void (*select_chip)(struct mtd_info *mtd, int chip);
-	int (*setup_data_interface)(struct mtd_info *mtd, int csline,
-				    const struct nand_data_interface *conf);
-	void (*enable_hwecc)(struct nand_chip *chip, bool enable);
-
-	/*
-	 * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
-	 * (CONFIG1:INT_MSK is set). To handle this the driver uses
-	 * enable_irq/disable_irq_nosync instead of CONFIG1:INT_MSK
-	 */
-	int irqpending_quirk;
-	int needs_ip;
-
-	size_t regs_offset;
-	size_t spare0_offset;
-	size_t axi_offset;
-
-	int spare_len;
-	int eccbytes;
-	int eccsize;
-	int ppb_shift;
-};
-
-struct mxc_nand_host {
-	struct nand_chip	nand;
-	struct device		*dev;
-
-	void __iomem		*spare0;
-	void __iomem		*main_area0;
-
-	void __iomem		*base;
-	void __iomem		*regs;
-	void __iomem		*regs_axi;
-	void __iomem		*regs_ip;
-	int			status_request;
-	struct clk		*clk;
-	int			clk_act;
-	int			irq;
-	int			eccsize;
-	int			used_oobsize;
-	int			active_cs;
-
-	struct completion	op_completion;
-
-	uint8_t			*data_buf;
-	unsigned int		buf_start;
-
-	const struct mxc_nand_devtype_data *devtype_data;
-	struct mxc_nand_platform_data pdata;
-};
-
-static const char * const part_probes[] = {
-	"cmdlinepart", "RedBoot", "ofpart", NULL };
-
-static void memcpy32_fromio(void *trg, const void __iomem  *src, size_t size)
-{
-	int i;
-	u32 *t = trg;
-	const __iomem u32 *s = src;
-
-	for (i = 0; i < (size >> 2); i++)
-		*t++ = __raw_readl(s++);
-}
-
-static void memcpy16_fromio(void *trg, const void __iomem  *src, size_t size)
-{
-	int i;
-	u16 *t = trg;
-	const __iomem u16 *s = src;
-
-	/* We assume that src (IO) is always 32bit aligned */
-	if (PTR_ALIGN(trg, 4) == trg && IS_ALIGNED(size, 4)) {
-		memcpy32_fromio(trg, src, size);
-		return;
-	}
-
-	for (i = 0; i < (size >> 1); i++)
-		*t++ = __raw_readw(s++);
-}
-
-static inline void memcpy32_toio(void __iomem *trg, const void *src, int size)
-{
-	/* __iowrite32_copy use 32bit size values so divide by 4 */
-	__iowrite32_copy(trg, src, size / 4);
-}
-
-static void memcpy16_toio(void __iomem *trg, const void *src, int size)
-{
-	int i;
-	__iomem u16 *t = trg;
-	const u16 *s = src;
-
-	/* We assume that trg (IO) is always 32bit aligned */
-	if (PTR_ALIGN(src, 4) == src && IS_ALIGNED(size, 4)) {
-		memcpy32_toio(trg, src, size);
-		return;
-	}
-
-	for (i = 0; i < (size >> 1); i++)
-		__raw_writew(*s++, t++);
-}
-
-/*
- * The controller splits a page into data chunks of 512 bytes + partial oob.
- * There are writesize / 512 such chunks, the size of the partial oob parts is
- * oobsize / #chunks rounded down to a multiple of 2. The last oob chunk then
- * contains additionally the byte lost by rounding (if any).
- * This function handles the needed shuffling between host->data_buf (which
- * holds a page in natural order, i.e. writesize bytes data + oobsize bytes
- * spare) and the NFC buffer.
- */
-static void copy_spare(struct mtd_info *mtd, bool bfrom, void *buf)
-{
-	struct nand_chip *this = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(this);
-	u16 i, oob_chunk_size;
-	u16 num_chunks = mtd->writesize / 512;
-
-	u8 *d = buf;
-	u8 __iomem *s = host->spare0;
-	u16 sparebuf_size = host->devtype_data->spare_len;
-
-	/* size of oob chunk for all but possibly the last one */
-	oob_chunk_size = (host->used_oobsize / num_chunks) & ~1;
-
-	if (bfrom) {
-		for (i = 0; i < num_chunks - 1; i++)
-			memcpy16_fromio(d + i * oob_chunk_size,
-					s + i * sparebuf_size,
-					oob_chunk_size);
-
-		/* the last chunk */
-		memcpy16_fromio(d + i * oob_chunk_size,
-				s + i * sparebuf_size,
-				host->used_oobsize - i * oob_chunk_size);
-	} else {
-		for (i = 0; i < num_chunks - 1; i++)
-			memcpy16_toio(&s[i * sparebuf_size],
-				      &d[i * oob_chunk_size],
-				      oob_chunk_size);
-
-		/* the last chunk */
-		memcpy16_toio(&s[i * sparebuf_size],
-			      &d[i * oob_chunk_size],
-			      host->used_oobsize - i * oob_chunk_size);
-	}
-}
-
-/*
- * MXC NANDFC can only perform full page+spare or spare-only read/write.  When
- * the upper layers perform a read/write buf operation, the saved column address
- * is used to index into the full page. So usually this function is called with
- * column == 0 (unless no column cycle is needed indicated by column == -1)
- */
-static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-
-	/* Write out column address, if necessary */
-	if (column != -1) {
-		host->devtype_data->send_addr(host, column & 0xff,
-					      page_addr == -1);
-		if (mtd->writesize > 512)
-			/* another col addr cycle for 2k page */
-			host->devtype_data->send_addr(host,
-						      (column >> 8) & 0xff,
-						      false);
-	}
-
-	/* Write out page address, if necessary */
-	if (page_addr != -1) {
-		/* paddr_0 - p_addr_7 */
-		host->devtype_data->send_addr(host, (page_addr & 0xff), false);
-
-		if (mtd->writesize > 512) {
-			if (mtd->size >= 0x10000000) {
-				/* paddr_8 - paddr_15 */
-				host->devtype_data->send_addr(host,
-						(page_addr >> 8) & 0xff,
-						false);
-				host->devtype_data->send_addr(host,
-						(page_addr >> 16) & 0xff,
-						true);
-			} else
-				/* paddr_8 - paddr_15 */
-				host->devtype_data->send_addr(host,
-						(page_addr >> 8) & 0xff, true);
-		} else {
-			if (nand_chip->options & NAND_ROW_ADDR_3) {
-				/* paddr_8 - paddr_15 */
-				host->devtype_data->send_addr(host,
-						(page_addr >> 8) & 0xff,
-						false);
-				host->devtype_data->send_addr(host,
-						(page_addr >> 16) & 0xff,
-						true);
-			} else
-				/* paddr_8 - paddr_15 */
-				host->devtype_data->send_addr(host,
-						(page_addr >> 8) & 0xff, true);
-		}
-	}
-}
-
-static int check_int_v3(struct mxc_nand_host *host)
-{
-	uint32_t tmp;
-
-	tmp = readl(NFC_V3_IPC);
-	if (!(tmp & NFC_V3_IPC_INT))
-		return 0;
-
-	tmp &= ~NFC_V3_IPC_INT;
-	writel(tmp, NFC_V3_IPC);
-
-	return 1;
-}
-
-static int check_int_v1_v2(struct mxc_nand_host *host)
-{
-	uint32_t tmp;
-
-	tmp = readw(NFC_V1_V2_CONFIG2);
-	if (!(tmp & NFC_V1_V2_CONFIG2_INT))
-		return 0;
-
-	if (!host->devtype_data->irqpending_quirk)
-		writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
-
-	return 1;
-}
-
-static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
-{
-	uint16_t tmp;
-
-	tmp = readw(NFC_V1_V2_CONFIG1);
-
-	if (activate)
-		tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
-	else
-		tmp |= NFC_V1_V2_CONFIG1_INT_MSK;
-
-	writew(tmp, NFC_V1_V2_CONFIG1);
-}
-
-static void irq_control_v3(struct mxc_nand_host *host, int activate)
-{
-	uint32_t tmp;
-
-	tmp = readl(NFC_V3_CONFIG2);
-
-	if (activate)
-		tmp &= ~NFC_V3_CONFIG2_INT_MSK;
-	else
-		tmp |= NFC_V3_CONFIG2_INT_MSK;
-
-	writel(tmp, NFC_V3_CONFIG2);
-}
-
-static void irq_control(struct mxc_nand_host *host, int activate)
-{
-	if (host->devtype_data->irqpending_quirk) {
-		if (activate)
-			enable_irq(host->irq);
-		else
-			disable_irq_nosync(host->irq);
-	} else {
-		host->devtype_data->irq_control(host, activate);
-	}
-}
-
-static u32 get_ecc_status_v1(struct mxc_nand_host *host)
-{
-	return readw(NFC_V1_V2_ECC_STATUS_RESULT);
-}
-
-static u32 get_ecc_status_v2(struct mxc_nand_host *host)
-{
-	return readl(NFC_V1_V2_ECC_STATUS_RESULT);
-}
-
-static u32 get_ecc_status_v3(struct mxc_nand_host *host)
-{
-	return readl(NFC_V3_ECC_STATUS_RESULT);
-}
-
-static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
-{
-	struct mxc_nand_host *host = dev_id;
-
-	if (!host->devtype_data->check_int(host))
-		return IRQ_NONE;
-
-	irq_control(host, 0);
-
-	complete(&host->op_completion);
-
-	return IRQ_HANDLED;
-}
-
-/* This function polls the NANDFC to wait for the basic operation to
- * complete by checking the INT bit of config2 register.
- */
-static int wait_op_done(struct mxc_nand_host *host, int useirq)
-{
-	int ret = 0;
-
-	/*
-	 * If operation is already complete, don't bother to setup an irq or a
-	 * loop.
-	 */
-	if (host->devtype_data->check_int(host))
-		return 0;
-
-	if (useirq) {
-		unsigned long timeout;
-
-		reinit_completion(&host->op_completion);
-
-		irq_control(host, 1);
-
-		timeout = wait_for_completion_timeout(&host->op_completion, HZ);
-		if (!timeout && !host->devtype_data->check_int(host)) {
-			dev_dbg(host->dev, "timeout waiting for irq\n");
-			ret = -ETIMEDOUT;
-		}
-	} else {
-		int max_retries = 8000;
-		int done;
-
-		do {
-			udelay(1);
-
-			done = host->devtype_data->check_int(host);
-			if (done)
-				break;
-
-		} while (--max_retries);
-
-		if (!done) {
-			dev_dbg(host->dev, "timeout polling for completion\n");
-			ret = -ETIMEDOUT;
-		}
-	}
-
-	WARN_ONCE(ret < 0, "timeout! useirq=%d\n", useirq);
-
-	return ret;
-}
-
-static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
-{
-	/* fill command */
-	writel(cmd, NFC_V3_FLASH_CMD);
-
-	/* send out command */
-	writel(NFC_CMD, NFC_V3_LAUNCH);
-
-	/* Wait for operation to complete */
-	wait_op_done(host, useirq);
-}
-
-/* This function issues the specified command to the NAND device and
- * waits for completion. */
-static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
-{
-	dev_dbg(host->dev, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
-
-	writew(cmd, NFC_V1_V2_FLASH_CMD);
-	writew(NFC_CMD, NFC_V1_V2_CONFIG2);
-
-	if (host->devtype_data->irqpending_quirk && (cmd == NAND_CMD_RESET)) {
-		int max_retries = 100;
-		/* Reset completion is indicated by NFC_CONFIG2 */
-		/* being set to 0 */
-		while (max_retries-- > 0) {
-			if (readw(NFC_V1_V2_CONFIG2) == 0) {
-				break;
-			}
-			udelay(1);
-		}
-		if (max_retries < 0)
-			dev_dbg(host->dev, "%s: RESET failed\n", __func__);
-	} else {
-		/* Wait for operation to complete */
-		wait_op_done(host, useirq);
-	}
-}
-
-static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
-{
-	/* fill address */
-	writel(addr, NFC_V3_FLASH_ADDR0);
-
-	/* send out address */
-	writel(NFC_ADDR, NFC_V3_LAUNCH);
-
-	wait_op_done(host, 0);
-}
-
-/* This function sends an address (or partial address) to the
- * NAND device. The address is used to select the source/destination for
- * a NAND command. */
-static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
-{
-	dev_dbg(host->dev, "send_addr(host, 0x%x %d)\n", addr, islast);
-
-	writew(addr, NFC_V1_V2_FLASH_ADDR);
-	writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
-
-	/* Wait for operation to complete */
-	wait_op_done(host, islast);
-}
-
-static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	uint32_t tmp;
-
-	tmp = readl(NFC_V3_CONFIG1);
-	tmp &= ~(7 << 4);
-	writel(tmp, NFC_V3_CONFIG1);
-
-	/* transfer data from NFC ram to nand */
-	writel(ops, NFC_V3_LAUNCH);
-
-	wait_op_done(host, false);
-}
-
-static void send_page_v2(struct mtd_info *mtd, unsigned int ops)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-
-	/* NANDFC buffer 0 is used for page read/write */
-	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
-
-	writew(ops, NFC_V1_V2_CONFIG2);
-
-	/* Wait for operation to complete */
-	wait_op_done(host, true);
-}
-
-static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	int bufs, i;
-
-	if (mtd->writesize > 512)
-		bufs = 4;
-	else
-		bufs = 1;
-
-	for (i = 0; i < bufs; i++) {
-
-		/* NANDFC buffer 0 is used for page read/write */
-		writew((host->active_cs << 4) | i, NFC_V1_V2_BUF_ADDR);
-
-		writew(ops, NFC_V1_V2_CONFIG2);
-
-		/* Wait for operation to complete */
-		wait_op_done(host, true);
-	}
-}
-
-static void send_read_id_v3(struct mxc_nand_host *host)
-{
-	/* Read ID into main buffer */
-	writel(NFC_ID, NFC_V3_LAUNCH);
-
-	wait_op_done(host, true);
-
-	memcpy32_fromio(host->data_buf, host->main_area0, 16);
-}
-
-/* Request the NANDFC to perform a read of the NAND device ID. */
-static void send_read_id_v1_v2(struct mxc_nand_host *host)
-{
-	/* NANDFC buffer 0 is used for device ID output */
-	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
-
-	writew(NFC_ID, NFC_V1_V2_CONFIG2);
-
-	/* Wait for operation to complete */
-	wait_op_done(host, true);
-
-	memcpy32_fromio(host->data_buf, host->main_area0, 16);
-}
-
-static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
-{
-	writew(NFC_STATUS, NFC_V3_LAUNCH);
-	wait_op_done(host, true);
-
-	return readl(NFC_V3_CONFIG1) >> 16;
-}
-
-/* This function requests the NANDFC to perform a read of the
- * NAND device status and returns the current status. */
-static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
-{
-	void __iomem *main_buf = host->main_area0;
-	uint32_t store;
-	uint16_t ret;
-
-	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
-
-	/*
-	 * The device status is stored in main_area0. To
-	 * prevent corruption of the buffer save the value
-	 * and restore it afterwards.
-	 */
-	store = readl(main_buf);
-
-	writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
-	wait_op_done(host, true);
-
-	ret = readw(main_buf);
-
-	writel(store, main_buf);
-
-	return ret;
-}
-
-static void mxc_nand_enable_hwecc_v1_v2(struct nand_chip *chip, bool enable)
-{
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	uint16_t config1;
-
-	if (chip->ecc.mode != NAND_ECC_HW)
-		return;
-
-	config1 = readw(NFC_V1_V2_CONFIG1);
-
-	if (enable)
-		config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
-	else
-		config1 &= ~NFC_V1_V2_CONFIG1_ECC_EN;
-
-	writew(config1, NFC_V1_V2_CONFIG1);
-}
-
-static void mxc_nand_enable_hwecc_v3(struct nand_chip *chip, bool enable)
-{
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	uint32_t config2;
-
-	if (chip->ecc.mode != NAND_ECC_HW)
-		return;
-
-	config2 = readl(NFC_V3_CONFIG2);
-
-	if (enable)
-		config2 |= NFC_V3_CONFIG2_ECC_EN;
-	else
-		config2 &= ~NFC_V3_CONFIG2_ECC_EN;
-
-	writel(config2, NFC_V3_CONFIG2);
-}
-
-/* This functions is used by upper layer to checks if device is ready */
-static int mxc_nand_dev_ready(struct mtd_info *mtd)
-{
-	/*
-	 * NFC handles R/B internally. Therefore, this function
-	 * always returns status as ready.
-	 */
-	return 1;
-}
-
-static int mxc_nand_read_page_v1(struct nand_chip *chip, void *buf, void *oob,
-				 bool ecc, int page)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	unsigned int bitflips_corrected = 0;
-	int no_subpages;
-	int i;
-
-	host->devtype_data->enable_hwecc(chip, ecc);
-
-	host->devtype_data->send_cmd(host, NAND_CMD_READ0, false);
-	mxc_do_addr_cycle(mtd, 0, page);
-
-	if (mtd->writesize > 512)
-		host->devtype_data->send_cmd(host, NAND_CMD_READSTART, true);
-
-	no_subpages = mtd->writesize >> 9;
-
-	for (i = 0; i < no_subpages; i++) {
-		uint16_t ecc_stats;
-
-		/* NANDFC buffer 0 is used for page read/write */
-		writew((host->active_cs << 4) | i, NFC_V1_V2_BUF_ADDR);
-
-		writew(NFC_OUTPUT, NFC_V1_V2_CONFIG2);
-
-		/* Wait for operation to complete */
-		wait_op_done(host, true);
-
-		ecc_stats = get_ecc_status_v1(host);
-
-		ecc_stats >>= 2;
-
-		if (buf && ecc) {
-			switch (ecc_stats & 0x3) {
-			case 0:
-			default:
-				break;
-			case 1:
-				mtd->ecc_stats.corrected++;
-				bitflips_corrected = 1;
-				break;
-			case 2:
-				mtd->ecc_stats.failed++;
-				break;
-			}
-		}
-	}
-
-	if (buf)
-		memcpy32_fromio(buf, host->main_area0, mtd->writesize);
-	if (oob)
-		copy_spare(mtd, true, oob);
-
-	return bitflips_corrected;
-}
-
-static int mxc_nand_read_page_v2_v3(struct nand_chip *chip, void *buf,
-				    void *oob, bool ecc, int page)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	unsigned int max_bitflips = 0;
-	u32 ecc_stat, err;
-	int no_subpages;
-	u8 ecc_bit_mask, err_limit;
-
-	host->devtype_data->enable_hwecc(chip, ecc);
-
-	host->devtype_data->send_cmd(host, NAND_CMD_READ0, false);
-	mxc_do_addr_cycle(mtd, 0, page);
-
-	if (mtd->writesize > 512)
-		host->devtype_data->send_cmd(host,
-				NAND_CMD_READSTART, true);
-
-	host->devtype_data->send_page(mtd, NFC_OUTPUT);
-
-	if (buf)
-		memcpy32_fromio(buf, host->main_area0, mtd->writesize);
-	if (oob)
-		copy_spare(mtd, true, oob);
-
-	ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
-	err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
-
-	no_subpages = mtd->writesize >> 9;
-
-	ecc_stat = host->devtype_data->get_ecc_status(host);
-
-	do {
-		err = ecc_stat & ecc_bit_mask;
-		if (err > err_limit) {
-			mtd->ecc_stats.failed++;
-		} else {
-			mtd->ecc_stats.corrected += err;
-			max_bitflips = max_t(unsigned int, max_bitflips, err);
-		}
-
-		ecc_stat >>= 4;
-	} while (--no_subpages);
-
-	return max_bitflips;
-}
-
-static int mxc_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-			      uint8_t *buf, int oob_required, int page)
-{
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	void *oob_buf;
-
-	if (oob_required)
-		oob_buf = chip->oob_poi;
-	else
-		oob_buf = NULL;
-
-	return host->devtype_data->read_page(chip, buf, oob_buf, 1, page);
-}
-
-static int mxc_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-				  uint8_t *buf, int oob_required, int page)
-{
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	void *oob_buf;
-
-	if (oob_required)
-		oob_buf = chip->oob_poi;
-	else
-		oob_buf = NULL;
-
-	return host->devtype_data->read_page(chip, buf, oob_buf, 0, page);
-}
-
-static int mxc_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-			     int page)
-{
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-
-	return host->devtype_data->read_page(chip, NULL, chip->oob_poi, 0,
-					     page);
-}
-
-static int mxc_nand_write_page(struct nand_chip *chip, const uint8_t *buf,
-			       bool ecc, int page)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-
-	host->devtype_data->enable_hwecc(chip, ecc);
-
-	host->devtype_data->send_cmd(host, NAND_CMD_SEQIN, false);
-	mxc_do_addr_cycle(mtd, 0, page);
-
-	memcpy32_toio(host->main_area0, buf, mtd->writesize);
-	copy_spare(mtd, false, chip->oob_poi);
-
-	host->devtype_data->send_page(mtd, NFC_INPUT);
-	host->devtype_data->send_cmd(host, NAND_CMD_PAGEPROG, true);
-	mxc_do_addr_cycle(mtd, 0, page);
-
-	return 0;
-}
-
-static int mxc_nand_write_page_ecc(struct mtd_info *mtd, struct nand_chip *chip,
-				   const uint8_t *buf, int oob_required,
-				   int page)
-{
-	return mxc_nand_write_page(chip, buf, true, page);
-}
-
-static int mxc_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-				   const uint8_t *buf, int oob_required, int page)
-{
-	return mxc_nand_write_page(chip, buf, false, page);
-}
-
-static int mxc_nand_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
-			      int page)
-{
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-
-	memset(host->data_buf, 0xff, mtd->writesize);
-
-	return mxc_nand_write_page(chip, host->data_buf, false, page);
-}
-
-static u_char mxc_nand_read_byte(struct mtd_info *mtd)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	uint8_t ret;
-
-	/* Check for status request */
-	if (host->status_request)
-		return host->devtype_data->get_dev_status(host) & 0xFF;
-
-	if (nand_chip->options & NAND_BUSWIDTH_16) {
-		/* only take the lower byte of each word */
-		ret = *(uint16_t *)(host->data_buf + host->buf_start);
-
-		host->buf_start += 2;
-	} else {
-		ret = *(uint8_t *)(host->data_buf + host->buf_start);
-		host->buf_start++;
-	}
-
-	dev_dbg(host->dev, "%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
-	return ret;
-}
-
-static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	uint16_t ret;
-
-	ret = *(uint16_t *)(host->data_buf + host->buf_start);
-	host->buf_start += 2;
-
-	return ret;
-}
-
-/* Write data of length len to buffer buf. The data to be
- * written on NAND Flash is first copied to RAMbuffer. After the Data Input
- * Operation by the NFC, the data is written to NAND Flash */
-static void mxc_nand_write_buf(struct mtd_info *mtd,
-				const u_char *buf, int len)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	u16 col = host->buf_start;
-	int n = mtd->oobsize + mtd->writesize - col;
-
-	n = min(n, len);
-
-	memcpy(host->data_buf + col, buf, n);
-
-	host->buf_start += n;
-}
-
-/* Read the data buffer from the NAND Flash. To read the data from NAND
- * Flash first the data output cycle is initiated by the NFC, which copies
- * the data to RAMbuffer. This data of length len is then copied to buffer buf.
- */
-static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	u16 col = host->buf_start;
-	int n = mtd->oobsize + mtd->writesize - col;
-
-	n = min(n, len);
-
-	memcpy(buf, host->data_buf + col, n);
-
-	host->buf_start += n;
-}
-
-/* This function is used by upper layer for select and
- * deselect of the NAND chip */
-static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-
-	if (chip == -1) {
-		/* Disable the NFC clock */
-		if (host->clk_act) {
-			clk_disable_unprepare(host->clk);
-			host->clk_act = 0;
-		}
-		return;
-	}
-
-	if (!host->clk_act) {
-		/* Enable the NFC clock */
-		clk_prepare_enable(host->clk);
-		host->clk_act = 1;
-	}
-}
-
-static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-
-	if (chip == -1) {
-		/* Disable the NFC clock */
-		if (host->clk_act) {
-			clk_disable_unprepare(host->clk);
-			host->clk_act = 0;
-		}
-		return;
-	}
-
-	if (!host->clk_act) {
-		/* Enable the NFC clock */
-		clk_prepare_enable(host->clk);
-		host->clk_act = 1;
-	}
-
-	host->active_cs = chip;
-	writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
-}
-
-#define MXC_V1_ECCBYTES		5
-
-static int mxc_v1_ooblayout_ecc(struct mtd_info *mtd, int section,
-				struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-
-	if (section >= nand_chip->ecc.steps)
-		return -ERANGE;
-
-	oobregion->offset = (section * 16) + 6;
-	oobregion->length = MXC_V1_ECCBYTES;
-
-	return 0;
-}
-
-static int mxc_v1_ooblayout_free(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-
-	if (section > nand_chip->ecc.steps)
-		return -ERANGE;
-
-	if (!section) {
-		if (mtd->writesize <= 512) {
-			oobregion->offset = 0;
-			oobregion->length = 5;
-		} else {
-			oobregion->offset = 2;
-			oobregion->length = 4;
-		}
-	} else {
-		oobregion->offset = ((section - 1) * 16) + MXC_V1_ECCBYTES + 6;
-		if (section < nand_chip->ecc.steps)
-			oobregion->length = (section * 16) + 6 -
-					    oobregion->offset;
-		else
-			oobregion->length = mtd->oobsize - oobregion->offset;
-	}
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops mxc_v1_ooblayout_ops = {
-	.ecc = mxc_v1_ooblayout_ecc,
-	.free = mxc_v1_ooblayout_free,
-};
-
-static int mxc_v2_ooblayout_ecc(struct mtd_info *mtd, int section,
-				struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
-
-	if (section >= nand_chip->ecc.steps)
-		return -ERANGE;
-
-	oobregion->offset = (section * stepsize) + 7;
-	oobregion->length = nand_chip->ecc.bytes;
-
-	return 0;
-}
-
-static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26;
-
-	if (section >= nand_chip->ecc.steps)
-		return -ERANGE;
-
-	if (!section) {
-		if (mtd->writesize <= 512) {
-			oobregion->offset = 0;
-			oobregion->length = 5;
-		} else {
-			oobregion->offset = 2;
-			oobregion->length = 4;
-		}
-	} else {
-		oobregion->offset = section * stepsize;
-		oobregion->length = 7;
-	}
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops mxc_v2_ooblayout_ops = {
-	.ecc = mxc_v2_ooblayout_ecc,
-	.free = mxc_v2_ooblayout_free,
-};
-
-/*
- * v2 and v3 type controllers can do 4bit or 8bit ecc depending
- * on how much oob the nand chip has. For 8bit ecc we need at least
- * 26 bytes of oob data per 512 byte block.
- */
-static int get_eccsize(struct mtd_info *mtd)
-{
-	int oobbytes_per_512 = 0;
-
-	oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
-
-	if (oobbytes_per_512 < 26)
-		return 4;
-	else
-		return 8;
-}
-
-static void preset_v1(struct mtd_info *mtd)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	uint16_t config1 = 0;
-
-	if (nand_chip->ecc.mode == NAND_ECC_HW && mtd->writesize)
-		config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
-
-	if (!host->devtype_data->irqpending_quirk)
-		config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
-
-	host->eccsize = 1;
-
-	writew(config1, NFC_V1_V2_CONFIG1);
-	/* preset operation */
-
-	/* Unlock the internal RAM Buffer */
-	writew(0x2, NFC_V1_V2_CONFIG);
-
-	/* Blocks to be unlocked */
-	writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
-	writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
-
-	/* Unlock Block Command for given address range */
-	writew(0x4, NFC_V1_V2_WRPROT);
-}
-
-static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd, int csline,
-					const struct nand_data_interface *conf)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	int tRC_min_ns, tRC_ps, ret;
-	unsigned long rate, rate_round;
-	const struct nand_sdr_timings *timings;
-	u16 config1;
-
-	timings = nand_get_sdr_timings(conf);
-	if (IS_ERR(timings))
-		return -ENOTSUPP;
-
-	config1 = readw(NFC_V1_V2_CONFIG1);
-
-	tRC_min_ns = timings->tRC_min / 1000;
-	rate = 1000000000 / tRC_min_ns;
-
-	/*
-	 * For tRC < 30ns we have to use EDO mode. In this case the controller
-	 * does one access per clock cycle. Otherwise the controller does one
-	 * access in two clock cycles, thus we have to double the rate to the
-	 * controller.
-	 */
-	if (tRC_min_ns < 30) {
-		rate_round = clk_round_rate(host->clk, rate);
-		config1 |= NFC_V2_CONFIG1_ONE_CYCLE;
-		tRC_ps = 1000000000 / (rate_round / 1000);
-	} else {
-		rate *= 2;
-		rate_round = clk_round_rate(host->clk, rate);
-		config1 &= ~NFC_V2_CONFIG1_ONE_CYCLE;
-		tRC_ps = 1000000000 / (rate_round / 1000 / 2);
-	}
-
-	/*
-	 * The timing values compared against are from the i.MX25 Automotive
-	 * datasheet, Table 50. NFC Timing Parameters
-	 */
-	if (timings->tCLS_min > tRC_ps - 1000 ||
-	    timings->tCLH_min > tRC_ps - 2000 ||
-	    timings->tCS_min > tRC_ps - 1000 ||
-	    timings->tCH_min > tRC_ps - 2000 ||
-	    timings->tWP_min > tRC_ps - 1500 ||
-	    timings->tALS_min > tRC_ps ||
-	    timings->tALH_min > tRC_ps - 3000 ||
-	    timings->tDS_min > tRC_ps ||
-	    timings->tDH_min > tRC_ps - 5000 ||
-	    timings->tWC_min > 2 * tRC_ps ||
-	    timings->tWH_min > tRC_ps - 2500 ||
-	    timings->tRR_min > 6 * tRC_ps ||
-	    timings->tRP_min > 3 * tRC_ps / 2 ||
-	    timings->tRC_min > 2 * tRC_ps ||
-	    timings->tREH_min > (tRC_ps / 2) - 2500) {
-		dev_dbg(host->dev, "Timing out of bounds\n");
-		return -EINVAL;
-	}
-
-	if (csline == NAND_DATA_IFACE_CHECK_ONLY)
-		return 0;
-
-	ret = clk_set_rate(host->clk, rate);
-	if (ret)
-		return ret;
-
-	writew(config1, NFC_V1_V2_CONFIG1);
-
-	dev_dbg(host->dev, "Setting rate to %ldHz, %s mode\n", rate_round,
-		config1 & NFC_V2_CONFIG1_ONE_CYCLE ? "One cycle (EDO)" :
-		"normal");
-
-	return 0;
-}
-
-static void preset_v2(struct mtd_info *mtd)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	uint16_t config1 = 0;
-
-	config1 |= NFC_V2_CONFIG1_FP_INT;
-
-	if (!host->devtype_data->irqpending_quirk)
-		config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
-
-	if (mtd->writesize) {
-		uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
-
-		if (nand_chip->ecc.mode == NAND_ECC_HW)
-			config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
-
-		host->eccsize = get_eccsize(mtd);
-		if (host->eccsize == 4)
-			config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
-
-		config1 |= NFC_V2_CONFIG1_PPB(ffs(pages_per_block) - 6);
-	} else {
-		host->eccsize = 1;
-	}
-
-	writew(config1, NFC_V1_V2_CONFIG1);
-	/* preset operation */
-
-	/* Unlock the internal RAM Buffer */
-	writew(0x2, NFC_V1_V2_CONFIG);
-
-	/* Blocks to be unlocked */
-	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
-	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
-	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
-	writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
-	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
-	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
-	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
-	writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
-
-	/* Unlock Block Command for given address range */
-	writew(0x4, NFC_V1_V2_WRPROT);
-}
-
-static void preset_v3(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	uint32_t config2, config3;
-	int i, addr_phases;
-
-	writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
-	writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
-
-	/* Unlock the internal RAM Buffer */
-	writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
-			NFC_V3_WRPROT);
-
-	/* Blocks to be unlocked */
-	for (i = 0; i < NAND_MAX_CHIPS; i++)
-		writel(0xffff << 16, NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
-
-	writel(0, NFC_V3_IPC);
-
-	config2 = NFC_V3_CONFIG2_ONE_CYCLE |
-		NFC_V3_CONFIG2_2CMD_PHASES |
-		NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
-		NFC_V3_CONFIG2_ST_CMD(0x70) |
-		NFC_V3_CONFIG2_INT_MSK |
-		NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
-
-	addr_phases = fls(chip->pagemask) >> 3;
-
-	if (mtd->writesize == 2048) {
-		config2 |= NFC_V3_CONFIG2_PS_2048;
-		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
-	} else if (mtd->writesize == 4096) {
-		config2 |= NFC_V3_CONFIG2_PS_4096;
-		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
-	} else {
-		config2 |= NFC_V3_CONFIG2_PS_512;
-		config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
-	}
-
-	if (mtd->writesize) {
-		if (chip->ecc.mode == NAND_ECC_HW)
-			config2 |= NFC_V3_CONFIG2_ECC_EN;
-
-		config2 |= NFC_V3_CONFIG2_PPB(
-				ffs(mtd->erasesize / mtd->writesize) - 6,
-				host->devtype_data->ppb_shift);
-		host->eccsize = get_eccsize(mtd);
-		if (host->eccsize == 8)
-			config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
-	}
-
-	writel(config2, NFC_V3_CONFIG2);
-
-	config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
-			NFC_V3_CONFIG3_NO_SDMA |
-			NFC_V3_CONFIG3_RBB_MODE |
-			NFC_V3_CONFIG3_SBB(6) | /* Reset default */
-			NFC_V3_CONFIG3_ADD_OP(0);
-
-	if (!(chip->options & NAND_BUSWIDTH_16))
-		config3 |= NFC_V3_CONFIG3_FW8;
-
-	writel(config3, NFC_V3_CONFIG3);
-
-	writel(0, NFC_V3_DELAY_LINE);
-}
-
-/* Used by the upper layer to write command to NAND Flash for
- * different operations to be carried out on NAND Flash */
-static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
-				int column, int page_addr)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-
-	dev_dbg(host->dev, "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
-	      command, column, page_addr);
-
-	/* Reset command state information */
-	host->status_request = false;
-
-	/* Command pre-processing step */
-	switch (command) {
-	case NAND_CMD_RESET:
-		host->devtype_data->preset(mtd);
-		host->devtype_data->send_cmd(host, command, false);
-		break;
-
-	case NAND_CMD_STATUS:
-		host->buf_start = 0;
-		host->status_request = true;
-
-		host->devtype_data->send_cmd(host, command, true);
-		WARN_ONCE(column != -1 || page_addr != -1,
-			  "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
-			  command, column, page_addr);
-		mxc_do_addr_cycle(mtd, column, page_addr);
-		break;
-
-	case NAND_CMD_READID:
-		host->devtype_data->send_cmd(host, command, true);
-		mxc_do_addr_cycle(mtd, column, page_addr);
-		host->devtype_data->send_read_id(host);
-		host->buf_start = 0;
-		break;
-
-	case NAND_CMD_ERASE1:
-	case NAND_CMD_ERASE2:
-		host->devtype_data->send_cmd(host, command, false);
-		WARN_ONCE(column != -1,
-			  "Unexpected column value (cmd=%u, col=%d)\n",
-			  command, column);
-		mxc_do_addr_cycle(mtd, column, page_addr);
-
-		break;
-	case NAND_CMD_PARAM:
-		host->devtype_data->send_cmd(host, command, false);
-		mxc_do_addr_cycle(mtd, column, page_addr);
-		host->devtype_data->send_page(mtd, NFC_OUTPUT);
-		memcpy32_fromio(host->data_buf, host->main_area0, 512);
-		host->buf_start = 0;
-		break;
-	default:
-		WARN_ONCE(1, "Unimplemented command (cmd=%u)\n",
-			  command);
-		break;
-	}
-}
-
-static int mxc_nand_onfi_set_features(struct mtd_info *mtd,
-				      struct nand_chip *chip, int addr,
-				      u8 *subfeature_param)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	int i;
-
-	if (!chip->onfi_version ||
-	    !(le16_to_cpu(chip->onfi_params.opt_cmd)
-	      & ONFI_OPT_CMD_SET_GET_FEATURES))
-		return -EINVAL;
-
-	host->buf_start = 0;
-
-	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
-		chip->write_byte(mtd, subfeature_param[i]);
-
-	memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
-	host->devtype_data->send_cmd(host, NAND_CMD_SET_FEATURES, false);
-	mxc_do_addr_cycle(mtd, addr, -1);
-	host->devtype_data->send_page(mtd, NFC_INPUT);
-
-	return 0;
-}
-
-static int mxc_nand_onfi_get_features(struct mtd_info *mtd,
-				      struct nand_chip *chip, int addr,
-				      u8 *subfeature_param)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	int i;
-
-	if (!chip->onfi_version ||
-	    !(le16_to_cpu(chip->onfi_params.opt_cmd)
-	      & ONFI_OPT_CMD_SET_GET_FEATURES))
-		return -EINVAL;
-
-	host->devtype_data->send_cmd(host, NAND_CMD_GET_FEATURES, false);
-	mxc_do_addr_cycle(mtd, addr, -1);
-	host->devtype_data->send_page(mtd, NFC_OUTPUT);
-	memcpy32_fromio(host->data_buf, host->main_area0, 512);
-	host->buf_start = 0;
-
-	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
-		*subfeature_param++ = chip->read_byte(mtd);
-
-	return 0;
-}
-
-/*
- * The generic flash bbt decriptors overlap with our ecc
- * hardware, so define some i.MX specific ones.
- */
-static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
-static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr bbt_main_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-	    | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs = 0,
-	.len = 4,
-	.veroffs = 4,
-	.maxblocks = 4,
-	.pattern = bbt_pattern,
-};
-
-static struct nand_bbt_descr bbt_mirror_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-	    | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs = 0,
-	.len = 4,
-	.veroffs = 4,
-	.maxblocks = 4,
-	.pattern = mirror_pattern,
-};
-
-/* v1 + irqpending_quirk: i.MX21 */
-static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
-	.preset = preset_v1,
-	.read_page = mxc_nand_read_page_v1,
-	.send_cmd = send_cmd_v1_v2,
-	.send_addr = send_addr_v1_v2,
-	.send_page = send_page_v1,
-	.send_read_id = send_read_id_v1_v2,
-	.get_dev_status = get_dev_status_v1_v2,
-	.check_int = check_int_v1_v2,
-	.irq_control = irq_control_v1_v2,
-	.get_ecc_status = get_ecc_status_v1,
-	.ooblayout = &mxc_v1_ooblayout_ops,
-	.select_chip = mxc_nand_select_chip_v1_v3,
-	.enable_hwecc = mxc_nand_enable_hwecc_v1_v2,
-	.irqpending_quirk = 1,
-	.needs_ip = 0,
-	.regs_offset = 0xe00,
-	.spare0_offset = 0x800,
-	.spare_len = 16,
-	.eccbytes = 3,
-	.eccsize = 1,
-};
-
-/* v1 + !irqpending_quirk: i.MX27, i.MX31 */
-static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
-	.preset = preset_v1,
-	.read_page = mxc_nand_read_page_v1,
-	.send_cmd = send_cmd_v1_v2,
-	.send_addr = send_addr_v1_v2,
-	.send_page = send_page_v1,
-	.send_read_id = send_read_id_v1_v2,
-	.get_dev_status = get_dev_status_v1_v2,
-	.check_int = check_int_v1_v2,
-	.irq_control = irq_control_v1_v2,
-	.get_ecc_status = get_ecc_status_v1,
-	.ooblayout = &mxc_v1_ooblayout_ops,
-	.select_chip = mxc_nand_select_chip_v1_v3,
-	.enable_hwecc = mxc_nand_enable_hwecc_v1_v2,
-	.irqpending_quirk = 0,
-	.needs_ip = 0,
-	.regs_offset = 0xe00,
-	.spare0_offset = 0x800,
-	.axi_offset = 0,
-	.spare_len = 16,
-	.eccbytes = 3,
-	.eccsize = 1,
-};
-
-/* v21: i.MX25, i.MX35 */
-static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
-	.preset = preset_v2,
-	.read_page = mxc_nand_read_page_v2_v3,
-	.send_cmd = send_cmd_v1_v2,
-	.send_addr = send_addr_v1_v2,
-	.send_page = send_page_v2,
-	.send_read_id = send_read_id_v1_v2,
-	.get_dev_status = get_dev_status_v1_v2,
-	.check_int = check_int_v1_v2,
-	.irq_control = irq_control_v1_v2,
-	.get_ecc_status = get_ecc_status_v2,
-	.ooblayout = &mxc_v2_ooblayout_ops,
-	.select_chip = mxc_nand_select_chip_v2,
-	.setup_data_interface = mxc_nand_v2_setup_data_interface,
-	.enable_hwecc = mxc_nand_enable_hwecc_v1_v2,
-	.irqpending_quirk = 0,
-	.needs_ip = 0,
-	.regs_offset = 0x1e00,
-	.spare0_offset = 0x1000,
-	.axi_offset = 0,
-	.spare_len = 64,
-	.eccbytes = 9,
-	.eccsize = 0,
-};
-
-/* v3.2a: i.MX51 */
-static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
-	.preset = preset_v3,
-	.read_page = mxc_nand_read_page_v2_v3,
-	.send_cmd = send_cmd_v3,
-	.send_addr = send_addr_v3,
-	.send_page = send_page_v3,
-	.send_read_id = send_read_id_v3,
-	.get_dev_status = get_dev_status_v3,
-	.check_int = check_int_v3,
-	.irq_control = irq_control_v3,
-	.get_ecc_status = get_ecc_status_v3,
-	.ooblayout = &mxc_v2_ooblayout_ops,
-	.select_chip = mxc_nand_select_chip_v1_v3,
-	.enable_hwecc = mxc_nand_enable_hwecc_v3,
-	.irqpending_quirk = 0,
-	.needs_ip = 1,
-	.regs_offset = 0,
-	.spare0_offset = 0x1000,
-	.axi_offset = 0x1e00,
-	.spare_len = 64,
-	.eccbytes = 0,
-	.eccsize = 0,
-	.ppb_shift = 7,
-};
-
-/* v3.2b: i.MX53 */
-static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
-	.preset = preset_v3,
-	.read_page = mxc_nand_read_page_v2_v3,
-	.send_cmd = send_cmd_v3,
-	.send_addr = send_addr_v3,
-	.send_page = send_page_v3,
-	.send_read_id = send_read_id_v3,
-	.get_dev_status = get_dev_status_v3,
-	.check_int = check_int_v3,
-	.irq_control = irq_control_v3,
-	.get_ecc_status = get_ecc_status_v3,
-	.ooblayout = &mxc_v2_ooblayout_ops,
-	.select_chip = mxc_nand_select_chip_v1_v3,
-	.enable_hwecc = mxc_nand_enable_hwecc_v3,
-	.irqpending_quirk = 0,
-	.needs_ip = 1,
-	.regs_offset = 0,
-	.spare0_offset = 0x1000,
-	.axi_offset = 0x1e00,
-	.spare_len = 64,
-	.eccbytes = 0,
-	.eccsize = 0,
-	.ppb_shift = 8,
-};
-
-static inline int is_imx21_nfc(struct mxc_nand_host *host)
-{
-	return host->devtype_data == &imx21_nand_devtype_data;
-}
-
-static inline int is_imx27_nfc(struct mxc_nand_host *host)
-{
-	return host->devtype_data == &imx27_nand_devtype_data;
-}
-
-static inline int is_imx25_nfc(struct mxc_nand_host *host)
-{
-	return host->devtype_data == &imx25_nand_devtype_data;
-}
-
-static inline int is_imx51_nfc(struct mxc_nand_host *host)
-{
-	return host->devtype_data == &imx51_nand_devtype_data;
-}
-
-static inline int is_imx53_nfc(struct mxc_nand_host *host)
-{
-	return host->devtype_data == &imx53_nand_devtype_data;
-}
-
-static const struct platform_device_id mxcnd_devtype[] = {
-	{
-		.name = "imx21-nand",
-		.driver_data = (kernel_ulong_t) &imx21_nand_devtype_data,
-	}, {
-		.name = "imx27-nand",
-		.driver_data = (kernel_ulong_t) &imx27_nand_devtype_data,
-	}, {
-		.name = "imx25-nand",
-		.driver_data = (kernel_ulong_t) &imx25_nand_devtype_data,
-	}, {
-		.name = "imx51-nand",
-		.driver_data = (kernel_ulong_t) &imx51_nand_devtype_data,
-	}, {
-		.name = "imx53-nand",
-		.driver_data = (kernel_ulong_t) &imx53_nand_devtype_data,
-	}, {
-		/* sentinel */
-	}
-};
-MODULE_DEVICE_TABLE(platform, mxcnd_devtype);
-
-#ifdef CONFIG_OF
-static const struct of_device_id mxcnd_dt_ids[] = {
-	{
-		.compatible = "fsl,imx21-nand",
-		.data = &imx21_nand_devtype_data,
-	}, {
-		.compatible = "fsl,imx27-nand",
-		.data = &imx27_nand_devtype_data,
-	}, {
-		.compatible = "fsl,imx25-nand",
-		.data = &imx25_nand_devtype_data,
-	}, {
-		.compatible = "fsl,imx51-nand",
-		.data = &imx51_nand_devtype_data,
-	}, {
-		.compatible = "fsl,imx53-nand",
-		.data = &imx53_nand_devtype_data,
-	},
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxcnd_dt_ids);
-
-static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
-{
-	struct device_node *np = host->dev->of_node;
-	const struct of_device_id *of_id =
-		of_match_device(mxcnd_dt_ids, host->dev);
-
-	if (!np)
-		return 1;
-
-	host->devtype_data = of_id->data;
-
-	return 0;
-}
-#else
-static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
-{
-	return 1;
-}
-#endif
-
-static int mxcnd_probe(struct platform_device *pdev)
-{
-	struct nand_chip *this;
-	struct mtd_info *mtd;
-	struct mxc_nand_host *host;
-	struct resource *res;
-	int err = 0;
-
-	/* Allocate memory for MTD device structure and private data */
-	host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host),
-			GFP_KERNEL);
-	if (!host)
-		return -ENOMEM;
-
-	/* allocate a temporary buffer for the nand_scan_ident() */
-	host->data_buf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL);
-	if (!host->data_buf)
-		return -ENOMEM;
-
-	host->dev = &pdev->dev;
-	/* structures must be linked */
-	this = &host->nand;
-	mtd = nand_to_mtd(this);
-	mtd->dev.parent = &pdev->dev;
-	mtd->name = DRIVER_NAME;
-
-	/* 50 us command delay time */
-	this->chip_delay = 5;
-
-	nand_set_controller_data(this, host);
-	nand_set_flash_node(this, pdev->dev.of_node),
-	this->dev_ready = mxc_nand_dev_ready;
-	this->cmdfunc = mxc_nand_command;
-	this->read_byte = mxc_nand_read_byte;
-	this->read_word = mxc_nand_read_word;
-	this->write_buf = mxc_nand_write_buf;
-	this->read_buf = mxc_nand_read_buf;
-	this->onfi_set_features = mxc_nand_onfi_set_features;
-	this->onfi_get_features = mxc_nand_onfi_get_features;
-
-	host->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(host->clk))
-		return PTR_ERR(host->clk);
-
-	err = mxcnd_probe_dt(host);
-	if (err > 0) {
-		struct mxc_nand_platform_data *pdata =
-					dev_get_platdata(&pdev->dev);
-		if (pdata) {
-			host->pdata = *pdata;
-			host->devtype_data = (struct mxc_nand_devtype_data *)
-						pdev->id_entry->driver_data;
-		} else {
-			err = -ENODEV;
-		}
-	}
-	if (err < 0)
-		return err;
-
-	this->setup_data_interface = host->devtype_data->setup_data_interface;
-
-	if (host->devtype_data->needs_ip) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		host->regs_ip = devm_ioremap_resource(&pdev->dev, res);
-		if (IS_ERR(host->regs_ip))
-			return PTR_ERR(host->regs_ip);
-
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	} else {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	}
-
-	host->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(host->base))
-		return PTR_ERR(host->base);
-
-	host->main_area0 = host->base;
-
-	if (host->devtype_data->regs_offset)
-		host->regs = host->base + host->devtype_data->regs_offset;
-	host->spare0 = host->base + host->devtype_data->spare0_offset;
-	if (host->devtype_data->axi_offset)
-		host->regs_axi = host->base + host->devtype_data->axi_offset;
-
-	this->ecc.bytes = host->devtype_data->eccbytes;
-	host->eccsize = host->devtype_data->eccsize;
-
-	this->select_chip = host->devtype_data->select_chip;
-	this->ecc.size = 512;
-	mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
-
-	if (host->pdata.hw_ecc) {
-		this->ecc.mode = NAND_ECC_HW;
-	} else {
-		this->ecc.mode = NAND_ECC_SOFT;
-		this->ecc.algo = NAND_ECC_HAMMING;
-	}
-
-	/* NAND bus width determines access functions used by upper layer */
-	if (host->pdata.width == 2)
-		this->options |= NAND_BUSWIDTH_16;
-
-	/* update flash based bbt */
-	if (host->pdata.flash_bbt)
-		this->bbt_options |= NAND_BBT_USE_FLASH;
-
-	init_completion(&host->op_completion);
-
-	host->irq = platform_get_irq(pdev, 0);
-	if (host->irq < 0)
-		return host->irq;
-
-	/*
-	 * Use host->devtype_data->irq_control() here instead of irq_control()
-	 * because we must not disable_irq_nosync without having requested the
-	 * irq.
-	 */
-	host->devtype_data->irq_control(host, 0);
-
-	err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
-			0, DRIVER_NAME, host);
-	if (err)
-		return err;
-
-	err = clk_prepare_enable(host->clk);
-	if (err)
-		return err;
-	host->clk_act = 1;
-
-	/*
-	 * Now that we "own" the interrupt make sure the interrupt mask bit is
-	 * cleared on i.MX21. Otherwise we can't read the interrupt status bit
-	 * on this machine.
-	 */
-	if (host->devtype_data->irqpending_quirk) {
-		disable_irq_nosync(host->irq);
-		host->devtype_data->irq_control(host, 1);
-	}
-
-	/* first scan to find the device and get the page size */
-	err = nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL);
-	if (err)
-		goto escan;
-
-	switch (this->ecc.mode) {
-	case NAND_ECC_HW:
-		this->ecc.read_page = mxc_nand_read_page;
-		this->ecc.read_page_raw = mxc_nand_read_page_raw;
-		this->ecc.read_oob = mxc_nand_read_oob;
-		this->ecc.write_page = mxc_nand_write_page_ecc;
-		this->ecc.write_page_raw = mxc_nand_write_page_raw;
-		this->ecc.write_oob = mxc_nand_write_oob;
-		break;
-
-	case NAND_ECC_SOFT:
-		break;
-
-	default:
-		err = -EINVAL;
-		goto escan;
-	}
-
-	if (this->bbt_options & NAND_BBT_USE_FLASH) {
-		this->bbt_td = &bbt_main_descr;
-		this->bbt_md = &bbt_mirror_descr;
-	}
-
-	/* allocate the right size buffer now */
-	devm_kfree(&pdev->dev, (void *)host->data_buf);
-	host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
-					GFP_KERNEL);
-	if (!host->data_buf) {
-		err = -ENOMEM;
-		goto escan;
-	}
-
-	/* Call preset again, with correct writesize this time */
-	host->devtype_data->preset(mtd);
-
-	if (!this->ecc.bytes) {
-		if (host->eccsize == 8)
-			this->ecc.bytes = 18;
-		else if (host->eccsize == 4)
-			this->ecc.bytes = 9;
-	}
-
-	/*
-	 * Experimentation shows that i.MX NFC can only handle up to 218 oob
-	 * bytes. Limit used_oobsize to 218 so as to not confuse copy_spare()
-	 * into copying invalid data to/from the spare IO buffer, as this
-	 * might cause ECC data corruption when doing sub-page write to a
-	 * partially written page.
-	 */
-	host->used_oobsize = min(mtd->oobsize, 218U);
-
-	if (this->ecc.mode == NAND_ECC_HW) {
-		if (is_imx21_nfc(host) || is_imx27_nfc(host))
-			this->ecc.strength = 1;
-		else
-			this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
-	}
-
-	/* second phase scan */
-	err = nand_scan_tail(mtd);
-	if (err)
-		goto escan;
-
-	/* Register the partitions */
-	mtd_device_parse_register(mtd, part_probes,
-			NULL,
-			host->pdata.parts,
-			host->pdata.nr_parts);
-
-	platform_set_drvdata(pdev, host);
-
-	return 0;
-
-escan:
-	if (host->clk_act)
-		clk_disable_unprepare(host->clk);
-
-	return err;
-}
-
-static int mxcnd_remove(struct platform_device *pdev)
-{
-	struct mxc_nand_host *host = platform_get_drvdata(pdev);
-
-	nand_release(nand_to_mtd(&host->nand));
-	if (host->clk_act)
-		clk_disable_unprepare(host->clk);
-
-	return 0;
-}
-
-static struct platform_driver mxcnd_driver = {
-	.driver = {
-		   .name = DRIVER_NAME,
-		   .of_match_table = of_match_ptr(mxcnd_dt_ids),
-	},
-	.id_table = mxcnd_devtype,
-	.probe = mxcnd_probe,
-	.remove = mxcnd_remove,
-};
-module_platform_driver(mxcnd_driver);
-
-MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-MODULE_DESCRIPTION("MXC NAND MTD driver");
-MODULE_LICENSE("GPL");