ice: Support link events, reset and rebuild

Link events are posted to a PF's admin receive queue (ARQ). This patch
adds the ability to detect and process link events.

This patch also adds the ability to process resets.

The driver can process the following resets:
    1) EMP Reset (EMPR)
    2) Global Reset (GLOBR)
    3) Core Reset (CORER)
    4) Physical Function Reset (PFR)

EMPR is the largest level of reset that the driver can handle. An EMPR
resets the manageability block and also the data path, including PHY and
link for all the PFs. The affected PFs are notified of this event through
a miscellaneous interrupt.

GLOBR is a subset of EMPR. It does everything EMPR does except that it
doesn't reset the manageability block.

CORER is a subset of GLOBR. It does everything GLOBR does but doesn't
reset PHY and link.

PFR is a subset of CORER and affects only the given physical function.
In other words, PFR can be thought of as a CORER for a single PF. Since
only the issuing PF is affected, a PFR doesn't result in the miscellaneous
interrupt being triggered.

All the resets have the following in common:
1) Tx/Rx is halted and all queues are stopped.
2) All the VSIs and filters programmed for the PF are lost and have to be
   reprogrammed.
3) Control queue interfaces are reset and have to be reprogrammed.

In the rebuild flow, control queues are reinitialized, VSIs are reallocated
and filters are restored.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 19 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index 348b9cc3c596..ea822a9edce8 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -1009,6 +1009,23 @@ struct ice_aqc_get_link_status_data {
 	__le64 reserved4;
 };
 
+/* Set event mask command (direct 0x0613) */
+struct ice_aqc_set_event_mask {
+	u8	lport_num;
+	u8	reserved[7];
+	__le16	event_mask;
+#define ICE_AQ_LINK_EVENT_UPDOWN		BIT(1)
+#define ICE_AQ_LINK_EVENT_MEDIA_NA		BIT(2)
+#define ICE_AQ_LINK_EVENT_LINK_FAULT		BIT(3)
+#define ICE_AQ_LINK_EVENT_PHY_TEMP_ALARM	BIT(4)
+#define ICE_AQ_LINK_EVENT_EXCESSIVE_ERRORS	BIT(5)
+#define ICE_AQ_LINK_EVENT_SIGNAL_DETECT		BIT(6)
+#define ICE_AQ_LINK_EVENT_AN_COMPLETED		BIT(7)
+#define ICE_AQ_LINK_EVENT_MODULE_QUAL_FAIL	BIT(8)
+#define ICE_AQ_LINK_EVENT_PORT_TX_SUSPENDED	BIT(9)
+	u8	reserved1[6];
+};
+
 /* NVM Read command (indirect 0x0701)
  * NVM Erase commands (direct 0x0702)
  * NVM Update commands (indirect 0x0703)
@@ -1215,6 +1232,7 @@ struct ice_aq_desc {
 		struct ice_aqc_dis_txqs dis_txqs;
 		struct ice_aqc_add_get_update_free_vsi vsi_cmd;
 		struct ice_aqc_alloc_free_res_cmd sw_res_ctrl;
+		struct ice_aqc_set_event_mask set_event_mask;
 		struct ice_aqc_get_link_status get_link_status;
 	} params;
 };
@@ -1294,6 +1312,7 @@ enum ice_adminq_opc {
 	ice_aqc_opc_set_phy_cfg				= 0x0601,
 	ice_aqc_opc_restart_an				= 0x0605,
 	ice_aqc_opc_get_link_status			= 0x0607,
+	ice_aqc_opc_set_event_mask			= 0x0613,
 
 	/* NVM commands */
 	ice_aqc_opc_nvm_read				= 0x0701,