diff options
author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-07-14 22:13:23 -0700 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-11 16:29:28 -0700 |
commit | b47da97728c045a8fd75f36e59ba08cddc8f2292 (patch) | |
tree | 71aa03f391344e9dcec4bee239f6d5c67a0fa361 /drivers/net/ethernet/xscale | |
parent | d9fb9f384292d848ad9db386bcf97f1e06e60264 (diff) | |
download | linux-b47da97728c045a8fd75f36e59ba08cddc8f2292.tar.gz linux-b47da97728c045a8fd75f36e59ba08cddc8f2292.tar.xz |
xscale: Move the Intel XScale IXP drivers
Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
and make the necessary Kconfig and Makefile changes.
CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/xscale')
19 files changed, 4066 insertions, 0 deletions
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig new file mode 100644 index 000000000000..6bbcc54d6ce7 --- /dev/null +++ b/drivers/net/ethernet/xscale/Kconfig @@ -0,0 +1,31 @@ +# +# Intel XScale IXP device configuration +# + +config NET_VENDOR_XSCALE + bool "Intel XScale IXP devices" + depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \ + IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question does not directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about XSacle IXP devices. If you say Y, you will be + asked for your specific card in the following questions. + +if NET_VENDOR_XSCALE + +config IXP4XX_ETH + tristate "Intel IXP4xx Ethernet support" + depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR + select PHYLIB + ---help--- + Say Y here if you want to use built-in Ethernet ports + on IXP4xx processor. + +source "drivers/net/ethernet/xscale/ixp2000/Kconfig" + +endif # NET_VENDOR_XSCALE diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile new file mode 100644 index 000000000000..b195b9d7fe81 --- /dev/null +++ b/drivers/net/ethernet/xscale/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Intel XScale IXP device drivers. +# + +obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/ +obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o diff --git a/drivers/net/ethernet/xscale/ixp2000/Kconfig b/drivers/net/ethernet/xscale/ixp2000/Kconfig new file mode 100644 index 000000000000..58dbc5b876bc --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/Kconfig @@ -0,0 +1,6 @@ +config ENP2611_MSF_NET + tristate "Radisys ENP2611 MSF network interface support" + depends on ARCH_ENP2611 + ---help--- + This is a driver for the MSF network interface unit in + the IXP2400 on the Radisys ENP2611 platform. diff --git a/drivers/net/ethernet/xscale/ixp2000/Makefile b/drivers/net/ethernet/xscale/ixp2000/Makefile new file mode 100644 index 000000000000..fd38351ceaa7 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ENP2611_MSF_NET) += enp2611_mod.o + +enp2611_mod-objs := caleb.o enp2611.o ixp2400-msf.o ixpdev.o pm3386.o diff --git a/drivers/net/ethernet/xscale/ixp2000/caleb.c b/drivers/net/ethernet/xscale/ixp2000/caleb.c new file mode 100644 index 000000000000..7dea5b95012c --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/caleb.c @@ -0,0 +1,136 @@ +/* + * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <asm/io.h> +#include "caleb.h" + +#define CALEB_IDLO 0x00 +#define CALEB_IDHI 0x01 +#define CALEB_RID 0x02 +#define CALEB_RESET 0x03 +#define CALEB_INTREN0 0x04 +#define CALEB_INTREN1 0x05 +#define CALEB_INTRSTAT0 0x06 +#define CALEB_INTRSTAT1 0x07 +#define CALEB_PORTEN 0x08 +#define CALEB_BURST 0x09 +#define CALEB_PORTPAUS 0x0A +#define CALEB_PORTPAUSD 0x0B +#define CALEB_PHY0RX 0x10 +#define CALEB_PHY1RX 0x11 +#define CALEB_PHY0TX 0x12 +#define CALEB_PHY1TX 0x13 +#define CALEB_IXPRX_HI_CNTR 0x15 +#define CALEB_PHY0RX_HI_CNTR 0x16 +#define CALEB_PHY1RX_HI_CNTR 0x17 +#define CALEB_IXPRX_CNTR 0x18 +#define CALEB_PHY0RX_CNTR 0x19 +#define CALEB_PHY1RX_CNTR 0x1A +#define CALEB_IXPTX_CNTR 0x1B +#define CALEB_PHY0TX_CNTR 0x1C +#define CALEB_PHY1TX_CNTR 0x1D +#define CALEB_DEBUG0 0x1E +#define CALEB_DEBUG1 0x1F + + +static u8 caleb_reg_read(int reg) +{ + u8 value; + + value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)); + +// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value); + + return value; +} + +static void caleb_reg_write(int reg, u8 value) +{ + u8 dummy; + +// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value); + + *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value; + + dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE); + __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); +} + + +void caleb_reset(void) +{ + /* + * Perform a chip reset. + */ + caleb_reg_write(CALEB_RESET, 0x02); + udelay(1); + + /* + * Enable all interrupt sources. This is needed to get + * meaningful results out of the status bits (register 6 + * and 7.) + */ + caleb_reg_write(CALEB_INTREN0, 0xff); + caleb_reg_write(CALEB_INTREN1, 0x07); + + /* + * Set RX and TX FIFO thresholds to 1.5kb. + */ + caleb_reg_write(CALEB_PHY0RX, 0x11); + caleb_reg_write(CALEB_PHY1RX, 0x11); + caleb_reg_write(CALEB_PHY0TX, 0x11); + caleb_reg_write(CALEB_PHY1TX, 0x11); + + /* + * Program SPI-3 burst size. + */ + caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets +// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets +// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets +} + +void caleb_enable_rx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp |= 1 << port; + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_disable_rx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp &= ~(1 << port); + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_enable_tx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp |= 1 << (port + 4); + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_disable_tx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp &= ~(1 << (port + 4)); + caleb_reg_write(CALEB_PORTEN, temp); +} diff --git a/drivers/net/ethernet/xscale/ixp2000/caleb.h b/drivers/net/ethernet/xscale/ixp2000/caleb.h new file mode 100644 index 000000000000..e93a1ef5b8a3 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/caleb.h @@ -0,0 +1,22 @@ +/* + * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __CALEB_H +#define __CALEB_H + +void caleb_reset(void); +void caleb_enable_rx(int port); +void caleb_disable_rx(int port); +void caleb_enable_tx(int port); +void caleb_disable_tx(int port); + + +#endif diff --git a/drivers/net/ethernet/xscale/ixp2000/enp2611.c b/drivers/net/ethernet/xscale/ixp2000/enp2611.c new file mode 100644 index 000000000000..34a6cfd17930 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/enp2611.c @@ -0,0 +1,232 @@ +/* + * IXP2400 MSF network device driver for the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <asm/hardware/uengine.h> +#include <asm/mach-types.h> +#include <asm/io.h> +#include "ixpdev.h" +#include "caleb.h" +#include "ixp2400-msf.h" +#include "pm3386.h" + +/*********************************************************************** + * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC + * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA + * to the IXP2400. + * + * +-------------+ + * SFP GBIC #0 ---+ | +---------+ + * | PM3386 #0 +-------+ | + * SFP GBIC #1 ---+ | | "Caleb" | +---------+ + * +-------------+ | | | | + * | SPI-3 +---------+ IXP2400 | + * +-------------+ | bridge | | | + * SFP GBIC #2 ---+ | | FPGA | +---------+ + * | PM3386 #1 +-------+ | + * | | +---------+ + * +-------------+ + * ^ ^ ^ + * | 1.25Gbaud | 104MHz | 104MHz + * | SERDES ea. | SPI-3 ea. | SPI-3 + * + ***********************************************************************/ +static struct ixp2400_msf_parameters enp2611_msf_parameters = +{ + .rx_mode = IXP2400_RX_MODE_UTOPIA_POS | + IXP2400_RX_MODE_1x32 | + IXP2400_RX_MODE_MPHY | + IXP2400_RX_MODE_MPHY_32 | + IXP2400_RX_MODE_MPHY_POLLED_STATUS | + IXP2400_RX_MODE_MPHY_LEVEL3 | + IXP2400_RX_MODE_RBUF_SIZE_64, + + .rxclk01_multiplier = IXP2400_PLL_MULTIPLIER_16, + + .rx_poll_ports = 3, + + .rx_channel_mode = { + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE + }, + + .tx_mode = IXP2400_TX_MODE_UTOPIA_POS | + IXP2400_TX_MODE_1x32 | + IXP2400_TX_MODE_MPHY | + IXP2400_TX_MODE_MPHY_32 | + IXP2400_TX_MODE_MPHY_POLLED_STATUS | + IXP2400_TX_MODE_MPHY_LEVEL3 | + IXP2400_TX_MODE_TBUF_SIZE_64, + + .txclk01_multiplier = IXP2400_PLL_MULTIPLIER_16, + + .tx_poll_ports = 3, + + .tx_channel_mode = { + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE + } +}; + +static struct net_device *nds[3]; +static struct timer_list link_check_timer; + +/* @@@ Poll the SFP moddef0 line too. */ +/* @@@ Try to use the pm3386 DOOL interrupt as well. */ +static void enp2611_check_link_status(unsigned long __dummy) +{ + int i; + + for (i = 0; i < 3; i++) { + struct net_device *dev; + int status; + + dev = nds[i]; + if (dev == NULL) + continue; + + status = pm3386_is_link_up(i); + if (status && !netif_carrier_ok(dev)) { + /* @@@ Should report autonegotiation status. */ + printk(KERN_INFO "%s: NIC Link is Up\n", dev->name); + + pm3386_enable_tx(i); + caleb_enable_tx(i); + netif_carrier_on(dev); + } else if (!status && netif_carrier_ok(dev)) { + printk(KERN_INFO "%s: NIC Link is Down\n", dev->name); + + netif_carrier_off(dev); + caleb_disable_tx(i); + pm3386_disable_tx(i); + } + } + + link_check_timer.expires = jiffies + HZ / 10; + add_timer(&link_check_timer); +} + +static void enp2611_set_port_admin_status(int port, int up) +{ + if (up) { + caleb_enable_rx(port); + + pm3386_set_carrier(port, 1); + pm3386_enable_rx(port); + } else { + caleb_disable_tx(port); + pm3386_disable_tx(port); + /* @@@ Flush out pending packets. */ + pm3386_set_carrier(port, 0); + + pm3386_disable_rx(port); + caleb_disable_rx(port); + } +} + +static int __init enp2611_init_module(void) +{ + int ports; + int i; + + if (!machine_is_enp2611()) + return -ENODEV; + + caleb_reset(); + pm3386_reset(); + + ports = pm3386_port_count(); + for (i = 0; i < ports; i++) { + nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv)); + if (nds[i] == NULL) { + while (--i >= 0) + free_netdev(nds[i]); + return -ENOMEM; + } + + pm3386_init_port(i); + pm3386_get_mac(i, nds[i]->dev_addr); + } + + ixp2400_msf_init(&enp2611_msf_parameters); + + if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) { + for (i = 0; i < ports; i++) + if (nds[i]) + free_netdev(nds[i]); + return -EINVAL; + } + + init_timer(&link_check_timer); + link_check_timer.function = enp2611_check_link_status; + link_check_timer.expires = jiffies; + add_timer(&link_check_timer); + + return 0; +} + +static void __exit enp2611_cleanup_module(void) +{ + int i; + + del_timer_sync(&link_check_timer); + + ixpdev_deinit(); + for (i = 0; i < 3; i++) + free_netdev(nds[i]); +} + +module_init(enp2611_init_module); +module_exit(enp2611_cleanup_module); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c new file mode 100644 index 000000000000..f5ffd7e05d26 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c @@ -0,0 +1,212 @@ +/* + * Generic library functions for the MSF (Media and Switch Fabric) unit + * found on the Intel IXP2400 network processor. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <mach/hardware.h> +#include <mach/ixp2000-regs.h> +#include <asm/delay.h> +#include <asm/io.h> +#include "ixp2400-msf.h" + +/* + * This is the Intel recommended PLL init procedure as described on + * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual. + */ +static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp) +{ + int rx_dual_clock; + int tx_dual_clock; + u32 value; + + /* + * If the RX mode is not 1x32, we have to enable both RX PLLs + * (#0 and #1.) The same thing for the TX direction. + */ + rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK); + tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK); + + /* + * Read initial value. + */ + value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL); + + /* + * Put PLLs in powerdown and bypass mode. + */ + value |= 0x0000f0f0; + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Set single or dual clock mode bits. + */ + value &= ~0x03000000; + value |= (rx_dual_clock << 24) | (tx_dual_clock << 25); + + /* + * Set multipliers. + */ + value &= ~0x00ff0000; + value |= mp->rxclk01_multiplier << 16; + value |= mp->rxclk23_multiplier << 18; + value |= mp->txclk01_multiplier << 20; + value |= mp->txclk23_multiplier << 22; + + /* + * And write value. + */ + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Disable PLL bypass mode. + */ + value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15); + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Turn on PLLs. + */ + value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7); + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Wait for PLLs to lock. There are lock status bits, but IXP2400 + * erratum #65 says that these lock bits should not be relied upon + * as they might not accurately reflect the true state of the PLLs. + */ + udelay(100); +} + +/* + * Needed according to p480 of Programmer's Reference Manual. + */ +static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp) +{ + int size_bits; + int i; + + /* + * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer + * corruption) in the Intel-recommended way: do not add the RBUF + * elements susceptible to corruption to the freelist. + */ + size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK; + if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) { + for (i = 1; i < 128; i++) { + if (i == 9 || i == 18 || i == 27) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) { + for (i = 1; i < 64; i++) { + if (i == 4 || i == 9 || i == 13) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) { + for (i = 1; i < 32; i++) { + if (i == 2 || i == 4 || i == 6) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } +} + +static u32 ixp2400_msf_valid_channels(u32 reg) +{ + u32 channels; + + channels = 0; + switch (reg & IXP2400_RX_MODE_WIDTH_MASK) { + case IXP2400_RX_MODE_1x32: + channels = 0x1; + if (reg & IXP2400_RX_MODE_MPHY && + !(reg & IXP2400_RX_MODE_MPHY_32)) + channels = 0xf; + break; + + case IXP2400_RX_MODE_2x16: + channels = 0x5; + break; + + case IXP2400_RX_MODE_4x8: + channels = 0xf; + break; + + case IXP2400_RX_MODE_1x16_2x8: + channels = 0xd; + break; + } + + return channels; +} + +static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp) +{ + u32 value; + + value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff; + value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28; + ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value); +} + +static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp) +{ + u32 value; + + value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff; + value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28; + ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value); +} + + +void ixp2400_msf_init(struct ixp2400_msf_parameters *mp) +{ + u32 value; + int i; + + /* + * Init the RX/TX PLLs based on the passed parameter block. + */ + ixp2400_pll_init(mp); + + /* + * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF. + */ + value = ixp2000_reg_read(IXP2000_RESET0); + ixp2000_reg_write(IXP2000_RESET0, value | 0x80); + ixp2000_reg_write(IXP2000_RESET0, value & ~0x80); + + /* + * Initialise the RX section. + */ + ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1); + ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode); + for (i = 0; i < 4; i++) { + ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i, + mp->rx_channel_mode[i]); + } + ixp2400_msf_free_rbuf_entries(mp); + ixp2400_msf_enable_rx(mp); + + /* + * Initialise the TX section. + */ + ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1); + ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode); + for (i = 0; i < 4; i++) { + ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i, + mp->tx_channel_mode[i]); + } + ixp2400_msf_enable_tx(mp); +} diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h new file mode 100644 index 000000000000..3ac1af2771da --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h @@ -0,0 +1,115 @@ +/* + * Generic library functions for the MSF (Media and Switch Fabric) unit + * found on the Intel IXP2400 network processor. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#ifndef __IXP2400_MSF_H +#define __IXP2400_MSF_H + +struct ixp2400_msf_parameters +{ + u32 rx_mode; + unsigned rxclk01_multiplier:2; + unsigned rxclk23_multiplier:2; + unsigned rx_poll_ports:6; + u32 rx_channel_mode[4]; + + u32 tx_mode; + unsigned txclk01_multiplier:2; + unsigned txclk23_multiplier:2; + unsigned tx_poll_ports:6; + u32 tx_channel_mode[4]; +}; + +void ixp2400_msf_init(struct ixp2400_msf_parameters *mp); + +#define IXP2400_PLL_MULTIPLIER_48 0x00 +#define IXP2400_PLL_MULTIPLIER_24 0x01 +#define IXP2400_PLL_MULTIPLIER_16 0x02 +#define IXP2400_PLL_MULTIPLIER_12 0x03 + +#define IXP2400_RX_MODE_CSIX 0x00400000 +#define IXP2400_RX_MODE_UTOPIA_POS 0x00000000 +#define IXP2400_RX_MODE_WIDTH_MASK 0x00300000 +#define IXP2400_RX_MODE_1x16_2x8 0x00300000 +#define IXP2400_RX_MODE_4x8 0x00200000 +#define IXP2400_RX_MODE_2x16 0x00100000 +#define IXP2400_RX_MODE_1x32 0x00000000 +#define IXP2400_RX_MODE_MPHY 0x00080000 +#define IXP2400_RX_MODE_SPHY 0x00000000 +#define IXP2400_RX_MODE_MPHY_32 0x00040000 +#define IXP2400_RX_MODE_MPHY_4 0x00000000 +#define IXP2400_RX_MODE_MPHY_POLLED_STATUS 0x00020000 +#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS 0x00000000 +#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX 0x00010000 +#define IXP2400_RX_MODE_CBUS_SIMPLEX 0x00000000 +#define IXP2400_RX_MODE_MPHY_LEVEL2 0x00004000 +#define IXP2400_RX_MODE_MPHY_LEVEL3 0x00000000 +#define IXP2400_RX_MODE_CBUS_8BIT 0x00002000 +#define IXP2400_RX_MODE_CBUS_4BIT 0x00000000 +#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST 0x00000200 +#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS 0x00000000 +#define IXP2400_RX_MODE_RBUF_SIZE_MASK 0x0000000c +#define IXP2400_RX_MODE_RBUF_SIZE_256 0x00000008 +#define IXP2400_RX_MODE_RBUF_SIZE_128 0x00000004 +#define IXP2400_RX_MODE_RBUF_SIZE_64 0x00000000 + +#define IXP2400_PORT_RX_MODE_SLAVE 0x00000040 +#define IXP2400_PORT_RX_MODE_MASTER 0x00000000 +#define IXP2400_PORT_RX_MODE_POS_PHY_L3 0x00000020 +#define IXP2400_PORT_RX_MODE_POS_PHY_L2 0x00000000 +#define IXP2400_PORT_RX_MODE_POS_PHY 0x00000010 +#define IXP2400_PORT_RX_MODE_UTOPIA 0x00000000 +#define IXP2400_PORT_RX_MODE_EVEN_PARITY 0x0000000c +#define IXP2400_PORT_RX_MODE_ODD_PARITY 0x00000008 +#define IXP2400_PORT_RX_MODE_NO_PARITY 0x00000000 +#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS 0x00000002 +#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS 0x00000000 +#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE 0x00000001 +#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE 0x00000000 + +#define IXP2400_TX_MODE_CSIX 0x00400000 +#define IXP2400_TX_MODE_UTOPIA_POS 0x00000000 +#define IXP2400_TX_MODE_WIDTH_MASK 0x00300000 +#define IXP2400_TX_MODE_1x16_2x8 0x00300000 +#define IXP2400_TX_MODE_4x8 0x00200000 +#define IXP2400_TX_MODE_2x16 0x00100000 +#define IXP2400_TX_MODE_1x32 0x00000000 +#define IXP2400_TX_MODE_MPHY 0x00080000 +#define IXP2400_TX_MODE_SPHY 0x00000000 +#define IXP2400_TX_MODE_MPHY_32 0x00040000 +#define IXP2400_TX_MODE_MPHY_4 0x00000000 +#define IXP2400_TX_MODE_MPHY_POLLED_STATUS 0x00020000 +#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS 0x00000000 +#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX 0x00010000 +#define IXP2400_TX_MODE_CBUS_SIMPLEX 0x00000000 +#define IXP2400_TX_MODE_MPHY_LEVEL2 0x00004000 +#define IXP2400_TX_MODE_MPHY_LEVEL3 0x00000000 +#define IXP2400_TX_MODE_CBUS_8BIT 0x00002000 +#define IXP2400_TX_MODE_CBUS_4BIT 0x00000000 +#define IXP2400_TX_MODE_TBUF_SIZE_MASK 0x0000000c +#define IXP2400_TX_MODE_TBUF_SIZE_256 0x00000008 +#define IXP2400_TX_MODE_TBUF_SIZE_128 0x00000004 +#define IXP2400_TX_MODE_TBUF_SIZE_64 0x00000000 + +#define IXP2400_PORT_TX_MODE_SLAVE 0x00000040 +#define IXP2400_PORT_TX_MODE_MASTER 0x00000000 +#define IXP2400_PORT_TX_MODE_POS_PHY 0x00000010 +#define IXP2400_PORT_TX_MODE_UTOPIA 0x00000000 +#define IXP2400_PORT_TX_MODE_EVEN_PARITY 0x0000000c +#define IXP2400_PORT_TX_MODE_ODD_PARITY 0x00000008 +#define IXP2400_PORT_TX_MODE_NO_PARITY 0x00000000 +#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS 0x00000002 +#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE 0x00000001 +#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE 0x00000000 + + +#endif diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc new file mode 100644 index 000000000000..42a73e357afa --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc @@ -0,0 +1,408 @@ +/* + * RX ucode for the Intel IXP2400 in POS-PHY mode. + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Assumptions made in this code: + * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where + * only one full element list is used. This includes, for example, + * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This + * is not an exhaustive list.) + * - The RBUF uses 64-byte mpackets. + * - RX descriptors reside in SRAM, and have the following format: + * struct rx_desc + * { + * // to uengine + * u32 buf_phys_addr; + * u32 buf_length; + * + * // from uengine + * u32 channel; + * u32 pkt_length; + * }; + * - Packet data resides in DRAM. + * - Packet buffer addresses are 8-byte aligned. + * - Scratch ring 0 is rx_pending. + * - Scratch ring 1 is rx_done, and has status condition 'full'. + * - The host triggers rx_done flush and rx_pending refill on seeing INTA. + * - This code is run on all eight threads of the microengine it runs on. + * + * Local memory is used for per-channel RX state. + */ + +#define RX_THREAD_FREELIST_0 0x0030 +#define RBUF_ELEMENT_DONE 0x0044 + +#define CHANNEL_FLAGS *l$index0[0] +#define CHANNEL_FLAG_RECEIVING 1 +#define PACKET_LENGTH *l$index0[1] +#define PACKET_CHECKSUM *l$index0[2] +#define BUFFER_HANDLE *l$index0[3] +#define BUFFER_START *l$index0[4] +#define BUFFER_LENGTH *l$index0[5] + +#define CHANNEL_STATE_SIZE 24 // in bytes +#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size)) + + + .sig volatile sig1 + .sig volatile sig2 + .sig volatile sig3 + + .sig mpacket_arrived + .reg add_to_rx_freelist + .reg read $rsw0, $rsw1 + .xfer_order $rsw0 $rsw1 + + .reg zero + + /* + * Initialise add_to_rx_freelist. + */ + .begin + .reg temp + .reg temp2 + + immed[add_to_rx_freelist, RX_THREAD_FREELIST_0] + immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))] + + local_csr_rd[ACTIVE_CTX_STS] + immed[temp, 0] + alu[temp2, temp, and, 0x1f] + alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20] + alu[temp2, temp, and, 0x80] + alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18] + .end + + immed[zero, 0] + + /* + * Skip context 0 initialisation? + */ + .begin + br!=ctx[0, mpacket_receive_loop#] + .end + + /* + * Initialise local memory. + */ + .begin + .reg addr + .reg temp + + immed[temp, 0] + init_local_mem_loop#: + alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT] + local_csr_wr[ACTIVE_LM_ADDR_0, addr] + nop + nop + nop + + immed[CHANNEL_FLAGS, 0] + + alu[temp, temp, +, 1] + alu[--, temp, and, 0x20] + beq[init_local_mem_loop#] + .end + + /* + * Initialise signal pipeline. + */ + .begin + local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)] + .set_sig sig1 + + local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)] + .set_sig sig2 + + local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)] + .set_sig sig3 + .end + +mpacket_receive_loop#: + /* + * Synchronise and wait for mpacket. + */ + .begin + ctx_arb[sig1] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))] + + msf[fast_wr, --, add_to_rx_freelist, 0] + .set_sig mpacket_arrived + ctx_arb[mpacket_arrived] + .set $rsw0 $rsw1 + .end + + /* + * We halt if we see {inbparerr,parerr,null,soperror}. + */ + .begin + alu_shf[--, 0x1b, and, $rsw0, >>8] + bne[abort_rswerr#] + .end + + /* + * Point local memory pointer to this channel's state area. + */ + .begin + .reg chanaddr + + alu[chanaddr, $rsw0, and, 0x1f] + alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT] + local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr] + nop + nop + nop + .end + + /* + * Check whether we received a SOP mpacket while we were already + * working on a packet, or a non-SOP mpacket while there was no + * packet pending. (SOP == RECEIVING -> abort) If everything's + * okay, update the RECEIVING flag to reflect our new state. + */ + .begin + .reg temp + .reg eop + + #if CHANNEL_FLAG_RECEIVING != 1 + #error CHANNEL_FLAG_RECEIVING is not 1 + #endif + + alu_shf[temp, 1, and, $rsw0, >>15] + alu[temp, temp, xor, CHANNEL_FLAGS] + alu[--, temp, and, CHANNEL_FLAG_RECEIVING] + beq[abort_proterr#] + + alu_shf[eop, 1, and, $rsw0, >>14] + alu[CHANNEL_FLAGS, temp, xor, eop] + .end + + /* + * Copy the mpacket into the right spot, and in case of EOP, + * write back the descriptor and pass the packet on. + */ + .begin + .reg buffer_offset + .reg _packet_length + .reg _packet_checksum + .reg _buffer_handle + .reg _buffer_start + .reg _buffer_length + + /* + * Determine buffer_offset, _packet_length and + * _packet_checksum. + */ + .begin + .reg temp + + alu[--, 1, and, $rsw0, >>15] + beq[not_sop#] + + immed[PACKET_LENGTH, 0] + immed[PACKET_CHECKSUM, 0] + + not_sop#: + alu[buffer_offset, --, b, PACKET_LENGTH] + alu_shf[temp, 0xff, and, $rsw0, >>16] + alu[_packet_length, buffer_offset, +, temp] + alu[PACKET_LENGTH, --, b, _packet_length] + + immed[temp, 0xffff] + alu[temp, $rsw1, and, temp] + alu[_packet_checksum, PACKET_CHECKSUM, +, temp] + alu[PACKET_CHECKSUM, --, b, _packet_checksum] + .end + + /* + * Allocate buffer in case of SOP. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>15] + beq[skip_buffer_alloc#] + + .begin + .sig zzz + .reg read $stemp $stemp2 + .xfer_order $stemp $stemp2 + + rx_nobufs#: + scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz] + alu[_buffer_handle, --, b, $stemp] + beq[rx_nobufs#] + + sram[read, $stemp, _buffer_handle, 0, 2], + ctx_swap[zzz] + alu[_buffer_start, --, b, $stemp] + alu[_buffer_length, --, b, $stemp2] + .end + + skip_buffer_alloc#: + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig2] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] + .end + + /* + * Synchronise buffer state. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>15] + beq[copy_from_local_mem#] + + alu[BUFFER_HANDLE, --, b, _buffer_handle] + alu[BUFFER_START, --, b, _buffer_start] + alu[BUFFER_LENGTH, --, b, _buffer_length] + br[sync_state_done#] + + copy_from_local_mem#: + alu[_buffer_handle, --, b, BUFFER_HANDLE] + alu[_buffer_start, --, b, BUFFER_START] + alu[_buffer_length, --, b, BUFFER_LENGTH] + + sync_state_done#: + .end + +#if 0 + /* + * Debug buffer state management. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>14] + beq[no_poison#] + immed[BUFFER_HANDLE, 0xdead] + immed[BUFFER_START, 0xdead] + immed[BUFFER_LENGTH, 0xdead] + no_poison#: + + immed[temp, 0xdead] + alu[--, _buffer_handle, -, temp] + beq[state_corrupted#] + alu[--, _buffer_start, -, temp] + beq[state_corrupted#] + alu[--, _buffer_length, -, temp] + beq[state_corrupted#] + .end +#endif + + /* + * Check buffer length. + */ + .begin + alu[--, _buffer_length, -, _packet_length] + blo[buffer_overflow#] + .end + + /* + * Copy the mpacket and give back the RBUF element. + */ + .begin + .reg element + .reg xfer_size + .reg temp + .sig copy_sig + + alu_shf[element, 0x7f, and, $rsw0, >>24] + alu_shf[xfer_size, 0xff, and, $rsw0, >>16] + + alu[xfer_size, xfer_size, -, 1] + alu_shf[xfer_size, 0x10, or, xfer_size, >>3] + alu_shf[temp, 0x10, or, xfer_size, <<21] + alu_shf[temp, temp, or, element, <<11] + alu_shf[--, temp, or, 1, <<18] + + dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8], + indirect_ref, sig_done[copy_sig] + ctx_arb[copy_sig] + + alu[temp, RBUF_ELEMENT_DONE, or, element, <<16] + msf[fast_wr, --, temp, 0] + .end + + /* + * If EOP, write back the packet descriptor. + */ + .begin + .reg write $stemp $stemp2 + .xfer_order $stemp $stemp2 + .sig zzz + + alu_shf[--, 1, and, $rsw0, >>14] + beq[no_writeback#] + + alu[$stemp, $rsw0, and, 0x1f] + alu[$stemp2, --, b, _packet_length] + sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz] + + no_writeback#: + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig3] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] + .end + + /* + * If EOP, put the buffer back onto the scratch ring. + */ + .begin + .reg write $stemp + .sig zzz + + br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#] + + alu_shf[--, 1, and, $rsw0, >>14] + beq[mpacket_receive_loop#] + + alu[--, 1, and, $rsw0, >>10] + bne[rxerr#] + + alu[$stemp, --, b, _buffer_handle] + scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz] + cap[fast_wr, 0, XSCALE_INT_A] + br[mpacket_receive_loop#] + + rxerr#: + alu[$stemp, --, b, _buffer_handle] + scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz] + br[mpacket_receive_loop#] + .end + .end + + +abort_rswerr#: + halt + +abort_proterr#: + halt + +state_corrupted#: + halt + +buffer_overflow#: + halt + +rx_done_ring_overflow#: + halt + + diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode new file mode 100644 index 000000000000..e8aee2f81aad --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode @@ -0,0 +1,130 @@ +static struct ixp2000_uengine_code ixp2400_rx = +{ + .cpu_model_bitmask = 0x000003fe, + .cpu_min_revision = 0, + .cpu_max_revision = 255, + + .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS | + IXP2000_UENGINE_PRN_UPDATE_EVERY | + IXP2000_UENGINE_NN_FROM_PREVIOUS | + IXP2000_UENGINE_ASSERT_EMPTY_AT_0 | + IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT | + IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT, + + .initial_reg_values = (struct ixp2000_reg_value []) { + { -1, -1 } + }, + + .num_insns = 109, + .insns = (u8 []) { + 0xf0, 0x00, 0x0c, 0xc0, 0x05, + 0xf4, 0x44, 0x0c, 0x00, 0x05, + 0xfc, 0x04, 0x4c, 0x00, 0x00, + 0xf0, 0x00, 0x00, 0x3b, 0x00, + 0xb4, 0x40, 0xf0, 0x3b, 0x1f, + 0x8a, 0xc0, 0x50, 0x3e, 0x05, + 0xb4, 0x40, 0xf0, 0x3b, 0x80, + 0x9a, 0xe0, 0x00, 0x3e, 0x05, + 0xf0, 0x00, 0x00, 0x07, 0x00, + 0xd8, 0x05, 0xc0, 0x00, 0x11, + 0xf0, 0x00, 0x00, 0x0f, 0x00, + 0x91, 0xb0, 0x20, 0x0e, 0x00, + 0xfc, 0x06, 0x60, 0x0b, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x02, 0x00, + 0xb0, 0xc0, 0x30, 0x0f, 0x01, + 0xa4, 0x70, 0x00, 0x0f, 0x20, + 0xd8, 0x02, 0xc0, 0x01, 0x00, + 0xfc, 0x10, 0xac, 0x23, 0x08, + 0xfc, 0x10, 0xac, 0x43, 0x10, + 0xfc, 0x10, 0xac, 0x63, 0x18, + 0xe0, 0x00, 0x00, 0x00, 0x02, + 0xfc, 0x10, 0xae, 0x23, 0x88, + 0x3d, 0x00, 0x04, 0x03, 0x20, + 0xe0, 0x00, 0x00, 0x00, 0x10, + 0x84, 0x82, 0x02, 0x01, 0x3b, + 0xd8, 0x1a, 0x00, 0x01, 0x01, + 0xb4, 0x00, 0x8c, 0x7d, 0x80, + 0x91, 0xb0, 0x80, 0x22, 0x00, + 0xfc, 0x06, 0x60, 0x23, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0x94, 0xf0, 0x92, 0x01, 0x21, + 0xac, 0x40, 0x60, 0x26, 0x00, + 0xa4, 0x30, 0x0c, 0x04, 0x06, + 0xd8, 0x1a, 0x40, 0x01, 0x00, + 0x94, 0xe0, 0xa2, 0x01, 0x21, + 0xac, 0x20, 0x00, 0x28, 0x06, + 0x84, 0xf2, 0x02, 0x01, 0x21, + 0xd8, 0x0b, 0x40, 0x01, 0x00, + 0xf0, 0x00, 0x0c, 0x02, 0x01, + 0xf0, 0x00, 0x0c, 0x02, 0x02, + 0xa0, 0x00, 0x08, 0x04, 0x00, + 0x95, 0x00, 0xc6, 0x01, 0xff, + 0xa0, 0x80, 0x10, 0x30, 0x00, + 0xa0, 0x60, 0x1c, 0x00, 0x01, + 0xf0, 0x0f, 0xf0, 0x33, 0xff, + 0xb4, 0x00, 0xc0, 0x31, 0x81, + 0xb0, 0x80, 0xb0, 0x32, 0x02, + 0xa0, 0x20, 0x20, 0x2c, 0x00, + 0x94, 0xf0, 0xd2, 0x01, 0x21, + 0xd8, 0x0f, 0x40, 0x01, 0x00, + 0x19, 0x40, 0x10, 0x04, 0x20, + 0xa0, 0x00, 0x26, 0x04, 0x00, + 0xd8, 0x0d, 0xc0, 0x01, 0x00, + 0x00, 0x42, 0x10, 0x80, 0x02, + 0xb0, 0x00, 0x46, 0x04, 0x00, + 0xb0, 0x00, 0x56, 0x08, 0x00, + 0xe0, 0x00, 0x00, 0x00, 0x04, + 0xfc, 0x10, 0xae, 0x43, 0x90, + 0x84, 0xf0, 0x32, 0x01, 0x21, + 0xd8, 0x11, 0x40, 0x01, 0x00, + 0xa0, 0x60, 0x3c, 0x00, 0x02, + 0xa0, 0x20, 0x40, 0x10, 0x00, + 0xa0, 0x20, 0x50, 0x14, 0x00, + 0xd8, 0x12, 0x00, 0x00, 0x18, + 0xa0, 0x00, 0x28, 0x0c, 0x00, + 0xb0, 0x00, 0x48, 0x10, 0x00, + 0xb0, 0x00, 0x58, 0x14, 0x00, + 0xaa, 0xf0, 0x00, 0x14, 0x01, + 0xd8, 0x1a, 0xc0, 0x01, 0x05, + 0x85, 0x80, 0x42, 0x01, 0xff, + 0x95, 0x00, 0x66, 0x01, 0xff, + 0xba, 0xc0, 0x60, 0x1b, 0x01, + 0x9a, 0x30, 0x60, 0x19, 0x30, + 0x9a, 0xb0, 0x70, 0x1a, 0x30, + 0x9b, 0x50, 0x78, 0x1e, 0x04, + 0x8a, 0xe2, 0x08, 0x1e, 0x21, + 0x6a, 0x4e, 0x00, 0x13, 0x00, + 0xe0, 0x00, 0x00, 0x00, 0x30, + 0x9b, 0x00, 0x7a, 0x92, 0x04, + 0x3d, 0x00, 0x04, 0x1f, 0x20, + 0x84, 0xe2, 0x02, 0x01, 0x21, + 0xd8, 0x16, 0x80, 0x01, 0x00, + 0xa4, 0x18, 0x0c, 0x7d, 0x80, + 0xa0, 0x58, 0x1c, 0x00, 0x01, + 0x01, 0x42, 0x00, 0xa0, 0x02, + 0xe0, 0x00, 0x00, 0x00, 0x08, + 0xfc, 0x10, 0xae, 0x63, 0x98, + 0xd8, 0x1b, 0x00, 0xc2, 0x14, + 0x84, 0xe2, 0x02, 0x01, 0x21, + 0xd8, 0x05, 0xc0, 0x01, 0x00, + 0x84, 0xa2, 0x02, 0x01, 0x21, + 0xd8, 0x19, 0x40, 0x01, 0x01, + 0xa0, 0x58, 0x0c, 0x00, 0x02, + 0x1a, 0x40, 0x00, 0x04, 0x24, + 0x33, 0x00, 0x01, 0x2f, 0x20, + 0xd8, 0x05, 0xc0, 0x00, 0x18, + 0xa0, 0x58, 0x0c, 0x00, 0x02, + 0x1a, 0x40, 0x00, 0x04, 0x20, + 0xd8, 0x05, 0xc0, 0x00, 0x18, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + } +}; diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc new file mode 100644 index 000000000000..d090d1884fb7 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc @@ -0,0 +1,272 @@ +/* + * TX ucode for the Intel IXP2400 in POS-PHY mode. + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Assumptions made in this code: + * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where + * only one TBUF partition is used. This includes, for example, + * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This + * is not an exhaustive list.) + * - The TBUF uses 64-byte mpackets. + * - TX descriptors reside in SRAM, and have the following format: + * struct tx_desc + * { + * // to uengine + * u32 buf_phys_addr; + * u32 pkt_length; + * u32 channel; + * }; + * - Packet data resides in DRAM. + * - Packet buffer addresses are 8-byte aligned. + * - Scratch ring 2 is tx_pending. + * - Scratch ring 3 is tx_done, and has status condition 'full'. + * - This code is run on all eight threads of the microengine it runs on. + */ + +#define TX_SEQUENCE_0 0x0060 +#define TBUF_CTRL 0x1800 + +#define PARTITION_SIZE 128 +#define PARTITION_THRESH 96 + + + .sig volatile sig1 + .sig volatile sig2 + .sig volatile sig3 + + .reg @old_tx_seq_0 + .reg @mpkts_in_flight + .reg @next_tbuf_mpacket + + .reg @buffer_handle + .reg @buffer_start + .reg @packet_length + .reg @channel + .reg @packet_offset + + .reg zero + + immed[zero, 0] + + /* + * Skip context 0 initialisation? + */ + .begin + br!=ctx[0, mpacket_tx_loop#] + .end + + /* + * Wait until all pending TBUF elements have been transmitted. + */ + .begin + .reg read $tx + .sig zzz + + loop_empty#: + msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] + alu_shf[--, --, b, $tx, >>31] + beq[loop_empty#] + + alu[@old_tx_seq_0, --, b, $tx] + .end + + immed[@mpkts_in_flight, 0] + alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)] + + immed[@buffer_handle, 0] + + /* + * Initialise signal pipeline. + */ + .begin + local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)] + .set_sig sig1 + + local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)] + .set_sig sig2 + + local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)] + .set_sig sig3 + .end + +mpacket_tx_loop#: + .begin + .reg tbuf_element_index + .reg buffer_handle + .reg sop_eop + .reg packet_data + .reg channel + .reg mpacket_size + + /* + * If there is no packet currently being transmitted, + * dequeue the next TX descriptor, and fetch the buffer + * address, packet length and destination channel number. + */ + .begin + .reg read $stemp $stemp2 $stemp3 + .xfer_order $stemp $stemp2 $stemp3 + .sig zzz + + ctx_arb[sig1] + + alu[--, --, b, @buffer_handle] + bne[already_got_packet#] + + tx_nobufs#: + scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz] + alu[@buffer_handle, --, b, $stemp] + beq[tx_nobufs#] + + sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz] + alu[@buffer_start, --, b, $stemp] + alu[@packet_length, --, b, $stemp2] + beq[zero_byte_packet#] + alu[@channel, --, b, $stemp3] + immed[@packet_offset, 0] + + already_got_packet#: + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))] + .end + + /* + * Determine tbuf element index, SOP/EOP flags, mpacket + * offset and mpacket size and cache buffer_handle and + * channel number. + */ + .begin + alu[tbuf_element_index, --, b, @next_tbuf_mpacket] + alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1] + alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and, + (PARTITION_SIZE - 1)] + + alu[buffer_handle, --, b, @buffer_handle] + immed[@buffer_handle, 0] + + immed[sop_eop, 1] + + alu[packet_data, --, b, @packet_offset] + bne[no_sop#] + alu[sop_eop, sop_eop, or, 2] + no_sop#: + alu[packet_data, packet_data, +, @buffer_start] + + alu[channel, --, b, @channel] + + alu[mpacket_size, @packet_length, -, @packet_offset] + alu[--, 64, -, mpacket_size] + bhs[eop#] + alu[@buffer_handle, --, b, buffer_handle] + immed[mpacket_size, 64] + alu[sop_eop, sop_eop, and, 2] + eop#: + + alu[@packet_offset, @packet_offset, +, mpacket_size] + .end + + /* + * Wait until there's enough space in the TBUF. + */ + .begin + .reg read $tx + .reg temp + .sig zzz + + ctx_arb[sig2] + + br[test_space#] + + loop_space#: + msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] + + alu[temp, $tx, -, @old_tx_seq_0] + alu[temp, temp, and, 0xff] + alu[@mpkts_in_flight, @mpkts_in_flight, -, temp] + + alu[@old_tx_seq_0, --, b, $tx] + + test_space#: + alu[--, PARTITION_THRESH, -, @mpkts_in_flight] + blo[loop_space#] + + alu[@mpkts_in_flight, @mpkts_in_flight, +, 1] + + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] + .end + + /* + * Copy the packet data to the TBUF. + */ + .begin + .reg temp + .sig copy_sig + + alu[temp, mpacket_size, -, 1] + alu_shf[temp, 0x10, or, temp, >>3] + alu_shf[temp, 0x10, or, temp, <<21] + alu_shf[temp, temp, or, tbuf_element_index, <<11] + alu_shf[--, temp, or, 1, <<18] + + dram[tbuf_wr, --, packet_data, 0, max_8], + indirect_ref, sig_done[copy_sig] + ctx_arb[copy_sig] + .end + + /* + * Mark TBUF element as ready-to-be-transmitted. + */ + .begin + .reg write $tsw $tsw2 + .xfer_order $tsw $tsw2 + .reg temp + .sig zzz + + alu_shf[temp, channel, or, mpacket_size, <<24] + alu_shf[$tsw, temp, or, sop_eop, <<8] + immed[$tsw2, 0] + + immed[temp, TBUF_CTRL] + alu_shf[temp, temp, or, tbuf_element_index, <<3] + msf[write, $tsw, temp, 0, 2], ctx_swap[zzz] + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig3] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] + .end + + /* + * If this was an EOP mpacket, recycle the TX buffer + * and signal the host. + */ + .begin + .reg write $stemp + .sig zzz + + alu[--, sop_eop, and, 1] + beq[mpacket_tx_loop#] + + tx_done_ring_full#: + br_inp_state[SCR_Ring3_Status, tx_done_ring_full#] + + alu[$stemp, --, b, buffer_handle] + scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz] + cap[fast_wr, 0, XSCALE_INT_A] + br[mpacket_tx_loop#] + .end + .end + + +zero_byte_packet#: + halt + + diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode new file mode 100644 index 000000000000..a433e24b0a51 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode @@ -0,0 +1,98 @@ +static struct ixp2000_uengine_code ixp2400_tx = +{ + .cpu_model_bitmask = 0x000003fe, + .cpu_min_revision = 0, + .cpu_max_revision = 255, + + .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS | + IXP2000_UENGINE_PRN_UPDATE_EVERY | + IXP2000_UENGINE_NN_FROM_PREVIOUS | + IXP2000_UENGINE_ASSERT_EMPTY_AT_0 | + IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT | + IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT, + + .initial_reg_values = (struct ixp2000_reg_value []) { + { -1, -1 } + }, + + .num_insns = 77, + .insns = (u8 []) { + 0xf0, 0x00, 0x00, 0x07, 0x00, + 0xd8, 0x03, 0x00, 0x00, 0x11, + 0x3c, 0x40, 0x00, 0x04, 0xe0, + 0x81, 0xf2, 0x02, 0x01, 0x00, + 0xd8, 0x00, 0x80, 0x01, 0x00, + 0xb0, 0x08, 0x06, 0x00, 0x00, + 0xf0, 0x00, 0x0c, 0x00, 0x80, + 0xb4, 0x49, 0x02, 0x03, 0x7f, + 0xf0, 0x00, 0x02, 0x83, 0x00, + 0xfc, 0x10, 0xac, 0x23, 0x08, + 0xfc, 0x10, 0xac, 0x43, 0x10, + 0xfc, 0x10, 0xac, 0x63, 0x18, + 0xe0, 0x00, 0x00, 0x00, 0x02, + 0xa0, 0x30, 0x02, 0x80, 0x00, + 0xd8, 0x06, 0x00, 0x01, 0x01, + 0x19, 0x40, 0x00, 0x04, 0x28, + 0xb0, 0x0a, 0x06, 0x00, 0x00, + 0xd8, 0x03, 0xc0, 0x01, 0x00, + 0x00, 0x44, 0x00, 0x80, 0x80, + 0xa0, 0x09, 0x06, 0x00, 0x00, + 0xb0, 0x0b, 0x06, 0x04, 0x00, + 0xd8, 0x13, 0x00, 0x01, 0x00, + 0xb0, 0x0c, 0x06, 0x08, 0x00, + 0xf0, 0x00, 0x0c, 0x00, 0xa0, + 0xfc, 0x10, 0xae, 0x23, 0x88, + 0xa0, 0x00, 0x12, 0x40, 0x00, + 0xb0, 0xc9, 0x02, 0x43, 0x01, + 0xb4, 0x49, 0x02, 0x43, 0x7f, + 0xb0, 0x00, 0x22, 0x80, 0x00, + 0xf0, 0x00, 0x02, 0x83, 0x00, + 0xf0, 0x00, 0x0c, 0x04, 0x02, + 0xb0, 0x40, 0x6c, 0x00, 0xa0, + 0xd8, 0x08, 0x80, 0x01, 0x01, + 0xaa, 0x00, 0x2c, 0x08, 0x02, + 0xa0, 0xc0, 0x30, 0x18, 0x90, + 0xa0, 0x00, 0x43, 0x00, 0x00, + 0xba, 0xc0, 0x32, 0xc0, 0xa0, + 0xaa, 0xb0, 0x00, 0x0f, 0x40, + 0xd8, 0x0a, 0x80, 0x01, 0x04, + 0xb0, 0x0a, 0x00, 0x08, 0x00, + 0xf0, 0x00, 0x00, 0x0f, 0x40, + 0xa4, 0x00, 0x2c, 0x08, 0x02, + 0xa0, 0x8a, 0x00, 0x0c, 0xa0, + 0xe0, 0x00, 0x00, 0x00, 0x04, + 0xd8, 0x0c, 0x80, 0x00, 0x18, + 0x3c, 0x40, 0x00, 0x04, 0xe0, + 0xba, 0x80, 0x42, 0x01, 0x80, + 0xb4, 0x40, 0x40, 0x13, 0xff, + 0xaa, 0x88, 0x00, 0x10, 0x80, + 0xb0, 0x08, 0x06, 0x00, 0x00, + 0xaa, 0xf0, 0x0d, 0x80, 0x80, + 0xd8, 0x0b, 0x40, 0x01, 0x05, + 0xa0, 0x88, 0x0c, 0x04, 0x80, + 0xfc, 0x10, 0xae, 0x43, 0x90, + 0xba, 0xc0, 0x50, 0x0f, 0x01, + 0x9a, 0x30, 0x50, 0x15, 0x30, + 0x9a, 0xb0, 0x50, 0x16, 0x30, + 0x9b, 0x50, 0x58, 0x16, 0x01, + 0x8a, 0xe2, 0x08, 0x16, 0x21, + 0x6b, 0x4e, 0x00, 0x83, 0x03, + 0xe0, 0x00, 0x00, 0x00, 0x30, + 0x9a, 0x80, 0x70, 0x0e, 0x04, + 0x8b, 0x88, 0x08, 0x1e, 0x02, + 0xf0, 0x00, 0x0c, 0x01, 0x81, + 0xf0, 0x01, 0x80, 0x1f, 0x00, + 0x9b, 0xd0, 0x78, 0x1e, 0x01, + 0x3d, 0x42, 0x00, 0x1c, 0x20, + 0xe0, 0x00, 0x00, 0x00, 0x08, + 0xfc, 0x10, 0xae, 0x63, 0x98, + 0xa4, 0x30, 0x0c, 0x04, 0x02, + 0xd8, 0x03, 0x00, 0x01, 0x00, + 0xd8, 0x11, 0xc1, 0x42, 0x14, + 0xa0, 0x18, 0x00, 0x08, 0x00, + 0x1a, 0x40, 0x00, 0x04, 0x2c, + 0x33, 0x00, 0x01, 0x2f, 0x20, + 0xd8, 0x03, 0x00, 0x00, 0x18, + 0xe0, 0x00, 0x02, 0x00, 0x00, + } +}; diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev.c b/drivers/net/ethernet/xscale/ixp2000/ixpdev.c new file mode 100644 index 000000000000..e122493ab70e --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixpdev.c @@ -0,0 +1,440 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/gfp.h> +#include <asm/hardware/uengine.h> +#include <asm/io.h> +#include "ixp2400_rx.ucode" +#include "ixp2400_tx.ucode" +#include "ixpdev_priv.h" +#include "ixpdev.h" +#include "pm3386.h" + +#define DRV_MODULE_VERSION "0.2" + +static int nds_count; +static struct net_device **nds; +static int nds_open; +static void (*set_port_admin_status)(int port, int up); + +static struct ixpdev_rx_desc * const rx_desc = + (struct ixpdev_rx_desc *)(IXP2000_SRAM0_VIRT_BASE + RX_BUF_DESC_BASE); +static struct ixpdev_tx_desc * const tx_desc = + (struct ixpdev_tx_desc *)(IXP2000_SRAM0_VIRT_BASE + TX_BUF_DESC_BASE); +static int tx_pointer; + + +static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + struct ixpdev_tx_desc *desc; + int entry; + unsigned long flags; + + if (unlikely(skb->len > PAGE_SIZE)) { + /* @@@ Count drops. */ + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + entry = tx_pointer; + tx_pointer = (tx_pointer + 1) % TX_BUF_COUNT; + + desc = tx_desc + entry; + desc->pkt_length = skb->len; + desc->channel = ip->channel; + + skb_copy_and_csum_dev(skb, phys_to_virt(desc->buf_addr)); + dev_kfree_skb(skb); + + ixp2000_reg_write(RING_TX_PENDING, + TX_BUF_DESC_BASE + (entry * sizeof(struct ixpdev_tx_desc))); + + local_irq_save(flags); + ip->tx_queue_entries++; + if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) + netif_stop_queue(dev); + local_irq_restore(flags); + + return NETDEV_TX_OK; +} + + +static int ixpdev_rx(struct net_device *dev, int processed, int budget) +{ + while (processed < budget) { + struct ixpdev_rx_desc *desc; + struct sk_buff *skb; + void *buf; + u32 _desc; + + _desc = ixp2000_reg_read(RING_RX_DONE); + if (_desc == 0) + return 0; + + desc = rx_desc + + ((_desc - RX_BUF_DESC_BASE) / sizeof(struct ixpdev_rx_desc)); + buf = phys_to_virt(desc->buf_addr); + + if (desc->pkt_length < 4 || desc->pkt_length > PAGE_SIZE) { + printk(KERN_ERR "ixp2000: rx err, length %d\n", + desc->pkt_length); + goto err; + } + + if (desc->channel < 0 || desc->channel >= nds_count) { + printk(KERN_ERR "ixp2000: rx err, channel %d\n", + desc->channel); + goto err; + } + + /* @@@ Make FCS stripping configurable. */ + desc->pkt_length -= 4; + + if (unlikely(!netif_running(nds[desc->channel]))) + goto err; + + skb = netdev_alloc_skb_ip_align(dev, desc->pkt_length); + if (likely(skb != NULL)) { + skb_copy_to_linear_data(skb, buf, desc->pkt_length); + skb_put(skb, desc->pkt_length); + skb->protocol = eth_type_trans(skb, nds[desc->channel]); + + netif_receive_skb(skb); + } + +err: + ixp2000_reg_write(RING_RX_PENDING, _desc); + processed++; + } + + return processed; +} + +/* dev always points to nds[0]. */ +static int ixpdev_poll(struct napi_struct *napi, int budget) +{ + struct ixpdev_priv *ip = container_of(napi, struct ixpdev_priv, napi); + struct net_device *dev = ip->dev; + int rx; + + rx = 0; + do { + ixp2000_reg_write(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0x00ff); + + rx = ixpdev_rx(dev, rx, budget); + if (rx >= budget) + break; + } while (ixp2000_reg_read(IXP2000_IRQ_THD_RAW_STATUS_A_0) & 0x00ff); + + napi_complete(napi); + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0x00ff); + + return rx; +} + +static void ixpdev_tx_complete(void) +{ + int channel; + u32 wake; + + wake = 0; + while (1) { + struct ixpdev_priv *ip; + u32 desc; + int entry; + + desc = ixp2000_reg_read(RING_TX_DONE); + if (desc == 0) + break; + + /* @@@ Check whether entries come back in order. */ + entry = (desc - TX_BUF_DESC_BASE) / sizeof(struct ixpdev_tx_desc); + channel = tx_desc[entry].channel; + + if (channel < 0 || channel >= nds_count) { + printk(KERN_ERR "ixp2000: txcomp channel index " + "out of bounds (%d, %.8i, %d)\n", + channel, (unsigned int)desc, entry); + continue; + } + + ip = netdev_priv(nds[channel]); + if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) + wake |= 1 << channel; + ip->tx_queue_entries--; + } + + for (channel = 0; wake != 0; channel++) { + if (wake & (1 << channel)) { + netif_wake_queue(nds[channel]); + wake &= ~(1 << channel); + } + } +} + +static irqreturn_t ixpdev_interrupt(int irq, void *dev_id) +{ + u32 status; + + status = ixp2000_reg_read(IXP2000_IRQ_THD_STATUS_A_0); + if (status == 0) + return IRQ_NONE; + + /* + * Any of the eight receive units signaled RX? + */ + if (status & 0x00ff) { + struct net_device *dev = nds[0]; + struct ixpdev_priv *ip = netdev_priv(dev); + + ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff); + if (likely(napi_schedule_prep(&ip->napi))) { + __napi_schedule(&ip->napi); + } else { + printk(KERN_CRIT "ixp2000: irq while polling!!\n"); + } + } + + /* + * Any of the eight transmit units signaled TXdone? + */ + if (status & 0xff00) { + ixp2000_reg_wrb(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0xff00); + ixpdev_tx_complete(); + } + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void ixpdev_poll_controller(struct net_device *dev) +{ + disable_irq(IRQ_IXP2000_THDA0); + ixpdev_interrupt(IRQ_IXP2000_THDA0, dev); + enable_irq(IRQ_IXP2000_THDA0); +} +#endif + +static int ixpdev_open(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + int err; + + napi_enable(&ip->napi); + if (!nds_open++) { + err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt, + IRQF_SHARED, "ixp2000_eth", nds); + if (err) { + nds_open--; + napi_disable(&ip->napi); + return err; + } + + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0xffff); + } + + set_port_admin_status(ip->channel, 1); + netif_start_queue(dev); + + return 0; +} + +static int ixpdev_close(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + + netif_stop_queue(dev); + napi_disable(&ip->napi); + set_port_admin_status(ip->channel, 0); + + if (!--nds_open) { + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0xffff); + free_irq(IRQ_IXP2000_THDA0, nds); + } + + return 0; +} + +static struct net_device_stats *ixpdev_get_stats(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + + pm3386_get_stats(ip->channel, &(dev->stats)); + + return &(dev->stats); +} + +static const struct net_device_ops ixpdev_netdev_ops = { + .ndo_open = ixpdev_open, + .ndo_stop = ixpdev_close, + .ndo_start_xmit = ixpdev_xmit, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_get_stats = ixpdev_get_stats, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ixpdev_poll_controller, +#endif +}; + +struct net_device *ixpdev_alloc(int channel, int sizeof_priv) +{ + struct net_device *dev; + struct ixpdev_priv *ip; + + dev = alloc_etherdev(sizeof_priv); + if (dev == NULL) + return NULL; + + dev->netdev_ops = &ixpdev_netdev_ops; + + dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM; + + ip = netdev_priv(dev); + ip->dev = dev; + netif_napi_add(dev, &ip->napi, ixpdev_poll, 64); + ip->channel = channel; + ip->tx_queue_entries = 0; + + return dev; +} + +int ixpdev_init(int __nds_count, struct net_device **__nds, + void (*__set_port_admin_status)(int port, int up)) +{ + int i; + int err; + + BUILD_BUG_ON(RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192); + + printk(KERN_INFO "IXP2000 MSF ethernet driver %s\n", DRV_MODULE_VERSION); + + nds_count = __nds_count; + nds = __nds; + set_port_admin_status = __set_port_admin_status; + + for (i = 0; i < RX_BUF_COUNT; i++) { + void *buf; + + buf = (void *)get_zeroed_page(GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + while (--i >= 0) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); + goto err_out; + } + rx_desc[i].buf_addr = virt_to_phys(buf); + rx_desc[i].buf_length = PAGE_SIZE; + } + + /* @@@ Maybe we shouldn't be preallocating TX buffers. */ + for (i = 0; i < TX_BUF_COUNT; i++) { + void *buf; + + buf = (void *)get_zeroed_page(GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + while (--i >= 0) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + goto err_free_rx; + } + tx_desc[i].buf_addr = virt_to_phys(buf); + } + + /* 256 entries, ring status set means 'empty', base address 0x0000. */ + ixp2000_reg_write(RING_RX_PENDING_BASE, 0x44000000); + ixp2000_reg_write(RING_RX_PENDING_HEAD, 0x00000000); + ixp2000_reg_write(RING_RX_PENDING_TAIL, 0x00000000); + + /* 256 entries, ring status set means 'full', base address 0x0400. */ + ixp2000_reg_write(RING_RX_DONE_BASE, 0x40000400); + ixp2000_reg_write(RING_RX_DONE_HEAD, 0x00000000); + ixp2000_reg_write(RING_RX_DONE_TAIL, 0x00000000); + + for (i = 0; i < RX_BUF_COUNT; i++) { + ixp2000_reg_write(RING_RX_PENDING, + RX_BUF_DESC_BASE + (i * sizeof(struct ixpdev_rx_desc))); + } + + ixp2000_uengine_load(0, &ixp2400_rx); + ixp2000_uengine_start_contexts(0, 0xff); + + /* 256 entries, ring status set means 'empty', base address 0x0800. */ + ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800); + ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000); + ixp2000_reg_write(RING_TX_PENDING_TAIL, 0x00000000); + + /* 256 entries, ring status set means 'full', base address 0x0c00. */ + ixp2000_reg_write(RING_TX_DONE_BASE, 0x40000c00); + ixp2000_reg_write(RING_TX_DONE_HEAD, 0x00000000); + ixp2000_reg_write(RING_TX_DONE_TAIL, 0x00000000); + + ixp2000_uengine_load(1, &ixp2400_tx); + ixp2000_uengine_start_contexts(1, 0xff); + + for (i = 0; i < nds_count; i++) { + err = register_netdev(nds[i]); + if (err) { + while (--i >= 0) + unregister_netdev(nds[i]); + goto err_free_tx; + } + } + + for (i = 0; i < nds_count; i++) { + printk(KERN_INFO "%s: IXP2000 MSF ethernet (port %d), " + "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", nds[i]->name, i, + nds[i]->dev_addr[0], nds[i]->dev_addr[1], + nds[i]->dev_addr[2], nds[i]->dev_addr[3], + nds[i]->dev_addr[4], nds[i]->dev_addr[5]); + } + + return 0; + +err_free_tx: + for (i = 0; i < TX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + +err_free_rx: + for (i = 0; i < RX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); + +err_out: + return err; +} + +void ixpdev_deinit(void) +{ + int i; + + /* @@@ Flush out pending packets. */ + + for (i = 0; i < nds_count; i++) + unregister_netdev(nds[i]); + + ixp2000_uengine_stop_contexts(1, 0xff); + ixp2000_uengine_stop_contexts(0, 0xff); + ixp2000_uengine_reset(0x3); + + for (i = 0; i < TX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + + for (i = 0; i < RX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); +} diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev.h new file mode 100644 index 000000000000..391ece623243 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixpdev.h @@ -0,0 +1,29 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __IXPDEV_H +#define __IXPDEV_H + +struct ixpdev_priv +{ + struct net_device *dev; + struct napi_struct napi; + int channel; + int tx_queue_entries; +}; + +struct net_device *ixpdev_alloc(int channel, int sizeof_priv); +int ixpdev_init(int num_ports, struct net_device **nds, + void (*set_port_admin_status)(int port, int up)); +void ixpdev_deinit(void); + + +#endif diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h new file mode 100644 index 000000000000..86aa08ea0c33 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h @@ -0,0 +1,57 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __IXPDEV_PRIV_H +#define __IXPDEV_PRIV_H + +#define RX_BUF_DESC_BASE 0x00001000 +#define RX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_rx_desc))) +#define TX_BUF_DESC_BASE 0x00002000 +#define TX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_tx_desc))) +#define TX_BUF_COUNT_PER_CHAN (TX_BUF_COUNT / 4) + +#define RING_RX_PENDING ((u32 *)IXP2000_SCRATCH_RING_VIRT_BASE) +#define RING_RX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 4)) +#define RING_TX_PENDING ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 8)) +#define RING_TX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 12)) + +#define SCRATCH_REG(x) ((u32 *)(IXP2000_GLOBAL_REG_VIRT_BASE | 0x0800 | (x))) +#define RING_RX_PENDING_BASE SCRATCH_REG(0x00) +#define RING_RX_PENDING_HEAD SCRATCH_REG(0x04) +#define RING_RX_PENDING_TAIL SCRATCH_REG(0x08) +#define RING_RX_DONE_BASE SCRATCH_REG(0x10) +#define RING_RX_DONE_HEAD SCRATCH_REG(0x14) +#define RING_RX_DONE_TAIL SCRATCH_REG(0x18) +#define RING_TX_PENDING_BASE SCRATCH_REG(0x20) +#define RING_TX_PENDING_HEAD SCRATCH_REG(0x24) +#define RING_TX_PENDING_TAIL SCRATCH_REG(0x28) +#define RING_TX_DONE_BASE SCRATCH_REG(0x30) +#define RING_TX_DONE_HEAD SCRATCH_REG(0x34) +#define RING_TX_DONE_TAIL SCRATCH_REG(0x38) + +struct ixpdev_rx_desc +{ + u32 buf_addr; + u32 buf_length; + u32 channel; + u32 pkt_length; +}; + +struct ixpdev_tx_desc +{ + u32 buf_addr; + u32 pkt_length; + u32 channel; + u32 unused; +}; + + +#endif diff --git a/drivers/net/ethernet/xscale/ixp2000/pm3386.c b/drivers/net/ethernet/xscale/ixp2000/pm3386.c new file mode 100644 index 000000000000..e08d3f9863b8 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/pm3386.c @@ -0,0 +1,351 @@ +/* + * Helper functions for the PM3386s on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <asm/io.h> +#include "pm3386.h" + +/* + * Read from register 'reg' of PM3386 device 'pm'. + */ +static u16 pm3386_reg_read(int pm, int reg) +{ + void *_reg; + u16 value; + + _reg = (void *)ENP2611_PM3386_0_VIRT_BASE; + if (pm == 1) + _reg = (void *)ENP2611_PM3386_1_VIRT_BASE; + + value = *((volatile u16 *)(_reg + (reg << 1))); + +// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value); + + return value; +} + +/* + * Write to register 'reg' of PM3386 device 'pm', and perform + * a readback from the identification register. + */ +static void pm3386_reg_write(int pm, int reg, u16 value) +{ + void *_reg; + u16 dummy; + +// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value); + + _reg = (void *)ENP2611_PM3386_0_VIRT_BASE; + if (pm == 1) + _reg = (void *)ENP2611_PM3386_1_VIRT_BASE; + + *((volatile u16 *)(_reg + (reg << 1))) = value; + + dummy = *((volatile u16 *)_reg); + __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); +} + +/* + * Read from port 'port' register 'reg', where the registers + * for the different ports are 'spacing' registers apart. + */ +static u16 pm3386_port_reg_read(int port, int _reg, int spacing) +{ + int reg; + + reg = _reg; + if (port & 1) + reg += spacing; + + return pm3386_reg_read(port >> 1, reg); +} + +/* + * Write to port 'port' register 'reg', where the registers + * for the different ports are 'spacing' registers apart. + */ +static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value) +{ + int reg; + + reg = _reg; + if (port & 1) + reg += spacing; + + pm3386_reg_write(port >> 1, reg, value); +} + +int pm3386_secondary_present(void) +{ + return pm3386_reg_read(1, 0) == 0x3386; +} + +void pm3386_reset(void) +{ + u8 mac[3][6]; + int secondary; + + secondary = pm3386_secondary_present(); + + /* Save programmed MAC addresses. */ + pm3386_get_mac(0, mac[0]); + pm3386_get_mac(1, mac[1]); + if (secondary) + pm3386_get_mac(2, mac[2]); + + /* Assert analog and digital reset. */ + pm3386_reg_write(0, 0x002, 0x0060); + if (secondary) + pm3386_reg_write(1, 0x002, 0x0060); + mdelay(1); + + /* Deassert analog reset. */ + pm3386_reg_write(0, 0x002, 0x0062); + if (secondary) + pm3386_reg_write(1, 0x002, 0x0062); + mdelay(10); + + /* Deassert digital reset. */ + pm3386_reg_write(0, 0x002, 0x0063); + if (secondary) + pm3386_reg_write(1, 0x002, 0x0063); + mdelay(10); + + /* Restore programmed MAC addresses. */ + pm3386_set_mac(0, mac[0]); + pm3386_set_mac(1, mac[1]); + if (secondary) + pm3386_set_mac(2, mac[2]); + + /* Disable carrier on all ports. */ + pm3386_set_carrier(0, 0); + pm3386_set_carrier(1, 0); + if (secondary) + pm3386_set_carrier(2, 0); +} + +static u16 swaph(u16 x) +{ + return ((x << 8) | (x >> 8)) & 0xffff; +} + +int pm3386_port_count(void) +{ + return 2 + pm3386_secondary_present(); +} + +void pm3386_init_port(int port) +{ + int pm = port >> 1; + + /* + * Work around ENP2611 bootloader programming MAC address + * in reverse. + */ + if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 && + (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) { + u16 temp[3]; + + temp[0] = pm3386_port_reg_read(port, 0x308, 0x100); + temp[1] = pm3386_port_reg_read(port, 0x309, 0x100); + temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100); + pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2])); + pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1])); + pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0])); + } + + /* + * Initialise narrowbanding mode. See application note 2010486 + * for more information. (@@@ We also need to issue a reset + * when ROOL or DOOL are detected.) + */ + pm3386_port_reg_write(port, 0x708, 0x10, 0xd055); + udelay(500); + pm3386_port_reg_write(port, 0x708, 0x10, 0x5055); + + /* + * SPI-3 ingress block. Set 64 bytes SPI-3 burst size + * towards SPI-3 bridge. + */ + pm3386_port_reg_write(port, 0x122, 0x20, 0x0002); + + /* + * Enable ingress protocol checking, and soft reset the + * SPI-3 ingress block. + */ + pm3386_reg_write(pm, 0x103, 0x0003); + while (!(pm3386_reg_read(pm, 0x103) & 0x80)) + ; + + /* + * SPI-3 egress block. Gather 12288 bytes of the current + * packet in the TX fifo before initiating transmit on the + * SERDES interface. (Prevents TX underflows.) + */ + pm3386_port_reg_write(port, 0x221, 0x20, 0x0007); + + /* + * Enforce odd parity from the SPI-3 bridge, and soft reset + * the SPI-3 egress block. + */ + pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1))); + while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c) + ; + + /* + * EGMAC block. Set this channels to reject long preambles, + * not send or transmit PAUSE frames, enable preamble checking, + * disable frame length checking, enable FCS appending, enable + * TX frame padding. + */ + pm3386_port_reg_write(port, 0x302, 0x100, 0x0113); + + /* + * Soft reset the EGMAC block. + */ + pm3386_port_reg_write(port, 0x301, 0x100, 0x8000); + pm3386_port_reg_write(port, 0x301, 0x100, 0x0000); + + /* + * Auto-sense autonegotiation status. + */ + pm3386_port_reg_write(port, 0x306, 0x100, 0x0100); + + /* + * Allow reception of jumbo frames. + */ + pm3386_port_reg_write(port, 0x310, 0x100, 9018); + + /* + * Allow transmission of jumbo frames. + */ + pm3386_port_reg_write(port, 0x336, 0x100, 9018); + + /* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */ + + /* + * Set autonegotiation parameters to 'no PAUSE, full duplex.' + */ + pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020); + + /* + * Enable and restart autonegotiation. + */ + pm3386_port_reg_write(port, 0x318, 0x100, 0x0003); + pm3386_port_reg_write(port, 0x318, 0x100, 0x0002); +} + +void pm3386_get_mac(int port, u8 *mac) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x308, 0x100); + mac[0] = temp & 0xff; + mac[1] = (temp >> 8) & 0xff; + + temp = pm3386_port_reg_read(port, 0x309, 0x100); + mac[2] = temp & 0xff; + mac[3] = (temp >> 8) & 0xff; + + temp = pm3386_port_reg_read(port, 0x30a, 0x100); + mac[4] = temp & 0xff; + mac[5] = (temp >> 8) & 0xff; +} + +void pm3386_set_mac(int port, u8 *mac) +{ + pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]); + pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]); + pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]); +} + +static u32 pm3386_get_stat(int port, u16 base) +{ + u32 value; + + value = pm3386_port_reg_read(port, base, 0x100); + value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16; + + return value; +} + +void pm3386_get_stats(int port, struct net_device_stats *stats) +{ + /* + * Snapshot statistics counters. + */ + pm3386_port_reg_write(port, 0x500, 0x100, 0x0001); + while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001) + ; + + memset(stats, 0, sizeof(*stats)); + + stats->rx_packets = pm3386_get_stat(port, 0x510); + stats->tx_packets = pm3386_get_stat(port, 0x590); + stats->rx_bytes = pm3386_get_stat(port, 0x514); + stats->tx_bytes = pm3386_get_stat(port, 0x594); + /* @@@ Add other stats. */ +} + +void pm3386_set_carrier(int port, int state) +{ + pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000); +} + +int pm3386_is_link_up(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x31a, 0x100); + temp = pm3386_port_reg_read(port, 0x31a, 0x100); + + return !!(temp & 0x0002); +} + +void pm3386_enable_rx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp |= 0x1000; + pm3386_port_reg_write(port, 0x303, 0x100, temp); +} + +void pm3386_disable_rx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp &= 0xefff; + pm3386_port_reg_write(port, 0x303, 0x100, temp); +} + +void pm3386_enable_tx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp |= 0x4000; + pm3386_port_reg_write(port, 0x303, 0x100, temp); +} + +void pm3386_disable_tx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp &= 0xbfff; + pm3386_port_reg_write(port, 0x303, 0x100, temp); +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/xscale/ixp2000/pm3386.h b/drivers/net/ethernet/xscale/ixp2000/pm3386.h new file mode 100644 index 000000000000..cc4183dca911 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp2000/pm3386.h @@ -0,0 +1,29 @@ +/* + * Helper functions for the PM3386s on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org> + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __PM3386_H +#define __PM3386_H + +void pm3386_reset(void); +int pm3386_port_count(void); +void pm3386_init_port(int port); +void pm3386_get_mac(int port, u8 *mac); +void pm3386_set_mac(int port, u8 *mac); +void pm3386_get_stats(int port, struct net_device_stats *stats); +void pm3386_set_carrier(int port, int state); +int pm3386_is_link_up(int port); +void pm3386_enable_rx(int port); +void pm3386_disable_rx(int port); +void pm3386_enable_tx(int port); +void pm3386_disable_tx(int port); + + +#endif diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c new file mode 100644 index 000000000000..de51e8453c13 --- /dev/null +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -0,0 +1,1489 @@ +/* + * Intel IXP4xx Ethernet driver for Linux + * + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * Ethernet port config (0x00 is not present on IXP42X): + * + * logical port 0x00 0x10 0x20 + * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C) + * physical PortId 2 0 1 + * TX queue 23 24 25 + * RX-free queue 26 27 28 + * TX-done queue is always 31, per-port RX and TX-ready queues are configurable + * + * + * Queue entries: + * bits 0 -> 1 - NPE ID (RX and TX-done) + * bits 0 -> 2 - priority (TX, per 802.1D) + * bits 3 -> 4 - port ID (user-set?) + * bits 5 -> 31 - physical descriptor address + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/etherdevice.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/net_tstamp.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/ptp_classify.h> +#include <linux/slab.h> +#include <mach/ixp46x_ts.h> +#include <mach/npe.h> +#include <mach/qmgr.h> + +#define DEBUG_DESC 0 +#define DEBUG_RX 0 +#define DEBUG_TX 0 +#define DEBUG_PKT_BYTES 0 +#define DEBUG_MDIO 0 +#define DEBUG_CLOSE 0 + +#define DRV_NAME "ixp4xx_eth" + +#define MAX_NPES 3 + +#define RX_DESCS 64 /* also length of all RX queues */ +#define TX_DESCS 16 /* also length of all TX queues */ +#define TXDONE_QUEUE_LEN 64 /* dwords */ + +#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS)) +#define REGS_SIZE 0x1000 +#define MAX_MRU 1536 /* 0x600 */ +#define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4) + +#define NAPI_WEIGHT 16 +#define MDIO_INTERVAL (3 * HZ) +#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */ +#define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */ + +#define NPE_ID(port_id) ((port_id) >> 4) +#define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3) +#define TX_QUEUE(port_id) (NPE_ID(port_id) + 23) +#define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26) +#define TXDONE_QUEUE 31 + +#define PTP_SLAVE_MODE 1 +#define PTP_MASTER_MODE 2 +#define PORT2CHANNEL(p) NPE_ID(p->id) + +/* TX Control Registers */ +#define TX_CNTRL0_TX_EN 0x01 +#define TX_CNTRL0_HALFDUPLEX 0x02 +#define TX_CNTRL0_RETRY 0x04 +#define TX_CNTRL0_PAD_EN 0x08 +#define TX_CNTRL0_APPEND_FCS 0x10 +#define TX_CNTRL0_2DEFER 0x20 +#define TX_CNTRL0_RMII 0x40 /* reduced MII */ +#define TX_CNTRL1_RETRIES 0x0F /* 4 bits */ + +/* RX Control Registers */ +#define RX_CNTRL0_RX_EN 0x01 +#define RX_CNTRL0_PADSTRIP_EN 0x02 +#define RX_CNTRL0_SEND_FCS 0x04 +#define RX_CNTRL0_PAUSE_EN 0x08 +#define RX_CNTRL0_LOOP_EN 0x10 +#define RX_CNTRL0_ADDR_FLTR_EN 0x20 +#define RX_CNTRL0_RX_RUNT_EN 0x40 +#define RX_CNTRL0_BCAST_DIS 0x80 +#define RX_CNTRL1_DEFER_EN 0x01 + +/* Core Control Register */ +#define CORE_RESET 0x01 +#define CORE_RX_FIFO_FLUSH 0x02 +#define CORE_TX_FIFO_FLUSH 0x04 +#define CORE_SEND_JAM 0x08 +#define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */ + +#define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \ + TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \ + TX_CNTRL0_2DEFER) +#define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN +#define DEFAULT_CORE_CNTRL CORE_MDC_EN + + +/* NPE message codes */ +#define NPE_GETSTATUS 0x00 +#define NPE_EDB_SETPORTADDRESS 0x01 +#define NPE_EDB_GETMACADDRESSDATABASE 0x02 +#define NPE_EDB_SETMACADDRESSSDATABASE 0x03 +#define NPE_GETSTATS 0x04 +#define NPE_RESETSTATS 0x05 +#define NPE_SETMAXFRAMELENGTHS 0x06 +#define NPE_VLAN_SETRXTAGMODE 0x07 +#define NPE_VLAN_SETDEFAULTRXVID 0x08 +#define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09 +#define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A +#define NPE_VLAN_SETRXQOSENTRY 0x0B +#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C +#define NPE_STP_SETBLOCKINGSTATE 0x0D +#define NPE_FW_SETFIREWALLMODE 0x0E +#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F +#define NPE_PC_SETAPMACTABLE 0x11 +#define NPE_SETLOOPBACK_MODE 0x12 +#define NPE_PC_SETBSSIDTABLE 0x13 +#define NPE_ADDRESS_FILTER_CONFIG 0x14 +#define NPE_APPENDFCSCONFIG 0x15 +#define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16 +#define NPE_MAC_RECOVERY_START 0x17 + + +#ifdef __ARMEB__ +typedef struct sk_buff buffer_t; +#define free_buffer dev_kfree_skb +#define free_buffer_irq dev_kfree_skb_irq +#else +typedef void buffer_t; +#define free_buffer kfree +#define free_buffer_irq kfree +#endif + +struct eth_regs { + u32 tx_control[2], __res1[2]; /* 000 */ + u32 rx_control[2], __res2[2]; /* 010 */ + u32 random_seed, __res3[3]; /* 020 */ + u32 partial_empty_threshold, __res4; /* 030 */ + u32 partial_full_threshold, __res5; /* 038 */ + u32 tx_start_bytes, __res6[3]; /* 040 */ + u32 tx_deferral, rx_deferral, __res7[2];/* 050 */ + u32 tx_2part_deferral[2], __res8[2]; /* 060 */ + u32 slot_time, __res9[3]; /* 070 */ + u32 mdio_command[4]; /* 080 */ + u32 mdio_status[4]; /* 090 */ + u32 mcast_mask[6], __res10[2]; /* 0A0 */ + u32 mcast_addr[6], __res11[2]; /* 0C0 */ + u32 int_clock_threshold, __res12[3]; /* 0E0 */ + u32 hw_addr[6], __res13[61]; /* 0F0 */ + u32 core_control; /* 1FC */ +}; + +struct port { + struct resource *mem_res; + struct eth_regs __iomem *regs; + struct npe *npe; + struct net_device *netdev; + struct napi_struct napi; + struct phy_device *phydev; + struct eth_plat_info *plat; + buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS]; + struct desc *desc_tab; /* coherent */ + u32 desc_tab_phys; + int id; /* logical port ID */ + int speed, duplex; + u8 firmware[4]; + int hwts_tx_en; + int hwts_rx_en; +}; + +/* NPE message structure */ +struct msg { +#ifdef __ARMEB__ + u8 cmd, eth_id, byte2, byte3; + u8 byte4, byte5, byte6, byte7; +#else + u8 byte3, byte2, eth_id, cmd; + u8 byte7, byte6, byte5, byte4; +#endif +}; + +/* Ethernet packet descriptor */ +struct desc { + u32 next; /* pointer to next buffer, unused */ + +#ifdef __ARMEB__ + u16 buf_len; /* buffer length */ + u16 pkt_len; /* packet length */ + u32 data; /* pointer to data buffer in RAM */ + u8 dest_id; + u8 src_id; + u16 flags; + u8 qos; + u8 padlen; + u16 vlan_tci; +#else + u16 pkt_len; /* packet length */ + u16 buf_len; /* buffer length */ + u32 data; /* pointer to data buffer in RAM */ + u16 flags; + u8 src_id; + u8 dest_id; + u16 vlan_tci; + u8 padlen; + u8 qos; +#endif + +#ifdef __ARMEB__ + u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3; + u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1; + u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5; +#else + u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0; + u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4; + u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2; +#endif +}; + + +#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \ + (n) * sizeof(struct desc)) +#define rx_desc_ptr(port, n) (&(port)->desc_tab[n]) + +#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \ + ((n) + RX_DESCS) * sizeof(struct desc)) +#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS]) + +#ifndef __ARMEB__ +static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt) +{ + int i; + for (i = 0; i < cnt; i++) + dest[i] = swab32(src[i]); +} +#endif + +static spinlock_t mdio_lock; +static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */ +static struct mii_bus *mdio_bus; +static int ports_open; +static struct port *npe_port_tab[MAX_NPES]; +static struct dma_pool *dma_pool; + +static struct sock_filter ptp_filter[] = { + PTP_FILTER +}; + +static int ixp_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid) +{ + u8 *data = skb->data; + unsigned int offset; + u16 *hi, *id; + u32 lo; + + if (sk_run_filter(skb, ptp_filter) != PTP_CLASS_V1_IPV4) + return 0; + + offset = ETH_HLEN + IPV4_HLEN(data) + UDP_HLEN; + + if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid)) + return 0; + + hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID); + id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID); + + memcpy(&lo, &hi[1], sizeof(lo)); + + return (uid_hi == ntohs(*hi) && + uid_lo == ntohl(lo) && + seqid == ntohs(*id)); +} + +static void ixp_rx_timestamp(struct port *port, struct sk_buff *skb) +{ + struct skb_shared_hwtstamps *shhwtstamps; + struct ixp46x_ts_regs *regs; + u64 ns; + u32 ch, hi, lo, val; + u16 uid, seq; + + if (!port->hwts_rx_en) + return; + + ch = PORT2CHANNEL(port); + + regs = (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT; + + val = __raw_readl(®s->channel[ch].ch_event); + + if (!(val & RX_SNAPSHOT_LOCKED)) + return; + + lo = __raw_readl(®s->channel[ch].src_uuid_lo); + hi = __raw_readl(®s->channel[ch].src_uuid_hi); + + uid = hi & 0xffff; + seq = (hi >> 16) & 0xffff; + + if (!ixp_ptp_match(skb, htons(uid), htonl(lo), htons(seq))) + goto out; + + lo = __raw_readl(®s->channel[ch].rx_snap_lo); + hi = __raw_readl(®s->channel[ch].rx_snap_hi); + ns = ((u64) hi) << 32; + ns |= lo; + ns <<= TICKS_NS_SHIFT; + + shhwtstamps = skb_hwtstamps(skb); + memset(shhwtstamps, 0, sizeof(*shhwtstamps)); + shhwtstamps->hwtstamp = ns_to_ktime(ns); +out: + __raw_writel(RX_SNAPSHOT_LOCKED, ®s->channel[ch].ch_event); +} + +static void ixp_tx_timestamp(struct port *port, struct sk_buff *skb) +{ + struct skb_shared_hwtstamps shhwtstamps; + struct ixp46x_ts_regs *regs; + struct skb_shared_info *shtx; + u64 ns; + u32 ch, cnt, hi, lo, val; + + shtx = skb_shinfo(skb); + if (unlikely(shtx->tx_flags & SKBTX_HW_TSTAMP && port->hwts_tx_en)) + shtx->tx_flags |= SKBTX_IN_PROGRESS; + else + return; + + ch = PORT2CHANNEL(port); + + regs = (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT; + + /* + * This really stinks, but we have to poll for the Tx time stamp. + * Usually, the time stamp is ready after 4 to 6 microseconds. + */ + for (cnt = 0; cnt < 100; cnt++) { + val = __raw_readl(®s->channel[ch].ch_event); + if (val & TX_SNAPSHOT_LOCKED) + break; + udelay(1); + } + if (!(val & TX_SNAPSHOT_LOCKED)) { + shtx->tx_flags &= ~SKBTX_IN_PROGRESS; + return; + } + + lo = __raw_readl(®s->channel[ch].tx_snap_lo); + hi = __raw_readl(®s->channel[ch].tx_snap_hi); + ns = ((u64) hi) << 32; + ns |= lo; + ns <<= TICKS_NS_SHIFT; + + memset(&shhwtstamps, 0, sizeof(shhwtstamps)); + shhwtstamps.hwtstamp = ns_to_ktime(ns); + skb_tstamp_tx(skb, &shhwtstamps); + + __raw_writel(TX_SNAPSHOT_LOCKED, ®s->channel[ch].ch_event); +} + +static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct hwtstamp_config cfg; + struct ixp46x_ts_regs *regs; + struct port *port = netdev_priv(netdev); + int ch; + + if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg))) + return -EFAULT; + + if (cfg.flags) /* reserved for future extensions */ + return -EINVAL; + + ch = PORT2CHANNEL(port); + regs = (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT; + + switch (cfg.tx_type) { + case HWTSTAMP_TX_OFF: + port->hwts_tx_en = 0; + break; + case HWTSTAMP_TX_ON: + port->hwts_tx_en = 1; + break; + default: + return -ERANGE; + } + + switch (cfg.rx_filter) { + case HWTSTAMP_FILTER_NONE: + port->hwts_rx_en = 0; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + port->hwts_rx_en = PTP_SLAVE_MODE; + __raw_writel(0, ®s->channel[ch].ch_control); + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + port->hwts_rx_en = PTP_MASTER_MODE; + __raw_writel(MASTER_MODE, ®s->channel[ch].ch_control); + break; + default: + return -ERANGE; + } + + /* Clear out any old time stamps. */ + __raw_writel(TX_SNAPSHOT_LOCKED | RX_SNAPSHOT_LOCKED, + ®s->channel[ch].ch_event); + + return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0; +} + +static int ixp4xx_mdio_cmd(struct mii_bus *bus, int phy_id, int location, + int write, u16 cmd) +{ + int cycles = 0; + + if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) { + printk(KERN_ERR "%s: MII not ready to transmit\n", bus->name); + return -1; + } + + if (write) { + __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]); + __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]); + } + __raw_writel(((phy_id << 5) | location) & 0xFF, + &mdio_regs->mdio_command[2]); + __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */, + &mdio_regs->mdio_command[3]); + + while ((cycles < MAX_MDIO_RETRIES) && + (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) { + udelay(1); + cycles++; + } + + if (cycles == MAX_MDIO_RETRIES) { + printk(KERN_ERR "%s #%i: MII write failed\n", bus->name, + phy_id); + return -1; + } + +#if DEBUG_MDIO + printk(KERN_DEBUG "%s #%i: mdio_%s() took %i cycles\n", bus->name, + phy_id, write ? "write" : "read", cycles); +#endif + + if (write) + return 0; + + if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) { +#if DEBUG_MDIO + printk(KERN_DEBUG "%s #%i: MII read failed\n", bus->name, + phy_id); +#endif + return 0xFFFF; /* don't return error */ + } + + return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) | + ((__raw_readl(&mdio_regs->mdio_status[1]) & 0xFF) << 8); +} + +static int ixp4xx_mdio_read(struct mii_bus *bus, int phy_id, int location) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&mdio_lock, flags); + ret = ixp4xx_mdio_cmd(bus, phy_id, location, 0, 0); + spin_unlock_irqrestore(&mdio_lock, flags); +#if DEBUG_MDIO + printk(KERN_DEBUG "%s #%i: MII read [%i] -> 0x%X\n", bus->name, + phy_id, location, ret); +#endif + return ret; +} + +static int ixp4xx_mdio_write(struct mii_bus *bus, int phy_id, int location, + u16 val) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&mdio_lock, flags); + ret = ixp4xx_mdio_cmd(bus, phy_id, location, 1, val); + spin_unlock_irqrestore(&mdio_lock, flags); +#if DEBUG_MDIO + printk(KERN_DEBUG "%s #%i: MII write [%i] <- 0x%X, err = %i\n", + bus->name, phy_id, location, val, ret); +#endif + return ret; +} + +static int ixp4xx_mdio_register(void) +{ + int err; + + if (!(mdio_bus = mdiobus_alloc())) + return -ENOMEM; + + if (cpu_is_ixp43x()) { + /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */ + if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH)) + return -ENODEV; + mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; + } else { + /* All MII PHY accesses use NPE-B Ethernet registers */ + if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) + return -ENODEV; + mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; + } + + __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); + spin_lock_init(&mdio_lock); + mdio_bus->name = "IXP4xx MII Bus"; + mdio_bus->read = &ixp4xx_mdio_read; + mdio_bus->write = &ixp4xx_mdio_write; + strcpy(mdio_bus->id, "0"); + + if ((err = mdiobus_register(mdio_bus))) + mdiobus_free(mdio_bus); + return err; +} + +static void ixp4xx_mdio_remove(void) +{ + mdiobus_unregister(mdio_bus); + mdiobus_free(mdio_bus); +} + + +static void ixp4xx_adjust_link(struct net_device *dev) +{ + struct port *port = netdev_priv(dev); + struct phy_device *phydev = port->phydev; + + if (!phydev->link) { + if (port->speed) { + port->speed = 0; + printk(KERN_INFO "%s: link down\n", dev->name); + } + return; + } + + if (port->speed == phydev->speed && port->duplex == phydev->duplex) + return; + + port->speed = phydev->speed; + port->duplex = phydev->duplex; + + if (port->duplex) + __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX, + &port->regs->tx_control[0]); + else + __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX, + &port->regs->tx_control[0]); + + printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n", + dev->name, port->speed, port->duplex ? "full" : "half"); +} + + +static inline void debug_pkt(struct net_device *dev, const char *func, + u8 *data, int len) +{ +#if DEBUG_PKT_BYTES + int i; + + printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len); + for (i = 0; i < len; i++) { + if (i >= DEBUG_PKT_BYTES) + break; + printk("%s%02X", + ((i == 6) || (i == 12) || (i >= 14)) ? " " : "", + data[i]); + } + printk("\n"); +#endif +} + + +static inline void debug_desc(u32 phys, struct desc *desc) +{ +#if DEBUG_DESC + printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X" + " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n", + phys, desc->next, desc->buf_len, desc->pkt_len, + desc->data, desc->dest_id, desc->src_id, desc->flags, + desc->qos, desc->padlen, desc->vlan_tci, + desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2, + desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5, + desc->src_mac_0, desc->src_mac_1, desc->src_mac_2, + desc->src_mac_3, desc->src_mac_4, desc->src_mac_5); +#endif +} + +static inline int queue_get_desc(unsigned int queue, struct port *port, + int is_tx) +{ + u32 phys, tab_phys, n_desc; + struct desc *tab; + + if (!(phys = qmgr_get_entry(queue))) + return -1; + + phys &= ~0x1F; /* mask out non-address bits */ + tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0); + tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0); + n_desc = (phys - tab_phys) / sizeof(struct desc); + BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS)); + debug_desc(phys, &tab[n_desc]); + BUG_ON(tab[n_desc].next); + return n_desc; +} + +static inline void queue_put_desc(unsigned int queue, u32 phys, + struct desc *desc) +{ + debug_desc(phys, desc); + BUG_ON(phys & 0x1F); + qmgr_put_entry(queue, phys); + /* Don't check for queue overflow here, we've allocated sufficient + length and queues >= 32 don't support this check anyway. */ +} + + +static inline void dma_unmap_tx(struct port *port, struct desc *desc) +{ +#ifdef __ARMEB__ + dma_unmap_single(&port->netdev->dev, desc->data, + desc->buf_len, DMA_TO_DEVICE); +#else + dma_unmap_single(&port->netdev->dev, desc->data & ~3, + ALIGN((desc->data & 3) + desc->buf_len, 4), + DMA_TO_DEVICE); +#endif +} + + +static void eth_rx_irq(void *pdev) +{ + struct net_device *dev = pdev; + struct port *port = netdev_priv(dev); + +#if DEBUG_RX + printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name); +#endif + qmgr_disable_irq(port->plat->rxq); + napi_schedule(&port->napi); +} + +static int eth_poll(struct napi_struct *napi, int budget) +{ + struct port *port = container_of(napi, struct port, napi); + struct net_device *dev = port->netdev; + unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id); + int received = 0; + +#if DEBUG_RX + printk(KERN_DEBUG "%s: eth_poll\n", dev->name); +#endif + + while (received < budget) { + struct sk_buff *skb; + struct desc *desc; + int n; +#ifdef __ARMEB__ + struct sk_buff *temp; + u32 phys; +#endif + + if ((n = queue_get_desc(rxq, port, 0)) < 0) { +#if DEBUG_RX + printk(KERN_DEBUG "%s: eth_poll napi_complete\n", + dev->name); +#endif + napi_complete(napi); + qmgr_enable_irq(rxq); + if (!qmgr_stat_below_low_watermark(rxq) && + napi_reschedule(napi)) { /* not empty again */ +#if DEBUG_RX + printk(KERN_DEBUG "%s: eth_poll" + " napi_reschedule successed\n", + dev->name); +#endif + qmgr_disable_irq(rxq); + continue; + } +#if DEBUG_RX + printk(KERN_DEBUG "%s: eth_poll all done\n", + dev->name); +#endif + return received; /* all work done */ + } + + desc = rx_desc_ptr(port, n); + +#ifdef __ARMEB__ + if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) { + phys = dma_map_single(&dev->dev, skb->data, + RX_BUFF_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(&dev->dev, phys)) { + dev_kfree_skb(skb); + skb = NULL; + } + } +#else + skb = netdev_alloc_skb(dev, + ALIGN(NET_IP_ALIGN + desc->pkt_len, 4)); +#endif + + if (!skb) { + dev->stats.rx_dropped++; + /* put the desc back on RX-ready queue */ + desc->buf_len = MAX_MRU; + desc->pkt_len = 0; + queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); + continue; + } + + /* process received frame */ +#ifdef __ARMEB__ + temp = skb; + skb = port->rx_buff_tab[n]; + dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN, + RX_BUFF_SIZE, DMA_FROM_DEVICE); +#else + dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN, + RX_BUFF_SIZE, DMA_FROM_DEVICE); + memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n], + ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4); +#endif + skb_reserve(skb, NET_IP_ALIGN); + skb_put(skb, desc->pkt_len); + + debug_pkt(dev, "eth_poll", skb->data, skb->len); + + ixp_rx_timestamp(port, skb); + skb->protocol = eth_type_trans(skb, dev); + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; + netif_receive_skb(skb); + + /* put the new buffer on RX-free queue */ +#ifdef __ARMEB__ + port->rx_buff_tab[n] = temp; + desc->data = phys + NET_IP_ALIGN; +#endif + desc->buf_len = MAX_MRU; + desc->pkt_len = 0; + queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); + received++; + } + +#if DEBUG_RX + printk(KERN_DEBUG "eth_poll(): end, not all work done\n"); +#endif + return received; /* not all work done */ +} + + +static void eth_txdone_irq(void *unused) +{ + u32 phys; + +#if DEBUG_TX + printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n"); +#endif + while ((phys = qmgr_get_entry(TXDONE_QUEUE)) != 0) { + u32 npe_id, n_desc; + struct port *port; + struct desc *desc; + int start; + + npe_id = phys & 3; + BUG_ON(npe_id >= MAX_NPES); + port = npe_port_tab[npe_id]; + BUG_ON(!port); + phys &= ~0x1F; /* mask out non-address bits */ + n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc); + BUG_ON(n_desc >= TX_DESCS); + desc = tx_desc_ptr(port, n_desc); + debug_desc(phys, desc); + + if (port->tx_buff_tab[n_desc]) { /* not the draining packet */ + port->netdev->stats.tx_packets++; + port->netdev->stats.tx_bytes += desc->pkt_len; + + dma_unmap_tx(port, desc); +#if DEBUG_TX + printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n", + port->netdev->name, port->tx_buff_tab[n_desc]); +#endif + free_buffer_irq(port->tx_buff_tab[n_desc]); + port->tx_buff_tab[n_desc] = NULL; + } + + start = qmgr_stat_below_low_watermark(port->plat->txreadyq); + queue_put_desc(port->plat->txreadyq, phys, desc); + if (start) { /* TX-ready queue was empty */ +#if DEBUG_TX + printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n", + port->netdev->name); +#endif + netif_wake_queue(port->netdev); + } + } +} + +static int eth_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct port *port = netdev_priv(dev); + unsigned int txreadyq = port->plat->txreadyq; + int len, offset, bytes, n; + void *mem; + u32 phys; + struct desc *desc; + +#if DEBUG_TX + printk(KERN_DEBUG "%s: eth_xmit\n", dev->name); +#endif + + if (unlikely(skb->len > MAX_MRU)) { + dev_kfree_skb(skb); + dev->stats.tx_errors++; + return NETDEV_TX_OK; + } + + debug_pkt(dev, "eth_xmit", skb->data, skb->len); + + len = skb->len; +#ifdef __ARMEB__ + offset = 0; /* no need to keep alignment */ + bytes = len; + mem = skb->data; +#else + offset = (int)skb->data & 3; /* keep 32-bit alignment */ + bytes = ALIGN(offset + len, 4); + if (!(mem = kmalloc(bytes, GFP_ATOMIC))) { + dev_kfree_skb(skb); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); +#endif + + phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE); + if (dma_mapping_error(&dev->dev, phys)) { + dev_kfree_skb(skb); +#ifndef __ARMEB__ + kfree(mem); +#endif + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + + n = queue_get_desc(txreadyq, port, 1); + BUG_ON(n < 0); + desc = tx_desc_ptr(port, n); + +#ifdef __ARMEB__ + port->tx_buff_tab[n] = skb; +#else + port->tx_buff_tab[n] = mem; +#endif + desc->data = phys + offset; + desc->buf_len = desc->pkt_len = len; + + /* NPE firmware pads short frames with zeros internally */ + wmb(); + queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc); + + if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */ +#if DEBUG_TX + printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name); +#endif + netif_stop_queue(dev); + /* we could miss TX ready interrupt */ + /* really empty in fact */ + if (!qmgr_stat_below_low_watermark(txreadyq)) { +#if DEBUG_TX + printk(KERN_DEBUG "%s: eth_xmit ready again\n", + dev->name); +#endif + netif_wake_queue(dev); + } + } + +#if DEBUG_TX + printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name); +#endif + + ixp_tx_timestamp(port, skb); + skb_tx_timestamp(skb); + +#ifndef __ARMEB__ + dev_kfree_skb(skb); +#endif + return NETDEV_TX_OK; +} + + +static void eth_set_mcast_list(struct net_device *dev) +{ + struct port *port = netdev_priv(dev); + struct netdev_hw_addr *ha; + u8 diffs[ETH_ALEN], *addr; + int i; + static const u8 allmulti[] = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + if (dev->flags & IFF_ALLMULTI) { + for (i = 0; i < ETH_ALEN; i++) { + __raw_writel(allmulti[i], &port->regs->mcast_addr[i]); + __raw_writel(allmulti[i], &port->regs->mcast_mask[i]); + } + __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN, + &port->regs->rx_control[0]); + return; + } + + if ((dev->flags & IFF_PROMISC) || netdev_mc_empty(dev)) { + __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN, + &port->regs->rx_control[0]); + return; + } + + memset(diffs, 0, ETH_ALEN); + + addr = NULL; + netdev_for_each_mc_addr(ha, dev) { + if (!addr) + addr = ha->addr; /* first MAC address */ + for (i = 0; i < ETH_ALEN; i++) + diffs[i] |= addr[i] ^ ha->addr[i]; + } + + for (i = 0; i < ETH_ALEN; i++) { + __raw_writel(addr[i], &port->regs->mcast_addr[i]); + __raw_writel(~diffs[i], &port->regs->mcast_mask[i]); + } + + __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN, + &port->regs->rx_control[0]); +} + + +static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + struct port *port = netdev_priv(dev); + + if (!netif_running(dev)) + return -EINVAL; + + if (cpu_is_ixp46x() && cmd == SIOCSHWTSTAMP) + return hwtstamp_ioctl(dev, req, cmd); + + return phy_mii_ioctl(port->phydev, req, cmd); +} + +/* ethtool support */ + +static void ixp4xx_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct port *port = netdev_priv(dev); + strcpy(info->driver, DRV_NAME); + snprintf(info->fw_version, sizeof(info->fw_version), "%u:%u:%u:%u", + port->firmware[0], port->firmware[1], + port->firmware[2], port->firmware[3]); + strcpy(info->bus_info, "internal"); +} + +static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct port *port = netdev_priv(dev); + return phy_ethtool_gset(port->phydev, cmd); +} + +static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct port *port = netdev_priv(dev); + return phy_ethtool_sset(port->phydev, cmd); +} + +static int ixp4xx_nway_reset(struct net_device *dev) +{ + struct port *port = netdev_priv(dev); + return phy_start_aneg(port->phydev); +} + +static const struct ethtool_ops ixp4xx_ethtool_ops = { + .get_drvinfo = ixp4xx_get_drvinfo, + .get_settings = ixp4xx_get_settings, + .set_settings = ixp4xx_set_settings, + .nway_reset = ixp4xx_nway_reset, + .get_link = ethtool_op_get_link, +}; + + +static int request_queues(struct port *port) +{ + int err; + + err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0, + "%s:RX-free", port->netdev->name); + if (err) + return err; + + err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0, + "%s:RX", port->netdev->name); + if (err) + goto rel_rxfree; + + err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0, + "%s:TX", port->netdev->name); + if (err) + goto rel_rx; + + err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0, + "%s:TX-ready", port->netdev->name); + if (err) + goto rel_tx; + + /* TX-done queue handles skbs sent out by the NPEs */ + if (!ports_open) { + err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0, + "%s:TX-done", DRV_NAME); + if (err) + goto rel_txready; + } + return 0; + +rel_txready: + qmgr_release_queue(port->plat->txreadyq); +rel_tx: + qmgr_release_queue(TX_QUEUE(port->id)); +rel_rx: + qmgr_release_queue(port->plat->rxq); +rel_rxfree: + qmgr_release_queue(RXFREE_QUEUE(port->id)); + printk(KERN_DEBUG "%s: unable to request hardware queues\n", + port->netdev->name); + return err; +} + +static void release_queues(struct port *port) +{ + qmgr_release_queue(RXFREE_QUEUE(port->id)); + qmgr_release_queue(port->plat->rxq); + qmgr_release_queue(TX_QUEUE(port->id)); + qmgr_release_queue(port->plat->txreadyq); + + if (!ports_open) + qmgr_release_queue(TXDONE_QUEUE); +} + +static int init_queues(struct port *port) +{ + int i; + + if (!ports_open) + if (!(dma_pool = dma_pool_create(DRV_NAME, NULL, + POOL_ALLOC_SIZE, 32, 0))) + return -ENOMEM; + + if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL, + &port->desc_tab_phys))) + return -ENOMEM; + memset(port->desc_tab, 0, POOL_ALLOC_SIZE); + memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */ + memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab)); + + /* Setup RX buffers */ + for (i = 0; i < RX_DESCS; i++) { + struct desc *desc = rx_desc_ptr(port, i); + buffer_t *buff; /* skb or kmalloc()ated memory */ + void *data; +#ifdef __ARMEB__ + if (!(buff = netdev_alloc_skb(port->netdev, RX_BUFF_SIZE))) + return -ENOMEM; + data = buff->data; +#else + if (!(buff = kmalloc(RX_BUFF_SIZE, GFP_KERNEL))) + return -ENOMEM; + data = buff; +#endif + desc->buf_len = MAX_MRU; + desc->data = dma_map_single(&port->netdev->dev, data, + RX_BUFF_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(&port->netdev->dev, desc->data)) { + free_buffer(buff); + return -EIO; + } + desc->data += NET_IP_ALIGN; + port->rx_buff_tab[i] = buff; + } + + return 0; +} + +static void destroy_queues(struct port *port) +{ + int i; + + if (port->desc_tab) { + for (i = 0; i < RX_DESCS; i++) { + struct desc *desc = rx_desc_ptr(port, i); + buffer_t *buff = port->rx_buff_tab[i]; + if (buff) { + dma_unmap_single(&port->netdev->dev, + desc->data - NET_IP_ALIGN, + RX_BUFF_SIZE, DMA_FROM_DEVICE); + free_buffer(buff); + } + } + for (i = 0; i < TX_DESCS; i++) { + struct desc *desc = tx_desc_ptr(port, i); + buffer_t *buff = port->tx_buff_tab[i]; + if (buff) { + dma_unmap_tx(port, desc); + free_buffer(buff); + } + } + dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys); + port->desc_tab = NULL; + } + + if (!ports_open && dma_pool) { + dma_pool_destroy(dma_pool); + dma_pool = NULL; + } +} + +static int eth_open(struct net_device *dev) +{ + struct port *port = netdev_priv(dev); + struct npe *npe = port->npe; + struct msg msg; + int i, err; + + if (!npe_running(npe)) { + err = npe_load_firmware(npe, npe_name(npe), &dev->dev); + if (err) + return err; + + if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) { + printk(KERN_ERR "%s: %s not responding\n", dev->name, + npe_name(npe)); + return -EIO; + } + port->firmware[0] = msg.byte4; + port->firmware[1] = msg.byte5; + port->firmware[2] = msg.byte6; + port->firmware[3] = msg.byte7; + } + + memset(&msg, 0, sizeof(msg)); + msg.cmd = NPE_VLAN_SETRXQOSENTRY; + msg.eth_id = port->id; + msg.byte5 = port->plat->rxq | 0x80; + msg.byte7 = port->plat->rxq << 4; + for (i = 0; i < 8; i++) { + msg.byte3 = i; + if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ")) + return -EIO; + } + + msg.cmd = NPE_EDB_SETPORTADDRESS; + msg.eth_id = PHYSICAL_ID(port->id); + msg.byte2 = dev->dev_addr[0]; + msg.byte3 = dev->dev_addr[1]; + msg.byte4 = dev->dev_addr[2]; + msg.byte5 = dev->dev_addr[3]; + msg.byte6 = dev->dev_addr[4]; + msg.byte7 = dev->dev_addr[5]; + if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC")) + return -EIO; + + memset(&msg, 0, sizeof(msg)); + msg.cmd = NPE_FW_SETFIREWALLMODE; + msg.eth_id = port->id; + if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE")) + return -EIO; + + if ((err = request_queues(port)) != 0) + return err; + + if ((err = init_queues(port)) != 0) { + destroy_queues(port); + release_queues(port); + return err; + } + + port->speed = 0; /* force "link up" message */ + phy_start(port->phydev); + + for (i = 0; i < ETH_ALEN; i++) + __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]); + __raw_writel(0x08, &port->regs->random_seed); + __raw_writel(0x12, &port->regs->partial_empty_threshold); + __raw_writel(0x30, &port->regs->partial_full_threshold); + __raw_writel(0x08, &port->regs->tx_start_bytes); + __raw_writel(0x15, &port->regs->tx_deferral); + __raw_writel(0x08, &port->regs->tx_2part_deferral[0]); + __raw_writel(0x07, &port->regs->tx_2part_deferral[1]); + __raw_writel(0x80, &port->regs->slot_time); + __raw_writel(0x01, &port->regs->int_clock_threshold); + + /* Populate queues with buffers, no failure after this point */ + for (i = 0; i < TX_DESCS; i++) + queue_put_desc(port->plat->txreadyq, + tx_desc_phys(port, i), tx_desc_ptr(port, i)); + + for (i = 0; i < RX_DESCS; i++) + queue_put_desc(RXFREE_QUEUE(port->id), + rx_desc_phys(port, i), rx_desc_ptr(port, i)); + + __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]); + __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]); + __raw_writel(0, &port->regs->rx_control[1]); + __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]); + + napi_enable(&port->napi); + eth_set_mcast_list(dev); + netif_start_queue(dev); + + qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY, + eth_rx_irq, dev); + if (!ports_open) { + qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY, + eth_txdone_irq, NULL); + qmgr_enable_irq(TXDONE_QUEUE); + } + ports_open++; + /* we may already have RX data, enables IRQ */ + napi_schedule(&port->napi); + return 0; +} + +static int eth_close(struct net_device *dev) +{ + struct port *port = netdev_priv(dev); + struct msg msg; + int buffs = RX_DESCS; /* allocated RX buffers */ + int i; + + ports_open--; + qmgr_disable_irq(port->plat->rxq); + napi_disable(&port->napi); + netif_stop_queue(dev); + + while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0) + buffs--; + + memset(&msg, 0, sizeof(msg)); + msg.cmd = NPE_SETLOOPBACK_MODE; + msg.eth_id = port->id; + msg.byte3 = 1; + if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK")) + printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name); + + i = 0; + do { /* drain RX buffers */ + while (queue_get_desc(port->plat->rxq, port, 0) >= 0) + buffs--; + if (!buffs) + break; + if (qmgr_stat_empty(TX_QUEUE(port->id))) { + /* we have to inject some packet */ + struct desc *desc; + u32 phys; + int n = queue_get_desc(port->plat->txreadyq, port, 1); + BUG_ON(n < 0); + desc = tx_desc_ptr(port, n); + phys = tx_desc_phys(port, n); + desc->buf_len = desc->pkt_len = 1; + wmb(); + queue_put_desc(TX_QUEUE(port->id), phys, desc); + } + udelay(1); + } while (++i < MAX_CLOSE_WAIT); + + if (buffs) + printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)" + " left in NPE\n", dev->name, buffs); +#if DEBUG_CLOSE + if (!buffs) + printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i); +#endif + + buffs = TX_DESCS; + while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0) + buffs--; /* cancel TX */ + + i = 0; + do { + while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0) + buffs--; + if (!buffs) + break; + } while (++i < MAX_CLOSE_WAIT); + + if (buffs) + printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) " + "left in NPE\n", dev->name, buffs); +#if DEBUG_CLOSE + if (!buffs) + printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i); +#endif + + msg.byte3 = 0; + if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK")) + printk(KERN_CRIT "%s: unable to disable loopback\n", + dev->name); + + phy_stop(port->phydev); + + if (!ports_open) + qmgr_disable_irq(TXDONE_QUEUE); + destroy_queues(port); + release_queues(port); + return 0; +} + +static const struct net_device_ops ixp4xx_netdev_ops = { + .ndo_open = eth_open, + .ndo_stop = eth_close, + .ndo_start_xmit = eth_xmit, + .ndo_set_multicast_list = eth_set_mcast_list, + .ndo_do_ioctl = eth_ioctl, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int __devinit eth_init_one(struct platform_device *pdev) +{ + struct port *port; + struct net_device *dev; + struct eth_plat_info *plat = pdev->dev.platform_data; + u32 regs_phys; + char phy_id[MII_BUS_ID_SIZE + 3]; + int err; + + if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) { + pr_err("ixp4xx_eth: bad ptp filter\n"); + return -EINVAL; + } + + if (!(dev = alloc_etherdev(sizeof(struct port)))) + return -ENOMEM; + + SET_NETDEV_DEV(dev, &pdev->dev); + port = netdev_priv(dev); + port->netdev = dev; + port->id = pdev->id; + + switch (port->id) { + case IXP4XX_ETH_NPEA: + port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT; + regs_phys = IXP4XX_EthA_BASE_PHYS; + break; + case IXP4XX_ETH_NPEB: + port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; + regs_phys = IXP4XX_EthB_BASE_PHYS; + break; + case IXP4XX_ETH_NPEC: + port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; + regs_phys = IXP4XX_EthC_BASE_PHYS; + break; + default: + err = -ENODEV; + goto err_free; + } + + dev->netdev_ops = &ixp4xx_netdev_ops; + dev->ethtool_ops = &ixp4xx_ethtool_ops; + dev->tx_queue_len = 100; + + netif_napi_add(dev, &port->napi, eth_poll, NAPI_WEIGHT); + + if (!(port->npe = npe_request(NPE_ID(port->id)))) { + err = -EIO; + goto err_free; + } + + port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name); + if (!port->mem_res) { + err = -EBUSY; + goto err_npe_rel; + } + + port->plat = plat; + npe_port_tab[NPE_ID(port->id)] = port; + memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN); + + platform_set_drvdata(pdev, dev); + + __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET, + &port->regs->core_control); + udelay(50); + __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control); + udelay(50); + + snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy); + port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + if (IS_ERR(port->phydev)) { + err = PTR_ERR(port->phydev); + goto err_free_mem; + } + + port->phydev->irq = PHY_POLL; + + if ((err = register_netdev(dev))) + goto err_phy_dis; + + printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy, + npe_name(port->npe)); + + return 0; + +err_phy_dis: + phy_disconnect(port->phydev); +err_free_mem: + npe_port_tab[NPE_ID(port->id)] = NULL; + platform_set_drvdata(pdev, NULL); + release_resource(port->mem_res); +err_npe_rel: + npe_release(port->npe); +err_free: + free_netdev(dev); + return err; +} + +static int __devexit eth_remove_one(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct port *port = netdev_priv(dev); + + unregister_netdev(dev); + phy_disconnect(port->phydev); + npe_port_tab[NPE_ID(port->id)] = NULL; + platform_set_drvdata(pdev, NULL); + npe_release(port->npe); + release_resource(port->mem_res); + free_netdev(dev); + return 0; +} + +static struct platform_driver ixp4xx_eth_driver = { + .driver.name = DRV_NAME, + .probe = eth_init_one, + .remove = eth_remove_one, +}; + +static int __init eth_init_module(void) +{ + int err; + if ((err = ixp4xx_mdio_register())) + return err; + return platform_driver_register(&ixp4xx_eth_driver); +} + +static void __exit eth_cleanup_module(void) +{ + platform_driver_unregister(&ixp4xx_eth_driver); + ixp4xx_mdio_remove(); +} + +MODULE_AUTHOR("Krzysztof Halasa"); +MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:ixp4xx_eth"); +module_init(eth_init_module); +module_exit(eth_cleanup_module); |