diff options
author | Sujith Manoharan <c_manoha@qca.qualcomm.com> | 2015-01-28 17:54:26 +0530 |
---|---|---|
committer | Kalle Valo <kvalo@codeaurora.org> | 2015-01-29 10:33:25 +0200 |
commit | cfbed87b304a517af27c22a7caf2cb345cb063f9 (patch) | |
tree | 1664344ae9033b6d2decf3eec7d4d20f4d96e30d /drivers/net/wireless/ath/ath9k/ar9003_calib.c | |
parent | e4e292f3c7df753926ecb411788057e15154189e (diff) | |
download | linux-cfbed87b304a517af27c22a7caf2cb345cb063f9.tar.gz linux-cfbed87b304a517af27c22a7caf2cb345cb063f9.tar.xz |
ath9k: Enable manual peak detect calibration
On some AR955x/QCA953x boards, noise floor calibration
gets stuck and the cause is a hardware/BB issue. To fix
this, peak detect calibration in the HW is disabled
and is done in the driver instead. There a few differences
with the calibration routine for older chips like
AR9331.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/ar9003_calib.c')
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_calib.c | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 91130c0e31d3..174442beb952 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -1640,8 +1640,14 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah, skip_tx_iqcal: if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { - if (AR_SREV_9330_11(ah)) - ar9003_hw_manual_peak_cal(ah, 0, IS_CHAN_2GHZ(chan)); + if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) { + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->rxchainmask & (1 << i))) + continue; + ar9003_hw_manual_peak_cal(ah, i, + IS_CHAN_2GHZ(chan)); + } + } /* * For non-AR9550 chips, we just trigger AGC calibration |