Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...

1 files changed, 229 insertions, 0 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api.h b/drivers/net/wireless/intel/iwlwifi/fw/api.h
new file mode 100644
index 000000000000..0e107f916ce3
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api.h
@@ -0,0 +1,229 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <linuxwifi@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
+ * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+#ifndef __iwl_fw_api_h__
+#define __iwl_fw_api_h__
+
+/**
+ * DOC: Host command section
+ *
+ * A host command is a command issued by the upper layer to the fw. There are
+ * several versions of fw that have several APIs. The transport layer is
+ * completely agnostic to these differences.
+ * The transport does provide helper functionality (i.e. SYNC / ASYNC mode),
+ */
+#define SEQ_TO_QUEUE(s)	(((s) >> 8) & 0x1f)
+#define QUEUE_TO_SEQ(q)	(((q) & 0x1f) << 8)
+#define SEQ_TO_INDEX(s)	((s) & 0xff)
+#define INDEX_TO_SEQ(i)	((i) & 0xff)
+#define SEQ_RX_FRAME	cpu_to_le16(0x8000)
+
+/*
+ * those functions retrieve specific information from
+ * the id field in the iwl_host_cmd struct which contains
+ * the command id, the group id and the version of the command
+ * and vice versa
+*/
+static inline u8 iwl_cmd_opcode(u32 cmdid)
+{
+	return cmdid & 0xFF;
+}
+
+static inline u8 iwl_cmd_groupid(u32 cmdid)
+{
+	return ((cmdid & 0xFF00) >> 8);
+}
+
+static inline u8 iwl_cmd_version(u32 cmdid)
+{
+	return ((cmdid & 0xFF0000) >> 16);
+}
+
+static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version)
+{
+	return opcode + (groupid << 8) + (version << 16);
+}
+
+/* make u16 wide id out of u8 group and opcode */
+#define WIDE_ID(grp, opcode) (((grp) << 8) | (opcode))
+#define DEF_ID(opcode) ((1 << 8) | (opcode))
+
+/* due to the conversion, this group is special; new groups
+ * should be defined in the appropriate fw-api header files
+ */
+#define IWL_ALWAYS_LONG_GROUP	1
+
+/**
+ * struct iwl_cmd_header
+ *
+ * This header format appears in the beginning of each command sent from the
+ * driver, and each response/notification received from uCode.
+ */
+struct iwl_cmd_header {
+	u8 cmd;		/* Command ID:  REPLY_RXON, etc. */
+	u8 group_id;
+	/*
+	 * The driver sets up the sequence number to values of its choosing.
+	 * uCode does not use this value, but passes it back to the driver
+	 * when sending the response to each driver-originated command, so
+	 * the driver can match the response to the command.  Since the values
+	 * don't get used by uCode, the driver may set up an arbitrary format.
+	 *
+	 * There is one exception:  uCode sets bit 15 when it originates
+	 * the response/notification, i.e. when the response/notification
+	 * is not a direct response to a command sent by the driver.  For
+	 * example, uCode issues REPLY_RX when it sends a received frame
+	 * to the driver; it is not a direct response to any driver command.
+	 *
+	 * The Linux driver uses the following format:
+	 *
+	 *  0:7		tfd index - position within TX queue
+	 *  8:12	TX queue id
+	 *  13:14	reserved
+	 *  15		unsolicited RX or uCode-originated notification
+	 */
+	__le16 sequence;
+} __packed;
+
+/**
+ * struct iwl_cmd_header_wide
+ *
+ * This header format appears in the beginning of each command sent from the
+ * driver, and each response/notification received from uCode.
+ * this is the wide version that contains more information about the command
+ * like length, version and command type
+ */
+struct iwl_cmd_header_wide {
+	u8 cmd;
+	u8 group_id;
+	__le16 sequence;
+	__le16 length;
+	u8 reserved;
+	u8 version;
+} __packed;
+
+/**
+ * iwl_tx_queue_cfg_actions - TXQ config options
+ * @TX_QUEUE_CFG_ENABLE_QUEUE: enable a queue
+ * @TX_QUEUE_CFG_TFD_SHORT_FORMAT: use short TFD format
+ */
+enum iwl_tx_queue_cfg_actions {
+	TX_QUEUE_CFG_ENABLE_QUEUE		= BIT(0),
+	TX_QUEUE_CFG_TFD_SHORT_FORMAT		= BIT(1),
+};
+
+/**
+ * struct iwl_tx_queue_cfg_cmd - txq hw scheduler config command
+ * @sta_id: station id
+ * @tid: tid of the queue
+ * @flags: see &enum iwl_tx_queue_cfg_actions
+ * @cb_size: size of TFD cyclic buffer. Value is exponent - 3.
+ *	Minimum value 0 (8 TFDs), maximum value 5 (256 TFDs)
+ * @byte_cnt_addr: address of byte count table
+ * @tfdq_addr: address of TFD circular buffer
+ */
+struct iwl_tx_queue_cfg_cmd {
+	u8 sta_id;
+	u8 tid;
+	__le16 flags;
+	__le32 cb_size;
+	__le64 byte_cnt_addr;
+	__le64 tfdq_addr;
+} __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_2 */
+
+/**
+ * struct iwl_tx_queue_cfg_rsp - response to txq hw scheduler config
+ * @queue_number: queue number assigned to this RA -TID
+ * @flags: set on failure
+ * @write_pointer: initial value for write pointer
+ */
+struct iwl_tx_queue_cfg_rsp {
+	__le16 queue_number;
+	__le16 flags;
+	__le16 write_pointer;
+	__le16 reserved;
+} __packed; /* TX_QUEUE_CFG_RSP_API_S_VER_2 */
+
+/**
+ * struct iwl_calib_res_notif_phy_db - Receive phy db chunk after calibrations
+ * @type: type of the result - mostly ignored
+ * @length: length of the data
+ * @data: data, length in @length
+ */
+struct iwl_calib_res_notif_phy_db {
+	__le16 type;
+	__le16 length;
+	u8 data[];
+} __packed;
+
+/**
+ * struct iwl_phy_db_cmd - configure operational ucode
+ * @type: type of the data
+ * @length: length of the data
+ * @data: data, length in @length
+ */
+struct iwl_phy_db_cmd {
+	__le16 type;
+	__le16 length;
+	u8 data[];
+} __packed;
+
+#endif /* __iwl_fw_api_h__*/