Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...

1 files changed, 10 insertions, 20 deletions

diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f6e3b86bb0be..a48a8a13d87b 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -43,13 +43,7 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/clk.h>
-
-#include <asm/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/pxa-regs.h>
-#include <mach/regs-uart.h>
-
+#include <linux/io.h>
 
 struct uart_pxa_port {
 	struct uart_port        port;
@@ -491,7 +485,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * Ensure the port will be enabled.
 	 * This is required especially for serial console.
 	 */
-	up->ier |= IER_UUE;
+	up->ier |= UART_IER_UUE;
 
 	/*
 	 * Update the per-port timeout.
@@ -784,19 +778,15 @@ static int serial_pxa_probe(struct platform_device *dev)
 	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
-	/*
-	 * Is it worth keeping this?
-	 */
-	if (mmres->start == __PREG(FFUART))
-		sport->name = "FFUART";
-	else if (mmres->start == __PREG(BTUART))
-		sport->name = "BTUART";
-	else if (mmres->start == __PREG(STUART))
-		sport->name = "STUART";
-	else if (mmres->start == __PREG(HWUART))
-		sport->name = "HWUART";
-	else
+	switch (dev->id) {
+	case 0: sport->name = "FFUART"; break;
+	case 1: sport->name = "BTUART"; break;
+	case 2: sport->name = "STUART"; break;
+	case 3: sport->name = "HWUART"; break;
+	default:
 		sport->name = "???";
+		break;
+	}
 
 	sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
 	if (!sport->port.membase) {