Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...

1 files changed, 280 insertions, 336 deletions

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f435575c4e6e..8e6faaf3580c 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -190,9 +190,6 @@ static const struct divisor_table_entry divisor_table[] = {
 	{   230400,	1},
 };
 
-/* local variables */
-static bool debug;
-
 /* Number of outstanding Command Write Urbs */
 static atomic_t CmdUrbs = ATOMIC_INIT(0);
 
@@ -244,7 +241,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 				__u8 lsr, __u8 data);
 static int  send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command,
 				__u8 param);
-static int  calc_baud_rate_divisor(int baud_rate, int *divisor);
+static int  calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor);
 static int  send_cmd_write_baud_rate(struct edgeport_port *edge_port,
 				int baudRate);
 static void change_port_settings(struct tty_struct *tty,
@@ -286,6 +283,7 @@ static void unicode_to_ascii(char *string, int buflen,
  ************************************************************************/
 static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 {
+	struct device *dev = &edge_serial->serial->dev->dev;
 	__u32 BootCurVer;
 	__u32 BootNewVer;
 	__u8 BootMajorVersion;
@@ -311,7 +309,7 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 	response = request_ihex_firmware(&fw, fw_name,
 					 &edge_serial->serial->dev->dev);
 	if (response) {
-		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+		dev_err(dev, "Failed to load image \"%s\" err %d\n",
 		       fw_name, response);
 		return;
 	}
@@ -330,20 +328,20 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 		     (BootMinorVersion << 16) +
 		      BootBuildNumber;
 
-	dbg("Current Boot Image version %d.%d.%d",
+	dev_dbg(dev, "Current Boot Image version %d.%d.%d\n",
 	    edge_serial->boot_descriptor.MajorVersion,
 	    edge_serial->boot_descriptor.MinorVersion,
 	    le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
 
 
 	if (BootNewVer > BootCurVer) {
-		dbg("**Update Boot Image from %d.%d.%d to %d.%d.%d",
+		dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n",
 		    edge_serial->boot_descriptor.MajorVersion,
 		    edge_serial->boot_descriptor.MinorVersion,
 		    le16_to_cpu(edge_serial->boot_descriptor.BuildNumber),
 		    BootMajorVersion, BootMinorVersion, BootBuildNumber);
 
-		dbg("Downloading new Boot Image");
+		dev_dbg(dev, "Downloading new Boot Image\n");
 
 		for (rec = ihex_next_binrec(rec); rec;
 		     rec = ihex_next_binrec(rec)) {
@@ -362,7 +360,7 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 			}
 		}
 	} else {
-		dbg("Boot Image -- already up to date");
+		dev_dbg(dev, "Boot Image -- already up to date\n");
 	}
 	release_firmware(fw);
 }
@@ -379,7 +377,7 @@ static int get_string_desc(struct usb_device *dev, int Id,
 	struct usb_string_descriptor StringDesc;
 	struct usb_string_descriptor *pStringDesc;
 
-	dbg("%s - USB String ID = %d", __func__, Id);
+	dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id);
 
 	if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc,
 						sizeof(StringDesc)))
@@ -400,34 +398,39 @@ static int get_string_desc(struct usb_device *dev, int Id,
 }
 #endif
 
-static void dump_product_info(struct edgeport_product_info *product_info)
+static void dump_product_info(struct edgeport_serial *edge_serial,
+			      struct edgeport_product_info *product_info)
 {
+	struct device *dev = &edge_serial->serial->dev->dev;
+
 	/* Dump Product Info structure */
-	dbg("**Product Information:");
-	dbg("  ProductId             %x", product_info->ProductId);
-	dbg("  NumPorts              %d", product_info->NumPorts);
-	dbg("  ProdInfoVer           %d", product_info->ProdInfoVer);
-	dbg("  IsServer              %d", product_info->IsServer);
-	dbg("  IsRS232               %d", product_info->IsRS232);
-	dbg("  IsRS422               %d", product_info->IsRS422);
-	dbg("  IsRS485               %d", product_info->IsRS485);
-	dbg("  RomSize               %d", product_info->RomSize);
-	dbg("  RamSize               %d", product_info->RamSize);
-	dbg("  CpuRev                %x", product_info->CpuRev);
-	dbg("  BoardRev              %x", product_info->BoardRev);
-	dbg("  BootMajorVersion      %d.%d.%d", product_info->BootMajorVersion,
-	    product_info->BootMinorVersion,
-	    le16_to_cpu(product_info->BootBuildNumber));
-	dbg("  FirmwareMajorVersion  %d.%d.%d",
-			product_info->FirmwareMajorVersion,
-			product_info->FirmwareMinorVersion,
-			le16_to_cpu(product_info->FirmwareBuildNumber));
-	dbg("  ManufactureDescDate   %d/%d/%d",
-			product_info->ManufactureDescDate[0],
-			product_info->ManufactureDescDate[1],
-			product_info->ManufactureDescDate[2]+1900);
-	dbg("  iDownloadFile         0x%x", product_info->iDownloadFile);
-	dbg("  EpicVer               %d", product_info->EpicVer);
+	dev_dbg(dev, "**Product Information:\n");
+	dev_dbg(dev, "  ProductId             %x\n", product_info->ProductId);
+	dev_dbg(dev, "  NumPorts              %d\n", product_info->NumPorts);
+	dev_dbg(dev, "  ProdInfoVer           %d\n", product_info->ProdInfoVer);
+	dev_dbg(dev, "  IsServer              %d\n", product_info->IsServer);
+	dev_dbg(dev, "  IsRS232               %d\n", product_info->IsRS232);
+	dev_dbg(dev, "  IsRS422               %d\n", product_info->IsRS422);
+	dev_dbg(dev, "  IsRS485               %d\n", product_info->IsRS485);
+	dev_dbg(dev, "  RomSize               %d\n", product_info->RomSize);
+	dev_dbg(dev, "  RamSize               %d\n", product_info->RamSize);
+	dev_dbg(dev, "  CpuRev                %x\n", product_info->CpuRev);
+	dev_dbg(dev, "  BoardRev              %x\n", product_info->BoardRev);
+	dev_dbg(dev, "  BootMajorVersion      %d.%d.%d\n",
+		product_info->BootMajorVersion,
+		product_info->BootMinorVersion,
+		le16_to_cpu(product_info->BootBuildNumber));
+	dev_dbg(dev, "  FirmwareMajorVersion  %d.%d.%d\n",
+		product_info->FirmwareMajorVersion,
+		product_info->FirmwareMinorVersion,
+		le16_to_cpu(product_info->FirmwareBuildNumber));
+	dev_dbg(dev, "  ManufactureDescDate   %d/%d/%d\n",
+		product_info->ManufactureDescDate[0],
+		product_info->ManufactureDescDate[1],
+		product_info->ManufactureDescDate[2]+1900);
+	dev_dbg(dev, "  iDownloadFile         0x%x\n",
+		product_info->iDownloadFile);
+	dev_dbg(dev, "  EpicVer               %d\n", product_info->EpicVer);
 }
 
 static void get_product_info(struct edgeport_serial *edge_serial)
@@ -462,7 +465,7 @@ static void get_product_info(struct edgeport_serial *edge_serial)
 		product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251;
 	else
 		product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930;
- 
+
 	/* Determine Product type and set appropriate flags */
 	switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) {
 	case ION_DEVICE_ID_EDGEPORT_COMPATIBLE:
@@ -490,7 +493,7 @@ static void get_product_info(struct edgeport_serial *edge_serial)
 		break;
 	}
 
-	dump_product_info(product_info);
+	dump_product_info(edge_serial, product_info);
 }
 
 static int get_epic_descriptor(struct edgeport_serial *ep)
@@ -500,6 +503,7 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 	struct edgeport_product_info *product_info = &ep->product_info;
 	struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
 	struct edge_compatibility_bits *bits;
+	struct device *dev = &serial->dev->dev;
 
 	ep->is_epic = 0;
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
@@ -509,8 +513,6 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 				 sizeof(struct edge_compatibility_descriptor),
 				 300);
 
-	dbg("%s result = %d", __func__, result);
-
 	if (result > 0) {
 		ep->is_epic = 1;
 		memset(product_info, 0, sizeof(struct edgeport_product_info));
@@ -524,23 +526,23 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
 		product_info->EpicVer = epic->EpicVer;
 		product_info->Epic = epic->Supports;
 		product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
-		dump_product_info(product_info);
+		dump_product_info(ep, product_info);
 
 		bits = &ep->epic_descriptor.Supports;
-		dbg("**EPIC descriptor:");
-		dbg("  VendEnableSuspend: %s", bits->VendEnableSuspend	? "TRUE": "FALSE");
-		dbg("  IOSPOpen         : %s", bits->IOSPOpen		? "TRUE": "FALSE");
-		dbg("  IOSPClose        : %s", bits->IOSPClose		? "TRUE": "FALSE");
-		dbg("  IOSPChase        : %s", bits->IOSPChase		? "TRUE": "FALSE");
-		dbg("  IOSPSetRxFlow    : %s", bits->IOSPSetRxFlow	? "TRUE": "FALSE");
-		dbg("  IOSPSetTxFlow    : %s", bits->IOSPSetTxFlow	? "TRUE": "FALSE");
-		dbg("  IOSPSetXChar     : %s", bits->IOSPSetXChar	? "TRUE": "FALSE");
-		dbg("  IOSPRxCheck      : %s", bits->IOSPRxCheck	? "TRUE": "FALSE");
-		dbg("  IOSPSetClrBreak  : %s", bits->IOSPSetClrBreak	? "TRUE": "FALSE");
-		dbg("  IOSPWriteMCR     : %s", bits->IOSPWriteMCR	? "TRUE": "FALSE");
-		dbg("  IOSPWriteLCR     : %s", bits->IOSPWriteLCR	? "TRUE": "FALSE");
-		dbg("  IOSPSetBaudRate  : %s", bits->IOSPSetBaudRate	? "TRUE": "FALSE");
-		dbg("  TrueEdgeport     : %s", bits->TrueEdgeport	? "TRUE": "FALSE");
+		dev_dbg(dev, "**EPIC descriptor:\n");
+		dev_dbg(dev, "  VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPOpen         : %s\n", bits->IOSPOpen	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPClose        : %s\n", bits->IOSPClose	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPChase        : %s\n", bits->IOSPChase	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetRxFlow    : %s\n", bits->IOSPSetRxFlow	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetTxFlow    : %s\n", bits->IOSPSetTxFlow	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetXChar     : %s\n", bits->IOSPSetXChar	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPRxCheck      : %s\n", bits->IOSPRxCheck	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetClrBreak  : %s\n", bits->IOSPSetClrBreak	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPWriteMCR     : %s\n", bits->IOSPWriteMCR	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPWriteLCR     : %s\n", bits->IOSPWriteLCR	? "TRUE": "FALSE");
+		dev_dbg(dev, "  IOSPSetBaudRate  : %s\n", bits->IOSPSetBaudRate	? "TRUE": "FALSE");
+		dev_dbg(dev, "  TrueEdgeport     : %s\n", bits->TrueEdgeport	? "TRUE": "FALSE");
 	}
 
 	return result;
@@ -561,7 +563,8 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
  *****************************************************************************/
 static void edge_interrupt_callback(struct urb *urb)
 {
-	struct edgeport_serial	*edge_serial = urb->context;
+	struct edgeport_serial *edge_serial = urb->context;
+	struct device *dev;
 	struct edgeport_port *edge_port;
 	struct usb_serial_port *port;
 	struct tty_struct *tty;
@@ -574,8 +577,6 @@ static void edge_interrupt_callback(struct urb *urb)
 	int result;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -584,36 +585,42 @@ static void edge_interrupt_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-						__func__, status);
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__, status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
 		goto exit;
 	}
 
+	dev = &edge_serial->serial->dev->dev;
+
 	/* process this interrupt-read even if there are no ports open */
 	if (length) {
-		usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
-						__func__, length, data);
+		usb_serial_debug_data(dev, __func__, length, data);
 
 		if (length > 1) {
 			bytes_avail = data[0] | (data[1] << 8);
 			if (bytes_avail) {
 				spin_lock(&edge_serial->es_lock);
 				edge_serial->rxBytesAvail += bytes_avail;
-				dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress);
+				dev_dbg(dev,
+					"%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n",
+					__func__, bytes_avail,
+					edge_serial->rxBytesAvail,
+					edge_serial->read_in_progress);
 
 				if (edge_serial->rxBytesAvail > 0 &&
 				    !edge_serial->read_in_progress) {
-					dbg("%s - posting a read", __func__);
+					dev_dbg(dev, "%s - posting a read\n", __func__);
 					edge_serial->read_in_progress = true;
 
 					/* we have pending bytes on the
 					   bulk in pipe, send a request */
 					result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 					if (result) {
-						dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
+						dev_err(dev,
+							"%s - usb_submit_urb(read bulk) failed with result = %d\n",
+							__func__, result);
 						edge_serial->read_in_progress = false;
 					}
 				}
@@ -633,9 +640,9 @@ static void edge_interrupt_callback(struct urb *urb)
 					spin_lock(&edge_port->ep_lock);
 					edge_port->txCredits += txCredits;
 					spin_unlock(&edge_port->ep_lock);
-					dbg("%s - txcredits for port%d = %d",
-							__func__, portNumber,
-							edge_port->txCredits);
+					dev_dbg(dev, "%s - txcredits for port%d = %d\n",
+						__func__, portNumber,
+						edge_port->txCredits);
 
 					/* tell the tty driver that something
 					   has changed */
@@ -673,49 +680,48 @@ exit:
 static void edge_bulk_in_callback(struct urb *urb)
 {
 	struct edgeport_serial	*edge_serial = urb->context;
+	struct device *dev;
 	unsigned char		*data = urb->transfer_buffer;
 	int			retval;
 	__u16			raw_data_length;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n",
+			__func__, status);
 		edge_serial->read_in_progress = false;
 		return;
 	}
 
 	if (urb->actual_length == 0) {
-		dbg("%s - read bulk callback with no data", __func__);
+		dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__);
 		edge_serial->read_in_progress = false;
 		return;
 	}
 
+	dev = &edge_serial->serial->dev->dev;
 	raw_data_length = urb->actual_length;
 
-	usb_serial_debug_data(debug, &edge_serial->serial->dev->dev,
-					__func__, raw_data_length, data);
+	usb_serial_debug_data(dev, __func__, raw_data_length, data);
 
 	spin_lock(&edge_serial->es_lock);
 
 	/* decrement our rxBytes available by the number that we just got */
 	edge_serial->rxBytesAvail -= raw_data_length;
 
-	dbg("%s - Received = %d, rxBytesAvail %d", __func__,
-				raw_data_length, edge_serial->rxBytesAvail);
+	dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__,
+		raw_data_length, edge_serial->rxBytesAvail);
 
 	process_rcvd_data(edge_serial, data, urb->actual_length);
 
 	/* check to see if there's any more data for us to read */
 	if (edge_serial->rxBytesAvail > 0) {
-		dbg("%s - posting a read", __func__);
+		dev_dbg(dev, "%s - posting a read\n", __func__);
 		retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
 		if (retval) {
-			dev_err(&urb->dev->dev,
-				"%s - usb_submit_urb(read bulk) failed, "
-				"retval = %d\n", __func__, retval);
+			dev_err(dev,
+				"%s - usb_submit_urb(read bulk) failed, retval = %d\n",
+				__func__, retval);
 			edge_serial->read_in_progress = false;
 		}
 	} else {
@@ -737,11 +743,10 @@ static void edge_bulk_out_data_callback(struct urb *urb)
 	struct tty_struct *tty;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
+		dev_dbg(&urb->dev->dev,
+			"%s - nonzero write bulk status received: %d\n",
+			__func__, status);
 	}
 
 	tty = tty_port_tty_get(&edge_port->port->port);
@@ -773,11 +778,9 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
 	struct tty_struct *tty;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	atomic_dec(&CmdUrbs);
-	dbg("%s - FREE URB %p (outstanding %d)", __func__,
-					urb, atomic_read(&CmdUrbs));
+	dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n",
+		__func__, urb, atomic_read(&CmdUrbs));
 
 
 	/* clean up the transfer buffer */
@@ -787,8 +790,9 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
 	usb_free_urb(urb);
 
 	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-							__func__, status);
+		dev_dbg(&urb->dev->dev,
+			"%s - nonzero write bulk status received: %d\n",
+			__func__, status);
 		return;
 	}
 
@@ -819,12 +823,11 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
 	struct usb_serial *serial;
 	struct edgeport_serial *edge_serial;
 	int response;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (edge_port == NULL)
 		return -ENODEV;
 
@@ -875,9 +878,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 		response = usb_submit_urb(edge_serial->interrupt_read_urb,
 								GFP_KERNEL);
 		if (response) {
-			dev_err(&port->dev,
-				"%s - Error %d submitting control urb\n",
-							__func__, response);
+			dev_err(dev, "%s - Error %d submitting control urb\n",
+				__func__, response);
 		}
 	}
 
@@ -902,8 +904,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0);
 
 	if (response < 0) {
-		dev_err(&port->dev, "%s - error sending open port command\n",
-								__func__);
+		dev_err(dev, "%s - error sending open port command\n", __func__);
 		edge_port->openPending = false;
 		return -ENODEV;
 	}
@@ -914,7 +915,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	if (!edge_port->open) {
 		/* open timed out */
-		dbg("%s - open timedout", __func__);
+		dev_dbg(dev, "%s - open timedout\n", __func__);
 		edge_port->openPending = false;
 		return -ENODEV;
 	}
@@ -927,7 +928,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	edge_port->txfifo.fifo	= kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
 
 	if (!edge_port->txfifo.fifo) {
-		dbg("%s - no memory", __func__);
+		dev_dbg(dev, "%s - no memory\n", __func__);
 		edge_close(port);
 		return -ENOMEM;
 	}
@@ -937,15 +938,13 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	edge_port->write_in_progress = false;
 
 	if (!edge_port->write_urb) {
-		dbg("%s - no memory", __func__);
+		dev_dbg(dev, "%s - no memory\n", __func__);
 		edge_close(port);
 		return -ENOMEM;
 	}
 
-	dbg("%s(%d) - Initialize TX fifo to %d bytes",
-			__func__, port->number, edge_port->maxTxCredits);
-
-	dbg("%s exited", __func__);
+	dev_dbg(dev, "%s(%d) - Initialize TX fifo to %d bytes\n",
+		__func__, port->number, edge_port->maxTxCredits);
 
 	return 0;
 }
@@ -963,6 +962,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
  ************************************************************************/
 static void block_until_chase_response(struct edgeport_port *edge_port)
 {
+	struct device *dev = &edge_port->port->dev;
 	DEFINE_WAIT(wait);
 	__u16 lastCredits;
 	int timeout = 1*HZ;
@@ -974,11 +974,11 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
 
 		/* Did we get our Chase response */
 		if (!edge_port->chaseResponsePending) {
-			dbg("%s - Got Chase Response", __func__);
+			dev_dbg(dev, "%s - Got Chase Response\n", __func__);
 
 			/* did we get all of our credit back? */
 			if (edge_port->txCredits == edge_port->maxTxCredits) {
-				dbg("%s - Got all credits", __func__);
+				dev_dbg(dev, "%s - Got all credits\n", __func__);
 				return;
 			}
 		}
@@ -994,12 +994,12 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
 			loop--;
 			if (loop == 0) {
 				edge_port->chaseResponsePending = false;
-				dbg("%s - Chase TIMEOUT", __func__);
+				dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__);
 				return;
 			}
 		} else {
 			/* Reset timeout value back to 10 seconds */
-			dbg("%s - Last %d, Current %d", __func__,
+			dev_dbg(dev, "%s - Last %d, Current %d\n", __func__,
 					lastCredits, edge_port->txCredits);
 			loop = 10;
 		}
@@ -1019,6 +1019,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
  ************************************************************************/
 static void block_until_tx_empty(struct edgeport_port *edge_port)
 {
+	struct device *dev = &edge_port->port->dev;
 	DEFINE_WAIT(wait);
 	struct TxFifo *fifo = &edge_port->txfifo;
 	__u32 lastCount;
@@ -1031,7 +1032,7 @@ static void block_until_tx_empty(struct edgeport_port *edge_port)
 
 		/* Is the Edgeport Buffer empty? */
 		if (lastCount == 0) {
-			dbg("%s - TX Buffer Empty", __func__);
+			dev_dbg(dev, "%s - TX Buffer Empty\n", __func__);
 			return;
 		}
 
@@ -1041,13 +1042,13 @@ static void block_until_tx_empty(struct edgeport_port *edge_port)
 		schedule_timeout(timeout);
 		finish_wait(&edge_port->wait_chase, &wait);
 
-		dbg("%s wait", __func__);
+		dev_dbg(dev, "%s wait\n", __func__);
 
 		if (lastCount == fifo->count) {
 			/* No activity.. count down. */
 			loop--;
 			if (loop == 0) {
-				dbg("%s - TIMEOUT", __func__);
+				dev_dbg(dev, "%s - TIMEOUT\n", __func__);
 				return;
 			}
 		} else {
@@ -1068,8 +1069,6 @@ static void edge_close(struct usb_serial_port *port)
 	struct edgeport_port *edge_port;
 	int status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	edge_serial = usb_get_serial_data(port->serial);
 	edge_port = usb_get_serial_port_data(port);
 	if (edge_serial == NULL || edge_port == NULL)
@@ -1086,7 +1085,7 @@ static void edge_close(struct usb_serial_port *port)
 		/* flush and chase */
 		edge_port->chaseResponsePending = true;
 
-		dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
+		dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__);
 		status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
 		if (status == 0)
 			/* block until chase finished */
@@ -1099,7 +1098,7 @@ static void edge_close(struct usb_serial_port *port)
 	    ((edge_serial->is_epic) &&
 	     (edge_serial->epic_descriptor.Supports.IOSPClose))) {
 	       /* close the port */
-		dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__);
+		dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__);
 		send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
 	}
 
@@ -1119,8 +1118,6 @@ static void edge_close(struct usb_serial_port *port)
 	}
 	kfree(edge_port->txfifo.fifo);
 	edge_port->txfifo.fifo = NULL;
-
-	dbg("%s exited", __func__);
 }
 
 /*****************************************************************************
@@ -1141,8 +1138,6 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 	int secondhalf;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (edge_port == NULL)
 		return -ENODEV;
 
@@ -1155,14 +1150,14 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 	copySize = min((unsigned int)count,
 				(edge_port->txCredits - fifo->count));
 
-	dbg("%s(%d) of %d byte(s) Fifo room  %d -- will copy %d bytes",
-			__func__, port->number, count,
+	dev_dbg(&port->dev, "%s(%d) of %d byte(s) Fifo room  %d -- will copy %d bytes\n",
+		__func__, port->number, count,
 			edge_port->txCredits - fifo->count, copySize);
 
 	/* catch writes of 0 bytes which the tty driver likes to give us,
 	   and when txCredits is empty */
 	if (copySize == 0) {
-		dbg("%s - copySize = Zero", __func__);
+		dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__);
 		goto finish_write;
 	}
 
@@ -1175,13 +1170,12 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 	 */
 	bytesleft = fifo->size - fifo->head;
 	firsthalf = min(bytesleft, copySize);
-	dbg("%s - copy %d bytes of %d into fifo ", __func__,
-					firsthalf, bytesleft);
+	dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__,
+		firsthalf, bytesleft);
 
 	/* now copy our data */
 	memcpy(&fifo->fifo[fifo->head], data, firsthalf);
-	usb_serial_debug_data(debug, &port->dev, __func__,
-					firsthalf, &fifo->fifo[fifo->head]);
+	usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]);
 
 	/* update the index and size */
 	fifo->head  += firsthalf;
@@ -1194,10 +1188,9 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 	secondhalf = copySize-firsthalf;
 
 	if (secondhalf) {
-		dbg("%s - copy rest of data %d", __func__, secondhalf);
+		dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf);
 		memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
-		usb_serial_debug_data(debug, &port->dev, __func__,
-					secondhalf, &fifo->fifo[fifo->head]);
+		usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]);
 		/* update the index and size */
 		fifo->count += secondhalf;
 		fifo->head  += secondhalf;
@@ -1212,8 +1205,8 @@ finish_write:
 	send_more_port_data((struct edgeport_serial *)
 			usb_get_serial_data(port->serial), edge_port);
 
-	dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__,
-				copySize, edge_port->txCredits, fifo->count);
+	dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n",
+		__func__, copySize, edge_port->txCredits, fifo->count);
 
 	return copySize;
 }
@@ -1236,6 +1229,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 					struct edgeport_port *edge_port)
 {
 	struct TxFifo	*fifo = &edge_port->txfifo;
+	struct device	*dev = &edge_port->port->dev;
 	struct urb	*urb;
 	unsigned char	*buffer;
 	int		status;
@@ -1245,16 +1239,14 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 	int		secondhalf;
 	unsigned long	flags;
 
-	dbg("%s(%d)", __func__, edge_port->port->number);
-
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
 
 	if (edge_port->write_in_progress ||
 	    !edge_port->open             ||
 	    (fifo->count == 0)) {
-		dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d",
-				__func__, edge_port->port->number,
-				fifo->count, edge_port->write_in_progress);
+		dev_dbg(dev, "%s(%d) EXIT - fifo %d, PendingWrite = %d\n",
+			__func__, edge_port->port->number,
+			fifo->count, edge_port->write_in_progress);
 		goto exit_send;
 	}
 
@@ -1266,7 +1258,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 	 * it's better to wait for more credits so we can do a larger write.
 	 */
 	if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) {
-		dbg("%s(%d) Not enough credit - fifo %d TxCredit %d",
+		dev_dbg(dev, "%s(%d) Not enough credit - fifo %d TxCredit %d\n",
 			__func__, edge_port->port->number, fifo->count,
 			edge_port->txCredits);
 		goto exit_send;
@@ -1315,8 +1307,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 	}
 
 	if (count)
-		usb_serial_debug_data(debug, &edge_port->port->dev,
-						__func__, count, &buffer[2]);
+		usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]);
 
 	/* fill up the urb with all of our data and submit it */
 	usb_fill_bulk_urb(urb, edge_serial->serial->dev,
@@ -1341,8 +1332,8 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 		edge_port->txCredits += count;
 		edge_port->icount.tx -= count;
 	}
-	dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d",
-			__func__, count, edge_port->txCredits, fifo->count);
+	dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n",
+		__func__, count, edge_port->txCredits, fifo->count);
 
 exit_send:
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
@@ -1363,17 +1354,13 @@ static int edge_write_room(struct tty_struct *tty)
 	int room;
 	unsigned long flags;
 
-	dbg("%s", __func__);
-
 	if (edge_port == NULL)
 		return 0;
 	if (edge_port->closePending)
 		return 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (!edge_port->open) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
 		return 0;
 	}
 
@@ -1382,7 +1369,7 @@ static int edge_write_room(struct tty_struct *tty)
 	room = edge_port->txCredits - edge_port->txfifo.count;
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
-	dbg("%s - returns %d", __func__, room);
+	dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
 	return room;
 }
 
@@ -1403,15 +1390,13 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
 	int num_chars;
 	unsigned long flags;
 
-	dbg("%s", __func__);
-
 	if (edge_port == NULL)
 		return 0;
 	if (edge_port->closePending)
 		return 0;
 
 	if (!edge_port->open) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
 		return 0;
 	}
 
@@ -1420,8 +1405,8 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
 						edge_port->txfifo.count;
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 	if (num_chars) {
-		dbg("%s(port %d) - returns %d", __func__,
-						port->number, num_chars);
+		dev_dbg(&port->dev, "%s(port %d) - returns %d\n", __func__,
+			port->number, num_chars);
 	}
 
 	return num_chars;
@@ -1439,13 +1424,11 @@ static void edge_throttle(struct tty_struct *tty)
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (edge_port == NULL)
 		return;
 
 	if (!edge_port->open) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
 		return;
 	}
 
@@ -1479,13 +1462,11 @@ static void edge_unthrottle(struct tty_struct *tty)
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (edge_port == NULL)
 		return;
 
 	if (!edge_port->open) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
 		return;
 	}
 
@@ -1517,18 +1498,14 @@ static void edge_set_termios(struct tty_struct *tty,
 	unsigned int cflag;
 
 	cflag = tty->termios.c_cflag;
-	dbg("%s - clfag %08x iflag %08x", __func__,
-	    tty->termios.c_cflag, tty->termios.c_iflag);
-	dbg("%s - old clfag %08x old iflag %08x", __func__,
-	    old_termios->c_cflag, old_termios->c_iflag);
-
-	dbg("%s - port %d", __func__, port->number);
+	dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag);
+	dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag);
 
 	if (edge_port == NULL)
 		return;
 
 	if (!edge_port->open) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
 		return;
 	}
 
@@ -1556,7 +1533,7 @@ static int get_lsr_info(struct edgeport_port *edge_port,
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
 	if (edge_port->maxTxCredits == edge_port->txCredits &&
 	    edge_port->txfifo.count == 0) {
-		dbg("%s -- Empty", __func__);
+		dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__);
 		result = TIOCSER_TEMT;
 	}
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
@@ -1573,8 +1550,6 @@ static int edge_tiocmset(struct tty_struct *tty,
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int mcr;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	mcr = edge_port->shadowMCR;
 	if (set & TIOCM_RTS)
 		mcr |= MCR_RTS;
@@ -1605,8 +1580,6 @@ static int edge_tiocmget(struct tty_struct *tty)
 	unsigned int msr;
 	unsigned int mcr;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	msr = edge_port->shadowMSR;
 	mcr = edge_port->shadowMCR;
 	result = ((mcr & MCR_DTR)	? TIOCM_DTR: 0)	  /* 0x002 */
@@ -1616,9 +1589,6 @@ static int edge_tiocmget(struct tty_struct *tty)
 		  | ((msr & EDGEPORT_MSR_RI)	? TIOCM_RI:  0)   /* 0x080 */
 		  | ((msr & EDGEPORT_MSR_DSR)	? TIOCM_DSR: 0);  /* 0x100 */
 
-
-	dbg("%s -- %x", __func__, result);
-
 	return result;
 }
 
@@ -1642,8 +1612,8 @@ static int edge_get_icount(struct tty_struct *tty,
 	icount->brk = cnow.brk;
 	icount->buf_overrun = cnow.buf_overrun;
 
-	dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
-			__func__,  port->number, icount->rx, icount->tx);
+	dev_dbg(&port->dev, "%s (%d) TIOCGICOUNT RX=%d, TX=%d\n", __func__,
+		port->number, icount->rx, icount->tx);
 	return 0;
 }
 
@@ -1686,19 +1656,19 @@ static int edge_ioctl(struct tty_struct *tty,
 	struct async_icount cnow;
 	struct async_icount cprev;
 
-	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+	dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd);
 
 	switch (cmd) {
 	case TIOCSERGETLSR:
-		dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
+		dev_dbg(&port->dev, "%s (%d) TIOCSERGETLSR\n", __func__,  port->number);
 		return get_lsr_info(edge_port, (unsigned int __user *) arg);
 
 	case TIOCGSERIAL:
-		dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
+		dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__,  port->number);
 		return get_serial_info(edge_port, (struct serial_struct __user *) arg);
 
 	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,  port->number);
 		cprev = edge_port->icount;
 		while (1) {
 			prepare_to_wait(&edge_port->delta_msr_wait,
@@ -1745,7 +1715,7 @@ static void edge_break(struct tty_struct *tty, int break_state)
 		/* flush and chase */
 		edge_port->chaseResponsePending = true;
 
-		dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
+		dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__);
 		status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0);
 		if (status == 0) {
 			/* block until chase finished */
@@ -1759,16 +1729,16 @@ static void edge_break(struct tty_struct *tty, int break_state)
 	    ((edge_serial->is_epic) &&
 	     (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
 		if (break_state == -1) {
-			dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__);
+			dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__);
 			status = send_iosp_ext_cmd(edge_port,
 						IOSP_CMD_SET_BREAK, 0);
 		} else {
-			dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__);
+			dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__);
 			status = send_iosp_ext_cmd(edge_port,
 						IOSP_CMD_CLEAR_BREAK, 0);
 		}
 		if (status)
-			dbg("%s - error sending break set/clear command.",
+			dev_dbg(&port->dev, "%s - error sending break set/clear command.\n",
 				__func__);
 	}
 }
@@ -1781,20 +1751,19 @@ static void edge_break(struct tty_struct *tty, int break_state)
 static void process_rcvd_data(struct edgeport_serial *edge_serial,
 				unsigned char *buffer, __u16 bufferLength)
 {
+	struct device *dev = &edge_serial->serial->dev->dev;
 	struct usb_serial_port *port;
 	struct edgeport_port *edge_port;
 	struct tty_struct *tty;
 	__u16 lastBufferLength;
 	__u16 rxLen;
 
-	dbg("%s", __func__);
-
 	lastBufferLength = bufferLength + 1;
 
 	while (bufferLength > 0) {
 		/* failsafe incase we get a message that we don't understand */
 		if (lastBufferLength == bufferLength) {
-			dbg("%s - stuck in loop, exiting it.", __func__);
+			dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__);
 			break;
 		}
 		lastBufferLength = bufferLength;
@@ -1815,8 +1784,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
 			++buffer;
 			--bufferLength;
 
-			dbg("%s - Hdr1=%02X Hdr2=%02X", __func__,
-			    edge_serial->rxHeader1, edge_serial->rxHeader2);
+			dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__,
+				edge_serial->rxHeader1, edge_serial->rxHeader2);
 			/* Process depending on whether this header is
 			 * data or status */
 
@@ -1855,10 +1824,10 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
 				    IOSP_GET_HDR_DATA_LEN(
 						edge_serial->rxHeader1,
 						edge_serial->rxHeader2);
-				dbg("%s - Data for Port %u Len %u",
-						__func__,
-						edge_serial->rxPort,
-						edge_serial->rxBytesRemaining);
+				dev_dbg(dev, "%s - Data for Port %u Len %u\n",
+					__func__,
+					edge_serial->rxPort,
+					edge_serial->rxBytesRemaining);
 
 				/* ASSERT(DevExt->RxPort < DevExt->NumPorts);
 				 * ASSERT(DevExt->RxBytesRemaining <
@@ -1896,7 +1865,7 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
 					tty = tty_port_tty_get(
 						&edge_port->port->port);
 					if (tty) {
-						dbg("%s - Sending %d bytes to TTY for port %d",
+						dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
 							__func__, rxLen, edge_serial->rxPort);
 						edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
 						tty_kref_put(tty);
@@ -1935,6 +1904,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 	struct usb_serial_port *port;
 	struct edgeport_port *edge_port;
 	struct tty_struct *tty;
+	struct device *dev;
 	__u8 code = edge_serial->rxStatusCode;
 
 	/* switch the port pointer to the one being currently talked about */
@@ -1946,16 +1916,15 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 					__func__, edge_serial->rxPort);
 		return;
 	}
-
-	dbg("%s - port %d", __func__, edge_serial->rxPort);
+	dev = &port->dev;
 
 	if (code == IOSP_EXT_STATUS) {
 		switch (byte2) {
 		case IOSP_EXT_STATUS_CHASE_RSP:
 			/* we want to do EXT status regardless of port
 			 * open/closed */
-			dbg("%s - Port %u EXT CHASE_RSP Data = %02x",
-					__func__, edge_serial->rxPort, byte3);
+			dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n",
+				__func__, edge_serial->rxPort, byte3);
 			/* Currently, the only EXT_STATUS is Chase, so process
 			 * here instead of one more call to one more subroutine
 			 * If/when more EXT_STATUS, there'll be more work to do
@@ -1970,7 +1939,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 			return;
 
 		case IOSP_EXT_STATUS_RX_CHECK_RSP:
-			dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3);
+			dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n",
+				__func__, edge_serial->rxPort, byte3);
 			/* Port->RxCheckRsp = true; */
 			return;
 		}
@@ -1979,7 +1949,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 	if (code == IOSP_STATUS_OPEN_RSP) {
 		edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
 		edge_port->maxTxCredits = edge_port->txCredits;
-		dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+		dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n",
+			__func__, edge_serial->rxPort, byte2, edge_port->txCredits);
 		handle_new_msr(edge_port, byte2);
 
 		/* send the current line settings to the port so we are
@@ -2008,27 +1979,27 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 	switch (code) {
 	/* Not currently sent by Edgeport */
 	case IOSP_STATUS_LSR:
-		dbg("%s - Port %u LSR Status = %02x",
-					__func__, edge_serial->rxPort, byte2);
+		dev_dbg(dev, "%s - Port %u LSR Status = %02x\n",
+			__func__, edge_serial->rxPort, byte2);
 		handle_new_lsr(edge_port, false, byte2, 0);
 		break;
 
 	case IOSP_STATUS_LSR_DATA:
-		dbg("%s - Port %u LSR Status = %02x, Data = %02x",
-				__func__, edge_serial->rxPort, byte2, byte3);
+		dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n",
+			__func__, edge_serial->rxPort, byte2, byte3);
 		/* byte2 is LSR Register */
 		/* byte3 is broken data byte */
 		handle_new_lsr(edge_port, true, byte2, byte3);
 		break;
 	/*
 	 *	case IOSP_EXT_4_STATUS:
-	 *		dbg("%s - Port %u LSR Status = %02x Data = %02x",
+	 *		dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n",
 	 *			__func__, edge_serial->rxPort, byte2, byte3);
 	 *		break;
 	 */
 	case IOSP_STATUS_MSR:
-		dbg("%s - Port %u MSR Status = %02x",
-					__func__, edge_serial->rxPort, byte2);
+		dev_dbg(dev, "%s - Port %u MSR Status = %02x\n",
+			__func__, edge_serial->rxPort, byte2);
 		/*
 		 * Process this new modem status and generate appropriate
 		 * events, etc, based on the new status. This routine
@@ -2038,7 +2009,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 		break;
 
 	default:
-		dbg("%s - Unrecognized IOSP status code %u", __func__, code);
+		dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code);
 		break;
 	}
 }
@@ -2073,8 +2044,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
 {
 	struct  async_icount *icount;
 
-	dbg("%s %02x", __func__, newMsr);
-
 	if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR |
 			EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
 		icount = &edge_port->icount;
@@ -2107,8 +2076,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 		(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
 	struct async_icount *icount;
 
-	dbg("%s - %02x", __func__, newLsr);
-
 	edge_port->shadowLSR = lsr;
 
 	if (newLsr & LSR_BREAK) {
@@ -2156,7 +2123,7 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 	__u16 current_length;
 	unsigned char *transfer_buffer;
 
-	dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
+	dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length);
 
 	transfer_buffer =  kmalloc(64, GFP_KERNEL);
 	if (!transfer_buffer) {
@@ -2173,8 +2140,7 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 		else
 			current_length = length;
 
-/*		dbg("%s - writing %x, %x, %d", __func__,
-					extAddr, addr, current_length); */
+/*		dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */
 		memcpy(transfer_buffer, data, current_length);
 		result = usb_control_msg(serial->dev,
 					usb_sndctrlpipe(serial->dev, 0),
@@ -2207,8 +2173,6 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 	__u16 current_length;
 	unsigned char *transfer_buffer;
 
-/*	dbg("%s - %x, %x, %d", __func__, extAddr, addr, length); */
-
 	transfer_buffer =  kmalloc(64, GFP_KERNEL);
 	if (!transfer_buffer) {
 		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
@@ -2223,8 +2187,6 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 			current_length = 64;
 		else
 			current_length = length;
-/*		dbg("%s - writing %x, %x, %d", __func__,
-					extAddr, addr, current_length); */
 		memcpy(transfer_buffer, data, current_length);
 		result = usb_control_msg(serial->dev,
 					usb_sndctrlpipe(serial->dev, 0),
@@ -2257,8 +2219,6 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr,
 	__u16 current_length;
 	unsigned char *transfer_buffer;
 
-	dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
-
 	transfer_buffer =  kmalloc(64, GFP_KERNEL);
 	if (!transfer_buffer) {
 		dev_err(&serial->dev->dev,
@@ -2273,8 +2233,6 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr,
 			current_length = 64;
 		else
 			current_length = length;
-/*		dbg("%s - %x, %x, %d", __func__,
-				extAddr, addr, current_length); */
 		result = usb_control_msg(serial->dev,
 					usb_rcvctrlpipe(serial->dev, 0),
 					USB_REQUEST_ION_READ_ROM,
@@ -2305,8 +2263,6 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
 	int             length = 0;
 	int             status = 0;
 
-	dbg("%s - %d, %d", __func__, command, param);
-
 	buffer = kmalloc(10, GFP_ATOMIC);
 	if (!buffer) {
 		dev_err(&edge_port->port->dev,
@@ -2339,11 +2295,11 @@ static int write_cmd_usb(struct edgeport_port *edge_port,
 {
 	struct edgeport_serial *edge_serial =
 				usb_get_serial_data(edge_port->port->serial);
+	struct device *dev = &edge_port->port->dev;
 	int status = 0;
 	struct urb *urb;
 
-	usb_serial_debug_data(debug, &edge_port->port->dev,
-						__func__, length, buffer);
+	usb_serial_debug_data(dev, __func__, length, buffer);
 
 	/* Allocate our next urb */
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
@@ -2351,8 +2307,8 @@ static int write_cmd_usb(struct edgeport_port *edge_port,
 		return -ENOMEM;
 
 	atomic_inc(&CmdUrbs);
-	dbg("%s - ALLOCATE URB %p (outstanding %d)",
-				__func__, urb, atomic_read(&CmdUrbs));
+	dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n",
+		__func__, urb, atomic_read(&CmdUrbs));
 
 	usb_fill_bulk_urb(urb, edge_serial->serial->dev,
 			usb_sndbulkpipe(edge_serial->serial->dev,
@@ -2364,9 +2320,8 @@ static int write_cmd_usb(struct edgeport_port *edge_port,
 
 	if (status) {
 		/* something went wrong */
-		dev_err(&edge_port->port->dev,
-		    "%s - usb_submit_urb(write command) failed, status = %d\n",
-							__func__, status);
+		dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n",
+			__func__, status);
 		usb_kill_urb(urb);
 		usb_free_urb(urb);
 		atomic_dec(&CmdUrbs);
@@ -2378,7 +2333,7 @@ static int write_cmd_usb(struct edgeport_port *edge_port,
 
 	if (edge_port->commandPending) {
 		/* command timed out */
-		dbg("%s - command timed out", __func__);
+		dev_dbg(dev, "%s - command timed out\n", __func__);
 		status = -EINVAL;
 	}
 #endif
@@ -2396,6 +2351,7 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
 {
 	struct edgeport_serial *edge_serial =
 				usb_get_serial_data(edge_port->port->serial);
+	struct device *dev = &edge_port->port->dev;
 	unsigned char *cmdBuffer;
 	unsigned char *currCmd;
 	int cmdLen = 0;
@@ -2406,26 +2362,24 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
 
 	if (edge_serial->is_epic &&
 	    !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
-		dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
-		    edge_port->port->number, baudRate);
+		dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d\n",
+			edge_port->port->number, baudRate);
 		return 0;
 	}
 
-	dbg("%s - port = %d, baud = %d", __func__,
-					edge_port->port->number, baudRate);
+	dev_dbg(dev, "%s - port = %d, baud = %d\n", __func__,
+		edge_port->port->number, baudRate);
 
-	status = calc_baud_rate_divisor(baudRate, &divisor);
+	status = calc_baud_rate_divisor(dev, baudRate, &divisor);
 	if (status) {
-		dev_err(&edge_port->port->dev, "%s - bad baud rate\n",
-								__func__);
+		dev_err(dev, "%s - bad baud rate\n", __func__);
 		return status;
 	}
 
 	/* Alloc memory for the string of commands. */
 	cmdBuffer =  kmalloc(0x100, GFP_ATOMIC);
 	if (!cmdBuffer) {
-		dev_err(&edge_port->port->dev,
-			"%s - kmalloc(%d) failed.\n", __func__, 0x100);
+		dev_err(dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100);
 		return -ENOMEM;
 	}
 	currCmd = cmdBuffer;
@@ -2456,14 +2410,11 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
  *	this function calculates the proper baud rate divisor for the specified
  *	baud rate.
  *****************************************************************************/
-static int calc_baud_rate_divisor(int baudrate, int *divisor)
+static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor)
 {
 	int i;
 	__u16 custom;
 
-
-	dbg("%s - %d", __func__, baudrate);
-
 	for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
 		if (divisor_table[i].BaudRate == baudrate) {
 			*divisor = divisor_table[i].Divisor;
@@ -2480,7 +2431,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
 
 		*divisor = custom;
 
-		dbg("%s - Baud %d = %d", __func__, baudrate, custom);
+		dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom);
 		return 0;
 	}
 
@@ -2497,25 +2448,26 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
 {
 	struct edgeport_serial *edge_serial =
 				usb_get_serial_data(edge_port->port->serial);
+	struct device *dev = &edge_port->port->dev;
 	unsigned char *cmdBuffer;
 	unsigned char *currCmd;
 	unsigned long cmdLen = 0;
 	int status;
 
-	dbg("%s - write to %s register 0x%02x",
-			(regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
+	dev_dbg(dev, "%s - write to %s register 0x%02x\n",
+		(regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
 
 	if (edge_serial->is_epic &&
 	    !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
 	    regNum == MCR) {
-		dbg("SendCmdWriteUartReg - Not writing to MCR Register");
+		dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n");
 		return 0;
 	}
 
 	if (edge_serial->is_epic &&
 	    !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
 	    regNum == LCR) {
-		dbg("SendCmdWriteUartReg - Not writing to LCR Register");
+		dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n");
 		return 0;
 	}
 
@@ -2550,6 +2502,7 @@ static int send_cmd_write_uart_register(struct edgeport_port *edge_port,
 static void change_port_settings(struct tty_struct *tty,
 	struct edgeport_port *edge_port, struct ktermios *old_termios)
 {
+	struct device *dev = &edge_port->port->dev;
 	struct edgeport_serial *edge_serial =
 			usb_get_serial_data(edge_port->port->serial);
 	int baud;
@@ -2562,11 +2515,11 @@ static void change_port_settings(struct tty_struct *tty,
 	__u8 txFlow;
 	int status;
 
-	dbg("%s - port %d", __func__, edge_port->port->number);
+	dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number);
 
 	if (!edge_port->open &&
 	    !edge_port->openPending) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(dev, "%s - port not opened\n", __func__);
 		return;
 	}
 
@@ -2575,20 +2528,20 @@ static void change_port_settings(struct tty_struct *tty,
 	switch (cflag & CSIZE) {
 	case CS5:
 		lData = LCR_BITS_5; mask = 0x1f;
-		dbg("%s - data bits = 5", __func__);
+		dev_dbg(dev, "%s - data bits = 5\n", __func__);
 		break;
 	case CS6:
 		lData = LCR_BITS_6; mask = 0x3f;
-		dbg("%s - data bits = 6", __func__);
+		dev_dbg(dev, "%s - data bits = 6\n", __func__);
 		break;
 	case CS7:
 		lData = LCR_BITS_7; mask = 0x7f;
-		dbg("%s - data bits = 7", __func__);
+		dev_dbg(dev, "%s - data bits = 7\n", __func__);
 		break;
 	default:
 	case CS8:
 		lData = LCR_BITS_8;
-		dbg("%s - data bits = 8", __func__);
+		dev_dbg(dev, "%s - data bits = 8\n", __func__);
 		break;
 	}
 
@@ -2597,28 +2550,28 @@ static void change_port_settings(struct tty_struct *tty,
 		if (cflag & CMSPAR) {
 			if (cflag & PARODD) {
 				lParity = LCR_PAR_MARK;
-				dbg("%s - parity = mark", __func__);
+				dev_dbg(dev, "%s - parity = mark\n", __func__);
 			} else {
 				lParity = LCR_PAR_SPACE;
-				dbg("%s - parity = space", __func__);
+				dev_dbg(dev, "%s - parity = space\n", __func__);
 			}
 		} else if (cflag & PARODD) {
 			lParity = LCR_PAR_ODD;
-			dbg("%s - parity = odd", __func__);
+			dev_dbg(dev, "%s - parity = odd\n", __func__);
 		} else {
 			lParity = LCR_PAR_EVEN;
-			dbg("%s - parity = even", __func__);
+			dev_dbg(dev, "%s - parity = even\n", __func__);
 		}
 	} else {
-		dbg("%s - parity = none", __func__);
+		dev_dbg(dev, "%s - parity = none\n", __func__);
 	}
 
 	if (cflag & CSTOPB) {
 		lStop = LCR_STOP_2;
-		dbg("%s - stop bits = 2", __func__);
+		dev_dbg(dev, "%s - stop bits = 2\n", __func__);
 	} else {
 		lStop = LCR_STOP_1;
-		dbg("%s - stop bits = 1", __func__);
+		dev_dbg(dev, "%s - stop bits = 1\n", __func__);
 	}
 
 	/* figure out the flow control settings */
@@ -2626,9 +2579,9 @@ static void change_port_settings(struct tty_struct *tty,
 	if (cflag & CRTSCTS) {
 		rxFlow |= IOSP_RX_FLOW_RTS;
 		txFlow |= IOSP_TX_FLOW_CTS;
-		dbg("%s - RTS/CTS is enabled", __func__);
+		dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
 	} else {
-		dbg("%s - RTS/CTS is disabled", __func__);
+		dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
 	}
 
 	/* if we are implementing XON/XOFF, set the start and stop character
@@ -2649,19 +2602,19 @@ static void change_port_settings(struct tty_struct *tty,
 		/* if we are implementing INBOUND XON/XOFF */
 		if (I_IXOFF(tty)) {
 			rxFlow |= IOSP_RX_FLOW_XON_XOFF;
-			dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
-					__func__, start_char, stop_char);
+			dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+				__func__, start_char, stop_char);
 		} else {
-			dbg("%s - INBOUND XON/XOFF is disabled", __func__);
+			dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__);
 		}
 
 		/* if we are implementing OUTBOUND XON/XOFF */
 		if (I_IXON(tty)) {
 			txFlow |= IOSP_TX_FLOW_XON_XOFF;
-			dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
-					__func__, start_char, stop_char);
+			dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n",
+				__func__, start_char, stop_char);
 		} else {
-			dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
+			dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__);
 		}
 	}
 
@@ -2704,7 +2657,7 @@ static void change_port_settings(struct tty_struct *tty,
 		baud = 9600;
 	}
 
-	dbg("%s - baud rate = %d", __func__, baud);
+	dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
 	status = send_cmd_write_baud_rate(edge_port, baud);
 	if (status == -1) {
 		/* Speed change was not possible - put back the old speed */
@@ -2746,9 +2699,10 @@ static void unicode_to_ascii(char *string, int buflen,
  ****************************************************************************/
 static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
 {
+	struct device *dev = &edge_serial->serial->dev->dev;
 	int response;
 
-	dbg("getting manufacturer descriptor");
+	dev_dbg(dev, "getting manufacturer descriptor\n");
 
 	response = rom_read(edge_serial->serial,
 				(EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16,
@@ -2757,42 +2711,41 @@ static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
 				(__u8 *)(&edge_serial->manuf_descriptor));
 
 	if (response < 1)
-		dev_err(&edge_serial->serial->dev->dev,
-			"error in getting manufacturer descriptor\n");
+		dev_err(dev, "error in getting manufacturer descriptor\n");
 	else {
 		char string[30];
-		dbg("**Manufacturer Descriptor");
-		dbg("  RomSize:        %dK",
+		dev_dbg(dev, "**Manufacturer Descriptor\n");
+		dev_dbg(dev, "  RomSize:        %dK\n",
 			edge_serial->manuf_descriptor.RomSize);
-		dbg("  RamSize:        %dK",
+		dev_dbg(dev, "  RamSize:        %dK\n",
 			edge_serial->manuf_descriptor.RamSize);
-		dbg("  CpuRev:         %d",
+		dev_dbg(dev, "  CpuRev:         %d\n",
 			edge_serial->manuf_descriptor.CpuRev);
-		dbg("  BoardRev:       %d",
+		dev_dbg(dev, "  BoardRev:       %d\n",
 			edge_serial->manuf_descriptor.BoardRev);
-		dbg("  NumPorts:       %d",
+		dev_dbg(dev, "  NumPorts:       %d\n",
 			edge_serial->manuf_descriptor.NumPorts);
-		dbg("  DescDate:       %d/%d/%d",
+		dev_dbg(dev, "  DescDate:       %d/%d/%d\n",
 			edge_serial->manuf_descriptor.DescDate[0],
 			edge_serial->manuf_descriptor.DescDate[1],
 			edge_serial->manuf_descriptor.DescDate[2]+1900);
 		unicode_to_ascii(string, sizeof(string),
 			edge_serial->manuf_descriptor.SerialNumber,
 			edge_serial->manuf_descriptor.SerNumLength/2);
-		dbg("  SerialNumber: %s", string);
+		dev_dbg(dev, "  SerialNumber: %s\n", string);
 		unicode_to_ascii(string, sizeof(string),
 			edge_serial->manuf_descriptor.AssemblyNumber,
 			edge_serial->manuf_descriptor.AssemblyNumLength/2);
-		dbg("  AssemblyNumber: %s", string);
+		dev_dbg(dev, "  AssemblyNumber: %s\n", string);
 		unicode_to_ascii(string, sizeof(string),
 		    edge_serial->manuf_descriptor.OemAssyNumber,
 		    edge_serial->manuf_descriptor.OemAssyNumLength/2);
-		dbg("  OemAssyNumber:  %s", string);
-		dbg("  UartType:       %d",
+		dev_dbg(dev, "  OemAssyNumber:  %s\n", string);
+		dev_dbg(dev, "  UartType:       %d\n",
 			edge_serial->manuf_descriptor.UartType);
-		dbg("  IonPid:         %d",
+		dev_dbg(dev, "  IonPid:         %d\n",
 			edge_serial->manuf_descriptor.IonPid);
-		dbg("  IonConfig:      %d",
+		dev_dbg(dev, "  IonConfig:      %d\n",
 			edge_serial->manuf_descriptor.IonConfig);
 	}
 }
@@ -2805,9 +2758,10 @@ static void get_manufacturing_desc(struct edgeport_serial *edge_serial)
  ****************************************************************************/
 static void get_boot_desc(struct edgeport_serial *edge_serial)
 {
+	struct device *dev = &edge_serial->serial->dev->dev;
 	int response;
 
-	dbg("getting boot descriptor");
+	dev_dbg(dev, "getting boot descriptor\n");
 
 	response = rom_read(edge_serial->serial,
 				(EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16,
@@ -2816,23 +2770,22 @@ static void get_boot_desc(struct edgeport_serial *edge_serial)
 				(__u8 *)(&edge_serial->boot_descriptor));
 
 	if (response < 1)
-		dev_err(&edge_serial->serial->dev->dev,
-				"error in getting boot descriptor\n");
+		dev_err(dev, "error in getting boot descriptor\n");
 	else {
-		dbg("**Boot Descriptor:");
-		dbg("  BootCodeLength: %d",
-		    le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
-		dbg("  MajorVersion:   %d",
+		dev_dbg(dev, "**Boot Descriptor:\n");
+		dev_dbg(dev, "  BootCodeLength: %d\n",
+			le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength));
+		dev_dbg(dev, "  MajorVersion:   %d\n",
 			edge_serial->boot_descriptor.MajorVersion);
-		dbg("  MinorVersion:   %d",
+		dev_dbg(dev, "  MinorVersion:   %d\n",
 			edge_serial->boot_descriptor.MinorVersion);
-		dbg("  BuildNumber:    %d",
+		dev_dbg(dev, "  BuildNumber:    %d\n",
 			le16_to_cpu(edge_serial->boot_descriptor.BuildNumber));
-		dbg("  Capabilities:   0x%x",
+		dev_dbg(dev, "  Capabilities:   0x%x\n",
 		      le16_to_cpu(edge_serial->boot_descriptor.Capabilities));
-		dbg("  UConfig0:       %d",
+		dev_dbg(dev, "  UConfig0:       %d\n",
 			edge_serial->boot_descriptor.UConfig0);
-		dbg("  UConfig1:       %d",
+		dev_dbg(dev, "  UConfig1:       %d\n",
 			edge_serial->boot_descriptor.UConfig1);
 	}
 }
@@ -2844,6 +2797,7 @@ static void get_boot_desc(struct edgeport_serial *edge_serial)
  ****************************************************************************/
 static void load_application_firmware(struct edgeport_serial *edge_serial)
 {
+	struct device *dev = &edge_serial->serial->dev->dev;
 	const struct ihex_binrec *rec;
 	const struct firmware *fw;
 	const char *fw_name;
@@ -2864,7 +2818,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 			break;
 
 		case EDGE_DOWNLOAD_FILE_NONE:
-			dbg("No download file specified, skipping download");
+			dev_dbg(dev, "No download file specified, skipping download\n");
 			return;
 
 		default:
@@ -2874,7 +2828,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 	response = request_ihex_firmware(&fw, fw_name,
 				    &edge_serial->serial->dev->dev);
 	if (response) {
-		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+		dev_err(dev, "Failed to load image \"%s\" err %d\n",
 		       fw_name, response);
 		return;
 	}
@@ -2882,7 +2836,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 	rec = (const struct ihex_binrec *)fw->data;
 	build = (rec->data[2] << 8) | rec->data[3];
 
-	dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
+	dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build);
 
 	edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
 	edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
@@ -2905,10 +2859,10 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 		}
 	}
 
-	dbg("sending exec_dl_code");
-	response = usb_control_msg (edge_serial->serial->dev, 
-				    usb_sndctrlpipe(edge_serial->serial->dev, 0), 
-				    USB_REQUEST_ION_EXEC_DL_CODE, 
+	dev_dbg(dev, "sending exec_dl_code\n");
+	response = usb_control_msg (edge_serial->serial->dev,
+				    usb_sndctrlpipe(edge_serial->serial->dev, 0),
+				    USB_REQUEST_ION_EXEC_DL_CODE,
 				    0x40, 0x4000, 0x0001, NULL, 0, 3000);
 
 	release_firmware(fw);
@@ -2923,6 +2877,7 @@ static int edge_startup(struct usb_serial *serial)
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
 	struct usb_device *dev;
+	struct device *ddev = &serial->dev->dev;
 	int i, j;
 	int response;
 	bool interrupt_in_found;
@@ -2974,32 +2929,31 @@ static int edge_startup(struct usb_serial *serial)
 	/* serial->num_ports = serial->product_info.NumPorts; */
 	if ((!edge_serial->is_epic) &&
 	    (edge_serial->product_info.NumPorts != serial->num_ports)) {
-		dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
-			 "vs. core thinking we have %d ports, email "
-			 "greg@kroah.com this information.\n",
+		dev_warn(ddev,
+			"Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n",
 			 edge_serial->product_info.NumPorts,
 			 serial->num_ports);
 	}
 
-	dbg("%s - time 1 %ld", __func__, jiffies);
+	dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies);
 
 	/* If not an EPiC device */
 	if (!edge_serial->is_epic) {
 		/* now load the application firmware into this device */
 		load_application_firmware(edge_serial);
 
-		dbg("%s - time 2 %ld", __func__, jiffies);
+		dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies);
 
 		/* Check current Edgeport EEPROM and update if necessary */
 		update_edgeport_E2PROM(edge_serial);
 
-		dbg("%s - time 3 %ld", __func__, jiffies);
+		dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies);
 
 		/* set the configuration to use #1 */
-/*		dbg("set_configuration 1"); */
+/*		dev_dbg(ddev, "set_configuration 1\n"); */
 /*		usb_set_configuration (dev, 1); */
 	}
-	dbg("  FirmwareMajorVersion  %d.%d.%d",
+	dev_dbg(ddev, "  FirmwareMajorVersion  %d.%d.%d\n",
 	    edge_serial->product_info.FirmwareMajorVersion,
 	    edge_serial->product_info.FirmwareMinorVersion,
 	    le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber));
@@ -3011,8 +2965,7 @@ static int edge_startup(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
 		if (edge_port == NULL) {
-			dev_err(&serial->dev->dev, "%s - Out of memory\n",
-								   __func__);
+			dev_err(ddev, "%s - Out of memory\n", __func__);
 			for (j = 0; j < i; ++j) {
 				kfree(usb_get_serial_port_data(serial->port[j]));
 				usb_set_serial_port_data(serial->port[j],
@@ -3044,19 +2997,19 @@ static int edge_startup(struct usb_serial *serial)
 			if (!interrupt_in_found &&
 			    (usb_endpoint_is_int_in(endpoint))) {
 				/* we found a interrupt in endpoint */
-				dbg("found interrupt in");
+				dev_dbg(ddev, "found interrupt in\n");
 
 				/* not set up yet, so do it now */
 				edge_serial->interrupt_read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
 				if (!edge_serial->interrupt_read_urb) {
-					dev_err(&dev->dev, "out of memory\n");
+					dev_err(ddev, "out of memory\n");
 					return -ENOMEM;
 				}
 				edge_serial->interrupt_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->interrupt_in_buffer) {
-					dev_err(&dev->dev, "out of memory\n");
+					dev_err(ddev, "out of memory\n");
 					usb_free_urb(edge_serial->interrupt_read_urb);
 					return -ENOMEM;
 				}
@@ -3081,13 +3034,13 @@ static int edge_startup(struct usb_serial *serial)
 			if (!bulk_in_found &&
 				(usb_endpoint_is_bulk_in(endpoint))) {
 				/* we found a bulk in endpoint */
-				dbg("found bulk in");
+				dev_dbg(ddev, "found bulk in\n");
 
 				/* not set up yet, so do it now */
 				edge_serial->read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
 				if (!edge_serial->read_urb) {
-					dev_err(&dev->dev, "out of memory\n");
+					dev_err(ddev, "out of memory\n");
 					return -ENOMEM;
 				}
 				edge_serial->bulk_in_buffer =
@@ -3114,7 +3067,7 @@ static int edge_startup(struct usb_serial *serial)
 			if (!bulk_out_found &&
 			    (usb_endpoint_is_bulk_out(endpoint))) {
 				/* we found a bulk out endpoint */
-				dbg("found bulk out");
+				dev_dbg(ddev, "found bulk out\n");
 				edge_serial->bulk_out_endpoint =
 						endpoint->bEndpointAddress;
 				bulk_out_found = true;
@@ -3122,8 +3075,7 @@ static int edge_startup(struct usb_serial *serial)
 		}
 
 		if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
-			dev_err(&dev->dev, "Error - the proper endpoints "
-				"were not found!\n");
+			dev_err(ddev, "Error - the proper endpoints were not found!\n");
 			return -ENODEV;
 		}
 
@@ -3132,8 +3084,7 @@ static int edge_startup(struct usb_serial *serial)
 		response = usb_submit_urb(edge_serial->interrupt_read_urb,
 								GFP_KERNEL);
 		if (response)
-			dev_err(&dev->dev,
-				"%s - Error %d submitting control urb\n",
+			dev_err(ddev, "%s - Error %d submitting control urb\n",
 				__func__, response);
 	}
 	return response;
@@ -3148,8 +3099,6 @@ static void edge_disconnect(struct usb_serial *serial)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 
-	dbg("%s", __func__);
-
 	/* stop reads and writes on all ports */
 	/* free up our endpoint stuff */
 	if (edge_serial->is_epic) {
@@ -3173,8 +3122,6 @@ static void edge_release(struct usb_serial *serial)
 	struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
 	int i;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 
@@ -3190,6 +3137,3 @@ MODULE_FIRMWARE("edgeport/boot.fw");
 MODULE_FIRMWARE("edgeport/boot2.fw");
 MODULE_FIRMWARE("edgeport/down.fw");
 MODULE_FIRMWARE("edgeport/down2.fw");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");