diff options
author | Lucas De Marchi <lucas.demarchi@profusion.mobi> | 2011-03-30 22:57:33 -0300 |
---|---|---|
committer | Lucas De Marchi <lucas.demarchi@profusion.mobi> | 2011-03-31 11:26:23 -0300 |
commit | 25985edcedea6396277003854657b5f3cb31a628 (patch) | |
tree | f026e810210a2ee7290caeb737c23cb6472b7c38 /drivers/usb | |
parent | 6aba74f2791287ec407e0f92487a725a25908067 (diff) | |
download | linux-25985edcedea6396277003854657b5f3cb31a628.tar.gz linux-25985edcedea6396277003854657b5f3cb31a628.tar.xz |
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Diffstat (limited to 'drivers/usb')
61 files changed, 108 insertions, 108 deletions
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index b268e9fccb47..e71521ce3010 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1283,7 +1283,7 @@ static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate) /* in bulk mode the modem have problem with high rate * changing internal timing could improve things, but the - * value is misterious. + * value is mysterious. * ADI930 don't support it (-EPIPE error). */ @@ -1743,7 +1743,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc) goto out; } } else { - /* This realy should not happen */ + /* This really should not happen */ uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver); goto out; } @@ -1798,7 +1798,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc) goto out; } } else { - /* This realy should not happen */ + /* This really should not happen */ uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver); goto out; } @@ -1829,7 +1829,7 @@ static int uea_start_reset(struct uea_softc *sc) /* mask interrupt */ sc->booting = 1; - /* We need to set this here because, a ack timeout could have occured, + /* We need to set this here because, a ack timeout could have occurred, * but before we start the reboot, the ack occurs and set this to 1. * So we will failed to wait Ready CMV. */ diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c index b6d49234e521..62050f7a4f97 100644 --- a/drivers/usb/c67x00/c67x00-drv.c +++ b/drivers/usb/c67x00/c67x00-drv.c @@ -27,7 +27,7 @@ * the link between the common hardware parts and the subdrivers (e.g. * interrupt handling). * - * The c67x00 has 2 SIE's (serial interface engine) wich can be configured + * The c67x00 has 2 SIE's (serial interface engine) which can be configured * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG). * * Depending on the platform configuration, the SIE's are created and diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h index 74e44621e313..e3d493d4d61a 100644 --- a/drivers/usb/c67x00/c67x00-hcd.h +++ b/drivers/usb/c67x00/c67x00-hcd.h @@ -34,7 +34,7 @@ /* * The following parameters depend on the CPU speed, bus speed, ... * These can be tuned for specific use cases, e.g. if isochronous transfers - * are very important, bandwith can be sacrificed to guarantee that the + * are very important, bandwidth can be sacrificed to guarantee that the * 1ms deadline will be met. * If bulk transfers are important, the MAX_FRAME_BW can be increased, * but some (or many) isochronous deadlines might not be met. diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c index f6b3c253f3fa..a03fbc15fa9c 100644 --- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -907,7 +907,7 @@ static inline int c67x00_end_of_data(struct c67x00_td *td) /* Remove all td's from the list which come * after last_td and are meant for the same pipe. - * This is used when a short packet has occured */ + * This is used when a short packet has occurred */ static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00, struct c67x00_td *last_td) { diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 5eeb570b9a61..b4ea54dbf323 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -52,7 +52,7 @@ */ /* - * The only reason to have several buffers is to accomodate assumptions + * The only reason to have several buffers is to accommodate assumptions * in line disciplines. They ask for empty space amount, receive our URB size, * and proceed to issue several 1-character writes, assuming they will fit. * The very first write takes a complete URB. Fortunately, this only happens diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 6a54634ab823..385acb895ab3 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -483,7 +483,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf, } done += n_characters; - /* Terminate if end-of-message bit recieved from device */ + /* Terminate if end-of-message bit received from device */ if ((buffer[8] & 0x01) && (actual >= n_characters + 12)) remaining = 0; else diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 02b4dbfa488a..8eed05d23838 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -700,7 +700,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) /* The USB 2.0 spec says 256 ms. This is close enough and won't * exceed that limit if HZ is 100. The math is more clunky than * maybe expected, this is to make sure that all timers for USB devices - * fire at the same time to give the CPU a break inbetween */ + * fire at the same time to give the CPU a break in between */ if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) : (length == 0 && hcd->status_urb != NULL)) mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 564eaa5525d7..8fb754916c67 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1649,7 +1649,7 @@ void usb_disconnect(struct usb_device **pdev) /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. - * this quiesces everyting except pending urbs. + * this quiesces everything except pending urbs. */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); dev_info(&udev->dev, "USB disconnect, device number %d\n", diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 0bc06e2bcfcb..a6a350f5827b 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -648,7 +648,7 @@ static int ehci_reset_port(int port) if (!(portsc & PORT_CONNECT)) return -ENOTCONN; - /* bomb out completely if something weird happend */ + /* bomb out completely if something weird happened */ if ((portsc & PORT_CSC)) return -EINVAL; diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index f8dd7269d79c..6e42aab75806 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev) return 0; } -/* Calculates fifo start of endpoint based on preceeding endpoints */ +/* Calculates fifo start of endpoint based on preceding endpoints */ static int udc_set_txfifo_addr(struct udc_ep *ep) { struct udc *dev; @@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix) if (use_dma) { /* BNA event ? */ if (tmp & AMD_BIT(UDC_EPSTS_BNA)) { - DBG(dev, "BNA ep%dout occured - DESPTR = %x \n", + DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n", ep->num, readl(&ep->regs->desptr)); /* clear BNA */ writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts); @@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix) } /* HE event ? */ if (tmp & AMD_BIT(UDC_EPSTS_HE)) { - dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num); + dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num); /* clear HE */ writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts); @@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) /* BNA ? */ if (epsts & AMD_BIT(UDC_EPSTS_BNA)) { dev_err(&dev->pdev->dev, - "BNA ep%din occured - DESPTR = %08lx \n", + "BNA ep%din occurred - DESPTR = %08lx \n", ep->num, (unsigned long) readl(&ep->regs->desptr)); @@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) /* HE event ? */ if (epsts & AMD_BIT(UDC_EPSTS_HE)) { dev_err(&dev->pdev->dev, - "HE ep%dn occured - DESPTR = %08lx \n", + "HE ep%dn occurred - DESPTR = %08lx \n", ep->num, (unsigned long) readl(&ep->regs->desptr)); /* clear HE */ @@ -2384,7 +2384,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) req = list_entry(ep->queue.next, struct udc_request, queue); /* - * length bytes transfered + * length bytes transferred * check dma done of last desc. in PPBDU mode */ if (use_dma_ppb_du) { @@ -2784,7 +2784,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev) /* write fifo */ udc_txfifo_write(ep, &req->req); - /* lengh bytes transfered */ + /* lengh bytes transferred */ len = req->req.length - req->req.actual; if (len > ep->ep.maxpacket) len = ep->ep.maxpacket; diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h index 4bbabbbfc93f..1d1c7543468e 100644 --- a/drivers/usb/gadget/amd5536udc.h +++ b/drivers/usb/gadget/amd5536udc.h @@ -584,7 +584,7 @@ union udc_setup_data { * SET and GET bitfields in u32 values * via constants for mask/offset: * <bit_field_stub_name> is the text between - * UDC_ and _MASK|_OFS of appropiate + * UDC_ and _MASK|_OFS of appropriate * constant * * set bitfield value in u32 u32Val diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index bb8ddf0469f9..9b7cdb16f26b 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -826,7 +826,7 @@ done: return status; } -/* reinit == restore inital software state */ +/* reinit == restore initial software state */ static void udc_reinit(struct at91_udc *udc) { u32 i; diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index c2251c40a205..82314ed22506 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -42,7 +42,7 @@ static struct usb_composite_driver *composite; static int (*composite_gadget_bind)(struct usb_composite_dev *cdev); -/* Some systems will need runtime overrides for the product identifers +/* Some systems will need runtime overrides for the product identifiers * published in the device descriptor, either numbers or strings or both. * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ @@ -205,14 +205,14 @@ int usb_function_activate(struct usb_function *function) * usb_interface_id() is called from usb_function.bind() callbacks to * allocate new interface IDs. The function driver will then store that * ID in interface, association, CDC union, and other descriptors. It - * will also handle any control requests targetted at that interface, + * will also handle any control requests targeted at that interface, * particularly changing its altsetting via set_alt(). There may * also be class-specific or vendor-specific requests to handle. * * All interface identifier should be allocated using this routine, to * ensure that for example different functions don't wrongly assign * different meanings to the same identifier. Note that since interface - * identifers are configuration-specific, functions used in more than + * identifiers are configuration-specific, functions used in more than * one configuration (or more than once in a given configuration) need * multiple versions of the relevant descriptors. * diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 00975ed903d1..9abecfddb27d 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -742,7 +742,7 @@ int __init control_selector_init(struct f_audio *audio) } /** - * audio_bind_config - add USB audio fucntion to a configuration + * audio_bind_config - add USB audio function to a configuration * @c: the configuration to supcard the USB audio function * Context: single threaded during gadget setup * diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index 130eee678c8b..86902a60bcdb 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -111,7 +111,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g) #define NTB_OUT_SIZE 16384 /* - * skbs of size less than that will not be alligned + * skbs of size less than that will not be aligned * to NCM's dwNtbInMaxSize to save bus bandwidth */ diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h index bea5b827bebe..e35e24fd64bb 100644 --- a/drivers/usb/gadget/fsl_qe_udc.h +++ b/drivers/usb/gadget/fsl_qe_udc.h @@ -208,14 +208,14 @@ struct qe_frame{ /* Frame status field */ /* Receive side */ #define FRAME_OK 0x00000000 /* Frame tranmitted or received OK */ -#define FRAME_ERROR 0x80000000 /* Error occured on frame */ +#define FRAME_ERROR 0x80000000 /* Error occurred on frame */ #define START_FRAME_LOST 0x40000000 /* START_FRAME_LOST */ #define END_FRAME_LOST 0x20000000 /* END_FRAME_LOST */ #define RX_ER_NONOCT 0x10000000 /* Rx Non Octet Aligned Packet */ #define RX_ER_BITSTUFF 0x08000000 /* Frame Aborted --Received packet with bit stuff error */ #define RX_ER_CRC 0x04000000 /* Received packet with CRC error */ -#define RX_ER_OVERUN 0x02000000 /* Over-run occured on reception */ +#define RX_ER_OVERUN 0x02000000 /* Over-run occurred on reception */ #define RX_ER_PID 0x01000000 /* Wrong PID received */ /* Tranmit side */ #define TX_ER_NAK 0x00800000 /* Received NAK handshake */ @@ -379,7 +379,7 @@ struct qe_udc { #define T_LSP 0x01000000 /* Low-speed transaction */ #define T_PID 0x00c00000 /* packet id */ #define T_NAK 0x00100000 /* No ack. */ -#define T_STAL 0x00080000 /* Stall recieved */ +#define T_STAL 0x00080000 /* Stall received */ #define T_TO 0x00040000 /* time out */ #define T_UN 0x00020000 /* underrun */ diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 912cb8e63fe3..07499c1cdcc4 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -464,7 +464,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, max = le16_to_cpu(desc->wMaxPacketSize); - /* Disable automatic zlp generation. Driver is reponsible to indicate + /* Disable automatic zlp generation. Driver is responsible to indicate * explicitly through req->req.zero. This is needed to enable multi-td * request. */ zlt = 1; @@ -648,7 +648,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) | EP_QUEUE_HEAD_STATUS_HALT)); dQH->size_ioc_int_sts &= temp; - /* Ensure that updates to the QH will occure before priming. */ + /* Ensure that updates to the QH will occur before priming. */ wmb(); /* Prime endpoint by writing 1 to ENDPTPRIME */ @@ -1459,7 +1459,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe, status = -EILSEQ; break; } else - ERR("Unknown error has occured (0x%x)!\n", + ERR("Unknown error has occurred (0x%x)!\n", errors); } else if (le32_to_cpu(curr_td->size_ioc_sts) diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h index 20aeceed48c7..e88cce5c2c0d 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.h +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -15,7 +15,7 @@ struct usb_dr_device { u8 res1[256]; u16 caplength; /* Capability Register Length */ u16 hciversion; /* Host Controller Interface Version */ - u32 hcsparams; /* Host Controller Structual Parameters */ + u32 hcsparams; /* Host Controller Structural Parameters */ u32 hccparams; /* Host Controller Capability Parameters */ u8 res2[20]; u32 dciversion; /* Device Controller Interface Version */ @@ -52,7 +52,7 @@ struct usb_dr_host { u8 res1[256]; u16 caplength; /* Capability Register Length */ u16 hciversion; /* Host Controller Interface Version */ - u32 hcsparams; /* Host Controller Structual Parameters */ + u32 hcsparams; /* Host Controller Structural Parameters */ u32 hccparams; /* Host Controller Capability Parameters */ u8 res2[20]; u32 dciversion; /* Device Controller Interface Version */ diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 0ab7e141d494..47b86b99d449 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -67,7 +67,7 @@ MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); -/* Some systems will want different product identifers published in the +/* Some systems will want different product identifiers published in the * device descriptor, either numbers or strings or both. These string * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index 1eca8b47ce3c..9cee88a43a73 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -642,7 +642,7 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req) dqh->dtd_status &= dtd_status; dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status); - /* ensure that updates to the dQH will occure before priming */ + /* ensure that updates to the dQH will occur before priming */ wmb(); /* write 1 to endptprime register to PRIME endpoint */ diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index d5468a7f38e0..b62b2640deb0 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -325,7 +325,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req) /* * Ensure that updates to the QH will - * occure before priming. + * occur before priming. */ wmb(); @@ -338,7 +338,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req) & EP_QUEUE_HEAD_NEXT_POINTER_MASK;; dqh->size_ioc_int_sts = 0; - /* Ensure that updates to the QH will occure before priming. */ + /* Ensure that updates to the QH will occur before priming. */ wmb(); /* Prime the Endpoint */ @@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev) return IRQ_NONE; } - /* Clear all the interrupts occured */ + /* Clear all the interrupts occurred */ writel(status, &udc->op_regs->usbsts); if (status & USBSTS_ERR) diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index d09155b25d73..24696f7fa6a9 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -117,7 +117,7 @@ module_param (fifo_mode, ushort, 0644); /* enable_suspend -- When enabled, the driver will respond to * USB suspend requests by powering down the NET2280. Otherwise, - * USB suspend requests will be ignored. This is acceptible for + * USB suspend requests will be ignored. This is acceptable for * self-powered devices */ static int enable_suspend = 0; diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c index b5364f9d7cd2..55ca63ad3506 100644 --- a/drivers/usb/gadget/nokia.c +++ b/drivers/usb/gadget/nokia.c @@ -203,7 +203,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) goto err_usb; } - /* finaly register the configuration */ + /* finally register the configuration */ status = usb_add_config(cdev, &nokia_config_500ma_driver, nokia_bind_config); if (status < 0) diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 12ff6cffedc9..c3f2bd42bd5a 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -126,7 +126,7 @@ static struct printer_dev usb_printer_gadget; #define PRINTER_VENDOR_NUM 0x0525 /* NetChip */ #define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */ -/* Some systems will want different product identifers published in the +/* Some systems will want different product identifiers published in the * device descriptor, either numbers or strings or both. These string * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 2efd6732d130..78a39a41547d 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -602,7 +602,7 @@ static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in) /** * inc_ep_stats_bytes - Update ep stats counts * @ep: physical endpoint - * @count: bytes transfered on endpoint + * @count: bytes transferred on endpoint * @is_in: ep direction (USB_DIR_IN or 0) */ static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in) @@ -877,7 +877,7 @@ static void nuke(struct pxa_ep *ep, int status) * If there is less space in request than bytes received in OUT endpoint, * bytes are left in the OUT endpoint. * - * Returns how many bytes were actually transfered + * Returns how many bytes were actually transferred */ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req) { @@ -914,7 +914,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req) * endpoint. If there are no bytes to transfer, doesn't write anything * to physical endpoint. * - * Returns how many bytes were actually transfered. + * Returns how many bytes were actually transferred. */ static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req, unsigned int max) @@ -991,7 +991,7 @@ static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req) * caller guarantees at least one packet buffer is ready (or a zlp). * Doesn't complete the request, that's the caller's job * - * Returns 1 if request fully transfered, 0 if partial transfer + * Returns 1 if request fully transferred, 0 if partial transfer */ static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req) { @@ -1094,7 +1094,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req) * Sends a request (or a part of the request) to the control endpoint (ep0 in). * If the request doesn't fit, the remaining part will be sent from irq. * The request is considered fully written only if either : - * - last write transfered all remaining bytes, but fifo was not fully filled + * - last write transferred all remaining bytes, but fifo was not fully filled * - last write was a 0 length write * * Returns 1 if request fully written, 0 if request only partially sent @@ -1548,7 +1548,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget) * pxa_udc_wakeup - Force udc device out of suspend * @_gadget: usb gadget * - * Returns 0 if successfull, error code otherwise + * Returns 0 if successful, error code otherwise */ static int pxa_udc_wakeup(struct usb_gadget *_gadget) { diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index ef825c3baed9..0912679de99a 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -41,8 +41,8 @@ /* EP0_MPS_LIMIT * * Unfortunately there seems to be a limit of the amount of data that can - * be transfered by IN transactions on EP0. This is either 127 bytes or 3 - * packets (which practially means 1 packet and 63 bytes of data) when the + * be transferred by IN transactions on EP0. This is either 127 bytes or 3 + * packets (which practically means 1 packet and 63 bytes of data) when the * MPS is set to 64. * * This means if we are wanting to move >127 bytes of data, we need to @@ -783,7 +783,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, hsotg->regs + S3C_DIEPINT(index)); /* Note, trying to clear the NAK here causes problems with transmit - * on the S3C6400 ending up with the TXFIFO becomming full. */ + * on the S3C6400 ending up with the TXFIFO becoming full. */ /* check ep is enabled */ if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna)) @@ -1176,10 +1176,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, writel(ctrl, hsotg->regs + reg); dev_dbg(hsotg->dev, - "writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", + "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", ctrl, reg, readl(hsotg->regs + reg)); - /* don't belive we need to anything more to get the EP + /* don't believe we need to anything more to get the EP * to reply with a STALL packet */ } } @@ -1416,7 +1416,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) * transaction. * * Note, since we don't write any data to the TxFIFO, then it is - * currently belived that we do not need to wait for any space in + * currently believed that we do not need to wait for any space in * the TxFIFO. */ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, @@ -1540,7 +1540,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg) * that requires processing, so find out what is in there and do the * appropriate read. * - * The RXFIFO is a true FIFO, the packets comming out are still in packet + * The RXFIFO is a true FIFO, the packets coming out are still in packet * chunks, so if you have x packets received on an endpoint you'll get x * FIFO events delivered, each with a packet's worth of data in it. * @@ -2188,7 +2188,7 @@ irq_retry: /* these next two seem to crop-up occasionally causing the core * to shutdown the USB transfer, so try clearing them and logging - * the occurence. */ + * the occurrence. */ if (gintsts & S3C_GINTSTS_GOUTNakEff) { dev_info(hsotg->dev, "GOUTNakEff triggered\n"); @@ -2469,7 +2469,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = { .queue = s3c_hsotg_ep_queue, .dequeue = s3c_hsotg_ep_dequeue, .set_halt = s3c_hsotg_ep_sethalt, - /* note, don't belive we have any call for the fifo routines */ + /* note, don't believe we have any call for the fifo routines */ }; /** diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 9483acdf2e9e..e0e0787b724b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -402,7 +402,7 @@ config FHCI_DEBUG depends on USB_FHCI_HCD && DEBUG_FS help Say "y" to see some FHCI debug information and statistics - throught debugfs. + through debugfs. config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index f86d3fa20214..333ddc156919 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -644,7 +644,7 @@ static inline void ehci_writel(const struct ehci_hcd *ehci, /* * On certain ppc-44x SoC there is a HW issue, that could only worked around with * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch. - * Other common bits are dependant on has_amcc_usb23 quirk flag. + * Other common bits are dependent on has_amcc_usb23 quirk flag. */ #ifdef CONFIG_44x static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational) diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index b84ff7e51896..19223c7449e1 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -401,7 +401,7 @@ static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, /* 1 td fro setup,1 for ack */ size = 2; case PIPE_BULK: - /* one td for every 4096 bytes(can be upto 8k) */ + /* one td for every 4096 bytes(can be up to 8k) */ size += urb->transfer_buffer_length / 4096; /* ...add for any remaining bytes... */ if ((urb->transfer_buffer_length % 4096) != 0) diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index 38fe058fbe61..0ea577bfca2a 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -40,7 +40,7 @@ #define TD_RXER 0x0020 /* Rx error or not */ #define TD_NAK 0x0010 /* No ack. */ -#define TD_STAL 0x0008 /* Stall recieved */ +#define TD_STAL 0x0008 /* Stall received */ #define TD_TO 0x0004 /* time out */ #define TD_UN 0x0002 /* underrun */ #define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */ @@ -274,7 +274,7 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep, * It is also preparing the TDs for new frames. If the Tx interrupts * are disabled, the application should call that routine to get * confirmation about the submitted frames. Otherwise, the routine is - * called frome the interrupt service routine during the Tx interrupt. + * called from the interrupt service routine during the Tx interrupt. * In that case the application is informed by calling the application * specific 'fhci_transaction_confirm' routine */ @@ -337,7 +337,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb) pkt->status = USB_TD_RX_ER_NONOCT; else fhci_err(usb->fhci, "illegal error " - "occured\n"); + "occurred\n"); } else if (td_status & TD_NAK) pkt->status = USB_TD_TX_ER_NAK; else if (td_status & TD_TO) @@ -347,7 +347,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb) else if (td_status & TD_STAL) pkt->status = USB_TD_TX_ER_STALL; else - fhci_err(usb->fhci, "illegal error occured\n"); + fhci_err(usb->fhci, "illegal error occurred\n"); } else if ((extra_data & TD_TOK_IN) && pkt->len > td_length - CRC_SIZE) { pkt->status = USB_TD_RX_DATA_UNDERUN; diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index 71c3caaea4c1..dc6939a44a1a 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -82,7 +82,7 @@ #define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */ #define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */ #define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */ -#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */ +#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occurred */ #define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */ #define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */ #define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */ @@ -363,7 +363,7 @@ struct ed { struct td { void *data; /* a pointer to the data buffer */ unsigned int len; /* length of the data to be submitted */ - unsigned int actual_len; /* actual bytes transfered on this td */ + unsigned int actual_len; /* actual bytes transferred on this td */ enum fhci_ta_type type; /* transaction type */ u8 toggle; /* toggle for next trans. within this TD */ u16 iso_index; /* ISO transaction index */ diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 2562e92e3178..af05718bdc73 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1323,7 +1323,7 @@ static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof) * (and hence no interrupt occurs). * This causes the transfer in question to hang. * The kludge below checks for this condition at each SOF and processes any - * blocked ETDs (after an arbitary 10 frame wait) + * blocked ETDs (after an arbitrary 10 frame wait) * * With a single active transfer the usbtest test suite will run for days * without the kludge. diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h index 12db961acdfb..9a2c400e6090 100644 --- a/drivers/usb/host/isp116x.h +++ b/drivers/usb/host/isp116x.h @@ -13,7 +13,7 @@ /* Full speed: max # of bytes to transfer for a single urb at a time must be < 1024 && must be multiple of 64. - 832 allows transfering 4kiB within 5 frames. */ + 832 allows transferring 4kiB within 5 frames. */ #define MAX_TRANSFER_SIZE_FULLSPEED 832 /* Low speed: there is no reason to schedule in very big diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 662cd002adfc..f97570a847ca 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -546,7 +546,7 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep) if (usb_pipecontrol(urb->pipe)) { ep->nextpid = USB_PID_ACK; /* save the data underrun error code for later and - * procede with the status stage + * proceed with the status stage */ urb->actual_length += PTD_GET_COUNT(ptd); BUG_ON(urb->actual_length > urb->transfer_buffer_length); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index e7288639edb0..d55723514860 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -162,7 +162,7 @@ static int ohci_urb_enqueue ( // case PIPE_INTERRUPT: // case PIPE_BULK: default: - /* one TD for every 4096 Bytes (can be upto 8K) */ + /* one TD for every 4096 Bytes (can be up to 8K) */ size += urb->transfer_buffer_length / 4096; /* ... and for any remaining bytes ... */ if ((urb->transfer_buffer_length % 4096) != 0) diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 44e4deb362e1..4a771f6cc822 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -2879,7 +2879,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, /* Ok, we have more job to do! :) */ for (i = 0; i < num - 1; i++) { - /* Get free micro URB poll till a free urb is recieved */ + /* Get free micro URB poll till a free urb is received */ do { murb = (struct urb *) oxu_murb_alloc(oxu); @@ -2911,7 +2911,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, /* Last urb requires special handling */ - /* Get free micro URB poll till a free urb is recieved */ + /* Get free micro URB poll till a free urb is received */ do { murb = (struct urb *) oxu_murb_alloc(oxu); if (!murb) diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index dc0ab8382f5d..d6e175428618 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -739,7 +739,7 @@ static int get_urb_status_from_qtd(struct urb *urb, u32 status) * process_inactive_qtd - process an inactive (but not halted) qTD. * * Update the urb with the transfer bytes from the qTD, if the urb is - * completely transfered or (in the case of an IN only) the LPF is + * completely transferred or (in the case of an IN only) the LPF is * set, then the transfer is complete and the urb should be returned * to the system. */ diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9a3645fd759b..196e0181b2ed 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -741,7 +741,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) int retval; /* Wait a bit if either of the roothubs need to settle from the - * transistion into bus suspend. + * transition into bus suspend. */ if (time_before(jiffies, xhci->bus_state[0].next_statechange) || time_before(jiffies, @@ -2072,7 +2072,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, return -EINVAL; } vdev = xhci->devs[udev->slot_id]; - /* Mark each endpoint as being in transistion, so + /* Mark each endpoint as being in transition, so * xhci_urb_enqueue() will reject all URBs. */ for (i = 0; i < num_eps; i++) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 711de253bc0f..07e263063e37 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -873,7 +873,7 @@ struct xhci_transfer_event { #define COMP_CMD_ABORT 25 /* Stopped - transfer was terminated by a stop endpoint command */ #define COMP_STOP 26 -/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */ +/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */ #define COMP_STOP_INVAL 27 /* Control Abort Error - Debug Capability - control pipe aborted */ #define COMP_DBG_ABORT 28 diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index c90c89dc0003..a0037961e5bd 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -69,7 +69,7 @@ * 20000513 added IDs for all products supported by Windows driver (john) * 20000514 Rewrote mts_scsi_queuecommand to use URBs (john) * 20000514 Version 0.0.8j - * 20000514 Fix reporting of non-existant devices to SCSI layer (john) + * 20000514 Fix reporting of non-existent devices to SCSI layer (john) * 20000514 Added MTS_DEBUG_INT (john) * 20000514 Changed "usb-microtek" to "microtek" for consistency (john) * 20000514 Stupid bug fixes (john) @@ -557,14 +557,14 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc) if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len ) ) { pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image); - MTS_DEBUG( "transfering from desc->ep_image == %d\n", + MTS_DEBUG( "transferring from desc->ep_image == %d\n", (int)desc->ep_image ); } else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) { pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response); - MTS_DEBUG( "transfering from desc->ep_response == %d\n", + MTS_DEBUG( "transferring from desc->ep_response == %d\n", (int)desc->ep_response); } else { - MTS_DEBUG("transfering to desc->ep_out == %d\n", + MTS_DEBUG("transferring to desc->ep_out == %d\n", (int)desc->ep_out); pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out); } diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index e573e4704015..a2190b983f52 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -40,7 +40,7 @@ #ifdef CONFIG_USB_DYNAMIC_MINORS #define IOWARRIOR_MINOR_BASE 0 #else -#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not offical yet +#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not official yet #endif /* interrupt input queue size */ diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index 8c6fdef61d1c..e25700f44b6f 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -1531,7 +1531,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) i2c_set_clientdata(i2c, isp); isp->client = i2c; - /* verify the chip (shouldn't be necesary) */ + /* verify the chip (shouldn't be necessary) */ status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); if (status != I2C_VENDOR_ID_PHILIPS) { dev_dbg(&i2c->dev, "not philips id: %d\n", status); diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c index 7f9b8cd4514b..e973ff19c55a 100644 --- a/drivers/usb/otg/langwell_otg.c +++ b/drivers/usb/otg/langwell_otg.c @@ -580,7 +580,7 @@ static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers) time = TB_BUS_SUSPEND; break; default: - dev_dbg(lnw->dev, "unkown timer, cannot enable it\n"); + dev_dbg(lnw->dev, "unknown timer, cannot enable it\n"); return; } @@ -1381,7 +1381,7 @@ static void langwell_otg_work(struct work_struct *work) } else if (!iotg->hsm.a_bus_req && iotg->otg.host && iotg->otg.host->b_hnp_enable) { /* It is not safe enough to do a fast - * transistion from A_WAIT_BCON to + * transition from A_WAIT_BCON to * A_SUSPEND */ msleep(10000); if (iotg->hsm.a_bus_req) diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 0db6ace16f7b..aba201cb872c 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -16,7 +16,7 @@ * When reading the process is almost equal except that the header starts with * 0x00 0x20. * - * The device simply need some stuff to understand data comming from the usb + * The device simply need some stuff to understand data coming from the usb * buffer: The First and Second byte is used for a Header, the Third and Fourth * tells the device the amount of information the package holds. * Packages are 60 bytes long Header Stuff. @@ -30,7 +30,7 @@ * one. * * The driver registers himself with the USB-serial core and the USB Core. I had - * to implement a probe function agains USB-serial, because other way, the + * to implement a probe function against USB-serial, because other way, the * driver was attaching himself to both interfaces. I have tryed with different * configurations of usb_serial_driver with out exit, only the probe function * could handle this correctly. diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 4df3e0cecbae..0f11afdda134 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -101,7 +101,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ - { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ + { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 987e9bf7bd02..d9906eb9d16a 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -35,7 +35,7 @@ * * Lonnie Mendez <dignome@gmail.com> * 04-10-2004 - * Driver modified to support dynamic line settings. Various improvments + * Driver modified to support dynamic line settings. Various improvements * and features. * * Neil Whelchel diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 65967b36365f..a973c7a29d6e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -17,7 +17,7 @@ * See Documentation/usb/usb-serial.txt for more information on using this * driver * - * See http://ftdi-usb-sio.sourceforge.net for upto date testing info + * See http://ftdi-usb-sio.sourceforge.net for up to date testing info * and extra documentation * * Change entries from 2004 and earlier can be found in versions of this diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index f1aedfa7c420..abf095be5753 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1981,7 +1981,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, if (code == IOSP_STATUS_OPEN_RSP) { edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); edge_port->maxTxCredits = edge_port->txCredits; - dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits); + dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits); handle_new_msr(edge_port, byte2); /* send the current line settings to the port so we are diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h index dced7ec65470..ad9c1d47a619 100644 --- a/drivers/usb/serial/io_edgeport.h +++ b/drivers/usb/serial/io_edgeport.h @@ -68,7 +68,7 @@ struct comMapper { #define PROC_SET_COM_ENTRY 2 -/* The following sturcture is passed to the write */ +/* The following structure is passed to the write */ struct procWrite { int Command; union { diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index d8434910fa7b..0aac00afb5c8 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -433,7 +433,7 @@ static int write_i2c_mem(struct edgeport_serial *serial, /* We can only send a maximum of 1 aligned byte page at a time */ - /* calulate the number of bytes left in the first page */ + /* calculate the number of bytes left in the first page */ write_length = EPROM_PAGE_SIZE - (start_address & (EPROM_PAGE_SIZE - 1)); diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 201f6096844b..a6f63cc8c130 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -116,7 +116,7 @@ static void opticon_read_bulk_callback(struct urb *urb) } else { if ((data[0] == 0x00) && (data[1] == 0x01)) { spin_lock_irqsave(&priv->lock, flags); - /* CTS status infomation package */ + /* CTS status information package */ if (data[2] == 0x00) priv->cts = false; else diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 08e03745e251..0e5aafda4537 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -562,7 +562,7 @@ static int ene_sd_init(struct us_data *us) result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Exection SD Init Code Fail !!\n"); + US_DEBUGP("Execution SD Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -581,7 +581,7 @@ static int ene_sd_init(struct us_data *us) result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Exection SD Init Code Fail !!\n"); + US_DEBUGP("Execution SD Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 6b9982cd5423..09e52ba47ddf 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -1510,7 +1510,7 @@ static int isd200_Initialization(struct us_data *us) * Protocol and Transport for the ISD200 ASIC * * This protocol and transport are for ATA devices connected to an ISD200 - * ASIC. An ATAPI device that is conected as a slave device will be + * ASIC. An ATAPI device that is connected as a slave device will be * detected in the driver initialization function and the protocol will * be changed to an ATAPI protocol (Transparent SCSI). * diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 689ee1fb702a..13b8bcdf3dba 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -123,7 +123,7 @@ static int slave_configure(struct scsi_device *sdev) { struct us_data *us = host_to_us(sdev->host); - /* Many devices have trouble transfering more than 32KB at a time, + /* Many devices have trouble transferring more than 32KB at a time, * while others have trouble with more than 64K. At this time we * are limiting both to 32K (64 sectores). */ diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index bd3f415893d8..0b00091d2ae9 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -340,7 +340,7 @@ static int usbat_check_status(struct us_data *us) } /* - * Stores critical information in internal registers in prepartion for the execution + * Stores critical information in internal registers in preparation for the execution * of a conditional usbat_read_blocks or usbat_write_blocks call. */ static int usbat_set_shuttle_features(struct us_data *us, diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index 827c87f10cc5..7e4bf95f8f7b 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -180,7 +180,7 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2, * using the 14 bytes of @a to fill up * b1.{mac_header,e0,security_reserved,padding}. * - * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of + * NOTE: The definition of l(a) in WUSB1.0[6.5] vs the definition of * l(m) is orthogonal, they bear no relationship, so it is not * in conflict with the parameter's relation that * WUSB1.0[6.4.2]) defines. @@ -272,7 +272,7 @@ static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc, /* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5] * The procedure is to AES crypt the A0 block and XOR the MIC - * Tag agains it; we only do the first 8 bytes and place it + * Tag against it; we only do the first 8 bytes and place it * directly in the destination buffer. * * POS Crypto API: size is assumed to be AES's block size. diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c index 4ed97360c046..6f4fafdc2401 100644 --- a/drivers/usb/wusbcore/reservation.c +++ b/drivers/usb/wusbcore/reservation.c @@ -71,7 +71,7 @@ static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv) /** * wusbhc_rsv_establish - establish a reservation for the cluster - * @wusbhc: the WUSB HC requesting a bandwith reservation + * @wusbhc: the WUSB HC requesting a bandwidth reservation */ int wusbhc_rsv_establish(struct wusbhc *wusbhc) { diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index c175b7300c73..39de3900ad20 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -133,7 +133,7 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) * big of a problem [and we can't make it an spinlock * because other parts need to take it and sleep] . * - * @usb_hcd is refcounted, so it won't dissapear under us + * @usb_hcd is refcounted, so it won't disappear under us * and before killing a host, the polling of the root hub * would be stopped anyway. */ diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c index 8cb9d80207fa..ca80171f42c6 100644 --- a/drivers/usb/wusbcore/wa-rpipe.c +++ b/drivers/usb/wusbcore/wa-rpipe.c @@ -24,7 +24,7 @@ * * RPIPE * - * Targetted at different downstream endpoints + * Targeted at different downstream endpoints * * Descriptor: use to config the remote pipe. * diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 84b744c428a4..6ccd93a9b909 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -61,7 +61,7 @@ * * Two methods it could be done: * - * (a) set up a timer everytime an rpipe's use count drops to 1 + * (a) set up a timer every time an rpipe's use count drops to 1 * (which means unused) or when a transfer ends. Reset the * timer when a xfer is queued. If the timer expires, release * the rpipe [see rpipe_ep_disable()]. @@ -140,7 +140,7 @@ struct wa_xfer { struct wahc *wa; /* Wire adapter we are plugged to */ struct usb_host_endpoint *ep; - struct urb *urb; /* URB we are transfering for */ + struct urb *urb; /* URB we are transferring for */ struct wa_seg **seg; /* transfer segments */ u8 segs, segs_submitted, segs_done; unsigned is_inbound:1; @@ -161,7 +161,7 @@ static inline void wa_xfer_init(struct wa_xfer *xfer) } /* - * Destory a transfer structure + * Destroy a transfer structure * * Note that the xfer->seg[index] thingies follow the URB life cycle, * so we need to put them, not free them. @@ -494,7 +494,7 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, * function does almost the same thing and they work closely * together. * - * If the seg request has failed but this DTO phase has suceeded, + * If the seg request has failed but this DTO phase has succeeded, * wa_seg_cb() has already failed the segment and moved the * status to WA_SEG_ERROR, so this will go through 'case 0' and * effectively do nothing. diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h index 6bd426b7ec07..3a2d09162e70 100644 --- a/drivers/usb/wusbcore/wusbhc.h +++ b/drivers/usb/wusbcore/wusbhc.h @@ -231,7 +231,7 @@ struct wusb_port { * * Most of the times when you need to use it, it will be non-NULL, * so there is no real need to check for it (wusb_dev will - * dissapear before usb_dev). + * disappear before usb_dev). * * - The following fields need to be filled out before calling * wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}. |