Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
  x86: Clean up apic.c and apic.h
  x86: Remove superflous goal definition of tsc_sync
  x86: dt: Correct local apic documentation in device tree bindings
  x86: dt: Cleanup local apic setup
  x86: dt: Fix OLPC=y/INTEL_CE=n build
  rtc: cmos: Add OF bindings
  x86: ce4100: Use OF to setup devices
  x86: ioapic: Add OF bindings for IO_APIC
  x86: dtb: Add generic bus probe
  x86: dtb: Add support for PCI devices backed by dtb nodes
  x86: dtb: Add device tree support for HPET
  x86: dtb: Add early parsing of IO_APIC
  x86: dtb: Add irq domain abstraction
  x86: dtb: Add a device tree for CE4100
  x86: Add device tree support
  x86: e820: Remove conditional early mapping in parse_e820_ext
  x86: OLPC: Make OLPC=n build again
  x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection
  x86: OLPC: Cleanup config maze completely
  x86: OLPC: Hide OLPC_OPENFIRMWARE config switch
  ...

Fix up conflicts in arch/x86/platform/ce4100/ce4100.c

12 files changed, 160 insertions, 35 deletions

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 61653f079671..1b46a9d9f907 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -330,9 +330,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 	i2c->adap = ocores_adapter;
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
-#ifdef CONFIG_OF
 	i2c->adap.dev.of_node = pdev->dev.of_node;
-#endif
 
 	/* add i2c adapter to i2c tree */
 	ret = i2c_add_adapter(&i2c->adap);
@@ -390,15 +388,11 @@ static int ocores_i2c_resume(struct platform_device *pdev)
 #define ocores_i2c_resume	NULL
 #endif
 
-#ifdef CONFIG_OF
 static struct of_device_id ocores_i2c_match[] = {
-        {
-                .compatible = "opencores,i2c-ocores",
-        },
-        {},
+	{ .compatible = "opencores,i2c-ocores", },
+	{},
 };
 MODULE_DEVICE_TABLE(of, ocores_i2c_match);
-#endif
 
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:ocores-i2c");
@@ -411,9 +405,7 @@ static struct platform_driver ocores_i2c_driver = {
 	.driver  = {
 		.owner = THIS_MODULE,
 		.name = "ocores-i2c",
-#ifdef CONFIG_OF
-                .of_match_table = ocores_i2c_match,
-#endif
+		.of_match_table = ocores_i2c_match,
 	},
 };
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index f0bd5bcdf563..045ba6efea48 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -537,9 +537,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->dev.parent = &client->adapter->dev;
 	client->dev.bus = &i2c_bus_type;
 	client->dev.type = &i2c_client_type;
-#ifdef CONFIG_OF
 	client->dev.of_node = info->of_node;
-#endif
 
 	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
 		     client->addr);
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index fd877f633dd2..2f7fc0c5146f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1516,21 +1516,17 @@ static int __devexit mmc_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
-#if defined(CONFIG_OF)
 static struct of_device_id mmc_spi_of_match_table[] __devinitdata = {
 	{ .compatible = "mmc-spi-slot", },
 	{},
 };
-#endif
 
 static struct spi_driver mmc_spi_driver = {
 	.driver = {
 		.name =		"mmc_spi",
 		.bus =		&spi_bus_type,
 		.owner =	THIS_MODULE,
-#if defined(CONFIG_OF)
 		.of_match_table = mmc_spi_of_match_table,
-#endif
 	},
 	.probe =	mmc_spi_probe,
 	.remove =	__devexit_p(mmc_spi_remove),
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index b79d7e1555d5..db0290f05bdf 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -1163,15 +1163,11 @@ static int ethoc_resume(struct platform_device *pdev)
 # define ethoc_resume  NULL
 #endif
 
-#ifdef CONFIG_OF
 static struct of_device_id ethoc_match[] = {
-	{
-		.compatible = "opencores,ethoc",
-	},
+	{ .compatible = "opencores,ethoc", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ethoc_match);
-#endif
 
 static struct platform_driver ethoc_driver = {
 	.probe   = ethoc_probe,
@@ -1181,9 +1177,7 @@ static struct platform_driver ethoc_driver = {
 	.driver  = {
 		.name = "ethoc",
 		.owner = THIS_MODULE,
-#ifdef CONFIG_OF
 		.of_match_table = ethoc_match,
-#endif
 	},
 };
 
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3c6e100a3ad0..d06a6374ed6c 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -69,4 +69,10 @@ config OF_MDIO
 	help
 	  OpenFirmware MDIO bus (Ethernet PHY) accessors
 
+config OF_PCI
+	def_tristate PCI
+	depends on PCI && (PPC || MICROBLAZE || X86)
+	help
+	  OpenFirmware PCI bus accessors
+
 endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 3ab21a0a4907..f7861ed2f287 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_OF_I2C)	+= of_i2c.o
 obj-$(CONFIG_OF_NET)	+= of_net.o
 obj-$(CONFIG_OF_SPI)	+= of_spi.o
 obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
+obj-$(CONFIG_OF_PCI)	+= of_pci.o
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
new file mode 100644
index 000000000000..ac1ec54e4fd5
--- /dev/null
+++ b/drivers/of/of_pci.c
@@ -0,0 +1,92 @@
+#include <linux/kernel.h>
+#include <linux/of_pci.h>
+#include <linux/of_irq.h>
+#include <asm/prom.h>
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:       the device whose interrupt is to be resolved
+ * @out_irq:    structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+	struct device_node *dn, *ppnode;
+	struct pci_dev *ppdev;
+	u32 lspec;
+	__be32 lspec_be;
+	__be32 laddr[3];
+	u8 pin;
+	int rc;
+
+	/* Check if we have a device node, if yes, fallback to standard
+	 * device tree parsing
+	 */
+	dn = pci_device_to_OF_node(pdev);
+	if (dn) {
+		rc = of_irq_map_one(dn, 0, out_irq);
+		if (!rc)
+			return rc;
+	}
+
+	/* Ok, we don't, time to have fun. Let's start by building up an
+	 * interrupt spec.  we assume #interrupt-cells is 1, which is standard
+	 * for PCI. If you do different, then don't use that routine.
+	 */
+	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+	if (rc != 0)
+		return rc;
+	/* No pin, exit */
+	if (pin == 0)
+		return -ENODEV;
+
+	/* Now we walk up the PCI tree */
+	lspec = pin;
+	for (;;) {
+		/* Get the pci_dev of our parent */
+		ppdev = pdev->bus->self;
+
+		/* Ouch, it's a host bridge... */
+		if (ppdev == NULL) {
+			ppnode = pci_bus_to_OF_node(pdev->bus);
+
+			/* No node for host bridge ? give up */
+			if (ppnode == NULL)
+				return -EINVAL;
+		} else {
+			/* We found a P2P bridge, check if it has a node */
+			ppnode = pci_device_to_OF_node(ppdev);
+		}
+
+		/* Ok, we have found a parent with a device-node, hand over to
+		 * the OF parsing code.
+		 * We build a unit address from the linux device to be used for
+		 * resolution. Note that we use the linux bus number which may
+		 * not match your firmware bus numbering.
+		 * Fortunately, in most cases, interrupt-map-mask doesn't
+		 * include the bus number as part of the matching.
+		 * You should still be careful about that though if you intend
+		 * to rely on this function (you ship  a firmware that doesn't
+		 * create device nodes for all PCI devices).
+		 */
+		if (ppnode)
+			break;
+
+		/* We can only get here if we hit a P2P bridge with no node,
+		 * let's do standard swizzling and try again
+		 */
+		lspec = pci_swizzle_interrupt_pin(pdev, lspec);
+		pdev = ppdev;
+	}
+
+	lspec_be = cpu_to_be32(lspec);
+	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
+	laddr[1]  = laddr[2] = cpu_to_be32(0);
+	return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index dc2a0ba969ce..911e75cdc125 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -37,6 +37,8 @@
 #include <linux/mod_devicetable.h>
 #include <linux/log2.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
@@ -1057,6 +1059,47 @@ static struct pnp_driver cmos_pnp_driver = {
 
 #endif	/* CONFIG_PNP */
 
+#ifdef CONFIG_OF
+static const struct of_device_id of_cmos_match[] = {
+	{
+		.compatible = "motorola,mc146818",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_cmos_match);
+
+static __init void cmos_of_init(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct rtc_time time;
+	int ret;
+	const __be32 *val;
+
+	if (!node)
+		return;
+
+	val = of_get_property(node, "ctrl-reg", NULL);
+	if (val)
+		CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
+
+	val = of_get_property(node, "freq-reg", NULL);
+	if (val)
+		CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
+
+	get_rtc_time(&time);
+	ret = rtc_valid_tm(&time);
+	if (ret) {
+		struct rtc_time def_time = {
+			.tm_year = 1,
+			.tm_mday = 1,
+		};
+		set_rtc_time(&def_time);
+	}
+}
+#else
+static inline void cmos_of_init(struct platform_device *pdev) {}
+#define of_cmos_match NULL
+#endif
 /*----------------------------------------------------------------*/
 
 /* Platform setup should have set up an RTC device, when PNP is
@@ -1065,6 +1108,7 @@ static struct pnp_driver cmos_pnp_driver = {
 
 static int __init cmos_platform_probe(struct platform_device *pdev)
 {
+	cmos_of_init(pdev);
 	cmos_wake_setup(&pdev->dev);
 	return cmos_do_probe(&pdev->dev,
 			platform_get_resource(pdev, IORESOURCE_IO, 0),
@@ -1096,6 +1140,7 @@ static struct platform_driver cmos_platform_driver = {
 #ifdef CONFIG_PM
 		.pm		= &cmos_pm_ops,
 #endif
+		.of_match_table = of_cmos_match,
 	}
 };
 
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
index 4db96fa306fc..b86bc328463b 100644
--- a/drivers/rtc/rtc-mrst.c
+++ b/drivers/rtc/rtc-mrst.c
@@ -62,6 +62,17 @@ static inline int is_intr(u8 rtc_intr)
 	return rtc_intr & RTC_IRQMASK;
 }
 
+static inline unsigned char vrtc_is_updating(void)
+{
+	unsigned char uip;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	uip = (vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return uip;
+}
+
 /*
  * rtc_time's year contains the increment over 1900, but vRTC's YEAR
  * register can't be programmed to value larger than 0x64, so vRTC
@@ -76,7 +87,7 @@ static int mrst_read_time(struct device *dev, struct rtc_time *time)
 {
 	unsigned long flags;
 
-	if (rtc_is_updating())
+	if (vrtc_is_updating())
 		mdelay(20);
 
 	spin_lock_irqsave(&rtc_lock, flags);
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 95928833855b..a429b01d0285 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1557,9 +1557,7 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
 	drv_data->ssp = ssp;
 
 	master->dev.parent = &pdev->dev;
-#ifdef CONFIG_OF
 	master->dev.of_node = pdev->dev.of_node;
-#endif
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c
index 19752b09e155..378e504f89eb 100644
--- a/drivers/spi/pxa2xx_spi_pci.c
+++ b/drivers/spi/pxa2xx_spi_pci.c
@@ -89,9 +89,7 @@ static int __devinit ce4100_spi_probe(struct pci_dev *dev,
 		goto err_nomem;
 
 	pdev->dev.parent = &dev->dev;
-#ifdef CONFIG_OF
 	pdev->dev.of_node = dev->dev.of_node;
-#endif
 	ssp = &spi_info->ssp;
 	ssp->phys_base = pci_resource_start(dev, 0);
 	ssp->mmio_base = ioremap(phys_beg, phys_len);
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 7adaef62a991..4d2c75df886c 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -351,14 +351,12 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id xilinx_spi_of_match[] = {
 	{ .compatible = "xlnx,xps-spi-2.00.a", },
 	{ .compatible = "xlnx,xps-spi-2.00.b", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
-#endif
 
 struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
 	u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word)
@@ -394,9 +392,7 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
 
 	master->bus_num = bus_num;
 	master->num_chipselect = num_cs;
-#ifdef CONFIG_OF
 	master->dev.of_node = dev->of_node;
-#endif
 
 	xspi->mem = *mem;
 	xspi->irq = irq;
@@ -539,9 +535,7 @@ static struct platform_driver xilinx_spi_driver = {
 	.driver = {
 		.name = XILINX_SPI_NAME,
 		.owner = THIS_MODULE,
-#ifdef CONFIG_OF
 		.of_match_table = xilinx_spi_of_match,
-#endif
 	},
 };