summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/w83627hf4
-rw-r--r--drivers/hwmon/w83627hf.c27
2 files changed, 0 insertions, 31 deletions
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 880a59f53da9..6ee36dbafd64 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -40,10 +40,6 @@ Module Parameters
(default is 1)
Use 'init=0' to bypass initializing the chip.
Try this if your computer crashes when you load the module.
-* reset: int
- (default is 0)
- The driver used to reset the chip on load, but does no more. Use
- 'reset=1' to restore the old behavior. Report if you need to do this.
Description
-----------
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index ba8b069b1082..b30e5796cb26 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0);
MODULE_PARM_DESC(force_i2c,
"Initialize the i2c address of the sensors");
-static int reset;
-module_param(reset, bool, 0);
-MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-
static int init = 1;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
@@ -1600,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev)
enum chips type = data->type;
u8 tmp;
- if (reset) {
- /* Resetting the chip has been the default for a long time,
- but repeatedly caused problems (fans going to full
- speed...) so it is now optional. It might even go away if
- nobody reports it as being useful, as I see very little
- reason why this would be needed at all. */
- dev_info(&pdev->dev, "If reset=1 solved a problem you were "
- "having, please report!\n");
-
- /* save this register */
- i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG);
- /* Reset all except Watchdog values and last conversion values
- This sets fan-divs to 2, among others */
- w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80);
- /* Restore the register and disable power-on abnormal beep.
- This saves FAN 1/2/3 input/output values set by BIOS. */
- w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
- /* Disable master beep-enable (reset turns it on).
- Individual beeps should be reset to off but for some reason
- disabling this bit helps some people not get beeped */
- w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0);
- }
-
/* Minimize conflicts with other winbond i2c-only clients... */
/* disable i2c subclients... how to disable main i2c client?? */
/* force i2c address to relatively uncommon address */