diff options
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/rockchip-thermal.txt | 3 | ||||
| -rw-r--r-- | MAINTAINERS | 4 | ||||
| -rw-r--r-- | drivers/thermal/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/thermal/Makefile | 3 | ||||
| -rw-r--r-- | drivers/thermal/db8500_thermal.c | 1 | ||||
| -rw-r--r-- | drivers/thermal/devfreq_cooling.c | 5 | ||||
| -rw-r--r-- | drivers/thermal/int340x_thermal/int3400_thermal.c | 2 | ||||
| -rw-r--r-- | drivers/thermal/intel_pch_thermal.c | 64 | ||||
| -rw-r--r-- | drivers/thermal/max77620_thermal.c | 1 | ||||
| -rw-r--r-- | drivers/thermal/qcom-spmi-temp-alarm.c | 6 | ||||
| -rw-r--r-- | drivers/thermal/rockchip_thermal.c | 7 | ||||
| -rw-r--r-- | drivers/thermal/tango_thermal.c | 1 | ||||
| -rw-r--r-- | drivers/thermal/thermal_core.c | 1444 | ||||
| -rw-r--r-- | drivers/thermal/thermal_core.h | 26 | ||||
| -rw-r--r-- | drivers/thermal/thermal_helpers.c | 226 | ||||
| -rw-r--r-- | drivers/thermal/thermal_hwmon.c | 4 | ||||
| -rw-r--r-- | drivers/thermal/thermal_sysfs.c | 771 | ||||
| -rw-r--r-- | drivers/thermal/ti-soc-thermal/ti-bandgap.c | 5 | ||||
| -rw-r--r-- | drivers/thermal/x86_pkg_temp_thermal.c | 587 | ||||
| -rw-r--r-- | include/linux/devfreq_cooling.h | 9 | ||||
| -rw-r--r-- | include/linux/thermal.h | 2 |
21 files changed, 1649 insertions, 1526 deletions
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index 08efe6bc2193..43003aec94bd 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -22,10 +22,13 @@ Required properties: TSADC controller. - pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend. - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. + +Optional properties: - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. - rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. - rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW 1:HIGH. +- rockchip,grf : The phandle of the syscon node for the general register file. Exiample: tsadc: tsadc@ff280000 { diff --git a/MAINTAINERS b/MAINTAINERS index 188534bfd7e1..c97a29527a21 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9838,7 +9838,7 @@ F: drivers/media/usb/pwc/* PWM FAN DRIVER M: Kamil Debski <kamil@wypas.org> -M: Lukasz Majewski <l.majewski@samsung.com> +M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> L: linux-hwmon@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -10609,7 +10609,7 @@ L: netdev@vger.kernel.org F: drivers/net/ethernet/samsung/sxgbe/ SAMSUNG THERMAL DRIVER -M: Lukasz Majewski <l.majewski@samsung.com> +M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> L: linux-pm@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Supported diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index a13541bdc726..c2c056cc7ea5 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -177,8 +177,10 @@ config THERMAL_EMULATION config HISI_THERMAL tristate "Hisilicon thermal driver" - depends on (ARCH_HISI && CPU_THERMAL && OF) || COMPILE_TEST + depends on ARCH_HISI || COMPILE_TEST depends on HAS_IOMEM + depends on OF + default y help Enable this to plug hisilicon's thermal sensor driver into the Linux thermal framework. cpufreq is used as the cooling device to throttle diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index c92eb22a41ff..6a3d7b573036 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -3,7 +3,8 @@ # obj-$(CONFIG_THERMAL) += thermal_sys.o -thermal_sys-y += thermal_core.o +thermal_sys-y += thermal_core.o thermal_sysfs.o \ + thermal_helpers.o # interface to/from other layers providing sensors thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c index e776cea80cfc..f491faf16592 100644 --- a/drivers/thermal/db8500_thermal.c +++ b/drivers/thermal/db8500_thermal.c @@ -512,6 +512,7 @@ static const struct of_device_id db8500_thermal_match[] = { { .compatible = "stericsson,db8500-thermal" }, {}, }; +MODULE_DEVICE_TABLE(of, db8500_thermal_match); #endif static struct platform_driver db8500_thermal_driver = { diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c index 81631b110e17..5a737fd5f1aa 100644 --- a/drivers/thermal/devfreq_cooling.c +++ b/drivers/thermal/devfreq_cooling.c @@ -238,7 +238,7 @@ get_static_power(struct devfreq_cooling_device *dfc, unsigned long freq) return 0; } - return dfc->power_ops->get_static_power(voltage); + return dfc->power_ops->get_static_power(df, voltage); } /** @@ -262,7 +262,8 @@ get_dynamic_power(struct devfreq_cooling_device *dfc, unsigned long freq, struct devfreq_cooling_power *dfc_power = dfc->power_ops; if (dfc_power->get_dynamic_power) - return dfc_power->get_dynamic_power(freq, voltage); + return dfc_power->get_dynamic_power(dfc->devfreq, freq, + voltage); freq_mhz = freq / 1000000; power = (u64)dfc_power->dyn_power_coeff * freq_mhz * voltage * voltage; diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c index 5836e5554433..9413c4abf0b9 100644 --- a/drivers/thermal/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/int340x_thermal/int3400_thermal.c @@ -96,7 +96,7 @@ static ssize_t current_uuid_store(struct device *dev, return -EINVAL; } -static DEVICE_ATTR(current_uuid, 0644, current_uuid_show, current_uuid_store); +static DEVICE_ATTR_RW(current_uuid); static DEVICE_ATTR_RO(available_uuids); static struct attribute *uuid_attrs[] = { &dev_attr_available_uuids.attr, diff --git a/drivers/thermal/intel_pch_thermal.c b/drivers/thermal/intel_pch_thermal.c index 19bf2028e508..2b49e8d0fe9e 100644 --- a/drivers/thermal/intel_pch_thermal.c +++ b/drivers/thermal/intel_pch_thermal.c @@ -29,6 +29,7 @@ #define PCH_THERMAL_DID_HSW_2 0x8C24 /* Haswell PCH */ #define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */ #define PCH_THERMAL_DID_SKL 0x9D31 /* Skylake PCH */ +#define PCH_THERMAL_DID_SKL_H 0xA131 /* Skylake PCH 100 series */ /* Wildcat Point-LP PCH Thermal registers */ #define WPT_TEMP 0x0000 /* Temperature */ @@ -273,37 +274,44 @@ static struct thermal_zone_device_ops tzd_ops = { .get_trip_temp = pch_get_trip_temp, }; +enum board_ids { + board_hsw, + board_wpt, + board_skl, +}; + +static const struct board_info { + const char *name; + const struct pch_dev_ops *ops; +} board_info[] = { + [board_hsw] = { + .name = "pch_haswell", + .ops = &pch_dev_ops_wpt, + }, + [board_wpt] = { + .name = "pch_wildcat_point", + .ops = &pch_dev_ops_wpt, + }, + [board_skl] = { + .name = "pch_skylake", + .ops = &pch_dev_ops_wpt, + }, +}; static int intel_pch_thermal_probe(struct pci_dev *pdev, const struct pci_device_id *id) { + enum board_ids board_id = id->driver_data; + const struct board_info *bi = &board_info[board_id]; struct pch_thermal_device *ptd; int err; int nr_trips; - char *dev_name; ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL); if (!ptd) return -ENOMEM; - switch (pdev->device) { - case PCH_THERMAL_DID_WPT: - ptd->ops = &pch_dev_ops_wpt; - dev_name = "pch_wildcat_point"; - break; - case PCH_THERMAL_DID_SKL: - ptd->ops = &pch_dev_ops_wpt; - dev_name = "pch_skylake"; - break; - case PCH_THERMAL_DID_HSW_1: - case PCH_THERMAL_DID_HSW_2: - ptd->ops = &pch_dev_ops_wpt; - dev_name = "pch_haswell"; - break; - default: - dev_err(&pdev->dev, "unknown pch thermal device\n"); - return -ENODEV; - } + ptd->ops = bi->ops; pci_set_drvdata(pdev, ptd); ptd->pdev = pdev; @@ -331,11 +339,11 @@ static int intel_pch_thermal_probe(struct pci_dev *pdev, if (err) goto error_cleanup; - ptd->tzd = thermal_zone_device_register(dev_name, nr_trips, 0, ptd, + ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0, ptd, &tzd_ops, NULL, 0, 0); if (IS_ERR(ptd->tzd)) { dev_err(&pdev->dev, "Failed to register thermal zone %s\n", - dev_name); + bi->name); err = PTR_ERR(ptd->tzd); goto error_cleanup; } @@ -380,10 +388,16 @@ static int intel_pch_thermal_resume(struct device *device) } static struct pci_device_id intel_pch_thermal_id[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1), + .driver_data = board_hsw, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2), + .driver_data = board_hsw, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT), + .driver_data = board_wpt, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL), + .driver_data = board_skl, }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL_H), + .driver_data = board_skl, }, { 0, }, }; MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id); diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c index 83905ff46e40..e9a1fe342760 100644 --- a/drivers/thermal/max77620_thermal.c +++ b/drivers/thermal/max77620_thermal.c @@ -149,6 +149,7 @@ static struct platform_device_id max77620_thermal_devtype[] = { { .name = "max77620-thermal", }, {}, }; +MODULE_DEVICE_TABLE(platform, max77620_thermal_devtype); static struct platform_driver max77620_thermal_driver = { .driver = { diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c index 819c6d5d7aa7..f50241962ad2 100644 --- a/drivers/thermal/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom-spmi-temp-alarm.c @@ -200,7 +200,7 @@ static int qpnp_tm_probe(struct platform_device *pdev) struct qpnp_tm_chip *chip; struct device_node *node; u8 type, subtype; - u32 res[2]; + u32 res; int ret, irq; node = pdev->dev.of_node; @@ -215,7 +215,7 @@ static int qpnp_tm_probe(struct platform_device *pdev) if (!chip->map) return -ENXIO; - ret = of_property_read_u32_array(node, "reg", res, 2); + ret = of_property_read_u32(node, "reg", &res); if (ret < 0) return ret; @@ -228,7 +228,7 @@ static int qpnp_tm_probe(struct platform_device *pdev) if (PTR_ERR(chip->adc) == -EPROBE_DEFER) return PTR_ERR(chip->adc); - chip->base = res[0]; + chip->base = res; ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type); if (ret < 0) { diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index e227a9f0acf7..b811b0fb61b1 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -524,11 +524,6 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs, regs + TSADCV2_AUTO_PERIOD_HT); writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT, regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE); - - if (IS_ERR(grf)) { - pr_warn("%s: Missing rockchip,grf property\n", __func__); - return; - } } /** @@ -971,6 +966,8 @@ static int rockchip_configure_from_dt(struct device *dev, * need this property. */ thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(thermal->grf)) + dev_warn(dev, "Missing rockchip,grf property\n"); return 0; } diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c index 201304aeafeb..4e67795cb6ce 100644 --- a/drivers/thermal/tango_thermal.c +++ b/drivers/thermal/tango_thermal.c @@ -107,6 +107,7 @@ static const struct of_device_id tango_sensor_ids[] = { }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, tango_sensor_ids); static struct platform_driver tango_thermal_driver = { .probe = tango_thermal_probe, diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 911fd964c742..641faab6e24b 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -5,22 +5,9 @@ * Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com> * Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com> * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -64,6 +51,13 @@ static atomic_t in_suspend; static struct thermal_governor *def_governor; +/* + * Governor section: set of functions to handle thermal governors + * + * Functions to help in the life cycle of thermal governors within + * the thermal core and by the thermal governor code. + */ + static struct thermal_governor *__find_governor(const char *name) { struct thermal_governor *pos; @@ -142,11 +136,16 @@ int thermal_register_governor(struct thermal_governor *governor) mutex_lock(&thermal_governor_lock); err = -EBUSY; - if (__find_governor(governor->name) == NULL) { + if (!__find_governor(governor->name)) { + bool match_default; + err = 0; list_add(&governor->governor_list, &thermal_governor_list); - if (!def_governor && !strncmp(governor->name, - DEFAULT_THERMAL_GOVERNOR, THERMAL_NAME_LENGTH)) + match_default = !strncmp(governor->name, + DEFAULT_THERMAL_GOVERNOR, + THERMAL_NAME_LENGTH); + + if (!def_governor && match_default) def_governor = governor; } @@ -188,14 +187,14 @@ void thermal_unregister_governor(struct thermal_governor *governor) mutex_lock(&thermal_governor_lock); - if (__find_governor(governor->name) == NULL) + if (!__find_governor(governor->name)) goto exit; mutex_lock(&thermal_list_lock); list_for_each_entry(pos, &thermal_tz_list, node) { if (!strncasecmp(pos->governor->name, governor->name, - THERMAL_NAME_LENGTH)) + THERMAL_NAME_LENGTH)) thermal_set_governor(pos, NULL); } @@ -203,195 +202,92 @@ void thermal_unregister_governor(struct thermal_governor *governor) list_del(&governor->governor_list); exit: mutex_unlock(&thermal_governor_lock); - return; } -static int get_idr(struct idr *idr, struct mutex *lock, int *id) +int thermal_zone_device_set_policy(struct thermal_zone_device *tz, + char *policy) { - int ret; - - if (lock) - mutex_lock(lock); - ret = idr_alloc(idr, NULL, 0, 0, GFP_KERNEL); - if (lock) - mutex_unlock(lock); - if (unlikely(ret < 0)) - return ret; - *id = ret; - return 0; -} - -static void release_idr(struct idr *idr, struct mutex *lock, int id) -{ - if (lock) - mutex_lock(lock); - idr_remove(idr, id); - if (lock) - mutex_unlock(lock); -} - -int get_tz_trend(struct thermal_zone_device *tz, int trip) -{ - enum thermal_trend trend; - - if (tz->emul_temperature || !tz->ops->get_trend || - tz->ops->get_trend(tz, trip, &trend)) { - if (tz->temperature > tz->last_temperature) - trend = THERMAL_TREND_RAISING; - else if (tz->temperature < tz->last_temperature) - trend = THERMAL_TREND_DROPPING; - else - trend = THERMAL_TREND_STABLE; - } - - return trend; -} -EXPORT_SYMBOL(get_tz_trend); - -struct thermal_instance *get_thermal_instance(struct thermal_zone_device *tz, - struct thermal_cooling_device *cdev, int trip) -{ - struct thermal_instance *pos = NULL; - struct thermal_instance *target_instance = NULL; + struct thermal_governor *gov; + int ret = -EINVAL; + mutex_lock(&thermal_governor_lock); mutex_lock(&tz->lock); - mutex_lock(&cdev->lock); - list_for_each_entry(pos, &tz->thermal_instances, tz_node) { - if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { - target_instance = pos; - break; - } - } + gov = __find_governor(strim(policy)); + if (!gov) + goto exit; - mutex_unlock(&cdev->lock); - mutex_unlock(&tz->lock); + ret = thermal_set_governor(tz, gov); - return target_instance; -} -EXPORT_SYMBOL(get_thermal_instance); +exit: + mutex_unlock(&tz->lock); + mutex_unlock(&thermal_governor_lock); -static void print_bind_err_msg(struct thermal_zone_device *tz, - struct thermal_cooling_device *cdev, int ret) -{ - dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n", - tz->type, cdev->type, ret); + return ret; } -static void __bind(struct thermal_zone_device *tz, int mask, - struct thermal_cooling_device *cdev, - unsigned long *limits, - unsigned int weight) +int thermal_build_list_of_policies(char *buf) { - int i, ret; + struct thermal_governor *pos; + ssize_t count = 0; + ssize_t size = PAGE_SIZE; - for (i = 0; i < tz->trips; i++) { - if (mask & (1 << i)) { - unsigned long upper, lower; + mutex_lock(&thermal_governor_lock); - upper = THERMAL_NO_LIMIT; - lower = THERMAL_NO_LIMIT; - if (limits) { - lower = limits[i * 2]; - upper = limits[i * 2 + 1]; - } - ret = thermal_zone_bind_cooling_device(tz, i, cdev, - upper, lower, - weight); - if (ret) - print_bind_err_msg(tz, cdev, ret); - } + list_for_each_entry(pos, &thermal_governor_list, governor_list) { + size = PAGE_SIZE - count; + count += scnprintf(buf + count, size, "%s ", pos->name); } -} + count += scnprintf(buf + count, size, "\n"); -static void __unbind(struct thermal_zone_device *tz, int mask, - struct thermal_cooling_device *cdev) -{ - int i; + mutex_unlock(&thermal_governor_lock); - for (i = 0; i < tz->trips; i++) - if (mask & (1 << i)) - thermal_zone_unbind_cooling_device(tz, i, cdev); + return count; } -static void bind_cdev(struct thermal_cooling_device *cdev) +static int __init thermal_register_governors(void) { - int i, ret; - const struct thermal_zone_params *tzp; - struct thermal_zone_device *pos = NULL; - - mutex_lock(&thermal_list_lock); + int result; - list_for_each_entry(pos, &thermal_tz_list, node) { - if (!pos->tzp && !pos->ops->bind) - continue; + result = thermal_gov_step_wise_register(); + if (result) + return result; - if (pos->ops->bind) { - ret = pos->ops->bind(pos, cdev); - if (ret) - print_bind_err_msg(pos, cdev, ret); - continue; - } + result = thermal_gov_fair_share_register(); + if (result) + return result; - tzp = pos->tzp; - if (!tzp || !tzp->tbp) - continue; + result = thermal_gov_bang_bang_register(); + if (result) + return result; - for (i = 0; i < tzp->num_tbps; i++) { - if (tzp->tbp[i].cdev || !tzp->tbp[i].match) - continue; - if (tzp->tbp[i].match(pos, cdev)) - continue; - tzp->tbp[i].cdev = cdev; - __bind(pos, tzp->tbp[i].trip_mask, cdev, - tzp->tbp[i].binding_limits, - tzp->tbp[i].weight); - } - } + result = thermal_gov_user_space_register(); + if (result) + return result; - mutex_unlock(&thermal_list_lock); + return thermal_gov_power_allocator_register(); } -static void bind_tz(struct thermal_zone_device *tz) +static void thermal_unregister_governors(void) { - int i, ret; - struct thermal_cooling_device *pos = NULL; - const struct thermal_zone_params *tzp = tz->tzp; - - if (!tzp && !tz->ops->bind) - return; - - mutex_lock(&thermal_list_lock); - - /* If there is ops->bind, try to use ops->bind */ - if (tz->ops->bind) { - list_for_each_entry(pos, &thermal_cdev_list, node) { - ret = tz->ops->bind(tz, pos); - if (ret) - print_bind_err_msg(tz, pos, ret); - } - goto exit; - } - - if (!tzp || !tzp->tbp) - goto exit; - - list_for_each_entry(pos, &thermal_cdev_list, node) { - for (i = 0; i < tzp->num_tbps; i++) { - if (tzp->tbp[i].cdev || !tzp->tbp[i].match) - continue; - if (tzp->tbp[i].match(tz, pos)) - continue; - tzp->tbp[i].cdev = pos; - __bind(tz, tzp->tbp[i].trip_mask, pos, - tzp->tbp[i].binding_limits, - tzp->tbp[i].weight); - } - } -exit: - mutex_unlock(&thermal_list_lock); + thermal_gov_step_wise_unregister(); + thermal_gov_fair_share_unregister(); + thermal_gov_bang_bang_unregister(); + thermal_gov_user_space_unregister(); + thermal_gov_power_allocator_unregister(); } +/* + * Zone update section: main control loop applied to each zone while monitoring + * + * in polling mode. The monitoring is done using a workqueue. + * Same update may be done on a zone by calling thermal_zone_device_update(). + * + * An update means: + * - Non-critical trips will invoke the governor responsible for that zone; + * - Hot trips will produce a notification to userspace; + * - Critical trip point will cause a system shutdown. + */ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, int delay) { @@ -420,14 +316,15 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz) } static void handle_non_critical_trips(struct thermal_zone_device *tz, - int trip, enum thermal_trip_type trip_type) + int trip, + enum thermal_trip_type trip_type) { tz->governor ? tz->governor->throttle(tz, trip) : def_governor->throttle(tz, trip); } static void handle_critical_trips(struct thermal_zone_device *tz, - int trip, enum thermal_trip_type trip_type) + int trip, enum thermal_trip_type trip_type) { int trip_temp; @@ -471,105 +368,6 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip) monitor_thermal_zone(tz); } -/** - * thermal_zone_get_temp() - returns the temperature of a thermal zone - * @tz: a valid pointer to a struct thermal_zone_device - * @temp: a valid pointer to where to store the resulting temperature. - * - * When a valid thermal zone reference is passed, it will fetch its - * temperature and fill @temp. - * - * Return: On success returns 0, an error code otherwise - */ -int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp) -{ - int ret = -EINVAL; - int count; - int crit_temp = INT_MAX; - enum thermal_trip_type type; - - if (!tz || IS_ERR(tz) || !tz->ops->get_temp) - goto exit; - - mutex_lock(&tz->lock); - - ret = tz->ops->get_temp(tz, temp); - - if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) { - for (count = 0; count < tz->trips; count++) { - ret = tz->ops->get_trip_type(tz, count, &type); - if (!ret && type == THERMAL_TRIP_CRITICAL) { - ret = tz->ops->get_trip_temp(tz, count, - &crit_temp); - break; - } - } - - /* - * Only allow emulating a temperature when the real temperature - * is below the critical temperature so that the emulation code - * cannot hide critical conditions. - */ - if (!ret && *temp < crit_temp) - *temp = tz->emul_temperature; - } - - mutex_unlock(&tz->lock); -exit: - return ret; -} -EXPORT_SYMBOL_GPL(thermal_zone_get_temp); - -void thermal_zone_set_trips(struct thermal_zone_device *tz) -{ - int low = -INT_MAX; - int high = INT_MAX; - int trip_temp, hysteresis; - int i, ret; - - mutex_lock(&tz->lock); - - if (!tz->ops->set_trips || !tz->ops->get_trip_hyst) - goto exit; - - for (i = 0; i < tz->trips; i++) { - int trip_low; - - tz->ops->get_trip_temp(tz, i, &trip_temp); - tz->ops->get_trip_hyst(tz, i, &hysteresis); - - trip_low = trip_temp - hysteresis; - - if (trip_low < tz->temperature && trip_low > low) - low = trip_low; - - if (trip_temp > tz->temperature && trip_temp < high) - high = trip_temp; - } - - /* No need to change trip points */ - if (tz->prev_low_trip == low && tz->prev_high_trip == high) - goto exit; - - tz->prev_low_trip = low; - tz->prev_high_trip = high; - - dev_dbg(&tz->device, - "new temperature boundaries: %d < x < %d\n", low, high); - - /* - * Set a temperature window. When this window is left the driver - * must inform the thermal core via thermal_zone_device_update. - */ - ret = tz->ops->set_trips(tz, low, high); - if (ret) - dev_err(&tz->device, "Failed to set trips: %d\n", ret); - -exit: - mutex_unlock(&tz->lock); -} -EXPORT_SYMBOL_GPL(thermal_zone_set_trips); - static void update_temperature(struct thermal_zone_device *tz) { int temp, ret; @@ -629,6 +427,24 @@ void thermal_zone_device_update(struct thermal_zone_device *tz, } EXPORT_SYMBOL_GPL(thermal_zone_device_update); +/** + * thermal_notify_framework - Sensor drivers use this API to notify framework + * @tz: thermal zone device + * @trip: indicates which trip point has been crossed + * + * This function handles the trip events from sensor drivers. It starts + * throttling the cooling devices according to the policy configured. + * For CRITICAL and HOT trip points, this notifies the respective drivers, + * and does actual throttling for other trip points i.e ACTIVE and PASSIVE. + * The throttling policy is based on the configured platform data; if no + * platform data is provided, this uses the step_wise throttling policy. + */ +void thermal_notify_framework(struct thermal_zone_device *tz, int trip) +{ + handle_thermal_trip(tz, trip); +} +EXPORT_SYMBOL_GPL(thermal_notify_framework); + static void thermal_zone_device_check(struct work_struct *work) { struct thermal_zone_device *tz = container_of(work, struct @@ -637,445 +453,12 @@ static void thermal_zone_device_check(struct work_struct *work) thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); } -/* sys I/F for thermal zone */ - -#define to_thermal_zone(_dev) \ - container_of(_dev, struct thermal_zone_device, device) - -static ssize_t -type_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - - return sprintf(buf, "%s\n", tz->type); -} - -static ssize_t -temp_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - int temperature, ret; - - ret = thermal_zone_get_temp(tz, &temperature); - - if (ret) - return ret; - - return sprintf(buf, "%d\n", temperature); -} - -static ssize_t -mode_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - enum thermal_device_mode mode; - int result; - - if (!tz->ops->get_mode) - return -EPERM; - - result = tz->ops->get_mode(tz, &mode); - if (result) - return result; - - return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled" - : "disabled"); -} - -static ssize_t -mode_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - int result; - - if (!tz->ops->set_mode) - return -EPERM; - - if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) - result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); - else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) - result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); - else - result = -EINVAL; - - if (result) - return result; - - return count; -} - -static ssize_t -trip_point_type_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - enum thermal_trip_type type; - int trip, result; - - if (!tz->ops->get_trip_type) - return -EPERM; - - if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip)) - return -EINVAL; - - result = tz->ops->get_trip_type(tz, trip, &type); - if (result) - return result; - - switch (type) { - case THERMAL_TRIP_CRITICAL: - return sprintf(buf, "critical\n"); - case THERMAL_TRIP_HOT: - return sprintf(buf, "hot\n"); - case THERMAL_TRIP_PASSIVE: - return sprintf(buf, "passive\n"); - case THERMAL_TRIP_ACTIVE: - return sprintf(buf, "active\n"); - default: - return sprintf(buf, "unknown\n"); - } -} - -static ssize_t -trip_point_temp_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - int trip, ret; - int temperature; - - if (!tz->ops->set_trip_temp) - return -EPERM; - - if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip)) - return -EINVAL; - - if (kstrtoint(buf, 10, &temperature)) - return -EINVAL; - - ret = tz->ops->set_trip_temp(tz, trip, temperature); - if (ret) - return ret; - - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); - - return count; -} - -static ssize_t -trip_point_temp_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - int trip, ret; - int temperature; - - if (!tz->ops->get_trip_temp) - return -EPERM; - - if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip)) - return -EINVAL; - - ret = tz->ops->get_trip_temp(tz, trip, &temperature); - - if (ret) - return ret; - - return sprintf(buf, "%d\n", temperature); -} - -static ssize_t -trip_point_hyst_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - int trip, ret; - int temperature; - - if (!tz->ops->set_trip_hyst) - return -EPERM; - - if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip)) - return -EINVAL; - - if (kstrtoint(buf, 10, &temperature)) - return -EINVAL; - - /* - * We are not doing any check on the 'temperature' value - * here. The driver implementing 'set_trip_hyst' has to - * take care of this. - */ - ret = tz->ops->set_trip_hyst(tz, trip, temperature); - - if (!ret) - thermal_zone_set_trips(tz); - - return ret ? ret : count; -} - -static ssize_t -trip_point_hyst_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - int trip, ret; - int temperature; - - if (!tz->ops->get_trip_hyst) - return -EPERM; - - if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip)) - return -EINVAL; - - ret = tz->ops->get_trip_hyst(tz, trip, &temperature); - - return ret ? ret : sprintf(buf, "%d\n", temperature); -} - -static ssize_t -passive_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - struct thermal_cooling_device *cdev = NULL; - int state; - - if (!sscanf(buf, "%d\n", &state)) - return -EINVAL; - - /* sanity check: values below 1000 millicelcius don't make sense - * and can cause the system to go into a thermal heart attack - */ - if (state && state < 1000) - return -EINVAL; - - if (state && !tz->forced_passive) { - mutex_lock(&thermal_list_lock); - list_for_each_entry(cdev, &thermal_cdev_list, node) { - if (!strncmp("Processor", cdev->type, - sizeof("Processor"))) - thermal_zone_bind_cooling_device(tz, - THERMAL_TRIPS_NONE, cdev, - THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT, - THERMAL_WEIGHT_DEFAULT); - } - mutex_unlock(&thermal_list_lock); - if (!tz->passive_delay) - tz->passive_delay = 1000; - } else if (!state && tz->forced_passive) { - mutex_lock(&thermal_list_lock); - list_for_each_entry(cdev, &thermal_cdev_list, node) { - if (!strncmp("Processor", cdev->type, - sizeof("Processor"))) - thermal_zone_unbind_cooling_device(tz, - THERMAL_TRIPS_NONE, - cdev); - } - mutex_unlock(&thermal_list_lock); - tz->passive_delay = 0; - } - - tz->forced_passive = state; - - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); - - return count; -} - -static ssize_t -passive_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - - return sprintf(buf, "%d\n", tz->forced_passive); -} - -static ssize_t -policy_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - int ret = -EINVAL; - struct thermal_zone_device *tz = to_thermal_zone(dev); - struct thermal_governor *gov; - char name[THERMAL_NAME_LENGTH]; - - snprintf(name, sizeof(name), "%s", buf); - - mutex_lock(&thermal_governor_lock); - mutex_lock(&tz->lock); - - gov = __find_governor(strim(name)); - if (!gov) - goto exit; - - ret = thermal_set_governor(tz, gov); - if (!ret) - ret = count; - -exit: - mutex_unlock(&tz->lock); - mutex_unlock(&thermal_governor_lock); - return ret; -} - -static ssize_t -policy_show(struct device *dev, struct device_attribute *devattr, char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - - return sprintf(buf, "%s\n", tz->governor->name); -} - -static ssize_t -available_policies_show(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct thermal_governor *pos; - ssize_t count = 0; - ssize_t size = PAGE_SIZE; - - mutex_lock(&thermal_governor_lock); - - list_for_each_entry(pos, &thermal_governor_list, governor_list) { - size = PAGE_SIZE - count; - count += scnprintf(buf + count, size, "%s ", pos->name); - } - count += scnprintf(buf + count, size, "\n"); - - mutex_unlock(&thermal_governor_lock); - - return count; -} - -static ssize_t -emul_temp_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - int ret = 0; - int temperature; - - if (kstrtoint(buf, 10, &temperature)) - return -EINVAL; - - if (!tz->ops->set_emul_temp) { - mutex_lock(&tz->lock); - tz->emul_temperature = temperature; - mutex_unlock(&tz->lock); - } else { - ret = tz->ops->set_emul_temp(tz, temperature); - } - - if (!ret) - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); - - return ret ? ret : count; -} -static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store); - -static ssize_t -sustainable_power_show(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - - if (tz->tzp) - return sprintf(buf, "%u\n", tz->tzp->sustainable_power); - else - return -EIO; -} - -static ssize_t -sustainable_power_store(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct thermal_zone_device *tz = to_thermal_zone(dev); - u32 sustainable_power; - - if (!tz->tzp) - return -EIO; - - if (kstrtou32(buf, 10, &sustainable_power)) - return -EINVAL; - - tz->tzp->sustainable_power = sustainable_power; - - return count; -} -static DEVICE_ATTR(sustainable_power, S_IWUSR | S_IRUGO, sustainable_power_show, - sustainable_power_store); - -#define create_s32_tzp_attr(name) \ - static ssize_t \ - name##_show(struct device *dev, struct device_attribute *devattr, \ - char *buf) \ - { \ - struct thermal_zone_device *tz = to_thermal_zone(dev); \ - \ - if (tz->tzp) \ - return sprintf(buf, "%d\n", tz->tzp->name); \ - else \ - return -EIO; \ - } \ - \ - static ssize_t \ - name##_store(struct device *dev, struct device_attribute *devattr, \ - const char *buf, size_t count) \ - { \ - struct thermal_zone_device *tz = to_thermal_zone(dev); \ - s32 value; \ - \ - if (!tz->tzp) \ - return -EIO; \ - \ - if (kstrtos32(buf, 10, &value)) \ - return -EINVAL; \ - \ - tz->tzp->name = value; \ - \ - return count; \ - } \ - static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, name##_show, name##_store) - -create_s32_tzp_attr(k_po); -create_s32_tzp_attr(k_pu); -create_s32_tzp_attr(k_i); -create_s32_tzp_attr(k_d); -create_s32_tzp_attr(integral_cutoff); -create_s32_tzp_attr(slope); -create_s32_tzp_attr(offset); -#undef create_s32_tzp_attr - -static struct device_attribute *dev_tzp_attrs[] = { - &dev_attr_sustainable_power, - &dev_attr_k_po, - &dev_attr_k_pu, - &dev_attr_k_i, - &dev_attr_k_d, - &dev_attr_integral_cutoff, - &dev_attr_slope, - &dev_attr_offset, -}; - -static int create_tzp_attrs(struct device *dev) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(dev_tzp_attrs); i++) { - int ret; - struct device_attribute *dev_attr = dev_tzp_attrs[i]; - - ret = device_create_file(dev, dev_attr); - if (ret) - return ret; - } - - return 0; -} +/* + * Power actor section: interface to power actors to estimate power + * + * Set of functions used to interact to cooling devices that know + * how to estimate their devices power consumption. + */ /** * power_actor_get_max_power() - get the maximum power that a cdev can consume @@ -1127,12 +510,13 @@ int power_actor_get_min_power(struct thermal_cooling_device *cdev, } /** - * power_actor_set_power() - limit the maximum power that a cooling device can consume + * power_actor_set_power() - limit the maximum power a cooling device consumes * @cdev: pointer to &thermal_cooling_device * @instance: thermal instance to update * @power: the power in milliwatts * - * Set the cooling device to consume at most @power milliwatts. + * Set the cooling device to consume at most @power milliwatts. The limit is + * expected to be a cap at the maximum power consumption. * * Return: 0 on success, -EINVAL if the cooling device does not * implement the power actor API or -E* for other failures. @@ -1159,143 +543,75 @@ int power_actor_set_power(struct thermal_cooling_device *cdev, return 0; } -static DEVICE_ATTR(type, 0444, type_show, NULL); -static DEVICE_ATTR(temp, 0444, temp_show, NULL); -static DEVICE_ATTR(mode, 0644, mode_show, mode_store); -static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); -static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store); -static DEVICE_ATTR(available_policies, S_IRUGO, available_policies_show, NULL); - -/* sys I/F for cooling device */ -#define to_cooling_device(_dev) \ - container_of(_dev, struct thermal_cooling_device, device) - -static ssize_t -thermal_cooling_device_type_show(struct device *dev, - struct device_attribute *attr, char *buf) +void thermal_zone_device_rebind_exception(struct thermal_zone_device *tz, + const char *cdev_type, size_t size) { - struct thermal_cooling_device *cdev = to_cooling_device(dev); + struct thermal_cooling_device *cdev = NULL; + + mutex_lock(&thermal_list_lock); + list_for_each_entry(cdev, &thermal_cdev_list, node) { + /* skip non matching cdevs */ + if (strncmp(cdev_type, cdev->type, size)) + continue; - return sprintf(buf, "%s\n", cdev->type); + /* re binding the exception matching the type pattern */ + thermal_zone_bind_cooling_device(tz, THERMAL_TRIPS_NONE, cdev, + THERMAL_NO_LIMIT, + THERMAL_NO_LIMIT, + THERMAL_WEIGHT_DEFAULT); + } + mutex_unlock(&thermal_list_lock); } -static ssize_t -thermal_cooling_device_max_state_show(struct device *dev, - struct device_attribute *attr, char *buf) +void thermal_zone_device_unbind_exception(struct thermal_zone_device *tz, + const char *cdev_type, size_t size) { - struct thermal_cooling_device *cdev = to_cooling_device(dev); - unsigned long state; - int ret; + struct thermal_cooling_device *cdev = NULL; - ret = cdev->ops->get_max_state(cdev, &state); - if (ret) - return ret; - return sprintf(buf, "%ld\n", state); + mutex_lock(&thermal_list_lock); + list_for_each_entry(cdev, &thermal_cdev_list, node) { + /* skip non matching cdevs */ + if (strncmp(cdev_type, cdev->type, size)) + continue; + /* unbinding the exception matching the type pattern */ + thermal_zone_unbind_cooling_device(tz, THERMAL_TRIPS_NONE, + cdev); + } + mutex_unlock(&thermal_list_lock); } -static ssize_t -thermal_cooling_device_cur_state_show(struct device *dev, - struct device_attribute *attr, char *buf) +/* + * Device management section: cooling devices, zones devices, and binding + * + * Set of functions provided by the thermal core for: + * - cooling devices lifecycle: registration, unregistration, + * binding, and unbinding. + * - thermal zone devices lifecycle: registration, unregistration, + * binding, and unbinding. + */ +static int get_idr(struct idr *idr, struct mutex *lock, int *id) { - struct thermal_cooling_device *cdev = to_cooling_device(dev); - unsigned long state; int ret; - ret = cdev->ops->get_cur_state(cdev, &state); - if (ret) + if (lock) + mutex_lock(lock); + ret = idr_alloc(idr, NULL, 0, 0, GFP_KERNEL); + if (lock) + mutex_unlock(lock); + if (unlikely(ret < 0)) return ret; - return sprintf(buf, "%ld\n", state); -} - -static ssize_t -thermal_cooling_device_cur_state_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct thermal_cooling_device *cdev = to_cooling_device(dev); - unsigned long state; - int result; - - if (!sscanf(buf, "%ld\n", &state)) - return -EINVAL; - - if ((long)state < 0) - return -EINVAL; - - result = cdev->ops->set_cur_state(cdev, state); - if (result) - return result; - return count; -} - -static struct device_attribute dev_attr_cdev_type = -__ATTR(type, 0444, thermal_cooling_device_type_show, NULL); -static DEVICE_ATTR(max_state, 0444, - thermal_cooling_device_max_state_show, NULL); -static DEVICE_ATTR(cur_state, 0644, - thermal_cooling_device_cur_state_show, - thermal_cooling_device_cur_state_store); - -static ssize_t -thermal_cooling_device_trip_point_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct thermal_instance *instance; - - instance = - container_of(attr, struct thermal_instance, attr); - - if (instance->trip == THERMAL_TRIPS_NONE) - return sprintf(buf, "-1\n"); - else - return sprintf(buf, "%d\n", instance->trip); -} - -static struct attribute *cooling_device_attrs[] = { - &dev_attr_cdev_type.attr, - &dev_attr_max_state.attr, - &dev_attr_cur_state.attr, - NULL, -}; - -static const struct attribute_group cooling_device_attr_group = { - .attrs = cooling_device_attrs, -}; - -static const struct attribute_group *cooling_device_attr_groups[] = { - &cooling_device_attr_group, - NULL, -}; - -static ssize_t -thermal_cooling_device_weight_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct thermal_instance *instance; - - instance = container_of(attr, struct thermal_instance, weight_attr); - - return sprintf(buf, "%d\n", instance->weight); + *id = ret; + return 0; } -static ssize_t -thermal_cooling_device_weight_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static void release_idr(struct idr *idr, struct mutex *lock, int id) { - struct thermal_instance *instance; - int ret, weight; - - ret = kstrtoint(buf, 0, &weight); - if (ret) - return ret; - - instance = container_of(attr, struct thermal_instance, weight_attr); - instance->weight = weight; - - return count; + if (lock) + mutex_lock(lock); + idr_remove(idr, id); + if (lock) + mutex_unlock(lock); } -/* Device management */ /** * thermal_zone_bind_cooling_device() - bind a cooling device to a thermal zone @@ -1358,8 +674,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, if (lower > upper || upper > max_state) return -EINVAL; - dev = - kzalloc(sizeof(struct thermal_instance), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; dev->tz = tz; @@ -1402,10 +717,10 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, mutex_lock(&tz->lock); mutex_lock(&cdev->lock); list_for_each_entry(pos, &tz->thermal_instances, tz_node) - if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { - result = -EEXIST; - break; - } + if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { + result = -EEXIST; + break; + } if (!result) { list_add_tail(&dev->tz_node, &tz->thermal_instances); list_add_tail(&dev->cdev_node, &cdev->thermal_instances); @@ -1485,8 +800,8 @@ static void thermal_release(struct device *dev) sizeof("thermal_zone") - 1)) { tz = to_thermal_zone(dev); kfree(tz); - } else if(!strncmp(dev_name(dev), "cooling_device", - sizeof("cooling_device") - 1)){ + } else if (!strncmp(dev_name(dev), "cooling_device", + sizeof("cooling_device") - 1)) { cdev = to_cooling_device(dev); kfree(cdev); } @@ -1497,6 +812,78 @@ static struct class thermal_class = { .dev_release = thermal_release, }; +static inline +void print_bind_err_msg(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev, int ret) +{ + dev_err(&tz->device, "binding zone %s with cdev %s failed:%d\n", + tz->type, cdev->type, ret); +} + +static void __bind(struct thermal_zone_device *tz, int mask, + struct thermal_cooling_device *cdev, + unsigned long *limits, + unsigned int weight) +{ + int i, ret; + + for (i = 0; i < tz->trips; i++) { + if (mask & (1 << i)) { + unsigned long upper, lower; + + upper = THERMAL_NO_LIMIT; + lower = THERMAL_NO_LIMIT; + if (limits) { + lower = limits[i * 2]; + upper = limits[i * 2 + 1]; + } + ret = thermal_zone_bind_cooling_device(tz, i, cdev, + upper, lower, + weight); + if (ret) + print_bind_err_msg(tz, cdev, ret); + } + } +} + +static void bind_cdev(struct thermal_cooling_device *cdev) +{ + int i, ret; + const struct thermal_zone_params *tzp; + struct thermal_zone_device *pos = NULL; + + mutex_lock(&thermal_list_lock); + + list_for_each_entry(pos, &thermal_tz_list, node) { + if (!pos->tzp && !pos->ops->bind) + continue; + + if (pos->ops->bind) { + ret = pos->ops->bind(pos, cdev); + if (ret) + print_bind_err_msg(pos, cdev, ret); + continue; + } + + tzp = pos->tzp; + if (!tzp || !tzp->tbp) + continue; + + for (i = 0; i < tzp->num_tbps; i++) { + if (tzp->tbp[i].cdev || !tzp->tbp[i].match) + continue; + if (tzp->tbp[i].match(pos, cdev)) + continue; + tzp->tbp[i].cdev = cdev; + __bind(pos, tzp->tbp[i].trip_mask, cdev, + tzp->tbp[i].binding_limits, + tzp->tbp[i].weight); + } + } + + mutex_unlock(&thermal_list_lock); +} + /** * __thermal_cooling_device_register() - register a new thermal cooling device * @np: a pointer to a device tree node. @@ -1529,7 +916,7 @@ __thermal_cooling_device_register(struct device_node *np, !ops->set_cur_state) return ERR_PTR(-EINVAL); - cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL); + cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); if (!cdev) return ERR_PTR(-ENOMEM); @@ -1546,7 +933,7 @@ __thermal_cooling_device_register(struct device_node *np, cdev->ops = ops; cdev->updated = false; cdev->device.class = &thermal_class; - cdev->device.groups = cooling_device_attr_groups; + thermal_cooling_device_setup_sysfs(cdev); cdev->devdata = devdata; dev_set_name(&cdev->device, "cooling_device%d", cdev->id); result = device_register(&cdev->device); @@ -1619,12 +1006,22 @@ thermal_of_cooling_device_register(struct device_node *np, } EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register); +static void __unbind(struct thermal_zone_device *tz, int mask, + struct thermal_cooling_device *cdev) +{ + int i; + + for (i = 0; i < tz->trips; i++) + if (mask & (1 << i)) + thermal_zone_unbind_cooling_device(tz, i, cdev); +} + /** - * thermal_cooling_device_unregister - removes the registered thermal cooling device + * thermal_cooling_device_unregister - removes a thermal cooling device * @cdev: the thermal cooling device to remove. * - * thermal_cooling_device_unregister() must be called when the device is no - * longer needed. + * thermal_cooling_device_unregister() must be called when a registered + * thermal cooling device is no longer needed. */ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) { @@ -1638,8 +1035,8 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) mutex_lock(&thermal_list_lock); list_for_each_entry(pos, &thermal_cdev_list, node) - if (pos == cdev) - break; + if (pos == cdev) + break; if (pos != cdev) { /* thermal cooling device not found */ mutex_unlock(&thermal_list_lock); @@ -1668,171 +1065,49 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) mutex_unlock(&thermal_list_lock); - if (cdev->type[0]) - device_remove_file(&cdev->device, &dev_attr_cdev_type); - device_remove_file(&cdev->device, &dev_attr_max_state); - device_remove_file(&cdev->device, &dev_attr_cur_state); - release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id); device_unregister(&cdev->device); - return; } EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister); -void thermal_cdev_update(struct thermal_cooling_device *cdev) +static void bind_tz(struct thermal_zone_device *tz) { - struct thermal_instance *instance; - unsigned long target = 0; + int i, ret; + struct thermal_cooling_device *pos = NULL; + const struct thermal_zone_params *tzp = tz->tzp; - mutex_lock(&cdev->lock); - /* cooling device is updated*/ - if (cdev->updated) { - mutex_unlock(&cdev->lock); + if (!tzp && !tz->ops->bind) return; - } - - /* Make sure cdev enters the deepest cooling state */ - list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) { - dev_dbg(&cdev->device, "zone%d->target=%lu\n", - instance->tz->id, instance->target); - if (instance->target == THERMAL_NO_TARGET) - continue; - if (instance->target > target) - target = instance->target; - } - cdev->ops->set_cur_state(cdev, target); - cdev->updated = true; - mutex_unlock(&cdev->lock); - trace_cdev_update(cdev, target); - dev_dbg(&cdev->device, "set to state %lu\n", target); -} -EXPORT_SYMBOL(thermal_cdev_update); -/** - * thermal_notify_framework - Sensor drivers use this API to notify framework - * @tz: thermal zone device - * @trip: indicates which trip point has been crossed - * - * This function handles the trip events from sensor drivers. It starts - * throttling the cooling devices according to the policy configured. - * For CRITICAL and HOT trip points, this notifies the respective drivers, - * and does actual throttling for other trip points i.e ACTIVE and PASSIVE. - * The throttling policy is based on the configured platform data; if no - * platform data is provided, this uses the step_wise throttling policy. - */ -void thermal_notify_framework(struct thermal_zone_device *tz, int trip) -{ - handle_thermal_trip(tz, trip); -} -EXPORT_SYMBOL_GPL(thermal_notify_framework); - -/** - * create_trip_attrs() - create attributes for trip points - * @tz: the thermal zone device - * @mask: Writeable trip point bitmap. - * - * helper function to instantiate sysfs entries for every trip - * point and its properties of a struct thermal_zone_device. - * - * Return: 0 on success, the proper error value otherwise. - */ -static int create_trip_attrs(struct thermal_zone_device *tz, int mask) -{ - int indx; - int size = sizeof(struct thermal_attr) * tz->trips; - - tz->trip_type_attrs = kzalloc(size, GFP_KERNEL); - if (!tz->trip_type_attrs) - return -ENOMEM; - - tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL); - if (!tz->trip_temp_attrs) { - kfree(tz->trip_type_attrs); - return -ENOMEM; - } + mutex_lock(&thermal_list_lock); - if (tz->ops->get_trip_hyst) { - tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL); - if (!tz->trip_hyst_attrs) { - kfree(tz->trip_type_attrs); - kfree(tz->trip_temp_attrs); - return -ENOMEM; + /* If there is ops->bind, try to use ops->bind */ + if (tz->ops->bind) { + list_for_each_entry(pos, &thermal_cdev_list, node) { + ret = tz->ops->bind(tz, pos); + if (ret) + print_bind_err_msg(tz, pos, ret); } + goto exit; } + if (!tzp || !tzp->tbp) + goto exit; - for (indx = 0; indx < tz->trips; indx++) { - /* create trip type attribute */ - snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH, - "trip_point_%d_type", indx); - - sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr); - tz->trip_type_attrs[indx].attr.attr.name = - tz->trip_type_attrs[indx].name; - tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO; - tz->trip_type_attrs[indx].attr.show = trip_point_type_show; - - device_create_file(&tz->device, - &tz->trip_type_attrs[indx].attr); - - /* create trip temp attribute */ - snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH, - "trip_point_%d_temp", indx); - - sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr); - tz->trip_temp_attrs[indx].attr.attr.name = - tz->trip_temp_attrs[indx].name; - tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO; - tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show; - if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS) && - mask & (1 << indx)) { - tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR; - tz->trip_temp_attrs[indx].attr.store = - trip_point_temp_store; - } - - device_create_file(&tz->device, - &tz->trip_temp_attrs[indx].attr); - - /* create Optional trip hyst attribute */ - if (!tz->ops->get_trip_hyst) - continue; - snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH, - "trip_point_%d_hyst", indx); - - sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr); - tz->trip_hyst_attrs[indx].attr.attr.name = - tz->trip_hyst_attrs[indx].name; - tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO; - tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show; - if (tz->ops->set_trip_hyst) { - tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR; - tz->trip_hyst_attrs[indx].attr.store = - trip_point_hyst_store; + list_for_each_entry(pos, &thermal_cdev_list, node) { + for (i = 0; i < tzp->num_tbps; i++) { + if (tzp->tbp[i].cdev || !tzp->tbp[i].match) + continue; + if (tzp->tbp[i].match(tz, pos)) + continue; + tzp->tbp[i].cdev = pos; + __bind(tz, tzp->tbp[i].trip_mask, pos, + tzp->tbp[i].binding_limits, + tzp->tbp[i].weight); } - - device_create_file(&tz->device, - &tz->trip_hyst_attrs[indx].attr); - } - return 0; -} - -static void remove_trip_attrs(struct thermal_zone_device *tz) -{ - int indx; - - for (indx = 0; indx < tz->trips; indx++) { - device_remove_file(&tz->device, - &tz->trip_type_attrs[indx].attr); - device_remove_file(&tz->device, - &tz->trip_temp_attrs[indx].attr); - if (tz->ops->get_trip_hyst) - device_remove_file(&tz->device, - &tz->trip_hyst_attrs[indx].attr); } - kfree(tz->trip_type_attrs); - kfree(tz->trip_temp_attrs); - kfree(tz->trip_hyst_attrs); +exit: + mutex_unlock(&thermal_list_lock); } /** @@ -1859,20 +1134,22 @@ static void remove_trip_attrs(struct thermal_zone_device *tz) * in case of error, an ERR_PTR. Caller must check return value with * IS_ERR*() helpers. */ -struct thermal_zone_device *thermal_zone_device_register(const char *type, - int trips, int mask, void *devdata, - struct thermal_zone_device_ops *ops, - struct thermal_zone_params *tzp, - int passive_delay, int polling_delay) +struct thermal_zone_device * +thermal_zone_device_register(const char *type, int trips, int mask, + void *devdata, struct thermal_zone_device_ops *ops, + struct thermal_zone_params *tzp, int passive_delay, + int polling_delay) { struct thermal_zone_device *tz; enum thermal_trip_type trip_type; int trip_temp; int result; int count; - int passive = 0; struct thermal_governor *governor; + if (!type || strlen(type) == 0) + return ERR_PTR(-EINVAL); + if (type && strlen(type) >= THERMAL_NAME_LENGTH) return ERR_PTR(-EINVAL); @@ -1885,7 +1162,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp)) return ERR_PTR(-EINVAL); - tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL); + tz = kzalloc(sizeof(*tz), GFP_KERNEL); if (!tz) return ERR_PTR(-ENOMEM); @@ -1898,7 +1175,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, return ERR_PTR(result); } - strlcpy(tz->type, type ? : "", sizeof(tz->type)); + strlcpy(tz->type, type, sizeof(tz->type)); tz->ops = ops; tz->tzp = tzp; tz->device.class = &thermal_class; @@ -1906,6 +1183,13 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, tz->trips = trips; tz->passive_delay = passive_delay; tz->polling_delay = polling_delay; + + /* sys I/F */ + /* Add nodes that are always present via .groups */ + result = thermal_zone_create_device_groups(tz, mask); + if (result) + goto unregister; + /* A new thermal zone needs to be updated anyway. */ atomic_set(&tz->need_update, 1); @@ -1917,32 +1201,9 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, return ERR_PTR(result); } - /* sys I/F */ - if (type) { - result = device_create_file(&tz->device, &dev_attr_type); - if (result) - goto unregister; - } - - result = device_create_file(&tz->device, &dev_attr_temp); - if (result) - goto unregister; - - if (ops->get_mode) { - result = device_create_file(&tz->device, &dev_attr_mode); - if (result) - goto unregister; - } - - result = create_trip_attrs(tz, mask); - if (result) - goto unregister; - for (count = 0; count < trips; count++) { if (tz->ops->get_trip_type(tz, count, &trip_type)) set_bit(count, &tz->trips_disabled); - if (trip_type == THERMAL_TRIP_PASSIVE) - passive = 1; if (tz->ops->get_trip_temp(tz, count, &trip_temp)) set_bit(count, &tz->trips_disabled); /* Check for bogus trip points */ @@ -1950,33 +1211,6 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, set_bit(count, &tz->trips_disabled); } - if (!passive) { - result = device_create_file(&tz->device, &dev_attr_passive); - if (result) - goto unregister; - } - - if (IS_ENABLED(CONFIG_THERMAL_EMULATION)) { - result = device_create_file(&tz->device, &dev_attr_emul_temp); - if (result) - goto unregister; - } - - /* Create policy attribute */ - result = device_create_file(&tz->device, &dev_attr_policy); - if (result) - goto unregister; - - /* Add thermal zone params */ - result = create_tzp_attrs(&tz->device); - if (result) - goto unregister; - - /* Create available_policies attribute */ - result = device_create_file(&tz->device, &dev_attr_available_policies); - if (result) - goto unregister; - /* Update 'this' zone's governor information */ mutex_lock(&thermal_governor_lock); @@ -2006,7 +1240,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, /* Bind cooling devices for this zone */ bind_tz(tz); - INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check); + INIT_DELAYED_WORK(&tz->poll_queue, thermal_zone_device_check); thermal_zone_device_reset(tz); /* Update the new thermal zone and mark it as already updated. */ @@ -2040,8 +1274,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) mutex_lock(&thermal_list_lock); list_for_each_entry(pos, &thermal_tz_list, node) - if (pos == tz) - break; + if (pos == tz) + break; if (pos != tz) { /* thermal zone device not found */ mutex_unlock(&thermal_list_lock); @@ -2071,14 +1305,10 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) thermal_zone_device_set_polling(tz, 0); - if (tz->type[0]) - device_remove_file(&tz->device, &dev_attr_type); - device_remove_file(&tz->device, &dev_attr_temp); - if (tz->ops->get_mode) - device_remove_file(&tz->device, &dev_attr_mode); - device_remove_file(&tz->device, &dev_attr_policy); - device_remove_file(&tz->device, &dev_attr_available_policies); - remove_trip_attrs(tz); + kfree(tz->trip_type_attrs); + kfree(tz->trip_temp_attrs); + kfree(tz->trip_hyst_attrs); + kfree(tz->trips_attribute_group.attrs); thermal_set_governor(tz, NULL); thermal_remove_hwmon_sysfs(tz); @@ -2086,7 +1316,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) idr_destroy(&tz->idr); mutex_destroy(&tz->lock); device_unregister(&tz->device); - return; + kfree(tz->device.groups); } EXPORT_SYMBOL_GPL(thermal_zone_device_unregister); @@ -2128,36 +1358,6 @@ exit: } EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name); -/** - * thermal_zone_get_slope - return the slope attribute of the thermal zone - * @tz: thermal zone device with the slope attribute - * - * Return: If the thermal zone device has a slope attribute, return it, else - * return 1. - */ -int thermal_zone_get_slope(struct thermal_zone_device *tz) -{ - if (tz && tz->tzp) - return tz->tzp->slope; - return 1; -} -EXPORT_SYMBOL_GPL(thermal_zone_get_slope); - -/** - * thermal_zone_get_offset - return the offset attribute of the thermal zone - * @tz: thermal zone device with the offset attribute - * - * Return: If the thermal zone device has a offset attribute, return it, else - * return 0. - */ -int thermal_zone_get_offset(struct thermal_zone_device *tz) -{ - if (tz && tz->tzp) - return tz->tzp->offset; - return 0; -} -EXPORT_SYMBOL_GPL(thermal_zone_get_offset); - #ifdef CONFIG_NET static const struct genl_multicast_group thermal_event_mcgrps[] = { { .name = THERMAL_GENL_MCAST_GROUP_NAME, }, @@ -2173,7 +1373,7 @@ static struct genl_family thermal_event_genl_family __ro_after_init = { }; int thermal_generate_netlink_event(struct thermal_zone_device *tz, - enum events event) + enum events event) { struct sk_buff *skb; struct nlattr *attr; @@ -2249,40 +1449,8 @@ static inline int genetlink_init(void) { return 0; } static inline void genetlink_exit(void) {} #endif /* !CONFIG_NET */ -static int __init thermal_register_governors(void) -{ - int result; - - result = thermal_gov_step_wise_register(); - if (result) - return result; - - result = thermal_gov_fair_share_register(); - if (result) - return result; - - result = thermal_gov_bang_bang_register(); - if (result) - return result; - - result = thermal_gov_user_space_register(); - if (result) - return result; - - return thermal_gov_power_allocator_register(); -} - -static void thermal_unregister_governors(void) -{ - thermal_gov_step_wise_unregister(); - thermal_gov_fair_share_unregister(); - thermal_gov_bang_bang_unregister(); - thermal_gov_user_space_unregister(); - thermal_gov_power_allocator_unregister(); -} - static int thermal_pm_notify(struct notifier_block *nb, - unsigned long mode, void *_unused) + unsigned long mode, void *_unused) { struct thermal_zone_device *tz; diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 749d41abfbab..2412b3759e16 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -54,8 +54,34 @@ struct thermal_instance { unsigned int weight; /* The weight of the cooling device */ }; +#define to_thermal_zone(_dev) \ + container_of(_dev, struct thermal_zone_device, device) + +#define to_cooling_device(_dev) \ + container_of(_dev, struct thermal_cooling_device, device) + int thermal_register_governor(struct thermal_governor *); void thermal_unregister_governor(struct thermal_governor *); +void thermal_zone_device_rebind_exception(struct thermal_zone_device *, + const char *, size_t); +void thermal_zone_device_unbind_exception(struct thermal_zone_device *, + const char *, size_t); +int thermal_zone_device_set_policy(struct thermal_zone_device *, char *); +int thermal_build_list_of_policies(char *buf); + +/* sysfs I/F */ +int thermal_zone_create_device_groups(struct thermal_zone_device *, int); +void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *); +/* used only at binding time */ +ssize_t +thermal_cooling_device_trip_point_show(struct device *, + struct device_attribute *, char *); +ssize_t thermal_cooling_device_weight_show(struct device *, + struct device_attribute *, char *); + +ssize_t thermal_cooling_device_weight_store(struct device *, + struct device_attribute *, + const char *, size_t); #ifdef CONFIG_THERMAL_GOV_STEP_WISE int thermal_gov_step_wise_register(void); diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c new file mode 100644 index 000000000000..8cdf75adcce1 --- /dev/null +++ b/drivers/thermal/thermal_helpers.c @@ -0,0 +1,226 @@ +/* + * thermal_helpers.c - helper functions to handle thermal devices + * + * Copyright (C) 2016 Eduardo Valentin <edubezval@gmail.com> + * + * Highly based on original thermal_core.c + * Copyright (C) 2008 Intel Corp + * Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com> + * Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/sysfs.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/string.h> + +#include <trace/events/thermal.h> + +#include "thermal_core.h" + +int get_tz_trend(struct thermal_zone_device *tz, int trip) +{ + enum thermal_trend trend; + + if (tz->emul_temperature || !tz->ops->get_trend || + tz->ops->get_trend(tz, trip, &trend)) { + if (tz->temperature > tz->last_temperature) + trend = THERMAL_TREND_RAISING; + else if (tz->temperature < tz->last_temperature) + trend = THERMAL_TREND_DROPPING; + else + trend = THERMAL_TREND_STABLE; + } + + return trend; +} +EXPORT_SYMBOL(get_tz_trend); + +struct thermal_instance * +get_thermal_instance(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev, int trip) +{ + struct thermal_instance *pos = NULL; + struct thermal_instance *target_instance = NULL; + + mutex_lock(&tz->lock); + mutex_lock(&cdev->lock); + + list_for_each_entry(pos, &tz->thermal_instances, tz_node) { + if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) { + target_instance = pos; + break; + } + } + + mutex_unlock(&cdev->lock); + mutex_unlock(&tz->lock); + + return target_instance; +} +EXPORT_SYMBOL(get_thermal_instance); + +/** + * thermal_zone_get_temp() - returns the temperature of a thermal zone + * @tz: a valid pointer to a struct thermal_zone_device + * @temp: a valid pointer to where to store the resulting temperature. + * + * When a valid thermal zone reference is passed, it will fetch its + * temperature and fill @temp. + * + * Return: On success returns 0, an error code otherwise + */ +int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp) +{ + int ret = -EINVAL; + int count; + int crit_temp = INT_MAX; + enum thermal_trip_type type; + + if (!tz || IS_ERR(tz) || !tz->ops->get_temp) + goto exit; + + mutex_lock(&tz->lock); + + ret = tz->ops->get_temp(tz, temp); + + if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) { + for (count = 0; count < tz->trips; count++) { + ret = tz->ops->get_trip_type(tz, count, &type); + if (!ret && type == THERMAL_TRIP_CRITICAL) { + ret = tz->ops->get_trip_temp(tz, count, + &crit_temp); + break; + } + } + + /* + * Only allow emulating a temperature when the real temperature + * is below the critical temperature so that the emulation code + * cannot hide critical conditions. + */ + if (!ret && *temp < crit_temp) + *temp = tz->emul_temperature; + } + + mutex_unlock(&tz->lock); +exit: + return ret; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_temp); + +void thermal_zone_set_trips(struct thermal_zone_device *tz) +{ + int low = -INT_MAX; + int high = INT_MAX; + int trip_temp, hysteresis; + int i, ret; + + mutex_lock(&tz->lock); + + if (!tz->ops->set_trips || !tz->ops->get_trip_hyst) + goto exit; + + for (i = 0; i < tz->trips; i++) { + int trip_low; + + tz->ops->get_trip_temp(tz, i, &trip_temp); + tz->ops->get_trip_hyst(tz, i, &hysteresis); + + trip_low = trip_temp - hysteresis; + + if (trip_low < tz->temperature && trip_low > low) + low = trip_low; + + if (trip_temp > tz->temperature && trip_temp < high) + high = trip_temp; + } + + /* No need to change trip points */ + if (tz->prev_low_trip == low && tz->prev_high_trip == high) + goto exit; + + tz->prev_low_trip = low; + tz->prev_high_trip = high; + + dev_dbg(&tz->device, + "new temperature boundaries: %d < x < %d\n", low, high); + + /* + * Set a temperature window. When this window is left the driver + * must inform the thermal core via thermal_zone_device_update. + */ + ret = tz->ops->set_trips(tz, low, high); + if (ret) + dev_err(&tz->device, "Failed to set trips: %d\n", ret); + +exit: + mutex_unlock(&tz->lock); +} +EXPORT_SYMBOL_GPL(thermal_zone_set_trips); + +void thermal_cdev_update(struct thermal_cooling_device *cdev) +{ + struct thermal_instance *instance; + unsigned long target = 0; + + mutex_lock(&cdev->lock); + /* cooling device is updated*/ + if (cdev->updated) { + mutex_unlock(&cdev->lock); + return; + } + + /* Make sure cdev enters the deepest cooling state */ + list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) { + dev_dbg(&cdev->device, "zone%d->target=%lu\n", + instance->tz->id, instance->target); + if (instance->target == THERMAL_NO_TARGET) + continue; + if (instance->target > target) + target = instance->target; + } + cdev->ops->set_cur_state(cdev, target); + cdev->updated = true; + mutex_unlock(&cdev->lock); + trace_cdev_update(cdev, target); + dev_dbg(&cdev->device, "set to state %lu\n", target); +} +EXPORT_SYMBOL(thermal_cdev_update); + +/** + * thermal_zone_get_slope - return the slope attribute of the thermal zone + * @tz: thermal zone device with the slope attribute + * + * Return: If the thermal zone device has a slope attribute, return it, else + * return 1. + */ +int thermal_zone_get_slope(struct thermal_zone_device *tz) +{ + if (tz && tz->tzp) + return tz->tzp->slope; + return 1; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_slope); + +/** + * thermal_zone_get_offset - return the offset attribute of the thermal zone + * @tz: thermal zone device with the offset attribute + * + * Return: If the thermal zone device has a offset attribute, return it, else + * return 0. + */ +int thermal_zone_get_offset(struct thermal_zone_device *tz) +{ + if (tz && tz->tzp) + return tz->tzp->offset; + return 0; +} +EXPORT_SYMBOL_GPL(thermal_zone_get_offset); diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c index c41c7742903a..541af5946203 100644 --- a/drivers/thermal/thermal_hwmon.c +++ b/drivers/thermal/thermal_hwmon.c @@ -64,7 +64,7 @@ name_show(struct device *dev, struct device_attribute *attr, char *buf) struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev); return sprintf(buf, "%s\n", hwmon->type); } -static DEVICE_ATTR(name, 0444, name_show, NULL); +static DEVICE_ATTR_RO(name); static ssize_t temp_input_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -98,7 +98,7 @@ temp_crit_show(struct device *dev, struct device_attribute *attr, char *buf) int temperature; int ret; - ret = tz->ops->get_trip_temp(tz, 0, &temperature); + ret = tz->ops->get_crit_temp(tz, &temperature); if (ret) return ret; diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c new file mode 100644 index 000000000000..a694de907a26 --- /dev/null +++ b/drivers/thermal/thermal_sysfs.c @@ -0,0 +1,771 @@ +/* + * thermal.c - sysfs interface of thermal devices + * + * Copyright (C) 2016 Eduardo Valentin <edubezval@gmail.com> + * + * Highly based on original thermal_core.c + * Copyright (C) 2008 Intel Corp + * Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com> + * Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/sysfs.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/string.h> + +#include "thermal_core.h" + +/* sys I/F for thermal zone */ + +static ssize_t +type_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + return sprintf(buf, "%s\n", tz->type); +} + +static ssize_t +temp_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int temperature, ret; + + ret = thermal_zone_get_temp(tz, &temperature); + + if (ret) + return ret; + + return sprintf(buf, "%d\n", temperature); +} + +static ssize_t +mode_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + enum thermal_device_mode mode; + int result; + + if (!tz->ops->get_mode) + return -EPERM; + + result = tz->ops->get_mode(tz, &mode); + if (result) + return result; + + return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled" + : "disabled"); +} + +static ssize_t +mode_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int result; + + if (!tz->ops->set_mode) + return -EPERM; + + if (!strncmp(buf, "enabled", sizeof("enabled") - 1)) + result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED); + else if (!strncmp(buf, "disabled", sizeof("disabled") - 1)) + result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED); + else + result = -EINVAL; + + if (result) + return result; + + return count; +} + +static ssize_t +trip_point_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + enum thermal_trip_type type; + int trip, result; + + if (!tz->ops->get_trip_type) + return -EPERM; + + if (sscanf(attr->attr.name, "trip_point_%d_type", &trip) != 1) + return -EINVAL; + + result = tz->ops->get_trip_type(tz, trip, &type); + if (result) + return result; + + switch (type) { + case THERMAL_TRIP_CRITICAL: + return sprintf(buf, "critical\n"); + case THERMAL_TRIP_HOT: + return sprintf(buf, "hot\n"); + case THERMAL_TRIP_PASSIVE: + return sprintf(buf, "passive\n"); + case THERMAL_TRIP_ACTIVE: + return sprintf(buf, "active\n"); + default: + return sprintf(buf, "unknown\n"); + } +} + +static ssize_t +trip_point_temp_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + int temperature; + + if (!tz->ops->set_trip_temp) + return -EPERM; + + if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1) + return -EINVAL; + + if (kstrtoint(buf, 10, &temperature)) + return -EINVAL; + + ret = tz->ops->set_trip_temp(tz, trip, temperature); + if (ret) + return ret; + + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + + return count; +} + +static ssize_t +trip_point_temp_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + int temperature; + + if (!tz->ops->get_trip_temp) + return -EPERM; + + if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1) + return -EINVAL; + + ret = tz->ops->get_trip_temp(tz, trip, &temperature); + + if (ret) + return ret; + + return sprintf(buf, "%d\n", temperature); +} + +static ssize_t +trip_point_hyst_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + int temperature; + + if (!tz->ops->set_trip_hyst) + return -EPERM; + + if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1) + return -EINVAL; + + if (kstrtoint(buf, 10, &temperature)) + return -EINVAL; + + /* + * We are not doing any check on the 'temperature' value + * here. The driver implementing 'set_trip_hyst' has to + * take care of this. + */ + ret = tz->ops->set_trip_hyst(tz, trip, temperature); + + if (!ret) + thermal_zone_set_trips(tz); + + return ret ? ret : count; +} + +static ssize_t +trip_point_hyst_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int trip, ret; + int temperature; + + if (!tz->ops->get_trip_hyst) + return -EPERM; + + if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1) + return -EINVAL; + + ret = tz->ops->get_trip_hyst(tz, trip, &temperature); + + return ret ? ret : sprintf(buf, "%d\n", temperature); +} + +static ssize_t +passive_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int state; + + if (sscanf(buf, "%d\n", &state) != 1) + return -EINVAL; + + /* sanity check: values below 1000 millicelcius don't make sense + * and can cause the system to go into a thermal heart attack + */ + if (state && state < 1000) + return -EINVAL; + + if (state && !tz->forced_passive) { + if (!tz->passive_delay) + tz->passive_delay = 1000; + thermal_zone_device_rebind_exception(tz, "Processor", + sizeof("Processor")); + } else if (!state && tz->forced_passive) { + tz->passive_delay = 0; + thermal_zone_device_unbind_exception(tz, "Processor", + sizeof("Processor")); + } + + tz->forced_passive = state; + + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + + return count; +} + +static ssize_t +passive_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + return sprintf(buf, "%d\n", tz->forced_passive); +} + +static ssize_t +policy_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + char name[THERMAL_NAME_LENGTH]; + int ret; + + snprintf(name, sizeof(name), "%s", buf); + + ret = thermal_zone_device_set_policy(tz, name); + if (!ret) + ret = count; + + return ret; +} + +static ssize_t +policy_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + return sprintf(buf, "%s\n", tz->governor->name); +} + +static ssize_t +available_policies_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + return thermal_build_list_of_policies(buf); +} + +#if (IS_ENABLED(CONFIG_THERMAL_EMULATION)) +static ssize_t +emul_temp_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + int ret = 0; + int temperature; + + if (kstrtoint(buf, 10, &temperature)) + return -EINVAL; + + if (!tz->ops->set_emul_temp) { + mutex_lock(&tz->lock); + tz->emul_temperature = temperature; + mutex_unlock(&tz->lock); + } else { + ret = tz->ops->set_emul_temp(tz, temperature); + } + + if (!ret) + thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + + return ret ? ret : count; +} +static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store); +#endif + +static ssize_t +sustainable_power_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + + if (tz->tzp) + return sprintf(buf, "%u\n", tz->tzp->sustainable_power); + else + return -EIO; +} + +static ssize_t +sustainable_power_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct thermal_zone_device *tz = to_thermal_zone(dev); + u32 sustainable_power; + + if (!tz->tzp) + return -EIO; + + if (kstrtou32(buf, 10, &sustainable_power)) + return -EINVAL; + + tz->tzp->sustainable_power = sustainable_power; + + return count; +} + +#define create_s32_tzp_attr(name) \ + static ssize_t \ + name##_show(struct device *dev, struct device_attribute *devattr, \ + char *buf) \ + { \ + struct thermal_zone_device *tz = to_thermal_zone(dev); \ + \ + if (tz->tzp) \ + return sprintf(buf, "%d\n", tz->tzp->name); \ + else \ + return -EIO; \ + } \ + \ + static ssize_t \ + name##_store(struct device *dev, struct device_attribute *devattr, \ + const char *buf, size_t count) \ + { \ + struct thermal_zone_device *tz = to_thermal_zone(dev); \ + s32 value; \ + \ + if (!tz->tzp) \ + return -EIO; \ + \ + if (kstrtos32(buf, 10, &value)) \ + return -EINVAL; \ + \ + tz->tzp->name = value; \ + \ + return count; \ + } \ + static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, name##_show, name##_store) + +create_s32_tzp_attr(k_po); +create_s32_tzp_attr(k_pu); +create_s32_tzp_attr(k_i); +create_s32_tzp_attr(k_d); +create_s32_tzp_attr(integral_cutoff); +create_s32_tzp_attr(slope); +create_s32_tzp_attr(offset); +#undef create_s32_tzp_attr + +/* + * These are thermal zone device attributes that will always be present. + * All the attributes created for tzp (create_s32_tzp_attr) also are always + * present on the sysfs interface. + */ +static DEVICE_ATTR(type, 0444, type_show, NULL); +static DEVICE_ATTR(temp, 0444, temp_show, NULL); +static DEVICE_ATTR(policy, S_IRUGO | S_IWUSR, policy_show, policy_store); +static DEVICE_ATTR(available_policies, S_IRUGO, available_policies_show, NULL); +static DEVICE_ATTR(sustainable_power, S_IWUSR | S_IRUGO, sustainable_power_show, + sustainable_power_store); + +/* These thermal zone device attributes are created based on conditions */ +static DEVICE_ATTR(mode, 0644, mode_show, mode_store); +static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store); + +/* These attributes are unconditionally added to a thermal zone */ +static struct attribute *thermal_zone_dev_attrs[] = { + &dev_attr_type.attr, + &dev_attr_temp.attr, +#if (IS_ENABLED(CONFIG_THERMAL_EMULATION)) + &dev_attr_emul_temp.attr, +#endif + &dev_attr_policy.attr, + &dev_attr_available_policies.attr, + &dev_attr_sustainable_power.attr, + &dev_attr_k_po.attr, + &dev_attr_k_pu.attr, + &dev_attr_k_i.attr, + &dev_attr_k_d.attr, + &dev_attr_integral_cutoff.attr, + &dev_attr_slope.attr, + &dev_attr_offset.attr, + NULL, +}; + +static struct attribute_group thermal_zone_attribute_group = { + .attrs = thermal_zone_dev_attrs, +}; + +/* We expose mode only if .get_mode is present */ +static struct attribute *thermal_zone_mode_attrs[] = { + &dev_attr_mode.attr, + NULL, +}; + +static umode_t thermal_zone_mode_is_visible(struct kobject *kobj, + struct attribute *attr, + int attrno) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct thermal_zone_device *tz; + + tz = container_of(dev, struct thermal_zone_device, device); + + if (tz->ops->get_mode) + return attr->mode; + + return 0; +} + +static struct attribute_group thermal_zone_mode_attribute_group = { + .attrs = thermal_zone_mode_attrs, + .is_visible = thermal_zone_mode_is_visible, +}; + +/* We expose passive only if passive trips are present */ +static struct attribute *thermal_zone_passive_attrs[] = { + &dev_attr_passive.attr, + NULL, +}; + +static umode_t thermal_zone_passive_is_visible(struct kobject *kobj, + struct attribute *attr, + int attrno) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct thermal_zone_device *tz; + enum thermal_trip_type trip_type; + int count, passive = 0; + + tz = container_of(dev, struct thermal_zone_device, device); + + for (count = 0; count < tz->trips && !passive; count++) { + tz->ops->get_trip_type(tz, count, &trip_type); + + if (trip_type == THERMAL_TRIP_PASSIVE) + passive = 1; + } + + if (!passive) + return attr->mode; + + return 0; +} + +static struct attribute_group thermal_zone_passive_attribute_group = { + .attrs = thermal_zone_passive_attrs, + .is_visible = thermal_zone_passive_is_visible, +}; + +static const struct attribute_group *thermal_zone_attribute_groups[] = { + &thermal_zone_attribute_group, + &thermal_zone_mode_attribute_group, + &thermal_zone_passive_attribute_group, + /* This is not NULL terminated as we create the group dynamically */ +}; + +/** + * create_trip_attrs() - create attributes for trip points + * @tz: the thermal zone device + * @mask: Writeable trip point bitmap. + * + * helper function to instantiate sysfs entries for every trip + * point and its properties of a struct thermal_zone_device. + * + * Return: 0 on success, the proper error value otherwise. + */ +static int create_trip_attrs(struct thermal_zone_device *tz, int mask) +{ + struct attribute **attrs; + int indx; + + /* This function works only for zones with at least one trip */ + if (tz->trips <= 0) + return -EINVAL; + + tz->trip_type_attrs = kcalloc(tz->trips, sizeof(*tz->trip_type_attrs), + GFP_KERNEL); + if (!tz->trip_type_attrs) + return -ENOMEM; + + tz->trip_temp_attrs = kcalloc(tz->trips, sizeof(*tz->trip_temp_attrs), + GFP_KERNEL); + if (!tz->trip_temp_attrs) { + kfree(tz->trip_type_attrs); + return -ENOMEM; + } + + if (tz->ops->get_trip_hyst) { + tz->trip_hyst_attrs = kcalloc(tz->trips, + sizeof(*tz->trip_hyst_attrs), + GFP_KERNEL); + if (!tz->trip_hyst_attrs) { + kfree(tz->trip_type_attrs); + kfree(tz->trip_temp_attrs); + return -ENOMEM; + } + } + + attrs = kcalloc(tz->trips * 3 + 1, sizeof(*attrs), GFP_KERNEL); + if (!attrs) { + kfree(tz->trip_type_attrs); + kfree(tz->trip_temp_attrs); + if (tz->ops->get_trip_hyst) + kfree(tz->trip_hyst_attrs); + return -ENOMEM; + } + + for (indx = 0; indx < tz->trips; indx++) { + /* create trip type attribute */ + snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_type", indx); + + sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr); + tz->trip_type_attrs[indx].attr.attr.name = + tz->trip_type_attrs[indx].name; + tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO; + tz->trip_type_attrs[indx].attr.show = trip_point_type_show; + attrs[indx] = &tz->trip_type_attrs[indx].attr.attr; + + /* create trip temp attribute */ + snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_temp", indx); + + sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr); + tz->trip_temp_attrs[indx].attr.attr.name = + tz->trip_temp_attrs[indx].name; + tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO; + tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show; + if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS) && + mask & (1 << indx)) { + tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR; + tz->trip_temp_attrs[indx].attr.store = + trip_point_temp_store; + } + attrs[indx + tz->trips] = &tz->trip_temp_attrs[indx].attr.attr; + + /* create Optional trip hyst attribute */ + if (!tz->ops->get_trip_hyst) + continue; + snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_hyst", indx); + + sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr); + tz->trip_hyst_attrs[indx].attr.attr.name = + tz->trip_hyst_attrs[indx].name; + tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO; + tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show; + if (tz->ops->set_trip_hyst) { + tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR; + tz->trip_hyst_attrs[indx].attr.store = + trip_point_hyst_store; + } + attrs[indx + tz->trips * 2] = + &tz->trip_hyst_attrs[indx].attr.attr; + } + attrs[tz->trips * 3] = NULL; + + tz->trips_attribute_group.attrs = attrs; + + return 0; +} + +int thermal_zone_create_device_groups(struct thermal_zone_device *tz, + int mask) +{ + const struct attribute_group **groups; + int i, size, result; + + /* we need one extra for trips and the NULL to terminate the array */ + size = ARRAY_SIZE(thermal_zone_attribute_groups) + 2; + /* This also takes care of API requirement to be NULL terminated */ + groups = kcalloc(size, sizeof(*groups), GFP_KERNEL); + if (!groups) + return -ENOMEM; + + for (i = 0; i < size - 2; i++) + groups[i] = thermal_zone_attribute_groups[i]; + + if (tz->trips) { + result = create_trip_attrs(tz, mask); + if (result) { + kfree(groups); + + return result; + } + + groups[size - 2] = &tz->trips_attribute_group; + } + + tz->device.groups = groups; + + return 0; +} + +/* sys I/F for cooling device */ +static ssize_t +thermal_cooling_device_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_cooling_device *cdev = to_cooling_device(dev); + + return sprintf(buf, "%s\n", cdev->type); +} + +static ssize_t +thermal_cooling_device_max_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_cooling_device *cdev = to_cooling_device(dev); + unsigned long state; + int ret; + + ret = cdev->ops->get_max_state(cdev, &state); + if (ret) + return ret; + return sprintf(buf, "%ld\n", state); +} + +static ssize_t +thermal_cooling_device_cur_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_cooling_device *cdev = to_cooling_device(dev); + unsigned long state; + int ret; + + ret = cdev->ops->get_cur_state(cdev, &state); + if (ret) + return ret; + return sprintf(buf, "%ld\n", state); +} + +static ssize_t +thermal_cooling_device_cur_state_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_cooling_device *cdev = to_cooling_device(dev); + unsigned long state; + int result; + + if (sscanf(buf, "%ld\n", &state) != 1) + return -EINVAL; + + if ((long)state < 0) + return -EINVAL; + + result = cdev->ops->set_cur_state(cdev, state); + if (result) + return result; + return count; +} + +static struct device_attribute dev_attr_cdev_type = +__ATTR(type, 0444, thermal_cooling_device_type_show, NULL); +static DEVICE_ATTR(max_state, 0444, + thermal_cooling_device_max_state_show, NULL); +static DEVICE_ATTR(cur_state, 0644, + thermal_cooling_device_cur_state_show, + thermal_cooling_device_cur_state_store); + +static struct attribute *cooling_device_attrs[] = { + &dev_attr_cdev_type.attr, + &dev_attr_max_state.attr, + &dev_attr_cur_state.attr, + NULL, +}; + +static const struct attribute_group cooling_device_attr_group = { + .attrs = cooling_device_attrs, +}; + +static const struct attribute_group *cooling_device_attr_groups[] = { + &cooling_device_attr_group, + NULL, +}; + +void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *cdev) +{ + cdev->device.groups = cooling_device_attr_groups; +} + +/* these helper will be used only at the time of bindig */ +ssize_t +thermal_cooling_device_trip_point_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_instance *instance; + + instance = + container_of(attr, struct thermal_instance, attr); + + if (instance->trip == THERMAL_TRIPS_NONE) + return sprintf(buf, "-1\n"); + else + return sprintf(buf, "%d\n", instance->trip); +} + +ssize_t +thermal_cooling_device_weight_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct thermal_instance *instance; + + instance = container_of(attr, struct thermal_instance, weight_attr); + + return sprintf(buf, "%d\n", instance->weight); +} + +ssize_t +thermal_cooling_device_weight_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct thermal_instance *instance; + int ret, weight; + + ret = kstrtoint(buf, 0, &weight); + if (ret) + return ret; + + instance = container_of(attr, struct thermal_instance, weight_attr); + instance->weight = weight; + + return count; +} diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 06ea9766a70a..ba9c302454fb 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -1298,7 +1298,7 @@ int ti_bandgap_probe(struct platform_device *pdev) if (IS_ERR(bgp->div_clk)) { dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n"); ret = PTR_ERR(bgp->div_clk); - goto free_irqs; + goto put_fclock; } for (i = 0; i < bgp->conf->sensor_count; i++) { @@ -1430,8 +1430,9 @@ disable_clk: if (TI_BANDGAP_HAS(bgp, CLK_CTRL)) clk_disable_unprepare(bgp->fclock); put_clks: - clk_put(bgp->fclock); clk_put(bgp->div_clk); +put_fclock: + clk_put(bgp->fclock); free_irqs: if (TI_BANDGAP_HAS(bgp, TSHUT)) { free_irq(gpio_to_irq(bgp->tshut_gpio), NULL); diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c index 95f4c1bcdb4c..d93eee2f101b 100644 --- a/drivers/thermal/x86_pkg_temp_thermal.c +++ b/drivers/thermal/x86_pkg_temp_thermal.c @@ -54,37 +54,33 @@ MODULE_PARM_DESC(notify_delay_ms, * is some wrong values returned by cpuid for number of thresholds. */ #define MAX_NUMBER_OF_TRIPS 2 -/* Limit number of package temp zones */ -#define MAX_PKG_TEMP_ZONE_IDS 256 - -struct phy_dev_entry { - struct list_head list; - u16 phys_proc_id; - u16 first_cpu; - u32 tj_max; - int ref_cnt; - u32 start_pkg_therm_low; - u32 start_pkg_therm_high; - struct thermal_zone_device *tzone; + +struct pkg_device { + int cpu; + bool work_scheduled; + u32 tj_max; + u32 msr_pkg_therm_low; + u32 msr_pkg_therm_high; + struct delayed_work work; + struct thermal_zone_device *tzone; + struct cpumask cpumask; }; static struct thermal_zone_params pkg_temp_tz_params = { .no_hwmon = true, }; -/* List maintaining number of package instances */ -static LIST_HEAD(phy_dev_list); -static DEFINE_MUTEX(phy_dev_list_mutex); - -/* Interrupt to work function schedule queue */ -static DEFINE_PER_CPU(struct delayed_work, pkg_temp_thermal_threshold_work); +/* Keep track of how many package pointers we allocated in init() */ +static int max_packages __read_mostly; +/* Array of package pointers */ +static struct pkg_device **packages; +/* Serializes interrupt notification, work and hotplug */ +static DEFINE_SPINLOCK(pkg_temp_lock); +/* Protects zone operation in the work function against hotplug removal */ +static DEFINE_MUTEX(thermal_zone_mutex); -/* To track if the work is already scheduled on a package */ -static u8 *pkg_work_scheduled; - -/* Spin lock to prevent races with pkg_work_scheduled */ -static spinlock_t pkg_work_lock; -static u16 max_phy_id; +/* The dynamically assigned cpu hotplug state for module_exit() */ +static enum cpuhp_state pkg_thermal_hp_state __read_mostly; /* Debug counters to show using debugfs */ static struct dentry *debugfs; @@ -116,22 +112,20 @@ err_out: return -ENOENT; } -static struct phy_dev_entry - *pkg_temp_thermal_get_phy_entry(unsigned int cpu) +/* + * Protection: + * + * - cpu hotplug: Read serialized by cpu hotplug lock + * Write must hold pkg_temp_lock + * + * - Other callsites: Must hold pkg_temp_lock + */ +static struct pkg_device *pkg_temp_thermal_get_dev(unsigned int cpu) { - u16 phys_proc_id = topology_physical_package_id(cpu); - struct phy_dev_entry *phy_ptr; - - mutex_lock(&phy_dev_list_mutex); - - list_for_each_entry(phy_ptr, &phy_dev_list, list) - if (phy_ptr->phys_proc_id == phys_proc_id) { - mutex_unlock(&phy_dev_list_mutex); - return phy_ptr; - } - - mutex_unlock(&phy_dev_list_mutex); + int pkgid = topology_logical_package_id(cpu); + if (pkgid >= 0 && pkgid < max_packages) + return packages[pkgid]; return NULL; } @@ -141,61 +135,44 @@ static struct phy_dev_entry */ static int get_tj_max(int cpu, u32 *tj_max) { - u32 eax, edx; - u32 val; + u32 eax, edx, val; int err; err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); if (err) - goto err_ret; - else { - val = (eax >> 16) & 0xff; - if (val) - *tj_max = val * 1000; - else { - err = -EINVAL; - goto err_ret; - } - } + return err; - return 0; -err_ret: - *tj_max = 0; - return err; + val = (eax >> 16) & 0xff; + *tj_max = val * 1000; + + return val ? 0 : -EINVAL; } static int sys_get_curr_temp(struct thermal_zone_device *tzd, int *temp) { + struct pkg_device *pkgdev = tzd->devdata; u32 eax, edx; - struct phy_dev_entry *phy_dev_entry; - phy_dev_entry = tzd->devdata; - rdmsr_on_cpu(phy_dev_entry->first_cpu, MSR_IA32_PACKAGE_THERM_STATUS, - &eax, &edx); + rdmsr_on_cpu(pkgdev->cpu, MSR_IA32_PACKAGE_THERM_STATUS, &eax, &edx); if (eax & 0x80000000) { - *temp = phy_dev_entry->tj_max - - ((eax >> 16) & 0x7f) * 1000; + *temp = pkgdev->tj_max - ((eax >> 16) & 0x7f) * 1000; pr_debug("sys_get_curr_temp %d\n", *temp); return 0; } - return -EINVAL; } static int sys_get_trip_temp(struct thermal_zone_device *tzd, - int trip, int *temp) + int trip, int *temp) { - u32 eax, edx; - struct phy_dev_entry *phy_dev_entry; - u32 mask, shift; + struct pkg_device *pkgdev = tzd->devdata; unsigned long thres_reg_value; + u32 mask, shift, eax, edx; int ret; if (trip >= MAX_NUMBER_OF_TRIPS) return -EINVAL; - phy_dev_entry = tzd->devdata; - if (trip) { mask = THERM_MASK_THRESHOLD1; shift = THERM_SHIFT_THRESHOLD1; @@ -204,14 +181,14 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd, shift = THERM_SHIFT_THRESHOLD0; } - ret = rdmsr_on_cpu(phy_dev_entry->first_cpu, - MSR_IA32_PACKAGE_THERM_INTERRUPT, &eax, &edx); + ret = rdmsr_on_cpu(pkgdev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, + &eax, &edx); if (ret < 0) - return -EINVAL; + return ret; thres_reg_value = (eax & mask) >> shift; if (thres_reg_value) - *temp = phy_dev_entry->tj_max - thres_reg_value * 1000; + *temp = pkgdev->tj_max - thres_reg_value * 1000; else *temp = 0; pr_debug("sys_get_trip_temp %d\n", *temp); @@ -219,24 +196,20 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzd, return 0; } -static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, - int temp) +static int +sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, int temp) { - u32 l, h; - struct phy_dev_entry *phy_dev_entry; - u32 mask, shift, intr; + struct pkg_device *pkgdev = tzd->devdata; + u32 l, h, mask, shift, intr; int ret; - phy_dev_entry = tzd->devdata; - - if (trip >= MAX_NUMBER_OF_TRIPS || temp >= phy_dev_entry->tj_max) + if (trip >= MAX_NUMBER_OF_TRIPS || temp >= pkgdev->tj_max) return -EINVAL; - ret = rdmsr_on_cpu(phy_dev_entry->first_cpu, - MSR_IA32_PACKAGE_THERM_INTERRUPT, - &l, &h); + ret = rdmsr_on_cpu(pkgdev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, + &l, &h); if (ret < 0) - return -EINVAL; + return ret; if (trip) { mask = THERM_MASK_THRESHOLD1; @@ -252,24 +225,20 @@ static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, * When users space sets a trip temperature == 0, which is indication * that, it is no longer interested in receiving notifications. */ - if (!temp) + if (!temp) { l &= ~intr; - else { - l |= (phy_dev_entry->tj_max - temp)/1000 << shift; + } else { + l |= (pkgdev->tj_max - temp)/1000 << shift; l |= intr; } - return wrmsr_on_cpu(phy_dev_entry->first_cpu, - MSR_IA32_PACKAGE_THERM_INTERRUPT, - l, h); + return wrmsr_on_cpu(pkgdev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); } -static int sys_get_trip_type(struct thermal_zone_device *thermal, - int trip, enum thermal_trip_type *type) +static int sys_get_trip_type(struct thermal_zone_device *thermal, int trip, + enum thermal_trip_type *type) { - *type = THERMAL_TRIP_PASSIVE; - return 0; } @@ -281,7 +250,7 @@ static struct thermal_zone_device_ops tzone_ops = { .set_trip_temp = sys_set_trip_temp, }; -static bool pkg_temp_thermal_platform_thermal_rate_control(void) +static bool pkg_thermal_rate_control(void) { return true; } @@ -289,8 +258,8 @@ static bool pkg_temp_thermal_platform_thermal_rate_control(void) /* Enable threshold interrupt on local package/cpu */ static inline void enable_pkg_thres_interrupt(void) { - u32 l, h; u8 thres_0, thres_1; + u32 l, h; rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); /* only enable/disable if it had valid threshold value */ @@ -307,271 +276,232 @@ static inline void enable_pkg_thres_interrupt(void) static inline void disable_pkg_thres_interrupt(void) { u32 l, h; + rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); - wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, - l & (~THERM_INT_THRESHOLD0_ENABLE) & - (~THERM_INT_THRESHOLD1_ENABLE), h); + + l &= ~(THERM_INT_THRESHOLD0_ENABLE | THERM_INT_THRESHOLD1_ENABLE); + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); } static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work) { - __u64 msr_val; + struct thermal_zone_device *tzone = NULL; int cpu = smp_processor_id(); - int phy_id = topology_physical_package_id(cpu); - struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu); - bool notify = false; - unsigned long flags; - - if (!phdev) - return; + struct pkg_device *pkgdev; + u64 msr_val, wr_val; - spin_lock_irqsave(&pkg_work_lock, flags); + mutex_lock(&thermal_zone_mutex); + spin_lock_irq(&pkg_temp_lock); ++pkg_work_cnt; - if (unlikely(phy_id > max_phy_id)) { - spin_unlock_irqrestore(&pkg_work_lock, flags); + + pkgdev = pkg_temp_thermal_get_dev(cpu); + if (!pkgdev) { + spin_unlock_irq(&pkg_temp_lock); + mutex_unlock(&thermal_zone_mutex); return; } - pkg_work_scheduled[phy_id] = 0; - spin_unlock_irqrestore(&pkg_work_lock, flags); + pkgdev->work_scheduled = false; - enable_pkg_thres_interrupt(); rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); - if (msr_val & THERM_LOG_THRESHOLD0) { - wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, - msr_val & ~THERM_LOG_THRESHOLD0); - notify = true; - } - if (msr_val & THERM_LOG_THRESHOLD1) { - wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, - msr_val & ~THERM_LOG_THRESHOLD1); - notify = true; - } - if (notify) { - pr_debug("thermal_zone_device_update\n"); - thermal_zone_device_update(phdev->tzone, - THERMAL_EVENT_UNSPECIFIED); + wr_val = msr_val & ~(THERM_LOG_THRESHOLD0 | THERM_LOG_THRESHOLD1); + if (wr_val != msr_val) { + wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, wr_val); + tzone = pkgdev->tzone; } + + enable_pkg_thres_interrupt(); + spin_unlock_irq(&pkg_temp_lock); + + /* + * If tzone is not NULL, then thermal_zone_mutex will prevent the + * concurrent removal in the cpu offline callback. + */ + if (tzone) + thermal_zone_device_update(tzone, THERMAL_EVENT_UNSPECIFIED); + + mutex_unlock(&thermal_zone_mutex); } -static int pkg_temp_thermal_platform_thermal_notify(__u64 msr_val) +static void pkg_thermal_schedule_work(int cpu, struct delayed_work *work) +{ + unsigned long ms = msecs_to_jiffies(notify_delay_ms); + + schedule_delayed_work_on(cpu, work, ms); +} + +static int pkg_thermal_notify(u64 msr_val) { - unsigned long flags; int cpu = smp_processor_id(); - int phy_id = topology_physical_package_id(cpu); + struct pkg_device *pkgdev; + unsigned long flags; - /* - * When a package is in interrupted state, all CPU's in that package - * are in the same interrupt state. So scheduling on any one CPU in - * the package is enough and simply return for others. - */ - spin_lock_irqsave(&pkg_work_lock, flags); + spin_lock_irqsave(&pkg_temp_lock, flags); ++pkg_interrupt_cnt; - if (unlikely(phy_id > max_phy_id) || unlikely(!pkg_work_scheduled) || - pkg_work_scheduled[phy_id]) { - disable_pkg_thres_interrupt(); - spin_unlock_irqrestore(&pkg_work_lock, flags); - return -EINVAL; - } - pkg_work_scheduled[phy_id] = 1; - spin_unlock_irqrestore(&pkg_work_lock, flags); disable_pkg_thres_interrupt(); - schedule_delayed_work_on(cpu, - &per_cpu(pkg_temp_thermal_threshold_work, cpu), - msecs_to_jiffies(notify_delay_ms)); - return 0; -} -static int find_siblings_cpu(int cpu) -{ - int i; - int id = topology_physical_package_id(cpu); - - for_each_online_cpu(i) - if (i != cpu && topology_physical_package_id(i) == id) - return i; + /* Work is per package, so scheduling it once is enough. */ + pkgdev = pkg_temp_thermal_get_dev(cpu); + if (pkgdev && !pkgdev->work_scheduled) { + pkgdev->work_scheduled = true; + pkg_thermal_schedule_work(pkgdev->cpu, &pkgdev->work); + } + spin_unlock_irqrestore(&pkg_temp_lock, flags); return 0; } static int pkg_temp_thermal_device_add(unsigned int cpu) { - int err; - u32 tj_max; - struct phy_dev_entry *phy_dev_entry; - int thres_count; - u32 eax, ebx, ecx, edx; - u8 *temp; - unsigned long flags; + int pkgid = topology_logical_package_id(cpu); + u32 tj_max, eax, ebx, ecx, edx; + struct pkg_device *pkgdev; + int thres_count, err; + + if (pkgid >= max_packages) + return -ENOMEM; cpuid(6, &eax, &ebx, &ecx, &edx); thres_count = ebx & 0x07; if (!thres_count) return -ENODEV; - if (topology_physical_package_id(cpu) > MAX_PKG_TEMP_ZONE_IDS) - return -ENODEV; - thres_count = clamp_val(thres_count, 0, MAX_NUMBER_OF_TRIPS); err = get_tj_max(cpu, &tj_max); if (err) - goto err_ret; - - mutex_lock(&phy_dev_list_mutex); + return err; - phy_dev_entry = kzalloc(sizeof(*phy_dev_entry), GFP_KERNEL); - if (!phy_dev_entry) { - err = -ENOMEM; - goto err_ret_unlock; - } + pkgdev = kzalloc(sizeof(*pkgdev), GFP_KERNEL); + if (!pkgdev) + return -ENOMEM; - spin_lock_irqsave(&pkg_work_lock, flags); - if (topology_physical_package_id(cpu) > max_phy_id) - max_phy_id = topology_physical_package_id(cpu); - temp = krealloc(pkg_work_scheduled, - (max_phy_id+1) * sizeof(u8), GFP_ATOMIC); - if (!temp) { - spin_unlock_irqrestore(&pkg_work_lock, flags); - err = -ENOMEM; - goto err_ret_free; - } - pkg_work_scheduled = temp; - pkg_work_scheduled[topology_physical_package_id(cpu)] = 0; - spin_unlock_irqrestore(&pkg_work_lock, flags); - - phy_dev_entry->phys_proc_id = topology_physical_package_id(cpu); - phy_dev_entry->first_cpu = cpu; - phy_dev_entry->tj_max = tj_max; - phy_dev_entry->ref_cnt = 1; - phy_dev_entry->tzone = thermal_zone_device_register("x86_pkg_temp", + INIT_DELAYED_WORK(&pkgdev->work, pkg_temp_thermal_threshold_work_fn); + pkgdev->cpu = cpu; + pkgdev->tj_max = tj_max; + pkgdev->tzone = thermal_zone_device_register("x86_pkg_temp", thres_count, - (thres_count == MAX_NUMBER_OF_TRIPS) ? - 0x03 : 0x01, - phy_dev_entry, &tzone_ops, &pkg_temp_tz_params, 0, 0); - if (IS_ERR(phy_dev_entry->tzone)) { - err = PTR_ERR(phy_dev_entry->tzone); - goto err_ret_free; + (thres_count == MAX_NUMBER_OF_TRIPS) ? 0x03 : 0x01, + pkgdev, &tzone_ops, &pkg_temp_tz_params, 0, 0); + if (IS_ERR(pkgdev->tzone)) { + err = PTR_ERR(pkgdev->tzone); + kfree(pkgdev); + return err; } /* Store MSR value for package thermal interrupt, to restore at exit */ - rdmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, - &phy_dev_entry->start_pkg_therm_low, - &phy_dev_entry->start_pkg_therm_high); - - list_add_tail(&phy_dev_entry->list, &phy_dev_list); - pr_debug("pkg_temp_thermal_device_add :phy_id %d cpu %d\n", - phy_dev_entry->phys_proc_id, cpu); - - mutex_unlock(&phy_dev_list_mutex); + rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, pkgdev->msr_pkg_therm_low, + pkgdev->msr_pkg_therm_high); + cpumask_set_cpu(cpu, &pkgdev->cpumask); + spin_lock_irq(&pkg_temp_lock); + packages[pkgid] = pkgdev; + spin_unlock_irq(&pkg_temp_lock); return 0; - -err_ret_free: - kfree(phy_dev_entry); -err_ret_unlock: - mutex_unlock(&phy_dev_list_mutex); - -err_ret: - return err; } -static int pkg_temp_thermal_device_remove(unsigned int cpu) +static int pkg_thermal_cpu_offline(unsigned int cpu) { - struct phy_dev_entry *n; - u16 phys_proc_id = topology_physical_package_id(cpu); - struct phy_dev_entry *phdev = - pkg_temp_thermal_get_phy_entry(cpu); + struct pkg_device *pkgdev = pkg_temp_thermal_get_dev(cpu); + bool lastcpu, was_target; + int target; - if (!phdev) - return -ENODEV; + if (!pkgdev) + return 0; - mutex_lock(&phy_dev_list_mutex); - /* If we are loosing the first cpu for this package, we need change */ - if (phdev->first_cpu == cpu) { - phdev->first_cpu = find_siblings_cpu(cpu); - pr_debug("thermal_device_remove: first cpu switched %d\n", - phdev->first_cpu); + target = cpumask_any_but(&pkgdev->cpumask, cpu); + cpumask_clear_cpu(cpu, &pkgdev->cpumask); + lastcpu = target >= nr_cpu_ids; + /* + * Remove the sysfs files, if this is the last cpu in the package + * before doing further cleanups. + */ + if (lastcpu) { + struct thermal_zone_device *tzone = pkgdev->tzone; + + /* + * We must protect against a work function calling + * thermal_zone_update, after/while unregister. We null out + * the pointer under the zone mutex, so the worker function + * won't try to call. + */ + mutex_lock(&thermal_zone_mutex); + pkgdev->tzone = NULL; + mutex_unlock(&thermal_zone_mutex); + + thermal_zone_device_unregister(tzone); } + + /* Protect against work and interrupts */ + spin_lock_irq(&pkg_temp_lock); + /* - * It is possible that no siblings left as this was the last cpu - * going offline. We don't need to worry about this assignment - * as the phydev entry will be removed in this case and - * thermal zone is removed. - */ - --phdev->ref_cnt; - pr_debug("thermal_device_remove: pkg: %d cpu %d ref_cnt %d\n", - phys_proc_id, cpu, phdev->ref_cnt); - if (!phdev->ref_cnt) - list_for_each_entry_safe(phdev, n, &phy_dev_list, list) { - if (phdev->phys_proc_id == phys_proc_id) { - thermal_zone_device_unregister(phdev->tzone); - list_del(&phdev->list); - kfree(phdev); - break; - } - } - mutex_unlock(&phy_dev_list_mutex); + * Check whether this cpu was the current target and store the new + * one. When we drop the lock, then the interrupt notify function + * will see the new target. + */ + was_target = pkgdev->cpu == cpu; + pkgdev->cpu = target; - return 0; -} + /* + * If this is the last CPU in the package remove the package + * reference from the array and restore the interrupt MSR. When we + * drop the lock neither the interrupt notify function nor the + * worker will see the package anymore. + */ + if (lastcpu) { + packages[topology_logical_package_id(cpu)] = NULL; + /* After this point nothing touches the MSR anymore. */ + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + pkgdev->msr_pkg_therm_low, pkgdev->msr_pkg_therm_high); + } -static int get_core_online(unsigned int cpu) -{ - struct cpuinfo_x86 *c = &cpu_data(cpu); - struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu); - - /* Check if there is already an instance for this package */ - if (!phdev) { - if (!cpu_has(c, X86_FEATURE_DTHERM) || - !cpu_has(c, X86_FEATURE_PTS)) - return -ENODEV; - if (pkg_temp_thermal_device_add(cpu)) - return -ENODEV; - } else { - mutex_lock(&phy_dev_list_mutex); - ++phdev->ref_cnt; - pr_debug("get_core_online: cpu %d ref_cnt %d\n", - cpu, phdev->ref_cnt); - mutex_unlock(&phy_dev_list_mutex); + /* + * Check whether there is work scheduled and whether the work is + * targeted at the outgoing CPU. + */ + if (pkgdev->work_scheduled && was_target) { + /* + * To cancel the work we need to drop the lock, otherwise + * we might deadlock if the work needs to be flushed. + */ + spin_unlock_irq(&pkg_temp_lock); + cancel_delayed_work_sync(&pkgdev->work); + spin_lock_irq(&pkg_temp_lock); + /* + * If this is not the last cpu in the package and the work + * did not run after we dropped the lock above, then we + * need to reschedule the work, otherwise the interrupt + * stays disabled forever. + */ + if (!lastcpu && pkgdev->work_scheduled) + pkg_thermal_schedule_work(target, &pkgdev->work); } - INIT_DELAYED_WORK(&per_cpu(pkg_temp_thermal_threshold_work, cpu), - pkg_temp_thermal_threshold_work_fn); - pr_debug("get_core_online: cpu %d successful\n", cpu); + spin_unlock_irq(&pkg_temp_lock); + /* Final cleanup if this is the last cpu */ + if (lastcpu) + kfree(pkgdev); return 0; } -static void put_core_offline(unsigned int cpu) +static int pkg_thermal_cpu_online(unsigned int cpu) { - if (!pkg_temp_thermal_device_remove(cpu)) - cancel_delayed_work_sync( - &per_cpu(pkg_temp_thermal_threshold_work, cpu)); + struct pkg_device *pkgdev = pkg_temp_thermal_get_dev(cpu); + struct cpuinfo_x86 *c = &cpu_data(cpu); - pr_debug("put_core_offline: cpu %d\n", cpu); -} + /* Paranoia check */ + if (!cpu_has(c, X86_FEATURE_DTHERM) || !cpu_has(c, X86_FEATURE_PTS)) + return -ENODEV; -static int pkg_temp_thermal_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned long) hcpu; - - switch (action & ~CPU_TASKS_FROZEN) { - case CPU_ONLINE: - case CPU_DOWN_FAILED: - get_core_online(cpu); - break; - case CPU_DOWN_PREPARE: - put_core_offline(cpu); - break; + /* If the package exists, nothing to do */ + if (pkgdev) { + cpumask_set_cpu(cpu, &pkgdev->cpumask); + return 0; } - return NOTIFY_OK; + return pkg_temp_thermal_device_add(cpu); } -static struct notifier_block pkg_temp_thermal_notifier __refdata = { - .notifier_call = pkg_temp_thermal_cpu_callback, -}; - static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = { { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_PTS }, {} @@ -580,71 +510,46 @@ MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids); static int __init pkg_temp_thermal_init(void) { - int i; + int ret; if (!x86_match_cpu(pkg_temp_thermal_ids)) return -ENODEV; - spin_lock_init(&pkg_work_lock); - platform_thermal_package_notify = - pkg_temp_thermal_platform_thermal_notify; - platform_thermal_package_rate_control = - pkg_temp_thermal_platform_thermal_rate_control; + max_packages = topology_max_packages(); + packages = kzalloc(max_packages * sizeof(struct pkg_device *), GFP_KERNEL); + if (!packages) + return -ENOMEM; - cpu_notifier_register_begin(); - for_each_online_cpu(i) - if (get_core_online(i)) - goto err_ret; - __register_hotcpu_notifier(&pkg_temp_thermal_notifier); - cpu_notifier_register_done(); + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "thermal/x86_pkg:online", + pkg_thermal_cpu_online, pkg_thermal_cpu_offline); + if (ret < 0) + goto err; - pkg_temp_debugfs_init(); /* Don't care if fails */ + /* Store the state for module exit */ + pkg_thermal_hp_state = ret; - return 0; + platform_thermal_package_notify = pkg_thermal_notify; + platform_thermal_package_rate_control = pkg_thermal_rate_control; -err_ret: - for_each_online_cpu(i) - put_core_offline(i); - cpu_notifier_register_done(); - kfree(pkg_work_scheduled); - platform_thermal_package_notify = NULL; - platform_thermal_package_rate_control = NULL; + /* Don't care if it fails */ + pkg_temp_debugfs_init(); + return 0; - return -ENODEV; +err: + kfree(packages); + return ret; } +module_init(pkg_temp_thermal_init) static void __exit pkg_temp_thermal_exit(void) { - struct phy_dev_entry *phdev, *n; - int i; - - cpu_notifier_register_begin(); - __unregister_hotcpu_notifier(&pkg_temp_thermal_notifier); - mutex_lock(&phy_dev_list_mutex); - list_for_each_entry_safe(phdev, n, &phy_dev_list, list) { - /* Retore old MSR value for package thermal interrupt */ - wrmsr_on_cpu(phdev->first_cpu, - MSR_IA32_PACKAGE_THERM_INTERRUPT, - phdev->start_pkg_therm_low, - phdev->start_pkg_therm_high); - thermal_zone_device_unregister(phdev->tzone); - list_del(&phdev->list); - kfree(phdev); - } - mutex_unlock(&phy_dev_list_mutex); platform_thermal_package_notify = NULL; platform_thermal_package_rate_control = NULL; - for_each_online_cpu(i) - cancel_delayed_work_sync( - &per_cpu(pkg_temp_thermal_threshold_work, i)); - cpu_notifier_register_done(); - - kfree(pkg_work_scheduled); + cpuhp_remove_state(pkg_thermal_hp_state); debugfs_remove_recursive(debugfs); + kfree(packages); } - -module_init(pkg_temp_thermal_init) module_exit(pkg_temp_thermal_exit) MODULE_DESCRIPTION("X86 PKG TEMP Thermal Driver"); diff --git a/include/linux/devfreq_cooling.h b/include/linux/devfreq_cooling.h index 7adf6cc4b305..c35d0c0e0ada 100644 --- a/include/linux/devfreq_cooling.h +++ b/include/linux/devfreq_cooling.h @@ -20,7 +20,6 @@ #include <linux/devfreq.h> #include <linux/thermal.h> -#ifdef CONFIG_DEVFREQ_THERMAL /** * struct devfreq_cooling_power - Devfreq cooling power ops @@ -37,12 +36,16 @@ * @dyn_power_coeff * frequency * voltage^2 */ struct devfreq_cooling_power { - unsigned long (*get_static_power)(unsigned long voltage); - unsigned long (*get_dynamic_power)(unsigned long freq, + unsigned long (*get_static_power)(struct devfreq *devfreq, + unsigned long voltage); + unsigned long (*get_dynamic_power)(struct devfreq *devfreq, + unsigned long freq, unsigned long voltage); unsigned long dyn_power_coeff; }; +#ifdef CONFIG_DEVFREQ_THERMAL + struct thermal_cooling_device * of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, struct devfreq_cooling_power *dfc_power); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 511182a88e76..e275e98bdceb 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -28,6 +28,7 @@ #include <linux/of.h> #include <linux/idr.h> #include <linux/device.h> +#include <linux/sysfs.h> #include <linux/workqueue.h> #include <uapi/linux/thermal.h> @@ -204,6 +205,7 @@ struct thermal_zone_device { int id; char type[THERMAL_NAME_LENGTH]; struct device device; + struct attribute_group trips_attribute_group; struct thermal_attr *trip_temp_attrs; struct thermal_attr *trip_type_attrs; struct thermal_attr *trip_hyst_attrs; |