diff options
| -rw-r--r-- | Documentation/hwmon/tmp102 | 27 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/tmp102.c | 297 |
4 files changed, 335 insertions, 0 deletions
diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102 new file mode 100644 index 000000000000..239dded8539f --- /dev/null +++ b/Documentation/hwmon/tmp102 @@ -0,0 +1,27 @@ +Kernel driver tmp102 +==================== + +Supported chips: + * Texas Instruments TMP102 + Prefix: 'tmp102' + Addresses scanned: I2C 0x48 0x49 0x4a 0x4b + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html + +Author: + Steven King <sfking@fdwdc.com> + +Description +----------- + +The Texas Instruments TMP102 implements one temperature sensor. Limits can be +set through the Overtemperature Shutdown register and Hysteresis register. The +sensor is accurate to 0.5 degrees over the range of -25 to +85 C, and to 1.0 +degrees from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The +operating temperature has a minimum of -55 C and a maximum of +150 C. + +The TMP102 has a programmable update rate that can select between 8, 4, 1, and +0.5 Hz. (Currently the driver only supports the default of 4 Hz). + +The driver provides the common sysfs-interface for temperatures (see +/Documentation/hwmon/sysfs-interface under Temperatures). + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6dddad81281e..6d87892a6639 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -842,6 +842,16 @@ config SENSORS_THMC50 This driver can also be built as a module. If so, the module will be called thmc50. +config SENSORS_TMP102 + tristate "Texas Instruments TMP102 and compatibles" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Texas Instruments TMP102 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp102. + config SENSORS_TMP401 tristate "Texas Instruments TMP401 and compatibles" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 9b1364a4bd85..2138ceb1a713 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -91,6 +91,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_AMC6821) += amc6821.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o +obj-$(CONFIG_SENSORS_TMP102) += tmp102.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c new file mode 100644 index 000000000000..e4def62c0ebf --- /dev/null +++ b/drivers/hwmon/tmp102.c @@ -0,0 +1,297 @@ +/* Texas Instruments TMP102 SMBUS temperature sensor driver + * + * Copyright 2010 Steven King <sfking@fdwdc.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA + */ + + + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> + +#define DRIVER_NAME "tmp102" + +#define TMP102_TEMP_REG 0x00 +#define TMP102_CONF_REG 0x01 +/* note: these bit definitions are byte swapped */ +#define TMP102_CONF_SD 0x0100 +#define TMP102_CONF_TM 0x0200 +#define TMP102_CONF_POL 0x0400 +#define TMP102_CONF_F0 0x0800 +#define TMP102_CONF_F1 0x1000 +#define TMP102_CONF_R0 0x2000 +#define TMP102_CONF_R1 0x4000 +#define TMP102_CONF_OS 0x8000 +#define TMP102_CONF_EM 0x0010 +#define TMP102_CONF_AL 0x0020 +#define TMP102_CONF_CR0 0x0040 +#define TMP102_CONF_CR1 0x0080 +#define TMP102_TLOW_REG 0x02 +#define TMP102_THIGH_REG 0x03 + +struct tmp102 { + struct device *hwmon_dev; + struct mutex lock; + unsigned long last_update; + int temp[3]; +}; + +/* the TMP102 registers are big endian so we have to swab16 the values */ +static int tmp102_read_reg(struct i2c_client *client, u8 reg) +{ + int result = i2c_smbus_read_word_data(client, reg); + return result < 0 ? result : swab16(result); +} + +static int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val) +{ + return i2c_smbus_write_word_data(client, reg, swab16(val)); +} + +/* convert left adjusted 13bit TMP102 register value to miliCelsius */ +static int tmp102_reg_to_mC(s16 val) +{ + return (val * 1000) / 128; +} + +/* convert miliCelsius to left adjusted 13bit TMP102 register value */ +static u16 tmp102_mC_to_reg(int val) +{ + return (val * 128) / 1000; +} + +static const u8 tmp102_reg[] = { + TMP102_TEMP_REG, + TMP102_TLOW_REG, + TMP102_THIGH_REG, +}; + +static struct tmp102 *tmp102_update_device(struct i2c_client *client) +{ + struct tmp102 *tmp102 = i2c_get_clientdata(client); + + mutex_lock(&tmp102->lock); + if (time_after(jiffies, tmp102->last_update + HZ / 4)) { + int i; + for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) { + int status = tmp102_read_reg(client, tmp102_reg[i]); + if (status > -1) + tmp102->temp[i] = tmp102_reg_to_mC(status); + } + tmp102->last_update = jiffies; + } + mutex_unlock(&tmp102->lock); + return tmp102; +} + +static ssize_t tmp102_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); + struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev)); + + return sprintf(buf, "%d\n", tmp102->temp[sda->index]); +} + +static ssize_t tmp102_set_temp(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct tmp102 *tmp102 = i2c_get_clientdata(client); + long val; + int status = 0; + + if ((strict_strtol(buf, 10, &val) < 0) || (abs(val) > 150000)) + return -EINVAL; + mutex_lock(&tmp102->lock); + if (tmp102->temp[sda->index] != val) { + tmp102->temp[sda->index] = val; + status = tmp102_write_reg(client, tmp102_reg[sda->index], + tmp102_mC_to_reg(val)); + } + mutex_unlock(&tmp102->lock); + return status ? : count; +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, tmp102_show_temp, NULL , 0); + +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, tmp102_show_temp, + tmp102_set_temp, 1); + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, tmp102_show_temp, + tmp102_set_temp, 2); + +static struct attribute *tmp102_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + NULL +}; + +static const struct attribute_group tmp102_attr_group = { + .attrs = tmp102_attributes, +}; + +#define TMP102_CONFIG (TMP102_CONF_TM | TMP102_CONF_EM | TMP102_CONF_CR1) +#define TMP102_CONFIG_RD_ONLY (TMP102_CONF_R0 | TMP102_CONF_R1 | TMP102_CONF_AL) + +static int __devinit tmp102_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tmp102 *tmp102; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_dbg(&client->dev, "adapter doesnt support SMBUS\n"); + return -ENODEV; + } + + tmp102 = kzalloc(sizeof(*tmp102), GFP_KERNEL); + if (!tmp102) { + dev_dbg(&client->dev, "kzalloc failed\n"); + return -ENOMEM; + } + i2c_set_clientdata(client, tmp102); + + tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG); + status = tmp102_read_reg(client, TMP102_CONF_REG); + if (status < 0) { + dev_dbg(&client->dev, "error reading config register\n"); + goto fail0; + } + status &= ~TMP102_CONFIG_RD_ONLY; + if (status != TMP102_CONFIG) { + dev_dbg(&client->dev, "could not verify config settings\n"); + status = -EIO; + goto fail0; + } + tmp102->last_update = jiffies - HZ; + mutex_init(&tmp102->lock); + + status = sysfs_create_group(&client->dev.kobj, &tmp102_attr_group); + if (status) { + dev_dbg(&client->dev, "could not create sysfs files\n"); + goto fail0; + } + tmp102->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(tmp102->hwmon_dev)) { + dev_dbg(&client->dev, "unable to register hwmon device\n"); + status = PTR_ERR(tmp102->hwmon_dev); + goto fail1; + } + + dev_info(&client->dev, "initialized\n"); + + return 0; +fail1: + sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group); +fail0: + i2c_set_clientdata(client, NULL); + kfree(tmp102); + + return 0; +} + +static int __devexit tmp102_remove(struct i2c_client *client) +{ + struct tmp102 *tmp102 = i2c_get_clientdata(client); + + /* shutdown the chip */ + tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONF_SD); + + hwmon_device_unregister(tmp102->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group); + i2c_set_clientdata(client, NULL); + kfree(tmp102); + + return 0; +} + +#ifdef CONFIG_PM +static int tmp102_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONF_SD); + + return 0; +} + +static int tmp102_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG); + + return 0; +} + +static const struct dev_pm_ops tmp102_dev_pm_ops = { + .suspend = tmp102_suspend, + .resume = tmp102_resume, +}; + +#define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops) +#else +#define TMP102_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + +static const unsigned short normal_i2c[] = { + 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END +}; + +static const struct i2c_device_id tmp102_id[] = { + { DRIVER_NAME, 0 }, + { } +}; + +static struct i2c_driver tmp102_driver = { + .driver.name = DRIVER_NAME, + .driver.pm = TMP102_DEV_PM_OPS, + .class = I2C_CLASS_HWMON, + .probe = tmp102_probe, + .remove = __devexit_p(tmp102_remove), + .id_table = tmp102_id, + .address_list = normal_i2c, +}; + +static int __init tmp102_init(void) +{ + return i2c_add_driver(&tmp102_driver); +} +module_init(tmp102_init); + +static void __exit tmp102_exit(void) +{ + i2c_del_driver(&tmp102_driver); +} +module_exit(tmp102_exit); + + +MODULE_AUTHOR("Steven King <sfking@fdwdc.com>"); +MODULE_DESCRIPTION("Texas Instruments TMP102 temperature sensor driver"); +MODULE_LICENSE("GPL"); |