diff options
31 files changed, 1815 insertions, 630 deletions
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata new file mode 100644 index 000000000000..0a932155cbba --- /dev/null +++ b/Documentation/ABI/testing/sysfs-ata @@ -0,0 +1,99 @@ +What: /sys/class/ata_... +Date: August 2008 +Contact: Gwendal Grignou<gwendal@google.com> +Description: + +Provide a place in sysfs for storing the ATA topology of the system. This allows +retrieving various information about ATA objects. + +Files under /sys/class/ata_port +------------------------------- + + For each port, a directory ataX is created where X is the ata_port_id of + the port. The device parent is the ata host device. + +idle_irq (read) + + Number of IRQ received by the port while idle [some ata HBA only]. + +nr_pmp_links (read) + + If a SATA Port Multiplier (PM) is connected, number of link behind it. + +Files under /sys/class/ata_link +------------------------------- + + Behind each port, there is a ata_link. If there is a SATA PM in the + topology, 15 ata_link objects are created. + + If a link is behind a port, the directory name is linkX, where X is + ata_port_id of the port. + If a link is behind a PM, its name is linkX.Y where X is ata_port_id + of the parent port and Y the PM port. + +hw_sata_spd_limit + + Maximum speed supported by the connected SATA device. + +sata_spd_limit + + Maximum speed imposed by libata. + +sata_spd + + Current speed of the link [1.5, 3Gps,...]. + +Files under /sys/class/ata_device +--------------------------------- + + Behind each link, up to two ata device are created. + The name of the directory is devX[.Y].Z where: + - X is ata_port_id of the port where the device is connected, + - Y the port of the PM if any, and + - Z the device id: for PATA, there is usually 2 devices [0,1], + only 1 for SATA. + +class + Device class. Can be "ata" for disk, "atapi" for packet device, + "pmp" for PM, or "none" if no device was found behind the link. + +dma_mode + + Transfer modes supported by the device when in DMA mode. + Mostly used by PATA device. + +pio_mode + + Transfer modes supported by the device when in PIO mode. + Mostly used by PATA device. + +xfer_mode + + Current transfer mode. + +id + + Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17. + Only valid if the device is not a PM. + +gscr + + Cached result of the dump of PM GSCR register. + Valid registers are: + 0: SATA_PMP_GSCR_PROD_ID, + 1: SATA_PMP_GSCR_REV, + 2: SATA_PMP_GSCR_PORT_INFO, + 32: SATA_PMP_GSCR_ERROR, + 33: SATA_PMP_GSCR_ERROR_EN, + 64: SATA_PMP_GSCR_FEAT, + 96: SATA_PMP_GSCR_FEAT_EN, + 130: SATA_PMP_GSCR_SII_GPIO + Only valid if the device is a PM. + +spdn_cnt + + Number of time libata decided to lower the speed of link due to errors. + +ering + + Formatted output of the error ring of the device. diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index d5df04a395ca..c501af5b12b9 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -99,7 +99,7 @@ obj-$(CONFIG_ATA_GENERIC) += ata_generic.o # Should be last libata driver obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o -libata-objs := libata-core.o libata-scsi.o libata-eh.o +libata-y := libata-core.o libata-scsi.o libata-eh.o libata-transport.o libata-$(CONFIG_ATA_SFF) += libata-sff.o libata-$(CONFIG_SATA_PMP) += libata-pmp.o libata-$(CONFIG_ATA_ACPI) += libata-acpi.o diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 99d0e5a51148..328826381a2d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1208,9 +1208,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ata_port_pbar_desc(ap, AHCI_PCI_BAR, 0x100 + ap->port_no * 0x80, "port"); - /* set initial link pm policy */ - ap->pm_policy = NOT_AVAILABLE; - /* set enclosure management message type */ if (ap->flags & ATA_FLAG_EM) ap->em_message_type = hpriv->em_msg_type; diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index e5fdeebf9ef0..329cbbb91284 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -72,6 +72,7 @@ enum { AHCI_CMD_RESET = (1 << 8), AHCI_CMD_CLR_BUSY = (1 << 10), + RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ RX_FIS_SDB = 0x58, /* offset of SDB FIS data */ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ @@ -201,7 +202,6 @@ enum { AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ - AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ @@ -216,7 +216,7 @@ enum { AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_ACPI_SATA | ATA_FLAG_AN | - ATA_FLAG_IPM, + ATA_FLAG_LPM, ICH_MAP = 0x90, /* ICH MAP register */ diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 84b643270e7a..6fef1fa75c54 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -129,9 +129,6 @@ static int __init ahci_probe(struct platform_device *pdev) ata_port_desc(ap, "mmio %pR", mem); ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); - /* set initial link pm policy */ - ap->pm_policy = NOT_AVAILABLE; - /* set enclosure management message type */ if (ap->flags & ATA_FLAG_EM) ap->em_message_type = hpriv->em_msg_type; diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index cc5f7726bde7..6981f7680a00 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -35,6 +35,7 @@ enum { ATA_GEN_CLASS_MATCH = (1 << 0), ATA_GEN_FORCE_DMA = (1 << 1), + ATA_GEN_INTEL_IDER = (1 << 2), }; /** @@ -109,6 +110,49 @@ static struct ata_port_operations generic_port_ops = { static int all_generic_ide; /* Set to claim all devices */ /** + * is_intel_ider - identify intel IDE-R devices + * @dev: PCI device + * + * Distinguish Intel IDE-R controller devices from other Intel IDE + * devices. IDE-R devices have no timing registers and are in + * most respects virtual. They should be driven by the ata_generic + * driver. + * + * IDE-R devices have PCI offset 0xF8.L as zero, later Intel ATA has + * it non zero. All Intel ATA has 0x40 writable (timing), but it is + * not writable on IDE-R devices (this is guaranteed). + */ + +static int is_intel_ider(struct pci_dev *dev) +{ + /* For Intel IDE the value at 0xF8 is only zero on IDE-R + interfaces */ + u32 r; + u16 t; + + /* Check the manufacturing ID, it will be zero for IDE-R */ + pci_read_config_dword(dev, 0xF8, &r); + /* Not IDE-R: punt so that ata_(old)piix gets it */ + if (r != 0) + return 0; + /* 0xF8 will also be zero on some early Intel IDE devices + but they will have a sane timing register */ + pci_read_config_word(dev, 0x40, &t); + if (t != 0) + return 0; + /* Finally check if the timing register is writable so that + we eliminate any early devices hot-docked in a docking + station */ + pci_write_config_word(dev, 0x40, 1); + pci_read_config_word(dev, 0x40, &t); + if (t) { + pci_write_config_word(dev, 0x40, 0); + return 0; + } + return 1; +} + +/** * ata_generic_init - attach generic IDE * @dev: PCI device found * @id: match entry @@ -134,6 +178,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0) return -ENODEV; + if (id->driver_data & ATA_GEN_INTEL_IDER) + if (!is_intel_ider(dev)) + return -ENODEV; + /* Devices that need care */ if (dev->vendor == PCI_VENDOR_ID_UMC && dev->device == PCI_DEVICE_ID_UMC_UM8886A && @@ -186,7 +234,11 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, -#endif +#endif + /* Intel, IDE class device */ + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, + .driver_data = ATA_GEN_INTEL_IDER }, /* Must come last. If you add entries adjust this table appropriately */ { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL), .driver_data = ATA_GEN_CLASS_MATCH }, diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d712675d0a96..6cb14ca8ee85 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -158,7 +158,6 @@ struct piix_map_db { struct piix_host_priv { const int *map; u32 saved_iocfg; - spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */ void __iomem *sidpr; }; @@ -175,6 +174,8 @@ static int piix_sidpr_scr_read(struct ata_link *link, unsigned int reg, u32 *val); static int piix_sidpr_scr_write(struct ata_link *link, unsigned int reg, u32 val); +static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); static bool piix_irq_check(struct ata_port *ap); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); @@ -209,6 +210,8 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x248A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* Intel ICH3 (E7500/1) UDMA 100 */ { 0x8086, 0x248B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + /* Intel ICH4-L */ + { 0x8086, 0x24C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* Intel ICH4 (i845GV, i845E, i852, i855) UDMA 100 */ { 0x8086, 0x24CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, { 0x8086, 0x24CB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, @@ -348,11 +351,22 @@ static struct ata_port_operations ich_pata_ops = { .set_dmamode = ich_set_dmamode, }; +static struct device_attribute *piix_sidpr_shost_attrs[] = { + &dev_attr_link_power_management_policy, + NULL +}; + +static struct scsi_host_template piix_sidpr_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .shost_attrs = piix_sidpr_shost_attrs, +}; + static struct ata_port_operations piix_sidpr_sata_ops = { .inherits = &piix_sata_ops, .hardreset = sata_std_hardreset, .scr_read = piix_sidpr_scr_read, .scr_write = piix_sidpr_scr_write, + .set_lpm = piix_sidpr_set_lpm, }; static const struct piix_map_db ich5_map_db = { @@ -956,15 +970,12 @@ static int piix_sidpr_scr_read(struct ata_link *link, unsigned int reg, u32 *val) { struct piix_host_priv *hpriv = link->ap->host->private_data; - unsigned long flags; if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; - spin_lock_irqsave(&hpriv->sidpr_lock, flags); piix_sidpr_sel(link, reg); *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); - spin_unlock_irqrestore(&hpriv->sidpr_lock, flags); return 0; } @@ -972,18 +983,21 @@ static int piix_sidpr_scr_write(struct ata_link *link, unsigned int reg, u32 val) { struct piix_host_priv *hpriv = link->ap->host->private_data; - unsigned long flags; if (reg >= ARRAY_SIZE(piix_sidx_map)) return -EINVAL; - spin_lock_irqsave(&hpriv->sidpr_lock, flags); piix_sidpr_sel(link, reg); iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); - spin_unlock_irqrestore(&hpriv->sidpr_lock, flags); return 0; } +static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints) +{ + return sata_link_scr_lpm(link, policy, false); +} + static bool piix_irq_check(struct ata_port *ap) { if (unlikely(!ap->ioaddr.bmdma_addr)) @@ -1543,6 +1557,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, struct device *dev = &pdev->dev; struct ata_port_info port_info[2]; const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; + struct scsi_host_template *sht = &piix_sht; unsigned long port_flags; struct ata_host *host; struct piix_host_priv *hpriv; @@ -1577,7 +1592,6 @@ static int __devinit piix_init_one(struct pci_dev *pdev, hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; - spin_lock_init(&hpriv->sidpr_lock); /* Save IOCFG, this will be used for cable detection, quirk * detection and restoration on detach. This is necessary @@ -1612,6 +1626,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev, rc = piix_init_sidpr(host); if (rc) return rc; + if (host->ports[0]->ops == &piix_sidpr_sata_ops) + sht = &piix_sidpr_sht; } /* apply IOCFG bit18 quirk */ @@ -1638,7 +1654,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, host->flags |= ATA_HOST_PARALLEL_SCAN; pci_set_master(pdev); - return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &piix_sht); + return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); } static void piix_remove_one(struct pci_dev *pdev) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 8eea309ea212..ebc08d65b3dd 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -56,9 +56,8 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip) module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); -static int ahci_enable_alpm(struct ata_port *ap, - enum link_pm policy); -static void ahci_disable_alpm(struct ata_port *ap); +static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); static ssize_t ahci_led_show(struct ata_port *ap, char *buf); static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, size_t size); @@ -164,8 +163,7 @@ struct ata_port_operations ahci_ops = { .pmp_attach = ahci_pmp_attach, .pmp_detach = ahci_pmp_detach, - .enable_pm = ahci_enable_alpm, - .disable_pm = ahci_disable_alpm, + .set_lpm = ahci_set_lpm, .em_show = ahci_led_show, .em_store = ahci_led_store, .sw_activity_show = ahci_activity_show, @@ -569,7 +567,7 @@ int ahci_stop_engine(struct ata_port *ap) writel(tmp, port_mmio + PORT_CMD); /* wait for engine to stop. This could be as long as 500 msec */ - tmp = ata_wait_register(port_mmio + PORT_CMD, + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); if (tmp & PORT_CMD_LIST_ON) return -EIO; @@ -616,7 +614,7 @@ static int ahci_stop_fis_rx(struct ata_port *ap) writel(tmp, port_mmio + PORT_CMD); /* wait for completion, spec says 500ms, give it 1000 */ - tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_FIS_ON, PORT_CMD_FIS_ON, 10, 1000); if (tmp & PORT_CMD_FIS_ON) return -EBUSY; @@ -642,127 +640,56 @@ static void ahci_power_up(struct ata_port *ap) writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); } -static void ahci_disable_alpm(struct ata_port *ap) +static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned int hints) { + struct ata_port *ap = link->ap; struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; struct ahci_port_priv *pp = ap->private_data; - - /* IPM bits should be disabled by libata-core */ - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); - - /* disable ALPM and ASP */ - cmd &= ~PORT_CMD_ASP; - cmd &= ~PORT_CMD_ALPE; - - /* force the interface back to active */ - cmd |= PORT_CMD_ICC_ACTIVE; - - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); - - /* wait 10ms to be sure we've come out of any low power state */ - msleep(10); - - /* clear out any PhyRdy stuff from interrupt status */ - writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT); - - /* go ahead and clean out PhyRdy Change from Serror too */ - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); - - /* - * Clear flag to indicate that we should ignore all PhyRdy - * state changes - */ - hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG; - - /* - * Enable interrupts on Phy Ready. - */ - pp->intr_mask |= PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); - - /* - * don't change the link pm policy - we can be called - * just to turn of link pm temporarily - */ -} - -static int ahci_enable_alpm(struct ata_port *ap, - enum link_pm policy) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - struct ahci_port_priv *pp = ap->private_data; - u32 asp; - /* Make sure the host is capable of link power management */ - if (!(hpriv->cap & HOST_CAP_ALPM)) - return -EINVAL; - - switch (policy) { - case MAX_PERFORMANCE: - case NOT_AVAILABLE: + if (policy != ATA_LPM_MAX_POWER) { /* - * if we came here with NOT_AVAILABLE, - * it just means this is the first time we - * have tried to enable - default to max performance, - * and let the user go to lower power modes on request. + * Disable interrupts on Phy Ready. This keeps us from + * getting woken up due to spurious phy ready + * interrupts. */ - ahci_disable_alpm(ap); - return 0; - case MIN_POWER: - /* configure HBA to enter SLUMBER */ - asp = PORT_CMD_ASP; - break; - case MEDIUM_POWER: - /* configure HBA to enter PARTIAL */ - asp = 0; - break; - default: - return -EINVAL; + pp->intr_mask &= ~PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + + sata_link_scr_lpm(link, policy, false); } - /* - * Disable interrupts on Phy Ready. This keeps us from - * getting woken up due to spurious phy ready interrupts - * TBD - Hot plug should be done via polling now, is - * that even supported? - */ - pp->intr_mask &= ~PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + if (hpriv->cap & HOST_CAP_ALPM) { + u32 cmd = readl(port_mmio + PORT_CMD); - /* - * Set a flag to indicate that we should ignore all PhyRdy - * state changes since these can happen now whenever we - * change link state - */ - hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG; + if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) { + cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE); + cmd |= PORT_CMD_ICC_ACTIVE; - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); + writel(cmd, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); - /* - * Set ASP based on Policy - */ - cmd |= asp; + /* wait 10ms to be sure we've come out of LPM state */ + ata_msleep(ap, 10); + } else { + cmd |= PORT_CMD_ALPE; + if (policy == ATA_LPM_MIN_POWER) + cmd |= PORT_CMD_ASP; - /* - * Setting this bit will instruct the HBA to aggressively - * enter a lower power link state when it's appropriate and - * based on the value set above for ASP - */ - cmd |= PORT_CMD_ALPE; + /* write out new cmd value */ + writel(cmd, port_mmio + PORT_CMD); + } + } - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); + if (policy == ATA_LPM_MAX_POWER) { + sata_link_scr_lpm(link, policy, false); + + /* turn PHYRDY IRQ back on */ + pp->intr_mask |= PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + } - /* IPM bits should be set by libata-core */ return 0; } @@ -813,7 +740,7 @@ static void ahci_start_port(struct ata_port *ap) emp->led_state, 4); if (rc == -EBUSY) - msleep(1); + ata_msleep(ap, 1); else break; } @@ -872,7 +799,7 @@ int ahci_reset_controller(struct ata_host *host) * reset must complete within 1 second, or * the hardware should be considered fried. */ - tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET, + tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET, HOST_RESET, 10, 1000); if (tmp & HOST_RESET) { @@ -1252,7 +1179,7 @@ int ahci_kick_engine(struct ata_port *ap) writel(tmp, port_mmio + PORT_CMD); rc = 0; - tmp = ata_wait_register(port_mmio + PORT_CMD, + tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); if (tmp & PORT_CMD_CLO) rc = -EIO; @@ -1282,8 +1209,8 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, writel(1, port_mmio + PORT_CMD_ISSUE); if (timeout_msec) { - tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, - 1, timeout_msec); + tmp = ata_wait_register(ap, port_mmio + PORT_CMD_ISSUE, + 0x1, 0x1, 1, timeout_msec); if (tmp & 0x1) { ahci_kick_engine(ap); return -EBUSY; @@ -1330,7 +1257,7 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class, } /* spec says at least 5us, but be generous and sleep for 1ms */ - msleep(1); + ata_msleep(ap, 1); /* issue the second D2H Register FIS */ tf.ctl &= ~ATA_SRST; @@ -1660,15 +1587,10 @@ static void ahci_port_intr(struct ata_port *ap) if (unlikely(resetting)) status &= ~PORT_IRQ_BAD_PMP; - /* If we are getting PhyRdy, this is - * just a power state change, we should - * clear out this, plus the PhyRdy/Comm - * Wake bits from Serror - */ - if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) && - (status & PORT_IRQ_PHYRDY)) { + /* if LPM is enabled, PHYRDY doesn't mean anything */ + if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) { status &= ~PORT_IRQ_PHYRDY; - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); + ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG); } if (unlikely(status & PORT_IRQ_ERROR)) { @@ -1830,12 +1752,24 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) { struct ahci_port_priv *pp = qc->ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + u8 *rx_fis = pp->rx_fis; if (pp->fbs_enabled) - d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; + rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; + + /* + * After a successful execution of an ATA PIO data-in command, + * the device doesn't send D2H Reg FIS to update the TF and + * the host should take TF and E_Status from the preceding PIO + * Setup FIS. + */ + if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE && + !(qc->flags & ATA_QCFLAG_FAILED)) { + ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf); + qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15]; + } else + ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf); - ata_tf_from_fis(d2h_fis, &qc->result_tf); return true; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 932eaee50245..7f77c67d267c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -68,7 +68,7 @@ #include <linux/ratelimit.h> #include "libata.h" - +#include "libata-transport.h" /* debounce timing parameters in msecs { interval, duration, timeout } */ const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; @@ -91,8 +91,6 @@ const struct ata_port_operations sata_port_ops = { static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); static unsigned int ata_dev_set_xfermode(struct ata_device *dev); -static unsigned int ata_dev_set_feature(struct ata_device *dev, - u8 enable, u8 feature); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); @@ -1017,7 +1015,7 @@ const char *ata_mode_string(unsigned long xfer_mask) return "<n/a>"; } -static const char *sata_spd_string(unsigned int spd) +const char *sata_spd_string(unsigned int spd) { static const char * const spd_str[] = { "1.5 Gbps", @@ -1030,182 +1028,6 @@ static const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) -{ - struct ata_link *link = dev->link; - struct ata_port *ap = link->ap; - u32 scontrol; - unsigned int err_mask; - int rc; - - /* - * disallow DIPM for drivers which haven't set - * ATA_FLAG_IPM. This is because when DIPM is enabled, - * phy ready will be set in the interrupt status on - * state changes, which will cause some drivers to - * think there are errors - additionally drivers will - * need to disable hot plug. - */ - if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) { - ap->pm_policy = NOT_AVAILABLE; - return -EINVAL; - } - - /* - * For DIPM, we will only enable it for the - * min_power setting. - * - * Why? Because Disks are too stupid to know that - * If the host rejects a request to go to SLUMBER - * they should retry at PARTIAL, and instead it - * just would give up. So, for medium_power to - * work at all, we need to only allow HIPM. - */ - rc = sata_scr_read(link, SCR_CONTROL, &scontrol); - if (rc) - return rc; - - switch (policy) { - case MIN_POWER: - /* no restrictions on IPM transitions */ - scontrol &= ~(0x3 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* enable DIPM */ - if (dev->flags & ATA_DFLAG_DIPM) - err_mask = ata_dev_set_feature(dev, - SETFEATURES_SATA_ENABLE, SATA_DIPM); - break; - case MEDIUM_POWER: - /* allow IPM to PARTIAL */ - scontrol &= ~(0x1 << 8); - scontrol |= (0x2 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* - * we don't have to disable DIPM since IPM flags - * disallow transitions to SLUMBER, which effectively - * disable DIPM if it does not support PARTIAL - */ - break; - case NOT_AVAILABLE: - case MAX_PERFORMANCE: - /* disable all IPM transitions */ - scontrol |= (0x3 << 8); - rc = sata_scr_write(link, SCR_CONTROL, scontrol); - if (rc) - return rc; - - /* - * we don't have to disable DIPM since IPM flags - * disallow all transitions which effectively - * disable DIPM anyway. - */ - break; - } - - /* FIXME: handle SET FEATURES failure */ - (void) err_mask; - - return 0; -} - -/** - * ata_dev_enable_pm - enable SATA interface power management - * @dev: device to enable power management - * @policy: the link power management policy - * - * Enable SATA Interface power management. This will enable - * Device Interface Power Management (DIPM) for min_power - * policy, and then call driver specific callbacks for - * enabling Host Initiated Power management. - * - * Locking: Caller. - * Returns: -EINVAL if IPM is not supported, 0 otherwise. - */ -void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy) -{ - int rc = 0; - struct ata_port *ap = dev->link->ap; - - /* set HIPM first, then DIPM */ - if (ap->ops->enable_pm) - rc = ap->ops->enable_pm(ap, policy); - if (rc) - goto enable_pm_out; - rc = ata_dev_set_dipm(dev, policy); - -enable_pm_out: - if (rc) - ap->pm_policy = MAX_PERFORMANCE; - else - ap->pm_policy = policy; - return /* rc */; /* hopefully we can use 'rc' eventually */ -} - -#ifdef CONFIG_PM -/** - * ata_dev_disable_pm - disable SATA interface power management - * @dev: device to disable power management - * - * Disable SATA Interface power management. This will disable - * Device Interface Power Management (DIPM) without changing - * policy, call driver specific callbacks for disabling Host - * Initiated Power management. - * - * Locking: Caller. - * Returns: void - */ -static void ata_dev_disable_pm(struct ata_device *dev) -{ - struct ata_port *ap = dev->link->ap; - - ata_dev_set_dipm(dev, MAX_PERFORMANCE); - if (ap->ops->disable_pm) - ap->ops->disable_pm(ap); -} -#endif /* CONFIG_PM */ - -void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy) -{ - ap->pm_policy = policy; - ap->link.eh_info.action |= ATA_EH_LPM; - ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY; - ata_port_schedule_eh(ap); -} - -#ifdef CONFIG_PM -static void ata_lpm_enable(struct ata_host *host) -{ - struct ata_link *link; - struct ata_port *ap; - struct ata_device *dev; - int i; - - for (i = 0; i < host->n_ports; i++) { - ap = host->ports[i]; - ata_for_each_link(link, ap, EDGE) { - ata_for_each_dev(dev, link, ALL) - ata_dev_disable_pm(dev); - } - } -} - -static void ata_lpm_disable(struct ata_host *host) -{ - int i; - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - ata_lpm_schedule(ap, ap->pm_policy); - } -} -#endif /* CONFIG_PM */ - /** * ata_dev_classify - determine device type based on ATA-spec signature * @tf: ATA taskfile register set for device to be identified @@ -1806,8 +1628,14 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, } } + if (ap->ops->error_handler) + ata_eh_release(ap); + rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); + if (ap->ops->error_handler) + ata_eh_acquire(ap); + ata_sff_flush_pio_task(ap); if (!rc) { @@ -2564,13 +2392,6 @@ int ata_dev_configure(struct ata_device *dev) if (dev->flags & ATA_DFLAG_LBA48) dev->max_sectors = ATA_MAX_SECTORS_LBA48; - if (!(dev->horkage & ATA_HORKAGE_IPM)) { - if (ata_id_has_hipm(dev->id)) - dev->flags |= ATA_DFLAG_HIPM; - if (ata_id_has_dipm(dev->id)) - dev->flags |= ATA_DFLAG_DIPM; - } - /* Limit PATA drive on SATA cable bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { @@ -2591,13 +2412,6 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); - if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) { - dev->horkage |= ATA_HORKAGE_IPM; - - /* reset link pm_policy for this port to no pm */ - ap->pm_policy = MAX_PERFORMANCE; - } - if (ap->ops->dev_config) ap->ops->dev_config(dev); @@ -3596,7 +3410,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, warned = 1; } - msleep(50); + ata_msleep(link->ap, 50); } } @@ -3617,7 +3431,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) { - msleep(ATA_WAIT_AFTER_RESET); + ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); return ata_wait_ready(link, deadline, check_ready); } @@ -3628,7 +3442,7 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, * @params: timing parameters { interval, duratinon, timeout } in msec * @deadline: deadline jiffies for the operation * -* Make sure SStatus of @link reaches stable state, determined by + * Make sure SStatus of @link reaches stable state, determined by * holding the same value where DET is not 1 for @duration polled * every @interval, before @timeout. Timeout constraints the * beginning of the stable state. Because DET gets stuck at 1 on @@ -3665,7 +3479,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, last_jiffies = jiffies; while (1) { - msleep(interval); + ata_msleep(link->ap, interval); if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3730,7 +3544,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params, * immediately after resuming. Delay 200ms before * debouncing. */ - msleep(200); + ata_msleep(link->ap, 200); /* is SControl restored correctly? */ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol))) @@ -3760,6 +3574,72 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params, } /** + * sata_link_scr_lpm - manipulate SControl IPM and SPM fields + * @link: ATA link to manipulate SControl for + * @policy: LPM policy to configure + * @spm_wakeup: initiate LPM transition to active state + * + * Manipulate the IPM field of the SControl register of @link + * according to @policy. If @policy is ATA_LPM_MAX_POWER and + * @spm_wakeup is %true, the SPM field is manipulated to wake up + * the link. This function also clears PHYRDY_CHG before + * returning. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on succes, -errno otherwise. + */ +int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, + bool spm_wakeup) +{ + struct ata_eh_context *ehc = &link->eh_context; + bool woken_up = false; + u32 scontrol; + int rc; + + rc = sata_scr_read(link, SCR_CONTROL, &scontrol); + if (rc) + return rc; + + switch (policy) { + case ATA_LPM_MAX_POWER: + /* disable all LPM transitions */ + scontrol |= (0x3 << 8); + /* initiate transition to active state */ + if (spm_wakeup) { + scontrol |= (0x4 << 12); + woken_up = true; + } + break; + case ATA_LPM_MED_POWER: + /* allow LPM to PARTIAL */ + scontrol &= ~(0x1 << 8); + scontrol |= (0x2 << 8); + break; + case ATA_LPM_MIN_POWER: + /* no restrictions on LPM transitions */ + scontrol &= ~(0x3 << 8); + break; + default: + WARN_ON(1); + } + + rc = sata_scr_write(link, SCR_CONTROL, scontrol); + if (rc) + return rc; + + /* give the link time to transit out of LPM state */ + if (woken_up) + msleep(10); + + /* clear PHYRDY_CHG from SError */ + ehc->i.serror &= ~SERR_PHYRDY_CHG; + return sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); +} + +/** * ata_std_prereset - prepare for reset * @link: ATA link to be reset * @deadline: deadline jiffies for the operation @@ -3868,7 +3748,7 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 * 10.4.2 says at least 1 ms. */ - msleep(1); + ata_msleep(link->ap, 1); /* bring link back */ rc = sata_link_resume(link, timing, deadline); @@ -4551,6 +4431,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; } + /** * ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES * @dev: Device to which command will be sent @@ -4566,8 +4447,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) * RETURNS: * 0 on success, AC_ERR_* mask otherwise. */ -static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, - u8 feature) +unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable, u8 feature) { struct ata_taskfile tf; unsigned int err_mask; @@ -4943,8 +4823,13 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc) * ata_qc_complete - Complete an active ATA command * @qc: Command to complete * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. + * Indicate to the mid and upper layers that an ATA command has + * completed, with either an ok or not-ok status. + * + * Refrain from calling this function multiple times when + * successfully completing multiple NCQ commands. + * ata_qc_complete_multiple() should be used instead, which will + * properly update IRQ expect state. * * LOCKING: * spin_lock_irqsave(host lock) @@ -5037,6 +4922,10 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * requests normally. ap->qc_active and @qc_active is compared * and commands are completed accordingly. * + * Always use this function when completing multiple NCQ commands + * from IRQ handlers instead of calling ata_qc_complete() + * multiple times to keep IRQ expect status properly in sync. + * * LOCKING: * spin_lock_irqsave(host lock) * @@ -5422,12 +5311,6 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) int rc; /* - * disable link pm on all ports before requesting - * any pm activity - */ - ata_lpm_enable(host); - - /* * On some hardware, device fails to respond after spun down * for suspend. As the device won't be used before being * resumed, we don't need to touch the device. Ask EH to skip @@ -5460,9 +5343,6 @@ void ata_host_resume(struct ata_host *host) ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET, ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); host->dev->power.power_state = PMSG_ON; - - /* reenable link pm */ - ata_lpm_disable(host); } #endif @@ -5517,7 +5397,8 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) int i; /* clear everything except for devices */ - memset(link, 0, offsetof(struct ata_link, device[0])); + memset((void *)link + ATA_LINK_CLEAR_BEGIN, 0, + ATA_LINK_CLEAR_END - ATA_LINK_CLEAR_BEGIN); link->ap = ap; link->pmp = pmp; @@ -5591,7 +5472,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap = kzalloc(sizeof(*ap), GFP_KERNEL); if (!ap) return NULL; - + ap->pflags |= ATA_PFLAG_INITIALIZING; ap->lock = &host->lock; ap->print_id = -1; @@ -5695,6 +5576,7 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports) dev_set_drvdata(dev, host); spin_lock_init(&host->lock); + mutex_init(&host->eh_mutex); host->dev = dev; host->n_ports = max_ports; @@ -5992,6 +5874,7 @@ void ata_host_init(struct ata_host *host, struct device *dev, unsigned long flags, struct ata_port_operations *ops) { spin_lock_init(&host->lock); + mutex_init(&host->eh_mutex); host->dev = dev; host->flags = flags; host->ops = ops; @@ -6022,7 +5905,7 @@ static void async_port_probe(void *data, async_cookie_t cookie) spin_lock_irqsave(ap->lock, flags); ehi->probe_mask |= ATA_ALL_DEVICES; - ehi->action |= ATA_EH_RESET | ATA_EH_LPM; + ehi->action |= ATA_EH_RESET; ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; ap->pflags &= ~ATA_PFLAG_INITIALIZING; @@ -6093,9 +5976,18 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) for (i = 0; i < host->n_ports; i++) host->ports[i]->print_id = ata_print_id++; + + /* Create associated sysfs transport objects */ + for (i = 0; i < host->n_ports; i++) { + rc = ata_tport_add(host->dev,host->ports[i]); + if (rc) { + goto err_tadd; + } + } + rc = ata_scsi_add_hosts(host, sht); if (rc) - return rc; + goto err_tadd; /* associate with ACPI nodes */ ata_acpi_associate(host); @@ -6136,6 +6028,13 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) } return 0; + + err_tadd: + while (--i >= 0) { + ata_tport_delete(host->ports[i]); + } + return rc; + } /** @@ -6226,6 +6125,13 @@ static void ata_port_detach(struct ata_port *ap) cancel_rearming_delayed_work(&ap->hotplug_task); skip_eh: + if (ap->pmp_link) { + int i; + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) + ata_tlink_delete(&ap->pmp_link[i]); + } + ata_tport_delete(ap); + /* remove the associated SCSI host */ scsi_remove_host(ap->scsi_host); } @@ -6542,7 +6448,7 @@ static void __init ata_parse_force_param(void) static int __init ata_init(void) { - int rc = -ENOMEM; + int rc; ata_parse_force_param(); @@ -6552,12 +6458,25 @@ static int __init ata_init(void) return rc; } + libata_transport_init(); + ata_scsi_transport_template = ata_attach_transport(); + if (!ata_scsi_transport_template) { + ata_sff_exit(); + rc = -ENOMEM; + goto err_out; + } + printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); return 0; + +err_out: + return rc; } static void __exit ata_exit(void) { + ata_release_transport(ata_scsi_transport_template); + libata_transport_exit(); ata_sff_exit(); kfree(ata_force_tbl); } @@ -6573,7 +6492,35 @@ int ata_ratelimit(void) } /** + * ata_msleep - ATA EH owner aware msleep + * @ap: ATA port to attribute the sleep to + * @msecs: duration to sleep in milliseconds + * + * Sleeps @msecs. If the current task is owner of @ap's EH, the + * ownership is released before going to sleep and reacquired + * after the sleep is complete. IOW, other ports sharing the + * @ap->host will be allowed to own the EH while this task is + * sleeping. + * + * LOCKING: + * Might sleep. + */ +void ata_msleep(struct ata_port *ap, unsigned int msecs) +{ + bool owns_eh = ap && ap->host->eh_owner == current; + + if (owns_eh) + ata_eh_release(ap); + + msleep(msecs); + + if (owns_eh) + ata_eh_acquire(ap); +} + +/** * ata_wait_register - wait until register value changes + * @ap: ATA port to wait register for, can be NULL * @reg: IO-mapped register * @mask: Mask to apply to read register value * @val: Wait condition @@ -6595,7 +6542,7 @@ int ata_ratelimit(void) * RETURNS: * The final register value. */ -u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, +u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, u32 val, unsigned long interval, unsigned long timeout) { unsigned long deadline; @@ -6610,7 +6557,7 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, deadline = ata_deadline(jiffies, timeout); while ((tmp & mask) == val && time_before(jiffies, deadline)) { - msleep(interval); + ata_msleep(ap, interval); tmp = ioread32(reg); } @@ -6686,6 +6633,7 @@ EXPORT_SYMBOL_GPL(sata_set_spd); EXPORT_SYMBOL_GPL(ata_wait_after_reset); EXPORT_SYMBOL_GPL(sata_link_debounce); EXPORT_SYMBOL_GPL(sata_link_resume); +EXPORT_SYMBOL_GPL(sata_link_scr_lpm); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(sata_link_hardreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); @@ -6693,6 +6641,7 @@ EXPORT_SYMBOL_GPL(ata_std_postreset); EXPORT_SYMBOL_GPL(ata_dev_classify); EXPORT_SYMBOL_GPL(ata_dev_pair); EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_msleep); EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index e48302eae55f..5e590504f3aa 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -57,6 +57,7 @@ enum { /* error flags */ ATA_EFLAG_IS_IO = (1 << 0), ATA_EFLAG_DUBIOUS_XFER = (1 << 1), + ATA_EFLAG_OLD_ER = (1 << 31), /* error categories */ ATA_ECAT_NONE = 0, @@ -396,14 +397,9 @@ static struct ata_ering_entry *ata_ering_top(struct ata_ering *ering) return NULL; } -static void ata_ering_clear(struct ata_ering *ering) -{ - memset(ering, 0, sizeof(*ering)); -} - -static int ata_ering_map(struct ata_ering *ering, - int (*map_fn)(struct ata_ering_entry *, void *), - void *arg) +int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg) { int idx, rc = 0; struct ata_ering_entry *ent; @@ -422,6 +418,17 @@ static int ata_ering_map(struct ata_ering *ering, return rc; } +int ata_ering_clear_cb(struct ata_ering_entry *ent, void *void_arg) +{ + ent->eflags |= ATA_EFLAG_OLD_ER; + return 0; +} + +static void ata_ering_clear(struct ata_ering *ering) +{ + ata_ering_map(ering, ata_ering_clear_cb, NULL); +} + static unsigned int ata_eh_dev_action(struct ata_device *dev) { struct ata_eh_context *ehc = &dev->link->eh_context; @@ -456,6 +463,41 @@ static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev, } /** + * ata_eh_acquire - acquire EH ownership + * @ap: ATA port to acquire EH ownership for + * + * Acquire EH ownership for @ap. This is the basic exclusion + * mechanism for ports sharing a host. Only one port hanging off + * the same host can claim the ownership of EH. + * + * LOCKING: + * EH context. + */ +void ata_eh_acquire(struct ata_port *ap) +{ + mutex_lock(&ap->host->eh_mutex); + WARN_ON_ONCE(ap->host->eh_owner); + ap->host->eh_owner = current; +} + +/** + * ata_eh_release - release EH ownership + * @ap: ATA port to release EH ownership for + * + * Release EH ownership for @ap if the caller. The caller must + * have acquired EH ownership using ata_eh_acquire() previously. + * + * LOCKING: + * EH context. + */ +void ata_eh_release(struct ata_port *ap) +{ + WARN_ON_ONCE(ap->host->eh_owner != current); + ap->host->eh_owner = NULL; + mutex_unlock(&ap->host->eh_mutex); +} + +/** * ata_scsi_timed_out - SCSI layer time out callback * @cmd: timed out SCSI command * @@ -572,19 +614,19 @@ void ata_scsi_error(struct Scsi_Host *host) int nr_timedout = 0; spin_lock_irqsave(ap->lock, flags); - + /* This must occur under the ap->lock as we don't want a polled recovery to race the real interrupt handler - + The lost_interrupt handler checks for any completed but non-notified command and completes much like an IRQ handler. - + We then fall into the error recovery code which will treat this as if normal completion won the race */ if (ap->ops->lost_interrupt) ap->ops->lost_interrupt(ap); - + list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { struct ata_queued_cmd *qc; @@ -628,15 +670,17 @@ void ata_scsi_error(struct Scsi_Host *host) ap->eh_tries = ATA_EH_MAX_TRIES; } else spin_unlock_wait(ap->lock); - + /* If we timed raced normal completion and there is nothing to recover nr_timedout == 0 why exactly are we doing error recovery ? */ - repeat: /* invoke error handler */ if (ap->ops->error_handler) { struct ata_link *link; + /* acquire EH ownership */ + ata_eh_acquire(ap); + repeat: /* kill fast drain timer */ del_timer_sync(&ap->fastdrain_timer); @@ -711,6 +755,7 @@ void ata_scsi_error(struct Scsi_Host *host) host->host_eh_scheduled = 0; spin_unlock_irqrestore(ap->lock, flags); + ata_eh_release(ap); } else { WARN_ON(ata_qc_from_tag(ap, ap->link.active_tag) == NULL); ap->ops->eng_timeout(ap); @@ -772,7 +817,7 @@ void ata_port_wait_eh(struct ata_port *ap) /* make sure SCSI EH is complete */ if (scsi_host_in_recovery(ap->scsi_host)) { - msleep(10); + ata_msleep(ap, 10); goto retry; } } @@ -1573,9 +1618,9 @@ static void ata_eh_analyze_serror(struct ata_link *link) * host links. For disabled PMP links, only N bit is * considered as X bit is left at 1 for link plugging. */ - hotplug_mask = 0; - - if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link)) + if (link->lpm_policy != ATA_LPM_MAX_POWER) + hotplug_mask = 0; /* hotplug doesn't work w/ LPM */ + else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link)) hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG; else hotplug_mask = SERR_PHYRDY_CHG; @@ -1755,7 +1800,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) struct speed_down_verdict_arg *arg = void_arg; int cat; - if (ent->timestamp < arg->since) + if ((ent->eflags & ATA_EFLAG_OLD_ER) || (ent->timestamp < arg->since)) return -1; cat = ata_eh_categorize_error(ent->eflags, ent->err_mask, @@ -2777,8 +2822,9 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_done(link, NULL, ATA_EH_RESET); if (slave) ata_eh_done(slave, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; /* update to completion time */ + ehc->last_reset = jiffies; /* update to completion time */ ehc->i.action |= ATA_EH_REVALIDATE; + link->lpm_policy = ATA_LPM_UNKNOWN; /* reset LPM state */ rc = 0; out: @@ -2810,8 +2856,10 @@ int ata_eh_reset(struct ata_link *link, int classify, "reset failed (errno=%d), retrying in %u secs\n", rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000)); + ata_eh_release(ap); while (delta) delta = schedule_timeout_uninterruptible(delta); + ata_eh_acquire(ap); } if (try == max_tries - 1) { @@ -3204,6 +3252,124 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev) return rc; } +/** + * ata_eh_set_lpm - configure SATA interface power management + * @link: link to configure power management + * @policy: the link power management policy + * @r_failed_dev: out parameter for failed device + * + * Enable SATA Interface power management. This will enable + * Device Interface Power Management (DIPM) for min_power + * policy, and then call driver specific callbacks for + * enabling Host Initiated Power management. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + struct ata_device **r_failed_dev) +{ + struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL; + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL; + unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM; + unsigned int err_mask; + int rc; + + /* if the link or host doesn't do LPM, noop */ + if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm)) + return 0; + + /* + * DIPM is enabled only for MIN_POWER as some devices + * misbehave when the host NACKs transition to SLUMBER. Order + * device and link configurations such that the host always + * allows DIPM requests. + */ + ata_for_each_dev(dev, link, ENABLED) { + bool hipm = ata_id_has_hipm(dev->id); + bool dipm = ata_id_has_dipm(dev->id); + + /* find the first enabled and LPM enabled devices */ + if (!link_dev) + link_dev = dev; + + if (!lpm_dev && (hipm || dipm)) + lpm_dev = dev; + + hints &= ~ATA_LPM_EMPTY; + if (!hipm) + hints &= ~ATA_LPM_HIPM; + + /* disable DIPM before changing link config */ + if (policy != ATA_LPM_MIN_POWER && dipm) { + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_DISABLE, SATA_DIPM); + if (err_mask && err_mask != AC_ERR_DEV) { + ata_dev_printk(dev, KERN_WARNING, + "failed to disable DIPM, Emask 0x%x\n", + err_mask); + rc = -EIO; + goto fail; + } + } + } + + if (ap) { + rc = ap->ops->set_lpm(link, policy, hints); + if (!rc && ap->slave_link) + rc = ap->ops->set_lpm(ap->slave_link, policy, hints); + } else + rc = sata_pmp_set_lpm(link, policy, hints); + + /* + * Attribute link config failure to the first (LPM) enabled + * device on the link. + */ + if (rc) { + if (rc == -EOPNOTSUPP) { + link->flags |= ATA_LFLAG_NO_LPM; + return 0; + } + dev = lpm_dev ? lpm_dev : link_dev; + goto fail; + } + + /* host config updated, enable DIPM if transitioning to MIN_POWER */ + ata_for_each_dev(dev, link, ENABLED) { + if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) { + err_mask = ata_dev_set_feature(dev, + SETFEATURES_SATA_ENABLE, SATA_DIPM); + if (err_mask && err_mask != AC_ERR_DEV) { + ata_dev_printk(dev, KERN_WARNING, + "failed to enable DIPM, Emask 0x%x\n", + err_mask); + rc = -EIO; + goto fail; + } + } + } + + link->lpm_policy = policy; + if (ap && ap->slave_link) + ap->slave_link->lpm_policy = policy; + return 0; + +fail: + /* if no device or only one more chance is left, disable LPM */ + if (!dev || ehc->tries[dev->devno] <= 2) { + ata_link_printk(link, KERN_WARNING, + "disabling LPM on the link\n"); + link->flags |= ATA_LFLAG_NO_LPM; + } + if (r_failed_dev) + *r_failed_dev = dev; + return rc; +} + static int ata_link_nr_enabled(struct ata_link *link) { struct ata_device *dev; @@ -3288,6 +3454,16 @@ static int ata_eh_schedule_probe(struct ata_device *dev) ehc->saved_xfer_mode[dev->devno] = 0; ehc->saved_ncq_enabled &= ~(1 << dev->devno); + /* the link maybe in a deep sleep, wake it up */ + if (link->lpm_policy > ATA_LPM_MAX_POWER) { + if (ata_is_host_link(link)) + link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER, + ATA_LPM_EMPTY); + else + sata_pmp_set_lpm(link, ATA_LPM_MAX_POWER, + ATA_LPM_EMPTY); + } + /* Record and count probe trials on the ering. The specific * error mask used is irrelevant. Because a successful device * detection clears the ering, this count accumulates only if @@ -3389,8 +3565,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, { struct ata_link *link; struct ata_device *dev; - int nr_failed_devs; - int rc; + int rc, nr_fails; unsigned long flags, deadline; DPRINTK("ENTER\n"); @@ -3431,7 +3606,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, retry: rc = 0; - nr_failed_devs = 0; /* if UNLOADING, finish immediately */ if (ap->pflags & ATA_PFLAG_UNLOADING) @@ -3501,8 +3675,10 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (time_before_eq(deadline, now)) break; + ata_eh_release(ap); deadline = wait_for_completion_timeout(&ap->park_req_pending, deadline - now); + ata_eh_acquire(ap); } while (deadline); ata_for_each_link(link, ap, EDGE) { ata_for_each_dev(dev, link, ALL) { @@ -3516,13 +3692,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } /* the rest */ - ata_for_each_link(link, ap, EDGE) { + nr_fails = 0; + ata_for_each_link(link, ap, PMP_FIRST) { struct ata_eh_context *ehc = &link->eh_context; + if (sata_pmp_attached(ap) && ata_is_host_link(link)) + goto config_lpm; + /* revalidate existing devices and attach new ones */ rc = ata_eh_revalidate_and_attach(link, &dev); if (rc) - goto dev_fail; + goto rest_fail; /* if PMP got attached, return, pmp EH will take care of it */ if (link->device->class == ATA_DEV_PMP) { @@ -3534,7 +3714,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (ehc->i.flags & ATA_EHI_SETMODE) { rc = ata_set_mode(link, &dev); if (rc) - goto dev_fail; + goto rest_fail; ehc->i.flags &= ~ATA_EHI_SETMODE; } @@ -3547,7 +3727,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, continue; rc = atapi_eh_clear_ua(dev); if (rc) - goto dev_fail; + goto rest_fail; } } @@ -3557,21 +3737,25 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, continue; rc = ata_eh_maybe_retry_flush(dev); if (rc) - goto dev_fail; + goto rest_fail; } + config_lpm: /* configure link power saving */ - if (ehc->i.action & ATA_EH_LPM) - ata_for_each_dev(dev, link, ALL) - ata_dev_enable_pm(dev, ap->pm_policy); + if (link->lpm_policy != ap->target_lpm_policy) { + rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev); + if (rc) + goto rest_fail; + } /* this link is okay now */ ehc->i.flags = 0; continue; -dev_fail: - nr_failed_devs++; - ata_eh_handle_dev_fail(dev, rc); + rest_fail: + nr_fails++; + if (dev) + ata_eh_handle_dev_fail(dev, rc); if (ap->pflags & ATA_PFLAG_FROZEN) { /* PMP reset requires working host port. @@ -3583,7 +3767,7 @@ dev_fail: } } - if (nr_failed_devs) + if (nr_fails) goto retry; out: diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 224faabd7b7e..3120596d4afc 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -11,6 +11,7 @@ #include <linux/libata.h> #include <linux/slab.h> #include "libata.h" +#include "libata-transport.h" const struct ata_port_operations sata_pmp_port_ops = { .inherits = &sata_port_ops, @@ -185,6 +186,27 @@ int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val) } /** + * sata_pmp_set_lpm - configure LPM for a PMP link + * @link: PMP link to configure LPM for + * @policy: target LPM policy + * @hints: LPM hints + * + * Configure LPM for @link. This function will contain any PMP + * specific workarounds if necessary. + * + * LOCKING: + * EH context. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints) +{ + return sata_link_scr_lpm(link, policy, true); +} + +/** * sata_pmp_read_gscr - read GSCR block of SATA PMP * @dev: PMP device * @gscr: buffer to read GSCR block into @@ -312,10 +334,10 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info) return rc; } -static int sata_pmp_init_links(struct ata_port *ap, int nr_ports) +static int sata_pmp_init_links (struct ata_port *ap, int nr_ports) { struct ata_link *pmp_link = ap->pmp_link; - int i; + int i, err; if (!pmp_link) { pmp_link = kzalloc(sizeof(pmp_link[0]) * SATA_PMP_MAX_PORTS, @@ -327,6 +349,13 @@ static int sata_pmp_init_links(struct ata_port *ap, int nr_ports) ata_link_init(ap, &pmp_link[i], i); ap->pmp_link = pmp_link; + + for (i = 0; i < SATA_PMP_MAX_PORTS; i++) { + err = ata_tlink_add(&pmp_link[i]); + if (err) { + goto err_tlink; + } + } } for (i = 0; i < nr_ports; i++) { @@ -339,6 +368,12 @@ static int sata_pmp_init_links(struct ata_port *ap, int nr_ports) } return 0; + err_tlink: + while (--i >= 0) + ata_tlink_delete(&pmp_link[i]); + kfree(pmp_link); + ap->pmp_link = NULL; + return err; } static void sata_pmp_quirks(struct ata_port *ap) @@ -351,6 +386,9 @@ static void sata_pmp_quirks(struct ata_port *ap) if (vendor == 0x1095 && devid == 0x3726) { /* sil3726 quirks */ ata_for_each_link(link, ap, EDGE) { + /* link reports offline after LPM */ + link->flags |= ATA_LFLAG_NO_LPM; + /* Class code report is unreliable and SRST * times out under certain configurations. */ @@ -366,6 +404,9 @@ static void sata_pmp_quirks(struct ata_port *ap) } else if (vendor == 0x1095 && devid == 0x4723) { /* sil4723 quirks */ ata_for_each_link(link, ap, EDGE) { + /* link reports offline after LPM */ + link->flags |= ATA_LFLAG_NO_LPM; + /* class code report is unreliable */ if (link->pmp < 2) link->flags |= ATA_LFLAG_ASSUME_ATA; @@ -378,6 +419,9 @@ static void sata_pmp_quirks(struct ata_port *ap) } else if (vendor == 0x1095 && devid == 0x4726) { /* sil4726 quirks */ ata_for_each_link(link, ap, EDGE) { + /* link reports offline after LPM */ + link->flags |= ATA_LFLAG_NO_LPM; + /* Class code report is unreliable and SRST * times out under certain configurations. * Config device can be at port 0 or 5 and @@ -938,15 +982,25 @@ static int sata_pmp_eh_recover(struct ata_port *ap) if (rc) goto link_fail; - /* Connection status might have changed while resetting other - * links, check SATA_PMP_GSCR_ERROR before returning. - */ - /* clear SNotification */ rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf); if (rc == 0) sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf); + /* + * If LPM is active on any fan-out port, hotplug wouldn't + * work. Return w/ PHY event notification disabled. + */ + ata_for_each_link(link, ap, EDGE) + if (link->lpm_policy > ATA_LPM_MAX_POWER) + return 0; + + /* + * Connection status might have changed while resetting other + * links, enable notification and check SATA_PMP_GSCR_ERROR + * before returning. + */ + /* enable notification */ if (pmp_dev->flags & ATA_DFLAG_AN) { gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a89172c100f5..d050e073e570 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -51,8 +51,8 @@ #include <asm/unaligned.h> #include "libata.h" +#include "libata-transport.h" -#define SECTOR_SIZE 512 #define ATA_SCSI_RBUF_SIZE 4096 static DEFINE_SPINLOCK(ata_scsi_rbuf_lock); @@ -64,9 +64,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); static struct ata_device *ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); -static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, - unsigned int id, unsigned int lun); - #define RW_RECOVERY_MPAGE 0x1 #define RW_RECOVERY_MPAGE_LEN 12 @@ -106,83 +103,55 @@ static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { 0, 30 /* extended self test time, see 05-359r1 */ }; -/* - * libata transport template. libata doesn't do real transport stuff. - * It just needs the eh_timed_out hook. - */ -static struct scsi_transport_template ata_scsi_transport_template = { - .eh_strategy_handler = ata_scsi_error, - .eh_timed_out = ata_scsi_timed_out, - .user_scan = ata_scsi_user_scan, -}; - - -static const struct { - enum link_pm value; - const char *name; -} link_pm_policy[] = { - { NOT_AVAILABLE, "max_performance" }, - { MIN_POWER, "min_power" }, - { MAX_PERFORMANCE, "max_performance" }, - { MEDIUM_POWER, "medium_power" }, +static const char *ata_lpm_policy_names[] = { + [ATA_LPM_UNKNOWN] = "max_performance", + [ATA_LPM_MAX_POWER] = "max_performance", + [ATA_LPM_MED_POWER] = "medium_power", + [ATA_LPM_MIN_POWER] = "min_power", }; -static const char *ata_scsi_lpm_get(enum link_pm policy) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(link_pm_policy); i++) - if (link_pm_policy[i].value == policy) - return link_pm_policy[i].name; - - return NULL; -} - -static ssize_t ata_scsi_lpm_put(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t ata_scsi_lpm_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) { struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); - enum link_pm policy = 0; - int i; + enum ata_lpm_policy policy; + unsigned long flags; - /* - * we are skipping array location 0 on purpose - this - * is because a value of NOT_AVAILABLE is displayed - * to the user as max_performance, but when the user - * writes "max_performance", they actually want the - * value to match MAX_PERFORMANCE. - */ - for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) { - const int len = strlen(link_pm_policy[i].name); - if (strncmp(link_pm_policy[i].name, buf, len) == 0) { - policy = link_pm_policy[i].value; + /* UNKNOWN is internal state, iterate from MAX_POWER */ + for (policy = ATA_LPM_MAX_POWER; + policy < ARRAY_SIZE(ata_lpm_policy_names); policy++) { + const char *name = ata_lpm_policy_names[policy]; + + if (strncmp(name, buf, strlen(name)) == 0) break; - } } - if (!policy) + if (policy == ARRAY_SIZE(ata_lpm_policy_names)) return -EINVAL; - ata_lpm_schedule(ap, policy); + spin_lock_irqsave(ap->lock, flags); + ap->target_lpm_policy = policy; + ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); + return count; } -static ssize_t -ata_scsi_lpm_show(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t ata_scsi_lpm_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = class_to_shost(dev); struct ata_port *ap = ata_shost_to_port(shost); - const char *policy = - ata_scsi_lpm_get(ap->pm_policy); - if (!policy) + if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names)) return -EINVAL; - return snprintf(buf, 23, "%s\n", policy); + return snprintf(buf, PAGE_SIZE, "%s\n", + ata_lpm_policy_names[ap->target_lpm_policy]); } DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR, - ata_scsi_lpm_show, ata_scsi_lpm_put); + ata_scsi_lpm_show, ata_scsi_lpm_store); EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy); static ssize_t ata_scsi_park_show(struct device *device, @@ -516,7 +485,7 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) memset(scsi_cmd, 0, sizeof(scsi_cmd)); if (args[3]) { - argsize = SECTOR_SIZE * args[3]; + argsize = ATA_SECT_SIZE * args[3]; argbuf = kmalloc(argsize, GFP_KERNEL); if (argbuf == NULL) { rc = -ENOMEM; @@ -1150,8 +1119,9 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN); } else { /* ATA devices must be sector aligned */ + sdev->sector_size = ata_id_logical_sector_size(dev->id); blk_queue_update_dma_alignment(sdev->request_queue, - ATA_SECT_SIZE - 1); + sdev->sector_size - 1); sdev->manage_start_stop = 1; } @@ -1166,6 +1136,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); } + dev->sdev = sdev; return 0; } @@ -1696,7 +1667,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) goto nothing_to_do; qc->flags |= ATA_QCFLAG_IO; - qc->nbytes = n_block * ATA_SECT_SIZE; + qc->nbytes = n_block * scmd->device->sector_size; rc = ata_build_rw_tf(&qc->tf, qc->dev, block, n_block, tf_flags, qc->tag); @@ -2001,6 +1972,7 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) 0x89, /* page 0x89, ata info page */ 0xb0, /* page 0xb0, block limits page */ 0xb1, /* page 0xb1, block device characteristics page */ + 0xb2, /* page 0xb2, thin provisioning page */ }; rbuf[3] = sizeof(pages); /* number of supported VPD pages */ @@ -2123,7 +2095,7 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf) { - u32 min_io_sectors; + u16 min_io_sectors; rbuf[1] = 0xb0; rbuf[3] = 0x3c; /* required VPD size with unmap support */ @@ -2135,10 +2107,7 @@ static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf) * logical than physical sector size we need to figure out what the * latter is. */ - if (ata_id_has_large_logical_sectors(args->id)) - min_io_sectors = ata_id_logical_per_physical_sectors(args->id); - else - min_io_sectors = 1; + min_io_sectors = 1 << ata_id_log2_per_physical_sector(args->id); put_unaligned_be16(min_io_sectors, &rbuf[6]); /* @@ -2172,6 +2141,16 @@ static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) return 0; } +static unsigned int ata_scsiop_inq_b2(struct ata_scsi_args *args, u8 *rbuf) +{ + /* SCSI Thin Provisioning VPD page: SBC-3 rev 22 or later */ + rbuf[1] = 0xb2; + rbuf[3] = 0x4; + rbuf[5] = 1 << 6; /* TPWS */ + + return 0; +} + /** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. @@ -2397,21 +2376,13 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) { struct ata_device *dev = args->dev; u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */ - u8 log_per_phys = 0; - u16 lowest_aligned = 0; - u16 word_106 = dev->id[106]; - u16 word_209 = dev->id[209]; - - if ((word_106 & 0xc000) == 0x4000) { - /* Number and offset of logical sectors per physical sector */ - if (word_106 & (1 << 13)) - log_per_phys = word_106 & 0xf; - if ((word_209 & 0xc000) == 0x4000) { - u16 first = dev->id[209] & 0x3fff; - if (first > 0) - lowest_aligned = (1 << log_per_phys) - first; - } - } + u32 sector_size; /* physical sector size in bytes */ + u8 log2_per_phys; + u16 lowest_aligned; + + sector_size = ata_id_logical_sector_size(dev->id); + log2_per_phys = ata_id_log2_per_physical_sector(dev->id); + lowest_aligned = ata_id_logical_sector_offset(dev->id, log2_per_phys); VPRINTK("ENTER\n"); @@ -2426,8 +2397,10 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[3] = last_lba; /* sector size */ - rbuf[6] = ATA_SECT_SIZE >> 8; - rbuf[7] = ATA_SECT_SIZE & 0xff; + rbuf[4] = sector_size >> (8 * 3); + rbuf[5] = sector_size >> (8 * 2); + rbuf[6] = sector_size >> (8 * 1); + rbuf[7] = sector_size; } else { /* sector count, 64-bit */ rbuf[0] = last_lba >> (8 * 7); @@ -2440,11 +2413,13 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[7] = last_lba; /* sector size */ - rbuf[10] = ATA_SECT_SIZE >> 8; - rbuf[11] = ATA_SECT_SIZE & 0xff; + rbuf[ 8] = sector_size >> (8 * 3); + rbuf[ 9] = sector_size >> (8 * 2); + rbuf[10] = sector_size >> (8 * 1); + rbuf[11] = sector_size; rbuf[12] = 0; - rbuf[13] = log_per_phys; + rbuf[13] = log2_per_phys; rbuf[14] = (lowest_aligned >> 8) & 0x3f; rbuf[15] = lowest_aligned; @@ -2888,9 +2863,8 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) tf->device = dev->devno ? tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; - /* READ/WRITE LONG use a non-standard sect_size */ - qc->sect_size = ATA_SECT_SIZE; switch (tf->command) { + /* READ/WRITE LONG use a non-standard sect_size */ case ATA_CMD_READ_LONG: case ATA_CMD_READ_LONG_ONCE: case ATA_CMD_WRITE_LONG: @@ -2898,6 +2872,45 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1) goto invalid_fld; qc->sect_size = scsi_bufflen(scmd); + break; + + /* commands using reported Logical Block size (e.g. 512 or 4K) */ + case ATA_CMD_CFA_WRITE_NE: + case ATA_CMD_CFA_TRANS_SECT: + case ATA_CMD_CFA_WRITE_MULT_NE: + /* XXX: case ATA_CMD_CFA_WRITE_SECTORS_WITHOUT_ERASE: */ + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_READ_QUEUED: + /* XXX: case ATA_CMD_READ_QUEUED_EXT: */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_READ_MULTI: + case ATA_CMD_READ_MULTI_EXT: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_READ_STREAM_DMA_EXT: + case ATA_CMD_READ_STREAM_EXT: + case ATA_CMD_VERIFY: + case ATA_CMD_VERIFY_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_WRITE_FUA_EXT: + case ATA_CMD_WRITE_QUEUED: + case ATA_CMD_WRITE_QUEUED_FUA_EXT: + case ATA_CMD_FPDMA_WRITE: + case ATA_CMD_WRITE_MULTI: + case ATA_CMD_WRITE_MULTI_EXT: + case ATA_CMD_WRITE_MULTI_FUA_EXT: + case ATA_CMD_PIO_WRITE: + case ATA_CMD_PIO_WRITE_EXT: + case ATA_CMD_WRITE_STREAM_DMA_EXT: + case ATA_CMD_WRITE_STREAM_EXT: + qc->sect_size = scmd->device->sector_size; + break; + + /* Everything else uses 512 byte "sectors" */ + default: + qc->sect_size = ATA_SECT_SIZE; } /* @@ -3250,6 +3263,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, case 0xb1: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); break; + case 0xb2: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2); + break; default: ata_scsi_invalid_field(cmd, done); break; @@ -3334,7 +3350,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) *(struct ata_port **)&shost->hostdata[0] = ap; ap->scsi_host = shost; - shost->transportt = &ata_scsi_transport_template; + shost->transportt = ata_scsi_transport_template; shost->unique_id = ap->print_id; shost->max_id = 16; shost->max_lun = 1; @@ -3393,6 +3409,8 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync) if (!IS_ERR(sdev)) { dev->sdev = sdev; scsi_device_put(sdev); + } else { + dev->sdev = NULL; } } } @@ -3616,8 +3634,8 @@ void ata_scsi_hotplug(struct work_struct *work) * RETURNS: * Zero. */ -static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, - unsigned int id, unsigned int lun) +int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun) { struct ata_port *ap = ata_shost_to_port(shost); unsigned long flags; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index e30c537cce32..14d18bf81255 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -222,7 +222,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, timeout = ata_deadline(timer_start, tmout_pat); while (status != 0xff && (status & ATA_BUSY) && time_before(jiffies, timeout)) { - msleep(50); + ata_msleep(ap, 50); status = ata_sff_busy_wait(ap, ATA_BUSY, 3); } @@ -234,7 +234,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, timeout = ata_deadline(timer_start, tmout); while (status != 0xff && (status & ATA_BUSY) && time_before(jiffies, timeout)) { - msleep(50); + ata_msleep(ap, 50); status = ap->ops->sff_check_status(ap); } @@ -360,7 +360,7 @@ static void ata_dev_select(struct ata_port *ap, unsigned int device, if (wait) { if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI) - msleep(150); + ata_msleep(ap, 150); ata_wait_idle(ap); } } @@ -1356,7 +1356,7 @@ fsm_start: */ status = ata_sff_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { - msleep(2); + ata_msleep(ap, 2); status = ata_sff_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { ata_sff_queue_pio_task(link, ATA_SHORT_PAUSE); @@ -1937,7 +1937,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask, unsigned int dev1 = devmask & (1 << 1); int rc, ret = 0; - msleep(ATA_WAIT_AFTER_RESET); + ata_msleep(ap, ATA_WAIT_AFTER_RESET); /* always check readiness of the master device */ rc = ata_sff_wait_ready(link, deadline); @@ -1966,7 +1966,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask, lbal = ioread8(ioaddr->lbal_addr); if ((nsect == 1) && (lbal == 1)) break; - msleep(50); /* give drive a breather */ + ata_msleep(ap, 50); /* give drive a breather */ } rc = ata_sff_wait_ready(link, deadline); @@ -3342,7 +3342,7 @@ int __init ata_sff_init(void) return 0; } -void __exit ata_sff_exit(void) +void ata_sff_exit(void) { destroy_workqueue(ata_sff_wq); } diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c new file mode 100644 index 000000000000..ce9dc6207f37 --- /dev/null +++ b/drivers/ata/libata-transport.c @@ -0,0 +1,774 @@ +/* + * Copyright 2008 ioogle, Inc. All rights reserved. + * Released under GPL v2. + * + * Libata transport class. + * + * The ATA transport class contains common code to deal with ATA HBAs, + * an approximated representation of ATA topologies in the driver model, + * and various sysfs attributes to expose these topologies and management + * interfaces to user-space. + * + * There are 3 objects defined in in this class: + * - ata_port + * - ata_link + * - ata_device + * Each port has a link object. Each link can have up to two devices for PATA + * and generally one for SATA. + * If there is SATA port multiplier [PMP], 15 additional ata_link object are + * created. + * + * These objects are created when the ata host is initialized and when a PMP is + * found. They are removed only when the HBA is removed, cleaned before the + * error handler runs. + */ + + +#include <linux/kernel.h> +#include <linux/blkdev.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <scsi/scsi_transport.h> +#include <linux/libata.h> +#include <linux/hdreg.h> +#include <linux/uaccess.h> + +#include "libata.h" +#include "libata-transport.h" + +#define ATA_PORT_ATTRS 2 +#define ATA_LINK_ATTRS 3 +#define ATA_DEV_ATTRS 9 + +struct scsi_transport_template; +struct scsi_transport_template *ata_scsi_transport_template; + +struct ata_internal { + struct scsi_transport_template t; + + struct device_attribute private_port_attrs[ATA_PORT_ATTRS]; + struct device_attribute private_link_attrs[ATA_LINK_ATTRS]; + struct device_attribute private_dev_attrs[ATA_DEV_ATTRS]; + + struct transport_container link_attr_cont; + struct transport_container dev_attr_cont; + + /* + * The array of null terminated pointers to attributes + * needed by scsi_sysfs.c + */ + struct device_attribute *link_attrs[ATA_LINK_ATTRS + 1]; + struct device_attribute *port_attrs[ATA_PORT_ATTRS + 1]; + struct device_attribute *dev_attrs[ATA_DEV_ATTRS + 1]; +}; +#define to_ata_internal(tmpl) container_of(tmpl, struct ata_internal, t) + + +#define tdev_to_device(d) \ + container_of((d), struct ata_device, tdev) +#define transport_class_to_dev(dev) \ + tdev_to_device((dev)->parent) + +#define tdev_to_link(d) \ + container_of((d), struct ata_link, tdev) +#define transport_class_to_link(dev) \ + tdev_to_link((dev)->parent) + +#define tdev_to_port(d) \ + container_of((d), struct ata_port, tdev) +#define transport_class_to_port(dev) \ + tdev_to_port((dev)->parent) + + +/* Device objects are always created whit link objects */ +static int ata_tdev_add(struct ata_device *dev); +static void ata_tdev_delete(struct ata_device *dev); + + +/* + * Hack to allow attributes of the same name in different objects. + */ +#define ATA_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \ + struct device_attribute device_attr_##_prefix##_##_name = \ + __ATTR(_name,_mode,_show,_store) + +#define ata_bitfield_name_match(title, table) \ +static ssize_t \ +get_ata_##title##_names(u32 table_key, char *buf) \ +{ \ + char *prefix = ""; \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(table); i++) { \ + if (table[i].value & table_key) { \ + len += sprintf(buf + len, "%s%s", \ + prefix, table[i].name); \ + prefix = ", "; \ + } \ + } \ + len += sprintf(buf + len, "\n"); \ + return len; \ +} + +#define ata_bitfield_name_search(title, table) \ +static ssize_t \ +get_ata_##title##_names(u32 table_key, char *buf) \ +{ \ + ssize_t len = 0; \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(table); i++) { \ + if (table[i].value == table_key) { \ + len += sprintf(buf + len, "%s", \ + table[i].name); \ + break; \ + } \ + } \ + len += sprintf(buf + len, "\n"); \ + return len; \ +} + +static struct { + u32 value; + char *name; +} ata_class_names[] = { + { ATA_DEV_UNKNOWN, "unknown" }, + { ATA_DEV_ATA, "ata" }, + { ATA_DEV_ATA_UNSUP, "ata" }, + { ATA_DEV_ATAPI, "atapi" }, + { ATA_DEV_ATAPI_UNSUP, "atapi" }, + { ATA_DEV_PMP, "pmp" }, + { ATA_DEV_PMP_UNSUP, "pmp" }, + { ATA_DEV_SEMB, "semb" }, + { ATA_DEV_SEMB_UNSUP, "semb" }, + { ATA_DEV_NONE, "none" } +}; +ata_bitfield_name_search(class, ata_class_names) + + +static struct { + u32 value; + char *name; +} ata_err_names[] = { + { AC_ERR_DEV, "DeviceError" }, + { AC_ERR_HSM, "HostStateMachineError" }, + { AC_ERR_TIMEOUT, "Timeout" }, + { AC_ERR_MEDIA, "MediaError" }, + { AC_ERR_ATA_BUS, "BusError" }, + { AC_ERR_HOST_BUS, "HostBusError" }, + { AC_ERR_SYSTEM, "SystemError" }, + { AC_ERR_INVALID, "InvalidArg" }, + { AC_ERR_OTHER, "Unknown" }, + { AC_ERR_NODEV_HINT, "NoDeviceHint" }, + { AC_ERR_NCQ, "NCQError" } +}; +ata_bitfield_name_match(err, ata_err_names) + +static struct { + u32 value; + char *name; +} ata_xfer_names[] = { + { XFER_UDMA_7, "XFER_UDMA_7" }, + { XFER_UDMA_6, "XFER_UDMA_6" }, + { XFER_UDMA_5, "XFER_UDMA_5" }, + { XFER_UDMA_4, "XFER_UDMA_4" }, + { XFER_UDMA_3, "XFER_UDMA_3" }, + { XFER_UDMA_2, "XFER_UDMA_2" }, + { XFER_UDMA_1, "XFER_UDMA_1" }, + { XFER_UDMA_0, "XFER_UDMA_0" }, + { XFER_MW_DMA_4, "XFER_MW_DMA_4" }, + { XFER_MW_DMA_3, "XFER_MW_DMA_3" }, + { XFER_MW_DMA_2, "XFER_MW_DMA_2" }, + { XFER_MW_DMA_1, "XFER_MW_DMA_1" }, + { XFER_MW_DMA_0, "XFER_MW_DMA_0" }, + { XFER_SW_DMA_2, "XFER_SW_DMA_2" }, + { XFER_SW_DMA_1, "XFER_SW_DMA_1" }, + { XFER_SW_DMA_0, "XFER_SW_DMA_0" }, + { XFER_PIO_6, "XFER_PIO_6" }, + { XFER_PIO_5, "XFER_PIO_5" }, + { XFER_PIO_4, "XFER_PIO_4" }, + { XFER_PIO_3, "XFER_PIO_3" }, + { XFER_PIO_2, "XFER_PIO_2" }, + { XFER_PIO_1, "XFER_PIO_1" }, + { XFER_PIO_0, "XFER_PIO_0" }, + { XFER_PIO_SLOW, "XFER_PIO_SLOW" } +}; +ata_bitfield_name_match(xfer,ata_xfer_names) + +/* + * ATA Port attributes + */ +#define ata_port_show_simple(field, name, format_string, cast) \ +static ssize_t \ +show_ata_port_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_port *ap = transport_class_to_port(dev); \ + \ + return snprintf(buf, 20, format_string, cast ap->field); \ +} + +#define ata_port_simple_attr(field, name, format_string, type) \ + ata_port_show_simple(field, name, format_string, (type)) \ +static DEVICE_ATTR(name, S_IRUGO, show_ata_port_##name, NULL) + +ata_port_simple_attr(nr_pmp_links, nr_pmp_links, "%d\n", int); +ata_port_simple_attr(stats.idle_irq, idle_irq, "%ld\n", unsigned long); + +static DECLARE_TRANSPORT_CLASS(ata_port_class, + "ata_port", NULL, NULL, NULL); + +static void ata_tport_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_port -- check if a struct device represents a ATA port + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA Port, %0 else + */ +int ata_is_port(const struct device *dev) +{ + return dev->release == ata_tport_release; +} + +static int ata_tport_match(struct attribute_container *cont, + struct device *dev) +{ + if (!ata_is_port(dev)) + return 0; + return &ata_scsi_transport_template->host_attrs.ac == cont; +} + +/** + * ata_tport_delete -- remove ATA PORT + * @port: ATA PORT to remove + * + * Removes the specified ATA PORT. Remove the associated link as well. + */ +void ata_tport_delete(struct ata_port *ap) +{ + struct device *dev = &ap->tdev; + + ata_tlink_delete(&ap->link); + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(dev); +} + +/** ata_tport_add - initialize a transport ATA port structure + * + * @parent: parent device + * @ap: existing ata_port structure + * + * Initialize a ATA port structure for sysfs. It will be added to the device + * tree below the device specified by @parent which could be a PCI device. + * + * Returns %0 on success + */ +int ata_tport_add(struct device *parent, + struct ata_port *ap) +{ + int error; + struct device *dev = &ap->tdev; + + device_initialize(dev); + + dev->parent = get_device(parent); + dev->release = ata_tport_release; + dev_set_name(dev, "ata%d", ap->print_id); + transport_setup_device(dev); + error = device_add(dev); + if (error) { + goto tport_err; + } + + transport_add_device(dev); + transport_configure_device(dev); + + error = ata_tlink_add(&ap->link); + if (error) { + goto tport_link_err; + } + return 0; + + tport_link_err: + transport_remove_device(dev); + device_del(dev); + + tport_err: + transport_destroy_device(dev); + put_device(dev); + return error; +} + + +/* + * ATA link attributes + */ + + +#define ata_link_show_linkspeed(field) \ +static ssize_t \ +show_ata_link_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_link *link = transport_class_to_link(dev); \ + \ + return sprintf(buf,"%s\n", sata_spd_string(fls(link->field))); \ +} + +#define ata_link_linkspeed_attr(field) \ + ata_link_show_linkspeed(field) \ +static DEVICE_ATTR(field, S_IRUGO, show_ata_link_##field, NULL) + +ata_link_linkspeed_attr(hw_sata_spd_limit); +ata_link_linkspeed_attr(sata_spd_limit); +ata_link_linkspeed_attr(sata_spd); + + +static DECLARE_TRANSPORT_CLASS(ata_link_class, + "ata_link", NULL, NULL, NULL); + +static void ata_tlink_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_link -- check if a struct device represents a ATA link + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA link, %0 else + */ +int ata_is_link(const struct device *dev) +{ + return dev->release == ata_tlink_release; +} + +static int ata_tlink_match(struct attribute_container *cont, + struct device *dev) +{ + struct ata_internal* i = to_ata_internal(ata_scsi_transport_template); + if (!ata_is_link(dev)) + return 0; + return &i->link_attr_cont.ac == cont; +} + +/** + * ata_tlink_delete -- remove ATA LINK + * @port: ATA LINK to remove + * + * Removes the specified ATA LINK. remove associated ATA device(s) as well. + */ +void ata_tlink_delete(struct ata_link *link) +{ + struct device *dev = &link->tdev; + struct ata_device *ata_dev; + + ata_for_each_dev(ata_dev, link, ALL) { + ata_tdev_delete(ata_dev); + } + + transport_remove_device(dev); + device_del(dev); + transport_destroy_device(dev); + put_device(dev); +} + +/** + * ata_tlink_add -- initialize a transport ATA link structure + * @link: allocated ata_link structure. + * + * Initialize an ATA LINK structure for sysfs. It will be added in the + * device tree below the ATA PORT it belongs to. + * + * Returns %0 on success + */ +int ata_tlink_add(struct ata_link *link) +{ + struct device *dev = &link->tdev; + struct ata_port *ap = link->ap; + struct ata_device *ata_dev; + int error; + + device_initialize(dev); + dev->parent = get_device(&ap->tdev); + dev->release = ata_tlink_release; + if (ata_is_host_link(link)) + dev_set_name(dev, "link%d", ap->print_id); + else + dev_set_name(dev, "link%d.%d", ap->print_id, link->pmp); + + transport_setup_device(dev); + + error = device_add(dev); + if (error) { + goto tlink_err; + } + + transport_add_device(dev); + transport_configure_device(dev); + + ata_for_each_dev(ata_dev, link, ALL) { + error = ata_tdev_add(ata_dev); + if (error) { + goto tlink_dev_err; + } + } + return 0; + tlink_dev_err: + while (--ata_dev >= link->device) { + ata_tdev_delete(ata_dev); + } + transport_remove_device(dev); + device_del(dev); + tlink_err: + transport_destroy_device(dev); + put_device(dev); + return error; +} + +/* + * ATA device attributes + */ + +#define ata_dev_show_class(title, field) \ +static ssize_t \ +show_ata_dev_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_device *ata_dev = transport_class_to_dev(dev); \ + \ + return get_ata_##title##_names(ata_dev->field, buf); \ +} + +#define ata_dev_attr(title, field) \ + ata_dev_show_class(title, field) \ +static DEVICE_ATTR(field, S_IRUGO, show_ata_dev_##field, NULL) + +ata_dev_attr(class, class); +ata_dev_attr(xfer, pio_mode); +ata_dev_attr(xfer, dma_mode); +ata_dev_attr(xfer, xfer_mode); + + +#define ata_dev_show_simple(field, format_string, cast) \ +static ssize_t \ +show_ata_dev_##field(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct ata_device *ata_dev = transport_class_to_dev(dev); \ + \ + return snprintf(buf, 20, format_string, cast ata_dev->field); \ +} + +#define ata_dev_simple_attr(field, format_string, type) \ + ata_dev_show_simple(field, format_string, (type)) \ +static DEVICE_ATTR(field, S_IRUGO, \ + show_ata_dev_##field, NULL) + +ata_dev_simple_attr(spdn_cnt, "%d\n", int); + +struct ata_show_ering_arg { + char* buf; + int written; +}; + +static int ata_show_ering(struct ata_ering_entry *ent, void *void_arg) +{ + struct ata_show_ering_arg* arg = void_arg; + struct timespec time; + + jiffies_to_timespec(ent->timestamp,&time); + arg->written += sprintf(arg->buf + arg->written, + "[%5lu.%06lu]", + time.tv_sec, time.tv_nsec); + arg->written += get_ata_err_names(ent->err_mask, + arg->buf + arg->written); + return 0; +} + +static ssize_t +show_ata_dev_ering(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + struct ata_show_ering_arg arg = { buf, 0 }; + + ata_ering_map(&ata_dev->ering, ata_show_ering, &arg); + return arg.written; +} + + +static DEVICE_ATTR(ering, S_IRUGO, show_ata_dev_ering, NULL); + +static ssize_t +show_ata_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + int written = 0, i = 0; + + if (ata_dev->class == ATA_DEV_PMP) + return 0; + for(i=0;i<ATA_ID_WORDS;i++) { + written += snprintf(buf+written, 20, "%04x%c", + ata_dev->id[i], + ((i+1) & 7) ? ' ' : '\n'); + } + return written; +} + +static DEVICE_ATTR(id, S_IRUGO, show_ata_dev_id, NULL); + +static ssize_t +show_ata_dev_gscr(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ata_device *ata_dev = transport_class_to_dev(dev); + int written = 0, i = 0; + + if (ata_dev->class != ATA_DEV_PMP) + return 0; + for(i=0;i<SATA_PMP_GSCR_DWORDS;i++) { + written += snprintf(buf+written, 20, "%08x%c", + ata_dev->gscr[i], + ((i+1) & 3) ? ' ' : '\n'); + } + if (SATA_PMP_GSCR_DWORDS & 3) + buf[written-1] = '\n'; + return written; +} + +static DEVICE_ATTR(gscr, S_IRUGO, show_ata_dev_gscr, NULL); + +static DECLARE_TRANSPORT_CLASS(ata_dev_class, + "ata_device", NULL, NULL, NULL); + +static void ata_tdev_release(struct device *dev) +{ + put_device(dev->parent); +} + +/** + * ata_is_ata_dev -- check if a struct device represents a ATA device + * @dev: device to check + * + * Returns: + * %1 if the device represents a ATA device, %0 else + */ +int ata_is_ata_dev(const struct device *dev) +{ + return dev->release == ata_tdev_release; +} + +static int ata_tdev_match(struct attribute_container *cont, + struct device *dev) +{ + struct ata_internal* i = to_ata_internal(ata_scsi_transport_template); + if (!ata_is_ata_dev(dev)) + return 0; + return &i->dev_attr_cont.ac == cont; +} + +/** + * ata_tdev_free -- free a ATA LINK + * @dev: ATA PHY to free + * + * Frees the specified ATA PHY. + * + * Note: + * This function must only be called on a PHY that has not + * successfully been added using ata_tdev_add(). + */ +static void ata_tdev_free(struct ata_device *dev) +{ + transport_destroy_device(&dev->tdev); + put_device(&dev->tdev); +} + +/** + * ata_tdev_delete -- remove ATA device + * @port: ATA PORT to remove + * + * Removes the specified ATA device. + */ +static void ata_tdev_delete(struct ata_device *ata_dev) +{ + struct device *dev = &ata_dev->tdev; + + transport_remove_device(dev); + device_del(dev); + ata_tdev_free(ata_dev); +} + + +/** + * ata_tdev_add -- initialize a transport ATA device structure. + * @ata_dev: ata_dev structure. + * + * Initialize an ATA device structure for sysfs. It will be added in the + * device tree below the ATA LINK device it belongs to. + * + * Returns %0 on success + */ +static int ata_tdev_add(struct ata_device *ata_dev) +{ + struct device *dev = &ata_dev->tdev; + struct ata_link *link = ata_dev->link; + struct ata_port *ap = link->ap; + int error; + + device_initialize(dev); + dev->parent = get_device(&link->tdev); + dev->release = ata_tdev_release; + if (ata_is_host_link(link)) + dev_set_name(dev, "dev%d.%d", ap->print_id,ata_dev->devno); + else + dev_set_name(dev, "dev%d.%d.0", ap->print_id, link->pmp); + + transport_setup_device(dev); + error = device_add(dev); + if (error) { + ata_tdev_free(ata_dev); + return error; + } + + transport_add_device(dev); + transport_configure_device(dev); + return 0; +} + + +/* + * Setup / Teardown code + */ + +#define SETUP_TEMPLATE(attrb, field, perm, test) \ + i->private_##attrb[count] = dev_attr_##field; \ + i->private_##attrb[count].attr.mode = perm; \ + i->attrb[count] = &i->private_##attrb[count]; \ + if (test) \ + count++ + +#define SETUP_LINK_ATTRIBUTE(field) \ + SETUP_TEMPLATE(link_attrs, field, S_IRUGO, 1) + +#define SETUP_PORT_ATTRIBUTE(field) \ + SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1) + +#define SETUP_DEV_ATTRIBUTE(field) \ + SETUP_TEMPLATE(dev_attrs, field, S_IRUGO, 1) + +/** + * ata_attach_transport -- instantiate ATA transport template + */ +struct scsi_transport_template *ata_attach_transport(void) +{ + struct ata_internal *i; + int count; + + i = kzalloc(sizeof(struct ata_internal), GFP_KERNEL); + if (!i) + return NULL; + + i->t.eh_strategy_handler = ata_scsi_error; + i->t.eh_timed_out = ata_scsi_timed_out; + i->t.user_scan = ata_scsi_user_scan; + + i->t.host_attrs.ac.attrs = &i->port_attrs[0]; + i->t.host_attrs.ac.class = &ata_port_class.class; + i->t.host_attrs.ac.match = ata_tport_match; + transport_container_register(&i->t.host_attrs); + + i->link_attr_cont.ac.class = &ata_link_class.class; + i->link_attr_cont.ac.attrs = &i->link_attrs[0]; + i->link_attr_cont.ac.match = ata_tlink_match; + transport_container_register(&i->link_attr_cont); + + i->dev_attr_cont.ac.class = &ata_dev_class.class; + i->dev_attr_cont.ac.attrs = &i->dev_attrs[0]; + i->dev_attr_cont.ac.match = ata_tdev_match; + transport_container_register(&i->dev_attr_cont); + + count = 0; + SETUP_PORT_ATTRIBUTE(nr_pmp_links); + SETUP_PORT_ATTRIBUTE(idle_irq); + BUG_ON(count > ATA_PORT_ATTRS); + i->port_attrs[count] = NULL; + + count = 0; + SETUP_LINK_ATTRIBUTE(hw_sata_spd_limit); + SETUP_LINK_ATTRIBUTE(sata_spd_limit); + SETUP_LINK_ATTRIBUTE(sata_spd); + BUG_ON(count > ATA_LINK_ATTRS); + i->link_attrs[count] = NULL; + + count = 0; + SETUP_DEV_ATTRIBUTE(class); + SETUP_DEV_ATTRIBUTE(pio_mode); + SETUP_DEV_ATTRIBUTE(dma_mode); + SETUP_DEV_ATTRIBUTE(xfer_mode); + SETUP_DEV_ATTRIBUTE(spdn_cnt); + SETUP_DEV_ATTRIBUTE(ering); + SETUP_DEV_ATTRIBUTE(id); + SETUP_DEV_ATTRIBUTE(gscr); + BUG_ON(count > ATA_DEV_ATTRS); + i->dev_attrs[count] = NULL; + + return &i->t; +} + +/** + * ata_release_transport -- release ATA transport template instance + * @t: transport template instance + */ +void ata_release_transport(struct scsi_transport_template *t) +{ + struct ata_internal *i = to_ata_internal(t); + + transport_container_unregister(&i->t.host_attrs); + transport_container_unregister(&i->link_attr_cont); + transport_container_unregister(&i->dev_attr_cont); + + kfree(i); +} + +__init int libata_transport_init(void) +{ + int error; + + error = transport_class_register(&ata_link_class); + if (error) + goto out_unregister_transport; + error = transport_class_register(&ata_port_class); + if (error) + goto out_unregister_link; + error = transport_class_register(&ata_dev_class); + if (error) + goto out_unregister_port; + return 0; + + out_unregister_port: + transport_class_unregister(&ata_port_class); + out_unregister_link: + transport_class_unregister(&ata_link_class); + out_unregister_transport: + return error; + +} + +void __exit libata_transport_exit(void) +{ + transport_class_unregister(&ata_link_class); + transport_class_unregister(&ata_port_class); + transport_class_unregister(&ata_dev_class); +} diff --git a/drivers/ata/libata-transport.h b/drivers/ata/libata-transport.h new file mode 100644 index 000000000000..2820cf864f11 --- /dev/null +++ b/drivers/ata/libata-transport.h @@ -0,0 +1,18 @@ +#ifndef _LIBATA_TRANSPORT_H +#define _LIBATA_TRANSPORT_H + + +extern struct scsi_transport_template *ata_scsi_transport_template; + +int ata_tlink_add(struct ata_link *link); +void ata_tlink_delete(struct ata_link *link); + +int ata_tport_add(struct device *parent, struct ata_port *ap); +void ata_tport_delete(struct ata_port *ap); + +struct scsi_transport_template *ata_attach_transport(void); +void ata_release_transport(struct scsi_transport_template *t); + +__init int libata_transport_init(void); +void __exit libata_transport_exit(void); +#endif diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 9ce1ecc63e39..a9be110dbf51 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -86,6 +86,8 @@ extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); +extern unsigned int ata_dev_set_feature(struct ata_device *dev, + u8 enable, u8 feature); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); @@ -100,8 +102,7 @@ extern int sata_link_init_spd(struct ata_link *link); extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct ata_port *ata_port_alloc(struct ata_host *host); -extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy); -extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); +extern const char *sata_spd_string(unsigned int spd); /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI @@ -137,10 +138,15 @@ extern void ata_scsi_hotplug(struct work_struct *work); extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); extern void ata_scsi_dev_rescan(struct work_struct *work); extern int ata_bus_probe(struct ata_port *ap); +extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun); + /* libata-eh.c */ extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); extern void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd); +extern void ata_eh_acquire(struct ata_port *ap); +extern void ata_eh_release(struct ata_port *ap); extern enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); @@ -164,11 +170,16 @@ extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ata_postreset_fn_t postreset, struct ata_link **r_failed_disk); extern void ata_eh_finish(struct ata_port *ap); +extern int ata_ering_map(struct ata_ering *ering, + int (*map_fn)(struct ata_ering_entry *, void *), + void *arg); /* libata-pmp.c */ #ifdef CONFIG_SATA_PMP extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val); extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val); +extern int sata_pmp_set_lpm(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); extern int sata_pmp_attach(struct ata_device *dev); #else /* CONFIG_SATA_PMP */ static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val) @@ -181,6 +192,12 @@ static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val) return -EINVAL; } +static inline int sata_pmp_set_lpm(struct ata_link *link, + enum ata_lpm_policy policy, unsigned hints) +{ + return -EINVAL; +} + static inline int sata_pmp_attach(struct ata_device *dev) { return -EINVAL; diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 9cae65de750e..ec2c777fcdb0 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -826,7 +826,7 @@ static void bfin_dev_select(struct ata_port *ap, unsigned int device) * @ctl: value to write */ -static u8 bfin_set_devctl(struct ata_port *ap, u8 ctl) +static void bfin_set_devctl(struct ata_port *ap, u8 ctl) { void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; write_atapi_register(base, ATA_REG_CTRL, ctl); @@ -1046,7 +1046,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) dev1 = 0; break; } - msleep(50); /* give drive a breather */ + ata_msleep(ap, 50); /* give drive a breather */ } if (dev1) ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); @@ -1087,7 +1087,7 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap, * * Old drivers/ide uses the 2mS rule and then waits for ready */ - msleep(150); + ata_msleep(ap, 150); /* Before we perform post reset processing we want to see if * the bus shows 0xFF because the odd clown forgets the D7 diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index e5f289f59ca3..549d28dbf90d 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -161,6 +161,17 @@ static int cmd640_port_start(struct ata_port *ap) return 0; } +static bool cmd640_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int irq_reg = ap->port_no ? ARTIM23 : CFR; + u8 irq_stat, irq_mask = ap->port_no ? 0x10 : 0x04; + + pci_read_config_byte(pdev, irq_reg, &irq_stat); + + return irq_stat & irq_mask; +} + static struct scsi_host_template cmd640_sht = { ATA_PIO_SHT(DRV_NAME), }; @@ -169,6 +180,7 @@ static struct ata_port_operations cmd640_port_ops = { .inherits = &ata_sff_port_ops, /* In theory xfer_noirq is not needed once we kill the prefetcher */ .sff_data_xfer = ata_sff_data_xfer_noirq, + .sff_irq_check = cmd640_sff_irq_check, .qc_issue = cmd640_qc_issue, .cable_detect = ata_cable_40wire, .set_piomode = cmd640_set_piomode, diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index c39f213e1bbc..c2ed5868dda6 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -44,6 +44,27 @@ static void pdc202xx_exec_command(struct ata_port *ap, ndelay(400); } +static bool pdc202xx_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long master = pci_resource_start(pdev, 4); + u8 sc1d = inb(master + 0x1d); + + if (ap->port_no) { + /* + * bit 7: error, bit 6: interrupting, + * bit 5: FIFO full, bit 4: FIFO empty + */ + return sc1d & 0x40; + } else { + /* + * bit 3: error, bit 2: interrupting, + * bit 1: FIFO full, bit 0: FIFO empty + */ + return sc1d & 0x04; + } +} + /** * pdc202xx_configure_piomode - set chip PIO timing * @ap: ATA interface @@ -282,6 +303,7 @@ static struct ata_port_operations pdc2024x_port_ops = { .set_dmamode = pdc202xx_set_dmamode, .sff_exec_command = pdc202xx_exec_command, + .sff_irq_check = pdc202xx_irq_check, }; static struct ata_port_operations pdc2026x_port_ops = { @@ -297,6 +319,7 @@ static struct ata_port_operations pdc2026x_port_ops = { .port_start = pdc2026x_port_start, .sff_exec_command = pdc202xx_exec_command, + .sff_irq_check = pdc202xx_irq_check, }; static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c index 6f9cfb24b751..8a51d673e5b2 100644 --- a/drivers/ata/pata_samsung_cf.c +++ b/drivers/ata/pata_samsung_cf.c @@ -322,7 +322,7 @@ static int pata_s3c_wait_after_reset(struct ata_link *link, { int rc; - msleep(ATA_WAIT_AFTER_RESET); + ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); /* always check readiness of the master device */ rc = ata_sff_wait_ready(link, deadline); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index fe36966f7e34..093715c3273a 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -530,7 +530,7 @@ static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask, * * Old drivers/ide uses the 2mS rule and then waits for ready. */ - msleep(150); + ata_msleep(ap, 150); /* always check readiness of the master device */ rc = ata_sff_wait_ready(link, deadline); @@ -559,7 +559,7 @@ static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask, lbal = in_be32(ioaddr->lbal_addr); if ((nsect == 1) && (lbal == 1)) break; - msleep(50); /* give drive a breather */ + ata_msleep(ap, 50); /* give drive a breather */ } rc = ata_sff_wait_ready(link, deadline); diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index d3190d7ec304..00eefbd84b33 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -202,14 +202,25 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev) * LOCKING: * spin_lock_irqsave(host lock) */ -void sil680_sff_exec_command(struct ata_port *ap, - const struct ata_taskfile *tf) +static void sil680_sff_exec_command(struct ata_port *ap, + const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); iowrite8(tf->command, ap->ioaddr.command_addr); ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); } +static bool sil680_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + unsigned long addr = sil680_selreg(ap, 1); + u8 val; + + pci_read_config_byte(pdev, addr, &val); + + return val & 0x08; +} + static struct scsi_host_template sil680_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -218,6 +229,7 @@ static struct scsi_host_template sil680_sht = { static struct ata_port_operations sil680_port_ops = { .inherits = &ata_bmdma32_port_ops, .sff_exec_command = sil680_sff_exec_command, + .sff_irq_check = sil680_sff_irq_check, .cable_detect = sil680_cable_detect, .set_piomode = sil680_set_piomode, .set_dmamode = sil680_set_dmamode, diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 98548f640c8e..7f5d020ed56c 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -227,6 +227,16 @@ static int sl82c105_qc_defer(struct ata_queued_cmd *qc) return 0; } +static bool sl82c105_sff_irq_check(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 val, mask = ap->port_no ? CTRL_IDE_IRQB : CTRL_IDE_IRQA; + + pci_read_config_dword(pdev, 0x40, &val); + + return val & mask; +} + static struct scsi_host_template sl82c105_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -239,6 +249,7 @@ static struct ata_port_operations sl82c105_port_ops = { .cable_detect = ata_cable_40wire, .set_piomode = sl82c105_set_piomode, .prereset = sl82c105_pre_reset, + .sff_irq_check = sl82c105_sff_irq_check, }; /** diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 7325f77480dc..b0214d00d50b 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -678,7 +678,7 @@ static void sata_fsl_port_stop(struct ata_port *ap) iowrite32(temp, hcr_base + HCONTROL); /* Poll for controller to go offline - should happen immediately */ - ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1); + ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1); ap->private_data = NULL; dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, @@ -729,7 +729,8 @@ try_offline_again: iowrite32(temp, hcr_base + HCONTROL); /* Poll for controller to go offline */ - temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 500); + temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, ONLINE, + 1, 500); if (temp & ONLINE) { ata_port_printk(ap, KERN_ERR, @@ -752,7 +753,7 @@ try_offline_again: /* * PHY reset should remain asserted for atleast 1ms */ - msleep(1); + ata_msleep(ap, 1); /* * Now, bring the host controller online again, this can take time @@ -766,7 +767,7 @@ try_offline_again: temp |= HCONTROL_PMP_ATTACHED; iowrite32(temp, hcr_base + HCONTROL); - temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500); + temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, 0, 1, 500); if (!(temp & ONLINE)) { ata_port_printk(ap, KERN_ERR, @@ -784,7 +785,7 @@ try_offline_again: * presence */ - temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500); + temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0, 1, 500); if ((!(temp & 0x10)) || ata_link_offline(link)) { ata_port_printk(ap, KERN_WARNING, "No Device OR PHYRDY change,Hstatus = 0x%x\n", @@ -797,7 +798,7 @@ try_offline_again: * Wait for the first D2H from device,i.e,signature update notification */ start_jiffies = jiffies; - temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0x10, + temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0x10, 500, jiffies_to_msecs(deadline - start_jiffies)); if ((temp & 0xFF) != 0x18) { @@ -880,7 +881,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); - temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000); + temp = ata_wait_register(ap, CQ + hcr_base, 0x1, 0x1, 1, 5000); if (temp & 0x1) { ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n"); @@ -896,7 +897,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, goto err; } - msleep(1); + ata_msleep(ap, 1); /* * SATA device enters reset state after receving a Control register @@ -915,7 +916,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, if (pmp != SATA_PMP_CTRL_PORT) iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); - msleep(150); /* ?? */ + ata_msleep(ap, 150); /* ?? */ /* * The above command would have signalled an interrupt on command @@ -1137,17 +1138,13 @@ static void sata_fsl_host_intr(struct ata_port *ap) ioread32(hcr_base + CE)); for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { - if (done_mask & (1 << i)) { - qc = ata_qc_from_tag(ap, i); - if (qc) { - ata_qc_complete(qc); - } + if (done_mask & (1 << i)) DPRINTK ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", i, ioread32(hcr_base + CC), ioread32(hcr_base + CA)); - } } + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); return; } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) { diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index a36149ebf4a2..83a44471b189 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -614,7 +614,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, writew(IDMA_CTL_RST_ATA, idma_ctl); readw(idma_ctl); /* flush */ - msleep(1); + ata_msleep(ap, 1); writew(0, idma_ctl); rc = sata_link_resume(link, timing, deadline); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a9fd9709c262..bf74a36d3cc3 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2743,18 +2743,11 @@ static void mv_err_intr(struct ata_port *ap) } } -static void mv_process_crpb_response(struct ata_port *ap, +static bool mv_process_crpb_response(struct ata_port *ap, struct mv_crpb *response, unsigned int tag, int ncq_enabled) { u8 ata_status; u16 edma_status = le16_to_cpu(response->flags); - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); - - if (unlikely(!qc)) { - ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n", - __func__, tag); - return; - } /* * edma_status from a response queue entry: @@ -2768,13 +2761,14 @@ static void mv_process_crpb_response(struct ata_port *ap, * Error will be seen/handled by * mv_err_intr(). So do nothing at all here. */ - return; + return false; } } ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT; if (!ac_err_mask(ata_status)) - ata_qc_complete(qc); + return true; /* else: leave it for mv_err_intr() */ + return false; } static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp) @@ -2783,6 +2777,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp struct mv_host_priv *hpriv = ap->host->private_data; u32 in_index; bool work_done = false; + u32 done_mask = 0; int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN); /* Get the hardware queue position index */ @@ -2803,15 +2798,19 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp /* Gen II/IIE: get command tag from CRPB entry */ tag = le16_to_cpu(response->id) & 0x1f; } - mv_process_crpb_response(ap, response, tag, ncq_enabled); + if (mv_process_crpb_response(ap, response, tag, ncq_enabled)) + done_mask |= 1 << tag; work_done = true; } - /* Update the software queue position index in hardware */ - if (work_done) + if (work_done) { + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + + /* Update the software queue position index in hardware */ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT), port_mmio + EDMA_RSP_Q_OUT_PTR); + } } static void mv_port_intr(struct ata_port *ap, u32 port_cause) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index cb89ef8d99d9..7254e255fd78 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -873,29 +873,11 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) ata_port_freeze(ap); else ata_port_abort(ap); - return 1; + return -1; } - if (likely(flags & NV_CPB_RESP_DONE)) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num); - VPRINTK("CPB flags done, flags=0x%x\n", flags); - if (likely(qc)) { - DPRINTK("Completing qc from tag %d\n", cpb_num); - ata_qc_complete(qc); - } else { - struct ata_eh_info *ehi = &ap->link.eh_info; - /* Notifier bits set without a command may indicate the drive - is misbehaving. Raise host state machine violation on this - condition. */ - ata_port_printk(ap, KERN_ERR, - "notifier for tag %d with no cmd?\n", - cpb_num); - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_RESET; - ata_port_freeze(ap); - return 1; - } - } + if (likely(flags & NV_CPB_RESP_DONE)) + return 1; return 0; } @@ -1018,6 +1000,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) NV_ADMA_STAT_CPBERR | NV_ADMA_STAT_CMD_COMPLETE)) { u32 check_commands = notifier_clears[i]; + u32 done_mask = 0; int pos, rc; if (status & NV_ADMA_STAT_CPBERR) { @@ -1034,10 +1017,13 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) pos--; rc = nv_adma_check_cpb(ap, pos, notifier_error & (1 << pos)); - if (unlikely(rc)) + if (rc > 0) + done_mask |= 1 << pos; + else if (unlikely(rc < 0)) check_commands = 0; check_commands &= ~(1 << pos); } + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); } } @@ -2132,7 +2118,6 @@ static int nv_swncq_sdbfis(struct ata_port *ap) struct ata_eh_info *ehi = &ap->link.eh_info; u32 sactive; u32 done_mask; - int i; u8 host_stat; u8 lack_dhfis = 0; @@ -2152,27 +2137,11 @@ static int nv_swncq_sdbfis(struct ata_port *ap) sactive = readl(pp->sactive_block); done_mask = pp->qc_active ^ sactive; - if (unlikely(done_mask & sactive)) { - ata_ehi_clear_desc(ehi); - ata_ehi_push_desc(ehi, "illegal SWNCQ:qc_active transition" - "(%08x->%08x)", pp->qc_active, sactive); - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_RESET; - return -EINVAL; - } - for (i = 0; i < ATA_MAX_QUEUE; i++) { - if (!(done_mask & (1 << i))) - continue; - - qc = ata_qc_from_tag(ap, i); - if (qc) { - ata_qc_complete(qc); - pp->qc_active &= ~(1 << i); - pp->dhfis_bits &= ~(1 << i); - pp->dmafis_bits &= ~(1 << i); - pp->sdbfis_bits |= (1 << i); - } - } + pp->qc_active &= ~done_mask; + pp->dhfis_bits &= ~done_mask; + pp->dmafis_bits &= ~done_mask; + pp->sdbfis_bits |= done_mask; + ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); if (!ap->qc_active) { DPRINTK("over\n"); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index be7726d7686d..af41c6fd1254 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -589,9 +589,9 @@ static int sil24_init_port(struct ata_port *ap) sil24_clear_pmp(ap); writel(PORT_CS_INIT, port + PORT_CTRL_STAT); - ata_wait_register(port + PORT_CTRL_STAT, + ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_INIT, PORT_CS_INIT, 10, 100); - tmp = ata_wait_register(port + PORT_CTRL_STAT, + tmp = ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0, 10, 100); if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) { @@ -631,7 +631,7 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp, writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4); irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; - irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, 0x0, + irq_stat = ata_wait_register(ap, port + PORT_IRQ_STAT, irq_mask, 0x0, 10, timeout_msec); writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */ @@ -719,9 +719,9 @@ static int sil24_hardreset(struct ata_link *link, unsigned int *class, "state, performing PORT_RST\n"); writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT); - msleep(10); + ata_msleep(ap, 10); writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_RDY, 0, + ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0, 10, 5000); /* restore port configuration */ @@ -740,7 +740,7 @@ static int sil24_hardreset(struct ata_link *link, unsigned int *class, tout_msec = 5000; writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); - tmp = ata_wait_register(port + PORT_CTRL_STAT, + tmp = ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec); @@ -1253,7 +1253,7 @@ static void sil24_init_controller(struct ata_host *host) tmp = readl(port + PORT_CTRL_STAT); if (tmp & PORT_CS_PORT_RST) { writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - tmp = ata_wait_register(port + PORT_CTRL_STAT, + tmp = ata_wait_register(NULL, port + PORT_CTRL_STAT, PORT_CS_PORT_RST, PORT_CS_PORT_RST, 10, 100); if (tmp & PORT_CS_PORT_RST) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 4730c42a5ee5..c21589986c69 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -349,7 +349,7 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline) /* wait for phy to become ready, if necessary */ do { - msleep(200); + ata_msleep(link->ap, 200); svia_scr_read(link, SCR_STATUS, &sstatus); if ((sstatus & 0xf) != 1) break; diff --git a/include/linux/ata.h b/include/linux/ata.h index fe6e681a9d74..0c4929fa34d3 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -89,6 +89,7 @@ enum { ATA_ID_SPG = 98, ATA_ID_LBA_CAPACITY_2 = 100, ATA_ID_SECTOR_SIZE = 106, + ATA_ID_LOGICAL_SECTOR_SIZE = 117, /* and 118 */ ATA_ID_LAST_LUN = 126, ATA_ID_DLF = 128, ATA_ID_CSFO = 129, @@ -640,16 +641,49 @@ static inline int ata_id_flush_ext_enabled(const u16 *id) return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400; } -static inline int ata_id_has_large_logical_sectors(const u16 *id) +static inline u32 ata_id_logical_sector_size(const u16 *id) { - if ((id[ATA_ID_SECTOR_SIZE] & 0xc000) != 0x4000) - return 0; - return id[ATA_ID_SECTOR_SIZE] & (1 << 13); + /* T13/1699-D Revision 6a, Sep 6, 2008. Page 128. + * IDENTIFY DEVICE data, word 117-118. + * 0xd000 ignores bit 13 (logical:physical > 1) + */ + if ((id[ATA_ID_SECTOR_SIZE] & 0xd000) == 0x5000) + return (((id[ATA_ID_LOGICAL_SECTOR_SIZE+1] << 16) + + id[ATA_ID_LOGICAL_SECTOR_SIZE]) * sizeof(u16)) ; + return ATA_SECT_SIZE; +} + +static inline u8 ata_id_log2_per_physical_sector(const u16 *id) +{ + /* T13/1699-D Revision 6a, Sep 6, 2008. Page 128. + * IDENTIFY DEVICE data, word 106. + * 0xe000 ignores bit 12 (logical sector > 512 bytes) + */ + if ((id[ATA_ID_SECTOR_SIZE] & 0xe000) == 0x6000) + return (id[ATA_ID_SECTOR_SIZE] & 0xf); + return 0; } -static inline u16 ata_id_logical_per_physical_sectors(const u16 *id) +/* Offset of logical sectors relative to physical sectors. + * + * If device has more than one logical sector per physical sector + * (aka 512 byte emulation), vendors might offset the "sector 0" address + * so sector 63 is "naturally aligned" - e.g. FAT partition table. + * This avoids Read/Mod/Write penalties when using FAT partition table + * and updating "well aligned" (FS perspective) physical sectors on every + * transaction. + */ +static inline u16 ata_id_logical_sector_offset(const u16 *id, + u8 log2_per_phys) { - return 1 << (id[ATA_ID_SECTOR_SIZE] & 0xf); + u16 word_209 = id[209]; + + if ((log2_per_phys > 1) && (word_209 & 0xc000) == 0x4000) { + u16 first = word_209 & 0x3fff; + if (first > 0) + return (1 << log2_per_phys) - first; + } + return 0; } static inline int ata_id_has_lba48(const u16 *id) diff --git a/include/linux/libata.h b/include/linux/libata.h index 45fb2967b66d..15b77b8dc7e1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -37,6 +37,7 @@ #include <scsi/scsi_host.h> #include <linux/acpi.h> #include <linux/cdrom.h> +#include <linux/sched.h> /* * Define if arch has non-standard setup. This is a _PCI_ standard @@ -172,6 +173,7 @@ enum { ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */ ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */ ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ + ATA_LFLAG_NO_LPM = (1 << 8), /* disable LPM on this link */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -196,7 +198,7 @@ enum { ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */ ATA_FLAG_AN = (1 << 18), /* controller supports AN */ ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */ - ATA_FLAG_IPM = (1 << 20), /* driver can handle IPM */ + ATA_FLAG_LPM = (1 << 20), /* driver can handle LPM */ ATA_FLAG_EM = (1 << 21), /* driver supports enclosure * management */ ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity @@ -324,12 +326,11 @@ enum { ATA_EH_HARDRESET = (1 << 2), /* meaningful only in ->prereset */ ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, ATA_EH_ENABLE_LINK = (1 << 3), - ATA_EH_LPM = (1 << 4), /* link power management action */ ATA_EH_PARK = (1 << 5), /* unload heads and stop I/O */ ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_PARK, ATA_EH_ALL_ACTIONS = ATA_EH_REVALIDATE | ATA_EH_RESET | - ATA_EH_ENABLE_LINK | ATA_EH_LPM, + ATA_EH_ENABLE_LINK, /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ @@ -341,7 +342,7 @@ enum { ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */ ATA_EHI_PRINTINFO = (1 << 18), /* print configuration info */ ATA_EHI_SETMODE = (1 << 19), /* configure transfer mode */ - ATA_EHI_POST_SETMODE = (1 << 20), /* revaildating after setmode */ + ATA_EHI_POST_SETMODE = (1 << 20), /* revalidating after setmode */ ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET, @@ -377,7 +378,6 @@ enum { ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */ ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */ ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */ - ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */ ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */ ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ @@ -464,6 +464,22 @@ enum ata_completion_errors { AC_ERR_NCQ = (1 << 10), /* marker for offending NCQ qc */ }; +/* + * Link power management policy: If you alter this, you also need to + * alter libata-scsi.c (for the ascii descriptions) + */ +enum ata_lpm_policy { + ATA_LPM_UNKNOWN, + ATA_LPM_MAX_POWER, + ATA_LPM_MED_POWER, + ATA_LPM_MIN_POWER, +}; + +enum ata_lpm_hints { + ATA_LPM_EMPTY = (1 << 0), /* port empty/probing */ + ATA_LPM_HIPM = (1 << 1), /* may use HIPM */ +}; + /* forward declarations */ struct scsi_device; struct ata_port_operations; @@ -478,16 +494,6 @@ typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes, unsigned long deadline); typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes); -/* - * host pm policy: If you alter this, you also need to alter libata-scsi.c - * (for the ascii descriptions) - */ -enum link_pm { - NOT_AVAILABLE, - MIN_POWER, - MAX_PERFORMANCE, - MEDIUM_POWER, -}; extern struct device_attribute dev_attr_link_power_management_policy; extern struct device_attribute dev_attr_unload_heads; extern struct device_attribute dev_attr_em_message_type; @@ -530,6 +536,10 @@ struct ata_host { void *private_data; struct ata_port_operations *ops; unsigned long flags; + + struct mutex eh_mutex; + struct task_struct *eh_owner; + #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; #endif @@ -560,13 +570,13 @@ struct ata_queued_cmd { unsigned int extrabytes; unsigned int curbytes; - struct scatterlist *cursg; - unsigned int cursg_ofs; - struct scatterlist sgent; struct scatterlist *sg; + struct scatterlist *cursg; + unsigned int cursg_ofs; + unsigned int err_mask; struct ata_taskfile result_tf; ata_qc_cb_t complete_fn; @@ -604,6 +614,7 @@ struct ata_device { union acpi_object *gtf_cache; unsigned int gtf_filter; #endif + struct device tdev; /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ u64 n_sectors; /* size of device, if ATA */ u64 n_native_sectors; /* native size, if ATA */ @@ -690,6 +701,7 @@ struct ata_link { struct ata_port *ap; int pmp; /* port multiplier port # */ + struct device tdev; unsigned int active_tag; /* active tag on this link */ u32 sactive; /* active NCQ commands */ @@ -699,6 +711,7 @@ struct ata_link { unsigned int hw_sata_spd_limit; unsigned int sata_spd_limit; unsigned int sata_spd; /* current SATA PHY speed */ + enum ata_lpm_policy lpm_policy; /* record runtime error info, protected by host_set lock */ struct ata_eh_info eh_info; @@ -707,6 +720,8 @@ struct ata_link { struct ata_device device[ATA_MAX_DEVICES]; }; +#define ATA_LINK_CLEAR_BEGIN offsetof(struct ata_link, active_tag) +#define ATA_LINK_CLEAR_END offsetof(struct ata_link, device[0]) struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ @@ -752,6 +767,7 @@ struct ata_port { struct ata_port_stats stats; struct ata_host *host; struct device *dev; + struct device tdev; struct mutex scsi_scan_mutex; struct delayed_work hotplug_task; @@ -767,7 +783,7 @@ struct ata_port { pm_message_t pm_mesg; int *pm_result; - enum link_pm pm_policy; + enum ata_lpm_policy target_lpm_policy; struct timer_list fastdrain_timer; unsigned long fastdrain_cnt; @@ -833,8 +849,8 @@ struct ata_port_operations { int (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val); void (*pmp_attach)(struct ata_port *ap); void (*pmp_detach)(struct ata_port *ap); - int (*enable_pm)(struct ata_port *ap, enum link_pm policy); - void (*disable_pm)(struct ata_port *ap); + int (*set_lpm)(struct ata_link *link, enum ata_lpm_policy policy, + unsigned hints); /* * Start, stop, suspend and resume @@ -946,6 +962,8 @@ extern int sata_link_debounce(struct ata_link *link, const unsigned long *params, unsigned long deadline); extern int sata_link_resume(struct ata_link *link, const unsigned long *params, unsigned long deadline); +extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, + bool spm_wakeup); extern int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, unsigned long deadline, bool *online, int (*check_ready)(struct ata_link *)); @@ -991,8 +1009,9 @@ extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); extern void ata_host_resume(struct ata_host *host); #endif extern int ata_ratelimit(void); -extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval, unsigned long timeout); +extern void ata_msleep(struct ata_port *ap, unsigned int msecs); +extern u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask, + u32 val, unsigned long interval, unsigned long timeout); extern int atapi_cmd_type(u8 opcode); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); |