summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/atmel
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/atmel')
-rw-r--r--drivers/mtd/nand/atmel/nand-controller.c15
-rw-r--r--drivers/mtd/nand/atmel/pmecc.c21
2 files changed, 19 insertions, 17 deletions
diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index d922a88e407f..ceec21bd30c4 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -1201,7 +1201,7 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
* tRC < 30ns implies EDO mode. This controller does not support this
* mode.
*/
- if (conf->timings.sdr.tRC_min < 30)
+ if (conf->timings.sdr.tRC_min < 30000)
return -ENOTSUPP;
atmel_smc_cs_conf_init(smcconf);
@@ -1364,7 +1364,18 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
ret = atmel_smc_cs_conf_set_timing(smcconf,
ATMEL_HSMC_TIMINGS_TADL_SHIFT,
ncycles);
- if (ret)
+ /*
+ * Version 4 of the ONFI spec mandates that tADL be at least 400
+ * nanoseconds, but, depending on the master clock rate, 400 ns may not
+ * fit in the tADL field of the SMC reg. We need to relax the check and
+ * accept the -ERANGE return code.
+ *
+ * Note that previous versions of the ONFI spec had a lower tADL_min
+ * (100 or 200 ns). It's not clear why this timing constraint got
+ * increased but it seems most NANDs are fine with values lower than
+ * 400ns, so we should be safe.
+ */
+ if (ret && ret != -ERANGE)
return ret;
ncycles = DIV_ROUND_UP(conf->timings.sdr.tAR_min, mckperiodps);
diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c
index 55a8ee5306ea..8c210a5776bc 100644
--- a/drivers/mtd/nand/atmel/pmecc.c
+++ b/drivers/mtd/nand/atmel/pmecc.c
@@ -945,6 +945,7 @@ struct atmel_pmecc *devm_atmel_pmecc_get(struct device *userdev)
*/
struct platform_device *pdev = to_platform_device(userdev);
const struct atmel_pmecc_caps *caps;
+ const struct of_device_id *match;
/* No PMECC engine available. */
if (!of_property_read_bool(userdev->of_node,
@@ -953,21 +954,11 @@ struct atmel_pmecc *devm_atmel_pmecc_get(struct device *userdev)
caps = &at91sam9g45_caps;
- /*
- * Try to find the NFC subnode and extract the associated caps
- * from there.
- */
- np = of_find_compatible_node(userdev->of_node, NULL,
- "atmel,sama5d3-nfc");
- if (np) {
- const struct of_device_id *match;
-
- match = of_match_node(atmel_pmecc_legacy_match, np);
- if (match && match->data)
- caps = match->data;
-
- of_node_put(np);
- }
+ /* Find the caps associated to the NAND dev node. */
+ match = of_match_node(atmel_pmecc_legacy_match,
+ userdev->of_node);
+ if (match && match->data)
+ caps = match->data;
pmecc = atmel_pmecc_create(pdev, caps, 1, 2);
}