summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800.h
Commit message (Expand)AuthorAge
* rt2x00: move under ralink vendor directoryKalle Valo2015-11-18
* rt2800: fix assigning same WCID for different stationsStanislaw Gruszka2015-06-15
* rt2800: correct BBP1_TX_POWER_CTRL maskStanislaw Gruszka2014-09-26
* rt2x00: support Ralink 5362.Canek Peláez Valdés2014-08-28
* rt2x00: Fix FSF address in file headersJeff Kirsher2013-12-11
* rt2x00: cleanup indentation in rt2800.hGabor Juhos2013-10-14
* rt2800: add support for radio chip RF3070Stanislaw Gruszka2013-10-03
* rt2x00: rt2800lib: don't hardcode beacon offsetsGabor Juhos2013-08-26
* rt2x00: rt2800lib: use a MCU command for frequency adjustment on USB devicesGabor Juhos2013-08-22
* rt2x00: rt2800: rename HW_BEACON_OFFSET macroGabor Juhos2013-08-22
* rt2x00: rt2800usb: use correct [RT]XWI size for RT3593Gabor Juhos2013-07-22
* rt2x00: rt2800lib: add channel configuration for RF3053Gabor Juhos2013-07-22
* rt2x00: rt2800lib: fix LNA_A[12] gain values for RT3593Gabor Juhos2013-07-22
* rt2x00: rt2800lib: fix default TX power values for RT3593Gabor Juhos2013-07-22
* rt2x00: rt2800lib: add rt2800_txpower_to_dev helperGabor Juhos2013-07-22
* rt2x00: rt2800lib: add TX power configuration for RT3593Gabor Juhos2013-07-22
* rt2x00: rt2800lib: add RFCSR register initialization for RT3593Gabor Juhos2013-07-22
* rt2x00: rt2800lib: add MAC register initialization for RT3593Gabor Juhos2013-07-22
* rt2x00: rt2800lib: add EEPROM map for the RT3593 chipsetGabor Juhos2013-07-22
* rt2x00: rt2800lib: introduce rt2800_eeprom_word_index helperGabor Juhos2013-07-22
* rt2x00: rt2800lib: introduce rt2800_eeprom_word enumGabor Juhos2013-07-22
* rt2x00: rt2800: increase EEPROM_SIZE to 512 bytesGabor Juhos2013-06-27
* rt2x00: rt2800: unify [RT]XWI_SIZE definesGabor Juhos2013-06-24
* rt2800: 5592: TXWI & RXWI descriptors sizeStanislaw Gruszka2013-03-18
* rt2800: add write_with_rx_chain functionStanislaw Gruszka2013-03-18
* rt2800: 5592: add iq calibrationStanislaw Gruszka2013-03-18
* rt2800: 5592: BBP registers initializationStanislaw Gruszka2013-03-18
* rt2800: 5592: channel config stubStanislaw Gruszka2013-03-18
* rt2800: 5592: add channels tableStanislaw Gruszka2013-03-18
* rt2800: 5592: early definesStanislaw Gruszka2013-03-18
* rt2x00: rt2800lib: introduce RFCSR3_VCOCAL_ENGabor Juhos2012-12-03
* rt2x00: rt2800lib: remove trailing semicolons from RFCSR3_* definesGabor Juhos2012-12-03
* rt2x00: add MediaTek/RaLink Rt3352 WiSoCDaniel Golle2012-09-11
* rt2x00: Unify GPIO register field namingsGertjan van Wingerde2012-09-07
* rt2x00: Align GPIO register definitions with the datasheets.Gertjan van Wingerde2012-09-07
* rt2x00 : RT3290 chip support v4Woody Hung2012-06-20
* rt2x00:Add RT5392 chipset supportZero.Lin2012-06-06
* rt2x00: Add support for RT5360 based PCI devices.villacis@palosanto.com2012-06-05
* rt2x00: Add debugfs access for rfcsr registerAnisse Astier2012-05-08
* rt2800: add chipset revision RT5390R supportAnisse Astier2012-04-23
* rt2800: debugfs register access: BBP is 256 bytes bigAnisse Astier2012-04-23
* rt2x00: Fix beacon skew in rt2800pciHelmut Schaa2012-03-12
* rt2800: Add documentation on MCU requestsJakub Kicinski2012-02-27
* rt2x00:Add RT5372 chipset supportJohn Li2012-02-27
* rt2x00:Add VCO recalibrationJohn Li2012-02-27
* rt2x00: Correctly set txmixer_gain in RT3572 channel switching.Gertjan van Wingerde2012-02-08
* rt2x00: Fix RT3572 channel switch RFCSR 7 programming.Gertjan van Wingerde2012-02-08
* rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572.Gertjan van Wingerde2012-02-08
* rt2x00: Use struct rt2x00_dev driver data in rt2800{pci,usb}.Gertjan van Wingerde2012-02-08
* rt2800: document RF_R03 register bits [7:4]Stanislaw Gruszka2012-02-06
generated by cgit v1.2.1 (git 2.18.0) at 2024-09-01 11:04:16 +0000